ILLUSTRATED PARTS LIST THIS MANUAL CONTAINS THE ILLUSTRATED PARTS LIST FOR MODELS:

Transcription

1 IPL MODEL STT-1BSG ILLUSTRATED PARTS LIST 0 29 THIS MANUAL CONTAINS THE ILLUSTRATED PARTS LIST FOR MODELS: STT-1BSG with a serial number of to SMST-61A with a serial number of to SMST-2A with a serial number of to September, 2002 PART NUMBER 0608

2 Notes

3 TABLE OF CONTENTS SUBJECT PAGE SMST 61"Adv., 2" Adv. Cutter Decks Cutter Deck Controls... - Sheet Metal Components Deck Drive Components Radiator, Coolers & Engine Brackets Brake & Steering Components Fuel & Hydraulic System Electrical System Hydraulic Pump Assembly - BDP-L Wire Harness, STT-1BSG...20 Replacement Decals... - I

4 61A, 2A CUTTER DECKS B B B 1 B 6 A A A STT-BSG 2002 CD 16 2

5 61A, 2A CUTTER DECKS Ref. Part 1 60 Cutter Deck, 61 Advantage (Includes Decals) 1 60 Cutter Deck, 2 Advantage (Includes Decals) Bolt, Carriage /16-18 x 1" Nut, Hex Serrated Flange / Wing nut, / Anti-Scalp Wheel Bolt, Carriage /8-16 x " 8 Anti-Scalp Wheel Bracket Bolt, Hex Serrated Flange /8-16 x 1" Flatwasher, /8" (.688 x 1. x.) Locknut, /8-16 Center Lock Discharge Chute, 61 & 2 Adv Bolt, Hex Head /16-18 x 1." (Front) Bolt, Hex Head /16-18 x 1.0 (Rear) Nut, Hex Elastic Stop / Nut, /8-11 UNC 0 Push Arm Shaft Bolt, Hex Head /8-11 x 9.0" Bolt, Carriage /16-18 x." Bolt, Hex Head /16-18 x." Key, 1/ x 1/ x 2" Key, 1/ x 1/ x 1." 00-0 Flatwasher,/8-.9 x.98 x.10 HD Bolt, Hex Head /16-18 x 1.0" A Bolt, Hex Head /16-18 x Nut, Hex Serrated Flange / Bolt, Hex Head 1/2-20 x." Bushing,. I.D. Oilite Lockwasher, /16" Flatwasher, /16" (. x.8 x.08) Flatwasher, /8" (.91 x.98 x.10) Nut, Hex Elastic Stop / Bolt, Hex Head /8-16 x." Bolt, Hex Head /8-16 x 2.0" 2 0 Pivot, Idler - Short Bolt, Hex Head /8-16 x 1.0" Grade Spindle Assembly 89 Spindle Shaft 8102 Seal, Top 810 Bearing Assembly 8 29 Spindle Housing 9 Spacer, Outside Spacer, Inside Seal, Bottom Ref. Part 2 29 Spindle Bushing, Bottom 810 Nut, Special 1-1/ Grease Fitting 86 Relief Fitting, Tapered Spindle 6 8 Spring, Discharge Chute 808 Guide, Roller Cutter Blade, Cutter Blade, 2." Gearbox Assembly, Deck Drive 0 88 Belt, Cutter Deck Drive, Belt, Cutter Deck Drive, Roller Shaft 2 89 Tapered Hub, 1-1/8" Bore 811 Tapered Hub, 1" Bore 611 Idler Arm, Cutter Deck 8 Bearings, Ball 6 86 Pulley, Idler Base, Idler Pivot 8 8 Pulley, 6. O.D Pulley, 6.9 O.D Mounting Plate, Gearbox 60 Belt Cover, LH Belt Cover, LH - 2 Belt Cover, RH Belt Cover, RH Pusharm (includes items, 6 & 6) Baffle, Custom Cut 61A 10 Baffle, Custom Cut 2A Nut, Hex Head /8-18 UNF 6 86 Rod End, /8" Male RH Thread Bolt, Hex Head /8-11 x -1/2" Spring, Cutter Deck 6 80 Pulley, 6. O.D Pulley, 6. O.D U-Nut, / Nut, Hex Elastic Stop / Discharge Baffle Discharge Baffle Guide Roller 2 90 Spacer, Spindle Bolt, Carriage /8-16 x 1 * Common hardware which should be purchased locally. All bolts Grade plated, all other fasteners zinc plated.

6 CUTTER DECK CONTROLS CUTTER DECK STT2002CDC

7 Ref. Part CUTTER DECK CONTROLS Flatwasher, / Link, Deck Lift 816 Rod End, Female - 1/2-20 RH 8166 Rod End, Female - 1/2-20 LH Nut, Jam 1/2-20 RH Nut, Jam 1/2-20 LH Nut, /8-16 Elastic Stop 8 89 Slide Weldment, Height Adjustment 9 91 Spacer, Decklift Pedal 10 8 Pin, Decklift 11 Swivel Joint, LH 2 Swivel Joint, RH 90 Bellcrank Weldment, LH Rear 1 90 Bellcrank Weldment, RH Rear 00-0 Locknut, /8-16 Center Lock Guide, Short Guide, Long 18 Lockplate, Decklift Deck Latch (Includes items 20& ) Bushing,.02 ID. 81 Grip, Deck Latch 898 Spring, Helper (61 & 2 Cutter Decks Only) 2 1 Foot Pedal, Height Adjustment Nut, Hex / Nut, Hex Serrated Flange / Flatwasher, /8" (.66 x 1. x.09) Flatwasher, 1" (1.062 x 1.0 x.08) Grease Fitting Cotter Pin, /16 x Nut, Hex Elastic Stop / Stud, /8-11 x.0" Ring Pin, 1/2 x.0" Ring, Retaining 1" External "E" 00-0 Nut, Hex Elastic Stop 1/ Bolt, Carriage /8-16 x 1-1/" 2 Bracket, Cutting Height Adjustment Screw, Cap /16-18 x " FHHS 8 8 Lanyard, Deck Height Pin 9 80 Chain Bolt, Hex Head /8-16 x 1-1/2" Nut, Hex Serrated Flange / Ring, Retaining 1/2" External "E" Bolt, Hex Head 1/2- x " Bolt, Carriage /16-18 x 1" Bolt, Shoulder 1/2 x /" * Common hardware which should be purchased locally. All bolts Grade plated, all other fasteners zinc plated.

8 6 SHEET METAL COMPONENTS STT-BSG 2002 SMC A A

9 SHEET METAL COMPONENTS Ref. Part Ref. Part Fender Weldment, RH Bolt, Hex Head, /16-18 x 1, Zinc 06 Spacer Flatwasher, /8-.91 x.98 x Seat Plate Weldment 6 89 Seat Assembly w/armrest Bolt, Hex Head /8-16 x Nut, Elastic Stop / Battery (Not Avail. through Scag) Pad, Battery Cover 11 2 Cover, Battery 000- Bolt, Carriage /16-18 x /" 2 Plate, Battery Box Wing Nut, 1/-20 x /" Nut, Hex Serrated Flange / Bolt, Carriage 1/-20 x 6" Rubber Pad 18 8 Spacer, Caster Wheel Bolt, Carriage /16-18 x 1" 20 8 Seal Lock Nut, /8-16, Elast. Stop 62 Main Frame Nut, Hex Serrated Flange / Screw, Hex Serrated Flange /8-16 x Fender Weldment, LH 289 Foot Plate Nut, Hex Elastic Stop / Bolt, Hex Head /8-16 x Bolt, Hex Head /8-11 x Nut, Hex Elastic Stop / Cap, Grease Nut, Hex Elastic Stop Bearing W/Race Plug, 1/- THD Form 19 Extention Weldment, Caster 2A (LH) 0 Extention Weldment, Caster 2A (RH) & 61A (LH) 1 Extention Weldment, Caster 61A (RH) 2 Extention Weldment, Caster 2A (LH) Extention Weldment, Caster 2A (RH) 810 Seal, 2.00 OD. x 1.6 Bore 00-0 Nut, Hex Elastic Stop 1/ Yoke Weldment, Caster (61A & 2A) Bolt, Hex Head 1/2- x -1/2" (2A) Bolt, Hex Head 1/2- x 9-1/2 (61A & 2A) 0 81 Sleeve, Caster Wheel (2A) 8 Sleeve, Caster Wheel (61A, 2A) 1 80 Wheel Assy (Inc.items 20, 2,,, ) Tire, x.00 -Ply (2A) 819 Tire, x 6.0 -Ply (61A, 2A) 8 Rim Assembly, 2A (Includes item ) 820 Rim Assembly, 61A & 2A (Inc. item ) 1020 Weight (61 cutter deck only) 81 Bumper, Rubber Cable, Seat Stop Bolt, Hex Head 1/-20 x 1-1/" Nut, Hex Serrated Flange 1/ Seat Adjustment, Track Set 0 61 Caster Wheel Assy (Inc. 1 thru ) 61A (LH) 618 Caster Wheel Assy (Inc. 1 thru ) 61A (RH) 619 Caster Wheel Assy (Inc. 1 thru ) 2A (LH) 60 Caster Wheel Assy (Inc. 1 thru ) 2A (RH) 1 81 Back Cushion Cover 2 8 Seat Cushion Cover 818 Arm Rest, Right Hand 81 Arm Rest, Left Hand 816 Arm Rest Cover 8 Bearing w/ Race Grease Fitting Spring, Seat 2 Pin Retainer, Spring Roll Pin, Spring /2 x / Bolt, Hex Head 1/2- x Footrest Bolt, Hex Head 1/2- x Mounting Bracket, Battery 6 22 Support Bracket, Battery Box Flat Washer 1/2-.62 x.1. x.109 * Common hardware which should be purchased locally. All bolts Grade plated, all other fasteners zinc plated.

10 8 DECK DRIVE COMPONENTS A To A B To B TO REAR OF ENGINE TO ENGINE FLYWHEEL STTBSG-DDC

11 Ref. Part DECK DRIVE COMPONENTS Ref. Part 1 Belt Guard, Rear 2 81 Hinge, Rear Belt Guard 809 Latch, Hood Carr. Bolt 1/-20 x Nut, Serr. Flg. 1/ Screw, #10-2 x., Phillips Head Lock Washer, # Nut, # Weldment, Pump Mounting Spacer, Engine 11 0 Stud, Anti-Rotation 82 Linkage Assembly, Anti-Rotation 80-0 Tie, Cable Pin, Rue Bolt, Hex Head /8-16 x Spindle Assembly, Deck Drive Clutch, Electric PTO Pulley, 6. dia. Tapered Bore 19 8 Hub, Tapered 1 dia Key, 1/ x 1/ x Bolt, Hex Head /16-18 x Pulley, 6. OD, Tapered Pulley,. OD Set Screw, /16-18 x Hub, Tapered 1mm Bore Bolt, Hex Head 1/-20 x Key, mm x mm x 0mm 8161 Belt, Pump Drive Belt, Deck Drive Key, 1/ x 1/ x Bolt, Hex Head /16-20 x Lock Washer / Flat Washer /16 x.69 x 1. x Bolt, Hex Head 1/-20 x Nut, Elastic Stop / Flat Washer /8,.91 x.98 x Key, 1/ x 1/ x Idler Arm Bolt, Hex Head /8-16 x Nut, Serr. Flg. / Pulley, PTO Idler Bolt, Hex Head /8-16 x 1. Grade Flat Washer /8 Grade 8 8 Spring 8 Bearing 6 0 Pivot, Idler - Short Bolt, Hex Head /8-16 x Base, Idler Pivot Bolt, Hex Head /16-18 x Idler Arm Pulley, Pump Idler 2 2 Spacer Bolt, Hex Head /8-16 x. Grade Lock Washer /8.68 x.80 x Nut / Nut, Elastic / Pivot, Idler - Long Bolt, Hex Head /8-16 x Nut, Elastic / Bolt, Hex Head /16-18 x Lock Washer /16 62 Brace, Engine Mounting Plate 6 81 Bumper, Rubber Nut, Serr. Flg. / Bolt, Hex Head /8-16 x Clamp, Wire Bolt, Carr. /16-18 x Driveshaft Spacer, Inside 0 29 Bushing Seal, 2.00 OD x 1.6 Bore Nut, Roller Bearing Assembly Spacer, Outside Grease Fitting 1/- Self Tapping 6 86 Relief Fitting 29 Spindle Housing Seal, 2.00 OD x 1. Bore 9 Shaft, Spindle Screw, Set /8-16 x / Nut, Center Lock / Bolt, Hex Head /8-16 x 1-/ Key, 1/ x 1/ x 1 * Common hardware which should be purchased locally. All bolts Grade plated, all other fasteners zinc plated. 9

12 10 RADIATOR, COOLERS & ENGINE BRACKETS TO "A" A ATTACHES TO FRAME

13 Ref. Part RADIATOR, COOLERS & ENGINE BRACKETS Radiator 2 8 Hose, Upper Radiator 8 Hose, Lower Radiator Lockwasher, /16 (.1 x.86 x.08) Helical Spring 2 Bracket, Air Cleaner 6 29 Bracket, Engine Mounting LH 20 Bracket, Engine Mounting RH 8 02 Bracket, Radiator Mounting 9 0 Shroud, Radiator Plate, Engine Mounting Indicator, Air Cleaner Pre-Cleaner, Engine Air (incl. item 0) 8 Hose, Air Intake Clamp, Hose (2. Dia.) 0 Hinge, Hood Clamp, Hose (1.0 Dia.) 1 Bracket, Hood Support Bracket, Exhaust Support Clamp Weldment, Muffler (Clamp and Weldment) 86 Clamp, Muffler (Clamp Only) Elbow, Exhaust 108 Screen, Debris 1082 Hood Engine, Briggs & Stratton 1 HP (Spec. # E2) Not Available Through Scag, Contact Briggs & Stratton) 2 ** Air Cleaner Assembly w/ Mounting Band (Not Available Through Scag, Contact Briggs & Stratton) 000- Bolt, Carr. /16-18 x Nut, Serr. Flng / Pin, Rue Cotter 1/2 dia Rivet, Pop 1/8 x Pad, Radiator Adaptor, Pre-Cleaner 1 ** Coolant Tank Assembly w/hose (Not Available Through Scag, Contact Briggs & Stratton) 2 08 Spacer, Radiator Bolt, Hex Head M8 x 20MM LG Nut, /16-18 Elastic Stop Engine Spacer 81 Bumper, Rubber Bolt, Hex Head /16-18 x Flatwasher, /16 (. x.8 x.08) Nut, /16-18 Elastic Stop Bolt, Hex Head /16-18 x Bolt, Hex Head /16-18 x. Serrated Flange Bolt, Carrage /16-18 x 1.0 * Common hardware which should be purchased locally. All bolts Grade plated, all other fasteners zinc plated. ** Purchase through Briggs & Stratton. 11

14 BRAKE AND STEERING COMPONENTS STT2002B&SC A TO RH PUMP TO LH PUMP B 9 B A

15 BRAKE AND STEERING COMPONENTS Ref. Part Ref. Part Grip, Handle Bar Handle Bar (Includes item 1) Bolt, Hex Head /8-16 x 1-1/" Lockwasher, /8" Flatwasher. /8" (.91 x.98 x.10) 6 2 Bar, Control Lever 18 Control Lever Weldment, LH 18 Control Lever Weldment, RH Bolt, Hex Head /16-18 x 2" Nut, Hex Elastic Stop / Bolt, Hex Head /8-16 x 2" Nut, Hex Elastic Stop 288 Mount, Control Linkage 8 Ball Bearings, Neutral Return 1 0 Spacer Pin, Rue Cotter /8 Dia Bolt, Hex Head, /16-18 x 2. Zinc Nut, Hex Elastic Stop / Bracket, Control Lever LH Bracket, Control Lever RH Bolt, Carriage /16-18 x 1" Spacer, Bearing 000- Bolt, Carriage /16-18 x /" Nut, Hex Serrated Flange / Ring, Retaining /8" External "E" 2 02 Spacer 918 Bracket, Neutral Return Bolt, Carriage 1/-20 x /" Flatwasher, 1/" (. x.0 x.06) Nut, Hex Elastic Stop 1/ Pin, Retaining Spring Spring Roll Pin, Spring /2 x /" Pin, Cotter 9/16 x 1-1/2" 886 Rod End, Male /8-2 RH Thread Nut, /8-2 RH Thread 816 Tube, Control Link Nut, Hex /8-2 LH Thread 88 Rod End, Male /8-2 LH Thread Locknut, /16-18, Elastic Stop 9 82 Gas Damper Bolt, Hex Head /8-16 x 2-1/ Grease Fitting Lever, Parking Brake (Includes item ) 88 Grip, Parking Brake Bolt, Hex Head /8-16 x 2-/" Nut, Hex Serrated Flange / Clevis, Traction Control Pin, Clevis /8-16 x 1-1/16" Pin, Cotter /2 x Rod, Parking Brake 0 8 Rod End, LH Thread Bushing, Self Align Bolt, Hex Head /16-18 x /" Bolt, Hex Hd /8-2 x -1/", 2/" Thrd 816 Switch Screw, Hex SLTD WSHR Head #10 2 x /" Brake Linkage, LH 6 Brake Linkage, RH 9 Bellcrank, Brake Actuator Spring Bolt, Hex Head 1/2- x -/" Locknut, Hex 1/2- Center Lock Bolt, Hex Head 1/2- x 2-1/2" Wheel Motor, Ross Bolt, Hex Head, /16-18 x 1., Zinc Brake Band Assembly Pin, Clevis /8" Dia. x 1.9" Spacer 6 68 Wheel Hub/Brake Drum Assembly Key, Woodruff /16 x Wheel Assembly 2 x 10.- (2 Only) 8169 Rim W/Valve Stem (2 Only) Tire, 2 x 10.- (2 Only) 8180 Wheel Assembly 2 x - Turf Master 8181 Rim W/Valve Stem 8182 Tire, 2 x - Turf Master Lug Nut, 1/ Nut, Hex Castle 2 Threaded Plate Bolt, Hex Head /8-16 x 1-1/2" 229 Plate Weldment, Motor Backing 291 Actuator Switch Bolt, Hex Serrated Flange /16-18 x /" 000- Bolt, Carriage /8-16 x -/ Bolt, Hex Head /8-16 x Switch Bolt, Hex Head /8-16 x 1-1/ Grade 8 * Common hardware which should be purchased locally. All bolts Grade plated, all other fasteners zinc plated.

16 FUEL AND HYDRAULIC SYSTEM 1 DUMP VALVE B (2) D 2 C 6 A (2) H I D B E 1 A F 9 G To Carburetor To Back Side of Reservoir (Not Shown) H 1 I G 1 Z E D F Z C 2002 STT-BSG F&HS.eps 1

17 FUEL AND HYDRAULIC SYSTEM Ref. Part U-Nut 1/ Hose Clamp, 0.69 dia Bolt, Hex Head 1/-20 x Hose, /8 ID Pushlock - (order by inch) 80 Cooler, Oil Elbow, 90 Degree - 9/16 O-ring x /8 Hose Elbow, 90 Degree - / O-ring x /8 Hose Oil Filter Base 9 86 Hose Assembly, 1/2 ID (Tank to Filter Base) Fuel Hose to Carb., 1/ ID (order by inch) 11 ** Fuel Filter 808 Fuel Hose, 1/ ID. (order by inch) 868 Valve, Shutoff Clamp, Fuel Hose /2 ID 808 Fuel Hose, 1/ ID. (order by inch) Hose Fitting Bushing Bolt, Hex Head /16-18 x1.0 Zinc Nut, Serrated Flange / Oil Filter 8 Tee, / O-ring x JIC x 1/2 Hose Nut, Hex Elastic Stop 1/ Cap, Hydraulic Tank 2 80 Insert, Filler Neck O-Ring 61 Oil Reservoir Assembly (includes 2, 2, 9) 2 82 Elbow, 90 Degree, 9/16-18 JIC x 9/16 O-Ring 81- Hose Clamp, 0.69 dia Hose, /8 ID, Pushlock (order by inch) Screw, Phillips Head, 1/ Cap 2 6 Fuel Tank Assembly (includes items 2 & 2) 81-0 Clamp, Hose 80-0 Elbow, 90 Degree, /8-1 THD Bushing, /8-1 JIC x /-16 O-Ring Ref. Part 201 Support Bracket, Fuel Tank Nut, /16-18 Serrated Flange Bolt, Carraige 1/-20 x / 9 8 Elbow, 90 Degree 0 2 Strap, Hydraulic Tank 1 28 Support Bracket, Hydraulic Tank Hose Assembly, Pump 80-0 Elbow, 90 Degree /8-1 Thread Bolt, Hex Head, 1/-20 x Lockwasher, 1/ Spring Roll Pin, Spring /16 x / 81 Bushing,.6 Dia. 8 8 Bushing,.8 Dia Clamp Plate, Pump Control Block, Pump Control Pump, Left Hand, BDP-L Nut, Hex, Elastic Stop / Bolt, Hex Head, /8-16 x 1-1/ Pump, Right Hand, BDP-L Cap, Fuel Tank W/Guage Nut, Hex Elastic Stop / Flatwasher, /8 (.91 x.98 x.10) Grade 8 8 Mounting Bracket - LH, Oil Cooler Mounting Bracket - RH, Oil Cooler Bolt, Hex Head /16-18 x / * Common hardware which should be purchased locally. All bolts Grade plated, all other fasteners zinc plated. ** Available through the individual engine manufacturer.

18 16 ELECTRICAL SYSTEM B A C C B A D D 19 8 ELECTRICAL SYSTEM

19 ELECTRICAL SYSTEM Ref. Part Cable, Positive Battery Cable, Negative Battery 616 Clutch, Electric PTO Module, Interlock 82 Battery (Not Avail. through Scag, Exide P/N R) Switch, PTO 898 Switch, Key (Includes Nut and Lockwasher) Nut, /8-2 Special Lock Washer / Cable, Control (Throttle, Choke) Switch, Seat Gauge, Water Temperature Gauge, Oil Pressure 8118 Gauge, Volts 69 Panel, Instrument Panel 1 2 Bracket, Fuse Holder Screw, #10-2 x 1. Phillips Nut, #10-2 Elastic Stop Fuse Holder w/ 20 Amp Fuse Fuse, 20 Amp Harness, Wiring Screw, #10-2 x. Phillips Nut, Hex # Lock Washer # Relay Bolt, Hex Head 1/-20 x Lock Washer 1/ 1081 Base, Instrument Panel U-Nut, 1/ Key & Ring Assembly Sender Unit, Water Temperature Switch, Low Oil Pressure Sender Unit, Oil Pressure Manifold, Oil Hose, Oil Pressure Sender Bolt, Hex Head M8-1. x Hour Meter Clamp, Cable. ID Clamp, Cable. ID 8 Boot, Positive Battery Terminal Washer, Star * Common hardware which should be purchased locally. All bolts Grade plated, all other fasteners zinc plated. 1

20 HYDRAULIC HYDRAULIC PUMP PUMP ASSEMBLY ASSEMBLY - BDP-L 16 Overhaul Seal Kit STT 2K BDP- 18

21 HYDRAULIC PUMP ASSEMBLY - BDP-L Ref. Part 1 HG 1006 Housing Kit (Includes Housing, Journal Bearing) 2 HG End Cap HG 061 Straight Headless Pin HG 06 Socket Head Screw HG 081 End Cap Gasket 6 HG 1001 Charge Pump Kit (Includes Charge Cover, Gerotor Assy., O-Ring) HG 006 Gerotor Assembly 8 HG O-Ring 9 HG 002 Charge Relief Valve Kit 10 HG Socket Head Screw 11 HG 1002 Check Valve Kit (Includes Check Plug, Spring, O-Ring, Orifice Check Valve) HG 00 Bypass Valve Kit (Includes Bypass Valve, O-Ring, Back-up Ring) HG 0619 Valve Plate 1 HG 0080 Cylinder Block Kit HG 0 Trunion Seal Retaining Ring 16 HG 100 Overhaul Kit 1 HG 02 Roller Thrust Bearing 18 HG 020 Swash Plate 19 HG Trunnion Arm 20 HG Guide Slot HG Block Spring HG Lip Seal 2 HG 0601 Pump Shaft 2 HG Ball Bearing HG Retaining Ring HG 1092 Lip Seal 2 HG Retaining Ring HG Spacer 19

22 INTERLOCK MODULE VOLT METER PTO SWITCH IGNITION SWITCH OIL PRESSURE GAUGE 20 AMP FUSE WATER TEMP GAUGE PINK LT BLUE ORG BRN BLUE LT BLUE GRN GRN W/ GRN W/WHITE RELAY WHITE W/ PINK ORG BRN BLUE W/ WHITE WHITE W/ 0 AMP FUSE YEL YEL STARTER STARTER SOLENOID STARTER GRN W/WHITE ALT PICK-UP TRIGGER GROUND IGNITION MODULE COIL #1 WHT W/ POS WHT W/PINK NEG POS COIL #2 NEG WHT W/ WHT W/BRN WHT W/ POS COIL # NEG WHT W/LT BLUE OIL PRESSURE BRAKE SWITCH LH INTERLOCK SWITCH R ED R ED R ED R ED W/WHT ORG BRN BLUE OIL PRESSURE SWITCH PTO CLUTCH RH INTERLOCK SWITCH SEAT SWITCH FUEL PUMP WATER TEMP OIL SENDER HOUR METER WIRE HARNESS, STT - 1BSG PART NUMBER 82 GRN W/WHT WHT W/ R E D GRN BLUE WHT W/ WHITE W/ 20

23 REPLACEMENT DECALS AND INFORMATION PLATES A A FORWARD F R REVERSE Heavy-Duty Commercial WARNING INSTALL BELT COVER BEFORE OPERATING MACHINE READ OPERATOR'S MANUAL 8109 OFF ON START MOWER DECK PULL OUT TO ENGAGE PUSH IN TO DISENGAGE CHOKE SLOW FAST STT-1BSG Decals

24 R REPLACEMENT DECALS AND INFORMATION PLATES STT-1BSG Decals 2