ILLUSTRATED PARTS LIST

Transcription

1 MODEL STC ILLUSTRATED PARTS LIST This manual covers the illustrated parts list for: STC8A-KA with a serial number of to 25 STC8A-20CV with a serial number of to 26 STC8A-2KA with a serial number of to 28 STC52A-23KA with a serial number of 2000 to 2 STC52A-2HN with a serial number of to 30 SMTC-8A with a serial number of to 32 SMTC-52A with a serial number of to 33 August 2003 PART NUMBER 062

2 NOTES

3 SUBJECT ILLUSTRATED PARTS LIST TABLE OF CONTENTS PAGE 8A, 52A Cutter Deck Cutter Deck Controls Sheet Metal Components Drive System Components Engine and Attaching Parts - Kawasaki & Kohler... - Engine and Attaching Parts - Honda Steering Components... - Brake Components Fuel and Hydraulic System... - Electrical System Hydraulic Pump Assembly (BDP-A) Replacement Decals Electrical Schematic (Kawasaki, Kohler & Honda)...26 I

4 52, 52A 8A & 52A" CUTTER DECKS STC 200 CD852 2

5 8A & 52A" CUTTER DECKS No. No. Description 8 52 No. No. Description Cutter Deck Advantage x 665 Cutter Deck Advantage x Spacer x x Nut, 3/8-6 Serrated Flange x x Wing Nut, 3/8-6 x x Anti-Scalp Wheel x x Bolt, Carriage 3/8-6 x x x Bracket, Anti-Scalp Wheel x x Bolt, Serrated Flange 3/8-6 x x x Flatwasher, 5/8 Hardened x x Locknut, 3/8-6 Center Lock x x 65 Discharge Chute x x 000- Bolt, Hex Head 5/6- x -/2, Rear x x 000- Bolt, Hex Head 5/6- x -3/, Front x x Nut, Elastic Stop 5/6- x x Nut, 5/8- UNC x x 5 Shaft, Roller x x Bolt, Hex Head 5/8- x -/2 x x Roller, Rear x x 000- Bolt, Hex Head 5/6- x -3/ x x Key, / x / x 2 x x Spring, Idler x x Flatwasher, 3/8 x x Bolt, Hex Head 5/6- x -3/ Grade 8 x x Nut, Serrated Flange 5/6- x x Bolt, Hex Head 3/8-6 x 3-3/ x x Bushing,.376 ID Oilite x x Lockwasher 5/6 x x Flatwasher 5/6 x x Bolt, 3/8-6 x -/2 Grade 8 x x Nut, Elastic Stop 3/8-6 x x Bolt, Hex Head 3/8-6 x 2-/2 x x Bolt, Hex Head 3/8-6 x 3.25 x x Bolt, Hex Head 3/8-6 x -/2 Grade 8 x x U-Nut, 3/8-6 x x Spindle Assembly x x Shaft, Spindle x x Seal Upper x x Bearing Assembly x x Grease Fitting x x Valve, Grease Relief x x 0 36 Housing, Spindle x x 33 Spacer, Outside x x Spacer, Inside x x Seal, Lower x x 327 Bushing, Bottom x x Nut, Special -/6 - x x Spacer, Spindle x x Cutter Blade 6.5 x Cutter Blade x Pulley, Idler 5 Dia x x 822 Bearing x x Idler Arm Assy. x x Idler Pivot x x Belt Cover LH (8A) x 52A Belt Cover RH (8A) x Belt Cover LH (52A) x 52A Belt Cover RH (52A) x Hub, Tapered -/8 Bore x x Pulley, Idler 5.0 x x Bolt, Hex Head /-20 x Grade 8 x x Pulley.75 x 8267 Pulley 5.35 x Turbo Baffle, Bolt On x 2387 Turbo Baffle Bolt On x Push Arm Shaft x x 5 66 Push Arm (Includes 6,60,62) x x Nut, 5/8- UNF x x Nut, Elastic Stop 5/8- x x Rod End, 5/8 Male RH Thread x x Bolt, Hex Head 5/8- x -/2 x x Grease Fitting, 0 Degree x x Belt, Cutter Deck Drive (8A ) x Belt, Cutter Deck Drive (52A ) x Bolt, Hex Head 5/6- x x x Spring, Discharge Chute x x Baffle Weldment, 8A x Baffle Weldment, 52A x Bolt, Carriage 3/8-6 x x x Nut, Elastic Stop 5/6- Grade 8 x x 3

6 CUTTER DECK CONTROLS CUTTER DECK STC 2003 CDC

7 No. No. Description CUTTER DECK CONTROLS 8262 Rod, Deck Lift Linkage Nut, Jam /2-20 LH Thread Rod End, /2-20 Female Thread Retaining Ring, /2 External E Slide, Deck Height Adjust Pin, Deck Lift Bracket, Cutting Height Adjustment Bolt, Shoulder /2-3/ 80- Bushing.502 ID Grip, Deck Latch Lever 662 Lever, Deck Latch (Includes &) 2236 Slide, Cutting Height Screw, Cap 5/6- x 3 FHHS 2238 Guide, Short Bolt, Carriage 5/6- x Guide, Long 7 88 Spring, Helper Nut, 3/8-6 Center Lock Flatwasher, 5/ x.3 x Nut, 3/8-6 Serr. Flange Bolt, Hex Head 3/8-6 x -/ Swivel Joint LH Cotter Pin, 3/6 x Nut, Serr. Flange 3/ Bolt, Hex Head 3/8-6 x -/ Nut, Serr. Flange 3/ Nut, Elastic Stop 3/ Chain Grease Fitting, /-28 Self Tap Nut, Elastic Stop 3/ Flatwasher, 3/8-.3 x.38 x Stud, /2-3 x Lanyard Pin Nut, 5/8- UNC Swivel Joint RH Bolt, Hex Head /2-3 x Rod End, /2-20 Female RH Thread Bolt, Hex Head 3/8-6 x 3-/ Spacer Lock Nut, / Spacer Nut, /2-20 UNF-2B Nut, Elastic Stop 5/6-50 Lift Bellcrank Weldment, LH Rear 505 Lift Bellcrank Weldment, RH Rear 00- Flatwasher, x.5 x Retaining Ring, ext Hair Pin Cotter,.77 x 3-/ * Common hardware which should be purchased locally. All bolts Grade 5 plated, all other fasteners zinc plated. 5

8 SHEET METAL COMPONENTS Section A 6 57 A STC 200 SMC 6

9 No. No. Description SHEET METAL COMPONENTS No. No. Description 6700 Main Frame Assembly w/decals Bolt, Hex Head 5/6- x 3-3/ Cushion, Back 00-0 Nut, Serr. Flange 3/ Plate, Seat Mounting 6 82 Cushion, Lower Seat Pin Retainer, Spring Spring ** Battery (not available through Scag) 2357 Battery Cover Battery Hold Down Pad Bolt, Carr. 5/6- x 3/ Battery Box Roll Pin, Spring 5/32 x 3/ Nut, Serr. Flange 5/ Bolt, Hex Head 3/8-6 x Pad, Rubber Bolt, Hex Head /-20 x -/ Nut, Serr. Flange / Seat Base Support Nut, Elastic Stop 5/ Seat Assembly w/ adj. rails 8263 Seat Assembly w/out adj. rails Arm Pad, RH 820 Bracket, Armrest RH Arm Pad, LH 82 Bracket, Armrest LH Channel, Armrest Footplate Nut, Elastic Stop 3/ Bolt, Hex Head 3/8-6 x Cable, Seat Stop Weldment, Caster Support 3 85 Cap, Grease Nut, Elastic Stop Bearing Set Plug, / Seal, 2.0 OD x.625 ID Nut, Elastic Stop / Yoke, Front Caster Wheel Bolt, Hex Head /2-3 x 7-/ Sleeve Caster Wheel Assembly (Incl. thru 5) 863 Tire, 3 x Smooth Seal Rim (Includes Item 5) 8262 Roller Bearing Fitting, Grease Mounting Bracket, Oil Tank Mounting Bracket, Fuel Tank Seat Pan 358 Spacer, Caster Wheel Bolt, Hex Head 7/6- x -/ Nut, Elastic Stop 7/ Lockwasher, 7/ Lock Washer. 3/8 Spring U-Nut, 3/ Bolt, Carriage 5/6- x Bracket, Fuel Valve Bracket, Hour Meter Bolt, Hex Head 3/8-6 x -/ 7

10 DRIVE SYSTEM COMPONENTS Section STC 2003 DSC 8

11 No. No. Description DRIVE SYSTEM COMPONENTS Nut, Elastic Stop 3/ Nut, Serrated Flange 3/ Spring, Pump Idler 3286 Spacer Bolt, Hex Head 3/8-6 x 2-3/ Idler Arm Assy., Pump Drive Key, 5 x 5 x 25mm Belt, Transmission 88 Pulley, 3 Dia. Idler Flatwasher, 3/8-.3 x.38 x Pulley, 5.5 OD Taper Bore Hub, Tapered, mm Bore Bolt, 3/8-6 x Pivot, Idler 822 Bearing Bolt, Hex Head /-20 x Grade Bolt, Hex Head 3/8-6 x 2-/ Bolt, Hex Head 3/8-6 x -/ Pulley,.5 Dia. - Bore Clamp Plate Hex Head Capscrew, /-20 x 3/ Control Lever, Pump Hex Head Capscrew, /-20 x 3/ Lockwasher, / Block, Pump Control Roll Pin Bolt, Hex Head 3/8-6 x -/2 Grade Nut, Serr. Flange 3/ Bolt, Hex Head 3/8-6 x -/2 Grade 8

12 ENGINE AND ATTACHING PARTS (KAWASAKI & KOHLER) Section STC 2003 EAPKA

13 ENGINE AND ATTACHING PARTS (KAWASAKI & KOHLER) No. No. Description KA 20CV 2KA 23KA 8282 Engine, Kawasaki (FH60V-AS2) x 8282 Engine, Kohler (PS-????) x Engine, Kawasaki (FH6V-AS27) x Engine, Kawasaki (FH680V-AS32) x Bumper, Rear x x x x Shield, Rear x x x x 00-0 Nut, Serr. Flange 3/8-6 x x x x Extension, Oil Drain 2.3 x 823 Extension, Oil Drain x x x Bolt, Carr. 3/8-6 x x x x x Bolt, 3/8-6 x Torx x x x Bolt, Hex Head 3/8-6 x -/ (6A) x Muffler x x x 8268 Muffler x Bracket, Muffler x x x x Plate, Skid x x x x 000- Bolt, Hex Head 5/6- x -/2 x x x x 000- Bolt, Hex Head 3/8-6 x x x x x Bolt, Hex Head 5/6- x 3/ x x x x Nut, Serr. Flange 5/6- x x x x Bolt, Carr. 3/8-6 x 3/ x x x x Nut, Serr. Flange 5/6- x x x x 2

14 ENGINE AND ATTACHING PARTS (HONDA) B A A B 3 STC 2003 EAPHN

15 ENGINE AND ATTACHING PARTS (HONDA) No. No. Description Engine, Honda 2 HP (GXV670TAF2) Bumper, Rear Shield, Rear 00-0 Nut, Serr. Flange 3/ Extension, Oil Drain Bolt, Carr. 3/8-6 x Adapter, Oil Filter Muffler, Honda Bracket, Muffler Plate, Skid ** Engine Oil Filter P/N 000- Bolt, Hex Head 5/6- x -/2 Filtration Products - FPE-N Bolt, Hex Head 3/8-6 x Baldwin - BT Bolt, Hex Head 5/6- x 3/ Fleetguard - HF Nut, Serr. Flange 5/6- Luberfiner - LFH Bolt, Carr. 3/8-6 x 3/ Wix Oil Filter (**See chart for other filter options) Zinga - BE Nut, Serr. Flange 5/6- * Pre-Cleaner, Engine Air (Avail. through Honda Only) *7208-ZJ-80 Holder, Air Cleaner Upper (Avail. through Honda Only) 20 *7207-ZJ-80 Rubber, Air Cleaner Holder (Avail. through Honda Only) 2 *0203-ZA0-800 Wing Nut - 6mm (Avail. through Honda Only) 22 * Grommet, Air Cleaner (Avail. through Honda Only) 23 * Cover, Air Cleaner (Avail. through Honda Only) 2 * Seal, Air Cleaner (Avail. through Honda Only) 25 * Bolt, Air Cleaner (Avail. through Honda Only) 26 * Washer, Air Cleaner (Avail. through Honda Only) 27 * Element, Air Cleaner (Avail. through Honda Only) 28 *7220-ZN2-8 Housing, Air Cleaner (Avail. through Honda Only) 2 *720-ZJ-80 Holder, Air Cleaner Lower (Avail. through Honda Only) 30 * Bolt, Flange (6mm x 6) (Avail. through Honda Only) 3 * Band, Air Cleaner Connecting Tube (Avail. through Honda Only) 32 *725-ZN2-000 Tube, Air Cleaner Connecting (Avail. through Honda Only) 33 * Band, Air Cleaner Connecting Tube (Avail. through Honda Only) 3 * Bolt, Flange (6mm x 28) (Avail. through Honda Only) 35 *7-ZN-000 Joint B, Connecting Tube (Avail. through Honda Only) 36 *722-ZN-000 Seal, Air Cleaner Housing (Avail. through Honda Only) 37 *7222-ZN2-000 Stay, Engine Air Cleaner (Avail. through Honda Only) 38 * Bolt, Flange (6mm x ) (Avail. through Honda Only) 3 * A00 Collar, Seat (Avail. through Honda Only) Elbow, 0 Degree 3/8-3/ Hose, Remote Oil Filter Inlet Filter Head Elbow, 0 Degree 3/8-3/ Tube, Union /2-3/ Hose, Remote Oil Filter Return Tube, Union /2-3/8 7 * Bolt, Flange (8mm x 6) (Avail. through Honda Only) 8 * Bolt, Flange (6mm x ) (Avail. through Honda Only) 0-0 Bolt, 3/8-6 x Torx Bolt, Hex Head /-20 x 5/ Lockwasher, / Spring * Parts Available though Local Honda Distributor Only. 3

16 3 5 Section 8 STEERING COMPONENTS , 33A , 2A To Pump 6 3 STC 2002 SSC

17 No. No. Description STEERING COMPONENTS 8230 Grip, Control Lever Handle Bar (Includes item ) Bolt, Hex Head 3/8-6 x -/ Lock Washer, 3/ Flatwasher, 3/8-.3 x.38 x Flatwasher, 5/ x.875 x Roll Pin, Spring 5/32 x 3/ Bar, Control Lever Nut, Elastic Stop 3/ Rod End, 3/8-2 RH Female Nut, 3/8-2 RH Thread Rod, Pump Control Linkage Nut, 3/8-2 UNF-2B LH Thread 8233 Rod End, 3/8-2 LH Thread 377 Pin Retainer Bolt, Hex Head 3/8-6 x -/ Bolt, Hex Head 5/6- x -3/ 3602 Spacer, Pump Dampener 235 Plate, Control Lever Bolt, Hex Head 5/6- x Gas Damper Bolt, Hex Head 3/8-6 x Block, Clamping Bolt, Carriage, 5/6- x 3/ Control Plate - LH (Includes Decal) 626 Control Plate - RH (Includes Decal) Nut, Serr., Flange, 5/ Nut, Elastic Stop / Bolt, Hex Head 3/8-6 x 3/ Shaft, Steering Control 2A 820 Block, Clamp Nut, Elastic Stop 5/ Grease Fitting, /-28 Self Tap Spacer, Control Control Lever Assy RH (Includes 3 & 35) 573 Control Lever Assy LH (Includes 3 & 35) Nut, Elastic Stop 5/ Bushing Flatwasher, -/ x /6 x 6 Ga Retaining Ring, 3/ Ext Bracket, Switch Actuator Bolt, Hex Serr. Flange 5/6- x 3/ Bolt, Carr. /-20 x 3/ 5 Bracket, Control Return Spring Pin Retainer * Common hardware which should be purchased locally. All bolts Grade 5 plated, all other fasteners zinc plated.

18 BRAKE COMPONENTS Section STC 2002 BSC 6

19 BRAKE COMPONENTS No. No. Description 00-0 Nut, Serr. Flange 3/ Spring Bolt, Hex Head 5/6- x 3/ Bolt, Hex Head /2-3 x 3-3/ Bolt, Hex Head /2-3 x 2-/ Nut, /2-3 Center Lock Wheel Motor Ross Key, Woodruff 5/6 x 638 Wheel Hub Assembly 860 Brake Band Assembly 8206 Bushing, Self Align 8680 Nut, Hex Castle.0-20 UNEF Cotter Pin, /6 x -/ Lug Nut, / (8 ) Wheel Assembly 23 x (8 ) Rim 823 (52 ) Wheel Assembly 23 x.5-82 (52 ) Rim 82 (8 & 52 ) Tire 23 x Brake Rod Stud, 3/8-2 x Nut, 3/8-2 UNF 2327 Plate Weldment, Motor Backing Clevis Pin, 3/8 x Pin, Rue Cotter 3/8 Dia Brake Linkage LH 672 Brake Linkage RH Grease Fitting, / Nut, 3/8-2 UNF Retaining Ring,.625 Ext Nut, Elastic Stop 5/ Flatwasher, 3/8-.3 x.38 x Bolt, Hex Head 3/8-6 x 2-/ Bolt, Hex Head 3/8-2 x 3-3/ Cotter Pin, 3/32 x 3/ Bolt, Hex Head 3/8-6 x -/ Brake Shaft Nut, Elastic Stop 3/ Rod End, 3/8-2 LH Thread Clevis Pin, 3/8 x Clevis, 3/ Grip, Brake Lever Nut, Serr. Flange 3/ Brake Lever (includes item 36) Bolt, Hex Head 3/8-6 x 2-3/ Nut, 3/8-2 UNF-2B LH Thread 2283 Lever, Brake 2 57 Shaft Weldment, Pivot 3 35 Pin, Pivot Bolt, Serr. Flange /2-20 x.563 * Common hardware which should be purchased locally. All bolts Grade 5 plated, all other fasteners zinc plated. 7

20 FUEL AND HYDRAULIC SYSTEM Section E 2 G M 55 3 A B A B 53 M 20 TO ENGINE L F 6 3 J F K 2 22 K G C 3 56 D C 3 6 D L E J 3 3 STC 200 FHS

21 No. No. Description FUEL AND HYDRAULIC SYSTEM No. No. Description 8263 Pump, BDP-A-36 (L.H.) 826 Pump, BDP-A- (R.H.) Elbow, 0 Degree /6 O-Ring x 3/8 Hose Fitting, /2 JIC x 5/8 O-Ring 88 Hose, 3/8 Pushlock (Specify length) Bushing Fitting Elbow, 0 Degree /6 O-Ring x 3/8 Hose Hose Clamp,.6 Dia Hose Assembly Roll Pin Fitting, /2 JIC x /2 O-Ring O-Ring Bolt, Hex Head 3/8-6 x -/ Bolt, Hex Head /-20 x -/ Lockwasher Nut, Elastic Stop 3/ Control Lever Bolt, Hex Head 5/6- x 3/ Lockwasher, 5/ Flatwasher, 5/ x.875 x Cap, Hydraulic Tank Insert, Filler Neck Control Block Clamp Plate Hydraulic Tank Assembly w/fittings O-Ring Tee Fitting, O-Ring to Barb Clamp,.6 Max. /.25 Min. Dia Bushing Elbow, 0.38 Hose Clamp Fuel Hose, / ID Bracket Fuel Valve Clamp, Fuel Hose / Hose ID Valve, Fuel Shutoff Clamp,.6 Max. /.25 Min. Dia Elbow, / NTP x 3/8 Hose Barb Nut, Serr. Flange 5/ Flatwasher, 3/8-.3 x.38 x Oil Filter 8278 Filter Head Assembly Fitting, Tee Special Cap, 3/-6 JIC Hose, Filter Inlet Fuel Tank RH Cap, Fuel Tank (incl. item #53) Tank Bushing 8 83 Elbow, 0 Degree 676 Fuel Tank LH Hose, 3/8 Pushlock Long Bolt, Hex Head 5/6- x Screw, /-20 x Gasket, Gas Tank Cap 5 ** Fuel Filter Hose Assembly Bolt, Hec Head 5/6- x -/ Nipple, Oil Filter.0- UNF-2A x -/ ** Available through the individual engine manufacturer.

22 20 Section 8 ELECTRICAL SYSTEM STC 2002 ESKA

23 No. No. Description ELECTRICAL SYSTEM 8023 Hourmeter Fuse, 20 amp Key, Ignition Nut, Hex 5/ Lockwasher, 5/8 Internal Electric PTO Clutch GT Switch, Ignition Switch, PTO 8788 Relay Lock Washer, # External Tooth Nut, Hex # Switch, N/O Panel, Instrument Choke & Throttle Control - Kawasaki (Qty 2) 8 Choke Control - Kohler & Honda (Qty ) Throttle Control - Kohler ( Qty ) 823 Throttle Control - Honda (Qty ) Switch, Seat Module, Interlock 00-0 Screw, #-32 x.5 Phillips Head ** Battery (Not Available Through Scag) Bolt, Hex Head /-20 x Nut, Hex / Cable, Battery Black (negative) Cable, Battery Red (positive) Wiring Harness, Main Pulley, 5.5 OD x.5 Bore Nut, Elastic Stop 5/6- Key Mounting Bracket, Hour Meter Screw, #-32 x.5 Phillips Head Adaptor, Wiring Harness (Kawasaki only) 820 Adaptor, Wiring Harness (Kohler only) 8270 Adaptor, Wiring Harness (Honda only) Key, / x / x 3-/ Flatwasher, 7/6-.6 x -3/ x / Lockwasher, 7/ Bolt, Hex Head 7/6-20 x 2-/2 UNF Screw, #-32 x 3/ Bolt, Hex Head 5/6- x 3/ Lockwasher, 5/ Flatwasher, 5/ x.875 x Backing Plate Rubber Pad, Clutch Stop Plate, Backing Clamp 2

24 HYDRAULIC PUMP ASSEMBLY 2 Overhaul Seal Kit PORT "A" SIDE PORT "B" SIDE 30 22

25 No. No. Description HYDRAULIC PUMP ASSEMBLY HG 7056 Housing Kit 2 HG End Cap Kit 3 HG 506 Straight Headless Pin HG 506 Hex Flange Bolt, M8-.25 x 60mm 5 HG 532 Housing O-Ring 6 HG Charge Pump Kit 7 HG Gerotor Assembly 8 HG O-Ring HG 5005 Socket Head Screw, M6 x.0-20mm HG Bypass Valve Kit HG 7052 Pumpshaft Kit HG 503 Ball Bearing, 7 x 0 x 3 HG 56 Lip Seal HG 5032 Retaining Ring HG 505 Spacer 6 HG 7033 Cylinder Block Kit 7 HG Block Spring HG Block Thrust Washer HG 5 Valve Plate 20 HG Swash Plate 2 HG 5055 Ball Thrust Bearing 22 HG Trunnion Arm 23 HG Slot Guide 2 HG Check Valve Kit (.02 Orfice) port A on Left Hand Pump, port B on Right Hand Pump 25 HG 7003 Charge Relief Kit 26 HG Trunnion Seal with Retainer 27 HG Straight Thread Plug 28 HG 5008 Straight Headless Pin 2 HG Overhaul Seal Kit 30 HG 7073 System Check Relief Kit, port B on Left Hand Pump, port A on Right Hand Pump 23

26 REPLACEMENT DECALS AND INFORMATION PLATES Section FORWARD F R REVERSE Heavy-Duty Commercial WARNING INSTALL BELT COVER BEFORE OPERATING MACHINE READ OPERATOR'S MANUAL 83 STC 200 RDP 2

27 REPLACEMENT DECALS AND INFORMATION PLATES No. No. Description Decal, Danger-Spining Blades Decal, Warning-Rotating Blades 3 83 Decal, 8A 8 Decal 52A 85 Decal, Oil Decal, Patents Decal, Traction Control 7 87 Decal, Heavy Duty Commercial 8 80 Decal, Metalcraft - Made in USA 83 Decal, Belt Cover Decal, Instrument Panel Decal, Fuel Valve Position Decal, Cutting Height Bottom Row of Holes Decal, Tiger Cub 8270 Decal, Seat Support 8257 Decal, Rear Bumper Decal, Front Footplate Decal, Discharge Chute 825 Decal, Cutting Height Top Row of Holes 8283 Decal, ROPS 3 R STC 2003 RDP2 25

28 ELECTRICAL SCHEMATIC - KAWASAKI, KOHLER & HONDA Section 8 PTO SWITCH DIODE KAWASAKI ADAPTER HARNESS KEY SWITCH RELAY WHITE MAGNETO W/YEL STRIPE FUEL SOLENOID YELLOW RECTIFIER GRN W/WHT STRIPE SOLENOID MAIN HARNESS KOHLER ADAPTER HARNESS MAIN HARNESS HONDA ADAPTER HARNESS ENGINE GROUND GRAY RECTIFIER GRN W/WHT STRIPE WHITE ENGINE PLUG YELLOW SOLENOID "B+" ENGINE STATOR BLACK YELLOW BLUE LIGHT BLUE WHITE MAGNETO W/YEL STRIPE FUEL SOLENOID SOLENOID GRN W/WHT STRIPE MAIN HARNESS SOLENOID "B+" LIGHT BLUE BLUE BLACK BLACK W/YEL STRIPE GRN W/BLK STRIPE GREEN GRN W/WHT STRIPE YELLOW WHITE WHITE YELLOW W/YEL STRIPE GREEN GRN W/WHT STRIPE GRN W/BLK STRIPE 20 AMP FUSES BRAKE INTERLOCK SWITCH PINK ORANGE L.H. NEUTRAL SWITCH BLACK GROUND BLACK BLACK BROWN SEAT SWITCH DIODE MODULE PLUG BLACK BLACK CLUTCH ORANGE W/WHT STRIPE STARTER STC Electrical Schematic Serial No & Higher NEG POS HOURMETER TO ENGINE ADAPTER HARNESS STARTER SOLENOID R.H. NEUTRAL SWITCH 26