SM-52, SM-61 & SM-72 CUTTER DECK

Transcription

1 2 SM-2, SM-1 & SM-72 CUTTER DECK SGB00 0

2 No. No. Description SM-2, SM-1, & SM-72 CUTTER DECK No. No. Description Cutter Deck (Includes decals) x 1 70 Cutter Deck (Includes decals) x 1 20 Cutter Deck (Includes decals) x 2 72 Discharge Chute x 2 72 Discharge Chute x x Bolt, /1-1 x 1" Hex Head x x x 00- Nut, /1-1 Elastic Stop x x x Wing Nut, /-1 x x x 0 Belt Cover (Incl. Decals) x 0 Belt Cover (Incl. Decals) x Belt Cover (Incl. Decals x Nut, /- Hex Head x x x 27 Spacer, Cutter Blade x x x 2 Tapered Hub, 1.12 Bore x x x Bolt, 1/-20 x / Hex Head x x x 2 Pulley,.7 O.D. x 7 Pulley,. O.D. x 7 Pulley,. O.D. x 12 2 Pulley, Double Groove,.7 O.D. x 0 Pulley, Double Groove,./.7 O.D. x Pulley, Double Groove,./.7 O.D. x 2 Belt, R.H. Blade Drive x 2 Belt, R.H. Blade Drive x 2 Belt, R.H. Blade Drive x 0 Belt, Deck Drive x 12 Belt, Deck Drive x 01 Belt, Deck Drive x Lock Nut,/-1 Hex Head x x x Stud, /-1 x -/" x x x 00-0 Nut, /-1 Serr. Flange x x x Bolt, /-1 x 2-1/" x x Flatwasher, / (.1 x. x.) x x 20 2 Pulley, Belt Guide x x 00-1 Capscrew, /1-1 x / Ser. Flg. HH x x Nut, /-1 Elastic Stop x x 2 Idler Pulley Support x x Bolt, Hex Head /1-1 x -1/" x x x Nut, /1-1 Ser. Flg. Hex Hd. x x 2 2 Pulley,.7 x x x Nut, 1/2- Ser. Flg. Hex Hd. x x x Capscrew, 1/2- x 1-1/ Ser. Flg. x x x Nut, /-1 Elastic Stop x x x Flatwasher, / (.1 x. x.) x x x 1 11 Pulley x x x Flatwasher, / (.7 x 1.0 x.00) x x x 077 Spacer x x x 01 Idler Arm (Incl. 7 & ) x x x Bolt, /-1 x 2-1/" x x x 07 Idler Pivot x x x Bushing, Bronze Oilite-/ ID x x x -0 Grease Fitting, Str. 1/-2 Self Tap. x x x Flatwasher, / (.77 x 1.2 x.0) x x x 001-0S Flatwasher, / (.77 x 1.2 x.0) x x x Retaining Ring,.7 ET 'E' x x x 1 02 J-Rod Idler Pulley x x 07 J-Rod Idler Pulley x Bolt, /1-1 x 1-1/"Hex Head x x x 00-0 Nut, /1-1 Ser. Flange x x x Bolt, /-1 x -1/2" Hex Head x x x 2 Pulley, Deck Drive Idler x x x Retaining Ring, 1-1/ ET 'E' x x x Bushing, Bronze Oilite- 1-1/ ID x x x 2 Idler Pivot Support x x x 277 Spacer x x x 0 7 Idler Arm (Incl. & 7) x x x 1 07 J-Rod, Drive Idler x x x 2 0 Spring, Chute Return x x x 1 Spindle Assembly x x x 2 Shaft, Cutter Spindle x x x 2 Seal, 2.00 O.D. x 1.0 Bore x x x 22 Bearing Assembly x x x Flat Washer, /1 (.7 x.7 x.0) x x x 77 Relief Fitting, Cutter Spindle x x x 2 Spindle Housing x x x 0 12 Spacer, Outside x x x 1 2 Spacer, Inside x x x 2 2 Seal, 2.00 O.D. x 1-/ Bore x x x 27 Spindle Bushing Bottom x x x Nut, 1-1/1-1 UNEF-2B x x x Bolt, /- x -1/2" x x x 000- Flatwasher, / (. x 1.7 x.) x x x 7 Cutter Blade, 1" Standard x 1 Cutter Blade, 1" Hi-Lift x 1 Cutter Blade, " Standard x 0 Cutter Blade, " Hi-Lift x 2 Cutter Blade, 2" Standard x 00-0 Key, 1/ x 1/ x 2" x x x Bolt, /1-1 x /" Hex Head x x x 70 0 Shaft, Roller x x x 71 0 Guide, Roller x x x Wheel Assy., Caster x x x Tire Only, Caster Wheel x x x 00-0 Inner Tube Only, Caster Wheel x x x Rim Pair, Caster Wheel x x x Retainer, Caster Wheel x x x 7-0 Grease Fitting, Deg. 1/-2 x x x Hub Assy. W/Bolts, Caster Wheel x x x Tapered Hex Nut, /1-1 x x x Roller Bearing, Caster Wheel x x x 0 07 Caster Wheel Assembly x x x Bolt, 1/2- x -1/2" Hex Head x x x Nut, 1/2- Elastic Stop x x x 022 Sleeve, Caster Wheel Bearing x x x 00 Caster Yoke x x x Spacer, Caster Yoke 1/2" x x x 0-01 Bushing, 7/ x 1" Flanged x x x 7 02 Support Assembly (Incl. -) x x x Lock Washer, /1 x x x Quick Pin x x x 0 0 Shield, Spindle x x x

3 ENGINE DECK SGB

4 ENGINE DECK Carriage Bolt, 1/-20 x 2 70 Battery Box Nut, Wing 1/ Battery 22 Battery Cover 0 Insulation, Battery Cover 7 22 Pad, Fuel Tank Strap Cap, Fuel Tank Fuel Tank Assy. (Includes items - ) 0 Bushing, Fuel Tank Valve 0 Fuel Shut Off Valve 12 2 Strap, Fuel Tank 00- Phil RDHD Machine Screw 1/-20 x Hex Nut, 1/ Pad, Fuel Tank Support Carriage Bolt, /1-1 x / 277 Support, Fuel Tank 1 22 Bracket, Fuel Tank Support 00-0 Serr. Fl. Hex Nut / Lockwasher, /1 Int. Tooth Engine, 20 HP Kohler CV 7 Engine, 22 HP Kohler CV Hex Head CPSCR, /1-1 x 1 / Oil Drain Extension 2 27 Cap, Oil Drain Plug 2 Engine Deck Wire Loom,.0 I.D Washer, 1/ (.12 x.70 x.0) Bolt, Hex Head 1/2- x Sleeve, Shock Absorber Mount 0 1 Shock Absorber Hex Locknut, Elastic Stop 1/ Serr. Fl. Hex Head CPSCR, 7/1- x Serr. Fl. Hex Nut, 7/1-7 Motor - White (Includes item 2) Lockwasher, 1/2 A Nut, 1/2-2 Anchor, Brake Bolt, Hex Head 1/-20 x 1-1/ Serr. Fl. Hex Nut, 1/ Serr. Fl. Hex Head CPSCR, /1-1 x Parking Brake Assembly Brake Pads- Pair Springs - Pair 1-0 Actuating Arm, Incl. Pin & Clip) 1-0 Clip 2 Hub Assembly (Includes item 0) Brake Drum 7 Rim and Tire Assembly (Includes items, ) -02 Tire 20 x x, Ply 1-0 Rim Only Bolt, Hub Wheel Nut 2 0 Castle Nut, UNEF Spacer, Clutch 00-0 Key, 1/ x 1/ x 1-1/ Hex Socket Set Screw, /1-1 x / 72 Pulley, Engine Pump Drive (Incl. ) 7 7 Clutch, Electric Flatwasher, 7/1 (. x 1.0 x.2) Lockwasher, 7/ Bolt, Hex Head 7/1-20 x Hex Locknut, Elastic Stop / Backing Plate, Clutch Stop Rubber Pad, Clutch Stop Flatwasher, /1 (.7 x.7 x.0) Bolt, Hex Head /1-1 x 1-1/ Key, Woodruff /1 x / 7 1 Pulley, Pump Input 7 Sleeve, Idler Ring, Retaining, 1-/1 Internal 70 Belt, Pump Drive Pulley, Idler-Traction Drive (Incl.,,72) 72 2 Bearing, Idler Pulley 7 0 Spacer, Idler 7 27 Pump Idler Arm (includes items 7, 7) 7 07 Idler Pivot Base Bushing, Oillube S Flatwasher, / Ring, Retaining, / Ext. "E" 7-0 Grease Fitting Hex Nut, Jam / Bolt, Hex Head /-1 x -1/ 2 2 Spring, Pump Drive Idler 00-0 Serr. Fl. Hex Nut, / Cotter Pin, /2 x Bolt, Hex Head /-1 x Socket Head CPSCR, 1/2- x 1-1/ Lockwasher, 1/ Flatwasher, 1/2 (.1 x. x.) 00 Pump, Sundstrand 0 20 Bracket, Oil Tank Support Bolt, Hex Head /-1 x 1-/ Washer 2" OD, / ID, 1 Ga Carriage Bolt, 1/-20 x / 2 Guard, Pulley Gusset, Battery Box 70 Support, Battery Box Carrage Bolt, /1-1 x 1" 00- Wire Loom,.7 I.D. 1 Rubber Pad 0 0 Fuel Hose, 2"** Clamp, Fuel Hose Bolt, 1/2- x 2.0" 00-0 Nut, 1/-20 Elastic Stop ** When ordering hose p/n 0 (ref. 0) include the length of the hose you need. Hose is now sold in bulk to reduce inventory.

5 UPPER HYDRAULICS A A 1 1 SGB027

6 UPPER HYDRAULICS 1 7 Tank, Hydraulic 2 Cap, Hydraulic Tank Hose, Pump to Oil Cooler 2 Hose, Oil Cooler to Tank -0 Clamp, Hose -01 Coupling, Flare Swivel Tube, Union Oil Cooler Assembly Carriage Bolt, /1-1x / 27 Bracket, Oil Cooler 0-0 Elbow, 0 Degrees O-Ring -02 Coupling Flare Swivel 00-0 Serr. Fl. Hex Head Nut, / Brace, L.H. Cooler Support 1 21 Brace, R.H. Cooler Support 00-0 Elastic Stop Nut, 1/ Serr. Fl. Hex Head CPSCR, 1/-20 x / 2 Strap, Oil Tank 20 7 Filler Neck Insert 2 Hose, 1/" Pushlok x 27"** Clamp 2 0 Bushing 2 0 Degree Elbow * Common hardware which should be purchased locally. All bolts grade plated, all other fasteners zinc plate. ** When ordering hose p/n 2 (ref. ) include the length of the hose you need. 7

7 H G A B C D E F C G D E J F B A H J I I LOWER HYDRAULICS

8 LOWER HYDRAULICS Capscrew, 1/-20 x1/2 Serr. Fl. Hex Head Filter Head 7 Filter, Spin-On Lube 1 Hose Assembly Hose Assembly 0-0 Elbow, 0 Degrees Hairpin Cotter 0 Lever, Dump Valve -02 Connector, Flare Swivel with Hose Barb -0 Hose Clamp 2 Hose, 1/ Pushlock x 27.0" ** 12 2 Hose, 1/ Pushlock x 12.0" ** 0-01 Hose Clamp -01 Tee Union, Pushlock Hose 1 2 Hose, 1/ Pushlock x 12.0" ** 1 Hose, Dump Valve 0-0 Elbow, 0 Deg. 1 Inlet Hose, /" ID 7-01 Tee, 1/2" Run 20 0 Motor Hose Hose, Pump To Oil Cooler Coupling, Flare Swivel 2-02 Coupling, Flare Swivel With Barb Tube Union 2-01 O-Ring Bushing O-Ring O-Ring O-Ring Cap 0-02 Tee, Jic to O-Ring 1 02 Hose,.0" ** 2-01 Compression Fitting 0-12 Elbow, 0 Deg. * Common hardware which should be purchased locally. All bolts grade plated, all other fasteners zinc plate ** When ordering hose p/n 02 include the lenght of the hose you need. Hose is now sold in bulk to reduce inventory.

9 CONTROL LINKAGE sgb0

10 CONTROL LINKAGE 1 2 Control Linkage, Bellcrank (Includes 0, 1) Flatwasher, /1 (.7 x.7 x.0) Bolt,Hex Head /1-1 x 2-/ Bolt, Hex Head /-1 x Flatwasher, / (.0 x.12 x.0) 2 Sleeve, Pump Control Link 7 2 Link, Speed Control 00-0 Hex Locknut, /-1 Control Arm, Pump Carrage Bolt,RH SH SQNK /-1 x 1-1/ Flatwasher, / (.1 x. x.) 12 Rod End, RH Female THD / Hex Locknut, Elastic Stop / Hex Nut, / Control Rod 1 12 Bolt Hex Head, /-2 x -/ 27 Bushing, Spring Keeper 1 Spring, Neutral Return 2 Retainer, Neutral Spring Carrage Bolt, /1-1 x Serr. Fl. Hex Nut / ** Number Not Used Bolt,Hex Head 1/-20 x 1-1/ Hex Locknut, Elastic Stop 1/ Hex Locknut, Elastic Stop / Sleeve, Control Arm Cotter Pin, /2 x Clevis, Pump Control Pin, Clevis / 0-0 Greese Fitting, 1/-2 Self Tap Bushing, Bronze

11 C A E F INSTRUMENT PANEL AND ELECTRICAL COMPONENTS D 1 B 7 sgb0

12 INSTRUMENT PANEL AND ELECTRICAL COMPONENTS 1 22 Instrument Panel (includes Decal) 2 2 Blade Fuse, 20 amp. Decal, Instrument Panel 02 Hour Meter (includes Bracket and Hardware A, B, C) A * Hour Meter Bracket B * Lockwasher, # Ext. Tooth C * Hex Nut, Ammeter (Includes Bracket and Hardware D, E, F) D * Ammeter Bracket E * Lockwasher, # Int. Tooth F * Hex Nut, # Phillips Rd. Head Screw, #-2 x 1-1/2 7 2 Bracket, Fuse Holder Elastic Stop Nut, # Carriage Bolt, /1-1 x / Phillips Washer Head Screw, #-2 x.0 7 Keyswitch 12 * Lockwasher, / Int. Tooth * Nut, Special / Ignition Key and Ring Assy. 1 1 Choke Control (includes hardware) 1 7 Throttle Control Lockwasher, # Ext. Tooth Hex Nut, #-2 77 Switch, PTO 20 * Nut, Special 1/ Serr. Fl. HH Nut, / Battery Bolt, Hex head 1/-20 x 1/ Hex Nut 1/-20 2 ***** See Lockwasher /1 Int. Tooth 27 Engine, 20 HP Kohler CV 7 Engine, 22 HP Kohler CV 2 7 Switch, Parking Brake 2 7 Switch, Foot Safety 0 7 Clutch, Electric Carriage Bolt, /1-1 x / Wireloom 00- Locknut, Elastic Stop / Battery Cable, " Black 02- Battery Cable, 2" Red 12 Wire Harness, STHM 7 7 Relay 127 Wire Harness With Relay * Common hardware which should be purchased locally. All bolts grade plated, all other fasteners zinc plate.

13 RIDER FRAME ASSEMBLY A sgb0 7,

14 RIDER FRAME ASSEMBLY Ref. No. Part Number Description 1 71 Steering Frame (Includes Bshgs and Fittings) Bronze Bushing, 7/ ID x 1.0 Flanged Retaining Ring, 7/ external 00- Hex Nut, Elastic Stop / Flat Washer, /1 (/ x 7/ x ga.) 02 Steering Handle (includes item 7) 7 Grip Bolt, Hex Hd., /1-1 x 1-/" 0 Seat Assy. (includes items thru 1, 7 & ) 70-0 Cushion Assembly 70-0 Arm Pad - R.H Seat Back Cusion 70-0 Arm Pad L.H Serr. Fl. HH. Nut, / Seat Adjuster Track Bolt, RDHD Carr. /-1 x 1-1/2 (2" & 1") Bolt, RDHD Carr. /-1 x 2.0" (72") 2 Seat Plate 1 22 Ballast, Seat Mount (72" cutter deck only) 00-0 Serr Fl. Hex Nut, / Seat Spring Bolt, Hex Hd., 7-1- x -1/ Reinforcement, Seat Spring Retaining Ring, 1-1/" external Bushing, Oilite - 1-1/ ID x 1.0 Flanged 2 00 Rear Wheel Pivot Bolt, Hex Hd., /-1 x 1-1/ 27 * Hex Jam Nut, /-2 2 * Lock Washer, / Internal Tooth 2 0 Rear Wheel Yoke Hex Elastic Stop Nut, / Bolt, Hex Hd. /- x " Spacer, Rear Wheel, short 00-0 Seal, Grease 00-0 Bearing Cone 00-0 Bearing Cup 00-0 Rim Only 7 00 Rear Wheel Assy. (Includes items -, 7A) 7A Tire Only 0 Sleeve, Rear Wheel Spacer, Rear Wheel 0 2 Cable, Steering (Includes Hardware) 1 0 Pedal, Foot Safety Switch 2-0 Grease Fitting 00- Hex Elastic Stp Nut, 7/1-00- Screw, Phillips flat hd #-2 x /" Serr. Fl. Hex Nut, 1/-20 Spring, Foot Safety Switch Hex Nut, Elastic Stop Lock, 1/-20 7 Switch, Foot Safety Bolt, Hex Hd., 1/-20 x 1-/ 0 00 Steering Shaft Retaining Ring / Ext. E Bushing, oillube - / ID x Foot Pedal 70-0 Screw w/washer, 1/-20 x Flat Washer, / x 1-1/ x 1 Ga. 0 Foot Pedal Arm Pin, Drive Lock /1 x 1-1/" 0-0 Bushing, oillube - / x.0 Flanged Sulky Mtg. Brkt. L.H. 0 2 Sulky Mtg. Brkt. R.H Bolt, Hex Hd., 1/2- x -1/2" 2 20 Pulley, Winch Cable 0-0 Bushing, oillube - 1/2 ID x Flat Washer, 1/2 (.2 x 1.7 x.) 02 Retainer, Winch Cable Hex Elastic Stop Nut, 1/ Arm rest Bracket, Left Hand 1-02 Arm rest Bracket, Right Hand * Common hardware which should be purchased locally. All bolts grade plated, all other fasteners zinc plate. 1

15 BRAKE LINKAGE Deck Weldment

16 BRAKE LINKAGE Serr. Fl. HH Nut, / Hex Locknut, /-1 02 Swivel Hairpin Cotter (.0 x 1.2) Hex Head Bolt, /-1 x 1-1/ 2 Sleeve, Hydro Linkage 7 Link, Cam 2 Grip, Parking Brake 0 Handle, Parking Brake Flat Washer, / (.1 x. x.) 00-0 Hex Nut, Elastic Stop / Carriage Bolt, /-1 x 1-1/ Hex Head Bolt, /-1 x 1-/ Lever, Brake Hex Jam Nut, / Washer, Neutral Lock Serr. Fl. HH CPSCR, /-1 x Bracket, Neutral Lock 0 Rod, Neutral Lock 20 1 Cable Assembly, Parking Brake R.H. 0 Cable Assembly, Parking Brake L.H Cable Winch Eye Bolt, /-1 R.H Hex Nut, /-1

17 ELECTRICAL SYSTEM INSTRUMENT PANEL * AMMETER * HOURMETER KEY SWITCH MTG. MOWER ENGAGE SWITCH MTG. Note: Rear View * Of Connectors YEL RED WHT * RELAY L RED * KEY SWITCH M S RED YEL FUSE HOLDERS * PTO SWITCH RED G B A GRN YEL WHT WHT * FOOT INTERLOCK SWITCH WHT GRN BLUE WHT BRAKE INTERLOCK * SWITCH YEL GRN TO ALTERNATOR (PURPLE) RED STARTER/SOLENOID GRN BLUE RED * ELECTRIC CLUTCH GRN RELAY TO MAGNETO (WHITE) ENGINE BLUE 1 RED BATTERY 2 POSITIVE TO START AND CHARGING SYSTEM NEGATIVE TO KILL MAGNETO BATTERY CABLE sgb Battery Cable, " Black 2 12 Rubber Boot 12 Wire Harness, STHM 02- Battery Cable, 2" Red 2 Fuse, 20 AMP Blade Automotive 127 Wire Harness With Relay NS 02-0 Cable Tie 1

18 WINCH LIFT SYSTEM Steering Frame sgb00 Ref. No. Part Number Description 1 0 Winch Assembly (Incl. 1-7, -, 1-2) Locknut, 7/1-00 Ratchet Pawl 20 Ratchet Bolt 2002 Flatwasher 01 Ratchet Spacer 7 20 Ratchet Spring 27 Cable Guide 0 Winch Cable Assembly 00-0 Hex Locknut, 1/ Winch Reel Reel Shaft 200 Hex Locknut, /-1 0 Winch Handle Handle Nut 1 20 Handle Spring 20 Shaft Bushing 1 0 Pressure Washer 0 Ratchet Wheel Pressure Plate 2000 Shaft Bushing E-Ring Drive Shaft Serr. FLG HH CPSCR, /-1 x Serr. FLG HH Nut, /-1 * Common hardware which should be purchased locally. All bolts grade plated, all other fasteners zinc plate.

19 R HEAVY DUTY COMMERCIAL REPLACEMENT DECALS & information 1 2, 2a, 2b OFF MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING PATENTS:,7,00,1,2,,0,,,20,7,,,7, PATENTS PENDING HYDROSTATIC DRIVE START / DRIVE PROCEDURE ENGAGE PARKING BRAKE DISENGAGE MOWER DECK DRIVE DEPRESS FOOT INTERLOCK SWITCH (LH) PEDAL START ENGINE RELEASE PARKING BRAKE CAUTION SELECT FORWARD OR REVERSE SPEED WITH BEFORE OPERATING HYDRO CONTROL (RH) READ OPERATINGS PULL UP AND PUSH PEDAL MANUAL AND SAFETY INSTRUCTIONS FORWARD TO ENGAGE OFF MOWER DECK ON IMPORTANT ON ALWAYS TRANSPORT WITH MOWER DECK DOWN AND LIFT CABLE SLACK. START MOWER DECK OFF MOW WITH WINCH CABLE SLACK TWO FULL TURNS. ON PARKING BRAKE FAST SLOW CAUTION PULL BACK TO DISENGAGE KEEP BYSTANDERS AWAY 7,, Decal, Heavy Duty Commercial 2 Decal, Scag Logo ( Cutter Deck) 2a Decal, Scag Logo (Battery Box Front) 2b 2 Decal, Scag Logo Seatback 071 Decal, Danger-Spinning Blades 0 Decal, Warning-Rotating Blades Decal, Patent Decal, Instrument Panel 7 Decal, Warning-Belt Cover Decal, Dump Valve 0 Decal, Metalcraft-Made In USA Decal, 2 20 Decal, Decal,

20 LUBRICATION & MAINTENANCE * Lubrication may be required every to 0 hours, depending on climate and environment. Break-In + Compatible Greases: Mobilux #2 found at Mobil Service Stations (1st Hours) Ronex MP found at Exxon Service Stations Hours (Daily) Super Lube MEP #2 & Super Stay-M #2 found at Conoco Service Stations 2 Hours Shell Alvania #2 found at Shell Service Stations 0 Hours (Weekly) Lidok EP #2 found at industrial shops 0 Hours (Biweekly) 200 Hours (Monthly) 00 Hours or Annually PROCEDURE COMMENTS Check all hardware for proper tightness Change engine oil and filter at hours Check hydrostatic oil level Check belt tension Add oil as needed - SAE W0 * Fill fuel tank before starting Check engine oil Clean blower screen Remove debris from under belt cover Sharpen cutter blades Grease spindle bearings 2 pumps of hand gun Clean air filter/check for damage or loose parts Check/clean air intake and cooling areas 1 Check tire pressure Do not over fill MORE OFTEN IF NEEDED US Lithium MP White Grease 2+ MORE OFTEN IF NEEDED MORE OFTEN IF NEEDED Add or adjust as required Service precleaner element 1 Check battery electrolyte level Distilled water only Grease caster wheel bearings Grease caster wheel pivots Grease idler arm pivots Service air cleaner element 1 Change engine oil Check spark plug condition and gap Clean cooling areas 1 Chassis grease Chassis grease Chassis grease See engine mfg. information See engine mfg. information Check all hardware for proper tightness Change engine oil filter Check hydro fluid reservoir level Clean and adjust spark plugs Grease rider frame pivot Grease control bell cranks Grease steering handle bearing Grease foot pedal bearings Grease rear wheel pivot (vertical) Grease rear wheel bearing See engine mfg. information See engine mfg. information Chassis Grease Chassis Grease Chassis Grease Chassis Grease Chassis Grease US Lithium MP White Grease 2+ Drain hydraulic system and replace fluid Change hydrostatic oil filter Use SAE W0 motor oil Clean area before removing filter 1. Perform these maintenance procedures more frequently under extreme dusty or dirty conditions.

21 TECHNICAL SPECIFICATIONS ENGINES General Type: Brand: Models: Horsepower: Type: Displacement: Cylinders: Governor: Air Intake Group: Exhaust Group: Fuel Pump Group: Oil Pump Group: Valve Group: Starter/Electrical: Charging System: ENGINE DECK Fuel Tank: Drive Wheels/Tires: Brakes: Parking Brake: Frame: DRIVE SYSTEM Type: Hydro Pumps: Drive Wheel Motors: Dump Valve: Hydro Fluid Cooling Group: Travel Control: Steering: Axles: Safety Group: Instrument Panel: Forward Speed Range: Reverse Speed Range: Heavy duty industrial/commercial Kohler 20 HP Command & 22 HP Command CV20S, CV22S 00 RPM, 00 RPM cycle gas, twin cylinder, vertical shaft engine 20 HP= 2 cc, 22HP = 2 cc 2 cast-iron sleeves Mechanical type governor with variable speed control set at 00 rpm (+7 rpm), idle set at 1200 rpm (+7 rpm) Large capacity dual element, chopper-type grass screen Single exhaust canister muffler Mechanical fuel pump with inline fuel filter, fixed jet carburetor with Smart-Choke TM and fuel shutown solenoid Positive displacement Gerotor TM oil pump with remote oil filter and 1-inch oil lines, capacity 2.0 U.S. quarts with filter, standard oil cooler Hydraulic valve lifters standard 12 volt battery with alternator, solid state ignition with key start 1 amp gallon (.0 litres) seamless polyethylene 20x.0- four-ply pneumatic tubeless, radius edge Integral braking with drive system Drum-type Hybrid tractor trailer frame with stabilized pivot Hydro drive with one variable displacement pump and two cast-iron high torque motors #1 cast-iron variable displacement pump with remote dump valve for movement without running engine 12 cu. inch cast-iron high torque motors Single lever allows for movement without engine running Heavy-duty cooling radiator, qt. capacity nylon cooling reservoir, uses, SAE W0 fluid and micron filter Hydro drive with single foot pedal for forward and reverse speed control, infinitely variable speeds Aircraft-type yoke steering handle with stainless steel cable 1-1/" tapered motor shafts Foot actuated engine kill, brake interlock, blade/clutch interlock switch Ammeter, hour meter, key switch, throttle, fuses, manual choke, blade brake clutch switch 0 to. mph 0 to. mph Date of Issue: July 1, Specifications Subject to Change Without Notice 22

22 TECHNICAL SPECIFICATIONS (CON'T) CUTTER DECKS SM 2, SM 1, SM 72 Type: Out-front design with anti-scalp roller and pneumatic shock absorber for deck flotation Construction: -gauge steel with 7-gauge (/1") steel skirt Cutting Width: 2.0 " (2.0 cm), 1.0 " (1.0 cm), 71." (11. cm) Cutting Height Adjustment: Adjustable from 1-/" to -1/" in 1/" increments Cutter Blades:.20 thick, milled edge, alloy steel SM2: Three() 1" blades SM1: Three () " blades SM72: Three () 2" blades Blade Engagement: Electric blade brake clutch with instrument panel switch Lift System: Patented manual winch with automatic brake/clutch, stainless steel cable Discharge Opening: Extra wide.",.7 " discharge opening with hinged chute Caster Wheels: x. smooth tread flotation, inner tubes, split rims, roller bearings, with quick pin removal Spindles: Cast housing, taper roller bearing, low maintenance with top access grease fitting and grease overfill relief poppet Pulleys: Cast-iron with easily removed taper hubs Cutter Deck Belts: B-section with Kevlar cord ADDITIONAL SPECIFICATIONS Seat: Foam padded, lever adjustment forward and back, with padded arm rests OPTIONAL ITEMS/ATTACHMENTS Grass Catcher: GCV/HD-/ Vacuum Grass Catcher with HP engine, gallon capacity, hard plastic cover, mounts on rear bumper Mulching Kit: Steel plate fits over discharge opening. No blade change or or removal required. Installs and removes in the field. Electric Deck Lift: Lift mounts to the side of the rider frame assembly to raise and lower the deck at the flip of a switch. Fits on machines starting with the model year. APPROIMATE DIMENSIONS SM2 SM1 SM72 Length:.0" 0.0".0" Length with Grass Catcher: 0.0".0".0" Tracking Width: 0.0" 0.0" 0.0" Width: 1.0" 70.0" 1.0" Width (with discharge chute up):.0".0" 7.0" Width with GCV grass catcher: 70.0" 70.0".0" Height:.0".0".0" Height with GCV grass catcher: 1." 1." 1." Weight: lbs. 0 lbs. 00 lbs. Weight with GCV grass catcher: 12 lbs. 120 lbs. 00 lbs. Date of Issue: July 1, Specifications Subject To Change Without Notice 2