Parts Manual for PRO GEAR EXPRESS MID-SIZE WALK BEHIND MOWERS SERIES 0 & 1 POWER UNIT MODEL SPE1250KW SPE140KW SPE150KH SPE151KW SPEL150KH

Size: px

Start display at page:

Download "Parts Manual for PRO GEAR EXPRESS MID-SIZE WALK BEHIND MOWERS SERIES 0 & 1 POWER UNIT MODEL SPE1250KW SPE140KW SPE150KH SPE151KW SPEL150KH"

Poppy Lewis
5 years ago
Views:

1 Parts Manual for PRO GEAR EXPRESS MID-SIZE WALK BEHIND MOWERS SERIES 0 & 1 POWER UNIT MODEL SPE10KW SPE0KW SPE10KH SPE11KW SPEL10KH MOWER UNIT MODEL SPE30 SPE480 SPE31 SPE481 IT IS POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRATICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY. COPYRIGHT 00 SNAPPER INC. ALL RIGHTS RESERVED (Rev. 4, 0/30/0) MANUAL No. 07

2 CONTENTS DESCRIPTION PAGE CASTER WHEEL & TIRE ASSEMBLY...3 FUEL TANK & BRACKET ASSEMBLY... 4 & ENGINE GROUP... & 7 TRANSMISSION DRIVE GROUP... 8 & REAR DECK, DRIVE IDLER, BRAKE & IDLER PULLEY ASSEMBLIES & 11 PISTOL GRIP HANDLE & CONTROL ASSEMBLIES... 1 & 13 LOOP HANDLE & CONTROL ASSEMBLIES DECALS TRACTION, REAR WHEEL ASSEMBLY... BRAKE ASSEMBLY DECK IDLER ASSEMBLY DECK IDLER ASSEMBLY... CUTTER HOUSING ASSEMBLY... & 7 3 MOWER DECK ASSEMBLY... 8 & 48 MOWER DECK ASSEMBLY & 31 ELECTRICAL COMPONENTS (Pistol Grip Handle)...3 WIRING SCHEMATIC (Pistol Grip Handle)...33 ELECTRICAL COMPONENTS (Loop Handle)...34 WIRING SCHEMATIC (Loop Handle)...3 MANUAL No. 07 PRO GEAR EXPRESS

3 CASTER, WHEEL & TIRE ASSEMBLY A, 18B ASSEMBLY, Wheel & Tire - Grey (Includes Items 3 & 4) ASSEMBLY, Wheel & Tire White (Includes Items 3 & 4) -34 RETAINER, Flanged () TIRE, X 3.0 4, 4 Ply Smooth Tread ASSEMBLY, Wheel (Includes Items,, 1, 17 & 18) -3 BEARING, Roller -11 SLEEVE, Axle 7-1 NUT, 1/-13 Hex Nyloc 8-13 BOLT, 1/-13 X -1/" Hex Head Cap, Grade YOKE, Caster (weldment) PIN, Lynch 7/1" Heavy Duty SPACER (4) 1-10 SPACER, PM BUSHING, 1" -3 BUSHING, Caster () FITTING, 1/4-8 Straight Lube VALVE STEM FITTING, 1/4-8 4 Degree Lube 18A RIM, One Piece Steel, Gray 18B -871 RIM, One Piece Steel, White MANUAL No. 07 PRO GEAR EXPRESS 3

4 FUEL TANK & BRACKET ASSEMBLY B A A NOTE: 1B SHOWN ON NEXT PAGE () () ASSEMBLY, (AFTER ADJUSTING) MANUAL No. 07 PRO GEAR EXPRESS 4

5 FUEL TANK & BRACKET ASSEMBLY 0 1B TANK BRACKET GROUP (Includes Items 1A thru 17) TANK BRACKET GROUP (Includes items 1B thru 0) (used on Model SPEL10KH only) 1A TANK BRACKET, Express 1B TANK BRACKET, Express (Loop Handle) A 4-43 TANK, Fuel (With Cap) B -803 CAP, Fuel Tank STRAP, Tank () SCREW, #10-4 x -1/" Pan Head Machine () -10 NUT, #10-4 Hex Nyloc () -4 ASSEMBLY, Shift Bellcrank, Express WELDMENT, Shift Bellcrank FITTING, 3/1" Lube BEARING, /1" Flange () 7-11 BOLT, 3/8-1 x.44 Shoulder WASHER, /1" Flat Narrow Type () -4 SHIFT LINK ASSEMBLY, Express (Includes Items 10 thru 1) BALL JOINT () ROD, 1/4-8 x.71 Threaded 1-10 NUT, 1/4-8 Hex, Grade or B WASHER, 1/4 Spilt Lock -181 NUT, 1/4-8 Hex Nyloc 1-18 NUT, 3/8-1 Hex Center Lock BOLT, 3/8-1 x 1" Short Neck Carriage, Grade () 17-1 NUT, 3/8-1 Hex Nyloc () TANK BRACKET, Upper BOLT, /1-18 x 1 Short Neck Carriage, Grade (3) 0-18 NUT, /1-18 Hex Nyloc (3) PRO GEAR EXPRESS MANUAL No. 07

6 ENGINE GROUP MANUAL No. 07 PRO GEAR EXPRESS

7 CLAMP, Fuel Hose ENGINE GROUP 7-7 LINE, Fuel, 1/4 I.D. x 1/ O.D. x 8-1/ () LINE, Fuel, 1/4 I.D. x 1/ O.D. x LINE, Fuel, 1/4 I.D. x 1/ O.D. x 3-1/ VALVE, Fuel 1-43 FILTER, In-Line -00 CLAMP, Fuel Hose () RECTIFIER/REGULATOR, Kawasaki 8-71 CAPACITOR, Kawasaki Engine -7 PIGTAIL BRACKET, Capacitor ENGINE, Kawasaki 1. HP (Mod. No. FB40V-E3) (shown) ENGINE, Kawasaki HP (Mod. No. FC40V-HS0) ENGINE, Kohler 1 HP (Mod. CV1T, Spec. No. PS-417) MACHINE BUSHING, Ga PULLEY, Engine CLUTCH, Electric SCREW, M8 X 1. X mm Class 8 Hex Cap (4) (Kawasaki Models) SCREW, /1-18 x 1-1/ Hex Cap, Grade (4) (Kohler Models) SCREW, M10 X 1. X.mm Hex Head Cap (Kawasaki Models) SCREW, 7/1-0 x 3 Hex Head Cap, Gr. (Kohler Models) WASHER, 1/3" Flat WASHER, 7/1" Split Lock WASHER, /1" Split Lock (4) BOLT, /1-18 x 1" Short Neck Carriage, Grade () 0-18 NUT, /1-18 Nyloc () 1-18 SCREW, 1/4-0 X 1-1/4" Hex Cap () -103 NUT, 1/4-0 Nyloc () KEY, 1/4 Square x ASSEMBLY, Oil Valve -813 WIRE, Kohler Engine Ground SPACER, Engine Crankshaft BUMPER, Door (Not Shown) (1HP Kohler Only) PRO GEAR EXPRESS MANUAL No. 07 7

8 TRANSMISSION DRIVE GROUP IMPORTANT! LONG SIDE OF HUB FACES DOWN SHORT SIDE UP AS SHOWN MANUAL No. 07 PRO GEAR EXPRESS 8

9 TRANSMISSION DRIVE GROUP E-RING, Retaining 3/4" () 1-03 WASHER, 4/4" I.D. Flat (4) PULLEY,." Transmission Output () BELT, Traction Drive () ( Rib HA Banded Cog Belt; Polyester Cord; Neoprene Compound; Effective Length: BRACKET, Torque 4-18 TRANSMISSION, Peerless Pro Ex 7-8 SWITCH, Transmission (NO) LEVER, Shift -074 WASHER, 1/4" Belleville () BOLT, 1/4-8 x /8" Hex Head, Grade PULLEY, Transmission Input KEY, # Woodruff RING, External Retaining (TRU100-) -118 V-BELT, HA, Wrapped, Effective Length: 41.0 (Hydro Drive) SUPPORT, Transmission () 1-13 SCREW, /1-18 x /8" Hex Washer Self-tapping Swage BOLT, /1-18 x 1" Square Neck Carriage, Grade NUT, /1-8 Hex Nyloc () BOLT, /1-18 x 4-1/" Hex Head, Grade (4) SPACER, Transmission (4) KEY, 3/1 Square x 1" LG. () - WASHER, Fiber RETAINER, /1 Bolt (4) PRO GEAR EXPRESS MANUAL No. 07

10 REAR DECK, DRIVE IDLER, BRAKE & IDLER PULLEY ASSEMBLIES 31 B MOUNT TO TANK BRACKET 31A 31 B 3A, 3B A TO TANK BRACKET 3C 4A, 4B C SEE NEXT PAGE FOR IDLER ASSEMBLY BREAKDOWN FOR BRAKE ASSEMBLY BREAKDOWN SEE PAGE 3 (R.H.) 1 (L.H.) 1-44 TRACTION IDLER ASSEMBLY 34 MANUAL No PRO GEAR EXPRESS

11 REAR DECK, DRIVE IDLER, BRAKE & IDLER PULLEY ASSEMBLIES A 38 3B C LEFT IDLER ASSEMBLIES 4A B C RIGHT IDLER ASSEMBLIES NUT, 3/8-4 Hex Nyloc (4) STUD, Shoulder 3/8-4 Thread w/snap-ring Groove (4) 3A -43 IDLER ASSEMBLY (Upper Left) (all except SPEL10KH) 3B -83 IDLER ASSEMBLY (Upper Left) (SPEL10KH only) 3C -43 IDLER ASSEMBLY (Lower Left) (all models) 4A -437 IDLER ASSEMBLY (Upper Right) (all except SPEL10KH) 4B -83 IDLER ASSEMBLY (Upper Right) (SPEL10KH only) 4C -43 IDLER ASSEMBLY (Lower Right) (all models) -1 NUT, 3/8-1 Nyloc (4) RETAINER, /8 Bolt () SPRING, Extension () FRAME, Engine (Weldment) -140 BOLT, 3/8-1 X 1" Short Neck Carriage, Grade () BRACKET, Anti-Spin NUT, /1-18 Nyloc (4) BRAKE ASSEMBLY (R. Hand) SPRING, Extension -44 ASSEMBLY, Idler Arm BOLT, 1/-13 X 1-1/4" Flange Lock () WASHER, /1" Flat () BOLT, 3/8-1 x -7/1 Shoulder SCRAPER () BUSHING, Axle () ASSEMBLY, Wheel/Drum () E-RING, 1" () -130 SCREW, 3/8-1 X " Hex Head Cap, Grade () BOLT, /1-18 X 1" Short Neck Carriage, Grade (4) BUSHING, /8 Machine (10) -130 NUT, 3/8-1 Hex, Gr. or B (4) -43 BRAKE ASSEMBLY (L. Hand) WELDMENT, Brake Pivot () DECAL, Caution RETAINING RING, /8, External (4) STUD, Fender (3/8-1 Threads Both Ends) (4) 31A 4- COVER, Belt () 31B COVER, Belt () (Model SPEL10KH Only) 3-13 WASHER, 1/" Split Lock () WING-NUT, 3/8-1 Nyloc (4) NUT, 3/8-1 Hex Center Lock, Grade or B () NUT, 1/-13 Nyloc () 3-00 BOLT, 3/8-1 x Short Neck Carriage, Grade WELDMENT, Idler Arm Express FITTING, 3/1" PR Lube (7) BEARING, /1" Flange () IDLER, V-Belt, 3." O.D WASHER, 3/8" Split Lock (4) 4-01 WASHER, 3/8" Flat (4) PULLEY, 3-1/4" Idler (4) SCREW, 3/8-1 X -1/4" Hex Head Cap, Grade (4) WELDMENT, Idler Arm 4-87 WELDMENT, Idler Arm (SPEL10KH only) WELDMENT, Idler Arm WELDMENT, Idler Arm (SPEL10KH only) NUT, 3/8-1 Hex, Gr. or B (4) PRO GEAR EXPRESS MANUAL No

12 PISTOL GRIP HANDLE & CONTROL ASSEMBLIES (all models except SPEL10KH) 4 44B A 44A A 1 3 8B B B A MANUAL No. 07 PRO GEAR EXPRESS 1

13 PISTOL GRIP HANDLE & CONTROL ASSEMBLIES (all models except SPEL10KH) PIN, Clevis () ROD, Brake, Express () ROD, Traction, Express () LEVER WELDMENT, Drive Express () 3-41 PIN, /1" Self-locking Cotter () -130 PIN, 3/1" x 1-3/4" Clevis () SCREW, #10-4 x 1/" Hex Washer Self-tapping () 8A SPRING, Torsion (Left Hand) 8B 4-3 SPRING, Torsion (Right Hand) 4-3 LATCH () BRACKET, Shift Handle GRIP, Latch () 1A 4-18 TRACTION LINK WELDMENT (Left Hand) 1B 4-17 TRACTION LINK WELDMENT (Right Hand) SWIVEL () -14 COTTER PIN, 1/" Self-locking (8) SWIVEL SPRING, Compression (3) WASHER, 3/8" Flat () 18-1 NUT, 3/8" Hex Nyloc () GRIP () HANDLE, Weldment SWITCH, OPC NC () A 4-18 TRACTION LINK WELDMENT, Lower (Right Hand) B 4-17 TRACTION LINK WELDMENT, Lower (Left Hand) SWIVEL () NUT, 1/-7 Hex (Special) -71 SWITCH, PTO 1-8 NUT, /8-3 Hex (Special) WASHER, /8" Internal Tooth Lock SWITCH, On/Off 3- WASHER, Nylon LEVER, Shift GRIP, Shift Lever GRIP, 3/4" I.D. () 33-7 SCREW, 3/8-1 x 1-1/" Hex Head Cap, Grade ROD, Shift WIRING HARNESS (See Page 3) BOLT, 3/8-1 x 1" Short Neck Carriage, Grade () CONTROL, Throttle (Kawasaki & Kohler Engines) SCREW, 1/4-0 x 3" Hex Head Cap, Grade () 3-00 WASHER, 1/4" Flat () 40-1 SPACER, Brake (Outer ) () PIN, /1 X 1-1/8" Roll () 4-41 SPACER, Brake (Inner) () NUT, 1/4-0 Hex Nyloc () 44A 4-10 GRIP, Pistol OPC (Right Hand) (Weldment) 44B 4-1 GRIP, Pistol OPC (Left Hand) (Weldment) PRO GEAR EXPRESS MANUAL No

14 LOOP HANDLE & CONTROL ASSEMBLIES (model SPEL10KH only) MANUAL No. 07 PRO GEAR EXPRESS

15 LOOP HANDLE & CONTROL ASSEMBLIES (model SPEL10KH only) LOOP HANDLE, Express (Weldment) -7 SWITCH, OPC (NC) SCREW, #1- x 1/ Hex Flange Self-tap () 4-1 ROD, Pivot BUSHING, 1/ Machine () E-RING, 1/ () LEVER, Traction (Right Hand) (Weldment) LEVER, Traction (Left Hand) (Weldment) PLATE, Neutral Latch () SPACER, Neutral Latch () PIN, Shoulder () 1-11 LATCH, Neutral (Weldment) CABLE TIE, 7 (4) (not shown) GRIP, Vinyl BEARING (4) BAIL, Operator Presence Control (Weldment) 17-1 BOLT, 1/4-0 x 1-3/4 Hex Head Cap, Grade () ROD, OPC 1-13 SPRING, OPC PANEL, Console (Left) 1-11 SCREW, 1/4-0 x 1/ Hex Washer Self- tap () -18 SCREW, 1/4-0 x 3/4 Hex Washer Self- tap () 3-71 SWITCH, Toggle NUT, 1/-7 (Special) -100 CONTROL, Engine Control ( Kohler ) (not shown) 7-8 FITTING, Grease (1/4-8 Thread) () NUT, 1/4-0 Hex Jam () 8-70 SCREW, 3/8-1 x 3-1/4 Hex Head Cap, Grade -1 NUT, 3/8-1 Hex Nyloc (10) continued on following two pages PRO GEAR EXPRESS MANUAL No. 07 1

16 LOOP HANDLE & CONTROL ASSEMBLIES (model SPEL10KH only) (continued) MANUAL No PRO GEAR EXPRESS 1

17 LOOP HANDLE & CONTROL ASSEMBLIES (model SPEL10KH only) (continued) PANEL, Console (Right) SWITCH, ON-OFF WASHER, /8 Internal Tooth Lock NUT, /8-3 Hex (Special) KEY, Ignition (pair) BRACKET, Shift Handle BOLT, 3/8-1 x 1 Square Neck Carriage, Grade () 37-7 SCREW, 3/8-1 x 1-1/ Hex Head Cap, Grade SPACER, Wear SHIFT LEVER SPRING, Friction Pack (3) WASHER, 3/8 Flat () 4-40 GRIP, Flat Bar ROD, Shift (1-1/ Long, 3/8-1 Thread) COTTER-PIN, 1/ Self-Locking (10) SWIVEL, Brake Link, 3/8-1 Thread,.10 Dia. Hole (PM) 4-1 WASHER, /1 Flat () PIN, /1 x.4 Clevis () ROD, Traction ( Long, 3/8-1 Thread) () SWIVEL, 3/8-1 Thread,.10 Dia. Hole () 0-8 TRACTION LINK, Lower Left (Weldment) TRACTION LINK, Lower Right (Weldment) -831 TRACTION LINK, Upper Right (Weldment) 3-83 TRACTION LINK, Upper Left (Weldment) WIRING HARNESS (see page 34) -48 SWIVEL.40 &.10 Dia. Holes () ROD, Brake (37-3/4 Long, 3/8-1 Thread) () COTTER PIN, /1 Self Locking () PRO GEAR EXPRESS MANUAL No

18 DECALS DECAL, Console (Pistol Grip) 4-80 DECAL, SNAPPER Pro w/trademark DECAL, Pro Express DECALS (Continued On Next Page) MANUAL No. 07 PRO GEAR EXPRESS 18

19 DECALS DECAL, Patent Numbers -41 DECAL, Caution - DECAL, Warning DECAL, Caution (Open Drive Belt) DECAL, Snapper 4-47 DECAL, 3 Deck DECAL, 48 Deck 10 DECALS (Continued On Next Page) PRO GEAR EXPRESS MANUAL No. 07 1

20 DECALS DECAL, Operation (Gear Drive) 1-80 DECAL, Caution, Counterweight (3 ) DECAL, Caution, Counterweight (48 ) DECAL, Warning (Cut Finger) DECALS (Continued On Next Page) MANUAL No. 07 PRO GEAR EXPRESS 0

21 DECALS DECAL, Throttle Control 7-37 DECAL, Ignition Switch DECAL, PTO Switch DECAL, Right Hand Control 7-30 DECAL, Shift NOTE: The decals on this page are used on the Loop Handle model only. PRO GEAR EXPRESS MANUAL No. 07 1

22 TRACTION, REAR WHEEL ASSEMBLY ASSEMBLY, Tire & Hub (Includes Items thru ) () -438 HUB, Weldment () BEARING, Wheel (4) VALVE, Air (Snap-In) () 7-8 FITTING, 1/4-8 Straight Lube () 4-4 TIRE, 1 x.0-8 Tubeless () 7-0 BOLT, /1-18 x 1-1/" Hex Flange Lock, Grade (8) PULLEY, 8" (4) -31 DRUM, Brake " () SPACER (8) MANUAL No. 07 PRO GEAR EXPRESS

23 BRAKE ASSEMBLY 1B 3 1A A LEVER, Brake (Right Hand) (Weldment) 1B LEVER, Brake (Left Hand) (Weldment) -833 STUD, Brake Mount (Weldment) () LINK, Brake (Weldment) () NUT, 3/8-1 Hex, Grade or B () BAND, Brake " () -130 SCREW, 3/8-1 X " Hex Head Cap, Grade () BUSHING, /8" I.D. X 1" O.D. Machinery () RETAINER, 3/8" Bolt (4) 3-03 PLATE, Brake Link () RETAINER, /8" () FITTING, 3/1 Lube () 1-1 NUT, 3/8-1 Nyloc () PRO GEAR EXPRESS MANUAL No. 07 3

24 3 DECK IDLER ASSEMBLY PULLEY, Idler (.00 O.D.) -1 NUT, 3/8-1 Hex Nyloc (4) WASHER, 7/1" I.D. X 1" O.D RING, 1" External Retaining -3 BUSHING () IDLER ARM (Weldment) (3") FITTING, 1/4-8 Straight Lube BOLT, 3/8-1 x 1" Hex Head Cap, Grade (3) 4-1 PIVOT, Idler Arm (Weldment) SCREW, 3/8-1 x 3-1/4" Hex Head Cap, Grade SPACER () BRACKET, Idler (Pro 3) BOLT, 3/8-1 x 1" Hex Flange Lock, Grade -18 NUT, 3/8-1 Hex Center Lock, Grade or B 1 3- RETAINER, Belt - Idler MANUAL No PRO GEAR EXPRESS

25 48 DECK IDLER ASSEMBLY PULLEY. Idler 3-44 PULLEY, Flat Idler O.D NUT, 3/8-1 Hex Center Lock, Grade or B () RING, 1 External Retaining () -3 BUSHING (4) 4-4 WELDMENT, Idler Arm, Secondary WELDMENT, Idler Arm, Primary SPACER, Idler Pulley WASHER, 3/8 Flat () SCREW, 3/8-1 x Hex Head Cap, Grade BOLT, 3/8-1 x 3-1/4 Hex Head Cap, Grade FITTING, 1/4-8 Straight Lube WELDMENT, Idler Pivot 3- RETAINER, Belt PRO GEAR EXPRESS MANUAL No. 07

26 CUTTER HOUSING ASSEMBLY SPINDLE ASSEMBLY- INCLUDES ITEMS 1,3,4,,10,11 & MANUAL No. 07 PRO GEAR EXPRESS

27 CUTTER HOUSING ASSEMBLY 1-4 BEARING, Sealed () -70 WASHER, Spindle 3-74 SNAP-RING, Spindle Shaft SHAFT, Spindle -4 SPACER, Bearing -71 SPACER, Blade (4) 7-4 BLADE, 18" (3" Deck) () BLADE, 1-1/ (48 Deck) (3) WASHER, Beveled - BOLT, /8-18 X 7-1/" Hex Head Cap, Grade 10-7 FITTING, 1/4- Straight Lube 11 - HOUSING, Cutter VENT, Spindle BOLT, 3/8-1 X 1-1/4" Rib Necked () -4 PULLEY, -3/4" O.D. (3" Deck) NUT, /8-18 Hex Flange Lock, Grade 1-1 NUT, 3/8-1 Hex Nyloc () Note: Part Number (Spindle Housing Sub-Assembly) is comprised of Items 11 & 1 (one each) as well as Item 13 ( each). PRO GEAR EXPRESS MANUAL No. 07 7

28 3" MOWER DECK ASSEMBLY DECK IDLER ASSEMBLY BREAKDOWN SHOWN ON PAGE CUTTER HOUSING ASSEMBLY BREAKDOWN SHOWN ON PAGES & DECK CASTER ASSEMBLY BREAKDOWN SHOWN ON PAGE 3 MANUAL No PRO GEAR EXPRESS

29 3" MOWER DECK ASSEMBLY SNAP-RING, 1" External DECAL, Warning (CPSC Cut Finger) 3 - DECAL, Warning KNOB, Hood (/1-18 Thread) (3) -41 DECAL, Caution - Operator Instruction -70 SPRING, Chute V-BELT, Deck Drive 3" (Nominal Effective Length: ) 8-77 HINGE PIN, Chute -78 SPRING, Idler SCREW, /1-18 X 4-1/" Hex Head Cap, Grade (3) PIN, 3/3" X 1" Cotter DECAL, SNAPPER PRO w/trademark DEFLECTOR, 3" (Weldment) 3-43 COVER, 3" PIVOT, Idler (Weldment) ASSEMBLY, Idler Arm 3" ASSEMBLY, Caster Red () WELDMENT, 3" Deck, Fixed Height, Express FITTING, Lube 1/4-8 Straight () 0-1 NUT, 3/8-1 Hex Nyloc () SCREW, 3/8-1 x 1" Hex Head Cap, Grade (3) -130 SCREW, 3/8-1 x " Hex Head Cap, Grade RETAINER, 3/8 Bolt BOLT, 1/-13 x 1-1/4" Flange Lock, Grade -18 WASHER, 3/8" I.D. Flat () -118 SPACER () NUT, /1-18 Hex Flange Lock, Grade (3) NUT, 3/8-1 Hex Flange Lock () -13 WASHER, 1/" Split Lock NUT, 1/-13 Hex, Grade WASHER, 13/3" () DECAL, Deck Size PAD 34-7 BOLT, 3/8-1 X 3/4" Short Neck Carriage, Grade () BUSHING, Caster (4) PRO GEAR EXPRESS MANUAL No. 07

30 48" MOWER DECK ASSEMBLY DECK IDLER ASSEMBLY BREAKDOWN SHOWN ON PAGE MANUAL No. 07 PRO GEAR EXPRESS 30

31 48" MOWER DECK ASSEMBLY DECAL, Warning (CPSC Cut Finger) - DECAL, Warning KNOB, /1-18 (4) 4-41 DECAL, Caution- Operator Instruction -737 PIVOT, Roller Pin (Weldment) WASHER, /8 Flat () 7-70 SPRING, Chute 8-4 PULLEY, Driven -3/4 O.D -1 V-BELT, Secondary 48 (113 Long) 10 - V-BELT, Primary 48 ( Long) SPRING, Primary 1-77 PIN, Chute Hinge SPRING, Idler -81 STANDOFF, 4-1/ Long (/1-18 thread top; 3/8-1 thread bottom) (4) PIN, 3/3 x 1 Cotter DECAL, Snapper Pro w/trademark DEFLECTOR, 48" Chute (Weldment) COVER ASSEMBLY, Caster Red (Fixed Decks) () (not shown; see page 3) WELDMENT, Deck 48 (Fixed Height) (includes 4 of item 7) ASSEMBLY, Idler- 3 Spindle Deck 7-8 FITTING, Lube 1/4-8 Straight () 3 7- ROLLER, Low Density Polyethylene (3) 4-1 NUT, 3/8-1 Hex Nyloc (8) SCREW, 3/8-1 x 1, Hex Head Cap, Grade (4) -130 SCREW, 3/8-1 x, Hex Head Cap, Grade () 7 4- BUSHING, Caster 8-11 NUT, 3/8-1 Hex Flange Lock (4) PRO GEAR EXPRESS MANUAL No

32 ELECTRICAL COMPONENTS (Pistol Grip Handle) UNDERSIDE VIEW OF BLADE CLUTCH OPC SWITCH (NC) (PISTOL GRIP MODELS ONLY) KEY P/N YELLOW GREEN BLADE CLUTCH SWITCH P/N -71 WHITE RED BLUE KEYSWITCH P/N YELLOW RED GREEN BLUE YELLOW 1 AMP FUSE BLACK RED CONNECTOR NOTCH BLACK GREEN OPC SWITCH (NC) (PISTOL GRIP MODELS) P/N 1-70 KAWASAKI ENGINE ONLY WHITE GREEN FUSE SOCKET TO TRANSMISSION SWITCH RED MAIN WIRE HARNESS P/N 4-1 KAWASAKI REGULATOR/RECTIFIER P/N -883 YELLOW ORANGE BLACK BLACK RED ORANGE YELLOW BLACK & WHITE BLACK & WHITE YELLOW KAWASAKI PIGTAIL P/N -7 RED GREEN BLACK BROW TO ELECTRIC CLUTCH BLUE BLACK BLACK KAWASAKI CAPACITOR P/N -71 GREEN BLACK RED TO MAIN HARNESS GROUND TO ENGINE TO ENGINE TERMINAL * NOTE: THIS TERMINAL HAS A LOCK-OUT BARB WHICH MUST SLIDE INTO THE CONNECTOR NOTCH. PRO GEAR EXPRESS MANUAL No. 07 3

33 WIRING SCHEMATIC (Pistol Grip Handle) PRO GEAR EXPRESS MANUAL No

34 ELECTRICAL COMPONENTS (Loop Handle) MAIN WIRE HARNESS P/N PRO GEAR EXPRESS MANUAL No

35 WIRING SCHEMATIC (Loop Handle) PRO GEAR EXPRESS MANUAL No. 07 3

36 Parts Manual for PRO GEAR EXPRESS MID-SIZE WALK BEHIND MOWERS SERIES 0 & 1 POWER UNIT MODEL SPE10KW SPE0KW SPE10KH SPE11KW SPEL10KH MOWER UNIT MODEL SPE30 SPE480 SPE31 SPE481 IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY. COPYRIGHT 00 SNAPPER INC. ALL RIGHTS RESERVED MANUAL No. 07 (Rev. 4, 0/30/0) Printed in U.S.A. 3

Parts Manual for PRO GEAR EXPRESS MID-SIZE WALK BEHIND MOWERS SERIES 0 & 1 POWER UNIT MODELS MOWER MODELS SPE140KW SPE151KW SPEL150KH

Parts Manual for PRO GEAR EXPRESS MID-SIZE WALK BEHIND MOWERS SERIES 0 & 1 POWER UNIT MODELS MOWER MODELS SPE140KW SPE151KW SPEL150KH Parts Manual for MID-SIZE WALK BEHIND MOWERS SERIES 0 & 1 POWER UNIT MODELS SPE1250KW SPE131KW SPE140KW SPE150KH SPE151KW SPEL150KH MOWER MODELS SPE360 SPE361 SPE481 McDonough, GA, 30253 U.S.A. COPYRIGHT