REAR ENGINE RIDER SERIES 16 & 18

Transcription

1 Parts Manual for REAR ENGINE RIDER SERIES 16 & 18 MODELS 20816B N20816B 20816BE N20816BE BE 2818BE N281016BE BE BE 3018BE 3316BVE 3318BVE 3316KVE 33118KVE IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY. COPYRIGHT 1 SNAPPER INC. ALL RIGHTS RESERVED (Rev., 08/21/02) MANUAL No. 0608

2 CONTENTS DESCRIPTION PAGE WHEELS, FRONT... 3 WHEELS, REAR... & FRONT END, STEERING...6 & MAIN CASE (Solid Seat Mount)...8 & MAIN CASE (Hinged Seat Mount)...10 & 11 DIFFERENTIAL, R.H. FENDER...12 & CHAIN CASE, L.H. FENDER... & 1 SMOOTH CLUTCH ASSEMBLY...16 & 1 CUTTING DECKS, DEFLECTORS...18 & 1 RAILS, LIFT ARMS, CAM LIFT (Series 16)...20 & 21 RAILS, LIFT ARMS, CAM LIFT (Series 18)...22 & 23 BLADE STOP PEDALS... 2 SPINDLE ASSEMBLY... 2 BELTS, BRAKES, INTERLOCK (2 Models) (Series 16; Early Production) BELTS, BRAKES, INTERLOCK (28,30 & 33 Mods) (Series 16; Early Production)... 2 BELTS, BRAKES, INTERLOCK (2 Models) (Series 16)...28 & 2 BELTS, BRAKES, INTERLOCK (28, 30 & 33 Models) (Series 16)...30 & 31 BELTS, BRAKES, INTERLOCK (28, 30 & 33 Models) (Series 18)...32 & 33 DRIVE DISC ASSEMBLY... 3 FUEL TANK & OPERATOR S SEAT... 3 ENGINES & EXHAUST MUFFLER THROTTLE CONTROL... 3 DECALS thru 1 ELECTRICAL SYSTEMS (For 8 HP Recoil Wiring Diagram)...2 & 3 ELECTRICAL SYSTEMS (For 8, 10, 12 & HP Briggs)... & ELECTRICAL SYSTEMS (For HP Briggs)...6 & ELECTRICAL SYSTEMS (For & 1 HP Kohler)...8 & WIRING SCHEMATICS... 0 thru 3 HARDWARE BAGS... ACCESSORIES AND ATTACHMENTS... MANUAL No R. E. RIDER SERIES 16 & 18

3 WHEELS - FRONT 10 1 ASSEMBLY 6 2, 2A ASSEMBLY, Front Tire & Rim (Complete) (Includes Items 2, 3,, 6, & 12) ASSEMBLY, Front Tire & Rim (Includes Items 2 thru 6) FRONT WHEEL, x.00 (Includes items 2A thru 6) TIRE,.10/3.0 x 2A 2-33 TIRE 11.00/:00 x RIM (For.10/3.0 x Tire) BEARING, Ball VALVE, Air (Snap-in) FITTING Lube 1-03 WASHER, 3/ I.D CAP, Hub SEAL, Felt CAP, Dust PIN, Cotter /32 x 1" (2) TUBE, Inner (For.10/3.0 x Tire) R. E. RIDER SERIES 16 & 18 3 MANUAL No. 0608

4 WHEELS - REAR LEFT HAND 18A ASSEMBLY 2A, 2B, 2C RIGHT HAND A 3A, 3B, 3C MANUAL No R. E. RIDER SERIES 16 & 18

5 WHEELS - REAR ASSEMBLY, Rear Tire & Rim (Includes Items 2A, 3A, ) (2" Models) ASSEMBLY, Rear Tire & Rim (Includes Items 2B, 3B, )(28" & 30" Models) ASSEMBLY, Rear Tire & Rim (Includes Items 2C, 3C, ) (33" Models) 2A TIRE, Std., x 8 (2" Models) 2B 1-68 TIRE, Wide, x 8 (28" & 30" Models) 2C 2-28 TIRE, Extra Wide, x 8 (33" Models) 3A 1- RIM, Std., (For x 8 Tire) (2" Models) 3B RIM, Wide, (For x 8 Tire) (28" & 30" Models) 3C 1- RIM, Extra Wide, (For 16/.0 x 8 Tire) (33" Models) VALVE, Air (Snap-in) CLAMP, Right Hand (8, 10 & HP) CLAMP, Right Hand (12, & 1 HP) BOLT, 1/2-20 x 3/" Lug (6) BOOT, Right Hand (8 & 10 HP) A 1-1 BOOT, Right Hand (12 & HP) SEAL, Oil -033 HUB, Rear Wheel R. H. (Weldment) CAP, Hub CAP, Hub (Left Hand) HUB, Rear Wheel L.H. (Weldment) NUT, /16-2 Hex Center Lock BOLT, /16-2 x 1-/8" Tapered (Left Hand) BOLT, /16-2 x 2" Tapered (Right Hand) SEAL, Oil (Left Hand) CLAMP, (Left Hand) (12 & HP) BOOT, Ball Bearing Models (Left Hand) ( HP Engines) 18A 3-18 BOOT, Standard Models (Left Hand) (8, 10, 12 & HP Engines) R. E. RIDER SERIES 16 & 18 MANUAL No. 0608

6 FRONT END, STEERING A 18 (2 & 28 MODELS) (30 & 33 MODELS) * OR * 3* 1 * 38* *NOTE: These parts are used on the 2 model only. MANUAL No R. E. RIDER SERIES 16 & 18

7 FRONT END, STEERING 2 & 28 Models ASSEMBLY, Steering Wheel (Includes Item 2) DECAL, Snapper PIN, 1/ x 1-1/2" Roll LEVER, Park Brake SPRING KNOB -101 SCREW, #8-32 x 3/8" Cross Recess NUT, #8-32 Hex, Grade 2B -6 ARM, Clutch/Brake (Weldment) SPACER, Main Tube PLUG COVER, Steering Shaft (Foam) COVER, Steering Shaft 1-03 WASHER, 3/ Flat BUSHING, 3/" Steering Shaft COTTER-PIN, 3/16 x 1-1/2" (2) 1-16 FRAME, Front (2 & 28 Models) FRAME, Front (30 & 33 Models) PAD, Foot (Right Side) (2" & 28" Models Shown) PAD, Foot (Right Side) (30 & 33" Models Shown) PAD, Foot (Left Side) (Not Shown, 2" & 28" Models) PAD, Foot (Left Side) (Not Shown, 30" & 33" Models) RING, 3/ Retaining (2) BEARING, Nylon () PIN, Narrow King (Right Side) NUT, /16-2 Hex, Gr. () 23-1 WASHER, /16 Split Lock (6) BUSHING () PIN, Narrow King (Left Side) PIN, Wide King (Right Side), 11.0 Tires PIN, Wide King (Left Side), 11.0 Tires COTTER-PIN, /32 x 1" (2) TIE-ROD (30 & 33 Mdls. (2) PEDAL, Clutch/Brake RING, /8 Ext. Retaining PAD, Clutch/Brake Pedal SPACER, Pivot 3-81 SHAFT, Steering (Narrow Front End) TIE-ROD, Left Side (2" & 28" Models) TIE-ROD, Right Side (2" & 28" Models) STUD, 3/8-2 x /8" SPACER (2) SCREW, /16-18 x 1-1/ Hex Washer Self-Tapping 0-10 CABLE, Brake (Snap-in) 0A 2-23 CABLE, Brake 1 2- CABLE, Clutch CONNECTOR, Cable 3 - SCREW, 1/-20 x 3/" Hex Head Cap, Grade 2-8 SPACER,.3 x.62 x.1 Sintered Iron -032 NUT, 1/-20 Hex Center Lock 6-13 SHAFT, Steering (Wide Front End) HAIRPIN, 1/8 x 2-/ WASHER, 3/8 Flat -118 SCREW, 3/8-16 x /8 Hex Washer Self-Tap 0-01 WASHER, 3/8 Flat 1-08 NUT, 3/8-2 Hex Nyloc () R. E. RIDER SERIES 16 & 18 MANUAL No. 0608

8 MAIN CASE (Solid Seat Mount) MANUAL No R. E. RIDER SERIES 16 & 18

9 MAIN CASE (Solid Seat Mount) CASE, Main (Standard) BUMPER, Rear 3 -- FENDER, Left Hand (See Page For Related Parts) 2-80 COVER, Battery SWIVEL (2) COVER, Switch 3-2 WING, Rear (Models 28, 30 & 33 Only!) (2) 8-08 NUT, /16-18 Hex Flange Lock, Grade (2) -03 SCREW, /16-18 x 3/ Hex Washer Self-Tap () LINK, Shift (Long) 11-8 ARM, Shift CROSS BRACE LINK, Shift (Short) -016 NUT, /16-18 Hex (2) 1-08 ARM, Shift Handle SPRING, Shift Handle DETENT, Shift 18-0 HANDLE, Shift NUT, /16-2 Hex Flange Lock KNOB, Shift Handle CABLE, Deck Support (. ) (2 Models Only!) BUSHING, Pilot WASHER, /16 Internal Tooth Lock COTTER-PIN, 3/32 x 3/" PIN, 1/ x 1-3/" Tapered Clevis BUSHING, Nylon WASHER, Thrust (2) BUSHING, Nylon (2) SCREW, /16-18 x /8" Hex Washer Self-Tap () CLIP, Wire (2) BRACKET, Switch SCREW, #10-32 x 1/ Hex Washer Self-Tap (slotted) FASTENER, 1/ x 3/ Ratchet (6) SCREW, /16-18 x 1-1/2" Hex Washer Self-Tap () 3-1 SCREW, /16-2 x 1-3/" Hex Head Cap, Grade () RETAINER, /16 Bolt () WASHER, /16" Flat () 38-1 WASHER, /16" Split Lock (8) 3-12 NUT, /16-2 Hex, Grade (8) DRAIN, Oil (Short) (8, 10, & HP Briggs) GUIDE, Belt (2" Models) GUIDE, Belt (28 Models) GUIDE, Belt (30" & 33" Briggs) ASSEMBLY, Oil Valve (12 HP Briggs & HP Kohler) HAIRPIN, 3/32 x 1-1/2 (2) SCREW, /16-18 x 3/ Hex Head Cap, Grade 2 (2) R. E. RIDER SERIES 16 & 18 MANUAL No. 0608

10 MAIN CASE (Hinged Seat Mount) MANUAL No R. E. RIDER SERIES 16 &

11 MAIN CASE (Hinged Seat Mount) CASE, Main (12, & HP Briggs) CASE, Main ( & 1 HP Kohler) BUMPER, Rear 3 -- FENDER, Left Hand (See Page For Related Parts) 2-80 COVER, Battery 1-06 NUT, /16-2 Hex Flange Lock COVER, Switch 3-2 WING, Rear (Models 28, 30 & 33 Only!) (2) 8-08 NUT, /16-18 Hex Flange Lock, Grade (2) -03 SCREW, /16-18 x 3/ Hex Washer Self-Tap () LINK, Shift (Long) 11-8 ARM, Shift (Weldment) CROSS BRACE LINK, Shift (Short) -016 NUT, /16-18 Hex (2) 1-08 ARM, Shift Handle (Weldment) SPRING, Shift Handle DETENT, Shift (Weldment) 18-0 HANDLE, Shift (Weldment) SWITCH, Seat KNOB, Shift Handle BRACKET, Switch BUSHING, Pilot WASHER, /16 Internal Tooth Lock COTTER-PIN, 3/32 x 3/" PIN, 1/ x 1-3/" Tapered Clevis BUSHING, Nylon WASHER, Thrust (2) BUSHING, Nylon (2) SCREW, /16-18 x /8" Hex Washer Self-Tap () CLIP, Wire (2) DRAIN, Oil (1/ Turn) (12 HP Briggs & & 1 HP Kohler) BOLT, M8-1.2 x 2mm Hex Head Self-Tap FASTENER, 1/ x 3/ Ratchet (6) SCREW, /16-18 x 1-1/2" Hex Washer Self-Tap () 3-1 SCREW, /16-2 x 1-3/" Hex Head Cap, Grade () RETAINER, /16 Bolt () WASHER, /16 Flat () 38-1 WASHER, /16" Split Lock (8) 3-12 NUT, /16-2 Hex, Grade (8) SCREW, #10-32 x 1/ Hex Washer Self-Tap (2) GUIDE, Belt (12, & Briggs) GUIDE, Belt ( & 1 HP Kohler) GUIDE, Belt ( HP 28 Deck) SCREW, /16-2 x 1 Hex Head Cap, Grade () PLATE, Engine* SWIVEL (2) *NOTE: ITEM 3 IS USED ON HP 3-66 PLATE, Seat KOHLER ENGINES ONLY! PIN, Hinge COTTER-PIN, 1/16 x 3/ CUSHION -380 SPRING, Seat (Operator Presence Control) 0-0 SCREW, 1/-20 x /8 Self-Tapping, Truss Head, Torx 1-12 WASHER, 1/ I.D. Flat (2) DRAIN, Oil (Short) (8, 10, & HP Briggs) HAIRPIN, 3/32 x 1-1/2 (2) SCREW, /16-18 x 3/ Hex Head Cap, Grade 2 (2) R. E. RIDER SERIES 16 & MANUAL No. 0608

12 DIFFERENTIAL, R. H. FENDER A MANUAL No R. E. RIDER SERIES 16 & 18

13 DIFFERENTIAL, R. H. FENDER COLLAR, Lock (Includes P.N , /16-18 x /16 Setscrew) BALL BEARING, Axle (Right Hand Fender) (10, 12, & HP Models) 2A BEARING, Axle (Right Hand Fender) (8 & 10 HP Models) NUT, /16-2 Hex Flange Lock 3-10 WASHER, Thrust PLATE, Differential SPACER, Pinion () GEARS, Differential Pinion () WASHER, Thrust -18 ASSEMBLY, Drive Hex Tube WASHER, Hex Nylon Splash (3) GEAR, 11 Teeth-10 Pitch CHAIN, 6 Pitch (No. 3) SPROCKET 1-06 RING, External Retaining SPACER CLAMP, Boot (2) BOOT, Oil Seal PLUG, Oil Fill & Check CASE, Transmission GASKET, Transmission Case FENDER, Right Hand (33 Ball Bearing Differential Models) (2.8 hole) FENDER, Right Hand (2 & 28 Bushing Differential Models) (1.62 hole) GEAR, 63 Teeth-10 Pitch AXLE, Long (Includes Gear) (Use Only With Short Axle P.N. -38) SPACER 2-38 AXLE, Short (Includes Gear) (Use Only With Long Axle P.N. -63) SCREW, /16-2 x 1-/8" Hex Cap Special Lock () O-RING, /16 (2) WASHER, /16 Belleville (2) 2-03 WASHER, /16 External Tooth Lock WASHER, /16 Flat BOLT, /16-2 x 2-/8" Idler SCREW, /16-18 x /8" Hex Washer Self-Tap (11) SCREW, 1/-20 x /8" Hex Washer Self-Tap () SPACER, Short Axle GREASE, Transmission (2 oz. Required) KIT, Differential (Includes 2A & Fender) KIT, Differential (Includes items 2 & 3- Fender) R. E. RIDER SERIES 16 & 18 MANUAL No. 0608

14 CHAIN CASE, L. H. FENDER ASSEMBLY MANUAL No R. E. RIDER SERIES 16 & 18

15 CHAIN CASE, L. H. FENDER ASSEMBLY, Chain Case (Includes items 2 thru, 1, 16, & 31 thru 3) 2-16 CASE, Sprocket GASKET, Case Cover WASHER,.60 I.D. Belleville (2) 1-06 BEARING, Ball (2) SPROCKET & SHAFT 1-06 KEY, 1/8 x /8" Woodruff COVER, Chain Case 1-02 BEARING, Needle (2) WASHER, Nylon Thrust (2) HUB & SPROCKET CHAIN -030 SCREW, #10-2 x /8" Hex Washer Self-Tap (10) PLUG, Oil Fill & Check ROLLER RING, 1/2 Heavy Duty External Retaining FENDER, Left Hand (2 & 28 Models) (1.628 I.D. hole) FENDER, Left Hand (33 Models) (1. I.D. hole) COLLAR, Lock (Includes #-06 Setscrew 1/-20 x 1/") (Used with ball bearing, item 32, only) BEARING, Left Hand Fender (Includes Item 20) (8, 10, & 12 HP Models) FITTING, Lube ROD, Cross-Tie CLAMP, Boot (2) BOOT, Oil Seal WASHER, Thrust Nylon WASHER, Thrust NUT, /8-18 Hex Nyloc () NUT, /16-2 Hex Flange Lock O-RING (2) SPACER WASHER, Shim (As Required) WASHER, Shim (6) BALL BEARING, Left Hand Fender (33 Models) ASSEMBLY, Left Hand Fender (Includes P.N. 3-8 Fender & P.N Bearing) (12, & 1 HP Models) GREASE, Transmission (Use 2 oz. maximum) NOTE: SEE PAGES 16 & 1 FOR ILLUSTRATION OF BRAKE LEVER ASSEMBLY AND RELATED PARTS. R. E. RIDER SERIES 16 & 18 1 MANUAL No. 0608

16 SMOOTH CLUTCH ASSEMBLY CLUTCH CABLE ATTACHMENT HOLE ASSEMBLY SILHOUETTE OF BRAKE CABLE See Page 6 MANUAL No R. E. RIDER SERIES 16 & 18

17 SMOOTH CLUTCH ASSEMBLY 1-31 ASSEMBLY, Smooth Clutch (Includes Items 2 thru 6) 2-23 HUB, Driven Disc DISC, Driven 1-23 WASHER, Thrust PLATE, Drive Disc 6-08 NUT, /16-18 Hex Flange Lock () -2 ASSEMBLY, Brake Lever (Includes Brake Lining & Rivet) RING, 3/8 External Retaining NUT, 1/-28 Hex Top Lock WASHER, 1/ Flat (3) SPACER SCREW, 1/-28 x 1" Hex Head Cap, Grade (Washer Face) SPRING, Brake Return SPRING, Clutch Brake LIFT, Yoke BEARING, Yoke (2) NUT, /16-2 Hex Center Lock (2) SCREW, /16-2 x 1" Hex Head Cap, Grade (2) SCREW, 3/8-16 x /8" Hex Washer Self-Tap COLLAR, Yoke WASHER, /16 Flat (2) ARM, Yoke SCREW, 1/-20 x 3/8" Hex Washer Self-Tap (2) R. E. RIDER SERIES 16 & 18 1 MANUAL No. 0608

18 CUTTING DECKS, DEFLECTORS 1, 1A (see page 1) RAILS & LIFT ARMS ASSEMBLY (See Pages 20 Thru 23) SILHOUETTE OF BLADE ENGAGE- MENT ASS Y. (For Parts Breakdown see Pages 26-33) (30 Deck) SILHOUETTE OF SPINDLE ASS Y. (See Page 2 For Parts Breakdown) 1 8, 1 3 SILHOUETTE OF BLADES, ITEM NOTE: Blade part number appears On blade. NOTE: The 2, 28 and 33 decks are round. The 2 deck has no square rib on top. MANUAL No R. E. RIDER SERIES 16 & 18

19 1 Note backward L shaped slot. 1A CUTTING DECKS, DEFLECTORS Note straight slot. NOTE: The two types of spindle covers are not inter-changable COVER, Spindle 1A 3-80 COVER, Spindle DECK, 2 (Painted w/decals) DECK, 28 (Painted w/decals) DECK, 30 (Painted w/decals) DECK, 33 (Painted w/decals) KIT, Air Lift (2, 28 & 33 Deck) (incl. items thru ) KIT, Air Lift (30 Deck) (incl. items thru ) 3-23 AIR-LIFT (2) (2, 33 Deck) AIR-LIFT (2) (30 Deck) SCREW, /16-2 x 11/16 Machine (6) WASHER, /16 Internal Tooth Lock (6) NUT, /16-2 Hex (6) 8-2 DEFLECTOR, 28 /33 Discharge (incl. item ) DECAL, Danger HINGE, Deflector (16 long) HINGE, Deflector (8 long) SPRING, Hinge (use with Pin) SPRING, Hinge (use with Pin) PIN, Hinge ( L-shaped) (16-1/ long) PIN, Hinge (straight) (8-/8 long) -100 NUT, /16-18 Hex Flange Lock NUT, 1/ Push (2) 1-16 DEFLECTOR, Discharge (2 Deck) (incl. item ) ASS Y, Discharge (2 Deck) (incl. items thru 12, & 1) DEFLECTOR, 30 Discharge WASHER, /16 Flat (2) SCREW, 1/2-20 x 1 Hex Head Cap, Grade (2) 1-00 WASHER, 1/2 Internal Tooth Lock (2) 20-0 Nut, 1/2-20 Hex Jam (2) BOLT, /16-18 x 3/ Short Neck Carriage, Grade (2) SCREW, 1/-20 x /8 Hex Washer Self-Tap () BOLT, /16-18 x 1/2 Hex Washer Self-Tap Gr. (3) 2-12 BOLT, /16-18 x 1/2 Hex Flange Lock (2) 2-06 NUT, 3/18-16 Hex Flange Lock () BRACKET, Gage Wheel (Front) (28 & 33 Decks) SCREW, 3/8-2 x 3-3/ Hex Head Cap, Grade (3) WHEEL, Gage (3) SPACER (3) NUT, 3/8-2 Hex Nyloc (3) BRACKET, Gage Wheel (Rear) (2) (28 & 33 Decks) BOLT, /16-18 x 1/2 Carriage (6) for 28 & 33, (8) for 30 Deck NUT, /16-18 Hex Flange Lock (8) for 28 & 33, (10) for 30 Deck SCREW, 1/-20 Hex Washer Self-Tap (2) 3-02 WING-NUT, /16-18 (2) BOLT, 3/8-16 x 3/ Hex Flange Lock (3) COVER, 2 Mulcher COVER, 28 Mulcher COVER, 33 Mulcher NUT, 1/-20 Hex Flange Lock Grade 3-08 BOLT, 1/-20 x 1/2 Hex Flange Lock BRACKET, Anti-Scalp, 30 R.H BRACKET, Anti-Scalp, 30 L.H BRACKET, Anti-Scalp, 30 L.H BRACKET, Anti-Scalp, 30 R.H BLADE, Ninja BLADE, Ninja BLADE, Ninja BLADE, Ninja BLADE, 2 Mulcher BLADE, 28 Mulcher BLADE, 33 Mulcher BLADE (High Lift) BLADE (High Lift) BLADE BLADE (High Lift) BLADE BLADE BLADE R. E. RIDER SERIES 16 & 18 1 MANUAL No. 0608

20 RAILS, LIFT ARMS, CAM LIFT (2, 28, 30 & 33 Models) (Series 16) A B A, B 2 3 MANUAL No R. E. RIDER SERIES 16 & 18

21 RAILS, LIFT ARMS, CAM LIFT (2, 28, 30 & 33 Models) (Series 16) 1-8 ARM, Rear Lift (2 Deck Only) ROD, Leveling QUADRANT, Lift Lever 2- SPRING, Extension 2-88 LEVER, Lift BRACE, Top 3-18 GUIDE, Belt RAIL, Left Hand A RAIL, R.H. (2 Deck) B -388 RAIL, R.H. (28, 30 & 33 Decks) SCREW, 3/8-16 x 1 Hex Washer Self-Tap ARM, Front Lift, Adjustable ROD, Support (Front Lift Arm to Front End) 1-8 SNAP RING, /16 External ARM, Leveling GRIP, Height Adjustment Lever SCREW, /16-18 x /8 Truss Head Self-Tap (Torx) (2) PIN, 1/8 x 3/ Cotter HUB, Deck Lift COVER, Height of Cut NUT, 3/8-2 Hex Nyloc SCREW, 3/8-16 x Hex Washer Self-Tap (6) SCREW, /16-18 x /8 Hex Washer Self-Tap BOLT, /16-2 x 1-/8 Tapered Axle NUT, /16-2 Hex Flange Lock PIN, 3/16 x 1 Roll RING, Red (2) CABLE, Rear Deck (. ) RING, White (2) 2A 2-62 BRACKET, Deck Lift (2 Deck Only!) 2B 3-6 BRACKET, Lift Assist (28, 30 & 33 Decks) ARM, Front Lift-Left (30 & 33 Decks) PIVOT, Leveling SCREW, 1/-20 x 3/ Hex Washer Self-Tap PIN, 3/16 x 3/ Roll SPRING, Latch 3-0 LATCH GRIP, Lift Latch PIN, 1/ x 1-1/ Clevis COTTER-PIN, 1/16 x 3/ 3-03 COTTER-PIN, 3/16 x 1-1/ SCREW, /16-18 x 1/2 Hex Washer Self-Tap SCREW, 1/-20 x /8 Hex Washer Self-Tap BOLT, /16-18 x /8 Hex Flange Lock (3) 3-08 NUT, /16-18 Hex Flange Lock(3) WASHER, 3/8 Flat -162 ARM, Rear Lift (28, 30 & 33 Decks) RING, Blue SWIVEL COVER, Chain -103 HAIRPIN, 3/32 x 1-1/ HOOK, Chain (2) 1-08 BOLT, 1/-20 x 1/2 Hex Flange Lock NUT, 1/-20 Hex Flange Lock ECCENTRIC -03 COTTER-PIN, 3/16 x 3/ R. E. RIDER SERIES 16 & MANUAL No. 0608

22 RAILS, LIFT ARMS, CAM LIFT (28, 30 & 33 Models) (Series 18) A B A, B MANUAL No R. E. RIDER SERIES 16 & 18

23 RAILS, LIFT ARMS, CAM LIFT (28, 30 & 33 Models) (Series 18) 1-8 ARM, Rear Lift (2 Deck Only) ROD, Leveling QUADRANT, Lift Lever 2- SPRING, Extension 2-88 LEVER, Lift BRACE, Top 3-18 GUIDE, Belt RAIL, Left Hand A RAIL, R.H. (2 Deck) B -388 RAIL, R.H. (28, 30 & 33 Decks) SCREW, 3/8-16 x 1 Hex Washer Self-Tap ARM, Front Lift, Adjustable (30 & 33 Decks) ROD, Support (Front Lift Arm to Front End) 1-8 SNAP RING, /16 External ARM, Leveling (2 Deck) GRIP, Height Adjustment Lever SCREW, /16-18 x /8 Truss Head Self-Tap (Torx) (2) PIN, 1/8 x 3/ Cotter HUB, Deck Lift COVER, Height of Cut NUT, 3/8-2 Hex Nyloc SCREW, 3/8-16 x /8 Hex Washer Self-Tap (6) SCREW, /16-18 x /8 Hex Washer Self-Tap BOLT, /16-2 x 1-/8 Tapered Axle NUT, /16-2 Hex Flange Lock PIN, 3/16 x 1 Roll RING, Red (2) CABLE, Rear Deck (2 Deck) RING, White (2) (2 Deck) 2A 2-62 BRACKET, Deck Lift (2 Deck Only!) 2B 3-6 BRACKET, Lift Assist (28, 30 & 33 Decks) ARM, Front Lift-Left (30 & 33 Decks) PIVOT, Leveling SCREW, 1/-20 x 3/ Hex Washer Self-Tap PIN, 3/16 x 3/ Roll SPRING, Latch 3-0 LATCH (Weldment) GRIP, Lift Latch PIN, 1/ x 1-1/ Clevis COTTER-PIN, 1/16 x 3/ 3-03 COTTER-PIN, 3/16 x 1-1/ SCREW, /16-18 x 1/2 Hex Washer Self-Tap SCREW, 1/-20 x /8 Hex Washer Self-Tap BOLT, /16-18 x /8 Hex Flange Lock (3) 3-08 NUT, /16-18 Hex Flange Lock(3) WASHER, 3/8 Flat -162 ARM, Rear Lift (28, 30 & 33 Decks) RING, Blue SWIVEL COVER, Chain -103 HAIRPIN, 3/32 x 1-1/ HOOK, Chain (2) 1-08 BOLT, 1/-20 x 1/2 Hex Flange Lock NUT, 1/-20 Hex Flange Lock ECCENTRIC -03 COTTER-PIN, 3/16 x 3/ ANCHOR SCREW, /16-2 x 3/ Hex Head Cap, Grade (2-031 WASHER, /16 Internal Tooth Lock (2) NUT, /16-2 Hex (2) -323 ASSEMBLY, Clutch Plate R. E. RIDER SERIES 16 & MANUAL No. 0608

24 BLADE STOP PEDALS PEDAL, Blade Stop Control SPRING, Latching SPRING, Pedal 1- BOLT, 3/8-2 x 3/" Shoulder 1-6 BOLT, 3/8-2 x /16" Shoulder 6 1- ECCENTRIC, Leveling WASHER, 3/8 Flat WASHER, 1/2 Flat (2) -028 NUT, 3/8-2 Hex Center Lock WASHER, 3/8 Internal Tooth Lock MANUAL No R. E. RIDER SERIES 16 & 18

25 1 ASSEMBLY 3 SPINDLE 2 6 NOTE: Spindle housing assembly, Part no includes Items and ASSEMBLY, Spindle Housing (Includes Items 2 Thru ) RING, 1.8 Internal Retaining (2) BEARING, Spindle (2) -060 WELDMENT, Spindle Housing FITTING, Lube (for 3/16 diameter hole) 6-8 SPINDLE, Rider (10.32 overall length) 1-03 WASHER, 3/ Shim WASHER, Spindle 3-1 HOLDER, Blade SPACER, Blade Centering NUT, /8-18 Hex Center Lock SCREW, 1/2-20 x 1-1/ Hex Head Cap, Grade (2) -13 NUT, 1/2-20 Hex Jam (2) R. E. RIDER SERIES 16 & 18 2 MANUAL No. 0608

26 BELTS, BRAKES, INTERLOCK (2 MODELS) (Series 16; Early Production) ITEM 26 HANDLE P.N. 3-8 ITEM 30 SCREW P.N AUTOMATIC BLADE STOP (ABS) ASSEMBLY ITEM 31 BRACKET P.N ITEM 2 SWEEP P.N ITEM 28 SPOOL P.N. -2 ITEM 33 LATCH ASS Y. P.N BELT, Drive (2.2 AA Section) NUT, 3/-16 Hex Jam WASHER,/6x1-1/2 Flat (2) PULLEY, Spindle 1-20 HUB, Pulley 6-11 SCREW, 3/8-2 x 1-3/ Hex Head Cap, Grade -1 WASHER, 3/8 Flat PULLEY, Idler RESTRICTOR, Belt 10-8 ARM, Idler NUT, 3/8-2 Hex Nyloc (2) RING, 2 External Retain (2) 1-0 WASHER, Spindle -003 PIN, 3/32 x 3/ Cotter (2) SPRING SPACER DRUM, Brake PIN, 1/ x 1-/8 Clevis BAND, Brake WASHER, 3/8 Flat WASHER, 1/ Flat HAIRPIN, /6 x 1-3/ BRACKET, Brake Anchor STUD (3/8-2 Thread) CABLE & SPRING, Clutch Assembly HANDLE, Blade Lever (ON- OFF) SWEEP, ABS 28-2 SPOOL SPRING, ABS Return Latch SCREW, 1/-20 x /8 Hex Washer Head Self-Tap () BRACKET, Interlock Switch SWITCH, Deck Interlock ASSEMBLY, Clutch Latch GRIP, Handle MANUAL No R. E. RIDER SERIES 16 & 18

27 6 1 1 BELTS, BRAKES, INTERLOCK (28, 30, 33 MODELS) (Series 16; Early Production) ITEM 2 HANDLE P.N. 3-8 ITEM 3 SCREW P.N ITEM 30 SWEEP P.N ITEM 32 SPOOL P.N. -2 ITEM 3 BRACKET P.N ITEM 36 LATCH ASSEMBLY P.N AUTOMATIC BLADE STOP (ABS) ASSEMBLY 1-63 BELT, Drive (.18 L Sect.) NUT, 3/-16 Hex Jam WASHER,/6x1-1/2 Flat (2) PULLEY, Spindle 1-20 HUB, Pulley 6-01 NUT, 3/8-2 Hex, Grade 2 (3) 2-62 PULLEY, Idler 8 - SCREW, 3/8-16 x 1-1/2 Hex Head Cap, Grade (2) 3-28 BRACKET, Fixed Idler BRACE SCREW, /16-18 x 1/2 Hex Washer Head Self-Tap () WASHER, Spindle 1-00 RING, 2 External Retain (2) -003 PIN, 3/32 x 3/ Cotter (3) SPRING 16-8 ARM, Idler SPACER IDLER, -1/8 Flat 1-1 WASHER, 3/8 Flat ( DRUM, Brake PIN, 1/ x 1-/8 Clevis BAND, Brake WASHER, 3/8 Flat 2-00 WASHER, 1/ Flat WASHER, 3/8 Split Lock BRACKET, Brake Anchor STUD (3/8-2 Thread) CABLE & SPRING, Clutch Assembly HANDLE, Blade Lever (ON- OFF) SWEEP, ABS GRIP, Handle 32-2 SPOOL SPRING, ABS Return Latch SCREW, 1/-20 x /8 Hex Washer Head Self-Tap () BRACKET, Interlock Switch ASSEMBLY, Clutch Latch SWITCH, Deck Interlock MANUAL No R. E. RIDER SERIES 16 & 18

28 BELTS, BRAKES, INTERLOCK (2 MODELS) (Series 16) MANUAL No R. E. RIDER SERIES 16 & 18

29 BELTS, BRAKES, INTERLOCK (2 MODELS) (Series 16) BELT, Drive (2. AA Section) PULLEY, Spindle PULLEY, Idler RESTRICTOR, Belt -8 ARM, Idler (weldment) ROD, Idler -2 HANDLE, Blade Lever (On-Off) (weldment) GRIP, Handle 1-82 SWITCH, Deck Interlock MOUNT, Handle SPRING, Blade Handle SPACER 1-00 RING, 2 External Retaining (2) 3-38 DRUM, Brake BAND, Brake PIN, 1/ x 1-/8" Clevis 1-63 SPRING SCREW, 1/-20 x /8" Hex Washer Self-Tap (2) HUB, Pulley WASHER, 3/8 Flat WASHER, 1/ Flat (2) NUT, 3/-16 Hex Jam 23 - SCREW, 3/8-16 x 1-1/2 Hex Head Cap, Grade 2-12 NUT, 3/8-16 Hex Nyloc PIN, 3/32 x 3/" Cotter (3) SCREW, #10-32 x 1" Hex Washer Self-Tap WASHER, /6 x 1-1/2" Flat (2) 28-1 WASHER, 3/8 Flat STUD (3/8-2 Thread) BRACKET, Brake Anchor HAIRPIN, /16 x 1-3/ WASHER, 3/ Flat (3) R. E. RIDER SERIES 16 & 18 2 MANUAL No. 0608

30 BELTS, BRAKES, INTERLOCK (28, 30", & 33 MODELS) (Series 16) MANUAL No R. E. RIDER SERIES 16 & 18

31 BELTS, BRAKES, INTERLOCK (28, 30", & 33 MODELS) (Series 16) 1-38 BELT, Drive (3. AA Section) NUT, 3/-16 Hex Jam WASHER, /6 I.D. x 1-1/2 O.D. Flat (2) PULLEY, Spindle 1-20 HUB, Pulley 6-12 NUT, 3/8-16 Nyloc (2) 2-62 PULLEY, Idler (2) 8 - SCREW, 3/8-16 x 1-1/2 Hex Head Cap, Grade (2) 3-28 BRACKET, Fixed Idler BRACE SCREW, /16-18 x 1/2 Hex Washer Self-Tap () WASHER, Spindle 1-00 RING, 2 External Retaining (2) -003 PIN, 3/32 x 3/ Cotter () SPRING 16-8 ARM, Idler SPACER GRIP, Handle 1-1 WASHER, 3/8 Flat (2) DRUM, Brake PIN, 1/ x 1-/8 Clevis BAND, Brake WASHER, 3/8 Flat (2) 2-00 WASHER, 1/ Flat (2) WASHER, 3/8 Split Lock BRACKET, Brake Anchor STUD (3/8-2 Thread) 28-2 HANDLE, Blade Lever (ON-OFF) SPRING, Blade Handle ROD, Idler SCREW, #10-32 x 1 Hex Washer Self-Tap SWITCH, Deck Interlock MOUNT, Handle SCREW, 1/-20 x /8 Hex Washer Self-Tap (2) LINK, Chain NUT, 3/8-2 Hex, Grade 2 R. E. RIDER SERIES 16 & MANUAL No. 0608

32 BELTS, BRAKES, INTERLOCK (28, 30", & 33 MODELS) (Series 18) SEE PAGE 22, ITEM 3 MANUAL No R. E. RIDER SERIES 16 & 18

33 BELTS, BRAKES, INTERLOCK (28, 30", & 33 MODELS) (Series 18) 1-38 BELT, Drive (3. AA Section) NUT, 3/-16 Hex Jam WASHER, /6 I.D. x 1-1/2 O.D. Flat (2) PULLEY, Spindle 1-20 HUB, Pulley 6-12 NUT, 3/8-16 Nyloc (2) 2-62 PULLEY, Idler (2) 8 - SCREW, 3/8-16 x 1-1/2 Hex Head Cap, Grade (2) 3-28 BRACKET, Fixed Idler BRACE SCREW, /16-18 x 1/2 Hex Washer Self-Tap () HANDLE, Blade Engage (Flip) 1-00 RING, 2 External Retaining (2) -003 PIN, 3/32 x 3/ Cotter (3) SPRING, Extension, x 1/2 Diameter 16-8 ARM, Idler SPACER GRIP, Handle 1-1 WASHER, 3/8 Flat (2) DRUM, Brake PIN, 1/ x 1-/8 Clevis BAND, Brake WASHER, 3/8 Flat (2) 2-00 WASHER, 1/ Flat () 2-66 EYE-BOLT, 1/-20 x SPRING, Flip Handle 2-1 PIN, 3/16 x 1 Clevis HANDLE, Blade Lever (ON-OFF) SPRING, Blade Handle ROD, Idler SCREW, #10-32 x 1 Hex Washer Self-Tap SWITCH, Deck Interlock MOUNT, Handle SCREW, 1/-20 x /8 Hex Washer Self-Tap (2) 3-0 PIN, 3/32 x 1/2 Cotter NUT, 1/-20 Hex Top Lock BUSHING SPRING R. E. RIDER SERIES 16 & MANUAL No. 0608

34 DRIVE DISC ASSEMBLY ASSEMBLY,.18 O.D. Drive Disc (30" & 33" Models) (Includes Items 2 Thru ) ASSEMBLY, 6 O.D. Drive Disc (2" & 28 Models) (Includes Items 2 Thru ) HUB PULLEY, Drive (. O.D.) (2 & 28 Models) PULLEY, Drive (.18 O.D.) (30 & 33 Models) -02 SCREW, 3/8-16 x 3/8 Set (2) KEY, 1/ Square x 2 MANUAL No R. E. RIDER SERIES 16 & 18

35 1 2 FUEL TANK & OPERATORS SEAT 3 3A A A 12 SOLID SEAT MOUNT HINGED SEAT MOUNT SEAT, Operator (DeLuxe Back) SEAT, Operator (28, 30, 33 - Series 18) SEAT, Operator (33 Kohler- Series 18) 2-10 ASSEMBLY, Fuel Tank (Includes Item 3) ASSEMBLY, Fuel Tank With Gauge (Includes Item 3A) CAP, Fuel Tank 3A 1-3 CAP, Fuel Tank (With Gauge) -622 HOSE, Fuel (8-1/2" Long) (Briggs & Stratton: 8HP thru HP) HOSE, Fuel (12-1/2 Long) (Kohler Only!) 1-3 FILTER, Fuel (In-Line) CLAMP, Fuel Line () 3-33 BRACKET, Fuel Tank (Rear) 8-12 SCREW, /16-18 x /8" Pan Head Self-Tap (Torx #T-0) (2) KNOB, Seat Adjusting (2) A 2-86 KNOB, Hinged Seat (2) SPACER, /16 (2) VALVE, Fuel Shut-Off (Accessory) BOLT, /16-18 x 1/2" Hex Flange Lock w/nylon Patch (2) 2-33 SWITCH, Seat A SWITCH, Seat R. E. RIDER SERIES 16 & 18 3 MANUAL No. 0608

36 ENGINES & EXHAUST MUFFLER ENGINE H.P. START TYPE ENGINE MFGR. MFGR. MODEL MFGR. TYPE 8.0 ROPE BRIGGS & STRATTON ELECTRIC BRIGGS & STRATTON ELECTRIC BRIGGS & STRATTON C.A.R.B ELECTRIC BRIGGS & STRATTON C.A.R.B. 28A0 062-A ELECTRIC BRIGGS & STRATTON 28A ELECTRIC BRIGGS & STRATTON ELECTRIC BRIGGS & STRATTON C.A.R.B. 28M E1.0 ELECTRIC BRIGGS & STRATTON ELECTRIC KOHLER CVST PS-0. ELECTRIC BRIGGS & STRATTON C.A.R.B E1 1.0 ELECTRIC KOHLER CV1ST PS MUFFLER, 8HP Briggs 2-8 BRACKET, Heat Shield 3-16 MUFFLER (B&S - HP) (Includes items 11 & 12) SCREW, /16-18 x 3/ Hex Head Cap, Grade 2 (2) -18 SCREW, 1/-20x1-1/ Hex Head Cap MUFFLER (Kohler /1 HP) 2-86 MUFFLER (B&S & -1/2 HP) SCREW, 1/-20 x 3/8 Hex Washer Self-Tap (3) 1-38 SPACER (2) NUT, 1/-20 Hex Flange Lock DEFLECTOR, Heat SCREW #8-18 x 3/8 Type AB Modified SCREW, 1/-20 x /8 Hex Washer Self-Tap - SCREW, 1/-20 x 3/ Hex Head Cap, Grade GASKET, Muffler SCREW, 1/-20 x 1 Hex Head Cap, Grade 1-12 WASHER, 1/ Flat WASHER, 1/ Split Lock MANUAL No R. E. RIDER SERIES 16 & 18

37 THROTTLE CONTROL CONTROL, Throttle (Briggs Engines) CONTROL, Throttle (Kohler Engine) 2-0 SCREW, #10-2 x 1/2 Hex Washer Self-Tap (Torx) () COVER, Dash Panel (Electric Start) COVER, Dash Panel (Manual Start) (not shown) -121 RIVET, Plastic Snap 2-36 KNOB, Throttle Control R. E. RIDER SERIES 16 & 18 3 MANUAL No. 0608

38 DECALS (Series 16) MANUAL No R. E. RIDER SERIES 16 & 18

39 DECALS (Series 16) DECAL, 2 Inch DECAL, 28 Inch DECAL, 30 Inch 2-21 DECAL, 33 Inch DECAL, Battery SNAPPER, (Molded Logo) 3- LOGO, Convertible (Silver) (2 & 30, 10 HP Models) LOGO, Convertible (Teal) (30, 12 HP Models) LOGO, Convertible (Blue) (33 Models) DECAL, Back-Up Recoil (30 & 33 Kohler Models) DECAL, OHV (30 & 33 Kohler Models) MEDALLION, Sam DECAL, HP (30 & 33 Kohler Models) DECAL, Auto Blade Stop (Point of Purchase Decal) -60 DECAL, Safety Instruction Warning 1-62 DECAL, Caution Deflector DECAL, Caution Rotating Blades DECAL, Danger DECAL, Caution Battery DECAL, Belt Adjustment (Used on 2 Models) * 2-80 DECAL, SR82 * 2- DECAL, SR1028 * 2- DECAL, SR1030 * 2-80 LOGO, SR1230 (Molded) * 2-88 LOGO, SR33 (Molded) * 2-82 LOGO, SR33 (Molded) * 2-02 DECAL, Banner Stripe (Silver) (2, 28, 30 Mod.) * 2-03 DECAL, Banner Stripe (Teal) (30 Models) * 2-0 DECAL, Banner Stripe (Blue) (33 Models) * DECAL, Bumper Stripe (Silver) (2", & 28 Models) * DECAL, Bumper Stripe (Teal) (30" Models) * 2-00 DECAL, Bumper Stripe (Blue) (33" Models) * DECAL, Bumper Stripe (Silver) (30 Models) DECAL, Caution Fuel *NOTE: These items NOT SHOWN. The description is the visual identification. R. E. RIDER SERIES 16 & 18 3 MANUAL No. 0608

40 DECALS (Series 18) MANUAL No R. E. RIDER SERIES 16 & 18 10

41 DECALS (Series 18) DECAL, 28 Inch DECAL, 30 Inch DECAL, 33 Inch 2-02 DECAL, Auto Blade Stop -620 DECAL, Chute/Deflector Warning 6-60 DECAL, Safety Instructions -126 LOGO, Convertible Mower (Blue) DECAL, Patent Numbers -220 DECAL, Certification, B DECAL, Battery DECAL, Battery Caution DECAL, Back-Up Recoil DECAL, Danger (CPSC) 2-1 DECAL, Caution, Fuel (English) DECAL, OHV 16* -60 LOGO, SR28 * -610 LOGO, SR30 * 2-82 LOGO, SR33 * -611 LOGO, SR133 * -603 DECAL, Banner (Blue) * -60 BUMPER STRIPE, (Narrow Blue) * 2-00 BUMPER STRIPE, (Wide Blue) *NOTE: These items NOT SHOWN. The description is the visual identification. R. E. RIDER SERIES 16 & 18 1 MANUAL No. 0608

42 ELECTRICAL SYSTEMS (For 8 HP Recoil Wiring Diagram) TO ITEM TO ITEM 11 H 12 G TO ITEM 1 (D,E,F) TO ITEM 1 (A) 1 10 G TO ITEM 3 3 MAGNETO SHORTING BLOCK 11 G. MAGNETO SHORTING BLOCK (SEE INSET) H. ENGINE GROUND MANUAL No R. E. RIDER SERIES 16 & 18

43 ELECTRICAL SYSTEMS (For 8 HP Recoil Wiring Diagram) INTERLOCK, Module (Briggs) HARNESS, Deck Interlock SWITCH, Deck Interlock Wiring (NO) WASHER, /8 Internal Tooth Lock 1-38 NUT, /8-32 Hex KEY, Switch (2) 1-2 WIRE, Ground (Recoil Start) TIE, " Long Cable (2) 1-1 TIE, 2" Long Cable SWITCH, (Recoil Start) (NC in off position) SWITCH, Operator s Presence (OPC) Traction (NC/NO) HARNESS, Operator s Presence Control (OPC) Wire SWITCH, Seat (8 HP & 10 HP Engines) (NC) R. E. RIDER SERIES 16 & 18 3 MANUAL No. 0608

44 ELECTRICAL SYSTEMS (For 8, 10, 12 & HP Briggs) TO ITEM J I TO ITEM 2 TO ITEM H G TO ITEM 6 (D, E, F) TO ITEM 6 (A) TO ITEM 11 H 2 2 TO ITEM L 3 K L G. MAGNETO SHORTING BLOCK (See Inset, Pg. ) L M L 18 H. ENGINE GROUND I. ALTERNATOR CHARGING WIRE 22 J. STARTER TERMINAL M G TO ITEM K 1 MANUAL No R. E. RIDER SERIES 16 & 18

45 ELECTRICAL SYSTEMS (For 8, 10, 12 & HP Briggs) KIT, 12V Dry Charge Battery SOLENOID HARNESS, Starter Wiring (Briggs) 1-2 HARNESS, Ignition Wiring (Briggs) HOLDER, Fuse (Includes Fuse) FUSE (10 AMP) INTERLOCK Module (Briggs) HARNESS, (Deck Interlock Wiring) SWITCH, Deck Interlock (NO) 1-2 COVER, Battery Cable CABLE, Positive (Red) SWITCH, Ignition (Used With Electric Start) WASHER, /8 Internal Tooth Lock 1-38 NUT, /8-32 Hex 1-18 KEY, Switch (2) 1-03 SCREW, 1/-20 x 1/2" Hex Washer Self-Tap (3) PROTECTOR, Solonoid (2 Models Only!) 1-16 NUT, 1/-20 Hex, Grade or B () WASHER, 1/ Internal Tooth Lock (2) SCREW, 1/-20 x /8" Hex Head Cap, Grade (2) CABLE, Negative HARNESS, Operator Presence Control Wire NUT, 1/-20 Hex, Grade or B TIE, " Long Cable (2) NUT, 1/-20 Hex Center Lock, Grade or B (2) TIE, 2" Long Cable SWITCH, Seat (8 HP and 10 HP Engines Only!) (NC) SWITCH, Operator Presence Control (OPC) Traction (NC/NO) RETAINER, 1/ Bolt (2 Models Only!) (2) SWITCH, Seat (12 HP Briggs) (NC) MAGNETO SHORTING BLOCK R. E. RIDER SERIES 16 & 18 MANUAL No. 0608

46 ELECTRICAL SYSTEMS (For HP BRIGGS) 8 TO ITEM 8 TO ITEM 2 J I TO ITEM H G TO ITEM 6 TO ITEM 6 (A) H 2 TO ITEM 11 TO ITEM 6 L 16 K L G. MAGNETO SHORTING BLOCK (See Inset, Page ) 21 L M L 18 H. ENGINE GROUND I. ALTERNATOR CHARGING WIRE 22 M J. STARTER TERM INAL TO ITEM N K TO CARBURETOR SOLENOID 1 MANUAL No R. E. RIDER SERIES 16 & 18

47 ELECTRICAL SYSTEMS (For HP BRIGGS) KIT, 12V Dry Charge Battery SOLENOID HARNESS, Starter Wiring (Briggs) 2-1 HARNESS, Ignition Wiring (Briggs) HOLDER, Fuse (Includes Fuse) FUSE (10 AMP) INTERLOCK Module (Briggs) HARNESS, (Deck Interlock Wiring) SWITCH, Deck Interlock (NO) 1-2 COVER, Battery Cable CABLE, Positive (Red) SWITCH, Ignition-Afterfire Solenoid WASHER, /8 Internal Tooth Lock 1-38 NUT, /8-32 Hex 1-18 KEY, Switch (2) 1-03 SCREW, 1/-20 x 1/2" Hex Washer Self-Tap (3) SWITCH, Operator Presence Control (OPC) Traction (NC/NO) 1-16 NUT, 1/-20 Hex, Grade or B () WASHER, 1/ Internal Tooth Lock (2) SCREW, 1/-20 x /8" Hex Head Cap, Grade (2) CABLE, Negative (1 ) HARNESS, Operator Presence Control Wire NUT, 1/-20 Hex, Grade or B TIE, " Long Cable (2) NUT, 1/-20 Hex Cent er Lock, Grade or B (2) TIE, 2 Long Cable RETAINER, 1/ Bolt (2) SWITCH, Seat ( HP Briggs) (NC) MAGNETO SHORTING BLOCK R. E. RIDER SERIES 16 & 18 MANUAL No. 0608

48 ELECTRICAL SYSTEMS (For & 1 HP KOHLER) 8 TO ITEM 8 23 TO ITEM TO ITEM TO ITEM H TO ITEM 6 (D, E, F) TO ITEM 6 (A) 1 G TO ITEM L I 16 J 3 6 L 12 H. ENGINE GROUND I. BATTERY GROUND (See Inset, Page ) L 1 2 M L 18 G. ELECTRONIC CONTROL UNIT 22 J. STARTER TERMINAL K ENGINE MOUNTING PLATE MANUAL No R. E. RIDER SERIES 16 & 18 M TO ITEM K 1

49 ELECTRICAL SYSTEMS (For & 1 HP KOHLER) KIT, 12V Dry Charge Battery SOLENOID HARNESS, Starter Wiring (Kohler) HARNESS, Ignition Wiring (Kohler) HOLDER, Fuse (Includes Fuse) FUSE (10 AMP) INTERLOCK Module HARNESS, (Deck Interlock Wiring) SWITCH, Deck Interlock (NO) 1-2 COVER, Battery Cable CABLE, Positive (Red) (1 Long) SWITCH, Ignition (Used With Electric Start) WASHER, /8 Internal Tooth Lock 1-38 NUT, /8-32 Hex 1-18 KEY, Switch (2) 1-03 SCREW, 1/-20 x 1/2" Hex Washer Self-Tap (3) SWITCH, Operator Presence Control (OPC)Traction (NC/NO) 1-16 NUT, 1/-20 Hex, Grade or B () WASHER, 1/ Internal Tooth Lock (2) SCREW, 1/-20 x /8" Hex Head Cap, Grade (2) CABLE, Negative (1 ) HARNESS, Operator Presence Control Wire NUT, 1/-20 Hex, Grade or B TIE, " Long Cable (2) NUT, 1/-20 Hex Center Lock, Grade or B (2) TIE, 2 Long Cable RETAINER, 1/ Bolt (2) SWITCH, Seat (NC) BATTERY GROUND SCREW FRONT VIEW OF ENGINE R. E. RIDER SERIES 16 & 18 MANUAL No. 0608

50 WIRING SCHEMATICS WIRING SCHEMATIC FOR 8 HP RECOIL START (Briggs Engine) MANUAL No R. E. RIDER SERIES 16 & 18

51 WIRING SCHEMATICS WIRING SCHEMATIC FOR 8, 10, 12 & HP (Briggs Engines) R. E. RIDER SERIES 16 & 18 1 MANUAL No. 0608

52 WIRING SCHEMATICS WIRING SCHEMATIC FOR HP (Briggs Engine) MANUAL No R. E. RIDER SERIES 16 & 18

53 WIRING SCHEMATICS WIRING SCHEMATIC FOR & 1 HP (Kohler Engines) R. E. RIDER SERIES 16 & 18 3 MANUAL No. 0608

54 HARDWARE BAGS LOCATION HARDWARE BAG (includes items listed below) PLUG, Oil Fill & Check (2)... page, item 18 & page 1, item SPACER, 21/6 (2)... page 3, item PIN, 1/ x 1-1/2 Roll... page, item KNOB, Hinged Seat (2)... page 3, item A FOAM COVER, Steering Shaft... page, item COVER, Steering Shaft... page, item -032 NUT, 1/-20 Hex Center Lock (2)... pg.,,, item NUT, /16-2 Hex, Grade (2)... page, item BOLT, /16-18 x 1/2 Hex Flange Lock (2)... page 3, item WASHER, /16 Split Lock (2)... page, item PIN, 3/16 x 1-1/2 Cotter... page, item 16 LOCATION HARDWARE BAG (includes items listed below) PLUG, Oil Fill & Check (2)... page, item 18 & page 1, item SPACER, 21/6 (2)... page 3, item PIN, 1/ x 1-1/2 Roll... page, item KNOB, Hinged Seat (2)... page 3, item A FOAM COVER, Steering Shaft... page, item COVER, Steering Shaft... page, item -032 NUT, 1/-20 Hex Center Lock (2)... pg.,, item BUSHING, Tie Rod (2)... page, item BOLT, /16-18 x 1/2 Hex Flange Lock (2)... page 3, item SCREW, 1/-20 x /8 Hex Head Cap, Grade (2)... pg.,, item PIN, 3/16 x 1-1/2 Cotter... page, item PIN, /32 x 1 Cotter (2)... page 3, item 11 & page, item 28-1 WASHER, 3/8 Flat (2)... page, item 8 MANUAL No R. E. RIDER SERIES 16 & 18

55 ACCESSORIES & ATTACHMENTS SNAPPER REAR ENGINE RIDER ACCESSORIES* PART NO. DESCRIPTION OF KIT MODELS USED ON Wheel Weight (8 Wheels)... All Rear Engine Riders Smooth Start Clutch... All Rear Engine Riders Drive Disc Puller... All RER Aluminum Drive Discs Dump Cart... All Rear Engine Riders Gauge Wheel... All 33 Deck Rear Engine Riders Gauge Wheel... All 1 & 2 Deck Rear Engine Riders Single Bag Catcher... All 2 Deck Rear Engine Riders Single Bag Catcher... All 26 & 30 Deck Rear Engine Riders Single Bag Catcher... All 28 & 33 Deck Rear Engine Riders Single Bag Catcher... All 38 Deck Rear Engine Riders Single Bag Catcher... All 1 & 2 Deck Rear Engine Riders Twin Bag Catcher... All 28 & 33 Deck Rear Engine Riders Twin Bag Catcher... All 38 Deck Rear Engine Riders Twin Bag Catcher... All 1 & 2 Deck Rear Engine Riders Bag-N-Wagon... All 28 & 33 Deck Rear Engine Riders Thatcherizer... All Series & Newer Riders Wagon Cover... All 28 & 33 Deck Rear Engine Riders Weight (Front)... All Series & Newer Riders Dozer Blade (36 Blade)... All Rear Engine Riders Tire Chains (Tires-16 x 6.0-8)... All Rear Engine Riders Tire Chains (Tires-16 x.80-8)... All Rear Engine Riders Ninja Recycling (Cover)... All 2 Deck Rear Engine Riders Recycling (Cover)... All 2 Deck Rear Engine Riders Ninja Recycling (Cover)... All 28 Deck Rear Engine Riders Ninja Recycling (Cover)... All 30 Deck Rear Engine Riders Ninja Recycling (Cover)... All 33 Deck Rear Engine Riders Ninja Recycling (Cover)... All 1 & 2 Deck Rear Engine Riders Utility Trailer (10 Cubic Feet) Aerator (36 ) Dethatcher (0 ) Lawn Sweeper (36 ) Dethatcher Kit (For 36 Sweeper) Lawn Roller (2 & 36 ) Broadcast Spreader (3. Feet) *For illustrated parts lists see manual # R. E. RIDER SERIES 16 & 18 MANUAL No. 0608

56 Parts Manual for REAR ENGINE RIDER SERIES 16 & 18 COPYRIGHT 1 SNAPPER INC. ALL RIGHTS RESERVED MANUAL No (Rev., 08/21/02) Printed in U.S.A.