MID MOUNT Z-RIDER ZERO TURNING HYDRO DRIVE NZMJ SERIES 1 & 2

Transcription

1 Parts Manual for ZERO TURNING HYDRO DRIVE NZMJ SERIES 1 & 2 MODEL NZMJ23521KH NZMJ23522KH NZMJ25611KH NZMJ25612KH McDonough, GA, U.S.A. COPYRIGHT 2005 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision 3, 7/11/2005

2

3 Table Of Contents PAGE GROUP 4 CASTER WHEEL ASSEMBLY 6 DRIVE TIRE & WHEEL ASSEMBLY 8 FRONT FRAME ASSEMBLY PT.1 12 FRONT FRAME ASSEMBLY PT.2 14 REAR FRAME & TANK BRACKETS 16 FUEL TANK ASSEMBLY (Series 1) 18 FUEL TANK ASSEMBLY (Series 2) 20 JOYSTICK CONTROL ASSEMBLY (R. H. Side) 22 JOYSTICK CONTROL ASSEMBLY (L. H. Side) 24 PARKING BRAKE ASSEMBLY (Series 1) 26 PARKING BRAKE ASSEMBLY (Series 2) 28 HYDRO PUMP ASSEMBLIES 30 HYDRO PUMP LINKAGE 32 HOSE ASSEMBLY (52" DECK) Series1 34 HOSE ASSEMBLY (52" DECK) Series2 36 HOSE ASSEMBLY (61" DECK) Series 1 38 HOSE ASSEMBLY (61" DECK) Series 2 40 HYDRO RESERVOIR ASSEMBLY 42 HYDRO IDLER ASSEMBLY 44 ENGINE SUB-ASSEMBLY 46 SEAT ASSEMBLY 48 MUFFLER GUARD ASSEMBLY 50 52" CUTTING DECK ASSEMBLY PT " CUTTING DECK ASSEMBLY PT " CUTTING DECK ASSEMBLY PT " CUTTING DECK ASSEMBLY PT.2 58 IDLER ASSEMBLIES ( ) 60 DECK SPINDLE ASSEMBLIES 62 DECALS 64 CONTROL PANEL ASSEMBLY 66 ELECTRICAL COMPONENTS (except wiring) 68 WIRING HARNESS 70 WIRING SCHEMATIC (Kohler Engines) NZMJ SERIES 1 & 2 3

4 CASTER WHEEL ASSEMBLY 4 NZMJ SERIES 1 & 2

5 CASTER WHEEL ASSEMBLY Item Part No Qty Description Note WELDMENT, Caster Yoke used on 52 Deck Model only 1A WELDMENT, Caster Yoke, 7-1/4 Wide used on 61 Deck Model only SCREW, 1/2-13 x 7 Hex Head Cap, GR 5 used on 52 Deck Model only 2A SCREW, 1/2-13 x 9-1/2 Hex Head Cap, GR 5 used on 61 Deck Model only NUT,1/2-13 Nyloc SPACER, Bearing, 5.29 Long used on 52 Deck Model only 4A SPACER, Bearing, 7.29 Long used on 61 Deck Model only ASSY, Tire & Wheel (Incl. items 6 thru 11) used on 52 Deck Model only (Series 1) 5A ASSY, Tire & Wheel (Incl. items 6A, 7A, 8, 9A, 10 & 11) used on 61 Deck Model only (Series 1) 5B ASSY, Tire & Wheel (Incl. items 6B, 7B, 8, 9, 10 & 11) used on 52 Deck Model only (Series 2) 5C ASSY, Tire & Wheel (Incl. items 6C, 7C, 8, 9, 10 & 11) used on 61 Deck Model only (Series 2) WELDMENT, Wheel Hub & Rim (Grey) used on 52 Deck Model only (Series 1) 6A WELDMENT, Wheel Hub & Rim (Grey) used on 61 Deck Model only (Series 1) 6B WELDMENT, Wheel Hub & Rim (Grey) used on 52 Deck Model only (Series 2) 6C WELDMENT, Wheel Hub & Rim (Grey) used on 61 Deck Model only (Series 2) TIRE, 13 x Ply Slick used on 52 Deck Model only (Series 1) 7A TIRE, 13 x Ply Slick used on 61 Deck Model only (Series 1) 7B TIRE, 13 x Ply Smooth TL used on 52 Deck Model only (Series 2) 7C TIRE, 13 x Ply Smooth TL used on 61 Deck Model only (Series 2) BEARING,.750 Heim FITTING, Lube 9A FITTING, Lube, 1/4-28 Thread used on 61 Deck Model only (Series 1) VALVE STEM, Air SPACER Footnotes: NZMJ SERIES 1 & 2 5

6 DRIVE TIRE & WHEEL ASSEMBLY 6 NZMJ SERIES 1 & 2

7 DRIVE TIRE & WHEEL ASSEMBLY Item Part No Qty Description Note 1A ASSEMBLY, Rear Tire & Rim (Incl. Items 2A, 3A & 4) used on Series 1 Models 1B ASSEMBLY, 23 Rear Tire & Rim (Incl. Items 2B, 3B & 4) used on 52, Series 2 1C ASSEMBLY, 24 Rear Tire & Rim (Incl. Items 2B, 3C & 4) used on 61, Series 2 2A TIRE, 23 x NHS 4PR Kenda Super Turf 4 Ply 2B TIRE, 23 x NHS 4PR TMSTR TL (Carlisle) 3A RIM, 12 Diameter x B RIM, 12 Diameter x C RIM, 12 Diameter x VALVE, Air NUT, 1/2-20NF Lug DRUM, Brake (Hayes) used on Series 1 Models DRUM, Brake (Ausco) used on Series 2 Models PIN, 9/64 x 1-1/2 Cotter included as part of wheel motor KEY, #11 Woodruff included as part of wheel motor NUT, 3/4-20 Slotted Hex included as part of wheel motor Footnotes: NZMJ SERIES 1 & 2 7

8 FRONT FRAME ASSEMBLY PT.1 8 NZMJ SERIES 1 & 2

9 FRONT FRAME ASSEMBLY PT.1 Item Part No Qty Description Note WELDMENT, Front Frame GROUP, Front Wheel (see Caster Wheel Assembly Page) GREASE SEAL BEARING, Tapered Roller comprised of (tapered roller brg.) and (inner race) SPACER, Jackstaff CASTLE NUT, 1-1/ UNF, GR B ROLL PIN, 3/16 x 1-1/ CAP, Dust BOLT, 1/2-13 x 1-1/2 Square Neck Carriag, GR NUT, 1/2-13 Hex Nyloc BUSHING, Teflon PAD, Floor Pan EYEBOLT, 3/8-16 x NUT, 3/8-16 Hex Nyloc SPRING, Extension, Lift Assist SPACER, Lift Adjust (1.08 Long) SPACER, Lift Adjust (1.43 Long) WELDMENT, Height Adjust SCREW, 3/8-16 x 2-1/2 Hex Head Cap, GR BRACKET, Deck Lift Detent BOLT, 3/8-16 x 1 Square Neck Carriage, GR CLIP, Roll Pin, 1/ WASHER,.77 I.D. Flat RING, 3/4 External Retaining 25A FLOORPAN used on Series 1 25B FLOORPAN used on Series ASSY, Deck Lift Handle (Incl. items 27 thru 38) RING,.375 Diameter External Retaining LUBE FITTING, 3/16 (or , 1/4-28 Straight Lube Fitting) or , 1/4-28 Straight Lube Fitting WELDMENT, Deck Lift Handle SPRING, Neutral Return BRACKET, Handle Support ROD, Latch STOP, Latch SCREW, 5/16-18 x 1 Hex Head Cap, GR PIN, 3/32 x 1/2 Cotter NUT, 5/16-18 Hex Center Lock Footnotes: NZMJ SERIES 1 & 2 9

10 FRONT FRAME ASSEMBLY PT.1 10 NZMJ SERIES 1 & 2

11 FRONT FRAME ASSEMBLY PT.1 Item Part No Qty Description Note WASHER, 3/8 Flat SAE COVER, Plastic BUSHING, 3/8 Plastic ROLLPIN,1/8 x 7/8 41A MAT, Footpan (22-11/16 long) 41B MAT, Foot Pan (24-9/16 long) used on Series 2 42A MAT, Foot Pan used on Series 1 42B MAT, Foot Pan used on Series 2 Footnotes: NZMJ SERIES 1 & 2 11

12 FRONT FRAME ASSEMBLY PT.2 12 NZMJ SERIES 1 & 2

13 FRONT FRAME ASSEMBLY PT.2 Item Part No Qty Description Note NUT, 1/2-13 Hex Flange GR KEY, 3/16 Square x 1-1/ PIN, 5/32 x 1 Cotter PIN, 1/2 x 1-1/8 Clevis SCREW, 1/2-13 x 2 Hex Head Cap, GR ASSEMBLY, Chain & Eyebolt used on 52 Deck Model only 7A CHAIN, 3 Links qty. 2 on 52 Deck; qty. 4 on 61 Deck (series 1) 7B ASSEMBLY, Rear Linkage (incl. items 22 thru 25) used on 61 Deck (series 2) SET SCREW, 5/16-18 Square Head Cup Point WELDMENT, Bellcrank Lift WELDMENT, Rear Lift NUT, 1/2-13 Hex Center Lock, GR SWIVEL, Timing Rod (1/2-13 External Thread) BOLT, 5/16-18 x 1 Short Neck Carriage, GR SHIM PLATE BRACKET, Deck Support WASHER, 5/16 Flat NUT, 5/16-18 Hex Nyloc WELDMENT, Front Deck Lift ROD, Timing (1/2-13 Thread) WASHER,.531 I.D. Flat LINK, Front ROD LINK (1/2-13 thread) ROD SWIVEL (1/2-13 thread) NUT, 1/2-13 Hex, GR B WASHER, 1/2 Internal Tooth Lock Footnotes: NZMJ SERIES 1 & 2 13

14 REAR FRAME & TANK BRACKETS 14 NZMJ SERIES 1 & 2

15 REAR FRAME & TANK BRACKETS Item Part No Qty Description Note 1A WELDMENT, Rear Frame (52 Deck) 1B WELDMENT, Rear Frame (61 Deck) WELDMENT, Left Hand Fuel Tank Bracket WELDMENT, Right Hand Fuel Tank Bracket BOLT, 3/8-16 x 1 Square Neck Carriage GR NUT, 3/8-16 Hex Nyloc WASHER, 3/8 Flat CLIP, Open 3/8 Cushioned WELDMENT, Right Hand Socket Series WELDMENT, Left Hand Socket Series NUT, 3/8-16 Hex Flange Lock SCREW, 1/2-13 x 1-1/2 Hex Head Cap NUT, 1/2-13 Hex Center Lock, GR 5 Footnotes: NZMJ SERIES 1 & 2 15

16 FUEL TANK ASSEMBLY (Series 1) 16 NZMJ SERIES 1 & 2

17 FUEL TANK ASSEMBLY (Series 1) Item Part No Qty Description Note ASSEMBLY, Fuel Tank, Left Hand (Incl. items 3, 5 & 7) ASSEMBLY, Fuel Tank, Right Hand (Incl. items 3, 5 & 7) ASSEMBLY, Fuel Pickup (Incl. items 4 & 6, one each) ELBOW, 90 Degree GROMMET DIP TUBE CAP, 3-1/2 Fuel SCREW, 7/16-14 x 2 Hex Head Cap, GR WASHER, 1/2 Flat SAE BOLT, 3/8-16 x 1 Square Neck Carriage GR NUT, 7/16-14 Hex Nyloc BRACKET, Valve Mount HOSE, 1/4 I.D. x 1'-8 Long Fuel (L.H.) WASHER, 3/8 Flat NUT, 3/8-16 Hex Nyloc ASSEMBLY, 3-Way Fuel Valve CLAMP, Fuel Hose HOSE, 1/4 I.D. x 3'-7.5 Long Fuel (R.H.) HOSE, 1/4 I.D. x 1'-9 Long Fuel Footnotes: NZMJ SERIES 1 & 2 17

18 FUEL TANK ASSEMBLY (Series 2) 18 NZMJ SERIES 1 & 2

19 FUEL TANK ASSEMBLY (Series 2) Item Part No Qty Description Note ASSEMBLY, LH Fuel Tank includes: tank ( ) plus items 3, 6, 7, 8 & ASSEMBLY, RH Fuel Tank includes: tank ( ) plus items 3, 6, 7, 9 & ASSEMBLY, Fuel Pickup ELBOW, 90 Degree TUBE, Pickup GROMMET, Tube Dapco p/n GAGE, Fuel GROMMET, Gage LID, Fuel Tank CAP, 3-1/2 Fuel Kelch p/n SCREW, 7/16-14 x 2 Hex Head Cap, GR WASHER, 1/2 Flat SAE WASHER, 1/4 Flat WASHER, 1/4 Split Lock SCREW, 1/4-20 x 1-1/4 Hex Head Cap, GR SCREW, 5/16-18 x 2-1/2 Hex Head Cap, GR WASHER, 5/16 Flat NUT, 5/16-18 Hex Nyloc BOLT, 3/8-16 x 1 Square Neck Carriage, GR NUT, 3/8-16 Hex Nyloc NUT, 7/16-14 Hex Nyloc CLIP, Open 3/8 Cushioned WELL-NUT, 1/4-20 x 53/64 also shown on SEAT ASSEMBLY page ASSEMBLY, 3-Way Fuel Valve MOUNT, Auxiliary Fuel Valve HOSE, 1/4 I.D. x 1'-8 Long Fuel (L.H.) HOSE, 1/4 I.D. x 3'-7.5 Long Fuel (R.H.) HOSE, 1/4 I.D. x 1'-9 Long Fuel CLAMP, Fuel Hose CABLE TIE, 7 Long (not shown) Footnotes: NZMJ SERIES 1 & 2 19

20 JOYSTICK CONTROL ASSEMBLY (R. H. Side) 20 NZMJ SERIES 1 & 2

21 JOYSTICK CONTROL ASSEMBLY (R. H. Side) Item Part No Qty Description Note 1A COVER, Right Hand Outside used on Series 1 1B COVER, Right Hand Outside used on Series SCREW, 5/16-18 x 5/8 Hex Washer Self-Tap see also item 2, next page LIMITER BRACKET, Right Hand SCREW, 5/16-18 x 5/8 Hex Washer Self-Tap Yellow Zinc see also item 4, next page WELDMENT, Side Plate Right Hand BRACKET, Shaft Support BUSHING, Teflon Impregnated see also item 7, next page BUSHING 5/8 x 5/8 Bronze WELDMENT, Joystick Pivot WELDMENT, Bellcrank GROOVE PIN, 1/4 x 1-1/4 see also item 11, next page RING, 5/8 External Retaining see also item 12, next page DECAL, Lever Control see also Decal Page PIVOT, Joystick Control SHOULDER BOLT, 5/16-18 thread was WELDMENT, Joystick Handle LEVER, Shift Handle (Grip) WASHER,.28 x.63 x.06 Flat see also item 18, next page BALL JOINT, 1/ THREADED ROD, 1/4-28 x 3.85 long NUT, 1/4-28 Hex Nyloc SHOULDER BOLT, 1/4-20 thread shoulder: 5/16 Dia. x 3/8 long; see also item 22, next page WASHER,.34 x.69 x.08 Flat see also item 23, next page NUT, 1/4-28 Hex or NUT, 1/4-20 Hex Center Lock see also item 25, next page SCREW, 1/4-20 x 1-1/4 Hex Head Cap see also item 26, next page SPACER, Twin Stick see also item 27, next page DAMPENER, Hydraulic see also item 28, next page BRACKET, Dampener see also item 29, next page ROLL PIN, 3/16 x 3/ BRACKET, Rubber Boot BOOT, Joystick, Rubber SCREW, #10-24 x 1/2 Hex Washer Self-Tap (Torx) SCREW, 5/16-18 x 3/4 Hex Washer Self-Tap Footnotes: NZMJ SERIES 1 & 2 21

22 JOYSTICK CONTROL ASSEMBLY (L. H. Side) 22 NZMJ SERIES 1 & 2

23 JOYSTICK CONTROL ASSEMBLY (L. H. Side) Item Part No Qty Description Note SHAFT, Pivot SCREW, 5/16-18 x 5/8 Hex Washer Self-Tap MOUNT, Bearing, Left Hand SCREW, 5/16-18 x 5/8 Hex Washer Self-Tap Yellow Zinc LIMITER BRACKET, Left Hand WELDMENT, Bellcrank BUSHING, Teflon Impregnated DECAL, Parking Brake see also Decal Page DECAL, Ear Protection see also Decal Page HANDLE, Support GROOVE PIN, 1/4 x 1-1/ RING, 5/8 External Retaining CHANNEL, Joystick Mounting 14A COVER, Left Hand Outside used on Series 1 14B COVER, Left Hand Outside used on Series WASHER, 5/8 Flat BRACKET, Bearing Support SCREW, 1/4-20 x 1 Hex Head Cap, GR WASHER,.28 x.63 x.06 Flat NUT, 1/4-20 Hex Nyloc SPACER,.340 I.D. x.63 O.D. x.310 Thick SCREW, 5/16-18 x 3/4 Hex Washer Self-Tap or SHOULDER BOLT, 1/4-20 thread shoulder: 5/16 Dia. x 3/8 long WASHER,.34 x.69 x.08 Flat BELLCRANK, Dampener NUT, 1/4-20 Hex Center Lock SCREW, 1/4-20 x 1-1/4 Hex Head Cap SPACER, Twin Stick DAMPENER, Hydraulic BRACKET, Dampener Footnotes: NZMJ SERIES 1 & 2 23

24 PARKING BRAKE ASSEMBLY (Series 1) 24 NZMJ SERIES 1 & 2

25 PARKING BRAKE ASSEMBLY (Series 1) Item Part No Qty Description Note RING, 5/8 External Retaining GROOVE PIN, 1/4 x 1-1/ PIN, 3/8 Self Locking Cotter SWIVEL, Brake Link-PM SWIVEL, Adjustable SPRING, Rectangular Wire Die, Blue or , SPRING, Neutral Return Adjust WELDMENT, Brake Rod WELDMENT, Park Brake Handle WELDMENT, Brake Linkage Pivot WELDMENT, Brake Linkage Bellcrank PACKAGE, Left Hand Disc Brake Hayes p/n PACKAGE, Right Hand Disc Brake Hayes p/n BUSHING, Teflon Impregnated LINKAGE, Park Brake, Front (3/8-24 thread) 15A LINKAGE, Park Brake, Rear (3/8-24 thread) used on 52 Deck Model only 15B ROD, Brake, Rear (3/8-16 thread) used on 61 Deck Model only GRIP, Parking Brake WASHER, 3/8 Flat 18A NUT, 3/8-24 Hex Jam 18B NUT, 3/8-16, Hex Jam, GR 5 or B NUT, 5/16-18 Hex Nyloc BOLT, 5/16-18 x 3/4 Short Neck Carriage, GR WASHER,.64 I.D. Flat NUT, 3/8-24 Hex Nyloc Footnotes: NZMJ SERIES 1 & 2 25

26 PARKING BRAKE ASSEMBLY (Series 2) 26 NZMJ SERIES 1 & 2

27 PARKING BRAKE ASSEMBLY (Series 2) Item Part No Qty Description Note RING, 5/8 External Retaining GROOVE PIN, 1/4 x 1-1/4 long PIN, 3/8 Self Locking Cotter or SWIVEL, 3/8 Thru Hole, Special SWIVEL, 3/8-24 Adjustment SPRING, Rectangular Wire Die, Blue WELDMENT, Park Brake Crossrod WELDMENT, Park Brake Handle WELDMENT, Brake Linkage Pivot WELDMENT, Brake Linkage Bellcrank ASSEMBLY, Brake Ausco p/n CC BRACKET, Brake Mounting BUSHING, Teflon Impregnated FRONT LINKAGE, Park Brake (3/8-24 thread) 15A REAR LINKAGE, Park Brake (3/8-24 thread) 52 Deck Models only 15B ROD, Brake Rear (3/8-16 thread) 61 Deck Models only GRIP, Parking Brake WASHER, 3/8 SAE Flat 18A NUT, 3/8-24, Hex Jam, GR 5 or B 18B NUT, 3/8-16, Hex Jam, GR 5 or B NUT, 5/16-18 Hex Nyloc BOLT, 5/16-18 x 3/4 Short Neck Carriage, GR WASHER,.64 I.D. x.99 O.D. x.05 Flat SHOULDER BOLT, 3/8-16 Hex Socket Head NUT, 3/8-24 Hex Nyloc Footnotes: NZMJ SERIES 1 & 2 27

28 HYDRO PUMP ASSEMBLIES 28 NZMJ SERIES 1 & 2

29 HYDRO PUMP ASSEMBLIES Item Part No Qty Description Note PUMP, Hydro-Gear (BDP-10A-334) Left Hand PUMP, Hydro-Gear (BDP-10A-457) Right Hand HUB KIT for BDP-10A Pump w/thru Shaft (Incl. 1 ea. of 3 items below) (Hydro Gear p/n for BDP-10A Pump w/thru shaft) _A HUB, Fan Mount _B WASHER, Belleville, Fan Mount _C NUT, Hex Nyloc FAN, 7 Nylon, Counter-Clockwise NUT, 3/8-16 Hex Nyloc WASHER, 3/8 Flat RETAINER, 3/8 Bolt BOLT, 3/8-16 x 1-1/4 Short Neck Carriage GR PULLEY, Hydro Drive Pump Series 1 only SET SCREW, 1/4-20 x 1/2 Square Head w/patch KEY, M5 x M WASHER,.281 x 1.00 x.125 Flat WASHER, 1/4 Split Lock SCREW, M6 1.0 x 12mm Hex Head Cap PULLEY, 4.25 O.D. x OA x H Tapered Bore Double Pump; Series 2 only PULLEY, D Bushing x 15mm Bore SCREW, 1/4-20 x 1 Hex Head Cap, GR 5 Footnotes: NZMJ SERIES 1 & 2 29

30 HYDRO PUMP LINKAGE 30 NZMJ SERIES 1 & 2

31 HYDRO PUMP LINKAGE Item Part No Qty Description Note ASSY, Pump Control Linkage (Incl. 3 items below) LINKAGE ROD, Pump Control (5/16-24 threads, both ends) NUT, 5/16-24 Hex GR 5 (2 per assembly) LINKAGE (2 per assembly) SCREW, 5/16-18 x 1-1/4 Hex Head Cap GR WASHER, 5/16 Flat NUT, 5/ B Hex Nyloc Footnotes: NZMJ SERIES 1 & 2 31

32 HOSE ASSEMBLY (52" DECK) Series1 32 NZMJ SERIES 1 & 2

33 HOSE ASSEMBLY (52" DECK) Series1 Item Part No Qty Description Note MOUNT, Oil Filter Includes Filter Item # FITTING, Straight 1-12 UNF Thread FILTER, Oil SCREW, 3/8-16 x 3/4 Hex Washer Self-Tap 5A MOTOR, Hydraulic, Left Hand Includes Castle Nut & #502 Woodruff Key, 5/16 x 1 5B MOTOR, Hydraulic, Right Hand Includes Castle Nut & #502 Woodruff Key, 5/16 x BOLT, 1/2-13 x 6 Hex Head Cap GR WASHER, 1/2 Split Lock NUT, 1/2-13 Hex GR B PLATE, Mounting BOLT, 1/2-13 x 1-1/2 Square Neck Carriage, GR NUT, 1/2-13 Hex Nyloc WELDMENT, Rear Crossbrace CONNECTOR, Straight Hydraulic (Parker # 8-10 F5OLO-S) CONNECTOR, 90-Degree Hydraulic (Parker # 8-10 C5OLO-S) HOSE, 13-3/4 Hydraulic (Parker # F436BKJCJC ) SCREW, 5/16-18 x 3/4 Hex Washer Self-Tap HOSE, 17-1/2 Hydraulic (Parker # F436BKJCJ ) CONNECTOR, 90-Degree Hydraulic (Parker # 8 C5OLO-S) HOSE, 18-1/2 (Parker R836BKJCJ ) HOSE, 12-1/4 (Parker # R836BKJ9NR ) HOSE, 6-1/2 (Parker # R836BKJ9NR CONNECTOR, 90-Degree Hydraulic (Parker # 8-6 C5OLO-S CONNECTOR, Straight Hydraulic (Parker # 8-6 F5OLO-S) CONNECTOR, 45-Degree Hydraulic (Parker # V5OLO-S) PIN, 9/64 x 1-1/2 Cotter Footnotes: NZMJ SERIES 1 & 2 33

34 HOSE ASSEMBLY (52" DECK) Series2 34 NZMJ SERIES 1 & 2

35 HOSE ASSEMBLY (52" DECK) Series2 Item Part No Qty Description Note FILTER HEAD BRACKET, Filter FILTER SCREW, 5/16-18 x 5/8 Hex Washer Self-Tap 5A MOTOR, Hydraulic, Left Hand Includes Castle Nut & #502 Woodruff Key, 5/16 x 1 5B MOTOR, Hydraulic, Right Hand Includes Castle Nut & #502 Woodruff Key, 5/16 x BOLT, 1/2-13 x 6 Hex Head Cap GR WASHER, 1/2 Split Lock NUT, 1/2-13 Hex GR B MOUNTING PLATE, Hydro Motor BOLT, 1/2-13 x 1-1/2 Square Neck Carriage, GR NUT, 1/2-13 Hex Nyloc WELDMENT, Rear Crossbrace CONNECTOR, Straight Hydraulic (Parker # 8-10 F5OLO-S) CONNECTOR, 90-Degree Hydraulic (Parker # 8-10 C5OLO-S) HOSE, 13-3/4 Hydraulic (Parker # F436BKJCJC ) COTTER PIN, 1/8 x 1-1/ HOSE, 17-1/2 Hydraulic (Parker # F436BKJCJ ) CONNECTOR, 45-Degree Hydraulic (Parker #8-6 V 50L0-S) HOSE, 18-1/2 (Parker R836BKJCJ ) HOSE, 12-1/4 (Parker # R836BKJ9NR ) HOSE, 6-1/2 (Parker # R836BKJ9NR ) CONNECTOR, 90-Degree Hydraulic (Parker # 8-6 C5OLO-S) CONNECTOR, Straight Hydraulic (Parker # 8-6 F5OLO-S) CONNECTOR, 45-Degree Hydraulic (Parker # V5OLO-S) SCREW, 1/4-20 x 1/2 Hex Head Cap, GR WASHER, 1/4 Split Lock WASHER,.531 I.D. Flat Footnotes: NOTE: Order for Hose and Connector Kit for 48 & 52 Deck. NZMJ SERIES 1 & 2 35

36 HOSE ASSEMBLY (61" DECK) Series 1 36 NZMJ SERIES 1 & 2

37 HOSE ASSEMBLY (61" DECK) Series 1 Item Part No Qty Description Note MOUNT, Oil Filter Includes Filter Item # FITTING, Straight 1-12 UNF Thread FILTER, Oil SCREW, 3/8-16 x 3/4 Hex Washer Self-Tap 5A MOTOR, Hydraulic, Left Hand Includes Castle Nut & #502 Woodruff Key, 5/16 x 1 5B MOTOR, Hydraulic, Right Hand Includes Castle Nut & #502 Woodruff Key, 5/16 x BOLT, 1/2-13 x 6 Hex Head Cap GR WASHER, 1/2 Split Lock NUT, 1/2-13 Hex GR B PLATE, Mounting BOLT, 1/2-13 x 1-1/2 Square Neck Carriage, GR NUT, 1/2-13 Hex Nyloc WELDMENT, Rear Crossbrace CONNECTOR, Straight Hydraulic (Parker # 8-10 F5OLO-S) BOLT, 1/2-13 x 3-3/4 Hex Head Cap HOSE, 15-1/2 Hydraulic (Parker # F436JCJ ) HOSE, 19-1/2 (Parker # F436BKJCJ ) HOSE, 17-1/2 Hydraulic (Parker # F436BKJCJ ) CONNECTOR, 90-Degree Hydraulic (Parker # 8 C5OLO-S) HOSE, 18-1/2 (Parker R836BKJCJ ) HOSE, 12-1/4 (Parker # R836BKJ9NR ) HOSE, 6-1/2 (Parker # R836BKJ9NR CONNECTOR, 90-Degree Hydraulic (Parker # 8-6 C5OLO-S CONNECTOR, Straight Hydraulic (Parker # 8-6 F5OLO-S) CONNECTOR, 45-Degree Hydraulic (Parker # V5OLO-S) SCREW, 5/16-18 x 3/4 Hex Washer Self-Tap PIN, 9/64 x 1-1/2 Cotter Footnotes: NZMJ SERIES 1 & 2 37

38 HOSE ASSEMBLY (61" DECK) Series 2 38 NZMJ SERIES 1 & 2

39 HOSE ASSEMBLY (61" DECK) Series 2 Item Part No Qty Description Note FILTER HEAD BRACKET, Filter FILTER SCREW, 5/16-18 x 5/8 Hex Washer Self-Tap 5A MOTOR, Hydraulic, Left Hand Includes Castle Nut & #502 Woodruff Key, 5/16 x 1 5B MOTOR, Hydraulic, Right Hand Includes Castle Nut & #502 Woodruff Key, 5/16 x BOLT, 1/2-13 x 6 Hex Head Cap, GR WASHER, 1/2 Split Lock NUT, 1/2-13 Hex GR B PLATE, Mounting BOLT, 1/2-13 x 1-1/2 Square Neck Carriage, GR NUT, 1/2-13 Hex Nyloc WELDMENT, Rear Crossbrace CONNECTOR, Straight Hydraulic (Parker # 8-10 F5OLO-S) BOLT, 1/2-13 x 3-3/4 Hex Head Cap HOSE, 15-1/2 Hydraulic (Parker # F436JCJ ) HOSE, 17-1/2 Hydraulic (Parker # F436BKJCJ ) WASHER,.531 I.D. Flat CONNECTOR, 90-Degree Hydraulic (Parker # 8-6 C5OLO-S) HOSE, 12-1/4 (Parker # R836BKJ9NR ) HOSE, 18-1/2 (Parker R836BKJCJ ) HOSE, 6-1/2 (Parker # R836BKJ9NR ) CONNECTOR, 45-Degree Hydraulic (Parker #8-6 V 50L0-S) CONNECTOR, Straight Hydraulic (Parker # 8-6 F5OLO-S) CONNECTOR, 45-Degree Hydraulic (Parker # V5OLO-S) SCREW, 1/4-20 x 1/2 Hex Head Cap, GR WASHER, 1/4 Split Lock PIN, 1/8 x 1-1/2 Cotter Footnotes: NOTE: Order for Hose and Connector Kit for 61 Deck. NZMJ SERIES 1 & 2 39

40 HYDRO RESERVOIR ASSEMBLY 40 NZMJ SERIES 1 & 2

41 HYDRO RESERVOIR ASSEMBLY Item Part No Qty Description Note ASSY, Hydraulic Tank (Incl. tank, p/n & 3 items shown below) CAP, Vented Kelch p/n H4550D GROMMET (Dapco #12078) was Snapper # FITTING, #8 Elbox (Dapco #12183) BRACKET, R.H. Hydro Tank Mount BRACKET, L.H. Hydro Tank Mount SCREW, 1/4-20 x 1 Hex Head Cap, GR 5 (or ) WASHER, 1/4 Flat SCREW, 5/16-18 x 5/8 Hex Washer Self-Tap NUT, 1/4-20 Hex Nyloc CABLE TIE, 7 Long not shown Footnotes: NZMJ SERIES 1 & 2 41

42 HYDRO IDLER ASSEMBLY 42 NZMJ SERIES 1 & 2

43 HYDRO IDLER ASSEMBLY Item Part No Qty Description Note NUT, 3/8-16 Hex Center Lock NUT, 3/8-16 Hex Flange Lock SPRING, Extension SCREW, 3/8-16 x 1-1/2 Hex Head Cap, GR ADJUSTER, Chain (5/16-18 Thread) HAIR PIN, 3/32 x 1-1/ WASHER, 3/8 Flat SAE SWIVEL, Adjustable SPACER,.340 I.D. x.63 O.D. x.310 Thick NUT, 5/16-18 Hex, GR 5 or B NUT, 5/16-18 Hex Nyloc WASHER, 9/16 Flat Series 1 only NUT, 3/8-24 Hex Nyloc Series 1 only BUSHING, 9/16 I.D. Series 1 only 15A WELDMENT, Idler Arm Series 1 only 15B WELDMENT, Idler Arm Series 2 only FITTING, 3/16 Straight Lube Series 1 only PIN, Idler Arm (3/8-24 Thread) Series 1 only PIN, 1/8 x 3/4 Cotter Series 1 only 19A PULLEY, Flat Idler 4.12 (Backside Idler) Series 1 only 19B PULLEY, 4 O.D. x.391 I.D. x 1.25 Backside Idler Series 2 only SCREW, 3/8-16 x 1-3/4 Hex Head Cap, GR 5 Series 1 only BELT, Hydro Drive (HA Section, 47.5 Effective Length) qty. 1 for Series SET, Matched Traction Drive Belts Series 2 (Kit contains two belts (p/n ) EYEBOLT, 5/16-18 Series 2; may be used instead of BOSS, Idler Arm Pivot Series 2 only SLEEVE BUSHING, 3/4 I.D. Series 2 only BOLT, 3/8-16 x 3-1/2 Hex Head, GR 5 Series 2 only NUT, 3/8-16 Hex, GR 5 or B Series 2 only WASHER, 3/8 Split Lock Series 2 only WASHER, 3/8 Flat SAE Series 2 only SCREW, 3/8-16 x 2-1/4 Hex Head Cap, GR 5 Series 2 only WASHER,.468 x 1.85 x.25 Series 2 only Footnotes: NZMJ SERIES 1 & 2 43

44 ENGINE SUB-ASSEMBLY 44 NZMJ SERIES 1 & 2

45 ENGINE SUB-ASSEMBLY Item Part No Qty Description Note 1 ** 1 ENGINE, 23HP Kohler (Model CV730S, Spec. PS-CV ) 1 ** 1 ENGINE, 25HP Kohler (Model CV730S, Spec. PS-CV ) SCREW, 5/16-18 x 1-1/2 Hex Head Cap, GR RETAINER, 3/8 Bolt NUT, 5/16-18 Hex Top Lock, GR B ASSEMBLY, Oil Valve 6A KEY, 1/4 Square x 1-1/4 Long used on Series 1 Models 6B KEY, 1/4 Square x 1 Long used on Series 2 Models 7A PULLEY, Engine, Hydro Drive used on NZMJ23521KH Model 7B PULLEY, Engine, Hydro Drive used on NZMJ25611KH Model 7C PULLEY, Engine (Double) used on Series 2 Models CLUTCH, Electric (Ogura GT-2) used on NZMJ23521KH Model CLUTCH, Electric (Ogura GT-2.5) used on NZMJ25611KH & both Series 2 Models WASHER, Rectangular Steel BUMPER, Electric Clutch SCREW, 5/16-18 x 1-1/4 Hex Head Cap, GR WASHER,.468 x 1.85 x.25 Flat WASHER, 7/16 Split Lock 14A SCREW, 7/16-20 x 3 Hex Head Cap GR 5 (w/nyloc Patch) used on Series 1 Models 14B SCREW, 7/16-20 x 2-1/2 Hex Head Cap, GR 5 (w/nyloc Patch) used on Series 2 Models BRACKET, Clutch BOLT, 3/8-16 x 1 Square Neck Carriage, GR NUT, 3/8-16 Hex Nyloc KEY, 1/4 Square x 2-1/4 Long RETAINER, 5/16 Bolt 20A SPACER, Ogura Clutch used on Series 1 Models 20B SPACER, Clutch used on Series 2 Models WASHER, 5/16 Flat OUTLET, Muffler SCREW, # 8-18 x 1/2 Hex Washer Head Self-Tap NUT, M8 x 1.25 Hex used on NZMJ23522KH only (not shown) WASHER, 5/16 Split Lock used on NZMJ23522KH only (not shown) Footnotes: **See your local Kohler distributor for engine service parts. NZMJ SERIES 1 & 2 45

46 SEAT ASSEMBLY 46 NZMJ SERIES 1 & 2

47 SEAT ASSEMBLY Item Part No Qty Description Note SEAT ASSY (Seats, Inc. p/n 907 EVC order parts from ) SPRING, Compression- Seat Support SCREW, 5/16-18 x 3/4 Hex Washer Self-Tap WASHER, 3/8 Flat NUT, 3/8-16 Nyloc SEAT PAN CROSSMEMBER, Seat WELDMENT, Hinge Bracket SHOULDER BOLT, 5/ NUT, 5/16-18 Large Flange Hex Center Lock BOLT, 3/8-16 x 1 Square Neck Carriage, GR GUARD, Fan KNOB, 1/4-20 x 3/4 Thread WELL-NUT, 1/4-20 x 53/ SCREW, 5/16-18 x 5/8 Hex Washer Self-Tap CLIP, Open J 3/8 Cushioned LATCH, Seat WASHER, 5/16 Flat NUT, 5/16-18 Hex Nyloc SPRING, Extension SCREW, 5/16-18 x 2 Hex Head Cap, GR SPACER,.340 I.D.x.63 O.D. x.310 Thick BUSHING, Seat SPACER SPRING, Compression HOLDER, Seat Switch SWITCH, Seat, NC DECAL, Warning DECAL, Oil Reservoir Overfill Warning (Incl. angle brackets, seat pan, cushions, armrests, adjusters & seat switch) Footnotes: NZMJ SERIES 1 & 2 47

48 MUFFLER GUARD ASSEMBLY 48 NZMJ SERIES 1 & 2

49 MUFFLER GUARD ASSEMBLY Item Part No Qty Description Note UPPER BRACKET, Muffler Guard MOUNT, Lower Muffler Guard GUARD, Muffler (Back Plate) REAR BRACE, Muffler Guard GUARD, Muffler NUT, 3/8-16 Nyloc BOLT, 3/8-16 x 1 Square Neck Carriage, GR BOLT, 3/8-16 x 3/4 Square Neck Carriage NUT, 3/8-16 Hex Center Lock Footnotes: NZMJ SERIES 1 & 2 49

50 52" CUTTING DECK ASSEMBLY PT.1 50 NZMJ SERIES 1 & 2

51 52" CUTTING DECK ASSEMBLY PT.1 Item Part No Qty Description Note WELDMENT, 52 Deck SCREW, 3/8-16 x 2 Hex Head Cap, GR WELDMENT Pivot Pin SCREW, 3/8-16 x 1 Hex Head Cap, GR NUT, 3/8-16 Hex Nyloc ROLLER Low Density Polyethylene WASHER, 5/8 Flat SAE GAUGE WHEEL, Polyethylene BOLT, 3/8-16 x 1 Square Neck Carriage, GR NUT, 1/2-13 Hex, GR B SCREW, 1/2-13 x 2 Hex Head Cap, GR BOLT, 1/2-13 x 3-3/4 Hex Head Cap, GR NUT, 1/2-13 Hex Light Nyloc ASSEMBLY, Pusher Bar (Includes items 15-17) WELDMENT, Pusher Bar SLEEVE - Suspension BUSHING - Suspension ASSEMBLY, Chain & Eyebolt (see Front Frame Assy page) also shown on FRONT FRAME ASSY Pt. 2 page (item 63) BRACKET, Front Deck Hanger R. H BRACKET, Front Deck Hanger L. H BOLT, 1/2-13 x 5 Hex Head SPACER, Gauge Wheel WASHER,.406 x 1.50 x.120 Flat NUT, 3/8-16 Hex Flange Lock WHEEL BRACKET Front Right WHEEL BRACKET Front Left Footnotes: NZMJ SERIES 1 & 2 51

52 52" CUTTING DECK ASSEMBLY PT.2 52 NZMJ SERIES 1 & 2

53 52" CUTTING DECK ASSEMBLY PT.2 Item Part No Qty Description Note SCREW, 5/16-18 x 5/8 Hex Washer Self-Tap BELT COVER, Left Hand BELT COVER, Right Hand SCREW, 3/8-16 x 1 Hex Head Cap, GR ASSEMBLY, Idler (see breakdown on Idler Assy page) *V-BELT, Secondary- 52 (HB Section, effective length) *BELT, Primary (HB Section, effective length) SPRING, Idler (1.17 O.D. x 7.5 long) SPRING, Idler Primary (1.25 O.D. x 10 long) SPRING, Chute PIN, 3/32 x 1 Cotter PIN, Chute Hinge NUT, 3/8-16 Hex Nyloc ASSEMBLY, Spindle (see breakdown on Deck Spindle Assy page) ASSEMBLY, Center Spindle (see breakdown on Deck Spindle Assy page) 16A WELDMENT, 52 Chute Deflector (Series 1) 16B ASSY, Discharge Chute, 52 Deck (Series 2) incl. items 10, 11, 12, 17, 19 & DEFLECTOR BOTTOM (52 Deck) BOLT, 3/8-16 x 1-1/4 Square Neck Carriage, GR CHUTE, Rubber (52 Deck) WELDMENT, 52 Discharge Chute Footnotes: *NOTE: Snapper part number stamped on belt NZMJ SERIES 1 & 2 53

54 61" CUTTING DECK ASSEMBLY PT.1 54 NZMJ SERIES 1 & 2

55 61" CUTTING DECK ASSEMBLY PT.1 Item Part No Qty Description Note WELDMENT, 61 Deck SCREW, 3/8-16 x 2 Hex Head Cap, GR WELDMENT Pivot Pin SCREW, 3/8-16 x 1 Hex Head Cap, GR NUT, 3/8-16 Hex Nyloc ROLLER, Low Density Polyethylene WASHER, 5/8 Flat SAE GAUGE WHEEL, Polyethylene BOLT, 3/8-16 x 1 Square Neck Carriage, GR NUT, 1/2-13 Hex Light Nyloc SCREW, 1/2-13 x 2 Hex Head Cap, GR BOLT, 1/2-13 x 3-3/4 Hex Head Cap, GR ASSEMBLY, Pusher Bar (Includes items 14-16) WELDMENT, Pusher Bar SLEEVE - Suspension BUSHING - Suspension BRACKET, Deck Lift, Right Hand BRACKET, Deck Lift, Left Hand BOLT, 1/2-13 x 5 Hex Head WASHER,.406 x 1.50 x.120 Flat NUT, 3/8-16 Hex Flange Lock WHEEL BRACKET, Front Right WHEEL BRACKET, Front Left SPACER, Gauge Wheel BRACKET, Deck Lift, RH Rear BRACKET, Deck Lift, LH Rear Footnotes: NZMJ SERIES 1 & 2 55

56 61" CUTTING DECK ASSEMBLY PT.2 56 NZMJ SERIES 1 & 2

57 61" CUTTING DECK ASSEMBLY PT.2 Item Part No Qty Description Note SCREW, 5/16-18 x 5/8 Hex Washer Self-Tap BELT COVER ASSEMBLY, Idler (see breakdown on Idler Assy page) SCREW, 3/8-16 x 1 Hex Head Cap, GR *BELT, Primary (HB Section, effective length) Series 1 only *BELT, Primary (HB Section, 94.2 effective length) Series 2 only *V-BELT, Secondary- 61 (HB Section, effective length) SPRING, Idler (1.17 O.D. x 7.5 long) SPRING, Idler Primary (.90 O.D. x 10 long) Series 1 only SPRING, Idler Primary (1.25 O.D. x 10 long) Series 2 only SPRING, Chute PIN, 3/32 x 1 Cotter PIN, Chute Hinge NUT, 3/8-16 Hex Nyloc ASSEMBLY, Spindle (see breakdown on Deck Spindle Assy page) ASSEMBLY, Center Spindle (see breakdown on Deck Spindle Assy page) 15A WELDMENT, 61 Chute Deflector (Series 1) 15B -- 1 ASSEMBLY, Discharge Chute, 61 Deck (Series 2) incl. items 10, 11, 12, 17, 19 & DEFLECTOR BOTTOM (61 Deck) BOLT, 3/8-16 x 1-1/4 Square Neck Carriage, GR CHUTE, Rubber (61 Deck) WELDMENT, 61 Discharge Chute Footnotes: *NOTE: Snapper part number stamped on belt NZMJ SERIES 1 & 2 57

58 IDLER ASSEMBLIES ( ) 58 NZMJ SERIES 1 & 2

59 IDLER ASSEMBLIES ( ) Item Part No Qty Description Note WELDMENT, Idler Plate ASSEMBLY, Primary Idler Includes items 6 (2), 7, 8 (3), 9, 10, 11, 12, 13 & ASSEMBLY, Secondary Idler Includes items 6 (2), 7, 8, 9, 15, 16 & BUSHING, 1 Machine RING, 1 External Retaining BUSHING, Idler (Powdered Metal) LUBE FITTING, 3/ WASHER, 3/8 Flat NUT, 3/8-16 Hex Center Lock, GR 5 or B SCREW, 3/8-16 x 3-1/4 Hex Head Cap, GR WELDMENT, Primary Idler Arm BUSHING - Idler RETAINER, Idler Belt PULLEY, Flat Idler SCREW, 3/8-16 x 1-3/4 Hex Head Cap, GR WELDMENT, Secondary Idler Arm PULLEY, Idler Footnotes: NZMJ SERIES 1 & 2 59

60 DECK SPINDLE ASSEMBLIES 60 NZMJ SERIES 1 & 2

61 DECK SPINDLE ASSEMBLIES Item Part No Qty Description Note SUB-ASSEMBLY, Spindle (Incl.the 8 items below) SPACER, Bearing *RING, Spindle Retaining VENT, Spindle (Alemite # ) BALL BEARING (2 per item 1, sub-assembly) ASSEMBLY, Spindle Housing (includes items 4 & 8) BOLT, Ribbed (3/8-16 x 1-1/4 Thread) (6 per item 1, subassembly) FITTING, Lube (1/4-28 Special Thread Forming) Alemite #3038-B SHAFT, Spindle SPACER, Blade PULLEY, 5.75 Diameter NUT, 3/8-16 Hex Nyloc (6 per spindle assembly) WASHER, Beveled PULLEY, Driven (52 Deck only) PULLEY, Driven (61 Deck only) BLADE, 18 Commercial w/extra Cut (52 Deck only) replaces BLADE, 21 (61 Deck only) was BOLT, 5/8-11 x 7-1/2 Hex, Grade NUT, 5/8-11 Hex Flange Lock, GR WASHER, Spindle *SEAL, Nylos *WASHER Footnotes: *NOTE: For Bearing Pre-Seal Kit (63240) installation, discard 3 & replace with 19 & 20. NZMJ SERIES 1 & 2 61

62 DECALS 62 NZMJ SERIES 1 & 2

63 DECALS Item Part No Qty Description Note DECAL, Snapper Pro DECAL, Warning (CPSC Cut-Finger) DECAL, SNAPPER (14.56 long) DECAL, SNAPPER (8.0 long) DECAL, Oil Reservoir Overfill Warning DECAL, Caution (Spring Mechanism) DECAL, Control Panel replaces DECAL, Danger (High Speed Rotating Parts) DECAL, Fuse DECAL, Park Brake DECAL, Detent DECAL, 23HP Kohler Engine DECAL, Ear Protection DECAL, Danger, Guard/Catcher DECAL, Tank Selector DECAL, Lever Control DECAL, 52 Deck (silver) DECAL, 61 Deck (silver) Footnotes: NZMJ SERIES 1 & 2 63

64 CONTROL PANEL ASSEMBLY 64 NZMJ SERIES 1 & 2

65 CONTROL PANEL ASSEMBLY Item Part No Qty Description Note CONTROL PANEL CONTROL LEVER, Throttle/Choke CONTROL CABLE, Throttle STRAP, Tether CONTROL CABLE, Choke SCREW, 5/16-18 x 5/8 Hex Washer Self-Tap SCREW, #10-32 x 5/8 Hex Washer Self-Tap Note: These items are also shown on the Electrical Components page NUT, #10-32 Nyloc Note: These items are also shown on the Electrical Components page SWITCH, PTO, Yellow Note: These items are also shown on the Electrical Components page SWITCH, Ignition Note: These items are also shown on the Electrical Components page HOUR METER w/flash Alerts Note: These items are also shown on the Electrical Components page. Footnotes: NZMJ SERIES 1 & 2 65

66 ELECTRICAL COMPONENTS (except wiring) 66 NZMJ SERIES 1 & 2

67 ELECTRICAL COMPONENTS (except wiring) Item Part No Qty Description Note SWITCH, Ignition CLIP, Harness KEY SET (not shown) SWITCH, DP NO/NC Snap-In SWITCH, Seat, NC shown also on Seat Assembly page CLIP, Open J 3/8 Cushioned shown on Rear Frame & Tank Bracket page & Seat Assembly page SCREW, 1/4-20 x 5/8 Hex Head w/loose captured washer SWITCH, PTO, Yellow HOUR METER w/2 Flash Alerts Sendec Corp. Model No BATTERY, 12V - Wet, 11 Plate 375CCA replaces SCREW, 1/4-20 x 5/8 Hex Head Cap, GR WASHER, 9/32 I.D. x 5/8 O.D. Flat NUT, 1/4-20 Hex Center Lock, GR 5 or B BRACKET, Battery Hold-Down SCREW, #10-32 x 5/8 Hex Washer Self-Tap NUT, #10-32 Hex Nyloc CABLE TIE, 7 long Footnotes: NZMJ SERIES 1 & 2 67

68 WIRING HARNESS 68 NZMJ SERIES 1 & 2

69 WIRING HARNESS Item Part No Qty Description Note HARNESS, Wiring (Kohler) CABLE, Battery- Positive (6 Gage, 34 long) (not shown) CABLE, Battery- Ground (6 Gage/14 Gage, 23 long) (not shown) CABLE, Solenoid to Starter (6 Gage, 10 long) (not shown) Series 1 only WIRE, Solenoid- Ground (10 Gage, 6-1/2 long) (not shown) Series 1 only Footnotes: NZMJ SERIES 1 & 2 69

70 WIRING SCHEMATIC (Kohler Engines) 70 NZMJ SERIES 1 & 2

71 WIRING SCHEMATIC (Kohler Engines) Item Part No Qty Description Note SCHEMATIC, Wiring, Kohler 23 & 25 HP Footnotes: NZMJ SERIES 1 & 2 71

72

73

74 Parts Manual for ZERO TURNING HYDRO DRIVE NZMJ SERIES 1 & 2 IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY. McDonough, GA, U.S.A. COPYRIGHT 2005 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision 3, 7/11/2005