21" STEEL DECK WALK BEHIND MOWERS SERIES 17

Size: px

Start display at page:

Download "21" STEEL DECK WALK BEHIND MOWERS SERIES 17"

Melissa Griffin
6 years ago
Views:

Parts Manual for 21" STEEL DECK WALK BEHIND MOWERS SERIES 17 PUSH MODELS 216517B 2167517BV R215517HC R2167517BV PROPELLED MODELS P215517HC P216517B P2167517BV P2167517BVE P217017BV P217017BVE

1 Parts Manual for 21" STEEL DECK WALK BEHIND MOWERS SERIES 17 PUSH MODELS B BV R215517HC R BV PROPELLED MODELS P215517HC P216517B P BV P BVE P217017BV P217017BVE RP215517HC RP BV RP217017BV RP BVE RP217017BVE WP BV WP216517BV WRP216517BE FRP BV EP BV EP217017BV ERP BV ERP217017BV EFRP BV WRPS216517B WRPS216517BE McDonough, GA, U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision 4, 1/16/2006 Manual No

3 Table Of Contents PAGE GROUP 4 HANDLES & CONTROLS 8 CUTTING DECK, BLADES 12 FRONT WHEEL BRACKET 14 SWIVEL CASTER ASSEMBLY 16 REAR WHEEL BRACKETS, LATCHES 18 FRONT WHEELS 20 FRONT WHEELS - SWIVEL MODEL 22 REAR WHEELS 24 DRIVE SYSTEM SELF-PROPELLED PT.1 28 TRANSMISSION (DIFFERENTIAL) 30 THROTTLE CONTROLS 32 KIT, MUFFLER DEFLECTOR 34 ENGINE SPECIFICATIONS 36 SIDE CHUTE, ADAPTER 38 GRASS BAG ACCESSORY 40 DECALS PT DECALS PT SNAPPERIZER ACCESSORY 46 THATCHERIZER ACCESSORY 48 RECYCLING KITS ACCESSORY 50 ELECTRIC START COMPONENTS 52 WIRING SCHEMATIC 21" STEEL DECK WALK BEHIND MOWERS SERIES 17 3 Manual No

4 HANDLES & CONTROLS Manual No " STEEL DECK WALK BEHIND MOWERS 4 SERIES 17

5 HANDLES & CONTROLS Item Part No Qty Description Note HANDLE, Upper Was (used on Push Models) HANDLE, Upper used on Self-Propelled HANDLE, Middle used on All HANDLE, Lower Left Hand used on All HANDLE, Lower Right Hand used on All BAIL, Blade Control used on All CLIP, Blade Control used on 2002 Models & Earlier CLIP, Blade Control used on 2003 Models & Later CABLE, Blade Control (49-1/4 long) used on 2002 Models & Earlier CABLE, Blade Control (46-15/16 long) used on 2003 Models & Later CABLE, Blade Control (49 long) used on Honda 2003 Models & Later HANDLE, Wheel Drive used on Self-Propelled GRIP, Wheel Drive Handle used on Self-Propelled GRIP, Wheel Drive Handle used on European Models CABLE, Clutch Pull (Z-Bend, 38-5/8 long) used on Self-Propelled COVER, Vinyl used on Self-Propelled SPRING, Clutch used on Self-Propelled SECTOR, Speed used on all other Self-Propelled models WIRE TIE, 1.29 Long (Black) used on Self-Propelled SPRING, Speed Control used on Self-Propelled WASHER, 3/8 Flat used on Self-Propelled GRIP, Speed Control Handle used on all other Self-Propelled models ANCHOR, Speed Control used on all other Self-Propelled models GUIDE, Lower V-Belt used on Self-Propelled ROD, Transfer used on Self-Propelled 20A ASSEMBLY, Transfer Rod used on European Models CLIP, Transfer Rod 1/4 used on Self-Propelled TEE-NUT, 5/16-18 used on Self-Propelled BUSHING, Differential used on Self-Propelled BOLT, 5/16-18 x 3/4 Hex Flange Lock GR5 used on All SCREW, 5/16-24 x 1 Hex Head Cap GR5 used on All BOLT, 5/16-18 x 5/8 Short Neck Carriage GR5 Was (used on All) NUT, 5/16-18 Hex Flange Lock GR5 Was (used on All) NUT, 5/16-24 Hex Center Lock GR5 Was (used on All) CLIP, Cable/Wiring used on All SCREW, 5/16-18 x 1-7/8 Curved Head GR2 Was (used on All) T-KNOB, 5/16-18 (BLACK) used on All Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES 17 5 Manual No

6 HANDLES & CONTROLS Manual No " STEEL DECK WALK BEHIND MOWERS 6 SERIES 17

7 HANDLES & CONTROLS Item Part No Qty Description Note SCREW, 1/4-20 x 1-1/2 Hex Head Cap GR5 used on All WASHER, 1/4 Internal Tooth Lock Was (used on All) NUT, 1/4-20 Hex GR5 or B Was (used on All) SCREW, 1/4-20 x 2 Hex Head Cap GR5 used on All BUSHING used on All PIN, 1/4 x 1-1/2 (for clutch handle) used on Self-Propelled PUSH-NUT, 1/4 (for handle pin) used on Self-Propelled DECAL, Blade Control (Left Hand Side) used on all (except Euro) DECAL, Blade Control (Left Hand Side) used on European DECAL, Handle International Warning used on European GUIDE, Rope used on All FOAM GRIP,.84 I.D. x 11 long Was FOAM GRIP,.84 I.D. x 12 long DECAL, Speed Select used on Self-Propelled (except Euro) DECAL, Speed Select (Euro) used on Self-Propelled (Euro) CLAMP, Casing used on All WASHER, 5/16 Internal Tooth Lock used on All SCREW, 5/16-24 x 1-1/2 Round Hd. Machine, GR5 used on All GUIDE, Rope used on All LEVER, Speed Control used on Self-Propelled GUIDE, Rope used on Self-Propelled NUT, 1/4-20 Hex GR5 or B used on Self-Propelled CABLE-TIE, 7 used on Self-Propelled SCREW, #10-32 x 5/8 Hex Head Self-Tap used on All SCREW, 1/4-20 x 1-1/2 Hex Head Cap, GR5 used on Self-Propelled WIRE TIE, 11 Long (Black) used on Self-Propelled SCREW, 1/4-20 x 2 Hex Head Cap GR5 used on Self-Propelled CLAMP, 7/8 Double Cable used on Self-Propelled CONTROL, Swivel Wheel Lock Cable 56.5" used on Swivel Wheel Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES 17 7 Manual No

8 CUTTING DECK, BLADES Manual No " STEEL DECK WALK BEHIND MOWERS 8 SERIES 17

9 CUTTING DECK, BLADES Item Part No Qty Description Note DECK, 21 Mower ( HV deck w/decals) DECK, 21 Mower (Baffle Type deck w/decals) used on FRP & EFRP Air Models only DECK, 21 Mower ( M deck w/decals) DECK, 21 Mower (Swivvel wheel "M" deck w/o decals) NUT, 5/16-18 Hex Flange Lock, GR5 Was BOLT, 5/16-18 x 1/2 Short Neck Carriage GR BOLT, 5/16-18 x 1-1/8 Short Neck Carriage GR SCREW, 3/8-16 x 1 Self-Tap (engine mounting screws) PLUG, Hole SCREW, 5/16-18 x 1/2 Hex Head Cap, GR5 used on Euro models BOLT, 5/16-18 x 2-1/4 Hex Flange Lock used on Euro models BUSHING used on Euro models COVER, Belt used on Euro models WASHER, 7/16 Flat used on Euro models SCREW, 3/8-24 x 1-3/4 Hex Head Cap GR WASHER, 3/8 I.D. Cone BLADE, Cutter (European) used on Euro models 14A BLADE, Cutter (Mulching) 14B BLADE, Cutter (Standard Lift) 14C BLADE, 21 Ninja (Quad Edge) HUB, Blade Drive 25mm used on Briggs Models HUB, Blade Drive 7/8 used on Honda Models KEY, Woodruff # 605 used on Briggs Models KEY, Hi-Pro #HP506 used on Briggs Models KEY, Woodruff #505 Hi-Pro used on Honda Models SCREW, 5/16-18 x 5/16 Hex Socket Set PULLEY, Engine (25mm I.D. x 2-1/8 O.D.) used on Briggs Models PULLEY, Engine (7/8 I.D. x 2-1/8 O.D.) used on Honda Models WASHER, 7/16 Flat WELDMENT, Fender used on Euro models BOLT, 5/16-18 x 3/4 Short Neck Carriage GR5 Was (only one shown) RETAINER, 5/16 Bolt (only one shown) NUT, 5/16-18 Hex Flange Lock, GR5 Was KIT, Air Lift (Includes 4 items below) LIFT, Air WASHER, 5/16 Internal Tooth Lock NUT, 5/16-24 Hex, GR5 Was Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES 17 9 Manual No

10 CUTTING DECK, BLADES Manual No " STEEL DECK WALK BEHIND MOWERS 10 SERIES 17

11 CUTTING DECK, BLADES Item Part No Qty Description Note SCREW, 5/16-24 x 21/32 Machine NUT, 5/16-18 Hex Center Lock DECAL, Front Baffle BAFFLE, Front used on FRP & EFRP Air Models only DECAL, Front Baffle BOLT, 5/16-18 x 3/4 Carriage, GR WASHER, 5/16 Internal/External Tooth Lock WINGNUT, 5/16-18 Nyloc WASHER, 5/16 Flat SPACER, 1/16 Thick, Blade Hub BAFFLE, Belt PLUG, 5/16 Square Hole used on Push only PLUG, 5/16 Round Hole Qty 3 on Push; Qty 2 on Self- Propelled SCREW, 1/4-20 x 1/2 Hex Washer Self-Tap Was DECAL, Warning Chute/Deflector Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES Manual No

12 FRONT WHEEL BRACKET Manual No " STEEL DECK WALK BEHIND MOWERS 12 SERIES 17

13 FRONT WHEEL BRACKET Item Part No Qty Description Note ASSEMBLY, Right Wheel Arm (Consists of items 2, 3, 4, 5A & 6) ASSEMBLY, Left Wheel Arm (Consists of items 2, 3, 4, 5B & 6) BOLT, 5/16-18 Hex Washer Face Shoulder LATCH, Height GRIP, Latch 5A ARM, Right Wheel (Round Hole) 5B ARM, Left Wheel (Square Hole) not shown RETAINER, 5/16 Bolt (Black) NUT, 5/16-18 Hex Flange Lock Was WELDMENT, Front Wheel Bracket Was 41770, Used on 2002 Model Year and Earlier WELDMENT, Front Wheel Bracket used on 2003 Model Year and Later AXLE Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES Manual No

14 SWIVEL CASTER ASSEMBLY Manual No " STEEL DECK WALK BEHIND MOWERS 14 SERIES 17

15 SWIVEL CASTER ASSEMBLY Item Part No Qty Description Note WELDMENT, Front Bracket SCREW, 1/4-20 x 1-1/2 Hex Cap NUT, 1/4-20 Hex Lock BRACKET, Swivel Lock SPRING, Torsion BOLT, 1/4-20 x 2 Hex WASHER, 41/64 Flat Was BUSHING, 5/8 Nylon LUBE FITTING, Straight (press-fit for.187 dia. Hole) NUT, 1/4-20 Hex Lock PIN, 1/4 x 1-3/4 Roll WELDMENT, L.H. Swivel Bracket WELDMENT, R.H. Swivel Bracket Was (Not Shown) CONTROL, Swivel Wheel Lock Cable 56.5 Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES Manual No

16 REAR WHEEL BRACKETS, LATCHES Manual No " STEEL DECK WALK BEHIND MOWERS 16 SERIES 17

17 REAR WHEEL BRACKETS, LATCHES Item Part No Qty Description Note BALL BEARING, 9/16 I.D SCREW, #10-32 x 3/8 Hex Washer Self-Tap (Torx) LATCH, Height Adjusting (Long) NUT, 1/4-20 Hex Was NUT, 5/16-18 Hex Flange Lock, GR5 Was ASSEMBLY, Wheel Arm, Right Rear (Round hole) used on Push models (Incl. items 3, 10, 14, 15 & 16) ASSEMBLY, Wheel Arm, Left Rear (Square hole) used on Push models (Incl. items 3, 11, 14, 15 & 16) ASSEMBLY, Wheel Arm (Right Rear) Was (Self-Propelled models)(incl. 1, 2, 3, 12, 14, 15 & 16) ASSEMBLY, Wheel Arm (Left Rear) Was (Self-Propelled Models)(Includes 1, 2, 3, 13, 15, & 16) ARM, Round Axle End, Right Rear (Round hole) used on Push models ARM, Square Axle End, Left Rear (Square hole) used on Push models ARM, Wheel, Right Rear used on Self-Propelled models ARM, Wheel, Left Rear used on Self-Propelled models BOLT, 5/16-18 x 1 Shoulder RETAINER, 5/16 Bolt GRIP, Latch BRACKET, Right Rear Wheel BRACKET, Left Rear Wheel AXLE Rear axle on Push Models; Front axle on All Models GUARD, Rear Foot used on Push models GUARD, Rear Foot used on Self-Propelled models (except European) GUARD, Rear Foot used on Euro Self-Propelled models RING, Split (Black) used on Self-Propelled models SUPPORT, Foot Guard used on Self-Propelled models BOLT, 1/4-20 x 1/2 Short Neck Carriage GR5 Was (used on Self- Propelled models) WASHER, 1/4 Internal Tooth Lock Was BOLT, 5/16-18 x 1/2 Short Neck Carriage GR5 Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES Manual No

18 FRONT WHEELS Manual No " STEEL DECK WALK BEHIND MOWERS 18 SERIES 17

19 FRONT WHEELS Item Part No Qty Description Note WHEEL, 8 x 1.75 Plastic used on 2002 Model Year and Earlier WHEEL, 8 x 1.75 Plastic used on 2003 Model Year and Later NUT, 7/16-20 Hex Center Lock Jam (thin) BUSHING, Axle WASHER, 7/16 x 1 O.D. Flat Qty. of (2) for Push; Qty. of (1) for Self-Propelled Models PLUG, Wheel Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES Manual No

20 FRONT WHEELS - SWIVEL MODEL Manual No " STEEL DECK WALK BEHIND MOWERS 20 SERIES 17

21 FRONT WHEELS - SWIVEL MODEL Item Part No Qty Description Note PIN, Wheel - Stepped.435 DIA x Long PIN, Swivel Wheel Lock WHEEL, 8 x 1.75 Plastic - Gray Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES Manual No

22 REAR WHEELS Manual No " STEEL DECK WALK BEHIND MOWERS 22 SERIES 17

23 REAR WHEELS Item Part No Qty Description Note 1A WHEEL, 10 x 1.75 Plastic (Push Models) used on 2002 Model Year and Earlier 1B WHEEL, 10 x 1.75 Plastic (Push Models) used on 2003 Model Year and Later 2A WHEEL, 10 x 1.75 Plastic (Self-Propelled Models) used on 2002 Model Year and Earlier 2B WHEEL, 10 x 1.75 Plastic (Self-Propelled Models) used on 2003 Model Year and Later NUT, 7/16-20 Hex Center Lock Jam BUSHING, Axle WASHER, 7/16 x 1 O.D. Flat PLUG, Wheel Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES Manual No

24 DRIVE SYSTEM SELF-PROPELLED PT.1 Manual No " STEEL DECK WALK BEHIND MOWERS 24 SERIES 17

25 DRIVE SYSTEM SELF-PROPELLED PT.1 Item Part No Qty Description Note BELT, Poly-Vee LINK, Differential ASSEMBLY, Clutch Idler (includes items 3 thru 7) ARM, Clutch Idler PULLEY, Idler SCREW, 1/4-28 x 1-3/8 Hex Head Cap GR NUT, 1/4-28 Hex Top Lock BUSHING, 3/8 Plastic SHAFT, Hex Drive PULLEY, Poly-V, 2 O.D. Non Commercial Models WASHER, 3/8 Flat SPRING, Torsion STUD, Idler (3/8-24 thread) HOLDER, Bearing (Inner Half) BEARING, Ball,.38 I.D. Spherical O.D O-RING NUT, 3/8-24 Hex Center Lock GR5 or B HOLDER, Bearing (Outer Half) CLIP, 1/4 Right Arc (Transfer Rod) ROD, Transfer used on Non-Euro models BELT, Engine Drive 3L (Stretch) used on Self-Propelled PLATE, Thrust RING, 5/8 External Retaining used on Self-Propelled BALL BEARING, 3/4 I.D. used on Self-Propelled SCREW, #10-32 x 1/4 Self-Tap Machine SHIELD, Hex Shaft used on Self-Propelled Euro only ASSEMBLY, Transfer Rod (Incl. items 26, 27 & 28) used on Self-Propelled Euro only BALL JOINT, 1/4-28 used on Self-Propelled Euro only NUT, 1/4-28 Hex GR5 used on Self-Propelled Euro only LINK, Transfer used on Self-Propelled Euro only WASHER, 3/4 Shim WASHER, 3/8 Internal Tooth Lock WASHER, 3/8 Flat NUT, 3/8-24 Hex, GR B NUT, 5/16-18 Hex GR5 or B Was (continued on next page) WASHER, 5/16 Split Lock BOLT, 5/16-18 x 3/4 Short Neck Carriage GR5 Was Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES Manual No

26 DRIVE SYSTEM SELF-PROPELLED PT.1 Manual No " STEEL DECK WALK BEHIND MOWERS 26 SERIES 17

27 DRIVE SYSTEM SELF-PROPELLED PT.1 Item Part No Qty Description Note CONNECTOR, Transfer Rod WASHER, Flat 1/4" used on Self-Propelled Euro only BUSHING DISC, Driven (Cantilever) WASHER, 1/4 Internal Tooth Lock used on Self-Propelled Euro RETAINER, 3/8 Bolt SPRING, Wheel Drive BOLT, 5/16-18 x 5/8 Short Neck Carriage GR5 Was ASSEMBLY, Deck Bracket (Incl. items 44, 45 & 46) used on 2002 Models & Earlier BRACKET, Deck BRACKET, Deck (Incl. item 7) used on 2003 Models & Later BUSHING, lange Plastic SPACER used on Commercial models SCREW, 5/16-18 x 1/2 Hex Head Cap, GR WASHER, 5/16 Internal Tooth Lock WASHER, Spring PIN, 3/32 x 1/2 Cotter Was SCREW, 1/4-20 x 1/2 Hex Washer Self-Tap Was BOLT, 5/16-18 x 1/2 Short Neck Carriage GR NUT, 5/16-18 Hex Flange Lock, GR5 Was SPRING, Clutch GUIDE, Thrust Plate (3/8-24 thread) KIT, Drive Disc Assembly comprised of (disc), (nut), & (bushings) Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES Manual No

28 TRANSMISSION (DIFFERENTIAL) Manual No " STEEL DECK WALK BEHIND MOWERS 28 SERIES 17

29 TRANSMISSION (DIFFERENTIAL) Item Part No Qty Description Note ASSEMBLY, Transmission Was (Includes 1 thru 30) NUT, 5/16-24 Hex Lock, GR C Was WASHER, Cone PULLEY, Poly-Vee Belt WASHER, Spring only 1 shown ASSEMBLY, Right Housing (Includes items 6, 7, 8, 9 & 10) HOUSING, Right Side SCREW, 5/16-24 x 1-1/8 Rib Neck, GR SEAL, 5/8 Internal Dia BEARING, Tapered- (Differential Housing) BEARING, Ball,.437 I.D. x O.D. x.375 Thk. Was PLUG, Housing GEAR, Input AXLE, Short GEAR, Differential (46 tooth) PLATE, 46T Gear WASHER, Thrust, 3/4 I.D SCREW, #10-32 x 1-1/2 Hex Head Cap GR5 only 1 shown GASKET, Housing WASHER, 5/16 Internal/External Tooth Lock only 1 shown BRACKET, Differential SCREW, 1/4-20 x 1-1/4 Hex Washer Self-Tap only 1 shown SPACER, Axle Gear AXLE, Long GEAR, Pinion (12 tooth) SPACER, Pinion Gear SHAFT, Pinion NUT, #10-32 Hex Nyloc only 1 shown ASSEMBLY, Left Housing (Includes items 8, 9 & 29) HOUSING, Left GASKET, 5/8 O. D Grease (32 oz.) Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES Manual No

30 THROTTLE CONTROLS Manual No " STEEL DECK WALK BEHIND MOWERS 30 SERIES 17

31 THROTTLE CONTROLS Item Part No Qty Description Note CONTROL, Throttle (48 long) used on Briggs 4 Cycle CONTROL, Throttle (46 long) used on Honda 4 Cycle CONTROL, Throttle (46-3/16 long) used on Honda 4 Cycle CONTROL, Throttle (49-13/16 long) used on Briggs 4 Cycle Footnotes: Measure cable on mower before ordering. 21" STEEL DECK WALK BEHIND MOWERS SERIES Manual No

32 KIT, MUFFLER DEFLECTOR Manual No " STEEL DECK WALK BEHIND MOWERS 32 SERIES 17

33 KIT, MUFFLER DEFLECTOR Item Part No Qty Description Note KIT, Muffler Deflector (Includes below 3 items) used on Honda Model DEFLECTOR, Comp. Muffler Honda # ZL CAP, Muffler Honda # ZL SCREW, Tapping Honda # ZE1-000 Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES Manual No

34 ENGINE SPECIFICATIONS Manual No " STEEL DECK WALK BEHIND MOWERS 34 SERIES 17

35 ENGINE SPECIFICATIONS Item Part No Qty Description Note ENGINE, 5.5 HP Honda, Recoil Model GCV160A1A; Type ENGINE, 6.5 HP B&S, Recoil Model 123K02; Type 0124-E ENGINE, 6.75 HP B&S, Recoil Model ; Type 0113-E ENGINE, 6.75 HP B&S, Recoil Model ; Type 0116-E ENGINE, 6.75 HP B&S, Electric Start Model ; Type 0115-E ENGINE, 6.75 HP B&S, Recoil Model ; Type 0117-E ENGINE, 6.75 HP B&S, Recoil Model ; Type 0118-E ENGINE, 7 HP B&S, Electric Start Model ; Type 0113-E ENGINE, 7 HP B&S, Recoil Model ; Type 0149-E ENGINE, 7 HP B&S, Recoil Model ; Type 0112-E1 Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES Manual No

36 SIDE CHUTE, ADAPTER Manual No " STEEL DECK WALK BEHIND MOWERS 36 SERIES 17

37 SIDE CHUTE, ADAPTER Item Part No Qty Description Note ASSY, Bag Adapter & Cover (Incl 8 items below) used on European Models Only ADAPTER, Grass Bag COVER, Bag Adapter HINGE, Chute Cover BOLT, 1/4-20 x 1/2 Short Neck Carriage GR WASHER, 1/4 Internal Tooth Lock Was NUT, 1/4-20 Hex Was STOP, Cover MOLDING, Trim 10A ADAPTER, Grass Bag 10B ASSEMBLY, Grass Bag Adapter SPACER,.316 I.D. x.375 O.D. x.310 thick NUT, 5/16-18 Hex Large Flange Center Lock RETAINER, 5/16 Bolt BOLT, 5/16-18 x 3/4 Short Neck Carriage GR5 Was CHUTE, Side WASHER, 3/8" Flat Was WING-NUT, 5/16-18 Nyloc COVER, 21 Deck NUT, 5/16-18 Hex Large Flange Center Lock Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES Manual No

38 GRASS BAG ACCESSORY Manual No " STEEL DECK WALK BEHIND MOWERS 38 SERIES 17

39 GRASS BAG ACCESSORY Item Part No Qty Description Note KIT, Grass Bag Catcher Was (Includes 2 thru 5) ASSEMBLY, Grass Bag (Includes 2 thru 4) Was A BAG, Door Type (Black w/gold Letters) (12 Wide) 2B BAG, Door Type (Black w/gray Letters) (12 Wide) NOTE: Bag assembly is composed of items 2B, 3 & ASSEMBLY, Bag Wire (12 Wide) CONNECTOR, Grass Bag (weldment) ADAPTER, Bag for Euro Bag Adapter ass'y see SIDE CHUTE ADAPTER page ASSEMBLY, Grass Bag Adapter (Includes items 7 thru 14) ADAPTER, Bag BRACKET, Rope Pulley SCREW, 5/16-18 x 1-1/4 Pan Head Machine BUSHING, Flange PULLEY, Plastic NUT, 5/16-18 Hex Flange Lock GR5 Was WASHER, 15/32 Flat RIVET, 3/16 x PLUG, Chute Adapter Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES Manual No

40 DECALS PT. 1 Manual No " STEEL DECK WALK BEHIND MOWERS 40 SERIES 17

41 DECALS PT. 1 Item Part No Qty Description Note DECAL, Blade Control DECAL, Speed Select used on Self-Propelled models DECAL, Danger, Cut Finger DECAL, Spark Plug International Symbol DECAL, Noise (European) DECAL, 2001 Year of Manufacture not shown DECAL, 2002 Year of Manufacture not shown DECAL, 2003 Year of Manufacture shown DECAL, Patent Numbers DECAL, Warning (Euro) DECAL, Warning DECAL, Euro Community (CE) DECAL, Deck/Chute (European) DECAL, Deck Warning DECAL, Warning Chute/Deflector DECAL, Front Baffle used on FRP & EFRP Air Models only Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES Manual No

42 DECALS PT. 2 Manual No " STEEL DECK WALK BEHIND MOWERS 42 SERIES 17

43 DECALS PT. 2 Item Part No Qty Description Note DECAL, Caution Symbols DECAL, Medallion DECAL, OPEI DECAL, SNAPPER (Commercial) gold letters/red border/black background DECAL, SNAPPER gray letters/red border/black background DECAL, Shift Warning used on Self-Propelled models DECAL, Caution Tag not used in 2003 model year DECAL, Ninja DECAL, Hi-Vac Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES Manual No

44 SNAPPERIZER ACCESSORY Manual No " STEEL DECK WALK BEHIND MOWERS 44 SERIES 17

45 SNAPPERIZER ACCESSORY Item Part No Qty Description Note KIT, Snapperizer (Incl. items 1 & 2 thru 5) used on Hi-Vac Rolled Under- Lip Decks) KIT, Snapperizer (Incl. items 1 & 2A thru 5) used on FR Type Decks SCREEN, Fastener Assembly RING, Bottom (21.77 Inside Diameter) 2A RING, Bottom (22.60 Inside Diameter) NUT, 5/16-24 Hex, GR5 Was 90223, only 1 shown WASHER, 5/16 Split Lock only 1 shown SPRING only 1 shown Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES Manual No

46 THATCHERIZER ACCESSORY Manual No " STEEL DECK WALK BEHIND MOWERS 46 SERIES 17

47 THATCHERIZER ACCESSORY Item Part No Qty Description Note KIT, Thatcherizer (Incl. items 1 thru 27) LATCH, Frame Attachment 2A BAR, Mount (Right Hand) 2B BAR, Mount (Left Hand) ROD, Tine SUPPORT, Wheel TRAY, Tine KIT, Tine Thatching Spring Was BUSHING, Wheel Adjuster AXLE, Wheel WHEEL, 7.00 x 1.50 Gage NUT, 1/4-20 Hex Top Lock Was (only 9 shown) WASHER, 1/4 Flat Was SPRING, Compression BOLT, 1/4-20 x 1-1/4 Hex, GR NUT, 1/4-20 Hex, GR5 Was CAP, Vinyl BOLT, 1/4-20 x 2-1/2 Square Neck Carriage only 1 shown BOLT, 5/16-18 x 1 Square Neck Carriage, GR5 Was (only 1 shown) BOLT, 1/4-20 x 3/4 Square Neck Carriage, GR5 Was WASHER, Reinforcing only 1 shown WASHER, 5/16 Split Lock only 1 shown NUT, 5/16-18 Hex, GR5 Was (only 1 shown) NUT, 1/2 Push BEARING, Nyliner SCREW, 5/16-18 x 1/4 Set WASHER, 1/2 Flat DECAL, Adjustment DECAL, Thatcherizer Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES Manual No

48 RECYCLING KITS ACCESSORY Manual No " STEEL DECK WALK BEHIND MOWERS 48 SERIES 17

49 RECYCLING KITS ACCESSORY Item Part No Qty Description Note KIT, Recycling Cover (Includes the 2 items below) for 4HP & above engines KIT, Recycling Plug (Incl. items 1 & 2 below) for 4HP & above engines COVER, 21 Deck PLUG, Chute Adapter BLADE, 21 Quad Edge Ninja Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES Manual No

50 ELECTRIC START COMPONENTS Manual No " STEEL DECK WALK BEHIND MOWERS 50 SERIES 17

51 ELECTRIC START COMPONENTS Item Part No Qty Description Note KIT, Battery (Includes 4 items below) BATTERY, 12 Volt, 35 CCA Was HARNESS, Battery SCREW, #10-24 x 1/2 Pan Head Machine NUT, #10-24 Square ASSEMBLY, Switch/Bracket (Incl items 5 thru 10) KEY (Set of Two) BEZEL (Seal & Face Nut) BRACKET, Ignition Switch COVER, Switch NUT, 5/8-32 Hex Lock SWITCH, Ignition (spring loaded ON/OFF 2 prong) SPACER WASHER, 1/4 Internal Tooth Lock Was NUT, 1/4-28 Hex, GR5 or B Was HARNESS, Wiring BRACKET, Battery COVER, Battery BOLT, 5/16-18 x 1/2 Short Neck Carriage GR NUT, 5/16-18 Hex Flange Lock, GR5 Was CLIP, Wiring CHARGER, Battery (120 Volt; 60 Hertz) Was CHARGER, Battery (230 Volt; 50 Hertz) BOLT, 5/16-18 x 5/8 Short Neck Carriage GR5 Was RETAINER, 5/16 Bolt SCREW, 1/4-28 x 1-3/8 Hex Head Cap GR5 Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES Manual No

52 WIRING SCHEMATIC Manual No " STEEL DECK WALK BEHIND MOWERS 52 SERIES 17

53 WIRING SCHEMATIC Item Part No Qty Description Note WIRING SCHEMATIC FOR BRIGGS & STRATTON ELECTRIC STARE ENGINE Footnotes: 21" STEEL DECK WALK BEHIND MOWERS SERIES Manual No

Parts Manual for 21" STEEL DECK WALK BEHIND MOWERS SERIES 17 IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO.

56 Parts Manual for 21" STEEL DECK WALK BEHIND MOWERS SERIES 17 IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY. McDonough, GA, U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision 4, 1/16/2006 Manual No

21" STEEL DECK WALK BEHIND MOWER "MR" SERIES 17

21 STEEL DECK WALK BEHIND MOWER MR SERIES 17 Parts Manual for 21" STEEL DECK WALK BEHIND MOWER "MR" SERIES 17 PUSH MODELS MR216017B MR216017BV WMR216017B WMR216017BV WMR216517B PROPELLED MODELS MRP216017B MRP216017BV MRP216517B WMRP216017B WMRP216517B