Parts Manual for 21" STEEL DECK EASY LINE WALK MOWER SERIES 0 & 1 PUSH MODELS PROPELLED MODELS

Size: px

Start display at page:

Download "Parts Manual for 21" STEEL DECK EASY LINE WALK MOWER SERIES 0 & 1 PUSH MODELS PROPELLED MODELS"

Rebecca Griffith
5 years ago
Views:

Parts Manual for 21" STEEL DECK EASY LINE WALK MOWER SERIES 0 & 1 PUSH MODELS PROPELLED MODELS S21 (7800003) SP21 (7800004) S211 (7800089) SP211 (7800090) S211 (7800166) SP211 (7800167) SPV21

1 Parts Manual for 21" STEEL DECK EASY LINE WALK MOWER SERIES 0 & 1 PUSH MODELS PROPELLED MODELS S21 ( ) SP21 ( ) S211 ( ) SP211 ( ) S211 ( ) SP211 ( ) SPV21 ( ) SPV211 ( ) SPV211 ( ) SPV211E ( ) SPV21E ( ) SPV21E1 ( ) McDonough, GA, U.S.A. Briggs & Startton Yard Power Products Group Copyright 2007 Briggs & Startton Corporation Milwaukee, WI USA. All Rights Reserved Revision 3, 7/18/2007 Manual No

3 Table Of Contents PAGE GROUP 4 HANDLES & CONTROLS 8 GUARDS AND COVERS 10 FRONT WHEELS 12 REAR WHEELS (Push) 14 REAR WHEELS (Self-Propelled) 16 REAR DECK BRACKETS & IDLER ARM 18 TRANSMISSION 20 ENGINE AND BLADE 22 BAGGING COMPONENTS 24 DECALS 26 WIRING SCHEMATIC 21" STEEL DECK EASY LINE SERIES 0 & 1 3 Manual No

4 HANDLES & CONTROLS Manual No " STEEL DECK EASY LINE 4 SERIES 0 & 1

5 HANDLES & CONTROLS Item Part No Qty Description Note 1A HANDLE, Upper, Flat 1B HANDLE, Upper, 22 Push * PLATE, Control Panel * SCREW, #8-16 Recessed Pan Head (Torxplus) GUIDE, Rope (1/4-20 threads) NUT, 1/4-20 Hex Nyloc WASHER, 5/16 Internal Tooth Lock KNOB, 5/16-18 Wing (Black) 7 M KNOB, 5/16-18 Wing (Black) Briggs part 8A ASS'Y, Control Head, Variable Speed (Incl. items 8-12, 15 & 16) 8B ASS'Y, Control Head, Single Speed (Incl. items 8, 10, 12 & 15) * CASE HALF, Bottom, Black ** SPRING STEEL * CLUTCH LEVER, Silver ** ASS'Y., Speed Lever/Friction Material (Snapper) includes , Friction Strip * CASE HALF, Top, Variable Speed- Black * CASE HALF, Top, Single Speed- Black 13A BAIL, Brake (self-propelled mower) 13B BAIL, 22 (push-mower) CABLE, Zone Control CABLE, Zone Control used on SPV21E * CABLE, Clutch ** CABLE, Speed HANDLE, Lower WIRE TIE, 11 Inch Black Nylon BOLT, 5/16-18 x 2 Curved Head Square Neck GR BRACKET, Lower Handle, Black Textured BOLT, Carriage 5/16-18 x 1-1/2, GR BOLT, Carriage 5/16-18 x 5/8, GR NUT, 5/16-18 Hex Flange Lock, GR HOUSING, Snap-On E-Start SWITCH, Electric Start (Start/Run) NUT, 5/8-32 E-Start CAP, E-Start KEY, Ignition (Pair) PUSHNUT, 3/ WIRING HARNESS, B&S Footnotes: Note: * Used on self-propelled models only Note: ** Used on variable speed models only Note: Items 8 thru 12 are not available as individual parts. 21" STEEL DECK EASY LINE SERIES 0 & 1 5 Manual No

6 HANDLES & CONTROLS Manual No " STEEL DECK EASY LINE 6 SERIES 0 & 1

7 HANDLES & CONTROLS Item Part No Qty Description Note FOAM GRIP, 7 Footnotes: Note: * Used on self-propelled models only Note: ** Used on variable speed models only Note: Items 8 thru 12 are not available as individual parts. 21" STEEL DECK EASY LINE SERIES 0 & 1 7 Manual No

8 GUARDS AND COVERS Manual No " STEEL DECK EASY LINE 8 SERIES 0 & 1

9 GUARDS AND COVERS Item Part No Qty Description Note WELDMENT, 21 Deck, 7 Position REAR COVER, Belt/Transmission SCREW, 7mm x 1 x.550 AB Point replaces rivet PLUG, Hole (Polyethylene) ROD, Trail Shield 1/4-20 thread- both ends SHIELD, Trail NUT, 1/4-20 Hex Flange Lock BOLT, 5/16-18 x 3/4 Short Square Neck Carriage, GR BOLT RETAINER, 5/16- Black 10A COVER, Mulching, No Tools 10B COVER, 21 Deck Recycling KNOB, Fluted (5/16-18 thread) or SPACER,.316 x.375 x.300/ NUT, 5/16-18 Large Flange Hex Center Lock NUT, 5/16-18 Hex Flange Lock BOLT, 5/16-18 x 5/8 Short Square Neck Carriage, GR 5 modified shoulder WELDMENT, Hinge Pivot SPRING, Torsion, Mulching Cover PUSHNUT, 3/ WASHER, 5/16 Internal/External CHUTE, 21 Side Discharge NUT, 5/16-18 Speed Shakeproof# FN ) Footnotes: 21" STEEL DECK EASY LINE SERIES 0 & 1 9 Manual No

10 FRONT WHEELS Manual No " STEEL DECK EASY LINE 10 SERIES 0 & 1

11 FRONT WHEELS Item Part No Qty Description Note AXLE, Front, Low Cost Walk Mower, ASSEMBLY Front Wheel Arm, LH ASSEMBLY Front Wheel Arm, RH NUT, 5/16-18 Hex Flange Lock WASHER, Shim,.875 x.531 x.060 6A WHEEL, Front, 8 x 2, LS Tread, 1-5/8 Hub x.50 I.D. 6A WHEEL, Front, 8 x 2, LS Tread, 1-5/8 Hub x.50 I.D. Snapper Tri-spoke Eurowheel 6B WHEEL, Front, 8 x 2, Double Bar II Tread, 1-5/8 Hub w/bushing Euro rim GRIP, Height Latch replaces (voided) COTTER, Hairpin HUB CAP, 1-3/8 Dia. black FRONT WHEEL ARM, L.H. (Square Hole) FRONT WHEEL ARM, R.H. (Round Hole) SHOULDER BOLT, 5/ BOLT RETAINER, 5/16- Black HEIGHT LATCH V21 Footnotes: 21" STEEL DECK EASY LINE SERIES 0 & 1 11 Manual No

12 REAR WHEELS (Push) Manual No " STEEL DECK EASY LINE 12 SERIES 0 & 1

13 REAR WHEELS (Push) Item Part No Qty Description Note 1A WHEEL, 9 x 2, LS Tread, w/1-5/8 Hub, Gray 1B ASSY., 9 x 2 Gear Wheel, Double Bar II Tread & Nylon Bushing includes nylon bushing (p/n ) WASHER, 1/2 Flat COTTER, Hairpin 4A HUB CAP, 1-3/8 Diameter (black) used with wheel 1A 4B HUB CAP, 3-1/4 Diameter (black) used with wheel 1B ASSEMBLY, Axle Arm, Left Rear ASSEMBLY, Axle Arm, Right Rear GRIP, Height Latch replaces (voided) HOUSING, Axle Bearing SNAP RING, 1-3/8 Truarc BOLT, 1/4-20 x 3/4 Hex Flange Lock Footnotes: 21" STEEL DECK EASY LINE SERIES 0 & 1 13 Manual No

14 REAR WHEELS (Self-Propelled) Manual No " STEEL DECK EASY LINE 14 SERIES 0 & 1

15 REAR WHEELS (Self-Propelled) Item Part No Qty Description Note 1A ASSEMBLY, 9 x 2 Gear Wheel, LS Tread w/powdered metal bushing 1A ASSEMBLY, 9 x 2 Gear Wheel, LS Tread w/nylon bushing 1B ASSEMBLY, 9 x 2 Gear Wheel, Double Bar II Tread w/nylon bushing 2A BUSHING, Wheel (powdered metal) part of item B BUSHING, Wheel (nylon) part of item RETAINING RING Waldes PINION, LH Drive PINION, RH Drive SEAL, Pinion (Felt) RETAINER, Pinion Seal WASHER,.531 x 1.25 x.06 thick replaces SHIELD, Dust SNAP RING, 1-3/8 Truarc O-RING, Buna N, BOLT, 1/4-20 x 3/4 Hex Flange Lock ASSEMBLY, Axle Arm, Left Rear ASSEMBLY, Axle Arm, Right Rear GRIP, Height Latch replaces (voided) O-RING, Buna N, WASHER, 1/2 Flat COTTER, Hairpin HUB CAP, 3-1/4 Diameter (black) * CHARGER, Battery 120V/12V * ADAPTER, Charger * SCREW, #10-24 x 1/2 Pan Head Machine included with battery * WIRING HARNESS, Battery included with battery * BATTERY, 12V Sealed Lead Acid includes , battery harness * NUT, #10-24 Square included with battery * SCREW 1/4-20 x 4 Hex Head Cap, GR * NUT, 1/4-20 Hex Flange Lock * BRACKET, Battery * NUT, 1/4-20 Hex Nyloc PAWL, 3/16 O.D ASSEMBLY, Axle Bearing includes items 32 & HOUSING, Axle Bearing BALL BEARING, Axle.50 I.D. x O.D. x.3125 thick * SCREW, 1/4-20 x 1-1/2 Hex Washer Self Tap Footnotes: Note: * Used on electric start model only. 21" STEEL DECK EASY LINE SERIES 0 & 1 15 Manual No

16 REAR DECK BRACKETS & IDLER ARM Manual No " STEEL DECK EASY LINE 16 SERIES 0 & 1

17 REAR DECK BRACKETS & IDLER ARM Item Part No Qty Description Note SCREW, 5/16-18 x 2 Hex Head Cap, GR SCREW, 1/4-20 x 2-1/4 Hex Head Cap, GR NUT, 5/16-18 Hex Flange Lock BOLT, 5/16-18 x 5/8 Round Head Short Square Neck Carriage 5A BRACKET, Transmission Mounting 5B BRACKET, Transmission Mounting SPACER, 3/8 x 13/16 x 5/ NUT, 1/4-20 Hex Top Lock Flange NUT, 3/8-16 Hex Flange Lock WASHER, 13/32 x 1-1/2 x 1/8 Flat IDLER ARM, Belt Drive BELT GUIDE, Idler PULLEY, Flat Idler, Plastic replaces BOLT, 3/8-16 X 1-1/2 Hex Flange Lock, GR SPACER, Pivot, Belt Idler SPACER, Idler SHIELD, Debris BOLT, 3/8-16 x 2-1/4 Short Square Neck Carriage, GR 5 Footnotes: 21" STEEL DECK EASY LINE SERIES 0 & 1 17 Manual No

18 TRANSMISSION Manual No " STEEL DECK EASY LINE 18 SERIES 0 & 1

19 TRANSMISSION Item Part No Qty Description Note 1A TRANSMISSION, LC Walk, Single Speed includes pulley ( ) 1B TRANSMISSION, LC Walk, Variable Speed includes pulley ( ) PULLEY, Transmission, Single Speed Low Cost Walk PULLEY, Transmission, Variable Speed Low Cost Walk NUT, 3/8-16 Hex Center Lock Jam WASHER,.390 I.D BELT GUIDE, Variable Speed (1/4-20 threads) NUT, 1/4-20 Hex Top Lock Flange, GR B BELT, 3L, Traction Drive Nominal O.D SCREW, 7mm x 1 x.550 AB Point SPRING, Clutch Return Footnotes: 21" STEEL DECK EASY LINE SERIES 0 & 1 19 Manual No

20 ENGINE AND BLADE Manual No " STEEL DECK EASY LINE 20 SERIES 0 & 1

21 ENGINE AND BLADE Item Part No Qty Description Note * ENGINE, 6.5 B&S Quantum Model 123K E * ENGINE, 6.5 B&S Quantum Model 124T E1 (was 123K020141E1) * ENGINE, 6.5 B&S Quantum, ES Model 124T E1 (was 123K070153E1) * ENGINE, 6.5 B&S Quantum 650 Series 124T B1 49 state compliant SCREW, 3/8-16 x 1 Hex Washer Self-Tap SCREW, 3/8-16 x 2 Hex Washer Self-Tap GUIDE, Belt not used on push model SPACER, Belt Guide PULLEY, Engine not used on push model KEY, Hi-Pro (# HP-506) SET SCREW, 5/16-18 x 1/2 Hex Recess Type A Point (Cup Point) HUB, Blade Drive, 25 MM I.D BLADE, Wave, 21 Steel Deck WASHER, Cone SCREW, 3/8-24 x 2 Hex Head Cap, GR 5 Footnotes: Note: * Purchase engine parts from engine manufacturer dealer. 21" STEEL DECK EASY LINE SERIES 0 & 1 21 Manual No

22 BAGGING COMPONENTS Manual No " STEEL DECK EASY LINE 22 SERIES 0 & 1

23 BAGGING COMPONENTS Item Part No Qty Description Note BAG ASSEMBLY (Door) includes items 2 thru GRASS BAG (Door w/silver letters) CONNECTOR, Bag (weldment) ASSEMBLY, Bag Wire (12 ) 21S WASHER, 5/16 Internal/External SCREW, 5/16-18 x 1-1/4 Pan Head Machine BRACKET, Rope Pulley NUT, 5/16-18 Hex Flange Lock, GR WASHER, 15/32 Flat RIVET BUSHING, Flange,.381 x.625 x BOLT, 5/16-18 x 3/4 Short Square Neck Carriage, GR BOLT RETAINER, 5/16- Black SPACER,.316 x.375 x.300/ NUT, 5/16-18 Large Flange Hex Center Lock SCREW, 5/16-18 x 5/8 Cross Recess Pan Head ADAPTER, Bag KNOB, Fluted (5/16-18 thread) or PULLEY, Nylon ASSEMBLY, Bag Adapter NUT, 5/16-18 Speed Shakeproof# FN ) Footnotes: 21" STEEL DECK EASY LINE SERIES 0 & 1 23 Manual No

24 DECALS Manual No " STEEL DECK EASY LINE 24 SERIES 0 & 1

25 DECALS Item Part No Qty Description Note DECAL, SNAPPER, Steel Decks 2A DECAL, Control Head, Variable Speed 2B DECAL, Control Head, Single Speed DECAL, Danger, Cut Finger DECAL, OPC Bail International Symbol DECAL, Warning (Deck) DECAL, Warning DECAL, Chute/Deflector DECAL, Warning/Danger WBM DECAL, OPEI Walk/Ride not shown; not a service part DECAL, Patent Numbers not shown; not a service part Footnotes: 21" STEEL DECK EASY LINE SERIES 0 & 1 25 Manual No

26 WIRING SCHEMATIC Manual No " STEEL DECK EASY LINE 26 SERIES 0 & 1

27 WIRING SCHEMATIC Item Part No Qty Description Note Wiring Schematic for Harness # Footnotes: 21" STEEL DECK EASY LINE SERIES 0 & 1 27 Manual No

Parts Manual for 21" STEEL DECK EASY LINE WALK MOWER SERIES 0 & 1 IT IS THE POLICY OF BRIGGS & STRATTON CORP TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO.

30 Parts Manual for 21" STEEL DECK EASY LINE WALK MOWER SERIES 0 & 1 IT IS THE POLICY OF BRIGGS & STRATTON CORP TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS McDonough, GA, U.S.A. Briggs & Startton Yard Power Products Group Copyright 2007 Briggs & Startton Corporation Milwaukee, WI USA. All Rights Reserved Revision 3, 7/18/2007 Manual No

21" STEEL DECK EASY LINE EUROPEAN WALK MOWER

21 STEEL DECK EASY LINE EUROPEAN WALK MOWER Parts Manual for 21" STEEL DECK EASY LINE EUROPEAN WALK MOWER MODEL ESPV21 ESPV211 McDonough, GA, 30253 U.S.A. Briggs & Startton Yard Power Products Group Copyright 2007 Briggs & Startton Corporation Milwaukee,