PARTS MANUAL. Version MINIMAG SERIES. R.P.S. Corporation Phone: P.O. Box 241 Fax: Racine, Wisconsin 53401

Transcription

1 Version PARTS MANUAL MINIMAG SERIES R.P.S. Corporation Phone: P.O. Box 241 Fax: Racine, Wisconsin 3401

2

3 Table of Contents TOC Soap Choices...4 Actuator Lift Assembly...6 Tank Assembly... Tank Assembly...10 Tank Baffl e Assembly...12 Vac Motor Assembly...13 Frame Assembly-Traction Drive...14 Tall Frame Assembly - Traction Drive...16 Frame Assembly-Brush Drive...1 Frame Assembly-Brush Drive...20 Tank Lid Assembly...22 Squeegee Suspension...24 Control Panel-Brush Drive...26 Control Panel-Brush Drive...2 Control Panel-Traction Drive...30 Control Panel-Traction Drive Inch Squeegee Assembly Inch Squeegee Assembly...36 Shroud Assembly Inch Shroud Assembly Inch Shroud Assembly...40 Disk Deck-Brush Drive...42 Disk Deck-Traction Drive Inch Disk Deck-Brush Drive Inch Disk Deck-Traction Drive Inch Disk Deck-Traction Drive Inch Disk Deck-Traction Drive Inch EDGE Deck Inch EDGE Deck Inch Disk Jaws... Cylindrical Door Assembly...60 Cylindrical Deck Assembly...62 Vac Wand Kit...0 Electric Squeegee Lift...1 Battery Packs...2 SUDS System...4 Common wear parts...6 Suggest parts inventory...

4 4 Soap Choices Industrial Commercial Environmentally Safe TRADITIONAL DRUMS / TOTES DEMO / RENTAL QUARTS WALL-MOUNTED SUPERCON ONBOARD AUTO DISPENSING 4 MiniMag Parts Manual V

5 Soap Choices Onboard Availability SUDS Approved SUDS Approved SUDS Approved FORMULAS 0 Citrus Green 33 Low ph High Power An environmentally cleaner that works! It is a solvent free degreaser that works on oil, carbon, even rubber marks. Incorporates the latest technology in Green Cleaning. Safe on most surfaces not harmed by water alone. Low scale formula to prevent alkali buildup in cleaning equipment, while offer detergent to emulsify oil. Ideal solvent fortified degreaser. This butyl based detergent is penetrating, fast acting, and deep cleaning with built-in corrosion inhibitors. It is our most effective degreaser. SUDS Approved Gloss A high gloss detergent designed to dry to a bright shine. It is ideal for use on finished surfaces, tile, epoxy, or enamel. The special formula removes salt residue, scuff marks and dirt, while leaving no residue behind. The result is a clean, non-slip surface, ready for immediate use. SUDS Approved 9 HD The Heavy Duty concentrate is a Super alkaline detergent, formulated for heavy soil, grease, and thick buildup. Popular in machine shops, auto and truck repair, and other facilities with oil, hydraulic fluids and cutting oils. **Below Sold in bulk concentrate only. Not available as a SuperCon, PowerDose or SUDS product. 2 Pretreat** 44 Tough Stuff** Designed to quickly remove tire marks, oil stains and buildup that has accumulated. This pretreat uses the powerful cleaning of natural citrus extract and is intended to be used directly on the floor at 100% concentrate. Ideal for applications with Hard Water problems. It is safe to use in pressure washers and automatic scrubbers. The formulation enhances soil suspension, digests oil and grease, while supporting extra water conditioner. Distributed by: PowerCat P.O. Box 03 Racine, WI Phone: Fax: PowerCat, LLC, 200. MiniMag Parts Manual V

6 6 Actuator Lift Assembly MiniMag Parts Manual V

7 Actuator Lift Assembly Item Part Number Part Description Qty ACTUATOR ARM ACTUATOR ANCHOR /" ID, 1/2" OD, 1/4" LG BEARING 2 4 H HCS 3/"- 24 X 2" SS 1 H-16 CLEVIS PIN, 3/" X 2-1/2" 2 6 H-032 HN 3/"- 24 SS 1 H-9644 SPRING, 4-1/" LG X 9/16" OD (42E) 2 H-RUE14 3/" RUE RING COTTER 2 MiniMag Parts Manual V

8 MiniMag Parts Manual V Tank Assembly

9 Tank Assembly 9 MiniMag Parts Manual V

10 10 Tank Assembly 16 A DETAIL B 24 F 1 DETAIL F DETAIL A DETAIL G B TANK GRANITE = P/N RED = P/N G C 14 DETAIL C DETAIL E 10 3 D E DETAIL D 10 MiniMag Parts Manual V

11 Tank Assembly 11 Item Part Number Part Description Qty " ID X 3.0" LG MW2 BLACK MG HOSE 1 W/1.0" ENLARGED CUFF ONE END ONLY BLACK HOSE, 1-1/2" ID X 1" LG WIRE REINF GRAY HOSE, 2" ID X 22" LG WIRE REINF SOLUTION FILL LID SCREEN SIGHT TUBE SQUEEGEE CABLE GUIDE DRAIN HOSE HOSE CAP SCREEN STRAINER, 4-1/4" LG " MNPT X 2.0" BARB, PVC " MNPT X 1.0" BARB, PVC ELBOW, MALE 1/2" NPT X 1/2" TUBE OD, GLASS 1 FILLED NYLON CLIP TANK BACK SPLASH LATCH CLAMP 1 9/16-2 1/2 " SS O-RING, #324, 1.3" X 1." X.210" BUNA-N CLAMP 9/16"- 1 1/16" SS 1 20 H CLAMP 3/4"- 1-3/4" SS 2 21 H-0001 HCS 1/4"-20 X 1/2 SS" 3 22 H-1063 LW 1/4" SS 2 23 H-194 #14 X 1" SELF TAPPING SCREW 2 24 H-236 PPH SMS # X 3/4" SS 2 M-346K6 1/2" MNPT X 3/4" BARB, BRASS 1 MiniMag Parts Manual V

12 12 Tank Baffl e Assembly 9 ONLY USE ON MACHINE WITH SERIAL NUMBER 19 AND HIGHER Item Part Number Part Description Qty BAFFLE SNAP GRIP CLAMP VAC SCREEN VAC BOX BALL FLOAT HOLDER 1 6 H-0 NYLOK #10-32 SS 2 H-060 NYLOK 1/4"- 20 SS 2 H-1013 FW 1/4 ID X / OD SS 2 9 H-26 FHP X 1" SS 2 10 H-4419 CB 1/4"- 20 X." SS 2 12 MiniMag Parts Manual V

13 Vac Motor Assembly Item Part Number Part Description Optional Qty VAC BOX VAC MOTOR GASKET VAC MOTOR, 3/4 HP, TANGENTAL LOADER VALVE 1 H-6200 CLAMP /"- 1-1/2" SS 1 6 H-060 NYLOK 1/4"- 20 SS 3 H-092 KN 1/4-20 S/S 6 H-1013 FNW 1/4" X /" SS 6 9 H-21 PPH #10-32 X 1/2" S/S 1 10 H-W /4-20 X " FT STUD S/S 3 11 M-90130A029.2" NEOPRENE WASHER 6 MiniMag Parts Manual V

14 14 Frame Assembly-Traction Drive CASTER RED GRAY SOLID GRAY SOFT 36 TO ORDER MOTOR ONLY USE P/N M TO ORDER HUBS USE P/N DRIVE TIRE OPTIONS: PNEUMATIC GRAY, P/N FOAM FILLED GRAY, P/N P BLACK, P/N FOR MACHINES STARTING WITH SERIAL # 12 AND HIGHER USE PART P/N FOR SOLID GRAY TIRES MiniMag Parts Manual V

15 Frame Assembly-Traction Drive 1 Item Part Part Description Qty Number MAINFRAME FRAME SUPPORT - LH FRAME SUPPORT - RH BOSS TRACTION SPACER SPACER " STROKE 24V ACTUATOR 40 LB LOAD AXLE MOUNT TRANSAXLE PARKING BRAKE (OPTIONAL) LATCH 2 12 H-0166 CLEVIS PIN 3/" x 3.00" 1 13 H-0163 CLEVIS PIN, 1/2" X 2-1/2" 1 14 H CB #10-32 X 1-1/4" SS 4 1 H-0003 HCS 1/4"-20 X 3/4" SS 2 16 H-0109 HCS 3/"- 16 X 1-1/2" SS 2 1 H-010 HN 1/4"- 20 SS 1 H-011 HN /16"- 1 SS 9 19 H-06 NYLOK #-32 SS 4 20 H-0 NYLOK #10-32 SS 6 21 H-060 NYLOK 1/4"- 20 SS 3 22 H-061 NYLOK /16" - 1 SS H-0923 KN #10-32 SS 4 24 H-101 FW /16 ID X 3/4 OD SS 2 H-101 FW 3/ ID X / OD SS 2 26 H-1063 LW 1/4" SS 2 H-106 LW /16" SS 9 2 H-106 LW 3/" SS 2 29 H-239 PPH #-32 X 1/2" S/S 4 30 H-2416 PPHMS #10-32 X 3/4" S/S 6 31 H-32 FHSCS 1/4-20 X 3/4" S/S 1 32 H-390 FHSCS /16"- 1 X 3/4" SS 2 33 H-3913 FHSCS /16"- 1 X 2-1/4" S/S 34 H-4429 CB /16"- 1 X 3/4" SS 3 H-4431 CB /16"- 1 X 1-1/4" SS 4 36 H-443 CB /16"- 1 X 3.0" SS 1 3 H-4463 CB /16"- 1 X 2-1/4" SS 1 3 H-940 RUBBER BUMPER, 2/32" 6 39 H-902 FW 3/" GRADE 4 40 H-RUE14 3/" RUE RING COTTER 1 41 H-RUE22 1/2" RUE RING COTTER 1 42 M-9434T2 3/4" DIA 1 HOLE TUBE STRAP 1 MiniMag Parts Manual V

16 16 Tall Frame Assembly - Traction Drive CASTER RED GRAY SOLID GRAY SOFT DRIVE TIRE OPTIONS: PNEUMATIC GRAY, P/N FOAM FILLED GRAY, P/N P BLACK, P/N MiniMag Parts Manual V

17 Tall Frame Assembly - Traction Drive 1 Item Part Part Description Qty Number FRAME SUPPORT BOSS TALL MINI MAG MAIN FRAME TRACTION SPACER SPACER " STROKE 24V ACTUATOR 40 LB LOAD AXLE MOUNT TRANSAXLE PARKING BRAKE (OPTIONAL) LATCH 2 11 H-0166 CLEVIS PIN 3/" x 3.00" 1 12 H-0163 CLEVIS PIN, 1/2" X 2-1/2" 1 13 H CB #10-32 X 1-1/4" SS 4 14 H-0003 HCS 1/4"-20 X 3/4" SS 2 1 H-0109 HCS 3/"- 16 X 1-1/2" SS 2 16 H-010 HN 1/4"- 20 SS 1 H-06 NYLOK #-32 SS 4 1 H-0 NYLOK #10-32 SS 6 19 H-060 NYLOK 1/4"- 20 SS 3 20 H-061 NYLOK /16" - 1 SS H-0923 KN #10-32 SS 4 22 H-101 FW /16 ID X 3/4 OD SS 23 H-101 FW 3/ ID X / OD SS 2 24 H-1063 LW 1/4" SS 2 H-106 LW 3/" SS 2 26 H-239 PPH #-32 X 1/2" S/S 4 2 H-2416 PPHMS #10-32 X 3/4" S/S 6 2 H-32 FHSCS 1/4-20 X 3/4" S/S 1 29 H-390 FHSCS /16"- 1 X 3/4" SS 2 30 H-3913 FHSCS /16"- 1 X 2-1/4" S/S 31 H-4429 CB /16"- 1 X 3/4" SS H-4431 CB /16"- 1 X 1-1/4" SS 4 33 H-443 CB /16"- 1 X 3.0" SS 1 34 H-940 RUBBER BUMPER, 2/32" 6 3 H-902 FW 3/" GRADE 4 36 H-RUE14 3/" RUE RING COTTER 1 3 H-RUE22 1/2" RUE RING COTTER 1 3 M-9434T2 3/4" DIA 1 HOLE TUBE STRAP 1 MiniMag Parts Manual V

18 1 Frame Assembly-Brush Drive MiniMag Parts Manual V

19 Frame Assembly-Brush Drive 19 Item Part Number Part Description Qty MAINFRAME FRAME SUPPORT - LH FRAME SUPPORT - RH BOSS LATCH 2 6 H-0109 HCS 3/"- 16 X 1-1/2" SS 2 H-011 HN /16"- 1 SS 1 H-06 NYLOK #-32 SS 4 9 H-0 NYLOK #10-32 SS 6 10 H-061 NYLOK /16" - 1 SS 11 H-101 FW 3/ ID X / OD SS 1 12 H-106 LW /16" SS 1 13 H-106 LW 3/" SS 2 14 H-239 PPH #-32 X 1/2" S/S 4 1 H-2416 PPHMS #10-32 X 3/4" S/S 6 16 H-390 FHSCS /16"- 1 X 3/4" SS 2 1 H-4429 CB /16"- 1 X 3/4" SS 1 H-4433 CB /16"- 1 X 2" SS 1 19 H-940 RUBBER BUMPER, 2/32" 6 20 H-902 FW 3/" GRADE 2 21 H-NJ0C JNYL /16"- 1 SS 1 MiniMag Parts Manual V

20 20 Frame Assembly-Brush Drive 3 4 DRIVE TIRE: P/N , P- GRAY P/N , P- BLACK FOR MACHINES WITH SERIAL # 12 AND HIGHER USE PART P/N FOR MACHINES USING WHEELS WITH P/N USE AXLE CASTER RED GRAY SOLID GRAY SOFT MiniMag Parts Manual V

21 Frame Assembly-Brush Drive 21 Item Part Number Part Description Qty AXLE A 3/4" SHAFT COLLAR 2 3 H-0023 FW 3/4 X 1 1/ X 1/32 SS 4 4 H-243 SSS CP /16" X 1/4" 2 H-601 SNAPRING 3/4" 4 6 H-0109 HCS 3/"- 16 X 1-1/2" SS 1 H-011 HN /16"- 1 SS 12 H-060 NYLOK 1/4"- 20 SS 9 H-101 FW 3/ ID X / OD SS 10 H-1063 LW 1/4" SS 4 11 H-106 LW /16" SS 4 12 H-32 FHSCS 1/4-20 X 3/4" S/S 3 13 H-390 FHSCS /16"- 1 X 1" SS 14 H /4-20 X 3/4" U-BOLT 2 1 M-9434T2 3/4" DIA 1 HOLE TUBE STRAP 3 MiniMag Parts Manual V

22 22 Tank Lid Assembly TANK LID STAINLESS STEEL - P/N GRANITE - P/N MiniMag Parts Manual V

23 Tank Lid Assembly 23 Item Part Number Part Description Qty TANK LID GASKET TANK CLEAR COVER GASKET VAC FORMED CLEAR COVER RECOVERY TANK CABLE, 20" " CONTINUOUS HINGE " LANYARD 2 H-309 /16-1 ACORN NUT 4 H-0 NYLOK #10-32 SS 4 9 H-101 FW 3/" X /" SS 1 10 H-106 LW /16" SS 1 11 H-194 #14 X 1" SELF TAPPING SCREW 6 12 H-21 PPH #10-32 X 1/2" S/S 4 13 H-3 BHSCS /16-1 X 1/2" 4 14 H-4429 CB /16"- 1 X 3/4" SS 1 1 H ID X.0 OD X.093 TH 2 NEOPRENE WASHER 16 H-N 0C NYL /16"- 1 SS 1 MiniMag Parts Manual V

24 MiniMag Parts Manual V Squeegee Suspension

25 Squeegee Suspension 2 MiniMag Parts Manual V

26 26 Control Panel-Brush Drive OPTIONAL LEFT ADJUSTABLE HANDLE BAR USE P/N RIGHT ADJUSTABLE HANDLE BAR USE P/N MiniMag Parts Manual V

27 Control Panel-Brush Drive 2 Item Part Number Part Description Options Qty CONTROL PANEL COVER CONTROL PANEL BOX, HD MINI MAG HD CONTROL PANEL STICKER RED WIRE, 16 GAGE, 12" LG YELLOW WIRE, 16 GAGE, 12" LG END CAP BRUSH PRESSURE GAUGE, 40 AMP BATTERY METER FUSE RESETTABLE 2 AMP FUSE, RESETTABLE, 40 AMP SWITCHBOARD INSULATOR EXPLOSION WARNING PLATE HOOK KEY SWITCH OPTIONAL A KEY SET (REPLACE) OPTIONAL TOGGLE, ON-OFF SPST OPTIONAL CONNECTOR, RED 0, HOUSING ONLY SWITCH, ROCKER, DPDT, ON/ON DETERGENT WARNING PLATE BUTTON COVER SWITCH MOUNT PLATE PUSH BUTTON SWITCH PLASTIC SWITCH NUT FUSE RESETTABLE 2 AMP SWITCH, ON-OFF ROCKER SPST 2 26 H /4" ID, 3/" OD, 3/" LG FLANGED BEARING, NYLON 1 2 H-00 DOME PLUG 1/2", BLK OPTIONAL 2 2 H-1032HCN HCN # H-10 HEAT SHRINK 2 30 H PROTECTIVE BOOT, TOGGLE SWITCH, (BLUE) OPTIONAL 1 31 H-4100 AB4-3A BLIND RIVET H-0001 HCS 1/4"-20 X 1/2 SS" 2 33 H-06 NYLOK #-32 SS 1 34 H-060 NYLOK 1/4"- 20 SS 4 3 H-0 HOLE PLUG 3/4" OPTIONAL 1 36 H-1009 FW #10 SS 4 3 H-1013 FW 1/4 ID X / OD SS 2 3 H-10 LW #, SS 2 39 H-1063 LW 1/4" SS 2 40 H-239 PPHMS #-32 X 1/2" SS 2 41 H-241 PPH #-32 X 1" S/S 1 42 H-234 PPH #10-32 X 3/4" S/S 4 43 H-33 BHSCS 1/4-20 X /" SS 4 44 H-4396 CB 1/4"- 20 X 1-3/4" SS 2 4 H-930K4 GROMMET, 1" ID X 1-3/4" OD BUNA-N 2 MiniMag Parts Manual V

28 2 Control Panel-Brush Drive MiniMag Parts Manual V

29 Control Panel-Brush Drive 29 Item Part Number Part Description Qty CONTROL PANEL BOX, HD SQUEEGEE LIFT LEVER RELAY, 24V, 0 AMP LIFT KNOB BRACKET, LIMIT SWITCH SPACER, 1-1/4" LG CIR. BREAKER - 1A, 24V LIMIT SWITCH 1 9 H FW 3/" X 3/4 NYLON 1 10 H-0002 HCS 1/4"-20 X /" SS 1 11 H-04 NYLOK #4-40 SS 2 12 H-061 NYLOK /16" - 1 SS 2 13 H-0923 KN #10-32 SS 4 14 H-092 KN 1/4-20 S/S 6 1 H-1004 FW 1/" X /16" SS 2 16 H-101 FW /16" X 3/4" SAE SS 1 1 H-1063 LW 1/4" SS 1 1 H-1212 FNW 1/4" X 1" SS 1 19 H-121 FNW /16" X 1-1/2" SS 2 20 H-2494 PPH #4-40 X 1" S/S 2 21 H-234 PPH #10-32 X 3/4" S/S 4 22 H-3 BHSCS 1/4-20 X 1-3/4" SS 4 23 H-441 CB 1/4"- 20 X." SS 24 H-4429 CB /16"- 1 X 3/4" SS 2 2 H-N 04C NYL 1/4" - 20 SS 1 MiniMag Parts Manual V

30 30 Control Panel-Traction Drive For machines prior to serial #004 use the following part numbers: K Potentiometer Solution Control Knob, Blue ADJUSTABLE HANDLE BAR LEFT = P/N RIGHT = P/N MiniMag Parts Manual V

31 Control Panel-Traction Drive 31 Item Part Number Part Description Options Qty CONTROL PANEL BOX, TRACTION MINI MAG TD CONTROL PANEL STICKER GROMMET, RUBBER 3/16 ID X 13/32 OD X 3/32 TH MICRO SWITCH Optional SPEED CONTROL KNOB, RED SUDS/SPRAY STICKER HOOK KEY SWITCH A KEY SET (REPLACE) LCD SCREEN SWITCH, TOGGLE, MOM/OFF/MOM (DPDT) SWITCH, TOGGLE, ON/OFF/ON (DPDT) METER STICKER SWITCH, TOGGLE, ON/ON (DPDT) TOGGLE, ON-OFF SPST Optional CONNECTOR, RED 0, HOUSING ONLY SWITCH, ROCKER, DPDT, ON/ON EMERGENCY SHUT OFF EMERGENCY LEGEND PLATE EMERGENCY CONTACT BLACK PUSH BUTTON SWITCH K POTENTIOMETER HOUR METER 2 24 H PROTECTIVE BOOT, TOGGLE SWITCH, (RED) 1 2 H-1119 PROTECTIVE BOOT, TOGGLE SWITCH, (YELLOW) 1 26 H-1119 PROTECTIVE BOOT, TOGGLE SWITCH, (GREEN) 1 2 H PROTECTIVE BOOT, TOGGLE SWITCH, (BLUE) Optional 2 2 H PROTECTIVE BOOT, TOGGLE SWITCH, (BLACK) 2 29 H PROTECTIVE BOOT, TOGGLE SWITCH, (GRAY) 1 30 H PROTECTIVE BOOT, TOGGLE SWITCH, (ORANGE) 1 31 H-1120 PROTECTIVE BOOT, TOGGLE SWITCH, (LIGHT BLUE) Optional 1 32 H-266 PHP MS 4-40 X 3/4" 2 33 H-3361 /16" INT/EXT STAR WASHER 2 34 H-04 NYLOK #4-40 SS 2 3 H-06 NYLOK #-32 SS 2 36 H-061 NYLOK /16" - 1 SS 4 3 H-092 KN 1/4-20 S/S 2 3 H-101 FW /16 ID X 3/4 OD SS 4 39 H-241 PPH #-32 X 1" S/S 2 40 H-33 BHSCS 1/4-20 X /" SS 2 41 H-4429 CB /16"- 1 X 3/4" SS 4 42 H-930K4 GROMMET, 1" ID X 1-3/4" OD BUNA-N END CAP BUTTON COVER SWITCH MOUNT PLATE PUSH BUTTON SWITCH 2 4 H-10 HEAT SHRINK 2 4 H-109 LW #10, SS 4 49 H-239 PPH #-32 X 1/2" S/S 4 MiniMag Parts Manual V

32 MiniMag Parts Manual V Control Panel-Traction Drive

33 Control Panel-Traction Drive 33 Item Part Number Part Description Qty CONTROL PANEL COVER CONTROL PANEL BOX, TRACTION SQUEEGEE LIFT LEVER LIFT KNOB BRACKET, LIMIT SWITCH SPACER, 1-1/4" LG EXPLOSION WARNING PLATE CIR. BREAKER - 1A, 24V CONTROLLER V SERIAL NUMBER PLATE LIMIT SWITCH AMP RELAY DETERGENT WARNING PLATE 1 14 H CB #10-32 X 1-1/4" SS 2 1 H-1032HCN HCN # H-4100 AB4-3A BLIND RIVET 12 1 H FW 3/" X 3/4 NYLON 1 1 H-0002 HCS 1/4"-20 X /" SS 1 19 H-04 NYLOK #4-40 SS 2 20 H-061 NYLOK /16" - 1 SS 2 21 H-0923 KN #10-32 SS 9 22 H-092 KN 1/4-20 S/S 2 23 H-1004 FW 1/" X /16" SS 2 24 H-1009 FW #10 SS 4 2 H-101 FW /16" X 3/4" SS 1 26 H-1063 LW 1/4" SS 1 2 H-1212 FNW 1/4" X 1" SS 1 2 H-121 FNW /16" X 1-1/2" SS 2 29 H-2494 PPH #4-40 X 1" S/S 2 30 H-21 PPH #10-32 X 1/2" S/S 31 H-234 PPH #10-32 X 3/4" S/S 4 32 H-3 BHSCS 1/4-20 X 1-3/4" SS 4 33 H-441 CB 1/4"- 20 X." SS 1 34 H-4429 CB /16"- 1 X 3/4" SS 2 3 H-N 04C NYL 1/4" - 20 SS 1 MiniMag Parts Manual V

34 34 32 Inch Squeegee Assembly P/N -60 SET OF P/N COMPLETE ASSEMBLY 4 FRONT SQUEEGEE BLADE P/N 22-L - LINATEX P/N 22-G - GUM RUBBER P/N 23-11H SET OF SQUEEGEE MTG. HARDWARE REAR SQUEEGEE BLADE P/N 22-4L - LINATEX P/N 22-4G - GUM RUBBER 34 MiniMag Parts Manual V

35 32 Inch Squeegee Assembly 3 Item Part No. Part Description Qty SQUEEGEE TRAIL MOUNTS BACK UP WHEEL GREY SQUEEGEE BAND, REAR SQUEEGEE BAND, FRONT " SQUEEGEE BODY STAR KNOB, 3/-16 THREAD 2-60B 4" SIDE WHEEL GREY 2-46 STANDOFF, 1.03" 2 9 H PPH #10-32 X 2 1/4" SS 2 10 H-0023 FW 1/4" NYLON 4 11 H-002 PPH #10-32 X 2 1/2" SS 2 12 H HCS 1/4"- 20 X 1.62" SS 2 13 H-3331 /16" ID SHAFT COLLAR 2 14 H-330 BHSCS 3/"- 16 X 3-1/2" S/S 2 1 H-0003 HCS 1/4"- 20 X 3/4" SS 4 16 H-006 HCS /16"- 1 X 3" SS 2 1 H-011 HN /16"- 1 SS 2 1 H-090 WINGNUT SS 19 H-101 FW /16" X 3/4" SAE SS 4 20 H-1063 LW 1/4" SS 6 21 H-106 LW /16" SS 2 22 H-106 LW 3/" SS 2 23 H-2 PPH #10-32 X 1 3/4" SS 2 24 H-26 PPH #10-32 X 2" SS 2 2 H-N 04C NYL 1/4" - 20 SS 2 26 H-N 06C NYL 3/- 16 SS 2 MiniMag Parts Manual V

36 36 3 Inch Squeegee Assembly 16 P/N -60 SET OF P/N 2-10 COMPLETE ASSEMBLY 36 FRONT SQUEEGEE BLADE P/N 2-L - LINATEX P/N 2-G - GUM RUBBER REAR SQUEEGEE BLADE P/N 2-4L - LINATEX P/N 2-4G - GUM RUBBER P/N 2-11H COMPLETE SET OF SQUEEGEE MTG. HARDWARE MiniMag Parts Manual V

37 3 Inch Squeegee Assembly 3 Item Part No. Part Description Qty SQUEEGEE TRAIL MOUNTS BACK UP WHEEL GREY SQUEEGEE BAND, REAR SQUEEGEE BAND, FRONT " SQUEEGEE BODY STAR KNOB, 3/-16 THREAD 2-60B 4" SIDE WHEEL GREY 2-46 STANDOFF, 1.03" 2 9 H PPH #10-32 X 2 1/4" SS 2 10 H-0023 FW 1/4" NYLON 4 11 H-002 PPH #10-32 X 2 1/2" SS 2 12 H HCS 1/4"- 20 X 1.62" SS 2 13 H-3331 /16" ID SHAFT COLLAR 2 14 H-330 BHSCS 3/"- 16 X 3-1/2" S/S 2 1 H-0003 HCS 1/4"- 20 X 3/4" SS 4 16 H-006 HCS /16"- 1 X 3" SS 2 1 H-011 HN /16"- 1 SS 2 1 H-090 WINGNUT SS 19 H-101 FW /16" X 3/4" SAE SS 4 20 H-1063 LW 1/4" SS 6 21 H-106 LW /16" SS 2 22 H-106 LW 3/" SS 2 23 H-2 PPH #10-32 X 1 3/4" SS 2 24 H-26 PPH #10-32 X 2" SS 2 2 H-N 04C NYL 1/4" - 20 SS 2 26 H-N 06C NYL 3/- 16 SS 2 MiniMag Parts Manual V

38 3 Shroud Assembly 3 MiniMag Parts Manual V

39 26 Inch Shroud Assembly 39 MiniMag Parts Manual V

40 40 2 Inch Shroud Assembly MiniMag Parts Manual V

41 2 Inch Shroud Assembly 41 Item Part No. Part Description Qty SHROUD SKIRT SHROUD, 2" " WHEEL (GRAY) 2 4 H-101 FW 3/ ID X / OD SS 2 H-32 BHSCS 1/4-20 X 1/2" SS 10 6 H-4433 CB /16"- 1 X 2" SS 2 H-NJ04C JNYL 1/4" - 20 SS 10 H-NJ0C JNYL /16"- 1 SS 2 MiniMag Parts Manual V

42 42 Disk Deck-Brush Drive WIRE REINF. CLEAR TUBE 1" DECK USE'S P/N " DECK USE'S P/N CURTAIN BAND 1" DECK USE'S P/N " DECK USE'S P/N DECK CURTAIN 1" DECK USE'S P/N " DECK USE'S P/N SCRUBDECK WHEEL ASSEMBLY MiniMag Parts Manual V

43 Disk Deck-Brush Drive Item Part Number Part Description Qty DISK DECK PLATFORM, 1" /2" ID X 2-3/4" LG WIRE REINF. CLEAR TUBE /2" ID X 14" LG WIRE REINF. CLEAR TUBE BALL VALVE, 1/4" W/BARBED FITTING LATERAL ARM DECK WHEEL PIVOT BRACKET DECK WHEEL PIVOT SUPPORT " WHEEL (RED) ADJUSTABLE SOLUTION FLOW VALVE, WITH 1/4" NPTF SPACER 1/2 OD X 1/4" BRUSH DRIVER SIDE WHEEL (GREY) /" ID, 1/2" OD, 1/4" LG BEARING STAR KNOB, 3/-24 THREAD LATERAL ARM /4" X 1" KEY /2 NPT X 1/2" BARB ELBOW INLINE FILTER MOTOR, 24-V, 3/4 HP, 200 RPM 1 20 H JNYL 3/- 24 SS 3 21 H-000 1/2" NPT LOCKNUT 2 22 H-111 SPRING, 1/2" ID X 2-1/2" LG 1 23 H-16 CLEVIS PIN, 3/" X 2-1/2" 1 24 H-00 HCS /16"- 1 X 1" SS 1 2 H-010 HCS 3/"- 16 X 1" SS 4 26 H-0112 HCS 3/"- 16 X 2-1/4" SS 1 2 H-0146 HCS 3/"- 24 X 2" SS 2 2 H-011 HN /16"- 1 SS 2 29 H-030 HN 1/4"- 2 SS 1 30 H-060 NYLOK 1/4"- 20 SS 1 31 H-061 NYLOK /16" - 1 SS H-0923 KN #10-32 SS 2 33 H-092 KN 1/4-20 S/S 34 H-1013 FW 1/4 ID X / OD SS 4 3 H-101 FW /16 ID X 3/4 OD SS 9 36 H-101 FW 3/ ID X / OD SS 2 3 H-102 FW 3/4 ID X 1-3/4 OD SS 1 3 H-106 LW /16" SS 3 39 H-106 LW 3/" SS 40 H-234 PPH #10-32 X 3/4" S/S 2 41 H-30 BHSCS /16-1 X H-4396 CB 1/4"- 20 X 1-3/4" SS 2 43 H-441 CB 1/4"- 20 X." SS 3 44 H-441 CB 1/4"- 20 X /" S/S 4 H-4429 CB /16"- 1 X 3/4" SS 2 46 H-4430 CB /16"- 1 X 1" SS 10 4 H-926A22 HCS 3/"- 24 X 3." SS 1 4 H-9646 SPRING, " LG X 1/2" OD X.03 WIRE 2 49 H-NJ04C JNYL 1/4" - 20 SS 2 0 H-NJ0C JNYL /16"- 1 SS 6 1 H-NJ06C JNYL 3/- 16 SS 1 2 H-RUE14 3/" RUE RING COTTER 1 3 M-6391K ID X.3 OD X.2 LG BEARING SLEEVE 4 M-922A201.32" ID X 3/4" OD X 1/2" LDPE SPACER 2 M-9434T2 3/4" DIA 1 HOLE TUBE STRAP 1 43 MiniMag Parts Manual V

44 44 Disk Deck-Traction Drive CURTAIN BAND 1" DECK USE'S P/N " DECK USE'S P/N DECK CURTAIN 1" DECK USE'S P/N " DECK USE'S P/N WIRE REINF. CLEAR TUBE 1" DECK USE'S P/N " DECK USE'S P/N ATTACH ALL LIFT ARMS TO DECK MiniMag Parts Manual V

45 Disk Deck-Traction Drive Item Part Number Part Description Qty DISK DECK COVER PLATE DISK DECK PLATFORM, 1" /2" ID X 2-3/4" LG WIRE REINF. CLEAR TUBE /2" ID X 14" LG WIRE REINF. CLEAR TUBE LATERAL ARM SPACER 1/2 OD X 1/4" MOTOR 3/4 HP X 20 RPM ADJUSTABLE SOLUTION FLOW VALVE BRUSH DRIVER SIDE WHEEL (GREY) /" ID, 1/2" OD, 1/4" LG BEARING STAR KNOB, 3/-24 THREAD LATERAL ARM /4" X 1" KEY /2 NPT X 1/2" BARB ELBOW INLINE FILTER 1 1 H FW 3/4" ID X 1 1/" OD X 3/32" SS 1 1 H JNYL 3/- 24 SS 2 19 H CB /16"- 1 X /" SS 2 20 H-000 1/2" NPT LOCKNUT 2 21 H-00 HCS /16"- 1 X 1" SS 1 22 H-010 HCS 3/"- 16 X 1" SS 4 23 H-0146 HCS 3/"- 24 X 2" SS 2 24 H-011 HN /16"- 1 SS 2 2 H-030 HN 1/4"- 2 SS 1 26 H-060 NYLOK 1/4"- 20 SS 1 2 H-061 NYLOK /16" - 1 SS 10 2 H-0923 KN #10-32 SS 2 29 H-092 KN 1/4-20 S/S 30 H-1013 FW 1/4 ID X / OD SS 4 31 H-101 FW /16 ID X 3/4 OD SS 9 32 H-106 LW /16" SS 3 33 H-106 LW 3/" SS 6 34 H-234 PPH #10-32 X 3/4" S/S 2 3 H-30 BHSCS /16-1 X H-4396 CB 1/4"- 20 X 1-3/4" SS 2 3 H-441 CB 1/4"- 20 X." SS 3 3 H-441 CB 1/4"- 20 X /" S/S 39 H-4430 CB /16"- 1 X 1" SS H-9646 SPRING, " LG X 1/2" OD X.03 WIRE 2 41 H FW 3/" SS 1 42 H-NJ04C JNYL 1/4" - 20 SS 2 43 H-NJ0C JNYL /16"- 1 SS 6 44 M-6391K ID X.3 OD X.2 LG BEARING SLEEVE 4 M-922A201.32" ID X 3/4" OD X 1/2" LDPE SPACER 2 46 M-9434T2 3/4" DIA 1 HOLE TUBE STRAP 1 MiniMag Parts Manual V

46 46 23 Inch Disk Deck-Brush Drive COMPLETE ADJUSTABLE ARM ASSEMBLY = P/N SCRUBDECK WHEEL ASSEMBLY MiniMag Parts Manual V

47 23 Inch Disk Deck-Brush Drive Item Part Number Part Description Qty DISK DECK PLATFORM, 23" CURTAIN BAND, 23" /2" ID X 4-1/2" LG WIRE REINF. CLEAR TUBE /2" ID X 2-3/4" LG WIRE REINF. CLEAR TUBE /2" ID X 14" LG WIRE REINF. CLEAR TUBE BALL VALVE, 1/4" W/BARBED FITTING LATERAL ARM DECK WHEEL PIVOT BRACKET DECK WHEEL PIVOT SUPPORT " LIFT BRACKET " DECK CURTAIN, REAR " WHEEL (RED) ADJUSTABLE SOLUTION FLOW VALVE, WITH 1/4" NPTF SPACER 1/2 OD X 1/4" BRUSH DRIVER /" ID, 1/2" OD, 1/4" LG BEARING STAR KNOB, 3/-24 THREAD ROD END, 3/-24 LEFT HAND THREAD ROD END, 3/-24 RIGHT HAND THREAD /4" X 1" KEY /2 NPT X 1/2" BARB ELBOW INLINE FILTER MOTOR, 24-V, 3/4 HP, 200 RPM ADJUSTABLE LATERAL ARM BODY 2 2 H JNYL 3/- 24 SS 3 26 H CB #10-32 X /" SS 6 2 H HCS 3/"- 24 X 2 1/2" S/S 2 2 H / ID X / OD SHIM 4 29 H-000 1/2" NPT LOCKNUT 2 30 H-111 SPRING, 1/2" ID X 2-1/2" LG 1 31 H-16 CLEVIS PIN, 3/" X 2-1/2" 1 32 H-3696 LH HX JAM.3-24 SS 2 33 H ID X.3 OD X.0 LG BEARING SLEEVE 4 34 H-00 HCS /16"- 1 X 1" SS 1 3 H-010 HCS 3/"- 16 X 1" SS 4 36 H-0112 HCS 3/"- 16 X 2-1/4" SS 1 3 H-010 HN 1/4"- 20 SS 1 3 H-032 HX JAM.3-24 SS 2 39 H-061 NYLOK /16" - 1 SS 1 40 H-0923 KN #10-32 SS 41 H-101 FW /16 ID X 3/4 OD SS 9 42 H-101 FW 3/ ID X / OD SS 2 43 H-102 FW 3/4 ID X 1-3/4 OD SS 1 44 H-106 LW /16" SS 1 4 H-106 LW 3/" SS H-234 PPH #10-32 X 3/4" S/S 2 4 H-441 CB 1/4"- 20 X." SS 2 4 H-4429 CB /16"- 1 X 3/4" SS 9 49 H-4430 CB /16"- 1 X 1" SS 4 0 H-4431 CB /16"- 1 X 1-1/4" SS 4 1 H-926A22 HCS 3/"- 24 X 3." SS 1 2 H-902 FW 3/" GRADE 4 3 H-NJ04C JNYL 1/4" - 20 SS 2 4 H-NJ06C JNYL 3/- 16 SS 1 H-RUE14 3/" RUE RING COTTER 1 6 M-6391K ID X.3 OD X.2 LG BEARING SLEEVE 4 M-9434T2 3/4" DIA 1 HOLE TUBE STRAP 1 MiniMag Parts Manual V

48 4 23 Inch Disk Deck-Traction Drive MiniMag Parts Manual V

49 23 Inch Disk Deck-Traction Drive 49 Item Part Number Part Description Qty DISK DECK COVER PLATE DISK DECK PLATFORM, 23" CURTAIN BAND, 23" /2" ID X 2-3/4" LG WIRE REINF. CLEAR TUBE /2" ID X 14" LG WIRE REINF. CLEAR TUBE /2 ID X 6-3/4" LG WIRE REINF. CLEAR TUBE LATERAL ARM " LIFT BRACKET " DECK CURTAIN, REAR MOTOR 3/4 HP X 20 RPM ADJUSTABLE SOLUTION FLOW VALVE BRUSH DRIVER /" ID, 1/2" OD, 1/4" LG BEARING STAR KNOB, 3/-24 THREAD /4" X 1" KEY /2 NPT X 1/2" BARB ELBOW INLINE FILTER ADJUSTABLE LATERAL ARM 2 19 H JNYL 3/- 24 SS 2 20 H CB #10-32 X /" SS 6 21 H HCS 3/"- 24 X 2 1/2" S/S 2 22 H-000 1/2" NPT LOCKNUT 2 23 H-00 HCS /16"- 1 X 1" SS 1 24 H-010 HCS 3/"- 16 X 1" SS 4 2 H-030 HN 1/4"- 2 SS 1 26 H-061 NYLOK /16" - 1 SS 1 2 H-0923 KN #10-32 SS 2 H-101 FW /16 ID X 3/4 OD SS 9 29 H-101 FW 3/ ID X / OD SS 1 30 H-102 FW 3/4 ID X 1-3/4 OD SS 1 31 H-106 LW /16" SS 1 32 H-106 LW 3/" SS 6 33 H-234 PPH #10-32 X 3/4" S/S 2 34 H-44?? CB /16"- 1 X 1/2" SS 2 3 H-441 CB 1/4"- 20 X." SS 2 36 H-4429 CB /16"- 1 X 3/4" SS 3 H-4430 CB /16"- 1 X 1" SS 4 3 H-4431 CB /16"- 1 X 1-1/4" SS 4 39 H-902 FW 3/" GRADE 4 40 H-NJ04C JNYL 1/4" - 20 SS 2 41 M-6391K ID X.3 OD X.2 LG BEARING SLEEVE 42 M-9434T2 3/4" DIA 1 HOLE TUBE STRAP 1 MiniMag Parts Manual V

50 0 26 Inch Disk Deck-Traction Drive MiniMag Parts Manual V

51 26 Inch Disk Deck-Traction Drive 1 Item Part Number Part Description Qty SHROUD PLATE DISK DECK PLATFORM, 26" CURTAIN BAND, 26" DISK DECK CURTAIN, 26" /2" ID X 14" LG WIRE REINF. CLEAR TUBE /2" ID X 2" LG WIRE REINF. CLEAR TUBE /2" ID X 2-1/2" LG WIRE REINF. CLEAR TUBE /2" ID X -1/2" LG WIRE REINF. CLEAR TUBE LATERAL ARM SPACER 1/2 OD X 1/4" MOTOR 3/4 HP X 20 RPM AD USTABLE SOLUTION FLOW VALVE BRUSH DRIVER STAR KNOB /" ID, 1/2" OD, 1/4" LG BEARING LATERAL ARM /4" X 1" KEY /2 " PLASTIC BARB TEE /2 NPT X 1/2" BARB ELBOW INLINE FILTER 1 21 H FW 3/4 X 1 1/ X 3/32 SS 2 22 H HCS 3/"- 24 X 1 1/" SS 1 23 H NYL 3/- 24 SS 2 24 H-000 1/2" NPT LOCKNUT 4 2 H-00 HCS /16"- 1 X 1" SS 2 26 H-010 HCS 3/"- 16 X 1" SS 2 H-0141 HCS 3/"-24 X 3/4" SS 2 2 H-030 HN 1/4"- 2 SS 1 29 H-061 NYLOK /16" - 1 SS 30 H-0923 KN #10-32 SS 2 31 H-092 KN 1/4-20 S/S 32 H-101 FW /16" X 3/4" SAE SS H-106 LW /16" SS 2 34 H-106 LW 3/" SS 11 3 H-234 PPH #10-32 X 3/4" S/S 2 36 H-441 CB 1/4"- 20 X." SS 3 H-4430 CB /16"- 1 X 1" SS 3 H FW 3/" SS 2 39 H-N 04C NYL 1/4" - 20 SS 2 40 M-6391K ID X.3 OD X.2 LG BEARING SLEEVE MiniMag Parts Manual V

52 2 2 Inch Disk Deck-Traction Drive 2 MiniMag Parts Manual V

53 2 Inch Disk Deck-Traction Drive 3 MiniMag Parts Manual V

54 4 20 Inch EDGE Deck Isolator kit # Edge-220 Includes 6-Isolators 6-Bolts 6-Washers 6-lock washers 6-Nylok Nuts STANDARD (OPTIONAL HD) Eccentric kit # Edge-211 Includes 1-Eccentric -Bolts 1-Gasket 1-Sticker seal 1-pack of blue Loctite Isolator kit # Edge-209 Includes 4-Isolators 1-Hour meter 4-Bolts 4-Nuts 1-Gasket 1-Sticker seal See common wear parts for proper pad application. 4 MiniMag Parts Manual V

55 20 Inch EDGE Deck Item Part No. Part Description Qty STAR KNOB, 3/-16 THREAD " SIDE WHEEL (GREY) VALVE BRACKET FLOW VALVE (24V) Z CRUSH WASHER Z RUBBER ISOLATOR Z 20 & 2" SPACER Z 20 INCH ALUMINUM PAD DRIVER Z GRIP FACE /4" BEARING GASKET ISOLATOR STICKER INCH EDGE SOL. FEED TUBE INCH SQUARE HEAD DECK LBS TOP WEIGHT LEVEL ADJUSTABLE LATERAL ARM (LH) DECK LIFTING BRACKET (RH) DECK LIFTING BRACKET WHEEL BRACKET LATERAL ARM BALL VALVE, 3/" INLINE FILTER HOUR METER 1 24 EDGE-20 INCH EDGE STICKER 1 2 H CB #10-32 X 1-1/2" SS 3 26 H-0464 ELBOW, 3/" MNPT X 1/2" BARB X 90 DEG, NYLON 4 2 H FW 3/" X 3/4" NYLON 12 2 H-000 HCS 1/4"- 20 X 1" SS 1 29 H-001 HCS /16"- 1 X 1/2" 6 30 H-010 HCS 3/"- 16 X 1" SS 4 31 H-04 NYLOK #4-40 SS 2 32 H-0 NYLOK #10-32 SS 33 H-061 NYLOK /16" - 1 SS 1 34 H-1009 FW #10 SS 2 3 H-1013 FW 1/4 ID X / OD SS 1 36 H-101 FW /16 ID X 3/4 OD SS 14 3 H-1063 LW 1/4" SS 1 3 H-106 LW /16" SS 6 39 H-106 LW 3/" SS 6 40 H-1190 HCS 3/"- 16 X 2-1/2" SS (FULLY THREADED) 2 41 H-239 PPH #-32 X 1/2" S/S 4 42 H-246 PPH #4-40 X 1/2" S/S 2 43 H-21 PPH #10-32 X 1/2" S/S 2 44 H-21 PPH #10-32 X /" SS 2 4 H-34 BHSCS 1/4-20 X 3/4" SS 46 H-39 BHSCS /16-1 X 3/4" 4 4 H-4401 CB /16"- 1 X 1-3/4" SS 2 4 H-4430 CB /16"- 1 X 1" SS 4 49 H-4432 CB /16"- 1 X 1-1/2" SS 4 0 H-NJ0C JNYL /16"- 1 SS 2 1 T-00R000 FILTER TO VALVE 1 2 T-00R120 VALVE TO FEED TUBE 1 3 T VALVE PAD 1 MiniMag Parts Manual V

56 6 2 Inch EDGE Deck Isolator kit # Edge-220 Includes 6-Isolators 6-Bolts 6-Washers 6-lock washers 6-Nylok Nuts STANDARD (OPTIONAL HD) Eccentric kit # Edge-212 Includes 1-Eccentric -Bolts 1-Gasket 1-Sticker seal 1-pack of blue Loctite Isolator kit # Edge-210 Includes -Isolators 1-Hour meter -Bolts -Nuts 1-Gasket 1-Sticker seal 9 46 See common wear parts for proper pad application. 6 MiniMag Parts Manual V

57 2 Inch EDGE Deck Item Part No. Part Description Qty STAR KNOB, 3/-16 THREAD " SIDE WHEEL (GREY) VALVE BRACKET FLOW VALVE (24V) Z CRUSH WASHER Z RUBBER ISOLATOR Z 20 & 2" SPACER Z 2 INCH ALUMINUM PAD DRIVER Z GRIP FACE /4" BEARING GASKET ISOLATOR STICKER INCH EDGE SOL. FEED TUBE LBS TOP WEIGHT INCH SQUARE HEAD DECK LEVEL ADJUSTABLE LATERAL ARM (LH) DECK LIFTING BRACKET (RH) DECK LIFTING BRACKET WHEEL BRACKET LATERAL ARM BALL VALVE, 3/" INLINE FILTER STANDOFF, 1.03" HOUR METER 1 2 EDGE-20 INCH EDGE STICKER 2 26 H CB #10-32 X 1-1/2" SS 3 2 H-0464 ELBOW, 3/" MNPT X 1/2" BARB X 90 DEG, NYLON 4 2 H FW 3/" X 3/4" NYLON H-000 HCS 1/4"- 20 X 1" SS 1 30 H-001 HCS /16"- 1 X 1/2" 6 31 H-010 HCS 3/"- 16 X 1" SS 4 32 H-04 NYLOK #4-40 SS 2 33 H-0 NYLOK #10-32 SS 34 H-061 NYLOK /16" - 1 SS 26 3 H-1009 FW #10 SS 2 36 H-1013 FW 1/4 ID X / OD SS 1 3 H-101 FW /16 ID X 3/4 OD SS 14 3 H-1063 LW 1/4" SS 1 39 H-106 LW /16" SS 6 40 H-106 LW 3/" SS 6 41 H-1190 HCS 3/"- 16 X 2-1/2" SS (FULLY THREADED) 2 42 H-239 PPH #-32 X 1/2" S/S 4 43 H-246 PPH #4-40 X 1/2" S/S 2 44 H-21 PPH #10-32 X 1/2" S/S 2 4 H-21 PPH #10-32 X /" SS 2 46 H-34 BHSCS 1/4-20 X 3/4" SS 4 H-39 BHSCS /16-1 X 3/4" 4 H-4401 CB /16"- 1 X 1-3/4" SS 4 49 H-4430 CB /16"- 1 X 1" SS 4 0 H-4432 CB /16"- 1 X 1-1/2" SS 4 1 T-00R000 FILTER TO VALVE 1 2 T-00R120 VALVE TO FEED TUBE 1 3 T VALVE PAD 1 MiniMag Parts Manual V

58 26 Inch Disk Jaws MiniMag Parts Manual V

59 26Inch Disk Jaws 9 MiniMag Parts Manual V

60 60 Cylindrical Door Assembly "NEW STYLE" DOOR ASSEMBLY SERIAL #0000 GREATER "OLD STYLE" DOOR ASSEMBLY PRIOR TO SERIAL # MiniMag Parts Manual V

61 Cylindrical Door Assembly 61 "NEW STYLE" DOOR ASSEMBLY SERIAL #0000 GREATER Item Part Number Part Description Qty CYLINDRICAL WIPER WIPER BAND DRIVE COVER A IDLER DRIVE BEARING BRUSH DRIVER/IDLER NEW STYLE GROMMET DOOR LATCH 1 H /16" X 3/4" KEY 1 9 H NYL 3/- 24 SS 1 10 H-101 FW 3/" X /" SS 1 11 H-262 FHP #10-32 X 1/2" SS 4 12 H-4419 CB 1/4"- 20 X." SS 3 13 H-N 04C NYL 1/4" - 20 SS 3 "OLD STYLE" DOOR ASSEMBLY PRIOR TO SERAIL #0000 Item Part Number Part Description Qty BEARING HOUSING IDLER BEARING CYLINDRICAL BRUSH IDLER CYLINDRICAL WIPER WIPER BAND DRIVE COVER GROMMET DOOR LATCH 1 22 H-232 SETSCREW, KCP, 1/4"-20 X 1/2" 2 23 H-262 FHP #10-32 X 1/2" SS 4 24 H-4419 CB 1/4"- 20 X." SS 3 2 H-K1432 3/16" X 1/2" KEY 1 26 H-N 04C NYL 1/4" - 20 SS 3 MiniMag Parts Manual V

62 MiniMag Parts Manual V Cylindrical Deck Assembly

63 Cylindrical Deck Assembly 63 NOTE: SEE COMMON WEAR PARTS PAGE FOR BRUSH SELECTION. MiniMag Parts Manual V

64 64 Cylindrical Deck Assembly MiniMag Parts Manual V

65 Cylindrical Deck Assembly 6 Item Part Number Part Description Qty /2" ID X 16" LG WIRE REINF. CLEAR TUBE ROLLER SPACER 1/2 OD X 1/4" AD USTABLE SOLUTION FLOW VALVE ROLLER BRACKET /2" ID X 2-3/4" LG WIRE REINF. CLEAR TUBE /2" ID X 12-1/4" LG WIRE REINF. CLEAR TUBE CYLINDRICAL BRUSHHEAD, 24" INLINE FILTER 1 10 H HB /"- 11 X 10" 2 11 H-303 NYL /" H-030 HN 1/4"- 2 SS 1 13 H-061 NYLOK /16" - 1 SS 1 14 H-0923 KN #10-32 SS 2 1 H-441 CB 1/4"- 20 X." SS 2 16 H-4429 CB /16"- 1 X 3/4" SS 1 1 H-N 04C NYL 1/4" - 20 SS 2 NOTE: SEE COMMON WEAR PARTS PAGE FOR BRUSH SELECTION. MiniMag Parts Manual V

66 66 Cylindrical Deck Assembly MiniMag Parts Manual V

67 Cylindrical Deck Assembly 6 Item Part Number Part Description Qty CYLINDRICAL LIFTING BRACKET " HOPPER CYLINDRICAL LIFTING BRACKET, LEFT, 24" CYLINDRICAL LIFTING BRACKET, RIGHT, 24" LATERAL ARM HOPPER RAIL AD USTABLE LATERAL ARM BODY CYLINDRICAL BRUSHHEAD, 24" /" ID, 1/2" OD, 1/4" LG BEARING ROD END, 3/-24 LEFT HAND THREAD ROD END, 3/-24 RIGHT HAND THREAD 2 12 H NYL #10-32, 1- S/S 13 H / ID X / OD SHIM 4 14 H-0313 CLEVIS PIN 3/" 3.00" 1 1 H-3696 LH HX AM.3-24 SS 2 16 H-0109 HCS 3/"- 16 X 1-1/2" SS 2 1 H-0110 HCS 3/"- 16 X 1-3/4" SS 2 1 H-032 HX AM.3-24 SS 2 19 H-061 NYLOK /16" - 1 SS H-062 NYLOK 3/"-16 SS 4 21 H-101 FW /16" X 3/4" SS 4 22 H-101 FW 3/" X /" SS 6 23 H-106 LW 3/" SS 6 24 H-264 FHP X 3/4" SS 6 2 H-44 CB /16"- 1 X 1/2" SS 2 26 H-4429 CB /16"- 1 X 3/4" SS 10 2 H-4430 CB /16"- 1 X 1" SS 4 2 H-902 FW 3/" GRADE 4 29 H-N 0C NYL /16"- 1 SS 4 30 H-RUE14 3/" RUE RING COTTER 1 NOTE: SEE COMMON WEAR PARTS PAGE FOR BRUSH SELECTION. MiniMag Parts Manual V

68 6 Spray Jet Option MiniMag Parts Manual V

69 Spray Jet Option 69 Item Part Number Part Description Comments Qty /2" ID X -/12" LG. WIRE REINF. CLEAR TUBE /2" ID X 2-1/2" LG. WIRE REINF. CLEAR TUBE /2" ID X 11" LG. WIRE REINF. CLEAR TUBE Dis Mac ines Only /2" ID X 1" LG. WIRE REINF. CLEAR TUBE Cylin rical Mac ines Only /2" BARBED ELBOW PLASTIC GARDEN HOSE, 10 LG /2 " PLASTIC BARB TEE 1-91 PUMP, WATER ET SPRAY NO LE 1 10 H ID X 1.12 OD RUBBER WASHER 1 11 H-6200 HOSE CLAMP /"- 1-1/2" SS 2 12 H-0 NYLOK #10-32 SS 4 13 H-0923 KN #10-32 SS 4 14 H-1010 FW 3/16 11/16 OD SS 4 1 H-222 CB #10-32 X 1-1/4" SS 4 MiniMag Parts Manual V

70 0 Vac Wand Kit 2 P/N COMPLETE ASSEMBLY Item Part Number Part Description Qty HOSE CUFF, 1 1/2" /2" - 2" HOSE CUFF HOSE, VACUUM, 1-1/2" X 1, W/CUFFS VACUUM NO LE 1-4 COUPLER, S/S TWO PIECE CHROME VAC WAND 1 0 MiniMag Parts Manual V

71 Electric Squeegee Lift Item Part Number Part Description Qty AUTO SQUEEGEE LIFT BRACKET " STROKE 24V ACTUATOR 40 LB LOAD 1 3 H-0161 CLEVIS PIN, 1/2" OD X 2" LG. 1 4 H-061 NYLOK /16" - 1 SS 2 H-4429 CB /16"- 1 X 3/4" SS 2 6 H-RUE22 1/2" RUE RING COTTER 1 MiniMag Parts Manual V

72 2 Battery Packs CHARGER PARTS LIST WIRING DIAGRAM PARTS LIST FOR PART # VAC / 60 HZ 24 VDC - 12A PART NO. QTY. DESCRIPTION S/O 1 CASE ASSEMBLY S/O 1 TRANSFORMER S 1 POWER SWITCH BUSHING, STRAIN RELIEF, FOR CORDS S/O 1 CORDSET, AC, 1/3, 102", W/ MOLDED PLUG CORDSET, DC, 14/2, 10", W/ SB0 RED PLUG 19630S 1 ELECTRONIC TIMER ASSEMBLY 2 MiniMag Parts Manual V

73 Battery Packs 3 *BRUSH DRIVE BATTERY PACK SHOWN* (2) 12-V BATTERY WIRING DIAGRAM On-Board Charger (see list below) USE PART NUMBER FOR STANDARD MINI MAG USE PART NUMBER FOR TALL MINI MAG Item Part Number Part Description Qty 1 H-060 NYLOK 1/4"- 20 SS 2 2 H-1013 FW 1/4 ID X / OD SS 2 3 H-4419 CB 1/4"- 20 X." SS WIRE HARNESS, COMPLETE 1 WHICH BATTERY CHARGER TO USE WITH BATTERY SELECTION Battery Part Number Off-Board Charger Off-Board Charger On-Board Charger On-Board Charger & Description North American Export North American Export (12V, 11 AH) (12V, 1 AH) (12V, 11 AH, M.F.) (12V, 130 AH) (12V, 22 AH) N/A N/A Note: Japan & Korea are not included for list above. BATTERY NOTE: P/N IS STANDARD ON BRUSH DRIVE MACHINES. P/N IS STANDARD ON TRACTION DRIVE & OPTIONAL ON BRUSH DRIVE MACHINES. P/N IS OPTIONAL ON TRACTION DRIVE & BRUSH DRIVE MACHINES. P/N IS OPTIONAL ON TRACTION DRIVE & BRUSH DRIVE MACHINES. MiniMag Parts Manual V

74 4 SUDS System SOAP OPTIONS: PC0 - CITRUS GREEN PC33 - LOW ph PC - HIGH POWER PC - GLOSS PC9 - HD DETAIL E DETAIL A DETAIL B 14 DETAIL D D A DETAIL C E B C 13 4 MiniMag Parts Manual V

75 SUDS System Item Part Number Part Description Qty SOAPJUG CAP SOAP TRAY, SINGLE SWITCH, TOGGLE, ON/OFF/ON (DPDT) SOAP PUMP, 24V 1 H-0119 PROTECTIVE BOOT, TOGGLE SWITCH, (GREEN) 1 6 H-0121 CB #10-32 X 1/2" SS H /" NYLON LOOP CLAMP H-0 NYLOK #10-32 SS 9 H-060 NYLOK 1/4"- 20 SS 2 10 H-21 PPH #10-32 X 1/2" S/S 11 H-4419 CB 1/4"- 20 X." SS 2 12 M-294K369 NYLON BARBED TUBE FITTING, 3/16 ID X 1/16" NPT 1 13 M-116K46 1/2" X 1/2" BARB 1 14 M-930K23 GROMMET, RUBBER 3/ ID X / OD X 1/ TH. 1 1 T-01CR2000 3/16" ID X 20" LG. C.R. TUBE 1 16 T-01CR200 3/16" ID X 2" LG. C.R. TUBE 1 MiniMag Parts Manual V

76 6 Common wear parts Common Wear Parts Brushes Model 1"-Disk Model 20"-Disk Model 23"-Disk Model 26"-Disk Model 2"-Disk Super-Grit SS SS SS SS SS Tough-Grit S S S S S Midi-Grit C C C C C Light-Grit PS PS PS PS PS Poly (.02) P P P P P Nylon (.016) N N N N N Tampico T T T T T Pad Driver D D D D D Diamond Driver DD DD N/A N/A N/A Brush repair kit: Replacement locating clip for all brushes. Squeegee size Model 1"-Disk NEW STYLE CYL BRUSHES FOR MACHINE SERIAL #0000 & GREATER Squeegee blade kits & Complete Squeegee assemblies Model 20"-Disk Model 23"-Disk Brushes Model 24"-Cyl Super-Grit N/A Tough-Grit 22-21S Midi-Grit 22-21C Light-Grit 22-21PS Poly (.02) N/A Nylon (.016) 22-21N Brushes Super-Grit Tough-Grit Midi-Grit Light-Grit Poly (.02) Nylon (.016) Tampico Model 26"-Disk Model 24"-Cyl N/A S C PS N/A N N/A Model 24"-Cyl NOTE: # In Disk Column Denotes Pad Size: 13,1, 1 Pads Disk Level Color Super-Black ##-422 BB Very High Black Black ##-422 B High Black Brown ##-422 BR High Brown Green ##-422 G Medium Green Blue ##-422 BL Moderate Blue Red ##-422 R Moderate Red White ##-422 W Light White Extra pad driver retaining clip: OLD STYLE CYL BRUSHES FOR MACHINES PRIOR TO SERIAL #0000 Model 2"-Cyl Gum Rubber blade kit Linatex blade kit Complete squeegee assemblies 32" squeegee Standard Standard Standard Standard Standard Optional 22-0 G 22-0 L " squeegee Optional Optional Optional Optional Optional Standard 2-0 G 2-0 L 2-10 NOTE: Squeegee blade kits include (1) Rear Blade, (1) Front Blade, and (2) Backup Wheels with harware. NOTE: Squeegee Assemblies (complete) listed above all come with Linatex blades. NOTE: Size is stamped into the top of the painted steel squeegee body on all squeegee's. NOTE: The 32" squeegee is designed for narrow isles and may not have the same water control around tight turns as the larger squeegees. SOAP Heavy Duty Degreaser Citrus Freezer Tire Mark Remover For more soap information call PowerCat Commonwearpartspage29 MiniMag Parts Manual V

77 MiniMag Suggested Parts Inventory Suggest parts inventory Quantity Part # Description G Squeegee Rebuild Kit 32'' Gum L Squeegee Rebuild Kit 32'' Linatex 1 2-0G Squeegee Rebuild Kit 3'' Gum 1 2-0L Squeegee Rebuild Kit 3'' Linatex 2-60 Squeegee Side Roller Wheels 2 H-006 Side Roller Wheel Bolt Solution Solenoid Vacuum Motor Vacuum Motor Gasket Main Power Switch Recovery Lid Assembly Tank Lid Gasket Pushbutton Switch Rheostat, Speed Setting k 1-23 DPDT Toggle Switch LCD Circuit Breaker Brush Driver Vac Screen Snap Grip Clamp 2-1/'' - 2-3/'', Nylon Vacuum Saver Loader Valve Squeegee Hose Drain Hose Cap Drain Hose Casters MiniMag BD Control Panel Sticker MiniMag HD Control Panel Sticker Front Tire Grey Front Tire Black Solid Solution Filter Solution Knob Speed Knob Tank Lid Latch Squeegee Cable BD Squeegee Cable TD Squeegee Knobs 1 H Switch Cover - Red 1 H Switch Cover - Black Squeegee Lift Knob Hella Relay Vac Switch On-Board Charger Charger Cord MiniMag Parts Manual V

78

79