Adhancer BR 800S TRIO EDS

Size: px

Start display at page:

Download "Adhancer BR 800S TRIO EDS"

Cora Barber
5 years ago
Views:

1 Adhancer BR 800S TRIO EDS PARTS LIST Advance Models: (R28-C), (R32-C) Nilfisk Models: (BR 800S TRIO EDS ) 7/06 revised 3/08

2 08-3 Common Kits **# Kit, On-Board Charger TSBUS / TSBUS **# Kit, OnBoard Charger, AGM TSBUS ** Kit, Seat Armrests ** Kit, Warning Beacon NOTE 1 ** Kit, Scrub-N-Vac Tool W/Pump NOTE 1 ** Kit, Seatbelt NOTE 1 ** Kit, Headlight NOTE 1 Advance Only Kits ** Kit, Battery Fill Indicator (Advance only) ** Kit, Battery Watering (Advance only) NOTE 1 ** Kit, Deck 2400D (Advance only) NOTE 1 ** Kit, Deck 2400C (Advance only) NOTE 1 ** Kit, Deck 2600D (Advance only) NOTE 1 ** Kit, Deck 2600C (Advance only) NOTE 1 ** Kit, Deck 2810D (Advance only) NOTE 1 ** Kit, Deck 2810C (Advance only) NOTE 1 ** Kit, Deck 3210D (Advance only) NOTE 1 ** Kit, Deck 3210C (Advance only) NOTE 1 ** Kit, Dual Vac Motor (Advance only) NOTE 1 **# Kit, OnBoard Charger, GEL (Advance only) TSBUS Nilfisk Only Kits ** Kit, Deck BR 600S (Nilfisk only) NOTE 1 ** Kit, Deck BR 600SC (Nilfisk only) NOTE 1 ** Kit, Deck BR 700S (Nilfisk only) NOTE 1 ** Kit, Deck BR 700SC (Nilfisk only) NOTE 1 ** Kit, Dual Vac Motor (Nilfisk only) NOTE 1 28 Squeegee Blade Kits ** Kit, Standard Squeegee Blade NOTE 2 ** Kit, Linatex Squeegee Blade NOTE 2 ** Kit, Neoprene Squeegee Blade NOTE 2 32 / BR 800S Trio EDS Squeegee Blade Kits ** Kit, Standard Squeegee Blade NOTE 2 ** Kit, Linatex Squeegee Blade NOTE 2 ** Kit, Neoprene Squeegee Blade NOTE 2 Disk Deck Blade Kits ** Kit, Side Skirt NOTE 3 Advance Optional Batteries ** Battery, 6V, 305A/H ** Battery, 6V, 235A/H **# Battery, 6V 315A/H AGM Advance Optional Battery Chargers ** A/R Battery Charger, 36VDC, Auto, 20Amp, 120VAC/60HZ ** A/R Battery Charger, 36VDC, Auto, 25Amp, 120VAC/60HZ ** A/R Battery Charger, 36VDC, Auto, 36Amp, 120VAC/60HZ ** A/R Battery Charger, 36VDC, 20Amp, 230VAC/50HZ ** A/R Battery Charger, 36VDC, 36Amp, 230VAC/50HZ Accessories ** A/R Programmer, 1311 User ** A/R Programmer Cable ** = Optional, Not Included NOTE 1: Replacement parts for the kits listed above can be found on each kit s associated instruction sheet. NOTE 2: All squeegee blade kits include both front and rear squeegee blades. NOTE 3: All deck blade kits include all skirts required for the scrub deck.

3 06-7 TABLE OF CONTENTS DESCRIPTION PAGE Chassis System Decal System Detergent Injection System (AXP/EDS) Drive & Brake Pedal Assemblies Electrical Panel Assembly Front Wheel Assembly Recovery System Scrub System Skirt Assemblies Solution System Squeegee Assembly Squeegee System Steering Column Assembly Battery Watering System On-Board Charger Kit Wiring Diagram WHEN ORDERING PARTS * Use the 8 digit numbers from the Ref. No. columns in this parts list. * Specify the model and serial number of the machine. * Use the space below to record the model and serial number for future reference. Model Serial No.

4 2 CHASSIS SYSTEM

5 CHASSIS SYSTEM Wsh, Flt SAE 1/ Pin, Cotter Hair Scr, Hex Nyl Loc M x 35mm Scr, Hex Nyl Loc M x 20mm Wsh, Flt.406 x 1.50 x Bushing Trim Edge Scr, Pan Phil Thd Form 1/4-20 x Bearing, Flange Assembly, Wheel and Bearing (each assembly includes two bearings) Bearing, Ball ** Wheel Assy, Scrubber Weldment, Chassis Pin, Actuator Linkage, Arm Weldment Nut, Wing 1/ Squeegee Stop Bracket Scr, Hex Thd To Hd 5/16-18 x Wsh, Flt.344 x.938 x Nut, Hex Jam 5/ Tie, Cable * Tie, Cable * Cable Tie * = Not Shown ** = Optional

6 4 DECAL SYSTEM

7 06-7 DECAL SYSTEM Decal, Caution Decal, Logo Decal, Emergency Decal, Battery Wiring Decal, Parking Brake Decal, Patent Number Decal, Circuit Breaker Decal, Adhancer (Advance only) Decal, BR 800S TRIO EDS (Nilfisk only) Decal, Logo 2 Inch Decal, Ladder Diagram

8 6 DETERGENT INJECTION SYSTEM (AXP/EDS 06-7

9 06-7 DETERGENT INJECTION SYSTEM (AXP/EDS) Detergent Injection Assembly (items 1-21) Wsh, Flt.266 x.750 x Tie, Cable Nut, Hex Nyl Loc-Thin Nut, Hex Nyl Loc-Thin 1/ Scr, Pan Phil 1/4-20 x Scr, Pan Phil SS 1/4-20 x Bushing, 1/4 ID Snub Gasket, Strip Control Assembly Control Decal Tray, Detergent Weldment, Detergent Box Cover, Detergent Cover, Pump Pad, Detergent Pump, Detergent Hose, Chem Resistant Chemical Bottle Assy Indicator Assy **# A/R AXP 3n1 Adhancing Agent, 4 pack **# A/R Chem Bottle Assy (18-21) Cap, Raw Cap, Dry Break, 1/8 Barb, Insert, Dry Break # = Revised or new since last update

10 8 DRIVE & BRAKE PEDAL ASSEMBLIES

11 06-7 DRIVE & BRAKE PEDAL ASSEMBLIES Scr, Pan Phil x Nut, Hex Nyl Loc Scr, Hex M x 25mm Nut, Hex Nyl Loc M Scr, Hex M x 75mm Scr, Pan Phil Thd Form x Wsh, Flt SS.260 x x Bearing, Flange Bushing Spacer, Nylon Lever, Throttle Link Weldment Housing, Potentiometer Potentiometer, 5K (R1) Spring, Torsion Bracket, Foot Pedal Foot Pedal Bracket, Brake Lock, Brake Mat, Pedal Mat, Pedal Pedal Weldment Wire Assy Bearing, Flange Wsh, Flt SAE 1/ Scr, Pan Phil SS 1/4-20 x Bushing Scr, Hex Thd to Hd M6-1.0 x 16mm Ring, Ret Ext Type E Reinf Dia 30# Pedal Assy # = Revised or new since last update

12 10 ELECTRICAL PANEL ASSEMBLY

13 06-7 ELECTRICAL PANEL ASSEMBLY Scr, Pan Phil x Scr, Pan Phil SS 1/4-20 x Scr, Pan Phil 1/4-20 x Nut, Hex W/SHPRF 1/ Stud Wsh, Flt SAE 1/ Circuit Breaker, 10 Amp (Control Circuit / F3) 8# Contactor (Brush Drive / K1) (Advance only) Gasket Fuse, 150 Amp (F1) Horn / Backup Alarm (H1) Boot, Reset Button Boot, Reset Button Standoff, Insulated Cover, Electrical Controller (A1) Electrical Panel Circuit Breaker, 45 Amp (Wheel Drive / F2) Gasket 20# Contactor (Vacuum System / K2) (Advance only) Scr, Pan Phil Thd Form 8-32 x Weldment, Harness Guide # = Revised or new since last update

14 12 FRONT WHEEL ASSEMBLY 06-7

15 06-7 FRONT WHEEL ASSEMBLY Scr, Soc Hd 5/16-18 x Nut, Hex Nyl Loc-Thin 5/ Scr, Hex Hd Loc 3/8-16 x Scr, Soc Hd M x 70mm Scr, Soc Hd M x 55mm Wsh, Flt.344 x.938 x Bearing Cup Bearing Cone Seal, Shaft Bearing, Ball Spring Nut, Hex Nyl Loc-Thin 1-14 UNF Rivet, Nylon Tree Push-In Block, Bearing Plate, Steering Rod, Brake Motor / Drive Wheel Assy (M3) * Drive Wheel Harness Kit * Brake Lever Weldment * Brake Band * Carbon Brush Cover Kit (contains 4 seal rings & 4 brush covers) * Sealing Ring * Bearing, Ball, Gearbox Side * Bearing, Ball, Brush Side * Carbon Brush Kit * Brake Bar * Drive Wheel P7 Scrubber Compound ** Drive Wheel Polyurethane Plate, Splash Guard Splash Guard Spindle Weldment Clamp, P Scr, Pan Phil M4 x Scr, Button Soc SS x Nut, Hex Machine SS Wsh, Flt SAE #6 * = Not Shown ** = Optional

16 14 RECOVERY SYSTEM 06-7

17 06-7 RECOVERY SYSTEM Scr, Pan Phil x Wsh, Flt SAE 1/ Scr, Pan Phil 1/4-20 x Scr, Pan Phil 5/16-18 x Scr, Pan Phil SS x Pin, Cover Pivot Cage, Float Gasket Ball, Float Clamp, Plastic Gasket, Vacuum Duct Clamp, Hose SAE # Clamp, Plastic Tank, Recovery Foam Cylinder Gasket Muffler, Top Panel Muffler, Bottom Panel Gasket Cover, Exhaust NOTE Foam Acoustical NOTE Cover, Vac Motor Lid, Recovery Tank Mount Bracket Foam, Sound NOTE Gasket Screen, Filter Filter Plate, Separator Lid, Vac Filter Mount, Vibration Drainhose Muffler, Vac Gasket Vac Hose Assy Hose, Vac 2.00 x 6.0 x NOTE Motor, Vac 36VDC (M5 / Advance only) * Carbon Brush Set Vac Motor Assy (M5 / Nilfisk only) * Carbon Brush Set Wire Rope, 9 Inch Scr, Pan Phil Plastite x Spring Clamp, P Scr, Pan Phil 1/4-20 x Foam, Sound NOTE Tie, Cable NOTE 2 * Harness Vac * = Not Shown

18 16 SCRUB SYSTEM

19 06-7 SCRUB SYSTEM Tee, Barb Leveler Knob Knob Hose, Spiral Wsh, Flt SAE 3/ Scr, Soc Set Loc 5/16-18 x Nut, Hex Nyl Loc 1/ Scr, Hex Hd Loc 1/4-20 x Pin, Cotter Hair Pin, Cotter Hair.0915 x # Nut, Hex Nyl Loc M6-1 (qty of 2 on 32 / BR 800s Trio EDS) Nut, Hex Nyl Loc SS M Scr, Hex SS M6-1 x 16mm 15# Scr, Hex M6-1 x 95mm (qty of 2 on 32 / BR 800s Trio EDS) Scr, Pan Phil Thd Form 1/4-20 x Nut, Hex Jam SS M Scr, Hex Thd to Hd SS M x 70mm Pin, Ring.50 x # Wsh, Bowed.375 x.578 x.060 (qty of 4 on 32 / BR 800s Trio EDS) Nut, Hex Jam 5/ Wsh, Flt Nylon.625 x x # Brush, Wash & Shine (28 ) NOTE 1 # Brush, Wash & Shine (32 / BR 800S Trio EDS) NOTE Clamp, Hose SAE # Kit, Splash Guard NOTE 2 * Harness, Brush Motor (Not Shown) * Harness, Scrub Brush Ground (Not Shown) Strap Pin Motor, 36 VDC, 1.25 HP, 3000 RPM Belt, Auto Tension Drive End Assy (items 54-61) Sheave, Poly-V Idler End Assy, Polished (items 49-53) Cover, Belt 35# Wheel (qty of 2 on 32 / BR 800s Trio EDS) Housing Weld t (28 ) # Housing Weld t (32 / BR 800s Trio EDS) Right Skirt Assy (see Skirt Assemblies) Left Skirt Assy (see Skirt Assemblies) Hopper Weld t (28 ) # Hopper Weld t (32 / BR 800s Trio EDS) Gasket 41 Intentionally Omitted Manifold, PVC 28 Adv (28 ) # Manifold, PVC 32 Adv (32 / BR 800s Trio EDS) Clamp, Hose SAE # Wsh, Flt SAE 1/ Caster Wheel Blade 47# Bushing (qty of 2 on 32 / BR 800s Trio EDS) Insulator, Terminal Bearing, Ball Idler Bearing Plate, Polished Hub, Aluminum Knob Washer, Bearing Scr, Soc Set Loc 1/4-20 x Key, Sq.19 x Bearing, Ball Bearing Plate Sheave, Poly-V Spindle, Stainless Spacer Washer, Bearing Wsh, Flt SS.260 x x Bushing.31 x.50 x Motor, 36 VDC,.75 HP, 1800 RPM 65 Intentionally Omitted 66 Intentionally Omitted 67 Intentionally Omitted 68 Intentionally Omitted Scr, Hex Thd Form 1/4-20 x Scr, Pan Phil Thd Form 1/4-20 x Actuator, Motor * Carbon Brush Kit * Limit Switch * Plastic Nut Nut Retainer Compression Spring Housing, Spring Compression Spring Nut Retainer * = Not Shown # = Revised or new since last update NOTE 1: Cannot use any other brushes. NOTE 2: Splash Guard Kit includes; Splash Guard and 4 panel clips.

20 18 SKIRT ASSEMBLIES

21 06-7 SKIRT ASSEMBLIES Left Skirt Assembly Right Skirt Assembly Nut, Hex Nyl Loc SS M6-1 NOTE Scr, Hex SS M6-1 x 25mm NOTE Scr, Hex SS M6-1 x 16mm NOTE Wsh, Flt SS.260 x x.074 NOTE Skirt Bracket Weld t (left skirt assembly) Skirt Bracket Weld t (right skirt assembly) Kit, Side Skirt NOTE Retainer, Skirt NOTE Scr, Hex Thd to Hd SS M6-1 x 20mm NOTE 1 NOTE 1: Quantities are for one skirt assembly only, there are two skirt assemblies on the machine. NOTE 2: Side Skirt Kit includes 4 side skirt blades (2 for each side skirt).

22 20 SOLUTION SYSTEM

23 SOLUTION SYSTEM Cap, Pipe GHT Nylon Washer, Rubber Boot, Battery Post Bushing,.27 x.37 x Barb Wsh, Flt SAE 5/ Wsh, Flt SAE # Reducer, Barb 9# Scr, Hex 5/16-18 x Scr, Pan Phil x Scr, Pan Phil 1/4-20 x Wsh, Flt SAE 1/ Scr, Pan Phil 1/4-20 x Scr, Pan Phil x Scr, Pan Phil x Scr, Flt Phil 1/4-20 x Scr, Pan Phil 5/16-18 x Nut, Hex Nyl Loc-Thin 1/ Scr, Pan Phil SS x Scr, Pan Phil 1/4-20 x Scr, Hex M x 16mm 22# Switch (S2) Ring, Ret Ext Type E Reinf Dia Nut, Hex Nyl Loc M Wsh, Flt.266 x.906 x Wsh, Flt.344 x.938 x Wsh, Flt SS.219 x.500 x.047/ Scr, Truss Phil-Blk x Spacer, Phenolic Spacer, Phenolic Clamp, Hose SAE # Clamp, Hose SAE # Hose, Spiral.50 Id x Hose,.75 Clear PVC Hose, Spiral.50 ID x 12 36# Seat NOTE Cover, Solution Tank, Assy Gasket Control Panel Assembly Strainer Clamp, Cable Tank Mount Bracket Prop Rod Solution Drain Hose * Harness, Main Charge Connector Assy Hinge Bracket Bar, Disconnect Tube Clamp, Cable Barb, 90 Elbow 3/4 x 1/2NPT Tee, Barb Bracket, Valve Valve, Solution Solution Tank Hose, Chem Resistant Brkt, Seat Weld t, Seat Mount Cover, Actuator Assembly, Detergent Inject Hose, PVC 1/4 x 3/ Hinge Harness, Chemical System Tee Assembly Pump, 24VDC Spacer Solenoid Valve Assy. 36V Charge Connector Assy Hose, Spiral.75 ID x Intentionally Omitted Clamp, P Clamp, P Tie, Cable Kit, Battery Connector (items 74-77) (Advance only) Cable, Battery Cable, Battery Tie, Cable Boot, Battery Post Scr, Pan Phil x.88 * Spacer, Battery (Advance only) Check Valve Assembly (items 79-83) Check Valve, 1/8 Barb, 125 PSI Hose, Chem Resistant, Check Valve, 1/8 Barb, 125 PSI Hose, Chem Resistant, Fitting, Y, Barb,.125 * = Not Shown # = Revised or new since last update NOTE 1: 2 hose - to chemical pump outlet. NOTE 2: 7 hose - locate near and point towards bottom of chemical pump compartment. NOTE 3: Seat is obsolete and replaced by in production. Order Seat kit to replace in the field.

24 22 SQUEEGEE ASSEMBLY 06-7

25 Squeegee Assy (28 ) Squeegee Assy (32 / BR 800s Trio EDS) Scr, Hex Hd SS 5/16-18 x Nut, Hex Nyl Loc-Thin SS 5/ Scr, Pan Phil SS 6-32 x Wsh, Flt SAE SS 5/ Nut, Hex Nyl Loc SS Nut, Wing SS 1/ Wheel Nut, Thumb Latch Assy Scr, Soc Shd.38 x 1.00 x 5/ Strap, Left Rear (28 ) # Strap, Left Rear (32 / BR 800s Trio EDS) Strap, Right Rear (28 ) # Strap, Right Rear (32 / BR 800s Trio EDS) Strap, Front (28 ) # Strap, Front (32 / BR 800s Trio EDS) Kit, Standard Squeegee Blade (28 ) # Kit, Standard Squeegee Blade (32 / BR 800s Trio EDS) Squeegee Tool, Cast (28 ) # Squeegee Tool, Cast (32 / BR 800s Trio EDS) 28 Squeegee Blade Kits **# Kit, Standard Squeegee Blade NOTE 1 ** Kit, Linatex Squeegee Blade NOTE 1 ** Kit, Neoprene Squeegee Blade NOTE 1 32 / BR 800S Trio EDS Squeegee Blade Kits **# Kit, Standard Squeegee Blade NOTE 1 ** Kit, Linatex Squeegee Blade NOTE 1 ** Kit, Neoprene Squeegee Blade NOTE 1 ** = Optional, Not Included SQUEEGEE ASSEMBLY # = Revised or new since last update NOTE 1: All squeegee blade kits include both front and rear squeegee blades.

26 24 SQUEEGEE SYSTEM 06-7

27 06-7 SQUEEGEE SYSTEM Nut, Hex Jam 5/ Pin, SPR.19 x Nut, Hex Nyl Loc-Thin 5/ Ring, Ret Ext Type E.38 Dia Nut, Wing SS 5/ Connecting Rod Pin Wheel Roller Spring, Extension Spacer, Squeegee Cable Knob, Squeegee Adjust Connecting Rod Pin, Cotter Hair Pin, Cot Hair.148 x Dia.62/ Clevis Pin.375 x Squeegee Mount Weld t Squeegee Assy (28 ) # Squeegee Assy (32 / BR 800S TRIO EDS) Rod End Lift Actuator, Squeegee (M2) Rod End, 5/ Rod End, 5/ Cable Assembly Rod End * = Not Shown # = Revised or new since last update

28 26 STEERING COLUMN ASSEMBLY

29 06-7 STEERING COLUMN ASSEMBLY Spring, Extension Plug, Cap Bearing, Flange Shaft, Lower Steering Bushing.32 x.50 x Chain, Roller Shaft, Upper Steering Sprocket Steering Wheel Cup Cap Wheel Adapter Tie, Cable (Not Shown) Tie, Cable (Not Shown) Wsh, Flt SAE 1/ Wsh, Flt SAE 5/ Scr, Soc Set Loc 3/8-16 x Wsh, Flt SAE 3/ Scr, Soc Set Loc 5/16-18 x Scr, Hex 1/4-20 x Nut, Hex Nyl Loc-Thin 1/ Nut, Hex Nyl Loc-Thin 1/ Scr, Hex Hd Loc 1/4-20 x Universal Joint Nut, Hex Jam SS 1/ Scr, Hex Thd To Hd M x 25mm Key, Wdf.75 x Ring, Ret Ext Type E 0.31 Dia Washer Flt.88 x 2.25 x Nut, Hex Nyl Loc M Scr, Hex SS M x 25mm Scr, Pan Phil Thd Form 1/4-20 x Rod Knob Shroud, Lower Column Shroud, Upper Column Steering Pawl Weldment Collar, Shaft 39# Deleted Intentionally Bearing, Flange.625 x.500 x Column, Upper Ratchet, Steering Column Lower Column Weldment # = Revised or new since last update

30 28 BATTERY WATERING SYSTEM 06-7

31 06-7 BATTERY WATERING SYSTEM Battery Watering System (items 1-2) (Standard on Advance Models) 1# Pump (Advance only) 2# Manifold Assembly (Advance only) # = Revised or new since last update

32 30 ON-BOARD CHARGER 06-7

33 06-7 ON-BOARD CHARGER # Kit, On-Board Charger (items 1-8) (Standard on Advance Models) TSBUS Instruction Sheet Nut, Hex Nyl Loc Nut, Hex Nyl Loc-Thin 1/ Spacer, Stepped Scr, Pan Phil 10-24x Scr, Pan Phil 10-24x Scr, Pan Phil 1/4-20 x Charger, 36V, 25AMP Weldment, Charger # = Revised or new since last update

34 32 WIRING DIAGRAM 06-7 RED F1 1 2 FUSE, 150 A. RED BT1 + - BATTERY, 36 Vdc BLK RED RED 1 2 CIRCUIT BREAKER, 45 AMP F2 1 2 BRN/YEL CIRCUIT BREAKER, 10 AMP H1 HORN BACKUP ALARM RED AWG WHT/BRN F3 K4 GRA/BLK CONTACTOR, VACUUM K5 WHT/BRN WHT/RED CONTACTOR, BRUSH L1 WHT/BRN 1 2 VIO/BLK VALVE, SOLENOID WHT/BRN BRN/YEL ORN/RED J4-1 HORN + GRN/BLK HORN - J4-7 WHT/BRN ACC J2-8 J2-7 B+ 2 S1 1 2 SW, SPST KEY J2-6 VIO/BLK B+ 1 VACUUM BRUSH SOLUTION J2-2 J2-1 J2-3 BRN J2-10 KEY SW. MODE J4-2 BRN/WHT M1 BRUSH LIFT ACTUATOR + M - RED/WHT J3-1 PUMP CHEMICAL M2 SQUEEGEE LIFT ACTUATOR + M - K2 1 2 CONTACT N.O. S3 1 2 S4 1 2 S2 1 2 SW, SEAT 1 3 R1 POT. 5K OHM H2 1 2 LAMP, HEAD H3 F4 1 2 D2 ZENER TVS S6 M M PUMP, SOLUTION ZENER TVS M4 + M - PUMP, ACCESSORY 1 2 LAMP, FLASHING M3 + M - MOTOR, WHEEL DRIVE 1 ORN/BLK 2 J3-4 THERMISTOR INTERFACE E1 CONTROL BOARD I -- VAC I -- BRUSH J4-6 J4-12 BLK/YEL J3-3 BRN WHT/BRN WHT/BRN WHT/GRN YEL/VIO BRN/RED WHT/BRN J3-2 STATUS J4-5 BLK BLK J4-11 J4-10 J4-4 SEAT SW. REV. FOR./REV. BRN/BLK SPEED LIMIT J2-9 POT. LO J4-9 POT. HI J4-3 B- 4 B- 3 B- 2 B- 1 J3-6 J3-5 J2-5 J4-8 OPTIONAL VIO/BLK J1-10 WHT/BRN J1-3 WHT/BRN E2 BLU/YEL J1-8 J1-9 RED/WHT CHEMICAL BLK/WHT J1-4 SYSTEM J1-6 M12 + M - BLU/GRA J1-1 D1 J1-7 J1-2 YEL VIO ORN ORN ORN/BLU RED/BLK BLU/BLK 2 FUSE, 1 A. BLK VIO GRA YEL WHT PIN 16 REV. ALARM ORN PIN 6-BRAKE- PIN 18-SPEED LIMIT PIN 3-POT. HI PIN 4-POT. WIPER PIN 13-POT. LO A1 SPEED CONTROLLER WHT PIN9-STATUS 1 PIN5-KSI M5 M 2 BRN/RED BLK MOTOR, VAC BRN/WHT B+ PIN 8-MODE B- RED/GRN M2 YEL/BLK M1 BLK BLK BLK BLK BLK BLK OPTIONAL M6 M RED K1 1 2 CONTACT N.O. BLU BLU MOTOR, VAC M7 + M - MOTOR, BRUSH M8 + M - YEL/VIO BLK BLK MOTOR, BRUSH BLU F5 1 2 FUSE, 5 A. S5 RED 2 1 RED SW, SIDE BROOM OPTIONAL -- ON CYLINDRICAL MACHINE ONLY M9 + M - MOTOR, SIDE BROOM BLK

35 06-7 WIRING DIAGRAM A Controller BT1 N/A Battery E Control Panel Assembly E Control Assembly F Fuse, 150 Amp F2# Circuit Breaker, 10 Amp (Control Circuit) F3# Circuit Breaker, 45 Amp (Wheel Drive) F4 N/A 1 Fuse, 1 Amp F5 Intentionally omitted H Horn / Backup Alarm H Headlight (optional) H Strobe Light (optional) K1# Contactor, Brush Motor K2# Contactor, Vac Motor L Solenoid Valve M Lift Actuator, Brush * Carbon Brush Kit * Limit Switch * Plastic Nut M Lift Actuator, Squeegee M Motor, Drive Wheel * Brake Bar * Brake Band * Carbon Brush Cover Kit (contains 4 seal rings & 4 brush covers) * Sealing Ring * Bearing, Ball, Gearbox Side * Bearing, Ball, Brush Side * Carbon Brush Kit * Drive Wheel P7 Scrubber Compound ** Drive Wheel Polyurethane M Motor, Pump (optional) M Motor, Vac 36VDC (Advance only) * Carbon Brush Set Vac Motor Assy (Nilfisk only) * Carbon Brush Set M Motor, Vac 36VDC (optional / Advance only) * Carbon Brush Set Vac Motor Assy (optional / Nilfisk only) * Carbon Brush Set M Motor, 36VDC, 1.25HP, 3000 RPM * Motor Brush/Spring Kit (for ) M Motor, 36VDC,.75HP, 1800 RPM * Motor Brush/Spring Kit (for ) M9 Intentionally omitted M Pump, Solution M Pump, Chemical R Potentiometer, 5K S Switch, Key * Key, Spare S2# Switch, Seat S3 N/A 1 Switch, Pump (part of M4) S4 N/A 1 Switch, Headlight (part of H2) S5 Intentionally omitted S6 N/A 1 Switch, Pump (part of M11) * = Not Shown ** = Optional # = Revised or new since last update

36 sk-advance.com 2008

Adhancer BR 800S TRIO EDS

Adhancer BR 800S TRIO EDS PARTS LIST Advance Models: 56316025 (R28-C), 56316026 (R32-C) Nilfisk Models: 56316038 (BR 800S TRIO EDS ) 7/06 revised 2/07 SECTION 13.9.1 06-7 TABLE OF CONTENTS Adhancer /