PARTS MANUAL. Version BURNISHER. R.P.S. Corporation Phone: P.O. Box 241 Fax: Racine, Wisconsin 53401

Transcription

1 Version 3.0 PARTS MANUAL 275 BURNISHER R.P.S. Corporation Phone: P.O. Box 241 Fax: Racine, Wisconsin 53401

2

3 Front Panel... 4 Front Wheel Assembly... 6 Front Wheel Drive... 8 Filter Door and Hinges Rear Axle Mount Burnisher Deck Burnisher Deck Actuator Pivot Steering Upright Central Command Machine Top Components Batteries and Covers TABLE OF CONTENTS TOC

4 4 Front Panel 4

5 Front Panel 5 5

6 6 Front Wheel Assembly 6

7 Front Wheel Assembly 7 7

8 8 Front Wheel Drive 8

9 Front Wheel Drive 9 9

10 10 Filter Door and Hinges 10

11 Filter Door and Hinges 11 11

12 12 Rear Axle Mount 12

13 Rear Axle Mount 13 13

14 14 27 Burnisher Deck

15 27 Burnisher Deck 15 Item Part No. Part Description Qty " BURNISHER SHROUD /4 NPT TO 2" OD ADAPTER SHROUD CURTAIN PAD DRIVER BELT BEARING HOUSING SINGLE PAD BURNISHER DECK MOTOR ADJUSTMENT BRACKET BELT GUARD DH " PULLEY " PULLEY DRIVE BEARING MOTOR COVER BURNISHER MOTOR 36V 2500 RPM 78 AMP PAD DRIVER DISK RISER " DRIVER PLATE LATERAL LIFTING BRACKET /8" ID, 1/2" OD, 1/4" LG BEARING /8" ID, 1/2" OD, 3/8" LG, FLANGE BEARING BRONZE THRUST BEARING,.50" ID X 1.0" OD X 1/16" TH /2" - 2" HOSE CUFF ADJUSTABLE LATERAL ARM A DRIVER LOCK B DRIVER SCREW IN PAD LOCK 1 25 H JNYL, 1/2"-13, 18-8 SS 1 26 H HCS 1/2"- 13 X 13" GRADE H HCS 5/16"- 18 X 1" SS 1 28 H HCS 3/8"- 16 X 1-1/4" SS 2 29 H HCS 3/8"- 16 X 1-3/4" SS 2 30 H HN 1/4"- 20 SS 4 31 H HN 3/8"-16 SS 4 32* H NYLOK 1/4"- 20 SS 6 33 H FW 1/4 ID X 5/8 OD SS 8 34 H FW 5/16 ID X 3/4 OD SS 1 35 H FW 3/8 ID X 7/8 OD SS 8 36 H LW 1/4" SS 4 37 H LW 5/16" SS 1 38 H LW 3/8" SS 2 39 H FNW 1/4 ID X 1.0 OD SS 4 40* H FHP 1/4"- 20 X 1" SS 6 41* H CB 1/4"- 20 X 5/8" S/S 4 42 H CB 1/4"- 20 X 1.0" SS 4 43 H CB 3/8"- 16 X 2.0" SS 1 44 H-NJ04C JNYL 1/4" - 20 SS 8 45 H-NJ06C JNYL 3/8-16 SS 2 46 SEE COMMON WEAR PARTS 27" BURNISHER PAD 1 15

16 16 Burnisher Deck 16

17 Burnisher Deck 17 17

18 18 Actuator Pivot 18

19 Actuator Pivot 19 19

20 20 Steering Upright 20

21 Steering Upright 21 21

22 22 Central Command 22

23 Central Command 23 23

24 24 Machine Top Components 24

25 Machine Top Components 25 25

26 26 Batteries and Covers

27 Batteries and Covers Item Part No. Part Description Qty 1 BATTERY JUMPER (4 GAUGE 24-1/2" LG) 2 2 BATTERY JUMPER (4 GAUGE 5-1/2" LG) BATTERY BOX FRAME WELDMENT SEAT LID HOOD BATTERY BOX SEAT L 16 H BATTERY 6 VOLT 395 AH PUSH-ON RUBBER GASKET 78" LG " SS HINGE " SS HINGE RECESSED HANDLE A ROLLER SEAT WITH ARM RESTS 1 15 H GROMMET 6 16 H HCS 3/4-10 X 8-1/ H NYLOK 3/4" H BATTERY BOOT H TERMINAL COVER H CB 1/4"- 20 X.5" SS 6 21 H-NJ04C JNYL 1/4" - 20 SS

28 STANDARD WARRANTY POLICY (RPS Corporation) RPS Corporation warrants its machines, parts and accessories to be free of manufacturer s defects for the periods specified below. Warranty will be granted at the sole discretion of RPS Corporation and is subject to final claim and parts review by R.P.S. Corporation and its vendors. This policy is effective January 1, 2010 and is subject to change on production units at a future date. COVERAGE, EXCLUSIONS AND LIMITATIONS: Coverage: All Models sold (Sweepers, Scrubbers, Burnishers) Parts: 36 months / 1,500 hours on Power On hour meter Labor: 12 months Travel: 3 months (150 mile maximum) Poly Tanks: 7 Years OEM Parts: 3 months Validity: Fully completed Machine Delivery Form (online or fax) is on record at RPS. Limitation: Warranty will begin on date of machine installation to end-user or 6 months after shipment from RPS Corp to the distributor if unsold at that time. This warranty includes all parts on the machine except normal wear parts. Some of these exceptions are: 1. Any Brooms, Brushes, Pads or Pad Drivers including Center Clip Retainers 2. Floor Seals, Wipers, Splash Curtains, Squeegees or Gaskets. 3. Filters, Dust Collection Bags or Screens 4. The safety pins design to fail in shear, which are a fail-safe device 5. Belts, Hoses or Tubing. 6. Caster Wheels, Tires or internal tire tubes. 7. Vacuum motors with evidence of water/foam passage or more than 450 hours 8. Lights (Strobe, Headlights or bulbs). 9. The Batteries (see below). NOT COVERED: Routine maintenance, adjustments or parts damaged from abuse, neglect, improper use of the machine, or lack of scheduled daily, weekly, monthly maintenance in accordance with our published PM Sheets. POLY TANKS: 7 Years Coverage against leakage due to manufacturer s defect in materials or workmanship. NOTE: Freight coverage for 3-Years under the parts section of warranty. BATTERIES: Warranted through battery manufacturer for One (1) Year (prorated) from the date of delivery. The battery manufacturer approves or denies the warranty coverage after analysis. We rely on solely on their review. NOTE NOT COVERED: Damage from lack of water, failure to use OEM charger, or non-distilled water.

29