SLAB SAW SERIES PARTS LIST

Transcription

1 SLAB SAW SERIES PARTS LIST MODELS: HP Part# 020 HP20 Part# HP2 Part# 0202 MADE IN USA MADE IN USA Revision Manual Part No Caution: Read all safety and operating instructions before using this equipment. This manual MUST accompany the equipment at all times. Barranca Diamond Products, Inc. Storm Parkway Torrance, CA 900 Toll-Free: (00) Phone: (0) 2-67 Fax: (0)

2 HP EXPLODED VIEW HP Slab Saw Part# BOM SUBSTITUTION TABLE SUB PART # DESCRIPTION HP-20 SLAB SAW.HP 6607 NUT, HEX, / SCREW, HEX HEAD, / - 20 X / 00 2 WASHER, FLAT, SAE, / WASHER, / SPLIT LOCK 092 WASHER, FENDER, /6 X NUT, HEX, WASHER, FLAT, SAE, /6 7 NUT, HEX, / WASHER, FLAT, SAE, / SCREW, HEX HD, / - 20 X / SCREW, / - 6 X -/2 HEX HEAD SCREW, HEX HD, CAP, /-6 X 2-/ 29 WASHER, #0 SPLIT LOCK 6 2

3 HP EXPLODED VIEW HP Slab Saw Part# 020 COLLAR, SHAFT, /" I.D. WASHER, FLAT, SAE, # SCREW, PAN HD, CAP, / - 20 X /2 2 7 SCREW, FLAT HEAD, /-20X /2 PHIL 2 SCREW, SOC HD, CAP, /6 - X / SCREW, PAN HD SELF TAP - 2 X / BLADE, " SCREW, / - 6 X - / HEX HD 9 22 BEARING, FLANGE, 2-BOLT, " SHAFT BUSHING, BRONZE FLANGED / X /2 X -/ GEAR, SPUR, BRONZE " OD, RAW 677-RW 2 NUT, WING FLANGE / WHEEL, CASTER X -/ WHEEL, CASTER X -/ NUT, HEX " -2 UNF WELDMENT, TANK GUARD, BELT 6600 ASSY, VISE, HP ASSY, HOOD 667 SHAFT, ARBOR, HP- 667 FLANGE, BLADE, " WINDOW, GUARD SWITCH, ASSEMBLY, ON/OFF CORD, POWER ASSEMBLY, ON/OFF SWITCH 660 LEVER, ON/OFF SWITCH 66 9 CHAIN, ON/OFF SWITCH GROMMET, ON/OFF LEVER 66 TABLE, ARBOR HOUSING WELDMENT, SPLASH HOOD 6669 COVER, GEAR BOX 6670 GAS SPRING 0LBS GAS SPRING 0 LBS, LOCKING LATCH, HOOD SCREW, FLAT HD, PHILLIPS 0-2 X /" GASKET, BEARING ASSEMBLY, DRIVE SHAFT SCREW, SOC HD, 0-2 X / 677 2

4 HP PARTS LIST HP Slab Saw Part#

5 HP PARTS LIST HP Slab Saw Part# 020 NUT, HEX, / PULLEY, 2-/ X / 66 WASHER, FLAT, SAE, / WASHER, FENDER, /6 X.0 0 SCREW, HEX HD, CAP, /6- X / WASHER, FLAT, SAE, /6 7 7 NUT, HEX, / SCREW, HEX HD, TAP, /-20X SCREW, HEX HD, /6-X-/ 90 0 TAG, SERIAL NUMBER, BLANK 700-RW MOTOR,.HP 60HZ 72R.P.M. PH BELT, V A PULLEY 6" OD. " BORE 677 PULLEY, STEP CONE,, X / BORE 67 PULLEY, V " X " BORE SPRING, EXTENSION CAP, FINISHING 6 2 MOUNT, MOTOR TENSIONER BRACKET SHAFT, TENSIONER PULLEY, ASSEMBLY RING, RETAINING /2" BELT, V A

6 HP EXPLODED VIEW HP/20 Assembly, Vise Part # WASHER, FLAT, SAE, / SCREW, HEX HD, CAP, /-20X 2-/ 6607 SCREW, /6- X / SOCKET HEAD SET 70 NUT, HEX, NYLK, / BUSHING, BRONZE FLANGED / X /2 X / ROD, FEED /- X -/ ROD, LENGTH SLIDE -/ X SHOE, CLUTCH COMPLETE 66 9 SUPPORT BAR, RIGHT SUPPORT BAR, LEFT 667 ASSEMBLY, VISE

7 HP PARTS LIST HP/20 Assembly, Hood Part # NUT, HEX, / WASHER, FLAT, SAE, / 9 SCREW, FLAT HD, /-20 X / 67 SCREW, PAN HEAD PHILLIPS 0-2 X /" 67 2 PULL HANDLE 60 6 WINDOW 66 7 GASKET, WINDOW 662 SCREW, PAN HD PHIL -2 X /" SEALING WELDMENT, HOOD CATCH, HOOD LATCH

8 HP2 HP2 Slab Saw Part# 0202 EXPLODED VIEW NUT, HEX, / NUT, HEX, /6-096 SCREW, HEX HEAD, / - 20 X / 00 2 WASHER, FLAT, SAE, / WASHER, / SPLIT LOCK WASHER, LOCK, SPLIT, / WASHER, FLAT, SAE, /6 7 6 NUT, HEX, / WASHER, FLAT, SAE, / SCREW, HEX HD, / - 20 X / SCREW, / - 6 X -/2 HEX HEAD 2 2 SCREW, HEX HD, CAP, /-6 X 2-/ 29 0

9 HP2 EXPLODED VIEW HP2 Slab Saw Part# 0202 COLLAR, SHAFT, /" I.D. SCREW, HEX HD, /6-X-/ 90 SCREW, FLAT HD, /-20 X / 67 6 SCREW, PAN HD, CAP, /-20 X / BLADE, 2 X.0, 0S 67 SCREW, FLAT HD, /-20X SCREW, /-6 X -/ HEX HD COLLAR, SHAFT / X / BEARING, FLANGE, 2-BOLT, " SHAFT BUSHING, BRONZE FLANGED / X /2 X -/ GEAR, SPUR, BRONZE " OD, RAW 677-RW 2 NUT, WING FLANGE / WHEEL, CASTER X -/ WHEEL, CASTER X -/ WELDMENT, TANK WELDMENT, BELT GUARD TABLE, ARBOR 69 0 NUT, HEX "-2UNF 60 SWITCH, ASSEMBLY, ON/OFF CORD, POWER ASSEMBLY, ON/OFF SWITCH 660 LEVER, ON/OFF SWITCH 66 CHAIN, ON/OFF SWITCH 662 GROMMET, ON/OFF LEVER 66 6 COVER, GEAR BOX LATCH, HOOD 669 SCREW, FLAT HD, PHILLIPS 0-2 X /" GASKET, BEARING ASSEMBLY, DRIVE SHAFT 6766 ASSY, VISE GASKET, GEAR BOX 677 SHAFT, ARBOR, HP FLANGE, BLADE, " ASSEMBLY, SPRING GAS LIFTING PROP, HOOD 66 7 ASSY, HOOD 720

10 HP2 PARTS LIST HP2 Slab Saw Part#

11 HP2 PARTS LIST HP2 Slab Saw Part# 0202 NUT, HEX, / PULLEY, 2-/ X / 66 WASHER, FLAT, SAE, / WASHER, FENDER, /6 X.0 0 SCREW, HEX HD, CAP, /6- X / WASHER, FLAT, SAE, /6 7 7 NUT, HEX, / SCREW, HEX HD, TAP, /-20X SCREW, HEX HD, /6-X-/ 90 0 TAG, SERIAL NUMBER, BLANK 700-RW MOTOR,.HP 60HZ 72R.P.M PH PULLEY 6" OD. " BORE 677 PULLEY, STEP CONE,, X / BORE 67 BELT, A SPRING, EXTENSION CAP, FINISHING MOUNT, MOTOR TENSIONER BRACKET SHAFT, TENSIONER PULLEY, ASSEMBLY RING, RETAINING /2" PULLEY, 9" X " BORE BELT, A7 709

12 HP2 EXPLODED VIEW HP2 Vise Assembly Part# SCALE 0.7 WASHER, FLAT, SAE, / SCREW, HEX HD, CAP, /-20X 2-/ 6607 SCREW, /6- X / SOCKET HEAD SET 70 NUT, HEX, NYLK, / BUSHING, BRONZE FLANGED / X /2 X / SHOE, CLUTCH COMPLETE 66 7 SUPPORT BAR, RIGHT 666 SUPPORT BAR, LEFT ROD, VISE TRAVEL ROD, THREADED FEED 6772 ASSEMBLY, VISE HP-2/0 72

13 HP2 PARTS LIST HP2 Assembly, Hood Part # WASHER, FLAT, SAE, / SCREW, HEX HD, /-20 X / 270 NUT, HEX, NYLK, / GUARD, SPLASH, NO LOGO 600-NL WELDMENT, HOOD WINDOW 66 7 GASKET, WINDOW 662 SCREW, PAN HD PHIL -2 X /" SEALING 6627

14 SLAB SAW SERIES WARRANTY BARRANCA DIAMOND LIMITED WARRANTY Please complete the warranty registration card and return. Any problems encountered should be directed to Barranca Diamond Customer Service department at (00) M-F am - pm PST. Barranca Diamond warrants to the original retail purchaser for a period of 90 days except as noted, from the date of purchase all products covered by this Warranty to be free of defects in materials and workmanship. This Warranty shall not apply to any parts that have been subjected to misuse or improper service, that had been damaged in transit or handling, or that have been altered or repaired by unauthorized representatives. This Warranty does not cover defects caused by or resulting from misuse, abuse, neglect or damage caused by accident or the failure to provide reasonable maintenance. This Warranty is void if the product or any of its individual components is altered or modified by the purchaser or if the product is used in a manner or with a blade not recommended by the manufacturer. Any claim arising under this Warranty must be submitted by the original purchaser within the warranty period specified above, and shall include proof of purchase. During said warranty period Barranca Diamond shall, at its option, either replace or repair, at no charge to the original purchaser, any parts or components that are found to be defective by Barranca Diamond. Barranca Diamond shall not be responsible for or obligated to pay for freight or other transportation related costs or expenses in connection with any defective products or components that are either returned to Barranca Diamond s facility or any authorized repair station and/or any replacement products or components that are shipped from Barranca Diamond pursuant to this Warranty. Parts and labor needed to maintain products and the replacement of components due to normal wear and tear are the purchaser s responsibility and are not covered by this Warranty. All products or components replaced under warranty become the property of the manufacturer. All replacement parts will be considered to be part of the original product and any warranty on such parts will expire coincidentally with the original Warranty. Barranca Diamond will pay for parts and labor in connection with warranty repairs conducted by Barranca Diamond or its authorized repair centers. Replacement part(s) installed by anyone else will be provided without a charge for such replacement part(s), but this Warranty will not apply to labor charges in connection therewith. IN NO EVENT SHALL ANY LIABILITY UNDER THIS WARRANTY EXCEED THE REPLACEMENT COST OF ANY DEFECTIVE PRODUCT OR COMPONENT THEREOF, AND BARRANCA DIAMOND SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OR FOR ANY OTHER DAMAGE OR LOSS NOT EXPRESSLY ASSUMED AS SET FORTH HEREIN. The foregoing constitutes an expressed warranty on the terms set forth above and is the only warranty or warranties applicable to the products it covers. All other warranties, including, without limitation, the implied warranty of merchantability and/or fitness for a particular purpose or use being denied. This limited warranty is expressly in lieu of all other warranties, whether expressed or implied. 6

15 SLAB SAW SERIES WARRANTY SPECIFICS APPLICABLE TO LIMITED WARRANTY OF DIAMOND BLADES AND CORE BITS Laser Welded Blade and Bit Warranty If the laser weld between the segment and the steel core or barrel fails during normal use, the blade or bit will be replaced free of charge. Blades and bits damaged due to careless or improper use are not covered under this warranty. Brazed Blade, Bit, and Cup Wheel Warranty If the brazed bond between the segment and the core, barrel, or cup fails within the first.00 of segment wear, the blade, bit, or cup will be replaced free of charge. Blades, bits, and cup wheels damaged due to careless or improper use are not covered under this warranty. Continuous Rim Blade Warranty If the bond between the rim and the core fails during normal use, the blade will be replaced free of charge. Blades and bits damaged due to careless or improper use are not covered under this warranty. Exclusions Barranca Diamond does not warrant the following components, which carry their own manufacturer s warranty for the indicated periods: Electric Motors Manufacturer s Warranty ABB Baldor: year Ryobi: Year Soga: Year Gas Engines Manufacturer s Warranty Honda: 2 years Engine Power Information Engine power ratings are calculated by the individual engine manufacturer and the rating method may vary among engine manufacturers. Barranca Diamond Products makes no claim, representation or Warranty as to the power rating of the engine on this equipment and disclaims any responsibility or liability of any kind whatsoever with respect to the accuracy or the engine power rating. Users are advised to consult the engine manufacturer s owner's manual and website for specific information regarding the engine power rating. 7

16 SLAB SAW SERIES SERVICE & WARRANTY REPLACEMENT PARTS Replacement parts for this tool may be ordered form your Barranca Diamond distributor or directly from Barranca Diamond. Please have the following information ready before calling: Model and serial number of the machine Date of purchase Description of parts being ordered (see attached parts list) RETURN MATERIALS PROCEDURE To expedite the service relative to the return of a product purchased through Barranca Diamond, please have the following information available: Model and serial number of the machine Date of purchase Distributor s name Then please call Barranca Diamond at (0) 2-67 or toll free at to obtain a Return Goods Authorization number (RGA) authorizing the return. Please Note: Ensure your item(s) are prepaid to the destination Return items must have been purchased within the previous twelve (2) months Follow the packaging instructions in the following section Be sure to include the RGA number, return address and your phone number on or within the return shipping box. PACKAGING INSTRUCTIONS Ship the saw using its plywood shipping crate. Use wood screws to fasten the baseboard to the /2 plywood crate bottom so as to secure it inside the shipping crate.

17 NOTES 9

18 Barranca Diamond Products, Inc. Storm Parkway Torrance, CA 900 Toll-Free: (00) 2-0 Phone: (0) 9-22 Fax: (0) 9-