CREWMAN. Dust Control 20 Battery Burnisher E
|
|
- Alexina Harrell
- 5 years ago
- Views:
Transcription
1 E CREWMAN Dust Control 20 Battery Burnisher NEW! Features highly effective dust control and sealed maintenance free AGM batteries, providing for a healthier environment.
2 CREWMAN Dust Control 20 Battery Burnisher Easy access to change floor pad Floating shroud prevents dust from escaping into the air Features an onboard charger and maintenance free batteries Betco s Crewman Dust Control Battery Burnisher delivers 2000 rpm s providing a high level and consistent burnish response. Featuring maintenance free batteries and an onboard charger, this machine is easy to operate and maintain. Its compact size and highly effective dust control system makes it perfect for use in schools, hospitals and retail environments. #E CREWMAN Dust Control 20 Battery Burnisher Technical Specifications Burnish path: 20 Pad size: 20 Motor: 2.5 hp Motor speed: 2000 rpm Pad driver: Flexible Center lock: Threaded Volts: 36-volt Battery: (3) Maintenance free, 12-volt, 140 ah, AGM Run time: Up to 2.5 hours Charger: Onboard, high frequency computer controlled Battery/hour meter: Yes, BDI computer controlled Key switch: Yes Main power light: Yes Safety switch: Yes Construction: Powder coated steel frame, plated steel handle Main Wheels: (2) 8 non-marking Rear Wheels: (3) 4 non-marking Length: 41 Width: 22 Height: 39 Weight: 326 lbs w/batteries Productivity: Up to 20,000 sq.ft/hr. Betco Product Recommendations: Prior to burnishing, use Betco One Step cleaner/restorer For daily burnishing, use a Betco Hi-Shine Light Pad Betco Warranty Express Backed by an industry leading warranty, Betco equipment is built to provide years of reliable service. Betco Warranty Express is a comprehensive product support program that offers extensive 10/3/1* parts and labor coverage on all machines. 888-GO BETCO *For 10/3/1 coverage details view our entire warranty policy at betco.com. Authorized Betco Distributor The Cleaning Edge 2007 Betco Corporation All Rights Reserved Brown Avenue Toledo, Ohio @betco.com Item #
3 2 CREWMAN DUST CONTROL BATTERY BURNISHER PARTS
4 CREWMAN DUST CONTROL BATTERY BURNISHER PARTS Part # Description ref# Part# NU# Description E E E E E E E E E E E E Felt Washer, 1/4 USS, Zinc Nut, 1/4-20 Nylon lock, Grade 5, Zinc Bumper, Polyurethane, Hardness A, Hemispherical, 0.70 W x 0.38 H Washer, Rubber 70 Dur. Neoprene, 1/2 ID x 1-3/8 OD x 1/8 T Spacer, 1/2 OD, 3/4 Length, 1/4 ID, Zinc, Steel Unthreaded Screw, 1/4-20 x 1-1/4, Gr. 5 Hex Head, Zinc Screw, Shoulder 5/16 x 7/8 L Steel, 1/4-20 Allen Head Bushing, Drill, Steel Press-Fit 5/16 ID x 1/2 OD x 1/4 L Washer, Rubber 70 Dur. Neoprene, ID x 11/16 OD x T Washer, Rubber 70 Dur. Neoprene, 1/2 ID x 1-1/4 OD x 1/4 T Grommet, 1/8 W x 1/2 Groove, Z-1060, 70 Dur. Neoprene 1 E Base Steel 2 E Plate Motor Mount 3 E Bracket, Dust Control Burnisher 4 E Bracket, Spring Adjustment 5 E Bolt, 5/16-18 X 3/4 6 E Nut, 5/16 Nylok 7 E Bolt, Shoulder 1/2 x 3/8 8 E Washer, 1/2 Nylon 9 E Nut, 3/8 Nylok Thin 10 E Wheel, Caster E Bolt, 1/4-20 X 3/8 with patch 12 E Washer, Flat 1/4 13 E Spring, 4 14 E Rod, Threaded 1/ in. 15 E Nut, 1/2-13 Jam 16 E Motor, 2.5 HP 36V 2000 rpm 17 E Washer, Flat 5/16 USS 18 E Washer, Lock 3/8 Split 19 E Bolt 3/8-16 x 3/4 Gr 5 20 E Shroud, Dust 21 E Brush, Extrusion, Skirt DC Burnisher 22 E Screw 1/4-20 x 3/4 23 E Gaskets, 3/4 x 1/4 x4 & E Washer, Lock 1/4 Split 25 E Plug, Plastic ratchet 5/16 26 E Pad Driver DC Burnisher 27 E Bolt 5/16 X 1 28 E Washer, Flat USS 5/16 29 E Washer, Lock 5/16 Split 30 E Cover Base, DC battery Burnisher Rev A 31 E Cover, Dust Bag DC Burnisher 32 E Bag, Dust, Cloth 33 E Nut, 1/4 x 20 Nylock 34 E Screw, 8-32 x 3/8 Ph Tr Hd 35 E Cover, Motor 36 E Knob, black, DC Burnisher 37 E Washer, Spring 1/2 in. 38 E Pad Holder, for replacement only 39 E Nut, 1/2 x 13 thin nylock 3
5 4 CREWMAN DUST CONTROL BATTERY BURNISHER PARTS
6 CREWMAN DUST CONTROL BATTERY BURNISHER PARTS ref# Part# NU# Description 1 E Washer, Lock 5/16 split 2 E Bolt, 5/16-18 x 1/2 hex zn gr 5 3 E Axle Cap, 1/2 in. 4 E Nut, 5/16-18 Nylok 5 E Bolt, 5/16-18 x 1 hex zn gr 5 6 E Bolt, 1/4-20 x 3/4 hex zn gr 5 7 E Washer, 3/4 I.D. x 1.25 O.D. x E Screw x 1/2 truss head phillips 9 E Wheel, 8 in. w/prec.bearing for 3/4 in. Axle 10 E Nut, Cap 1/2-13 Z/P 11 E Bolt, 5/16-18 x 1/2 hex zn gr 5 12 E Washer, 1/4 I.D. x 1 O.D. Z/P 13 E Nut, Hex 14 E Lanyard Style B - FPC-24N 15 E Hinge, 10 x E Washer, 1/4 Flat 17 E Battery Hold Down, 1 1/4 x 2 x 1/4 in. Black ABS 18 E Battery Hold Down, 2 x 4 x 1/4 in. Black ABS 19 E Nut, 1/ E Battery, 12 V 104 AH AGM EV31A-A 21 E Charger 36 v 15 amp SPE 22 E Handle Grip 23 E Frame, Battery Burnisher, DC Rev G. 24 E Cover, Top 25 E Axle,.75 in. x in. 26 E Bracket, Handle DC Brunisher, Battery 27 E Handle Tube 7/8 x E Rod, Threaded 1/2-13 x E Handle Tube Weldment 30 E Axle,.50 in. x in. 31 E Axle,.50 in. x 2.25 in. 32 E Collar, 1/2 in. I.D. CTC E Rod, Threaded 1/4-20 x 9 3/4 34 E F Wheel, 4 in Flat 35 E B Switch Box, Battery Burnisher 36 E Nut, 1/4-20 Nylok 37 E Wire Tie 38 E Gaskets, 3/4 x 1/4 x 4 5
7 CREWMAN DUST CONTROL BATTERY BURNISHER PARTS ref# part# NU# description 1 E Screw #6 x 1 2 E Screw, 1/4-20 X 1 3/4 3 E Spring 4 E Decal, safety 5 E Spring clip 6 E Screw, 1/4-20 X 1 7 E Screw M4 x 7mm Ph Zn 8 E Decal, Serial#/ made in USA 9 E Bolt, Brass 1/4-20 x 1/2, HX 25CHCSB 10 E Washer, Brass 1/4 25NWFLB E Nut, 1/4-20 HX Brass 12 E Contactor 36 v ETL10P 13 E Battery Discharge Ind. & Hour meter 14 E Key switch 15 E Circuit Breaker 50 amp 16 E Circuit Breaker 10 amp 17 E Meter 50 mv 1-50 amp, scale green E Shunt, 50 amp, 50 mv 19 E Pilot Light 36 v 20 E Safety Lock 21 E Plate, Switch 22 E Bracket, Hour Meter, switches 23 E A Switch 24 E B Trigger, switchbox 25 E B Cover, switchbox - black 6
8 part# NU# description E Wire 18 ga Red L /4 x 1/4 F tabs E Wire 18 ga Red L - 6 1/4 ring - 1/4 F tab E Wire 8 ga Red L /16 ring x #10 ring E Wire 8 ga Red L - 6 1/4 ring - #10 ring E Wire 8 ga Blk L - 8 5/16 x 5/16 ring term E Wire 8 ga Blk 24 5/16 x 5/16 ring term E Cable, 41 in. SJWT 18/3 E Cable, 46 in. SJWT 18/2 E Wire Harness Molex 8 pin ELECTRICAL SCHEMATIC Battery Burnisher Set Up 1. Remove the hardware from the Manual bag. 2. Raise the handle to the operating position and fasten with the two 1 x 5/16 bolts. 3. Tighten the other two bolts securely 4. Hook the lanyard on the 1 bolt on left side of the machine and fasten it with the Ny-Lok nut supplied. 5. Cut the bands, remove the wheel chocks, lean the machine back so that the small wheels are touching the pallet, roll the machine forward and lower the large wheels to the fl oor. Tip the machine up into the operating position. 6. The machine is equipped with the high speed burnishing pad that was used in testing the machine and is ready to run. Check to see that the center lock is tight 7. To change the pad when needed tip the machine back so it rests on the small wheels. See the operator s manual below for complete pad installation instructions. 8. Connect the positive + cable to the + post on the upper battery. 9. Remove the key from the manual bag and insert it in the key switch located under the battery box cover. 10. To operate the machine turn on the key switch, release the safety lock and squeeze the trigger on the handle. 11. The machine should be operated just at the top of the green on the meter. 12. There is a pressure adjustment knob under the cover, turn clockwise to remove pressure and lower the amp draw. Pad Installation Instructions 1. Use only 19 or 20 diameter pads. Light hair pads work well. 2. Turn the key switch off 3. Tip the machine all the way back 4. Remove the center lock 5. Center the pad on the pad holder, feel around the edges to be sure the pad is centered. 6. Install the pad center lock with the black gripper ring to hold the pad. Tighten it securely. 7. Tip the machine up and Press down on top of the motor to help seat the pad on the pad driver. 8. Operate the machine. 9. If you experience excessive vibration, check the pad for centering and for either lumps or dips in the outer edge of the pad. 7
9 Maintenance To maintain appearance - wipe the machine with a damp cloth after use. Warning - Unplug the machine charger before servicing The operator should check the following at 250 hour intervals: 1. Check the motor brushes for wear or excessive arcing. 2. Check the cord and electrical system. 3. Check the safety lockout on the trigger. 4. Check wheels and bearings. 5. Check the Dust shroud and brush seal. 6. Check the Dust bag before each use. Safety Read and understand the manual before operating this machine. Do not operate in explosive areas or use near fl ammable liquids or gases. Attach Charger to properly grounded outlet. Do not expose to rain, store indoors. Do not block or disconnect the safety lever. Unplug the machine before servicing. Do not put fi ngers under the pad or pad holder. Turn the machine off before installing or removing the pad. Use only with Hi Speed Burnishing pads. Specifications: Length - 41 in. Width - 22 in. Height - 38 in. Weight Lbs. Pad Speed RPM Pad Diameter - 20 in. Drive motor HP, 36v, 40 A, Batteries - 3 ea. 114 AH AGM BETCO US WARRANTY POLICY 10 Year Coverage Subject to the conditions stated below, Betco warrants parts and labor on rotationally molded polyethylene tanks/housings and injection molded vacuum head assemblies to be free from defects in materials and workmanship for a period of ten years to the original purchaser. 3 Year Coverage Subject to the conditions stated below, Betco warrants parts and labor on all other Betco components to be free from defects in materials and workmanship for a period of three years to the original purchaser. 1 Year Coverage Subject to the conditions stated below, Betco offers a limited warranty on parts and labor on the following equipment, parts and accessories to be free from defects in material and workmanship for a period of one year to the original purchaser. DM Series Vacuums: # , # Bac Pac Lite Vacuum: # FiberPRO Floor Dryer: # WORKMAN Series Vacuums: # , # , # , # CV100T Vacuum: # All Tools and Accessories/All Battery Chargers/All Batteries are pro-rated for 1 year. Allowable Travel Time Warranty Reimbursement Eligible equipment: All battery and propane powered equipment products. Warranty period: 90 days from date of sale to the original purchaser. A maximum 60 mile round trip at 44 cents per mile will be allowed for warranty consideration. Propane Machine Warranty: Honda engines are warranted by Honda for a period of 2 years against manufacturer defect. Kawasaki engines are warranted by Kawasaki for a period of 2 years against manufacturer defect. All other components (except wear items)* are warranted by Betco for a period of 3 years. *Wear items exempt from warranty consideration include but may not be limited to: power cords, transport wheels, vacuum bags, belts, squeegee blades, pad drivers, clutch plates, handle grips, fi lters, screens, throttle cables, brushes and carbon brushes. Subject to the conditions and exceptions stated in this warranty, Betco warrants the Betco products to be free from defects in material and workmanship, under normal use and service, for the periods listed under the warranty policy to the original purchaser. At any time during the warranty period, Betco will furnish replacement parts for the Betco products to the original purchaser. Such parts will be furnished and charged including transportation costs, to the original owner through any Betco authorized Service Distributor. If the original part is returned within the warranty policy period from date of delivery for inspection by Betco and is found to be defective, the owner will be credited for the cost of replacement parts plus shipping and handling. Replacement parts that have become defective through wear or abuse are not included in this warranty.this warranty does not apply to damage or defect caused by accident, misuse, negligence, fi re or to any Betco product which has been serviced or repaired by other than an authorized Betco Service Distributor or Betco factory personnel. This warranty is void if products are used for any purpose other than that which was intended. There are no other warranties expressed or implied. In no event shall Betco be liable for incidental or consequential damages or any damage to person or property. (Please note some states do not allow the exclusion or limitations for incidental and consequential damages.) 1001 Brown Avenue Toledo, Ohio Customer Service: 888-GO-BETCO Fax: Technical Service: E July09P
Electronic Service Manuals
Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions
More informationCREWMAN. Dust Control 20 Battery Burnisher. Operator and Parts Manual E
E8563-00 CREWMAN Dust Control 0 Battery Burnisher Operator and Parts Manual 00 Brown Avenue Toledo, Ohio 43607-07 Customer Service: 888-GO-BETCO Fax: 800-445-5056 Technical Service: 877-856-5954 www.betco.com
More information14 and 18" Upright Vacuum
E880-00 E8807-00 DM00T & DM800T and 8" Upright Vacuum Telescoping wand feature Onboard tool kit Optional HEPA fi lter available Operator and Parts Manual 00 Brown Avenue Toledo, Ohio 07-07 Customer Service:
More informationTable of Contents. Page Description
E2603-00 XT3 27 27 Battery Burnisher Operator s Manual Parts Schematic 2007 Betco Corporation. All Rights Reserved. 00 Brown Avenue Toledo, Ohio 43607-027 888-GO-BETCO www.betco.com Table of Contents Page
More information21 Battery Burnisher. Operator and Parts Manual E
E260-00 2 Battery Burnisher Operator and Parts Manual 00 Brown Avenue Toledo, Ohio 43607-027 Customer Service: 888-GO-BETCO Fax: 800-445-5056 Technical Service: 877-856-5954 www.betco.com TABLE OF CONTENTS
More informationCONTROL HANDLE GROUP ITEM SKU DESCRIPTION QTY 1 09129 BEARING, 3/4 NYLINER SI 2 2 35220 GASKET, MICRO SWITCH COVER 2 3 38275 HANDLE, CONTROL 1 4 E85358 1/4"- 20 Nyloc Nut 2 5 E81063 Nut, 5/16" - 18 4 6
More informationPARTS LIST ELECTRIC CHARGER 2500
PARTS LIST ELECTRIC CHARGER 2500 MOTOR ASSEMBLY ITEM PART NO. DESCRIPTION QTY 5298351 MOTOR 115 VOLT 2500 1 101 5991731 COMMUTATOR BRACKET COVER 1 102 5298441 COMMUTATOR BRACKET ASSEMBLY WITH BRUSH, BOARD,
More informationHSB21 Battery Burnisher
HSB21 Battery Burnisher OPERATION AND PARTS MANUAL Rev A 01/2003 HS2100 PARTS LIST Item No. Qty Part No. Description 1 1 001 Lower Body Housing 2 1 002 Battery Condition Meter 3 1 003 RPM Meter 4 1 004
More informationPARTS LIST ELECTRIC CHARGER 2500
PARTS LIST ELECTRIC CHARGER 2500 120 VOLT WIRE DIAGRAM SEE HANDLE ASSEMBLY FOR COMPONENT NUMBERS 240 VOLT SEE HANDLE ASSEMBLY FOR COMPONENT NUMBERS MOTOR ASSEMBLY ITEM PART NO. PART DESCRIPTION QTY. 5298001
More informationWRANGLER 2016 WHEEL DRIVE, PAD ASSIST & ELECTRIC MODELS
WRANGLER 2016 WHEEL DRIVE, PAD ASSIST & ELECTRIC MODELS BRUSH LIFT 101 9121960 3/8 EXTERNAL STAR LOCK WASHER 1 102 9122030 3/8-16 X 3/4 BUTTON HEAD SOCKET SCREW 1 103 2694261 CABLE 1 104 2391771 90 HOSE
More informationTABLE OF CONTENTS RECEIVING THE MACHINE... 3 TECHNICAL SPECIFICATIONS... 4 GENERAL SAFETY REGULATIONS... 5 MACHINE PREPARATION OPERATION
E83039-00 GENIE B APS 14 All Purpose Automatic Scrubber Operator and Parts Manual 1001 Brown Avenue Toledo, Ohio 43607-0127 Customer Service: 888-GO-BETCO Fax: 800-445-5056 Technical Service: 877-856-5954
More informationGENIE B APS. 14 All Purpose Automatic Scrubber. Operator and Parts Manual E
E83039-00 GENIE B APS 14 All Purpose Automatic Scrubber Operator and Parts Manual 1001 Brown Avenue Toledo, Ohio 43607-0127 Customer Service: 888-GO-BETCO Fax: 800-445-5056 Technical Service: 877-856-5954
More informationPARTS LIST WRANGLER 1710AB, 2010AB 120V AND 240V, TYPE F PLUG
PARTS LIST WRANGLER 1710AB, 2010AB 120V AND 240V, TYPE F PLUG CONTROL PANEL ASSEMBLY 101 1394151 ROUND POWER SWITCH 1 102 0693141 RUBBER SWITCH BOOT 2 103 9122465.516 I.D. X.813 O.D. X.027/.030 THICK FLAT
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393001 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
More informationPropane Powerered Floor Burnishers
Propane Powerered Floor Burnishers PB21-11 11hp Honda PB21-13 13hp Honda PB24-11 11hp Honda PB24-13 13hp Honda Operator's Manual Parts Schematic 2007 Betco Corporation. All Rights Reserved. 1001 Brown
More informationWRANGLER 1708AB, 2008AB
WRANGLER 1708AB, 2008AB WIRING DIAGRAM ITEM PART NO. DESCRIPTION QTY. 1 1393251 WIRE ASSEMBLY - CIRCUIT BREAKER TO BRUSH SWITCH 1 2 1393261 WIRE ASSEMBLY - CIRCUIT BREAKER TO VACUUM SWITCH 1 3 1393271
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393501 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
More information21, 24" Propane Burnishers
E2300-00 E0280-00 PREDATOR SERIES 2, 24" Propane Burnishers Operator and Parts Manual 00 Brown Avenue Toledo, Ohio 43607-027 Customer Service: 888-GO-BETCO Fax: 800-445-5056 Technical Service: 877-856-5954
More informationAutomatic Scrubber Chemicals WS17 Equipment Programs Process Betco Watchman 17 Automatic Scrubber The Betco Watchman series of automatic scrubbers bring a new dimension to cleaning maintenance. The Watchman
More informationPARTS LIST WRANGLER 2016 AE, AB, DB
PARTS LIST WRANGLER 2016 AE, AB, DB 1 ITEM PART NO. DESCRIPTION QTY. 101 2397081 MOTOR HOUSING 1 102 9120790 10 X 5/8 PAN HEAD PHILLIPS SHEET METAL SCREW [PACK OF 10] 4 103 2397991 WATER SOLENOID 24 VOLT
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB WITH SIDEKICK CHEMICAL DISPENSOR WITHOUT SIDEKICK CHEMICAL DISPENSOR 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393501 COMPLETE MOTOR ASSEMBLY 1 101 3391221
More informationPARTS LIST CHARGER 2020 AB CHARGER 2020 DB
PARTS LIST CHARGER 2020 AB CHARGER 2020 DB 1 ITEM PART NO. DESCRIPTION QTY. 101 6495511 CONTROL FRAME WELDMENT 1 102 9121390 11/32 I.D. X 11/16 O.D. X.051/.080 THICK SAE FLAT WASHER (5/16) 2 103 9121450
More informationMUSTANG 1500 BURNISHER
PARTS LIST MUSTANG 1500 BURNISHER NON-VAC-TRAC VAC-TRAC HANDLE ASSEMBLY ITEM PART NO. PART DESCRIPTION QTY. 5990189 COMPLETE HANDLE ASSEMBLY - 120 VOLT 1 5990199 COMPLETE HANDLE ASSEMBLY - 240 VOLT 1 101
More informationPARTS LIST WRANGLER 26-VS
PARTS LIST WRANGLER 26-VS ELECTRICAL WIRING ITEM PART NO. DESCRIPTION QTY. 1 2694161 UPPER WIRING HARNESS 1 2 2694171 LOWER WIRING HARNESS 1 3 2490811 BRUSH MOTOR WIRE ASSEMBLY 1 4 2396141 WIRE ASSEMBLY
More informationPARTS LIST CHARGER 2025 AB CHARGER 2025 DB
PARTS LIST CHARGER 2025 AB CHARGER 2025 DB 1 ITEM PART NO. DESCRIPTION QTY. 101 6495511 CONTROL FRAME WELDMENT 1 102 9121390 11/32 I.D. X 11/16 O.D. X.051/.080 THICK SAE FLAT WASHER (5/16) - PACK OF 10
More information26 Automatic Scrubber with Traction Drive
E87026-00 E88064-00 STEALTH ASD26BT 26 Automatic Scrubber with Traction Drive Operator and Parts Manual 1001 Brown Avenue Toledo, Ohio 43607-0127 Customer Service: 888-GO-BETCO Fax: 800-445-5056 Technical
More informationMUSTANG 1500 BURNISHER
PARTS LIST MUSTANG 1500 BURNISHER NON-VAC-TRAC VAC-TRAC HANDLE ASSEMBLY ITEM PART NO. PART DESCRIPTION QTY. 5990189 COMPLETE HANDLE ASSEMBLY - 120 VOLT 1 5990199 COMPLETE HANDLE ASSEMBLY - 240 VOLT 1 101
More informationPropane Powerered Floor Burnishers
Propane Powerered Floor Burnishers Optima QT 21 17hp Kawasaki Optima QT 24 17hp Kawasaki Optima QT 28 17hp Kawasaki Operator's Manual Parts Schematic 2007 Betco Corporation. All Rights Reserved. 1001 Brown
More informationFOR YOUR CONVENIENCE, RECORD THE FOLLOWING IMPORTANT INFORMATION MODEL: SERIAL NUMBER: DATE PURCHASED: PURCHASED FROM:
FOR YOUR CONVENIENCE, RECORD THE FOLLOWING IMPORTANT INFORMATION MODEL: SERIAL NUMBER: DATE PURCHASED: PURCHASED FROM: BASIC TROUBLESHOOTING PROBLEM CAUSE SOLUTION Machine does not work Power switch
More informationPARTS LIST CHARGER 2022 ABLT
PARTS LIST CHARGER 2022 ABLT ITEM PART NO. PART DESCRIPTION QTY. 101 5990731 SPRING CLIP PAD HOLDER SET - INCLUDES: 1 101A 9120205 8 X 1/2 PAN HEAD PHILLIPS SHEET METAL SCREW - PACK OF 3 3 102 9121490
More informationPARTS LIST ELECTRIC CHARGER 1500
PARTS LIST ELECTRIC CHARGER 1500 HANDLE ASSEMBLY - 5293999 120 VOLT - 75 FOOT CORD HANDLE ASSEMBLY - 5296609-240 VOLT - 75 FOOT SHUKO CORD ITEM PART NO. PART DESCRIPTION QTY. 102 5391873 COVER - SWITCH
More informationWRANGLER 1708CB, 2008CB
WRANGLER 1708CB, 2008CB WIRING DIAGRAM ITEM PART NO. DESCRIPTION QTY. 1 1393251 WIRE ASSEMBLY - CIRCUIT BREAKER TO BRUSH SWITCH 1 2 1393261 WIRE ASSEMBLY - CIRCUIT BREAKER TO VACUUM SWITCH 1 3 1393271
More informationPARTS LIST WARHORSE 27 & 27 VAC-TRAC
PARTS LIST WARHORSE 27 & 27 VAC-TRAC PERFORMER WIRING DIAGRAM 248 PERFORMER SERVICE PARTS NSS NO. ONAN NO. DESCRIPTION 6590941 110-3709 GASKET - VALVE COVER 6590951 154-2495 GASKET - INTAKE MANIFOLD 6590961
More informationPARTS LIST ELECTRIC CHARGER 1500
PARTS LIST ELECTRIC CHARGER 1500 HANDLE ASSEMBLY - 5293999 120 VOLT - 75 FOOT CORD HANDLE ASSEMBLY - 5296609-240 VOLT - 75 FOOT SHUKO CORD ITEM PART NO. PART DESCRIPTION QTY. 101 5092322 BLACK VINYL COVER
More informationPARTS LIST ELECTRIC CHARGER 1500
PARTS LIST ELECTRIC CHARGER 1500 WIRE DIAGRAM 120 VOLT SEE HANDLE ASSEMBLY FOR COMPONENT NUMBERS 240 VOLT SEE HANDLE ASSEMBLY FOR COMPONENT NUMBERS MOTOR ASSEMBLY ITEM PART NO. PART DESCRIPTION QTY. 5293971
More informationPARTS LIST CHAMP 2929
PARTS LIST CHAMP 2929 1 ITEM PART NO. DESCRIPTION QTY. 101 9122343 3/8-16 X 2 HEX HEAD FULL THREADED BOLT 3 102 9122100 3/8 SPLIT LOCK WASHER 3 103 9121400 3/8 I.D. X 7/8 O.D. X.064/.104 THICK WROUGHT
More informationPARTS LIST CHARGER 2716 DB PLUS
PARTS LIST CHARGER 2716 DB PLUS BASE ITEM PART NO. DESCRIPTION QTY. 101 6495511 CONTROL FRAME WELDMENT 1 102 9121390 11/32 I.D. X 11/16 O.D. X.051/.080 THICK SAE FLAT WASHER (5/16) 2 103 9121450 5/16-18
More informationPARTS LIST MAVERICK 300 STANDARD SPEED FLOOR MACHINE
PARTS LIST MAVERICK 300 STANDARD SPEED FLOOR MACHINE WIRE DIAGRAM - VARIABLE SPEED 120 VOLT SEE HANDLE ASSEMBLY FOR COMPONENT NUMBERS 240 VOLT SEE HANDLE ASSEMBLY FOR COMPONENT NUMBERS WIRE DIAGRAM - SINGLE
More informationWRANGLER 1708CE, 2008CE
WRANGLER 1708CE, 2008CE CONTROL PANEL ASSEMBLY ITEM PART NO. DESCRIPTION QTY. 101 5490161 FULLY INSULATED FEMALE TERMINAL 14-16 2 102 0693141 RUBBER SWITCH BOOT 2 103 0691851 1/2 INTERNAL STAR LOCK WASHER
More information21, 24", 27" Propane Burnishers
E237-00 E239-00 E232-00 OPTIMA QT SERIES 2, 24", 27" Propane Burnishers Optional Emissions Kit Available Operator and Parts Manual 00 Brown Avenue Toledo, Ohio 43607-027 Customer Service: 888-GO-BETCO
More information21, 24", 27" Propane Burnishers
E237-00 E239-00 E232-00 OPTIMA QT SERIES 2, 24", 27" Propane Burnishers Optional Emissions Kit Available Operator and Parts Manual 00 Brown Avenue Toledo, Ohio 43607-027 Customer Service: 888-GO-BETCO
More informationTORNADO ILLUSTRATED PARTS 20" FLOORKEEPER EZ BRUSH DRIVE (SERIES C) CATALOG NO , 99105A & 99105B
TORNADO INDUSTRIES 7401 W. LAWRENCE AVENUE CHICAGO, IL 60706 (708) 867-5100 FAX (708) 867-6968 www.tornadovac.com TORNADO 20" FLOORKEEPER EZ BRUSH DRIVE (SERIES C) CATALOG NO. 99105, 99105A & 99105B ILLUSTRATED
More informationPARTS LIST CHARGER 2022 DB
PARTS LIST CHARGER 2022 DB SAVE THESE INSTRUCTIONS CHASSIS AND DRIVE ASSEMBLY 101 2694069 #40 ROLLER CHAIN 57 LINKS WITH MASTER 1 2694081 #40 ROLLER CHAIN 57 LINKS NO MASTER 1 2795211 LINK MASTER #40 CHAIN
More information415DS AUTO DISCHARGE WET SOLUTION VAC PARTS MANUAL REV A
415DS AUTO DISCHARGE WET SOLUTION VAC PARTS MANUAL REV A October 2002 415DS-AUTO DISCH WET SOLUTION VAC-HEAD ASSY 415DS-AUTO DISCH WET SOLUTION VAC-HEAD ASSY 1 S81006 SCREW, (PHILLIPS) M5 X 20 6 2 S81150
More informationMilestone Equipment & Supplies Recommended Tornado-Karcher Parts Inventory
Milestone Equipment & Supplies 630-247-0801 www.mestornado.com Recommended Tornado-Karcher Parts Inventory FLOOR MACHINES ES SERIES 01608 Ring-hog 2 03470 Ring, retaining 2 07536 Screw 2 06685 Switch,
More informationLumina 20 Battery Burnisher. Model: M26036QP M26036CE OPERATION SERVICE PARTS CARE. Revised 8/04
Lumina 20 Battery Burnisher Model: M26036QP M26036CE OPERATION SERVICE PARTS CARE Revised 8/04 Contents Illustration, Spare Parts, Operation, and Service Precautions... 1 Operating Instructions... 2 Inspection...
More informationAUTOMATIC BURNISHER MODEL FURY 21 HSB
AUTOMATIC BURNISHER MODEL FURY 21 HSB INTRODUCTION OPERATING & MAINTENANCE INSTRUCTIONS This operator s book has important information for the use and safe operation of this machine. Read this book carefully
More informationLumina 28 Traction Drive Model: Battery Burnisher M28036TDQP OPERATION SERVICE PARTS CARE
Lumina 28 Traction Drive Model: Battery Burnisher M28036TDQP OPERATION SERVICE PARTS CARE Table of Contents IMPORTANT SAFETY INSTRUCTIONS...1 OPERATING INSTRUCTIONS...2 INSPECTION...2 ELECTRICAL...2 BATTERIES...2
More informationPARTS LIST CHAMP 2929 WITHOUT SIDEKICK CHEMICAL DISPENSOR WITH SIDEKICK CHEMICAL DISPENSOR
PARTS LIST CHAMP 2929 WITHOUT SIDEKICK CHEMICAL DISPENSOR WITH SIDEKICK CHEMICAL DISPENSOR 1 ITEM PART NO. DESCRIPTION QTY. 101 9122343 3/8-16 X 2 HEX HEAD FULL THREADED BOLT - PACK OF 1 3 102 9122100
More informationE OPTIMA QT SERIES
E2309-00 E23-00 E234-00 OPTIMA QT SERIES 2, 24", 27" Propane Burnishers Optional Emissions Kit Available Scan this QR code to view operator training video Operator and Parts Manual 00 Brown Avenue Toledo,
More informationPARTS LIST CHAMP 3329 RB
PARTS LIST CHAMP 3329 RB 1 ITEM PART NO. DESCRIPTION QTY. 101 9122343 3/8-16 X 2 HEX HEAD FULL THREADED BOLT - PACK OF 1 3 102 9122100 3/8 SPLIT LOCK WASHER - PACK OF 10 3 103 9121400 3/8 I.D. X 7/8 O.D.
More informationWARHORSE 21 & 20 VAC-TRAC
WARHORSE 21 & 20 VAC-TRAC ELITE WIRING DIAGRAM 124 ELITE SERVICE PARTS NSS NO. ONAN NO. DESCRIPTION 6590021 308-385 KEY SWITCH ONAN 6593191 515-0295 KEY 6591661 155-2378 GASKET 6591741 338-3646 HARNESS
More informationParts Manual E 24 Walk-Behind Scrubber
Parts Manual E 24 Walk-Behind Scrubber 2 Table Of Contents Chassis Part I...4 Lift Pedal Assembly...6 Chassis Part II...8 Traction Drive...10 Chassis Part III...12 Water Supply Part I...14 Recovery Tank
More informationPARTS LIST PONY 20 SCA
PARTS LIST PONY 20 SCA WIRING DIAGRAM PART NO. PART DESCRIPTION 4990601 GEARMOTOR - 120 VOLT 4990581 GEARMOTOR - 240 VOLT 4890391 VAC MOTOR - 115 VOLT 4891251 VAC MOTOR - 240 VOLT 4991321 BRUSH MOTOR -
More informationPARTS MANUAL. Version BURNISHER. R.P.S. Corporation Phone: P.O. Box 241 Fax: Racine, Wisconsin 53401
Version 3.0 PARTS MANUAL 275 BURNISHER R.P.S. Corporation Phone: 1-800-450-9824 P.O. Box 241 Fax: 1-866-632-6961 Racine, Wisconsin 53401 Front Panel... 4 Front Wheel Assembly... 6 Front Wheel Drive...
More informationPARTS LIST CHAMP ZS 35
PARTS LIST CHAMP ZS 35 1 BATTERY INSTALLATION INSTRUCTIONS WET STORAGE BATTERY CORROSIVE ACID * CONTAINS ACID, AVOID CONTACT. * ANTIDOTE: * EYES - FLUSH WITH WATER 15 MINUTES. * INTERNAL - DRINK WATER
More informationAdvolution 2710 UHR
Advolution 2710 UHR 70-1700 PARTS LIST Advance MODELS 56422000, 56422002, 56422184 Nilfisk MODEL 56422001 3/06 revised 8/08 SECTION 5.9.1 06-3 TABLE OF CONTENTS Advolution 2710 / UHR 70-1700 D 5.9.1 1
More information99125B - Series N Brush Lift Assembly Model :99125B 20" EZ Floorkeeper (w/ 4-6 V Batteries) - Series N
995B - Series N Brush Lift Assembly Model :995B 0" EZ Floorkeeper (w/ - V Batteries) - Series N Page- 5 7 9 0 5 7 9 5 7 9 0 5 7 9 0 070 RETAINING RING PIN 9 WASHER 907 WELDMENT BRUSH LIFT PEDAL 900 PEDAL
More informationParts Manual H26 WALK BEHIND SCRUBBER
Parts Manual H26 WALK BEHIND SCRUBBER Introduction Preface Please be advised explicitly that we cannot accept any legal issues out of the contents of this manual. If repair work has to be performed make
More informationWhirlamatic UHSB 20 Whirlamatic UHSBD 20
Whirlamatic UHSB 20 Whirlamatic UHSBD 20 PARTS LIST Advance MODELS 56393500 (UHSB 20), 56393930 (UHSB 20) 56393600 (UHSBD 20 / OBSOLETE) 1/91 revised 12/05 91-1 05-3 TABLE OF CONTENTS 1 DESCRIPTION PAGE
More informationPARTS LIST CHARGER 2717 DB
PARTS LIST CHARGER 2717 DB ITEM PART NO. PART DESCRIPTION QTY. 101 6498051 AXLE / PIVOT MOUNT 2 102 9122260 3/8-16 X 1 HEX BOLT - PACK OF 2 4 103 9122100 3/8 SPLIT LOCK WASHER - PACK OF 10 4 104 9122 180
More informationAdvolution 2710 PARTS LIST MODELS , , /06 revised 5/09 FORM NO
PARTS LIST MODELS 56422000, 56422002, 56422184 3/06 revised 5/09 06-3 09-5 TABLE OF CONTENTS 1 DESCRIPTION PAGE Body System... 2-3 Chassis System... 4-5 Decal System... 6-7 Electrical System... 8-9 Pad
More informationSTEALTH ASD26BT. 26 Automatic Scrubber with Traction Drive. Operator and Parts Manual E E
E87026-00 E88064-00 STEALTH ASD26BT 26 Automatic Scrubber with Traction Drive Operator and Parts Manual 400 Van Camp Bowling Green, Ohio 43402 Customer Service: 888-GO-BETCO Fax: 800-445-5056 Technical
More informationWhirlamatic VS 20 PARTS LIST Advance MODEL
Whirlamatic VS 20 PARTS LIST Advance MODEL 56393705 10/93 revised 2/03 93-10 TABLE OF CONTENTS 00-9 Whirlamatic VS 20 3 DESCRIPTION PAGE CHASSIS AND SHROUD... 4-5 HANDLE ASSEMBLY... 6-7 PAD DRIVE ASSEMBLY...8-9
More informationPARTS LIST COLT COLT HEPA
PARTS LIST COLT 800-1250 - 1450 COLT HEPA - 1250-1450 MOTOR / LID ITEM PART NO. PART DESCRIPTION QTY. 101 0891201 TOP COVER 1 102 0294341 TOP MOTOR SEAL 1 103 0299661 STRAIN RELIEF CORD CLAMP 1 104 0891131
More informationBPS Battery Powered Sweeper. Operator and Parts Manual E89001P
E89001P BPS28 28 Battery Powered Sweeper Operator and Parts Manual 1001 Brown Avenue Toledo, Ohio 43607-0127 Customer Service: 888-GO-BETCO Fax: 800-445-5056 Technical Service: 877-856-5954 www.betco.com
More informationPARTS LIST CHARGER 2717 AB
PARTS LIST CHARGER 2717 AB ITEM PART NO. PART DESCRIPTION QTY. 101 6497261 AXLE / PIVOT MOUNT 2 102 6495891 PIVOT 2 103 2691181 PIVOT SPACER, STABILIZER BAR 4 104 9122180 13/32 X 13/16 X.051 THICK WASHER
More informationPARTS LIST CHARGER 2022 AB
PARTS LIST CHARGER 2022 AB ITEM PART NO. PART DESCRIPTION QTY. 101 6497261 AXLE / PIVOT MOUNT 2 102 6495891 PIVOT 1 103 2691181 PIVOT SPACER, STABILIZER BAR 2 104 9122180 13/32 X 13/16 X.051 THICK WASHER
More informationParts Catalog. S-Series Slicer Standard Automatic Frozen Option S13A. Model:
, 08 995 ECN 0 Parts Catalog S3A S-Series Slicer Standard Automatic Frozen Option Model: S3A 0/09/08 Rev. W IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL
More informationPARTS LIST GALAXY FLOOR MACHINE
PARTS LIST GALAXY FLOOR MACHINE HANDLE ASSEMBLY 120 VOLT ITEM PART NO. DESCRIPTION QTY 101 0393351 SWITCH BOX COVER 1 102 0393531 DECAL 1 103 0393441 HANDLE GRIP 2 104 0393401 SWITCH LEVER 1 105 0393521
More informationPROTEUS 26BA 26 Automatic Scrubber Parts List
PROTEUS 26BA 26 Automatic Scrubber Parts List The contents of this manual are based on the latest product information available at the time of publication. Pacific reserves the right to make changes or
More informationBIG BERTHA. 30" Extreme Strip and Scrub Machine. Operator and Parts Manual E
E2327-00 BIG BERTHA XSM30 XSM 30" Extreme Strip and Scrub Machine Operator and Parts Manual 00 Brown Avenue Toledo, Ohio 43607-027 Customer Service: 888-GO-BETCO Fax: 800-445-5056 Technical Service: 877-856-5954
More informationSelectScrub 17. PARTS LIST Kent MODEL This parts list is for machines after serial number /99 revised 8/02 FORM NO.
SelectScrub PARTS LIST Kent MODEL 530300 This parts list is for machines after serial number 959 3/99 revised /0 99-3 TABLE OF CONTENTS SelectScrub DESCRIPTION PAGE Chassis System... -3 Handle System...
More informationParts Catalog. S-Series Slicer Standard Automatic S13A. Model:
, 08 99508 ECN 0 Parts Catalog S-Series Slicer Standard Automatic Model: SA SA 0/5/8/08 Rev. Y IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
More informationPARTS LIST CHAMP 2929 WITHOUT SIDEKICK CHEMICAL DISPENSOR WITH SIDEKICK CHEMICAL DISPENSOR
PARTS LIST CHAMP 2929 WITHOUT SIDEKICK CHEMICAL DISPENSOR WITH SIDEKICK CHEMICAL DISPENSOR 1 ITEM PART NO. DESCRIPTION QTY. 101 9122300 3/8-16 X 1 1/4 HEX BOLT - PACK OF 2 2 102 9122100 3/8 SPLIT LOCK
More informationPARTS LIST CHARGER 2716 DB PLUS
PARTS LIST CHARGER 2716 DB PLUS BASE ITEM PART NO. DESCRIPTION QTY. 101 6495511 CONTROL FRAME WELDMENT 1 102 9121390 11/32 I.D. X 11/16 O.D. X.051/.080 THICK SAE FLAT WASHER (5/16) 2 103 9121450 5/16-18
More informationPARTS BOOK THOROUGHBRED STANDARD SPEED FLOOR MACHINE
PARTS BOOK THOROUGHBRED STANDARD SPEED FLOOR MACHINE HANDLE ASSEMBLY ITEM PART NO. PART DESCRIPTION QTY. 5090579 HANDLE ASSEMBLY - 120 VOLT - 1 H.P., 1 1/2 H.P. AND 2 H.P. 1 5092579 HANDLE ASSEMBLY - 240
More informationParts Manual Rev. B RZT48 /
115 91 36-2 Rev. B Parts Manual RZT48 / 96 62001-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of 10%
More informationParts Catalog. S-Series Slicer Automatic. Model:
, 07 99509 ECN 077 Parts Catalog S-Series Slicer Automatic Model: SGA SGA 05/08/07 Rev. J IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE
More informationNSS STANDARD SPEED FLOOR MACHINES
PARTS LIST NSS STANDARD SPEED FLOOR MACHINES MUSTANG 300 DS MUSTANG 17 & 20 WIRE DIAGRAM - MUSTANG 300 DS 120 VOLT SEE HANDLE ASSEMBLY FOR COMPONENT NUMBERS 240 VOLT SEE HANDLE ASSEMBLY FOR COMPONENT NUMBERS
More informationSK20 AUTOMATIC SCRUBBER ENTER
SK20 AUTOMATIC SCRUBBER ENTER PARTS MANUAL REV A August 2002 Click on icon to return to this page. Back 1 page SK 20 AUTOMATIC SCRUBBER CODE: PF02240NTG-4 aa SN from 01B600 1 PL1011 CONTROL PANEL 2 PL1001
More informationParts Catalog. S-Series Slicer Standard Automatic Frozen Option S13A. Model:
, 07 995 ECN 077 Parts Catalog SA S-Series Slicer Standard Automatic Frozen Option Model: SA 05/08/07 Rev. H IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL
More informationParts Manual Rev. A RZT54 /
115 93 37-27 Rev. A Parts Manual RZT54 / 967 672101-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of
More informationPARTS LIST CHAMP 3329 RB WITHOUT SIDEKICK CHEMICAL METERING WITH SIDEKICK CHEMICAL METERING
PARTS LIST CHAMP 3329 RB WITHOUT SIDEKICK CHEMICAL METERING WITH SIDEKICK CHEMICAL METERING 1 ITEM PART NO. DESCRIPTION QTY. 101 9124000 M10-1.5 X 50 HEX HEAD BOLT - PACK OF 2 2 102 9124003 M10 SPLIT LOCK
More informationConvertamatic 285LX Hydro-Retriever 285HD Lynx 285
Convertamatic 285LX Hydro-Retriever 285HD Lynx 285 PARTS LIST Advance MODELS 56391007(285LX) 56391008(285HD & Lynx) All models covered in this manual are Obsolete. This parts list is for machines after
More informationRHINO RIDER-SWEEPER SCRUBBER ENTER
RIDER-SWEEPER SCRUBBER ENTER PARTS MANUAL REV A August 2002 Click on icon to return to this page. Back 1 page CODE: PF03046NTG-2 aa SN from 00E200 CODE: PF03046NTG-2 aa SN from 00E200 1 PL1045 WHEEL 2
More informationElectronic Service Manuals
Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions
More informationLumina 20 Battery Burnisher. Model: M26036QP M26036CE OPERATION SERVICE PARTS CARE. Revised 7/02
Lumina 20 Battery Burnisher Model: M26036QP M26036CE OPERATION SERVICE PARTS CARE Revised 7/02 Contents Illustration, Spare Parts, Operation, and Service Precautions... 1 Operating Instructions... 2 Inspection...
More informationParts Catalog. S-Series Slicer Standard Automatic S13A. Model:
, 07 99508 ECN 06 Parts Catalog S-Series Slicer Standard Automatic Model: SA SA //07 Rev. L IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
More informationDRS21BT STEALTH. 21 MicroRider Automatic Scrubber. Parts and Maintenance Catalog E E E
E29961-00 E29962-00 E29963-00 STEALTH DRS21BT 21 MicroRider Automatic Scrubber Parts and Maintenance Catalog 1001 Brown Avenue Toledo, Ohio 43607-0127 Customer Service: 888-GO-BETCO Fax: 800-445-5056 Technical
More informationPARTS LIST CHARGER 2717 DB
PARTS LIST CHARGER 2717 DB ITEM PART NO. PART DESCRIPTION QTY. 101 6497261 AXLE / PIVOT MOUNT 2 102 9122260 3/8-16 X 1 HEX BOLT - PACK OF 2 4 103 9122100 3/8 SPLIT LOCK WASHER - PACK OF 10 4 104 9122180
More informationParts Manual Rev. A RZT48 /
115 91 36-2 Rev. A Parts Manual RZT48 / 96 62001-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of 10%
More informationProteus 20B 20 Automatic Scrubber
Proteus 20B 20 Automatic Scrubber Parts List & Service Manual The contents of this manual are based on the latest product information available at the time of publication. Pacific reserves the right to
More informationParts Manual for the Wright Z
Parts Manual for the Wright Z Serial numbers 40581 & Higher Check www.wrightmfg.com for the latest revision Rev 6/2010 Shown with OPTIONAL Grass Collection System 2010 Wright Manufacturing Inc., All Rights
More information20" FLOORKEEPER EZ BRUSH DRIVE
TORNADO INDUSTRIES 7401 W. LAWRENCE AVENUE CHICAGO, IL 60706 (708) 867-5100 FAX (708) 867-6968 www.tornadovac.com Tornado Parts List Manual For Commercial Use Only 20" FLOORKEEPER EZ BRUSH DRIVE MODEL
More informationDIAMOND CONCRETE SAW PARTS LIST MODEL CC8000 P R O D U C T S. (Revised )
DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODEL CC8000 (Revised 10-15-2002) Table of Contents Page Saw Controls Legend. 3 Drawing 1. Frame Group. 4-5 Drawing 2. Arm Assembly... 6-7 Drawing 3. Hydraulics
More informationMM184 Rev. 12 (9 94)
465 480 490 MM184 Rev. 12 (9 94) This manual is furnished with each new TENNANT Model 465, 480, and 490. It provides necessary operating and preventive maintenance instructions. Read this manual completely
More informationParts Manual Rev. 3
114 08 93-27 Rev. 3 Parts Manual Z 254F / 967954001-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of
More informationParts Manual Port A Scrub 14 with Power Pack MODEL M14BQP (Battery)
Parts Manual Port A Scrub 14 with Power Pack MODEL M14BQP (Battery) Introduction Preface Please be advised explicitly that we cannot accept any legal issues out of the contents of this manual. If repair
More informationTornado. Marathon 2000 Forward Only Extractor. Parts List Manual For Commercial Use Only CATALOG NO (115V, 60 HZ)
TORNADO INDUSTRIES 7401 W. LAWRENCE AVENUE CHICAGO, IL 60706 (708) 867-5100 FAX (708) 867-6968 www.tornadovac.com Tornado Parts List Manual For Commercial Use Only Marathon 2000 Forward Only Extractor
More information