TK1000 RIDER SWEEPER ENTER PARTS MANUAL REV A

Size: px

Start display at page:

Download "TK1000 RIDER SWEEPER ENTER PARTS MANUAL REV A"

Doreen Hicks
6 years ago
Views:

1 TK1000 RIDER SWEEPER ENTER PARTS MANUAL REV A August 2002

2 TK 1000 RIDER-SWEEPER - Chassis Assembly TK 1000 RIDER-SWEEPER - Chassis Assembly Seat Screw 8x Air diffusor Upper cover -RED Upper cover -WHITE Upper cover - BLUE Upper cover -LIGHT BLUE Nut M Washer 6x Hinge Screw 6x Seat bearing frame Washer 8x Nut M Screw 6x Lever locking

3 TK 1000 RIDER-SWEEPER - Chassis Assembly Lever lock striker Washer 10x Complete handle Washer 6x Screw 6,3x Drawer bracing Waste bin Chromed cup Ø Wheel Ø Wheel's pivot Filter conteiner's cover Butterfly screw Electric box cover Adjustment bumper Nut M Upper left side crankcase -RED Upper left side crankcase -WHITE Upper left side crankcase - BLUE Upper left side crankcase -L. BLUE Upper right side crankcase -RED Upper right side crankcase -WHITE Upper right side crankcase - BLUE Upper right side crankcase -L. BLUE Lower left side crankcase Lower right side crankcase Frame Screw 8x Nut M Screw 6x Nut M10 38/A Grey Front inner casing 38/B Double brush front inner casing Running board Front casing Screw 6x Grey dashboard Nut M6 44/A Complete grey buffer

4 TK 1000 RIDER-SWEEPER - Chassis Assembly 44/B Double brush complete grey buffer Wiring box Self-tapping screw 3,5x Self-tapping screw 3,5x9, Nut M Washers 5x V 21W Light bulb Screw 5x Reverse gear light Spring Micro Complete back drawer Complete Upper cover-red Complete Upper cover-white Complete Upper cover- BLUE Complete Upper cover-l. BLUE-

5 TK1000-RIDER/SWEEPER - BROOM ASSEMBLY TK1000-RIDER/SWEEPER - BROOM ASSEMBLY Main brush Brush command lever Handgrip support Micro side brush Brushlifter cable sheath Brushlifter cable Cable-adjusting pivot Nut M Fork clip M M8 fork Screw 8x Washer 8x Key 5x5x20

6 TK1000-RIDER/SWEEPER - BROOM ASSEMBLY Motor Locknut M Screw 6x Washer 6x Belt Ø 8 x Pulley Backsending pulley Screw 8x Washer 8x Belt Ø 10 x Pulley fixing pivot Inside snap ring Ø Bearings Nut M Adjusting bumper Screw 8x Outer snap ring Ø Bushing Rocker spring Hook for spring Shaft Rocker Flange Bushing Washer 15x Bushing Pulley Screw 6x Key 6x6x Washer 21x Outer snap ring Ø Screw 6x Brush holder lock Washer 8x Screw 8x Brushblocker arm Brushblocker arm blocker Brush pressing spring

7 TKS710ET Silver Series Vacuum Sweeper - Broom Assembly Clamp Ø Screw 8x Side brush lifting lever Washer 8x Ring for the side brush bearing Balls 11/32" N TK Side brush mov. toothed ring Pin for rocker N Bushing for bearings Bearing RS Idle toothed ring Outer snap ring Ø Washer 12X Spacer Pulley Ø 27X Belt Ø 8 x Washer 8x Side brush support Side brush dragging flange Side brush Pulley Ø 30X Screw 6x Spacer Bearing HK Spring SPZ 737 Belt Pulley Spacer Ø 12 h Belt tightener roll Centre brush adjustment bracket Traction spring Outer snap ring Ø Pivot Side bumper Sheathing Support Screw 6x Screw 6x Washer 12x Pin

8 TK 1000RIDER SWEEPER - Control Assembly TK 1000RIDER SWEEPER - Control Assembly Dashboard with hourmeter Complete horn button Complete key switch Pos. turner Electr.board SC 1000 CD/A Functions board SC 1000 CS/A 6/A Pos. turner Adhesive board Cable for battery bridge Battery 6V 240 Ah Battery bearer Main cable

9 TK 1000RIDER SWEEPER - Control Assembly Main cable Complete battery unplugging key 13A RED Battery unplugging key Nut M Bushing Washer 6x Screw 6x Screw 5x Connector for battery charger Gas pedal cover Gas pedal Nut M Speed Powermeter Micro side brush Powermeter gear Accelerator gear Horn Screw 6,3x Screw 3x Nut M Brake pedal cover Washer 8x Pivot Spring coupling pivot Screw 8x Spring Bushing Screw 8x Bushing Bushing Pivot Pivot Dowel 6x Brake pedal Spring Pivot Security brake pedal Outer snap ring Ø10

10 TK 1000RIDER SWEEPER - Control Assembly Micro for accelerator Bushing Command board Screw 5x Washer 5x Nut M Speed control board Relais board V Flashing light

11 TK1000 RIDERSWEEPER - Wheel Assembly TK1000 RIDERSWEEPER - Wheel Assembly Backside shaft bearer Screw 8x SBFL Stand Washer 8x Locknut M Washer 8x Screw 8x Washer 8x Backside tyre outer hub Tyres Backside tyre outer hub Screw 8x Left axle support back bracket Right axle support back bracket

12 TK1000 RIDERSWEEPER - Wheel Assembly Outer snap ring Ø Key 6x6x Reduction gear Reduction gear support bracket Steering wheel's cap Screw 6,3x Washer 10x Steer Steer damper Bearings RS Dashboard support Locknut M Washer 6x Screw 6x Steer shaft Inner snap ring Ø Elastic pin 5x Universal joint N Shaft Outer snap ring Ø Washer 12x Cable fixing pivot Locknut M Cable centering pivot Turned adjuster Screw 16x Closing flange Bearings Trasco joint blocking flange Screw 10x Outer snap ring Ø Ring nut M35x1, Spacer Shim 15x22x0, Bushing Bushing Chain Front wheel stand

13 TK1000 RIDERSWEEPER - Wheel Assembly Locknut M Sheath blocking clamp Backsending pivot Brake's cable sheath Brake's cable Brake Brake spring Clamp Spacer Front wheel hub (Brake side) Front wheel hub Spacer Front wheel pivot Key 5x5x25

14 TK 1000 RIDER SWEEPER - Filter Assembly TK 1000 RIDER SWEEPER - Filter Assembly Drawer's mousse kit Filterbearing frame Mousse gasket kit Upper mousse kit Panel filter Turned adjuster Nut M Unlooking filter handle Cable sheathing Screw 6x Screw 6x Filer shaker motor support Screw 10X Motorvibrator Nut ring M 25x1, Fan hole joint Fan

15 TK 1000 RIDER SWEEPER - Filter Assembly Fan's bushing Screw 5x Washer 5x Key 4x4x Electric motor 24V - 180W Fan's motor support Screw 6x Washer 6x Nut M Front/back. Flap blocker Fixed backside flap Side flaps blocker Side flaps Screw 6x Clamp for fork M Adjustable front fork Nut M Flap lifting cable Flap lifting spring Washer 12x Nut M Pivot Pedal cover Flap lifting pedal Clamp Outer snap ring Ø Cable fixing pivot Nut M Pivot Screw 3,9x Protection cover Dowel 6x Bushing Screw 4 x Motor flange Motor 24V - 35W

Back 1 page Warranty Policy Limited Warranty Eagle Power Products (EPP) warrants new cleaning equipment against defects in material and workmanship under normal use and service to the original

16 Back 1 page Warranty Policy Limited Warranty Eagle Power Products (EPP) warrants new cleaning equipment against defects in material and workmanship under normal use and service to the original purchaser as detailed below. 10 Years Subject to the conditions stated below, EPP warrants polyethylene tanks and housings to be free from defects in materials and workmanship for a period of ten years. 3 Years Subject to the conditions stated below, EPP warrants all automatic scrubber components to be free from defects in materials and workmanship for a 3-year period. Parts replaced or repaired are warranted for the remainder of the original warranty period. 1 Year Subject to the conditions stated below, EPP warrants all other cleaning equipment components to be free from defects in materials and workmanship for a 1-year period. Parts replaced or repaired are warranted for the remainder of the original warranty period. Batteries are prorated for one year. EPP will furnish and charge for replacement parts, including transportation, to the original owner through an EPP authorized service center. If the part is returned within 30 days and is found defective, the owner will be credited for the cost of the replacement part including shipping and handling. Labor charges are covered for one year from the date of purchase if provided by an authorized EPP service center. Travel is covered for 90 days for battery operated equipment only. Wear items exempt from warranty include belts, carbon brushes, power cords, wheels, pad drivers, clutch plates, brushes, pads, handle grips, filters, screens, throttle cables, and squeegees. This warranty shall not apply to failures caused by misuse or abuse, improper maintenance as stated in the operation manuals, use of unauthorized repair parts, repairs by other than an EPP authorized service center, and damage in transit. EPP disclaims and denies any liability for any direct, indirect, special incidental or consequential damage which may be suffered as a result of sale, delivery, servicing, use, loss of any product, downtime, labor, freight, or other charges not expressly included herein. Date Purchased: Serial Number: Serial Number: Please be sure to record this information. This information will be necessary for future warranty claims. Eagle Power Products Sales and Service Provided by: 1174 Northland Drive Mendota Heights, MN Fax

Electronic Service Manuals

Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions