Tornado. Marathon 2000 Forward Only Extractor. Parts List Manual For Commercial Use Only CATALOG NO (115V, 60 HZ)

Transcription

1 TORNADO INDUSTRIES 7401 W. LAWRENCE AVENUE CHICAGO, IL (708) FAX (708) Tornado Parts List Manual For Commercial Use Only Marathon 2000 Forward Only Extractor CATALOG NO (115V, 60 HZ) L8190CGP 11/ Tornado Industries All rights reserved.

2 NOTES 2

3 This illustrated parts book covers: CATALOG NO SERIES F SIZE 22 CAPACITY 20 Gal. VOLTS 115V AMPS 15 All specifications are subject to change without notice. TABLE OF CONTENTS: Main Assembly 4 Upper Tank Assembly 5 Lower Tank Assembly 7 Control Panel Assembly 10 Brush Assembly 12 Pump Assembly 14 Recovery Dome Assembly 15 Wiring Diagrams 16 Tornado Warranties do not cover components subject to normal wear or abuse and misuse, and have other limitations not specified here. For full details, contact your Authorized Tornado Distributor, Service Center, or the Tornado Technical Service Department. Tornado sales and service representatives are not authorized to waive or alter the terms of this warranty, or to increase the obligations of Tornado under the warranty. Standard Warranty Program* 10 Years: All plastic tanks and 1) 5) rotationally-molded bodies 2 Years: Parts on all Tornado and Tornado/Karcher 1) 2) 3) 5) cleaning equipment 1 Year: Labor on all Tornado and Tornado/Karcher 2) 5) cleaning equipment 1 Year: Warranty on batteries and chargers, one year pro-rated. * Effective January 1 st, Terms subject to change without notice. 1) Windshear Blower-Dryer, Insulation Blowers, T191, T201, CV 30, CV 38, CW 50, CW 100, Pro PAC Vacs, Duo-Upright Carpetkeepers, and all chargers are warranted for 1 (one) year for both parts and labor. 2) Warranties on all riding sweepers including the ICC1, KM 100/100 R, KMR 1250, and KMR 1700 are 24 months parts/6 months labor OR 1000 hours of operation, whichever comes first. Warranties on the 75/140 & 90/140 are 24 months parts/12 months labor OR 1,000 hours of operation whichever comes first. 3) All-non wear item parts purchased after warranty expiration are warranted for 90 days. 4) Warranty starts from the date of sale to the consumer or, at Tornado s discretion, 6 months after dealer purchased the unit from Tornado, whichever comes first. 5) See separate limited 2-year pressure washer policy. 3

4 MAIN ASSEMBLY 4

5 UPPER TANK ASSEMBLY (REF. #30642) 5

6 6 UPPER TANK ASSEMBLY (REF. #30642)

7 LOWER TANK ASSEMBLY (REF. #98190) 7

8 8 LOWER TANK ASSEMBLY (REF #98190)

9 LOWER TANK ASSEMBLY (REF. #98190) BOTTOM VIEW BACK VIEW 9

10 CONTROL PANEL ASSEMBLY (REF. # 30644) * NOT SHOWN 10

11 CONTROL PANEL ASSEMBLY (REF. # 30644) 11

12 BRUSH ASSEMBLY (REF. # 30643) 12

13 BRUSH ASSEMBLY (REF. #30643) ITEM DESCRIPTION PART # QTY 1 NUT, HEX. LOCK, KEPS, # BEARING, RADIAL BALL NUT, HEAVY HEX JAM 5/ WASHER, LOCK # WASHER, PLAIN ½ WASHER, LOCK 3/ SCREW, HEX-HEAD CAP 3/8-16 X 7/ SCREW, HEX HEAD CAP 1/4-20 X 3/ NUT, HEX. LOCK, NYLON INSERT, # FITTING, BRASS PLUG 1/8 NPT HEX SOCKET SPRAY NOZZLE, 1/8 V-JET BEARING BLOCK-BRUSH BEARING SEAL PULLEY TIMING (SHAFT) SCREW, PHILLIPS FLAT HEAD MACHINE #10-24 X ½ FITTING, BRASS ADAPTER 1/8 NPT X 3/ SPACER, 5/16 DELRIN WASHER, PLAIN SCREW, SLOTTED TRUSS-HD MACHINE, 3/8-16 X 3/ BEARING SLEEVE ¾ (NYLINER) GASKET, BEARING BLOCK BELT, TIMING BRUSH HOUSING BRACKET, BRUSH LEVEL ADJUSTING SCREW MANIFOLD SPRAYBAR BRUSH SHAFT, BRUSH GASKET, BRUSH PLATE BUSHING, BRUSH PIVOT WASHER, PLAIN 3/ KNOB BRACKET, SPRAYBAR HOLDER SPRING PIN NUT, HEX LOCK ½ WELDMENT, BRUSH PLATE & MOTOR BRACKET MOTOR, BRUSH-TYPE 115V MOTOR TIMING PULLEY, 115V

14 PUMP ASSEMBLY (REF. # 30645) ITEM DESCRIPTION PART # QTY 1 WASHER-LOCK (I/T) # FITTING QUICK CONN. NIPPLE X ¼ FPT PUMP SCREW-SLOTTED FILLISTER HEAD M4 X UNION TEE 3/ PLUG IN ELBOW 3/ SOLENOID VALVE ¼ PORT (120V) MALE CONNECTOR 3/ HOSE-3/8 OD X 1 ¼ LG HOSE-3/8 OD X 5 LG HOSE-3/8 OD X 22 LG HOSE-3/8 OD X 39 LG BRACKET SOLENOID HOSE-3/8 OD X 2 ½ LG * MOUNTING SPACER * SCREW-PHIL. PAN HD MACHINE SCREW #10-24X1-1/4 (SS)

15 RECOVERY DOME ASSEMBLY (REF. # 30646) 15

16 WIRING DIAGRAM (REF. # 30702) 16

17 WIRING DIAGRAM (REF. # 30702) 17