Parts Manual (EN) Read the Operators Manual before using the machine. Read the Safety Messages before servicing machine.

Transcription

1 Parts Manual (EN) Read the Operators Manual before using the machine. Read the Safety Messages before servicing machine. 1 South Street Racine, WI 3 (USA) (800) -8 (+001) -81- V1. 01 RPS Corporation MICROMINI-P-EN

2

3 Table of Contents TOC Machine Frame - Brush Assist... Machine Frame - Traction Drive... 0 Inch Disk Deck - Brush Assist... 0 Inch Disk Deck - Traction Inch EDGE Deck...10 Inch EDGE Deck...1 Tank Assembly - Serial Number 3 and greater...1 Tank Assembly - Serial Number 3 and greater...1 Tank Assembly - Serial Number 3 and lower...1 Clear Dome Lid Assembly...1 Central Command - Brush Assist...18 Central Command - Traction...1 Handlebar and Squeegee Lift Arm Assembly...0 Squeegee Drag Link Assembly...1 Squeegee Tool Assembly... Actuator Lift Assembly...3 Batteries and Chargers... Common Wear Parts... Common Wear Parts... Common Wear Parts...

4 Machine Frame - Brush Assist Solid Grey with Bearings Solid Black with Bearings MINI MICRO BATTERY TRAY BOSS MINI-MICRO FRAME TANK LATCH 10-1 AXLE SIGHT TUBE cable sleeve.par CASTER 10-8 BALL VALVE, 3/8" CASTER MOUNT 10- SQUEEGEE DRAG BRACKET CABLE GUIDE TRACTION SPACER BATTERY, 1 V, 1 AH TROJAN J10 PLUS 1V 10AH BATTERY TANK STRAP SUPPORT PUMP, WATER JET INLINE FILTER LATCH NPT X. BARB X 0 DEG 1 1 H-01 1/-0 X 3/" ID X." LG ID U-BOLT 1 H-01 CB #10-3 X 1-1/" SS 3 H-0 ELBOW, 0 DEG X 3/8" MNPT X 3/8" BARB, NYLON H-03 ELBOW, 0 DEG X 3/8" MNPT X 1/" BARB, NYLON 1 H-0HCN HCN 1/"-0 H-3 SETSCREW, KCP, 1/"-0 X 1/" 1 H-010 HCS 3/8"- 1 X 1-1/" SS 8 H-08 NYLOK #-3 SS 1 H-08 NYLOK #8-3 SS H-088 NYLOK #10-3 SS 31 H-080 NYLOK 1/"- 0 SS 3 H-081 NYLOK /1" - 18 SS 3 33 H-03 KN #10-3 SS 3 H-0 KN 1/-0 S/S H-100 FW #10 SS 3 H-1010 FW #10 ID X /1 OD SS 3 3 H-101 FW /1 ID X 3/ OD SS H-101 FW 3/8 ID X /8 OD SS 3 H-10 LW 3/8" SS H-38 PPH #8-3 X 1/" S/S H- PPHMS #10-3 X 3/" S/S H-1 PPH #-3 X 1/" SS 1 3 H-8 FHP 10-3 X 3/" SS H-388 FHSCS 1/- 0 X 3/" S/S H- FHSCS /1"- 18 X 3/" SS 8 H-0 CB 1/"- 0 X 1.0" SS H- CB /1"- 18 X 3/" SS 8 H-K GROMMET, 1" ID X 1-3/" OD BUNA-N H- RUBBER BUMPER, /3" 0 H- SPRING, -1/8" LG X 3/8" OD X 1/1 WIRE 1 H-NJ0C JNYL /1"- 18 SS M-3K WYE, 3/8", NYLON 1 3 M-03A 3/8 ID X /8 OD RUBBER WASHER M-K3 GROMMET, 3/8 ID X /8 OD X 1/8 TH. 1 * M-3T 3/" DIA 1 HOLE TUBE STRAP 1 M-88A SNAPRING 3/" HEAVY DUTY T-R000 SOLUTION HOSE 1 8 T-R100 SOLUTION HOSE 1

5 Machine Frame - Traction Drive NA 8 RUBBER MOUNTING SLEEVE P/N Solid Grey Solid Black MINI MICRO BATTERY TRAY BOSS MINI-MICRO FRAME TANK LATCH 10-1 SIGHT TUBE cable sleeve.par CASTER BALL VALVE, 3/8" CASTER MOUNT SQUEEGEE DRAG BRACKET CABLE GUIDE BATTERY, 1 V, 1 AH TROJAN 00-0 J10 PLUS 1V 10AH BATTERY AXLE MOUNT TRANSAXLE TANK STRAP SUPPORT PUMP, WATER JET INLINE FILTER LATCH NPT X. BARB X 0 DEG 1 1 H-01 CB #10-3 X 1-1/" SS H-0 ELBOW, 0 DEG X 3/8" MNPT X 3/8" BARB, NYLON 3 H-03 ELBOW, 0 DEG X 3/8" MNPT X 1/" BARB, NYLON 1 H-010 HCS 3/8"- 1 X 1-1/" SS H-08 NYLOK #-3 SS 1 H-08 NYLOK #8-3 SS H-088 NYLOK #10-3 SS 8 H-080 NYLOK 1/"- 0 SS 1 H-081 NYLOK /1" - 18 SS 1 H-100 FW #10 SS 31 H-101 FW /1 ID X 3/ OD SS 3 3 H-101 FW 3/8 ID X /8 OD SS 33 H-103 LW 1/" SS 1 3 H-10 LW 3/8" SS H-38 PPH #8-3 X 1/" S/S 3 H- PPHMS #10-3 X 3/" S/S 1 3 H-1 PPH #-3 X 1/" SS 1 38 H-388 FHSCS 1/- 0 X 3/" S/S 1 3 H- FHSCS /1"- 18 X 3/" SS 8 H- CB /1"- 18 X 3/" SS 1 H-K GROMMET, 1" ID X 1-3/" OD BUNA-N H- RUBBER BUMPER, /3" 3 H-NJ0C JNYL /1"- 18 SS 1 M-3K WYE, 3/8", NYLON 1 M-K3 GROMMET, 3/8 ID X /8 OD X 1/8 TH. 1 T-R000 SOLUTION HOSE 1 T-R100 SOLUTION HOSE 1

6 0 Inch Disk Deck - Brush Assist CURTAIN BAND 1" DECK USE'S P/N 10-0" DECK USE'S P/N DECK CURTAIN 1" DECK USE'S P/N 10-0" DECK USE'S P/N WIRE REINF. CLEAR TUBE 1" DECK USE'S P/N 10-0" DECK USE'S P/N ATTACH ALL LIFT ARMS TO DECK Machines W/serial # 83 and lower use part # Machines W/serial # 8 and higher use part # -003

7 0 Inch Disk Deck - Brush Assist 1 11 SUB #11 0 INCH SHROUD ASSEMBLY DISK DECK PLATFORM, 0" 1 3* /" ID X -1/" LG WIRE REINF. CLEAR TUBE /" ID X -3/" LG WIRE REINF. CLEAR TUBE /" ID X 1" LG WIRE REINF. CLEAR TUBE BALL VALVE, 1/" LATERAL ARM DECK WHEEL PIVOT BRACKET DECK WHEEL PIVOT SUPPORT " WHEEL (RED) ADJUSTABLE SOLUTION FLOW VALVE, WITH 1/" NPTF SPACER 1/ OD X 1/" 1-00 SIDE WHEEL (GREY) /8" ID, 1/" OD, 1/" LG BEARING /8" ID, 1/" OD, 3/8" LG, FLANGE BEARING STAR KNOB, 3/8- THREAD LATERAL ARM /" X 1" KEY 1 1-1/ NPT X 1/" BARB ELBOW INLINE FILTER MOTOR, -V, 3/ HP, 00 RPM 1 H-00 FW 3/" ID X 1 1/8" OD X 3/3" SS 1 3 H-000 JNYL 3/8- SS 3 H-01. NPT X.O BARB 1 H-000 1/" NPT LOCKNUT H-1 SPRING, 1/" ID X -1/" LG 1 H-1 CLEVIS PIN, 3/8" X -1/" 1 8 H-00 HCS /1"- 18 X 1" SS 1 H-010 HCS 3/8"- 1 X 1" SS H-0 HCS 3/8"- 1 X -1/" SS 1 31 H-01 HCS 3/8"- X " SS 3 H-0 HN /1"- 18 SS 33 H-0 HN 1/"- 8 SS 1 3 H-080 NYLOK 1/"- 0 SS 1 H-081 NYLOK /1" - 18 SS 3 H-03 KN #10-3 SS 3 H-0 KN 1/-0 S/S 38 H-101 FW /1 ID X 3/ OD SS 3 H-101 FW 3/8 ID X /8 OD SS 1 H-10 LW /1" SS 3 H-10 LW 3/8" SS H-3 PPH #10-3 X 3/" S/S 3 H-380 BHSCS /1-18 X 1 H- CB /1"- 18 X 1-3/" SS H- CB 1/"- 0 X." SS 8 H- CB /1"- 18 X 3/" SS H- CB /1"- 18 X 1" SS 8 H-8A HCS 3/8"- X 3." SS 1 H- SPRING, " LG X 1/" OD X.03 WIRE 0 H-001 FW 3/8" SS NOM ID. X OD H-NJ0C JNYL 1/" - 0 SS H-NJ0C JNYL /1"- 18 SS 3 H-NJ0C JNYL 3/8-1 SS 1 H-RUE1 3/8" RUE RING COTTER 1 M-31K3.31 ID X. OD X. LG BEARING SLEEVE 8 M-8A01.3" ID X 3/" OD X 1/" LDPE SPACER M-3T 3/" DIA 1 HOLE TUBE STRAP 1

8 8 0 Inch Disk Deck - Traction CURTAIN BAND 1" DECK USE'S P/N 10-0" DECK USE'S P/N 10-0 DECK CURTAIN 1" DECK USE'S P/N 10-0" DECK USE'S P/N 10- WIRE REINF. CLEAR TUBE 1" DECK USE'S P/N 10-0" DECK USE'S P/N Machines W/serial # 83 and lower use part # Machines W/serial # 8 and higher use part #

9 0 Inch Disk Deck - Traction Item Part Number Part Description Qty 1 11 SUB #11 0 INCH SHROUD ASSEMBLY DISK DECK COVER PLATE DISK DECK PLATFORM, 0" /" ID X -3/" LG WIRE REINF. CLEAR TUBE /" ID X 1" LG WIRE REINF. CLEAR TUBE LATERAL ARM 1 1- SPACER 1/ OD X 1/" MOTOR 3/ HP X 0 RPM ADJUSTABLE SOLUTION FLOW VALVE PALM GRIP KNOB, 3/ SIDE WHEEL (GREY) /8" ID, 1/" OD, 3/8" LG, FLANGE BEARING 8-1 LATERAL ARM /" X 1" KEY 1 1-1/ NPT X 1/" BARB ELBOW INLINE FILTER 1 1 H-00 FW 3/" ID X 1 1/8" OD X 3/3" SS 1 18 H-000 JNYL 3/8- SS 1 H-01 CB /1"- 18 X /8" SS 0 H-000 1/" NPT LOCKNUT 1 H-00 HCS /1"- 18 X 1" SS 1 H-010 HCS 3/8"- 1 X 1" SS 3 H-01 HCS 3/8"- X " SS H-0 HN /1"- 18 SS H-0 HN 1/"- 8 SS 1 H-080 NYLOK 1/"- 0 SS 1 H-081 NYLOK /1" - 18 SS 8 H-03 KN #10-3 SS H-0 KN 1/-0 S/S H-101 FW /1 ID X 3/ OD SS 31 H-10 LW /1" SS 3 3 H-10 LW 3/8" SS 33 H-3 PPH #10-3 X 3/" S/S 3 H-380 BHSCS /1-18 X 1 H- CB /1"- 18 X 1-3/" SS 3 H- CB 1/"- 0 X." SS 3 3 H- CB 1/"- 0 X." SS 38 H- CB /1"- 18 X 1" SS 3 H- SPRING, " LG X 1/" OD X.03 WIRE H-001 FW 3/8" SS NOM ID. X OD H-NJ0C JNYL 1/" - 0 SS H-NJ0C JNYL /1"- 18 SS 3 M-31K3.31 ID X. OD X. LG BEARING SLEEVE 8 M-8A01.3" ID X 3/" OD X 1/" LDPE SPACER M-3T 3/" DIA 1 HOLE TUBE STRAP 1

10 Inch EDGE Deck

11 0 Inch EDGE Deck

12 1 1 Inch EDGE Deck

13 Inch EDGE Deck

14 1 Tank Assembly - Serial Number 3 and greater SOLUTION TANK GRANITE: 10-W SOLUTION TANK RED: 10-W INNER SQUEEGEE HOSE INNER VAC HOSE TANK STRAP BRACKET TANK STRAP VAC MOTOR INSULATION BANDEAU COVER (DISK), PLASTIC SPLASH CURTAIN SIGHT TUBE VACUUM FAN MUFFLER, 8" LG 10* 10-8 BATTERY CONFIGURATION PLATE EXHAUST ELBOW /" X " NIPPLE SCREEN STRAINER, -1/" LG / HOSE CAP RECOVERY DRAIN HOSE " MNPT X.0" BARB, PVC " MNPT X 1.0" BARB, PVC VAC MOTOR GASKET VAC MOTOR, 3/ HP, TANGENTAL SQUEEGEE HOSE CLIP 3- HOOK CLAMP 1 /1-1/ " SS O-RING, #3, 1." X 1." X.10" BUNA-N FILL HOSE 1 H-0188 # 3/8" RUBBER LOOP CLAMP 1 H-01 CLAMP 3/"- 1-3/" SS 1 8 H-00 HOSE CLAMP, # S/S 1 H-0 CLAMP 1.0"-.0" SS 1 H-0001 HCS 1/"-0 X 1/ SS" 3 31 H-0003 HCS 1/"-0 X 3/" SS 3 H-080 NYLOK 1/"- 0 SS 3 33 H-0 KN 1/-0 S/S 3 H-10 FW 1/ ID X /8 OD SS 8 H-103 LW 1/" SS 8 3 H-11 FNW 1/ ID X 1.0 OD SS 3 3 H-183 1/ X 3/ SELF TAPPING SCREW 1 38 H-0 PPH SMS # X 1/" SS 3 H-3 BHSCS 1/ - 0 X /8" SS 3 M-K18 ELBOW, 3/8" MNPT X 3/8" BARB, BRASS M-3K WYE, 3/8", NYLON 1 M-01A0." NEOPRENE WASHER 3 M-K3 GROMMET, 3/8 ID X /8 OD X 1/8 TH. 1 M-A FTS 1/"- 0 X " SS 3 T-038R100 ELBOW TO WYE - HOSE 1

15 Tank Assembly - Serial Number 3 and greater PUSH-ON RUBBER GASKET MICRO MINI BAFFLE SCREEN STRAINER, -1/" LG INNER VAC BOX STRAINER TOP BALL FLOAT GASKET 1-8 VAC BOX FILTER SCREEN STRAINER OVERFILL SHUTOFF BALL STRAINER GASKET " Clear Access Port 1 1 H-03 KN #10-3 SS H- PPH #10-3 X 1-1/" 1 H-8 FHP 10-3 X 3/" SS 1 H-1 PPH SMS #8 X 1/" 1 H-K GROMMET, " ID X -/8" OD 1 1 M-K.0 X O-RING

16 1 Tank Assembly - Serial Number 3 and lower SOLUTION TANK GRANITE: 10-W SOLUTION TANK RED: 10-W FOR MACHINES WITH FRONT MOUNTED EDGE DECKS USE BANDEAU PART NUMBER BALL FLOAT HOLDER VAC MOTOR INSULATION BANDEAU COVER (DISK), PLASTIC SOLUTION FILL LID SEAL BAFFLE SIGHT TUBE VACUUM FAN MUFFLER, 8" LG EXHAUST ELBOW /" X " NIPPLE /" DIA. INNER VAC HOSE INNER SQUEEGEE HOSE TANK STRAP, " LG X " WIDE / INCH DIA. COMPLETE DRAIN HOSE / HOSE CAP STRAP, HOSE RETAINER, " SCREEN STRAINER, -1/" LG " MNPT X.0" BARB, PVC " MNPT X 1.0" BARB, PVC VAC MOTOR GASKET VAC MOTOR, 3/ HP, TANGENTAL SNAP GRIP CLAMP VAC SCREEN VAC BOX SQUEEGEE HOSE TANK STRAP SUPPORT CLIP HOOK 1 - TANK BACK SPLASH 1-1 CLAMP 1 /1-1/ " SS O-RING, #3, 1." X 1." X.10" BUNA-N 1 3 H-0188 # 3/8" RUBBER LOOP CLAMP 1 33 H-01 CLAMP 3/"- 1-3/" SS 1 3 H-00 HOSE CLAMP, # S/S 1 H-0 CLAMP 1.0"-.0" SS 1 3 H-0001 HCS 1/"-0 X 1/ SS" 3 H-0003 HCS 1/"-0 X 3/" SS 38 H-088 NYLOK #10-3 SS 1 3 H-080 NYLOK 1/"- 0 SS H-0 KN 1/-0 S/S H-10 FW 1/ ID X /8 OD SS 8 H-103 LW 1/" SS 3 H-11 FNW 1/ ID X 1.0 OD SS 1 H-183 1/ X 3/ SELF TAPPING SCREW H-8 FHP 10-3 X 1" SS H-0 PPH SMS # X 1/" SS H-3 BHSCS 1/ - 0 X /8" SS 1 8 H-8 CB 1/"- 0 X /8" S/S M-K18 ELBOW, 3/8" MNPT X 3/8" BARB, BRASS 0 M-3K WYE, 3/8", NYLON 1 1 M-01A0." NEOPRENE WASHER M-A FTS 1/"- 0 X " SS 3 3 T-038R100 ELBOW TO WYE - HOSE 1

17 Clear Dome Lid Assembly 1 TANK LID ASSEMBLY 10-10D PUSH-ON RUBBER GASKET VAC FORMED SMOKED COVER TANK LID STRAP W/GROMMETS H-011 JNYL #10-3, 18-8 S/S H-3 PPH #10-3 X 3/" S/S H-1 PPH SMS #8 X 3/" SS H ID X.0 OD X.03 TH NEOPRENE WASHER 1

18 18 Central Command - Brush Assist solution flow cable (not shown) VALVE LEVER CONTROL BOX CONTROL PANEL STICKER HANDLE GRIP (BLUE) METER, BATTERY, V SWITCH, ROCKER, DPDT, ON/ON BRUSH PRESSURE GAUGE, AMP RELAY, V, 0 AMP FUSE RESETTABLE AMP SWITCHBOARD INSULATOR 1- MICRO SWITCH KEY SWITCH (WITH KEY) 1 0-3A KEY SET (REPLACE) CIR. BREAKER - 1A, V FUSE, RESETTABLE, AMP SWITCH, TOGGLE, MOM/OFF/MOM (DPDT) TOGGLE, ON-OFF SPST CONNECTOR, RED 0, HOUSING ONLY HOUR METER 1 0 H-008 FW 1/" NYLON 1 H-1 PROTECTIVE BOOT, TOGGLE SWITCH, (BLUE) 1 H-00 PROTECTIVE BOOT, TOGGLE SWITCH, (BLACK) H-333 SHAFT COLLAR, 3/8" ID H-0003 HCS 1/"-0 X 3/" SS H-010 HN 1/"- 0 SS H-08 NYLOK #- SS 3 H-08 NYLOK #8-3 SS 3 8 H-080 NYLOK 1/"- 0 SS 1 H-0 KN #8-3 3 H-0 KN 1/-0 S/S 3 31 H-100 FW #8 SS 3 H-10 FW 1/ ID X /8 OD SS 1 33 H-101 FW /1 ID X 3/ OD SS 3 H-103 LW 1/" SS * H-11 FNW 1/ ID X 1.0 OD SS 1 3 H-38 PPH #8-3 X 1/" S/S 3 H-8 PPH #8-3 X 1" S/S 38 H-8 PPH #- X 1/" S/S 3 H- PPH #- X 3/" S/S H- FHP #8-3 X 3/" 1 H- CB 1/"- 0 X." SS H- CB 1/"- 0 X." SS 1 3 H-K GROMMET, 1" ID X 1-3/" OD BUNA-N M-A STUD 1/-0 X 1-1/" SS

19 Central Command - Traction solution flow cable (not shown) VALVE LEVER CONTROL BOX CONTROL PANEL STICKER RELAY, V, SMALL W/FLAT MTG PLATE IDRIVE V/3V, 0 AMP CONTROLLER HANDLE GRIP (BLUE) SWITCH, ROCKER, DPDT, ON/ON BRUSH PRESSURE GAUGE, AMP V BATTERY AND HOUR METER RELAY, V, 0 AMP FUSE RESETTABLE AMP FUSE, RESETTABLE, AMP SWITCHBOARD INSULATOR TILT SWITCH TILT SWITCH BRACKET MICRO SWITCH KEY SWITCH (WITH KEY) A KEY SET (REPLACE) CIR. BREAKER - 1A, V SWITCH, TOGGLE, MOM/OFF/MOM (DPDT) CHARGER COUNTER 1-80 TOGGLE, ON-OFF SPST CONNECTOR, RED 0, HOUSING ONLY 1 H-008 FW 1/" NYLON H-1 PROTECTIVE BOOT, TOGGLE SWITCH, (BLUE) 1 H-00 PROTECTIVE BOOT, TOGGLE SWITCH, (BLACK) 1 H-8 PPH #- X 1/" 1 8 H-333 SHAFT COLLAR, 3/8" ID H-0003 HCS 1/"-0 X 3/" SS H-010 HN 1/"- 0 SS 31 H-08 NYLOK #- SS 3 H-08 NYLOK #8-3 SS 3 33 H-080 NYLOK 1/"- 0 SS 1 3 H-0 KN #8-3 H-0 KN 1/-0 S/S 3 H-100 FW #8 SS 3 H-10 FW 1/ ID X /8 OD SS 1 38 H-101 FW /1 ID X 3/ OD SS 3 H-103 LW 1/" SS 8 H-38 PPH #8-3 X 1/" S/S H-8 PPH #8-3 X 1" S/S H-8 PPH #- X 1/" S/S 3 H- PPH #- X 3/" S/S H-3 PPH #10-3 X 1" S/S H- FHP #8-3 X 3/" 1 H- CB 1/"- 0 X." SS H- CB 1/"- 0 X." SS 1 8 H-K GROMMET, 1" ID X 1-3/" OD BUNA-N M-K3 GROMMET, 3/8 ID X /8 OD X 1/8 TH. 1 0 M-A STUD 1/-0 X 1-1/" SS 1

20 0 Handlebar and Squeegee Lift Arm Assembly FOR TRACTION DRIVE MACHINES USE PART # FOR PAD ASSIST MACHINES USE PART # ADJUSTABLE HANDLE BAR HOLDER HANDEL BAR COVER TRACTION CONTROL PANEL COVER MICRO MAG STICKER SWITCH, TOGGLE, MOM/OFF/MOM (DPDT) EXPLOSION WARNING PLATE SPACER, 1-1/" LG SQUEEGEE LIFT LEVER END CAP SPEED CONTROL KNOB, RED LIFT KNOB SQUEEGEE LIFT CABLE, " BRONZE THRUST BEARING,.0" ID X 1.0" OD X 1/1" TH INDEX PLUNGER BUSHING 1-0 EMERGENCY SHUT OFF EMERGENCY LEGEND PLATE EMERGENCY CONTACT BLACK BUTTON COVER 0-8 SWITCH MOUNT PLATE 1 -D PUSH BUTTON SWITCH - K POTENTIOMETER 1 3 H-03 3/8" VINYL LOOP CLAMP 1 H-0 HCN #10-3, LG CRIMP 8 H-108 HEAT SHRINK H-1 PROTECTIVE BOOT, TOGGLE SWITCH, (RED) 1 H-00 AB-3A BLIND RIVET 8 8 H-0 FW 3/8" X 3/" NYLON H-088 NYLOK #10-3 SS H-080 NYLOK 1/"- 0 SS 1 31 H-081 NYLOK /1" - 18 SS 3 3 H-08 NYLOK 3/8"-1 SS 33 H-100 FW #10 SS 3 3 H-10 FW 1/ ID X /8 OD SS H-101 FW /1 ID X 3/ OD SS 3 H-101 FW 3/8 ID X /8 OD SS 1 3 H-10 LW #8, SS 38 H-103 LW 1/" SS 1 3 H-11 FNW 1/ ID X 1.0 OD SS 1 H-11 FNW 3/8 ID X 1-1/ OD SS H-38 PPH #8-3 X 1/" S/S H-1 PPH #10-3 X /8" SS 3 H- PPH #10-3 X " SS H-81 FHP #10-3 X 3/8" SS H-3 BHSCS 10-3 X 3/8" SS 1 H- BHSCS 1/ - 0 X.0" SS H-3 BHSCS /1-18 X 3/" 8 H-380 BHSCS /1-18 X 1 H-381 BHSCS 3/8"- 1 X 1" SS 1 0 H-3 CB 1/"- 0 X.0" SS 1 H-3 CB 3/8"- 1 X 1.0" SS 1 H- RUBBER BUMPER, /3" 3 H-NJ0C JNYL /1"- 18 SS M-K3 GROMMET, 3/8 ID X /8 OD X 1/8 TH.

21 Squeegee Drag Link Assembly SQUEEGEE TRAIL ARM ASSEMBLY: SQUEEGEE SWING PLATE SPRING, /8" ID X.0" LG UPPER SQUEEGEE TRIANGLE PIVIOT LOWER SQUEEGEE TRIANGLE PIVIOT 1 - ADJUSTMENT KNOB 1 H-001 3/8" X -1/" CLEVIS PIN 1 H-010 SHCS /1-18 X -1/ SS 1 8 H-31HCN HCN /1"-18 1 H-0 FW 3/8" X 3/" NYLON 10 H-00 HCS /1"- 18 X 1" SS H-0 HN /1"- 18 SS 1 H-08 NYLOK #-3 SS 1 H-081 NYLOK /1" - 18 SS 3 1 H-101 FW /1 ID X 3/ OD SS 1 H-10 LW /1" SS 1 1 H-1 PPH #-3 X 1/" SS 1 1 H- CB /1"- 18 X 3/" SS 1 18 H- SPRING, -1/8" LG X /1" OD (E) 1 H-NJ0C JNYL /1"- 18 SS 1 0 H-RUE1 3/8" RUE RING COTTER 1 1 T-308S000 " GOLD GROUDING CHAIN

22 Squeegee Tool Assembly 3 For inch squeegee use a 3 inch wheel part number STAR KNOB, 3/8-1 THREAD 10-0 BACKUP WHEEL BRACKET " SIDE WHEEL (GREY) 1-0 BACK UP WHEEL (GREY) H-0 BHSCS 3/8"- 1 X -1/" S/S H-000 HCS 1/"- 0 X 1." SS H-0010 HCS 1/"- 0 X 1." SS 8 H-0 HN /1"- 18 SS H-080 NYLOK 1/"- 0 SS 10 H-010 WINGNUT 1/-0 SS 8 H-103 LW 1/" SS 1 H-10 LW /1" SS H-38 BHSCS /1-18 X.0 1 H-3 CB 1/"- 0 X 1-3/" SS 1 H-3 CB 1/"- 0 X -1/" SS 1 H-3 CB 1/"- 0 X.0" SS 1 H- CB 1/"- 0 X -1/" SS For inch squeegee rear band use part number 1-10 For inch squeegee rear band use part number For 3 inch squeegee rear band use part number ONLY USED ON 3 INCH 1 1 For inch squeegee body use part number For inch squeegee body use part number For 3 inch squeegee body use part number For inch front squeegee band use part number 1-10 For inch front squeegee band use part number For 3 inch front squeegee band use part number For inch front squeegee blade use part number 1-L for linatex 1-G for gum rubber and 1-U for urethane For inch front squeegee blade use part number 10-L for linatex 10-G for gum rubber and 10-U for urethane For 3 inch front squeegee blade use part number 180-L for linatex 180-G for gum rubber and 180-U for urethane For inch squeegee blade use part number 1-L for linatex 1-G for gum rubber and 1-U for urethane For inch squeegee blade use part number 10-L for linatex 10-G for gum rubber and 10-U for urethane For 3 inch squeegee blade use part number 180-L for linatex 180-G for gum rubber and 180-U for urethane INCH SQUEEGEE ASSEMBLY INCH SQUEEGEE ASSEMBLY INCH SQUEEGEE ASSEMBLY

23 Actuator Lift Assembly ACTUATOR ANCHOR " STROKE V ACTUATOR LB LOAD /8" ID, 1/" OD, 1/" LG BEARING 0-0 ACTUATOR ARM 1 H-1 CLEVIS PIN, 3/8" X -1/" H-01 HCS 3/8"- 1 X " SS 1 H-0 HCS 1/"- X -1/" SS 1 8 H-01 HN 3/8"-1 SS 1 H-08 NYLOK 1/"- SS 1 10 H-101 FW 1/ ID X 1-1/ OD SS H-0 FW 1/" NYLON 1 H- SPRING, -1/8" LG X /1" OD (E) H-RUE1 3/8" RUE RING COTTER 3

24 Batteries and Chargers 1 AH TROJANS USE CHARGER 10- COMPLETE BATTERY CABLES HARNESS T-031B00 M-031K1 BATTERY TRAY AH TROJANS USE CHARGER 10- COMPLETE BATTERY CABLES HARNESS T-031B00 M-031K1 BATTERY TRAY AH AGM USE CHARGER 10- COMPLETE BATTERY CABLES HARNESS T-031B00 M-031K1 BATTERY TRAY

25 Common Wear Parts ROUND DISK BRUSHES FOR SERIAL # 83 AND BELOW: BRUSHES MODEL 1'' DISK MODEL 0'' DISK Super Grit 1-1SS 0-1SS Tough Grit 1-1S 0-1S Midi Grit 1-1C 0-1C Light Grit 1-1PS 0-1PS Poly (.08) 1-1P 0-1P Nylon (.01) 1-1N 0-1N Tampico 1-1T 0-1T Pad Driver 1-1D 0-1D Diamond Driver 1-1DD 0-1DD Pad Retainer #-3 ROUND DISK BRUSHES FOR SERIAL # 8 AND ABOVE: ROUND DISK PADS: BRUSHES MODEL 1'' DISK MODEL 0'' DISK Super Grit 1-38SS 0-38SS Tough Grit 1-38S 0-38S Midi Grit 1-38C 0-38C Light Grit 1-38PS 0-38PS Poly (.08) 1-38P 0-38P Nylon (.01) 1-38N 0-38N Tampico 1-38T 0-38T Pad Driver 1-38D 0-38D Diamond Driver 1-38DD 0-38DD Pad Retainer #-3 NOTICE The ## in Disk Column Denotes Desk Pad Size: 1'' or 0'' DISK PADS DISK LEVEL COLOR Super Black ##-BB Very High Black Black ##-B High Black Brown ##-BR High Brown Green ##-G Medium Green Blue ##-BL Moderate Blue Red ##-R Moderate Red White ##-W Light White

26 Common EDGE PADS AND SCREENS: Wear Parts DESCRIPTION '' 1'' SCRUBDECK 0'' 1'' SCRUBDECK '' 1'' White Pad N/A EDGE-0 N/A Red Pad EDGE- EDGE-0 N/A Blue Pad EDGE-3 EDGE-03 N/A Green Pad EDGE- EDGE-0 N/A Black Pad EDGE-1 EDGE-01 N/A White Driver Pad N/A EDGE- EDGE-1 0 Grit Sand Screen N/A EDGE- EDGE-0 80 Grit Sand Screen N/A EDGE- EDGE Grit Sand Screen N/A EDGE-8 EDGE- 10 Grit Sand Screen N/A EDGE- EDGE-3 10 Grit Sand Screen N/A EDGE- EDGE- 0 Grit Sand Paper N/A EDGE-31 N/A 3 Grit Sand Paper N/A EDGE-3 N/A 0 Grit Sand Paper N/A EDGE-33 N/A 80 Grit Sand Paper N/A EDGE-3 N/A 100 Grit Sand Paper N/A EDGE- N/A 100 Grit Diamond Polishing Pad N/A EDGE-1 N/A 0 Grit Diamond Polishing Pad N/A EDGE- N/A 800 Grit Diamond Polishing Pad N/A EDGE-1 N/A 100 Grit Diamond Polishing Pad N/A EDGE-1 N/A 00 Grit Diamond Polishing Pad N/A EDGE-1 N/A 000 Grit Diamond Polishing Pad N/A EDGE-0 N/A Tile/Grout Renovator Pad N/A EDGE-18 N/A Microfiber Pad N/A EDGE-3 N/A Abrader Plate N/A N/A EDGE- Dominator HD Strip Pad N/A EDGE-0 N/A Maroon ECO Prep Pad EDGE- EDGE-0 N/A Remover Burnishing Pad N/A EDGE-08 N/A Porko Burnishing Pad N/A EDGE-1 N/A Velcro Pad N/A 0-3 N/A EDGE GRIP FACE: DESCRIPTION PART# 0'' Velcro Grip Face '' Velcro Grip Face '' Mighty Lok Grip Face Z

27 Common Wear Parts SQUEEGEE BLADE KITS & COMPLETE SQUEEGEE ASSEMBLIES: SQUEEGEE SIZE MODEL '' EDGE GUM RUBBER BLADE KIT LINATEX BLADE KIT COMPLETE SQUEEGEE ASSEMBLIES '' Squeegee Optional 1-0G 1-0L '' Squeegee Optional 10-0G 10-0L '' Squeegee Standard 180-0G 180-0L NOTICE Squeegee blade kits include (1) Rear Blade, (1) Front Blade, and () Backup Wheels with hardware. NOTICE Size is stamped into the top of the painted steel squeegee body on all squeegee's. NOTICE Squeegee Assemblies (complete) listed above all come with Linatex blades. NOTICE The '' squeegee is designed for narrow aisles and may not have the same water control around tight turns as the large squeegees.

28 BLANK THIS PAGE WAS INTENTIONALLY LEFT BLANK

29 BLANK THIS PAGE WAS INTENTIONALLY LEFT BLANK

30 1 South Street Racine, WI 3 Tel. US: Tel. Int: (001) RPS Corporation 01