Parts Manual SPEEDZTR 30 /

Transcription

1 Parts Manual SPEEDZTR 30 / Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Form Number Rev A

2 When you need spare parts or support in service questions, warranty issues, etc., please consult the following professional: This Parts Manual belongs to the machine with the manufacturing number: Engine Transmission Manufacturing Number The machine s manufacturing number can be found on the printed plate affixed to the engine compartment. Illustration shown with engine removed. Stated on the plate, from the top are: The machine s type designation (I.D.). The manufacturer s type number (Model). The machine s serial number (Serial no.) Please have the type designation and serial number available when ordering spare parts. The engine s manufacturing number is stamped on one of the valve covers. The plate states: The engine s model. The engine s type. Code Please have these available when ordering spare parts. The wheel motors and hydrostatic pumps have a barcode decal affixed at the rear. Accessories Available Collection System Mulch Kit All rights reserved. Orangeburg, SC Printed in U.S.A.

3 CONTENTS FRAME... 4 ENGINE PLATE... 6 STEERING... 8 FUEL SYSTEM HYDRAULIC PUMP / MOTOR WHEELS / TIRES BRAKE / DECK LIFT... MOWER DECK / CUTTING DECK GUARDS SEAT DECALS ACCESSORIES BAGGER... MOUNTS, CHUTES, WEIGHTS MULCH KIT NOTE: ALL FASTENERS ARE GRADE 5 UNLESS OTHERWISE SPECIFIED.

4 FRAME

5 FRAME ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION FRAME TUBE, LH BLU FRAME TUBE, RH BLU BAR, IMPACT BLU PANEL, SEAT SUPPORT BLU FOOT PLATE BLU FOOT REST BLU BRACKET, FRONT DECK BLK FOAM STRIP SUPPORT, TANK BLK PLATE, RH BLU PLATE, LH BLU STUD w/ ANTI-ROTATE GROMMET, BUMPER RETAINER, U TYPE HAIRPIN HCS 5 /-18 x 2¼ HCS 3 /8- x 2¼ HCS 5 /-18 x ¾ HCS 5 /-18 x 2¾ SCREW ¼-20 x 5 /8 SLF TAP HHFS 3 /8- x 2¾ HCS ½-13 x 2¾ RHSNB 3 /8- x RHSNB 3 /8- x ¾ RHSNB 5 /-18 x ¾ WASHER 5 / SAE FLT WASHER 3 /8 SAE FLT WASHER 5 /8 SAE FLT NUT 3 /8- HEX JAM NYLOC NUT 3 /8- HEX FLG NYLOC NUT 5 /-18 HEX FLG NYLOC 5

6 ENGINE PLATE

7 ENGINE PLATE ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION PLATE, ENGINE BLU PULLEY, IDLER PULLEY, ENGINE IDLER, BLK KEY ¼ SQ x 2½ LG SPRING 3½ GUIDE, BELT BUSHING, METAL HCS 5 /-18 x HCS 3 /8- x HCS 5 /-18 x 2¼ HCS 7 /-20 x 2¾ HCS 3 /8- x 1½ BOLT 3 /8- x 1 THD FRM SCREW 3 /8- x 1 THD FRM WASHER 3 /8 FLAT STD WASHER WASHER 5 / SAE FLAT NUT 5 /-18 HEX NYLOC NUT 5 /-18 HEX WHIZLK NUT 3 /8- HEX JAM NYLOC NUT 5 /-18 HEX FLG NYLOC NUT 3 /8- HEX NYLOC NUT 3 /8- HEX FLG NYLOC 7

8 STEERING

9 STEERING ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION LOWER LEVER, RT LOWER LEVER, LT SUPPORT, STEER CNTRL RT SUPPORT, STEER CNTRL LT PIVOT, RT PIVOT, LT GRIP LEVER, UPPER DAMPENER BUSHING ½ ID x ¾ OD BUSHING ZERK HCS 5 /-18 x 1½ HCS ½-13 x 2¾ HCS 5 /-18 x HCS 5 /-18 x HCS ¼-20 x 1¾ RHSNB 5 /-18 x ¾ HCS 5 /-18 x 2½ TPBLT WASHER ½ SAE WASHER 5 /8 BELLEVILLE WASHER, SPECIAL WASHER 5 / SAE FLT NUT 5 /-18 HEX NUT 5 /-18 HEX WHIZLK NUT 5 /-18 HEX NYLOC NUT ½-13 JAM NYLOC GR NUT 5 /8-11 NYLOC NUT ¼-20 JAM NUT 5 /-18 HEX FLG NYLOC 9

10 10 FUEL SYSTEM

11 FUEL SYSTEM ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION FENDER, RH FENDER, LH SWITCH SWITCH, IGNITION SWITCH, INTERLOCK SOLENOID HOLD DOWN, BATTERY KEY, IGNITION MOUNT, CONTROL BLK CABLE, THROTTLE CABLE, CLUTCH CLUTCH ASSY w/ CABLE KNOB, CLUTCH TERMINAL COVER, SM TANK ASSY, FUEL CAP, FUEL w/ TETHER ELBOW BATTERY GROMMET, TANK GROMMET, CHECK VALVE GROMMET, RUBBER VALVE, FUEL VALVE, FUEL CHECK CLAMP, HOSE CLAMP, HOSE HOSE ¼ x HOSE, ¼ x HOSE, FUEL, 3 /" x 20" WIRE TIE w/ CLIP CABLE, POSITIVE 31" CABLE, POSITIVE 19" CABLE, NEGATIVE 25" HCS ¼-20 x ¾ SCREW #10-24 x 5 / RHSNB 5 /-18 x ¾ RHSNB ¼-20 x ¾ GR BOLT ¼ x 7½ SCREW ¼-20 x 5 /8 SLF TAP WASHER ¼ FLT SAE NUT 5 /-18 HEX FLG NYLOC NUT ¼ PUSH NYLON NUT #10-24 HEX NYLOC NUT ¼-20 HEX NYLOC NOT SHOWN WIRING HARNESS 11

12 HYDRAULIC PUMP / MOTOR

13 HYDRAULIC PUMP / MOTOR ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION HYDRO, RH HYDRO, LH ROD END, RH ROD END, MALE LH RELEASE HANDLE, RH RELEASE HANDLE, LH BELT, EZT SPACER, HYDRO SPACER, WHEEL ROD, CONTROL ROD END COUPLER HCS 5 /-18 x 2¾ HCS 5 /-18 x 2¼ HCS 5 /-18 x HCS 3 /8- x 2¼ NUT 5 /-18 HEX FLG NYLOC NUT 5 /-24 HEX JAM NUT 5 /-24 HEX JAM LH WASHER 3 /8 STD FLT WASHER 5 / SAE FLT HAIRPIN COTTER 13

14 WHEELS / TIRES

15 WHEELS / TIRES ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION WHEEL ASSY REAR CASTER TIRE ASSY YOKE, CASTER BLU ZERK BUSHING, CASTER SPACER SPACER 5 / VALVE SPRING, CASTER CAP, GREASE PLUG, CASTER BEARING, FLANGED HHB 5 /-18 x 1 NYLOC RHSNB ½-13 x 6½ NUT ½-20 LUG NUT ½ HEX CNTRLK WASHER WASHER ½ FLAT 15

16 BRAKE / DECK LIFT

17 BRAKE / DECK LIFT ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION HANDLE, LIFT BLK SHAFT, LIFT BLK LINKAGE, BRAKE RT LINKAGE, BRAKE LT LINKAGE, UPPER PIVOT, BRAKE ARM HANDLE, BRAKE BELLCRANK, BRAKE ROD, BRAKE GRIP, LIFT HANDLE GRIP, BRAKE HANDLE SWIVEL, BRAKE SWIVEL SPRING L-ROD 3½" HAIRPIN COTTER HAIRPIN BUSHING, PLASTIC PIN 3 / x 1¼ ROLL RHSNB 3 /8- x 1¼ NUT 3 /8- HEX NYLOC NUT 5 /-18 HEX NYLOC NUT 3 /8- HEX JAM NYLOC WASHER 7 / SPRING DISK WASHER 3 /8 FLAT STD WASHER 5 / SAE FLAT WASHER,.825 WAVE 17

18 18 MOWER DECK / CUTTING DECK

19 MOWER DECK / CUTTING DECK ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION DECK w/ SAFETY DECALS PULLEY, MANDREL PULLEY, IDLER PULLEY, DECK IDLER IDLER, V-GROOVE COVER, PULLEY KEEPER, BELT KEEPER, BELT GUIDE, BELT ARM, IDLER BLK ARM, LT BRAKE BLADE, MOWER/MULCH SWIVEL BEARING, BALL BRACKET, DEFLECTOR LINK, SUSPENSION SPACER RETAINER SPACER 2¼ SPRING, RETURN SPRING, TORSION MANDREL CHUTE, DISCHARGE SHAFT BELT, DECK ARM, DECK SUSPENSION COUPLING, QUICK DISC WASHOUT PORT HAIRPIN COTTER HAIRPIN PIN, CLEVIS 5 / BOLT/WASHER BOLT 3 /8- x 1 ¾ WHIZLK BOLT 3 /8- x 3 /8 SKT HD BOLT 3 /8- x 1½ THD FRM SCREW 5 /-18 WASHER HD SCREW ¼-20 x ½ THDROLL HCS 3 /8- x RHSNB 3 /8- x RHSNB 5 /-18 x 5 / NUT 3 /8- HEX JAM NUT 7 /-20 HEX NYLOC NUT 9 / TOP CNTRLK NUT 5 /-18 HEX FLG NYLOC NUT 3 /8- HEX FLG NYLOC WASHER 3 /8 SAE FLT WASHER/SPACER WASHER 3 /8 x ¾ WASHER ½ SAE WASHER 1¾ x ¼ HEAVY WASHER 3 /8 FLAT STD WASHER 7 / FLAT 19

20 GUARDS

21 GUARDS ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION GUARD, LT BLK GUARD, REAR BLK GUARD, SPINDLE BLK GUARD, CLUTCH BLK GUARD, MUFFLER SCREW ¼ -20 x 5 /8 THDROLL SCREW PALNUT ¼" NOT SHOWN GUARD, ENGINE SCREW, ENGINE GUARD 21

22 SEAT

23 SEAT ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION SEAT CAP, SPRING SEAT SUPPORT, REAR BLU BOLT 5 /-SHOULDER BRACKET, FUEL TANK BLK HCS 3 /8- x 5 / SPRING, SEAT HCS 5 /-18 x ¾ SPRING, SEAT SLIDE SCREW ¼-20 x 5 /8 SLF TAP PLATE, SEAT BLU RHSNB 3 /8- x ¾ SWITCH, SEAT N/C NUT 5 /-18 HEX FLANGE NYL STOP, SEAT BLK NUT 3 /8- HEX FLG NYLOC HANDLE, SEAT SLIDE 23

24 DECALS

25 DECALS ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION DECAL, BATTERY WARNING DECAL, PARK BRAKE DECAL, BELT ROUTING DECAL, SAFETY WARNING DECAL, BLADE ENGAGE DECAL, SERVICE DECAL, CONTROL PANEL DECAL, SEVERING DECAL, DECK HEIGHT DECAL, SPEEDZTR DECAL, DEFLECTOR DECAL, WARNING DECAL, DIXON DECAL, SOUND POWER DECAL, DO NOT TOW PAD, ABRASIVE DECAL, MOTION CONTROL 25

26 ACCESSORIES BAGGER

27 ACCESSORIES ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION COVER ASSY, COMPLETE CONTAINER, SOFT BAG SCREEN, COVER BAGGER, FRAME STRIP, REINFORCEMENT LATCH HANDLE, COVER GASKET SPRING, COVER LH SPRING, COVER RH SPACER, COVER HAIRPIN, RETAINER CAP, TUBING END SPACER PLUG PIN, HINGE SCREW #10-24 x 5 / SCREW #10-24 x ¾ NUT #10-24 HEX NYLOC NUT #10-24 ACORN WASHER #10 FLAT 27

28 accessories MOUNTS, CHUTES, WEIGHTS

29 accessories ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION GUARD, REAR CHUTE, LOWER CHUTE, UPPER BRACKET, HANGER BRACKET, WEIGHT BAG INDICATOR CAST WEIGHT EXTENSION, MUFFLER LATCH, HOOD SPACER, SPLIT WELDNUT, PLATED LATCH ASSY PIN, CLEVIS 5 / x COTTER HAIRPIN HCS 5 /-18 x ¾ HCS 3 /8- x 2¼ RHSNB 3 /8- x ¾ RHSNB 5 /-18 x ¾ RHSNB 3 /8- x RHSNB 3 /8- x 1¼ SCREW #10-24 x 1 1 / SCREW #10-24 x SCREW, HEX WASHER HD SCREW, SPECIAL #10-14 x ½ NUT 5 /-18 HEX FLG NYLOC NUT 3 /8- HEX FLG NUT #10-24 ACORN WASHER 3 / x ¾ x GA WASHER 3 / LOCK 29

30 accessories MULCH KIT

31 accessories ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION COVER LATCH ASSY WELDNUT, PLATED WASHER WASHER LOCK SCREW 31

32