UPPER ENGINE DECK ASSY FIGURE 1. ZT 200 Series

Transcription

1 UPPER ENGINE DECK ASSY FIGURE 1 ZT

2 ZT UPPER ENGINE DECK ASSY FIGURE 1 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY ENGINE-KOHLER CV25S 1 (SERVICE MANUAL KOHLER #TP-2475-A) FILTER-AIR KOHLER FILTER-PRE KOHLER ELEMENT-KLR OIL FILTER FILTER-FUEL PUMP-HYDRO BDP-10A (SEE FIGURE 8 FOR BREAKDOWN) S-ENG DECK W/DECAL BATTERY BRACKET-RELAY MNTNG S HYD RESERVOIR W/LAB BLT-FLG HD M X BLT-TR 3/8-16X1 1/ WASHER-M BOLT-BENT BATT. HOOK NUT-WLF 3/ LOCKNUT-NYLON M ARM-PUMP ROD END BALL JOINT TURNBUCKLE BLT-MET M X LOCKNUT-NYLON 5/ BRKT-REVERSE RETURN A BLT-M X WIZ NUT-MET M BLT-HEX 5/16-24 X BEARING-SELF ALIGNED N CLEVIS-YOKE PLATE PIN-CLEVIS 5/16 X HAIRPIN COTTER NUT-HEX 5/ SPRING-COMPRESSION DAMPENER WLDMT-MTN CTRL RH 1 * WLDMT-MTN CTRL LH LOCKNUT-NYLON M ROD END BALL JOINT HOLD DOWN, BATTERY SETSCR SQHD 5/16-18X3/ BOOT, BAT TERM POS SWITCH, DBL POLE SWITCH NONO DBL POLE BLT-TDFM #10-32X1/2 TRX MODULE-DELAY GASKET-MUFFLER 2 (OBTAIN THROUGH KAWASAKI DEALER) PLATE, KICK BLT-M10-1.5x WASHER.328X.75X14 GA STRIP, WEAR BLT-HEX 3/8-16X3/ SCREW 1/4-20X3/ S BRG FLGD PLASTIC BUMPER-RUBBER PLUG-PIPE 3/8" BLT-CRG M10-1.5X VIDEO-BOBCAT 100/ SCR-SLT HH # NUT-HEX #10-24 KEPS LOCKNUT-NYLON 5/ NUT- 5/16-24 LH A NIPPLE-PIPE 3/8 X ELBOW-3/8 PIPE, 90 DEG ENGINE-KAWASAKI FHV FILTER-AIR KAWASAKI FILTER-PRE KAWASAKI FILTER-OIL FILTER-FUEL 1 (ITEMS 39, 46 & FOR USE WITH KAWASAKI ENGINES ONLY) BLT-FLG HD M X NUT-FL LOCK M ASSY-MUFFLER SOLENOID BRKT-MUFFLER LH 1 * BRKT-MUFFLER RH BLT-FLG HD M6-1.0 X ENG-KOHLER LV675 23HP FILTER-AIR KOHLER FILTER-PRE KOHLER FILTER-OIL FILTER-FUEL ENG-KAW FHV 23 HDAC S-AIR FILTER PRIMARY S-AIR FILTER SAFETY FILTER-OIL FILTER-FUEL COVER-TERMINAL 1 * NOT ILLUSTRATED 27

3 LOWER ENGINE DECK ASSY/CLUTCH FIGURE 2 ZT

4 ZT LOWER ENGINE DECK ASSY/CLUTCH FIGURE 2 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY PULLEY-PUMP SCREW-SET 1/4-20X1/ KEY-MET 5mm SQX28mm /4X1/4X1 1/4 SQ END KEY PULLEY-4.25 ENGINE CLUTCH-ELECTRIC 1 (USE ON ALL MODELS EXCEPT 19HP) (INCLUDES ITEMS 29 & 30) CLUTCH-ELECTRIC 19HP 1 (USE ON 19HP MODELS ONLY) (INCLUDES ITEMS 29 & 30) WLDMT-CLUTCH STOP 1 (USE ON ALL MODELS EXCEPT 19HP) WLDMT-CLUTCH STOP 1 (USE ON 19HP MODELS ONLY) WLDMT-BRKT CLUTCH BEARING-PLASTIC BLT-MET M8-1.25X BLT-TR 3/8-16X1 1/ LCKWSHR-HELICAL 7/ NUT-FL NYL LOCK M PULLEY-IDLER 4.00 E.O.D WLDMT-IDLER ARM N STRAIGHT ZERK FITTING WASHER 18 GA A BEARING-BUSHING SPACER SPRING-TENSION LCKWSHR-HELICAL 3/ BLT-HEX 3/8-24X1 1/ S ENGINE DECK W\LABS E-RING BELT-TRACTION DRIVE BLT-HEX 7/ BLT-MET M6-1X WASHER-CONICAL SPRING ASSY-CLUTCH WIRE * KIT-BRAKE POLE RPLCMNT 1 * NOT ILLUSTRATED 29

5 CRADLE ASSEMBLY FIGURE 3 ZT

6 ZT CRADLE ASSEMBLY FIGURE 3 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY LABEL-WARN/USING BRKT-SHAFT HANGER CHAIN LINKS MAT-FOOT PLATE LOWER MAT-FOOT PLATE MIDDLE MAT-FOOT PLATE UPPER LABEL-BOBCAT DIE CUT S-FOOT PLATE 1 (INCLUDES 4-7, 9 & 16) RIVET-POP IFI # E-RING WLDMT-DECK LIFT, FRONT WLDMT-DECK LIFT, REAR CLIP-DECK HEIGHT ADJ SPRING-DECK LIFT 2 (NOT USED ON 48" DECKS) WLDMT-CRADLE HANDLE W/SLOT ROD-DECK LIFT * BRKT-SPRING ANCHOR, LH BRKT-SPRING ANCHOR, RH ROD-SPRING MOUNT NUT-WLF 1/ NUT-WLF 3/ (ITEMS NOT USED ON 48" DECKS) BLT-TDFM 1/4-20X1-1/ BLT MET M X BLT-MET M12X1.75X BLT-MET M X LOCKNUT-NYLON M (QTY 17 USED ON 48" DECKS) NUT-WHIZ M N ZERK, 1/ ZERK-1/8 PIPE BLT-FLG HD M X A SCREW,M10X1.5X30 HH 4 (NOT USED ON 48" DECKS) NUT-FL NYL LOCK M WSHR.890X1.375X18GA 8 *NOT ILLUSTRATED 31

7 DECALS FIGURE 4 ZT

8 ZT DECALS FIGURE 4 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY LABEL-BOBCAT DIECUT LABEL-BOBCAT TEXTRON LABEL-OPER MAN LABEL, WARN BATTERY LABEL - HYDR OIL FILL LABEL-CONTROL PANEL LABEL - PARK BRAKE LABEL(DBL) - FUEL/LEAKS LABEL-TIRES LABEL - RH TRACTION LABEL - LH TRACTION LABEL-HT CUT OUTER LABEL-HT CUT INNER LABEL - WARN/USING LABEL-FUEL LABEL-ZT 219 DIE CUT LABEL-ZT 223 DIE CUT LABEL-ZT 225 DIE CUT 1 (ITEMS 19 & 20 USED ON LIQUID COOLED MODELS ONLY) LABEL-ZT223LC DIE CUT LBL-CNTRL PNL ZT 223LC DECAL-CAUTION SPANISH 1 33

9 BUMPER FIGURE 5 ZT

10 ZT BUMPER FIGURE 5 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY ARM-BUMPER S ENG DECK W/LABS WLDMT-BUMPER BLT-FLG HD M X NUT-FL NYL LOCK M BRACE-VERTICAL 1 35

11 BRAKES/REAR WHEEL FIGURE 6 ZT

12 ZT BRAKES/REAR WHEEL FIGURE 6 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY S ENGINE DECK W\LABS WLDMT-BRAKE ARM LH WLDMT-BRAKE ARM RH SPRING-EXTENSION WLDMT-BRAKE LEVER ROD-SPD CTRL LH UPPER GUIDE-SPRING N CLEVIS-YOKE PLATE ASSY BRAKE CW (LH) 1 * ASSY BRAKE CCW (RH) WSHR IDX14 GA A/R SHAFT-BRAKE MOTOR-ASSY HYDRAULIC 2 (INCLUDES ITEMS 32 & 33) RIM ASSY W/VALVE STEM TIRE 23 X 10.5 X 12 2 (ITEM 13 USED ON & ) RIM ASSY W/VALVE STEM TIRE-23 X (ITEM 14 USED ON & ) BOLT-WHEEL 7/ PIN-CLEVIS 5/16X ROLL-PIN 1/4X1 1/ GRIP, 1/4X1X4 1/ SPACER, 32MM LONG HUB-WHL & DISC N STRAIGHT ZERK FITTING SNAP RING BRG-.75ID BRNZ SLF ALIGN BLT-HEX 3/8-16X3/ NUT-WLF 3/ NUT-HEX M HAIRPIN COTTER NUT-HEX 5/ LCKWHSR-HELICAL 1/ WLDMT-PRKING BRKE ROD CAPSCREW X S-KEY / WHEEL MOTOR NUT1-20 UNSLOTTED TRW RIM ASSY W/VALVE TIRE 24X NHS 4 PLY 2 (ITEM 34 USED ON , & ) SERVICE PARTS FOR AND QTY/ASSY BRACKET-MACHINED PAD-CAM SIDE PAD-SUPPORT SPRING-LEVER RETAINER HOUSING CAM LH PIVOT PIN PAD-CARRIER SIDE PAD-SUPPORT *CAM RH 1 * NOT ILLUSTRATED BRAKE ASSEMBLY BREAKDOWN 37

13 HYDRAULICS FIGURE 7 ZT

14 ZT HYDRAULICS FIGURE 7 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY S HYD RESERVOIR W/LAB FILTER 25 MICRON CAP-RESERVOIR PLUG-MAGNETIC FTG-90 BRB 9/16-18X ELBOW-MALE ORB 4 ( IS A SERVICEABLE LENGTH OF 55") 7-7A /8 HIGH TEMP HSE 18" 1 7-7B /8 HIGH TEMP HSE 15" 1 7-7C /8 HIGH TEMP HSE 19" 1 7-7D /8 HIGH TEMP HSE 12" 1 7-7E /8 HIGH TEMP HSE 22" 1 7-7F /8 HIGH TEMP HSE 26" 1 7-7G /8 HIGH TEMP HSE 5" HOSE HYD ORB (QTY OF 1 FOR KAWASAKI ENGINE) HOSE HYD ORB MOTOR-ASSY HYD FTG 9/16-18 ORB X 3/ WAY CONNECTOR 3/ CLAMP-HOSE 5/ PUMP-HYDRO BDP-10A FITTING-3/8 BARB 1/ OIL COOLER FTG-STRGHT 8 ORB X 8 JIC HOSE-1/2 37/ (ITEMS 17&18 FOR KAWASAKI ENG ONLY) BOLT, 1/4-20X2 HEX LOCKNUT-NYL 1/ PART NUMBER SAE PORT 'O' RING T HREAD SIZE AS-568# / / / / / / /

15 HYDROGEAR PUMP FIGURE 8 ZT

16 ZT HYDROGEAR PUMP FIGURE 8 ITEM HYDROGEAR PART NO. TEXTRON PART NO. DESCRIPTION QTY HOUSING KIT END CAP KIT STRAIGHT HEADLESS PIN FLANGE BOLT M X HOUSING O-RING CHARGE PUMP KIT STD GEROTOR ASSEMBLY O-RING SOCKET SCREW M6-1.0 x BYPASS VALVE KIT (BLANK) PUMP SHAFT KIT BALL BEARING 17 X 40 X LIP SEAL 17 x 40 x SPACER RETAINING RING CYLINDER BLOCK KIT BLOCK SPRING BLOCK THRUST WASHER VALVE PLATE SWASH PLATE BALL THRUST BEARING ARM-TRUNION SLOT GUIDE A SHOCK VALVE KIT (.031") B SHOCK VALVE KIT (BLANK) CHARGE RELIEF VALVE KIT TRUNNION SEAL/RETAINER KIT STRAIGHT THREAD PLUG /16 SAE PLUG OVERHAUL SEAL KIT 1 41

17 KOHLER WIRE HARNESS-LIQ. COOLED FIGURE ZT

18 ZT KOHLER WIRE HARNESS-LIQ. COOLED FIGURE 9 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY HARNESS-WIRING FUSE-20 AMP CABLE-BATTERY SWITCH-SEAT NO WIRE-SEAT SWITCH N HOUR METER ASSY CABLE-BATT W/CONDUIT 1 (INCLUDES ITEMS 16 & 17) KEY-SWITCH RELAY MODULE-DELAY SWITCH-CLUTCH CLUTCH-ELECTRIC 1 (USE ON ALL MODELS EXCEPT 19HP) (INCLUDES WIRE ASSY) CLUTCH-ELECTRIC 19HP 1 (USE ON 19HP MODELS ONLY) (INCLUDES WIRE ASSY) ASSY-CLUTCH WIRE SWITCH-DBL POLE SWITCH-NONO DBL POLE BOOT-BAT TERM POS COVER-TERMINAL HARNESS-JUMPER GAUGE-TEMP 240 DEG 1 43

19 KOHLER WIRE HARNESS FIGURE ZT 200 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY HARNESS-WIRING FUSE-20 AMP CABLE-BATTERY SWITCH-SEAT NO WIRE-SEAT SWITCH N HOUR METER ASSY CABLE-BATT W/CONDUIT 1 (INCLUDES ITEMS 16 & 17) KEY-SWITCH RELAY MODULE-DELAY SWITCH-CLUTCH CLUTCH-ELECTRIC 1 (USE ON ALL MODELS EXCEPT 19HP) (INCLUDES WIRE ASSY) CLUTCH-ELECTRIC 19HP 1 (USE ON 19HP MODELS ONLY) (INCLUDES WIRE ASSY) ASSY-CLUTCH WIRE SWITCH-DBL POLE SWITCH-NONO DBL POLE BOOT-BAT TERM POS COVER-TERMINAL HARNESS-JUMPER 2 44

20 ZT 200 KOHLER WIRING HARNESS FIGURE 10 45

21 KAWASAKI WIRING HARNESS FIGURE ZT

22 ZT KAWASAKI WIRE HARNESS FIGURE 11 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY HARNESS-WIRING FUSE-20 AMP CABLE-BATTERY SWITCH-SEAT NO WIRE-SEAT SWITCH N HOUR METER ASSY CABLE-BATT W/CONDUIT 1 (INCLUDES ITEMS 20 & 21) KEY-SWITCH RELAY MODULE-DELAY SWITCH-CLUTCH CLUTCH-ELECTRIC 1 (USE ON ALL MODELS EXCEPT 19HP) (INCLUDES WIRE ASSY) CLUTCH-ELECTRIC 19HP 1 (USE ON 19HP MODELS ONLY) (INCLUDES WIRE ASSY) ASSY-CLUTCH WIRE SWITCH-DBL POLE SWITCH-NONO DBL POLE SOLENOID HARNESS-JUMPER CABLE-SOL/STARTER WIRE-GROUND BOOT-BAT TERM POS COVER-TERMINAL HARNESS-JUMPER 2 47

23 FUEL TANKS/CONTROL PANEL FIGURE 12 ZT

24 ZT FUEL TANKS/CONTROL PANEL FIGURE 12 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY TANK-FUEL LH 1 (INCLUDES ITEMS 18 & 19) TANK-FUEL RH 1 (INCLUDES ITEMS 18 & 19) S CONTROL PANEL W/LAB S ENG DECK W/LABS S DOC TUBE W/LABS CAP-FUEL TANK CLAMP-DOC TUBE BLT-MET M10-1.5X A SPINDLE-SHIELD SWITCH-RETAINER BLT-FLG HD M6-1.0 X N HOSE CLAMP KEY-SWITCH CONTROL THROTTLE 1 (USE WITH KOHLER ENGINES) CONTROL, THROTTLE 1 (USE WITH KAWASAKI ENGINES) SWITCH-CLUTCH NUT-HEX #10-24 KEPS SCR.-SLT HH #10-24X1/ S BUSHING, FUEL TANK S FUEL SHUTOFF VALVE LOCKWASHER M WASHER-M VALVE-TANK SELECTOR A HOSE 1/4IDX1/2ODX A HOSE 1/4IDX1/2ODX A HOSE 1/4IDX1/2ODX FUEL FILTER S-KEY SWITCH NYLON NUT S-COVERED KEY 1 (ITEMS 29 & 30 USED ON LIQUID COOLED MODELS ONLY) GUAGE-TEMP 240 DEG S-CONTROL PNL ZT 223LC 1 49

25 OIL COOLER FIGURE 13 ZT

26 ZT OIL COOLER FIGURE 13 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY S ENGINE DECK W/LABS BRKT-COOLER FRONT BRKT-OIL COOLER SCREEN-OIL COOLER COOLER-OIL S HYD RSRVR W/LABS 1 ( IS A SERVICEABLE LENGTH OF 55") 13-7A /8 HIGH TEMP HOSE 26" B /8 HIGH TEMP HOSE 22" A CABLE-CLIP 3/4 W/INSTN CLAMP-HOSE 5/ WAY CONNECTOR 3/ ARM-BUMPER LOCKNUT-NYLON M BRKT-COOLER NUT-FL NYL LOCK M BLT-FLG HD M X BLT-FLG HD M6-1.0 X

27 OIL COOLER-LIQUID COOLED FIGURE 14 ZT

28 ZT OIL COOLER-LIQUID COOLED FIGURE 14 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY S ENGINE DECK W/LABS BRKT-UPPER OIL COOLER BRKT-OIL COOLER 223LC SCREEN-OIL COOLER COOLER-OIL S HYD RSRVR W/LABS 1 ( IS A SERVICEABLE LENGTH OF 55") 14-7A /8 HIGH TEMP HOSE 30" B /8 HIGH TEMP HOSE 34" BLT-FLG HD M6-1.0 X CLAMP-HOSE 5/ WAY CONNECTOR 3/ ARM-BUMPER BLT-FLG HD M X LOCKNUT-NYLON M NUT-FL NYL LOCK M

29 SEAT ASSEMBLY & ROPS FIGURE 15 ZT

30 ZT SEAT ASSEMBLY & ROPS FIGURE 15 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY SEAT-SUSPENSION 1 (INCLUDES ITEMS 2-10) SEAT CUSHION BACK CUSHION CABLE ASSEMBLY 2 (INTERNAL SEAT COMPONENT NOT ILLUSTRATED) ASSY-SEAT BACK PANEL RH ARM REST LH ARM REST SWITCH, SEAT NO BLT-HEX 5/16-18X1-1/ BLT-HEX 1/4-20X1/ SLIDE RAIL-ADJ SLIDE RAIL-SLAVE SPACER-NYLON 5/8" SPACER-NYLON 3/8" WIRE-SEAT SWITCH PLATE-SEAT NUT-WLF 5/ SCREW-CAP WSHR HD PIN-CLEVIS3/8X1-3/8W/OHL PUSHNUT 3/8 DIA BRG-NYLINER 3/ A CABLE CLIP-INSULATED SCREW 1/4-20X3/ BLT-WLF 5/16-18 X 3/4 6 OPTIONAL ROPS: ATT-ROPS (INCLUDES ITEM 22) * S-SEAT BELT 1 * NOT ILLUSTRATED 55

31 STEERING/DECK LIFT FIGURE 16 ZT

32 ZT STEERING/DECK LIFT FIGURE 16 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY S ENGINE DECK W/LABS N HOUR METER ASSY VALVE-TANK SELECTOR CONTROL-CHOKE (USE WITH KOHLER ENGINES) CONTROL-CHOKE (USE WITH KAWASAKI & LIQUID COOLED ENGINES) LEVER-CONTROL BRKT-TRACTION LEVER BRACKET-HANDLE GRIP-.75 IDX BEARING-SELF ALIGNED BLT-HEX 3/8-16X3/ NUT-WLF 3/ WLDMT-MTN CONTRL RH 1 * WLDMT-MTN CONTRL LH BLT-MET M10-1.5X A BLT-MET M10-1.5X LOCKNUT-NYLON M LOCKWASHER-M NUT-HEX 3/ A BLT-MET M10-1.5X SPACER WLDMT-CRADLE HAIRPIN COTTER WLDMT-DECK LIFT LEVER WLDMT-LVR STOP LATCH BRKT-INNER DECK LIFT BRKT-OUTER DECK LIFT BRACKET-LIFT LINK HANDLE-LIFT ARM ASSY, PIN & LANYARD PIN-CLEVIS 1/2X BLT-MET M10-1.5X N ZERK, 1/4-28 STR SLF TH E-RING NUT-PUSH 5/ PIN, CLEVIS 7/16X1-1/ GRIP SPACER ROLL PIN-1/8X1.00 SS SPRING-COMPRESSION HAIRPIN COTTER WSHR.890X1.375X18GA LBL-ZT200 HT CUT OUTER LBL-ZT200 HT CUT INNER WSHR 1.12X.390X19 GA ROD-LIFT STOP BLT-MET M X PLATE-CHOKE MOUNT /4-20X3/8 LG SP SCREW BLT-FLG HD M X NUT-FL NYL LOCK M WSHR.443/.454X1X11GA 1 * NOT ILLUSTRATED 57

33 CRADLE & CASTER ASSEMBLY FIGURE 17 ZT

34 ZT CRADLE & CASTER ASSEMBLY FIGURE 17 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY C S CUP,OUTER BEARING WLDMT-CASTER YOKE DECK/W LABS BOLT-HEX 3/4-10X7 1/ WHEEL-13X ASSY 2 (INCLUDES ITEMS 6, 7 & 9) TIRE-13X SMOOTH BEARING SPACER-END RIM-13"ASSY W/VLV STEM WSHR 1.015X14GA LOCKNUT-NYLON 3/ N ZERK, 1/4-28 STR SLF THD SPANNER-13" WHEEL DUST COVER C S CONE,OUTER BEARING BLT-MET M12X1.75X NUT-WHIZ M WLDMT-CASTER LH 48 SD WLDMT-CASTER RH 48 SD 1 (USE ON 48" DECK ) WLDMT-CASTER 52 LH WLDMT-CASTER RH 52 SD 1 (USE ON 52" DECK ONLY) WLDMT-CASTR ARM 61 LH WLDMT-CASTR ARM 61 RH 1 (USE ON 61" SD DECK ONLY) A BOLT-M X LOCKNUT-NYLON M WLDMT-CRADLE NUT-HEX 3/4-16 SLOT U COTTER PIN-1/8 X 1-1/ SEAL 2 59

35 48" SIDE DISCHARGE FIGURE 18 ZT

36 ZT " SIDE DISCHARGE FIGURE 18 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY BLADE OFFST HLFT PULLEY, IDLER SHAFT-SPINDLE LONG SHAFT-SPINDLE WLDMT-LOCK, PUSHBAR WLDMT-DECK IDLER WLDMT-PUSHBAR ROD END 5/ SPACER-BLADE SPRING-EXTENSION PULLEY-ENGINE S-DECK 48 SD W/LABS BRKT-DECK HANGER LH BRKT-DECK HANGER RH BRKT-HANGER REAR BRKT-PUSHARM MTG COVER-BELT LH COVER-BELT RH BRKT-SPRING ANCHOR WLDMT-IDLER ARM PIN-PIVOT WLDMT-ROLLER BRKT LH WLDMT-ROLLER BRKT RH BRKT-ROLLER LH BLT-CRG 1/4-20X3/ NUT-SPINDLE SPACER-ROLLER S-DECK STIFFNR W/LABS PIN-PIVOT ASSY-SPINDLE CENTER ASSY-SPINDLE CHUTE-DISCHARGE PULLEY-IDLER BAFFLE-FRONT RH BAFFLE-FRONT LH KNOB-4 PRONG 3/ ROLLER-5X2.75 CENTERED PULLEY-V-IDLER NUT-HEX JAM, 5/ LOCKWASHER-1/ BLT-HEX 1/2-20 X 1-1/ BLT-HEX 5/8-11 X 4-1/ BLT-HEX 5/8-18 X 1-1/ BLT-HEX 5/8-18 X 3-1/ BLT-HEX 3/8-16 X NUT-NYLON 1/ WASHER-1-1/32X1-3/4X1/ WASHER-.383/.393X E-RING WASHER-.890X1.375X18GA WASHER-.625X1.12X KEY-SQUARE-1/4 X 1/4 X BLT-MET M X BLT-SHLDR 3/8-16 X BLT-THRDFM 3/8-16 X BLT-HEX 3/8-16 X 1-3/ BLT-MET M X BLT-MET M X NUT-WLF 3/ BLT-METRIC M10-1.5X BLT-MET M X A BOLT-M X SPRING WASHER LOCKNUT-NYLON 3/ LOCKNUT-NYLON 5/ LOCKNUT-NYLON M NUT-WLF M NUT-WLF M WASHER-M PULLEY-5.25 DEEP GRV BLT-CRG 3/8-16X1-3/ BEARING-SPINDLE SPINDLE HOUSING SNAP-RING BLADE ELIMINATOR 3 (OPTIONAL) , ASSY TOP SPINDLE CENTER (INCLUDES ITEMS 3, 26 & 72-74) ASSY TOP MOUNT SPINDLE (INCLUDES ITEMS 4, 26 & 72-74) 61

37 52" & 61" SIDE DISCHARGE FIGURE 19 ZT ASSY TOP MOUNT SPINDLE ASSY TOP MOUNT SPINDLE (INCLUDES ITEMS 33-37) ASSY TOP MNT SPINDLE 52" ASSY TOP MNT SPINDLE 52" (INCLUDES ITEMS 34-37, 49) 62

38 ZT " & 61" SIDE DISCHARGE FIGURE 19 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY S-52INCH DECK W/LABELS BELT COVER RH 1 (USE ON 52" SD DECK ONLY) BELT COVER LH 1 (USE ON 52" SD DECK ONLY) KNOB-4 PRONG 3/ CHUTE-MID 61 1 (USE ON 61" SD DECK ONLY) CHUTE-DISCHARGE MIDSZ 1 (USE ON 52" SD DECK ONLY) BLT-SHLDR 3\8-16X LOCKNUT NYLON 3/ BOLT-MET M10-1.5X110 (USE QTY 6 ON 52", QTY 7 ON 61") ROLLER-5X2.75 CENTERED (USE QTY 6 ON 52", QTY 7 ON 61") BLT-MET M8-1.25X PULLEY ENGINE 3 (USE ON 52" SD DECK ONLY) BLADE 21.0 OFFST 3 (USE ON 61" SD DECK ONLY) BLADE 18.0 OFFST 3 (USE ON 52" SD DECK ONLY) SPACER-ROLLER (USE QTY 6 ON 52", QTY 7 ON 61") BLT-TDFM 3/8-16X1 (USE QTY 14 ON 61", QTY 12 ON 52") WLDMT-PTO IDLER BOLT-CARRIAGE 3/8-16X /4X1/4X2 SQ END KEY PULLEY, V IDLER IDLER, 5.0 OD FLNGD PULLEY, DECK DRIVE 1 (USE ON 61" SD DECK ONLY) SPRING WSHR.67 ID /4X1/4X1 SQ END KEY A ENGINE PULLEY 3 (USE ON 61" SD DECK ONLY) PULLEY, IDLER 5.50" WLDMT-DECK IDLER 1 (USE ON 61" SD DECK ONLY ) WLDMT-DECK IDLER 1 (USE ON 52" SD DECK ONLY) ASSY-TOP MNT SPNDLE 52" 2 (INCLUDES ITEMS 34-37, 49) (USE ON 52" SD DECK ONLY) ASSY-TOP MNT SPNDL 1 (INCLUDES ITEMS 33-37) (USE ON 61" SD DECK ONLY) WLDMT-PUSHBAR LCKWSHR HELICAL 1/ BLT-HEX 1/2-20X1 1/ WSHR.383/.393 X 7 GA WLDMT-LOCK PSHBR SPINDLE HOUSING 3 (USE ON 61" SD DECK ONLY) NUT-SPINDLE BEARING-SPINDLE SNAP-RING SHAFT-SPINDLE LONG 1 (USED IN ASSY ) SHAFT-SPINDLE 2 (USED IN ASSY ) N STRAIGHT ZERK FTTG ROD, END 5/ BLT-HEX 3/8-16X LOCKNUT-NYLON M BAFFLE-FRONT CENTER 1 (USE ON 61" SD DECK ONLY) SPACER-BLADE LOCKNUT-NYLON 5/ BLT-HEX 5/8-18 X BLT-HEX 5/8-18 X SUPPORT-BELT 2 (USE ON 61" SD DECK ONLY) BAFFLE-FRONT LH 1 (USE ON 61" SD DECK ONLY) HOUSING-SPINDLE 52" 3 (USE ON 52" SD DECK ONLY) ASSY-TOP MNT SPINDLE 52" 1 (INCLUDES ITEMS 34-37, 49) (USE ON 52" SD DECK ONLY) LOCKNUT-NYLON M10 12 (USE QTY 12 ON 52", QTY 13 ON 61") WSHR.890X1.375X18 GA E-CLIP GUIDE-BELT 1 (USE ON 61" SD DECK ONLY) NUT-JAM 5/ BLT-HEX 5/8-11X SPRING-EXTENSION WSHR-FLT.625IDX.062 A/R BAFFLE-FRONT LH 1 (USE ON 52" SD DECK ONLY) BAFFLE-FRONT RH 1 (USE ON 52" SD DECK ONLY) BLT MET M X BLT-CRG 1/4-20X3/ LOCK NUT-NYL 1/ S-61 CUTTERDECK W/LABS BELT COVER RH 1 (USE ON 61" SD DECK ONLY) BELT COVER LH 1 (USE ON 61" SD DECK ONLY) GUIDE-BELT ASSY-TOP MNT SPNDL 2 (INCLUDES ITEMS 33-37) (USE ON 61" SD DECK ONLY) WSHR 1.015X1.500X14GA BLADE ELIMINATOR 3 (OPTIONAL ON 61" SD DECK ONLY) BLADE ELIMINATOR 3 (OPTIONAL ON 52" SD DECK ONLY) 63

39 BELTS FIGURE 20 ZT

40 ZT BELTS FIGURE 20 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY BELT-CUTTERDECK BELT-PTO 54 1 (USE ON 52" SD DECK) BELT-CUTTERDECK BELT-PTO 1 (USE ON 61" SD DECK) BELT-CUTTERDECK BELT-PTO 1 (USE ON 48" SD DECK) 65

41 DECALS-CUTTERDECKS FIGURE 21 ZT

42 ZT DECALS-CUTTERDECKS FIGURE 21 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY LABEL-WARNING BLADES LABEL-WARNING LABEL-BLADE INSTALL ` LABEL-DANGER/WARNING 1 67