CATALOG GC Global Series Air Cylinders

Transcription

1 CTO C-1 19 lobal Series ir Cylinders

2 lobal Series Cylinders Providing Unmatched NO OO T YOU ET Here is FCO-I's Expanded ine of Space Saving ir Cylinders Innovation For years our famous Pancakes have dominated as the world's fi rst compact air cylinder line. Today, backed by decades of engineering innovation, our new lobal Series extruded body cylinders continue in the Pancake tradition with exceptional performance and the widest available selection of models and options. Packed with Value Tough, rigid, hard anodized aluminum extrusions house oversized hard chrome stainless steel piston rods for service to bar (1 psi). agnetic piston position sensing enables mid-stroke signaling and exact end-of-stroke sensing. ultiple dovetails each accoodate multiple switches without the need for switch mounting brackets. Duralon od earings Excel oad Capacity (psi) Friction Properties achine Design 197/73 Slip- earing eference Issue Coefficient stick Porous ronze...,0 Steel-on-steel.... Yes Porous iron... 8,000 ronze-on-steel....3 Yes Phenolics... 6,000 Nylon... 1,000 Sintered ronze-on-steel with mineral oil No TFE... 0 ronze-on-steel einforced Telfon...,0 with mineral oil.... No *TFE fabric... 60,000 Copper lead alloy-on-steel.... Yes Polycarbonate... 1,000 cetal-on-steel.... No cetal... 1,000 Nylon-on-steel....3 Yes Carbon-graphite Duralon-on-steel No * Shows Duralon bearing classifi cation. Not to be used for design purposes. Printed with permission by exnord Corp. Extra ong Piston od earing The better the bearing is, the more cycle life you can expect from your cylinders. nd lobal Series Cylinders incorporate a truly superior rod bearing material Duralon with the same fi eld-proven performance you have come to expect from the fi ve other Fabco-ir cylinder families. Duralon is a composite of a Tefl on /Dacron fabric liner bonded to a supporting fi lament-wound, high strength, fi berglass and epoxy resin shell. esistant to corrosion, moisture and temperature to 3, Duralon is reliable in any environment. It has an extremely high load bearing capacity, very low friction, and will not gall or score the piston rod (See physical properties in the above table). Page 9--0

3 Performance and the idest Selection of odels & Options PODUCT INDEX lobal Series How to order... 9 Standard Stroke & Options vailability..., Effective Piston reas, eights... 8 Construction and Parts ists... 6, 7 Double cting Dimensions Single od..., 11 Double od..., 13 Double od, Hole Thru..., Nonrotating Piston od Single cting Dimensions Spring etract/spring Extend... 18, 19 Spring forces... 8 Cylinder Options & ccessories djustable Stroke Extend... 8, 9 djustable Stroke etract... 3 ack to ack Cylinders... 3, 3 Tandem Cylinders... 3, 3 High Temperature Seals... 3 agnetic Piston Position Sensors Female Cordsets for uick Disconnects ounting Options Foot ount oss ount, Front & ear Flange ounts, Front & ear... 3 ear Clevis ount od Clevis od Eye Seal its... 3 lobal Series with agnetic Piston Position Sensing Double cting Dimensions Single od..., 1 Double od..., 3 Double od, Hole Thru..., 6 Nonrotating Piston od NE lobal Series uided Toolplate Features How to Order Specifi cations & Dimensions Supported by engineering and inventory Cylinder components are on the shelf. CD libraries of drawings for each model and option are available on disk and at our web site ready for downloading. e're ready to work with you. Phone: (3) ; eb site E-ail: fabco@fabco-air.com. Plenty to Choose From bore sizes through ( 1 / " "). Strokes through 1 (." 6"). 3 Choices of ports NPT, SP Parallel, SP Tapered. Choice of rod ends female with wrench fl ats or male rod with wrench fl ats and jam nut etric or Inch rod thread and mounting. ctuation double acting, single rod; double acting, double rod; non-rotating double acting, single rod or double rod; single acting, single rod spring retract or spring extend. agnetic piston models for position sensors including electronic sensors and reed switches. mounting accessories including fl ange mounts (rod or cap end with ISO or Non-ISO pattern), rear clevis mount (rear clevis, rod clevis, rod eye), boss mount (rod or cap), and foot mounts. Unique, adjustable stroke models. 3-position and -position models. umpers and choice of seal materials... all backed by a 3 month, 11 million cycle warranty! Page 3

4 lobal Series Cylinders ctuation Standard ounting Standard Strokes Note: Use internal stroke collar to obtain intermediate stroke from longer stroke cylinders. Stroke tolerances thru / 0 Stroke () Thru Hole Thru Hole Thru Hole Thru Hole Thru Hole Size () Size () Size () Size () Size () Page 9--0

5 Standard Strokes, Features & Options vailability Features and Options Standard Series agnetic Piston Series Tapped Hole Flange ounts ounting Options Foot ount ear Clevis ount Front oss ount ear oss ount ale od End Cylinder Options djustable Stroke High Temp Seals umpers Double cting Single od Double cting Double od Double cting, Single od Non-otating Double cting, Double od Non-otating Single cting Spring etract Single cting Spring Extend 9--0 Page

6 lobal Series Cylinders Construction Standard Cylinder odels Single cting/spring Extend Single cting/spring etract Extended Strokes Single od/nonrotating Single od/double cting ale od Thread Optional Double od/double cting Single od/oss ount Single od/umpers Front & ear asic Construction No uick eference to Components Description Cylinder body Piston Piston rod ushing cap ock ring od bearing End cap Spring Piston seal od seal asket umper od end nut nnular magnet od seal earing strip aterial Hard nodized luminum luminum alloy Stainless steel luminum alloy Carbon steel Duralon luminum alloy usic wire Internal lube O-ring Internal lube O-ring una N ubber Carbon steel ubber bonded una N TFE compound Note Extruded with dovetails Hard chrome plated lack anodized Zinc chromate See note 1 below lack anodized Viton optional Viton optional Viton optional Plated See notes & 3 below olded shape U cup See page 7 Note 1: earing material for, & bores is hard anodized aluminum Note : agnetic material, & bores: rare earth neodymium Note 3: agnetic material bore and up: barium ferrite Cylinder ody aterial is a custom aluminum extrusion with integral dovetail slots to provide mounting for piston position sensors. Its heavy wall prohibits damage to the bore from external infl uences. The is Polished to produce a fi ne crosshatch fi nish. This fi nish, unlike an ultra-smooth fi nish, provides minute oil rings in which the lubrication can lie and support the seal as it moves along the surface. This surface finish and lubrication lowers friction and prolongs seal life. The Cylinder is Hard nodized inside and out. Hard anodizing is an electrochemical process which provides a very dense surface of aluminum oxide that actually impregnates the base aluminum. It forms an extremely hard (60 c) surface with a low coefficient of friction. Hardness, corrosion resistance and wear resistance exceeds that of chrome plated steel. n Extra ong od earing provides long and rigid support for the piston rod. The bearing material is Hard nodized luminum on the small, & bores, and Duralon on all larger bore sizes. See the chart comparing physical properties on page. The bushing cap and end cap are held in place by a lockring. The Piston od is Hard Chrome Plated Stainless Steel. The standard rod end is fi ne thread tapped and has long wrench fl ats. Piston Construction The piston is aluminum for light weight. counterbore locates the piston rod with precise concentricity for smooth cylinder performance. For single rod cylinders the piston is attached to the piston rod with a socket fl at head screw which is torqued for both proper preload on the screw and secure clamping Page

7 ir Cylinders with 3 Years anufacturing Experience uilt-in of the piston. octite on the threads and faces assures sealing and locks the assembly against pounding and vibration. For double rod cylinders the piston rods are connected by a high strength stud, sandwiching the piston between the rod end faces. Counterbores locate the rods for alignment and precise concentricity. The assembly is torqued and octited. Standard & ong Stroke Cylinder Pistons are thin with a single O-ring for space savings. Extended Stroke Cylinder Pistons are thicker and incorporate a bearing in addition to the O-ring seal. The bearing is a close tolerance, rectangular cross section strip of a tough, stable, wear-resistant TFE compound located at the rear of the piston head, the furthest point from the rod bearing. The bearing material and its location provide maximum load support and maintain the long life of the cylinder bore and piston seal. Standard Seals are Internally ubricated, odified una N O-rings enefi ts include low profi le cylinder construction, low friction, and long life sealing over an operating temperature range of 3 C to +1 C ( F to +0 F). dditionally, all units are factory lubricated with agnalube, a grease loaded with microscopic size particles of TFE in suspension. This combination has been found suitable for long life in most non-lube service applications. Viton seals are optional for high temperature resistance ( C and 0 F) and resistance to many hostile fl uids. agnetic Piston Cylinders agnetic Piston Position Sensing enables mid-stroke signaling and exact end-of-stroke sensing. hen the magnetic piston moves under a sensor the magnetic field activates the sensor without physical contact. sensor can be positioned anywhere in one of the dovetail slots and locked in position by an integral screw. ultiple sensors can be installed in one or more of the dovetails. The sensor(s) provides precise piston position indication for controllers, computers, relays, valves, or other devices. (See page 37 for sensor models) For bore cylinders and up, a polarized permanent magnet of rubber bonded barium ferrite is used. It is very stable and unaffected by vibration and shock. Under normal usage it will remain magnetized indefi nitely. For, and bores (which have higher ratios of cylinder wall thickness to piston diameter)a rare earth neodymium magnetic material is used to assure consistently reliable sensor performance. External magnetic fields and/or magnetic conductive materials may affect the strength of the piston magnets, therefore affecting sensor actuation and piston position indication agnetic Piston odels Extended Strokes hen a sensor is mounted to indicate a mid-stroke position, the moving piston causes the sensor to provide a momentary signal. If signal duration is less than, or marginally close to what is required for the driven device a user-supplied latching circuit (or similar) may be needed. Single od/nonrotating Duralon is a registered trademark of exnord Corp. octite is a registered trademark of octite Corp. agnalube is a registered trademark of Carlton Stuart Corp. Teflon and Viton are registered trademarks of DuPont Corp Single od/double cting ale od Thread Optional Double od/double cting Single od/double cting umpers Front and ear Single od/double cting ear oss ount 7 Page 7

8 lobal Series Cylinders Specifi cations 3 Effective Piston reas Push Pull cm in cm Connectors for the NE agnetic Position Sensors See page 36 in Spring etract Forces Pre-load End of Stroke kg lbs kg Spring Extend Forces lbs Pre-load End of Stroke kg lbs kg lbs Conversions ultiply by Newton g (force) lb (force) Newton lb (force) g (force) psi bar Force (lb) = P (psi) x (in ) Force (Newton) = P (bar) x (cm ) x 3 (0.088) 61 (0.13) 91 (0.1) 118 (0.60) 17 (0.36) 7 (0.600) Estimated Cylinder eights - Double cting, Single od odels Note: eights in rams (Pounds) 7 (.) 7 (.19) 1 (.7) 139 (.306) 1 (.397) 9 (.68) 1 (.88) 67 (1.3) 13 (3.18) 8 (.87) 30 7 (.) 1 (.6) 193 (.6) (.9) 70 (.9) 38 (.8) 1 (1.1) 7 (1.78) 1 (3.98) (.) 9 (.) 0 (.33) (.9) 87 (.1) 339 (.76) 8 (.986) 6 (1.6) 97 (.0) 76 (.7) 9 (6.9) Strokes in millimeters 7 1 (.309) (.) 311 (.68) 8 (.899) (1.1) (1.37) 98 (.11) 17 (.77) 830 (6.) 31 (8.38) 17 (.378) 8 (.6) 37 (.86) 8 (1.067) 6 (1.) 733 (1.6) 1 (.3) 16 (3.3) 396 (7.7) 318 (9.) 1 8 (1.81) 77 (.37) 188 (.07) 3 (.9) 39 (7.70) 36 (11.) (.06) 11 (.67) 66 (.) 99 (.1) 3870 (8.) 31 (.18) dditional weight for male thread (.00) 3 (.007) 7 (.01) 17 (.0) (.09) (.09) (.18) (.18) 0 (.3) 70 (.60) dditional weight for magnetic piston (.03) 17 (.0) (.0) 9 (.06) 39 (.09) (.) (.18) (.) 13 (.31) 8 (.6) Page 8 --0

9 How to Order odel Number lobal Series Series Port ody N without magnetic piston D with magnetic piston D double acting S single acting, spring retract - 0 thru 0 bore only T single acting, spring extend - 0 thru 0 bore only odel ounting Stroke ction Options N NPT ports, inch rod thread SP Parallel ports, metric rod thread P SPT taper ports, metric rod thread Note 1: See page 8 for specifi c '' information and ordering examples S single rod double rod T double rod hole thru non-rotating single rod non-rotating double rod non-rotating double rod hole thru adjustable stroke extend adjustable stroke extend nonrotating rod (Note 1) thru hole foot mount E fl ange rod end F fl ange cap end ISO fl ange rod end H ISO fl ange cap end C rear clevis tapped both ends (Note ) Note 3 bumpers, both ends male rod, rod end N male rod, cap end P male rod, both ends E boss, rod end F boss, cap end S adjustable stroke, retract vailable only for S & models V high temperature seals XC back-to-back XC11 tandem (mtg at rod end) XC tandem (mtg at cap end) Note : On bores, tapped holes will be inch threads for port code 'N' and metric threads for port codes '' & 'P'. Tapped holes will be metric when ordering any foot, fl ange, or clevis mounting. Ordering Example 1 lobal Series, NPT Ports, without agnetic Piston, Single od, ISO Flange on od End,, 60 Stroke, Double cting, and ale od. Note:The standard stroke chart on page shows available strokes of and stroke is obtained using an internal stroke collar with the longer 7 stroke cylinder. (See extended stroke chart on page for and dimensions which apply to the 7 cylinder body). The odel Number is: NN S0 060D Ordering Example lobal Series, NPT Ports, with agnetic Piston, Single od, Through Hole Standard ount,, 7 Stroke, Double cting, ale od, and High Temperature Seals. Note: The standard stroke chart on page shows 7 stroke is available. No stroke collar is required. The odel Number is: ND S0 07D V Note: Sensors must be ordered separately. See page Page 9

10 lobal Series Cylinders Ø - Ø s E E H THEDS + STOE + STOE FTS ØN THU () ØO C'OE () P PCES Dimensional Data Note 1- See page for complete stroke availability Note - Chart dimensions are shown as (inches) 3 Stroke 7, 7, 7, 7, 7, 7,.0 (1.7) 6. (1.83) 8. (1.91).0 (.13). (.) 7.0 (.9) ong Stroke 33.0 (1.30) 39. (1.6). (1.9) 6.0 (1.81) 3. (.11).0 (.8) 8.7 (.3) 9. (.36). (.1) 11. (.) 1.0 (.) 18.0 (.71) Stroke, 7,, 7, 7, 7, 1, 1 1, 1 1, 1 1, 1 1, 1 1, 1 Extended Stroke 37.3 (1.7) 33.8 (1.33) 39.7 (1.6) 36. (1.) 6.1 (1.8) 1.6 (1.6). (.07) 7. (1.87).8 (.) 7.8 (1.88) 6. (.6). (.19) 67.3 (.6) 9.3 (.33) 7.6 (.86) 6.6 (.) 79. (3.13) 69. (.7) 88.7 (3.9) 76.7 (3.0) 8.9 (.3). (.).1 (.8).7 (.).7 (.).7 (.) 13. (.) 18. (.73) 1.0 (.) 18.0 (.71) (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () Stroke ange ~30 (0.~1.18) ~30 (0.~1.18) ~ (0.~.0) ~ (0.~.0) only (0.) ~ (0.39~.0) ~ (0.~.0) ~ (0.39~.0) ~ (0.39~.0) ~ (0.39~.0) ~ (0.39~.0). (0.81).0 (0.87).0 (0.9) 7. (1.08) 30.0 (1.18) 30.0 (1.18) 36. (1.) 38. (1.).0 (1.73) 3. (.11) 6.0 (.6) 17.0 (0.67) 18. (0.73) 19. (0.77). (0.89) 3.0 (0.91) 3.0 (0.91) 9. (1.) 30. (1.) 36.0 (1.) 3. (1.71) 3.0 (.09) 6 (0.36) 8 (0.31) (0.39) (0.7) (0.0) (0.0) (0.0) (0.787) (0.787) (0.98) 30 (1.181) (0.98) 9 (1.1) 36 (1.) (1.7). (1.7). (1.7) (.0).7 (.1) 76.7 (3.0) 97.8 (3.8) 11.3 (.) E 3 (0.90) 7. (1.07) 31. (1.3) 36.9 (1.) H (Threads) x dp minimum #8-3 x.1dp 3 x 0. dp #8-3 x.1dp x 0.7 dp #-3 x.8 dp x dp 1/-8 x.39 dp 6 x 1.0 dp /- x. dp 8 x 1. dp /- x. dp 8 x 1. dp 3/8- x. dp 8 x 1. dp 1/- x. dp x 1. dp 1/- x. dp x 1. dp /8-18 x.88 dp x.0 dp 3/- x.88 dp x. dp 31. (1.) 37.1 (1.6) 7 (1.8) 1.3 (.0) 8.9 (.3) 8.9 (.3) 69 (.7) 8.9 (3.3) 1.8 (.01) 9.8 (.11) 13.9 (6.06) Page -0-06

11 Double cting, Single od odels Ø3 - Ø s H THEDS ØN THU HOE () ØO C'OE (8 ) FTS od end male thread J NUT INCUDED F Z H THEDS + STOE + STOE P PCES Note: Inch threads for 'N' port code. etric threads for '' & 'P' port codes. etric for foot, flange, or clevis mount. Tapped hole mounting O THED OTH ENDS * Port Size Offerings See dim. column P below N NPT ports, inch rod thread SP parallel ports, metric rod thread P SPT taper ports, metric rod thread Note: x 0.8 port will accept #-3 male thread fi ttings. 3 F (HEX) inch or.3 or 8.3 or.38 or 13.3 or 17. or.6 or.7 or 7.7 or 7.93 or or 6 H (THEDS) #8-3 x.31 lg or x lg #8-3 x.31 lg or 6 x lg #-3 x.31 lg or 8 x 1. - lg 1/-8 x.37 lg or x lg /- x. lg or 1 x lg 3/8- x. lg or 1 x lg 1/- x.77 lg or 18 x lg 1/- x.77 lg or 18 x lg /8-18 x 1.00 lg or x lg 3/- x 1. lg or 6 x lg inch or 0. or or or or or or or or or or 3. 3 O (THEDS) #8-3 or x 0.7 #8-3 or x 0.7 1/- or 6 x 1.0 1/- or 6 x 1.0 1/- or 6 x 1.0 1/- or 6 x 1.0 /-18 or 8 x 1. 7/-1 or x 1. 1/-13 or x 1.7 1/-13 or x 1.7 inch or 0.3 or or or 1.13 or or 9 (0.) 6 (0.) (0.39) 1 (0.) 1 (0.) 1 (0.) 17 (0.67) 17 (0.67) (0.87) 7 (1.06) 3. (0.1) 3. (0.1). (0.18) (0.) 7 (0.8) 7 (0.8) 7 (0.8) (0.39) (0.7) (0.87) 8 (1.) 36 (1.) (1.7) 3 (1.3) 3 (1.3) (1.7) (1.97) 60 (.36) 77 (3.03) 9 (3.70) ØN 3. (0.1) 3. (0.1). (0.). (0.). (0.). (0.). (0.) 6.6 (0.6) 9 (0.3) 11 (0.3) 11 (0.3) ØO 6. x 3. dp (0.6 x 0.1 dp) 6. x 3. dp (0.6 x 0.1 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 11.0 x 8.0 dp (0.3 x 0.31 dp) 13.7 x. dp (0. x 0.1 dp).8 x 13. dp (0.66 x 0.3 dp).8 x 13. dp (0.66 x 0.3 dp) *P x0.8 x0.8 x0.8 x0.8 x0.8 1/8* 1/8* 1/* 1/* 3/8* 3/8* 7.0 (0.8) (0.3) 8. (0.33) 8.7 (0.3) 8.7 (0.3) 9. (0.36). (0.1) 11. (0.) 1.0 (0.) 18.0 (0.71) 9.3 (1.9) 9.3 (1.9) 7.0 (.) 70.6 (.78) 83.6 (3.9) (.09) 1.9 (.) Z. (0.6). (0.6) 17.8 (0.70). (0.88). (0.88) 7.0 (1.06) 7.0 (1.06) (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () --06 Page 11

12 lobal Series Cylinders Ø - Ø s E E H THEDS OTH ENDS + ( X STOE) + STOE + STOE FTS ØN THU () ØO C'OE () P PCES Dimensional Data Note 1- See page for complete stroke availability Note - Chart dimensions are shown as (inches) 3 Stroke 7, 7, 7, 7, 7, 7, 61.8 (.3) 69. (.7) 7.3 (.96).6 (3.17) 89. (3.).7 (3.96) ong Stroke 7.8 (1.88). (.19) 9.3 (.33) 6.6 (.) 69. (.7) 76.7 (3.0).7 (.).7 (.) 13. (.) 18. (.73) 1.0 (.) 18.0 (.71) Stroke, 7,, 7, 7, 7, 1, 1 1, 1 1, 1 1, 1 1, 1 1, 1 Extended Stroke.8 (1.61) 3. (1.70).6 (1.99) 7. (.6) 61.8 (.3) 69. (.7) 7.3 (.96).6 (3.17) 89. (3.).7 (3.96) 33.8 (1.33) 36. (1.) 1.6 (1.6) 7. (1.87) 7.8 (1.88). (.19) 9.3 (.33) 6.6 (.) 69. (.7) 76.7 (3.0) 8.9 (.3). (.).1 (.8).7 (.).7 (.).7 (.) 13. (.) 18. (.73) 1.0 (.) 18.0 (.71) odel Code 'T' Hole Size N (N) 1. (.06) 1. (.06) 3.1 (.13) (.13) 3.1 (.13).0 (.).0 (.) 6.3 (.) 6.3 (.) (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () Page Stroke ange ~30 (0.~1.18) ~30 (0.~1.18) ~ (0.~.0) ~ (0.~.0) only (0.) ~ (0.39~.0) ~ (0.~.0) ~ (0.39~.0) ~ (0.39~.0) ~ (0.39~.0) ~ (0.39~.0) 3. (1.7) 33.0 (1.30) 3.0 (1.38) 39.0 (1.). (1.7). (1.7).0 (.13) 6. (.) 8.0 (.8) 71.0 (.) 8. (3.33). (0.99) 6.0 (1.0) 6.0 (1.0) 9.0 (1.1) 30. (1.) 30. (1.).0 (1.7). (1.9).0 (1.6) 1.0 (.01) 60. (.38) 6 (0.36) 8 (0.31) (0.39) (0.7) (0.0) (0.0) (0.0) (0.787) (0.787) (0.98) 30 (1.181) (0.98) 9 (1.1) 36 (1.) (1.7). (1.7). (1.7) (.0).7 (.1) 76.7 (3.0) 97.8 (3.8) 11.3 (.) E 3 (0.90) 7. (1.07) 31. (1.3) 36.9 (1.) H (Threads) x dp minimum #8-3 x.1dp 3 x 0. dp #8-3 x.1dp x 0.7 dp #-3 x.8 dp x dp 1/-8 x.39 dp 6 x 1.0 dp /- x. dp 8 x 1. dp /- x. dp 8 x 1. dp 3/8- x. dp 8 x 1. dp 1/- x. dp x 1. dp 1/- x. dp x 1. dp /8-18 x.88 dp x.0 dp 3/- x.88 dp x. dp 31. (1.) 37.1 (1.6) 7 (1.8) 1.3 (.0) 8.9 (.3) 8.9 (.3) 69 (.7) 8.9 (3.3) 1.8 (.01) 9.8 (.11) 13.9 (6.06) --06

13 Double cting, Double od odels Ø3 - Ø s H THEDS OTH ENDS ØN THU HOE () ØO C'OE (8 ) P PCES * Port Size Offerings See dim. column P below N NPT ports, inch rod thread SP parallel ports, metric rod thread P SPT taper ports, metric rod thread Note: x 0.8 port will accept #-3 male thread fi ttings. FTS od end male thread J NUT INCUDED F Z H THEDS + STOE + STOE + STOE + ( X STOE) Note: Inch threads for 'N' port code. etric threads for '' & 'P' port codes. etric for foot, flange, or clevis mount. Tapped hole mounting O THED OTH ENDS 3 F (HEX) inch or.3 or 8.3 or.38 or 13.3 or 17. or.6 or.7 or 7.7 or 7.93 or or 6 H (THEDS) #8-3 x.31 lg or x lg #8-3 x.31 lg or 6 x lg #-3 x.31 lg or 8 x 1. - lg 1/-8 x.37 lg or x lg /- x. lg or 1 x lg 3/8- x. lg or 1 x lg 1/- x.77 lg or 18 x lg 1/- x.77 lg or 18 x lg /8-18 x 1.00 lg or x lg 3/- x 1. lg or 6 x lg inch or 0. or or or or or or or or or or 3. 3 O (THEDS) #8-3 or x 0.7 #8-3 or x 0.7 1/- or 6 x 1.0 1/- or 6 x 1.0 1/- or 6 x 1.0 1/- or 6 x 1.0 /-18 or 8 x 1. 7/-1 or x 1. 1/-13 or x 1.7 1/-13 or x 1.7 inch or 0.3 or or or 1.13 or or 9 (0.) 6 (0.) (0.39) 1 (0.) 1 (0.) 1 (0.) 17 (0.67) 17 (0.67) (0.87) 7 (1.06) 3. (0.1) 3. (0.1). (0.18) (0.) 7 (0.8) 7 (0.8) 7 (0.8) (0.39) (0.7) (0.87) 8 (1.) 36 (1.) (1.7) 3 (1.3) 3 (1.3) (1.7) (1.97) 60 (.36) 77 (3.03) 9 (3.70) ØN 3. (0.1) 3. (0.1). (0.). (0.). (0.). (0.). (0.) 6.6 (0.6) 9 (0.3) 11 (0.3) 11 (0.3) ØO 6. x 3. dp (0.6 x 0.1 dp) 6. x 3. dp (0.6 x 0.1 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 11.0 x 8.0 dp (0.3 x 0.31 dp) 13.7 x. dp (0. x 0.1 dp).8 x 13. dp (0.66 x 0.3 dp).8 x 13. dp (0.66 x 0.3 dp) *P x0.8 x0.8 x0.8 x0.8 x0.8 1/8* 1/8* 1/* 1/* 3/8* 3/8* 7.0 (0.8) (0.3) 8. (0.33) 8.7 (0.3) 8.7 (0.3) 9. (0.36). (0.1) 11. (0.) 1.0 (0.) 18.0 (0.71) 9.3 (1.9) 9.3 (1.9) 7.0 (.) 70.6 (.78) 83.6 (3.9) (.09) 1.9 (.) Z. (0.6). (0.6) 17.8 (0.70). (0.88). (0.88) 7.0 (1.06) 7.0 (1.06) (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () Page 13

14 lobal Series Cylinders Ø - Ø s E ØN THU () ØO C'OE () + STOE + STOE H TP ØT arning THIS CYINDE HS NON-OTTIN OD. TO PEVENT INTEN DE HOD OD Y FTS ONY HEN FUY ETCTED HIE INSTIN O EOVIN TTCHENTS. DO NOT SCTCH O DENT SHFT. Dimensional Data Note 1- See page for complete stroke availability Note - Chart dimensions are shown as (inches) od fl ats (Dim. ) nominally in-line with ports P PCES (.) (.) 8 (.3) 8 (.3) size 3 Nonrotating rod accuracy ± ±1 ±1 ±1 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 3 Stroke 7, 7, 7, 7, 7, 7, 9.0 (1.93) 6. (1.83) 8. (1.91).0 (.13). (.) 7.0 (.9) ong Stroke.0 (1.6) 39. (1.6). (1.9) 6.0 (1.81) 3. (.11).0 (.8) 8.7 (.3) 9. (.36). (.1) 11. (.) 1.0 (.) 18.0 (.71) Stroke, 7,, 7, 7, 7, 1, 1 1, 1 1, 1 1, 1 1, 1 1, 1 Extended Stroke.3 (1.67) 38.8 (1.3).7 (1.76) 1. (1.6).1 (.13) 9.6 (1.9) 60. (.38). (.19).8 (.1) 6.8 (.) 6. (.6). (.19) 67.3 (.6) 9.3 (.33) 7.6 (.86) 6.6 (.) 79. (3.13) 69. (.7) 88.7 (3.9) 76.7 (3.0) 8.9 (.3). (.).1 (.8).7 (.).7 (.).7 (.) 13. (.) 18. (.73) 1.0 (.) 18.0 (.71) * Port Size Offerings See dim. column P below N NPT ports, inch rod thread SP parallel ports, metric rod thread P SPT taper ports, metric rod thread Note: x 0.8 port will accept #-3 male thread fi ttings. (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () Stroke ange ~30 (0.~1.18) ~30 (0.~1.18) ~ (0.~.0) ~ (0.~.0) only (0.) ~ (0.39~.0) ~ (0.~.0) ~ (0.39~.0) ~ (0.39~.0) ~ (0.39~.0) ~ (0.39~.0). (1.00) 7.0 (1.06) 3.0 (1.6) 3. (1.) 39.0 (1.) 39.0 (1.) 36. (1.) 38. (1.).0 (1.73) 3. (.11) 6.0 (.6).0 (0.87) 3. (0.93) 7. (1.08) 30. (1.) 3.0 (1.6) 3.0 (1.6) 9. (1.) 30. (1.) 36.0 (1.) 3. (1.71) 3.0 (.09) 6 (0.36) 8 (0.31) (0.39) (0.7) (0.0) (0.0) (0.0) (0.787) (0.787) (0.98) 30 (1.181) (0.98) 9 (1.1) 36 (1.) (1.7). (1.7). (1.7) (.0).7 (.1) 76.7 (3.0) 97.8 (3.8) 11.3 (.) E 3 (0.90) 7. (1.07) 31. (1.3) 36.9 (1.) H (Threads) x dp minimum #8-3 x.1dp 3 x 0. dp #8-3 x.1dp x 0.7 dp #-3 x.8 dp x dp 1/-8 x.39 dp 6 x 1.0 dp /- x. dp 8 x 1. dp /- x. dp 8 x 1. dp 3/8- x. dp 8 x 1. dp 1/- x. dp x 1. dp 1/- x. dp x 1. dp /8-18 x.88 dp x.0 dp 3/- x.88 dp x. dp 31. (1.) 37.1 (1.6) 7 (1.8) 1.3 (.0) 8.9 (.3) 8.9 (.3) 69 (.7) 8.9 (3.3) 1.8 (.01) 9.8 (.11) 13.9 (6.06) Page

15 Double cting, Nonrotating Piston od odels Ø3 H TP ØN THU HOE () ØO C'OE () P PCES Z ØT (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () Slots () for ound Profile Sensors ØT 1 +0/ 0.03 ( /0.00) +0/ 0.0 ( /0.00) 13 +0/ 0.03 (0. +0/0.00) 1 +0/ 0.03 ( /0.00) 1 +0/ 0.06 ( /0.00) 8 +0/ 0.06 (1. +0/0.00) 3 +0/ 0.06 ( /0.00) 3 +0/ 0.06 ( /0.00) 3 +0/ 0.06 ( /0.00) 9 +0/ 0.07 (.33 +0/ (.3) + STOE + STOE 1. (0.09) 1. (0.09).0 (0.079).0 (0.079).0 (0.079).0 (0.079).0 (0.079).0 (0.079).0 (0.079).0 (0.079 Ø - Ø s H TP ØN THU HOE () ØO C'OE (8) Z ØT P PCES od fl ats (Dim. ) nominally in-line with ports + STOE + STOE od end male thread J NUT INCUDED F H THEDS Tapped hole mounting Note: Inch threads for 'N' port code. etric threads for '' & 'P' port codes. etric for foot, flange, or clevis mount. O THED OTH ENDS 3 H (THEDS) #8-3 x.31 lg or x lg #8-3 x.31 lg or 6 x lg #-3 x.31 lg or 8 x 1. - lg 1/-8 x.37 lg or x lg /- x. lg or 1 x lg 3/8- x. lg or 1 x lg 1/- x.77 lg or 18 x lg 1/- x.77 lg or 18 x lg /8-18 x 1.00 lg or x lg 3/- x 1. lg or 6 x lg inch or 0. or or or or or or or or or or 3. 3 O (THEDS) #8-3 or x 0.7 #8-3 or x 0.7 1/- or 6 x 1.0 1/- or 6 x 1.0 1/- or 6 x 1.0 1/- or 6 x 1.0 /-18 or 8 x 1. 7/-1 or x 1. 1/-13 or x 1.7 1/-13 or x 1.7 Places Front F inch or 0. or 0. or 0.98 or 0.98 or 1.0 or or 1.13 or or 9 Places ear inch or 0.3 or or or 1.13 or or 9. (0.) 6 (0.) (0.39) 1 (0.) 1 (0.) 1 (0.) 18 (0.71) 18 (0.71) (0.87) 7 (1.06) 3. (0.1) 3. (0.1). (0.18) (0.) 7 (0.8) 7 (0.8) 7 (0.8) (0.39) (0.7) (0.87) 8 (1.) 36 (1.) (1.7) 3 (1.3) 3 (1.3) (1.7) (1.97) 60 (.36) 77 (3.03) 9 (3.70) ØN 3. (0.1) 3. (0.1). (0.). (0.). (0.). (0.). (0.) 6.6 (0.6) 9 (0.3) 11 (0.3) 11 (0.3) ØO 6. x 3. dp (0.6 x 0.1 dp) 6. x 3. dp (0.6 x 0.1 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 11.0 x 8.0 dp (0.3 x 0.31 dp) 13.7 x. dp (0. x 0.1 dp).8 x 13. dp (0.66 x 0.3 dp).8 x 13. dp (0.66 x 0.3 dp) *P x0.8 x0.8 x0.8 x0.8 x0.8 1/8* 1/8* 1/* 1/* 3/8* 3/8* 7.0 (0.8) (0.3) 8. (0.33) 8.7 (0.3) 8.7 (0.3) 9. (0.36). (0.1) 11. (0.) 1.0 (0.) 18.0 (0.71) 9.3 (1.9) 9.3 (1.9) 7.0 (.) 70.6 (.78) 83.6 (3.9) (.09) 1.9 (.) Z. (0.6). (0.6) 17.8 (0.70). (0.88). (0.88) 7.0 (1.06) 7.0 (1.06) (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () Page 1

16 lobal Series Cylinders Ø - Ø s E ØN THU () ØO C'OE () + ( x STOE) + STOE + STOE ØT arning THIS CYINDE HS NON-OTTIN OD. TO PEVENT INTEN DE HOD OD Y FTS ONY HEN FUY ETCTED HIE INSTIN O EOVIN TTCHENTS. DO NOT SCTCH O DENT SHFT. Dimensional Data Note 1- See page for complete stroke availability Note - Chart dimensions are shown as (inches) od fl ats (Dim. ) nominally in-line with ports H TP OTH ENDS (.) (.) 8 (.3) 8 (.3) P PCES size 3 Nonrotating rod accuracy ± ±1 ±1 ±1 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 3 Stroke 7, 7, 7, 7, 7, 7, ong Stroke 70.8 (.79) 69. (.7) 7.3 (.96).6 (3.17) 89. (3.).7 (3.96) 6.8 (.). (.19) 9.3 (.33) 6.6 (.) 69. (.7) 76.7 (3.0).7 (.).7 (.) 13. (.) 18. (.73) 1.0 (.) 18.0 (.71) Stroke, 7,, 7, 7, 7, 1, 1 1, 1 1, 1 1, 1 1, 1 1, 1 Extended Stroke 38.8 (1.3) 1. (1.6) 9.6 (1.9). (.19) 6.8 (.). (.19) 9.3 (.33) 6.6 (.) 69. (.7) 76.7 (3.0).8 (1.) 8. (1.90) 8.6 (.31) 6. (.8) 70.8 (.79) 69. (.7) 7.3 (.96).6 (3.17) 89. (3.).7 (3.96) 8.9 (.3). (.).1 (.8).7 (.).7 (.).7 (.) 13. (.) 18. (.73) 1.0 (.) 18.0 (.71) odel Code '' Hole Size N (N) 1. (.06) 1. (.06) 3.1 (.13) (.13) 3.1 (.13).0 (.).0 (.) 6.3 (.) 6.3 (.) (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () Stroke ange ~30 (0.~1.18) ~30 (0.~1.18) ~ (0.~.0) ~ (0.~.0) only (0.) ~ (0.39~.0) ~ (0.~.0) ~ (0.39~.0) ~ (0.39~.0) ~ (0.39~.0) ~ (0.39~.0) 37. (1.6) 38.0 (1.) 3.0 (1.69) 7.0 (1.8) 3. (.11) 3. (.11).0 (.13) 6. (.) 8.0 (.8) 71.0 (.) 8. (3.33) 30. (1.19) 31.0 (1.) 3.0 (1.3) 37.0 (1.6) 39. (1.6) 39. (1.6).0 (1.7). (1.9).0 (1.6) 1.0 (.01) 60. (.38) 6 (0.36) 8 (0.31) (0.39) (0.7) (0.0) (0.0) (0.0) (0.787) (0.787) (0.98) 30 (1.181) (0.98) 9 (1.1) 36 (1.) (1.7). (1.7). (1.7) (.0).7 (.1) 76.7 (3.0) 97.8 (3.8) 11.3 (.) E 3 (0.90) 7. (1.07) 31. (1.3) 36.9 (1.) H (Threads) x dp minimum #8-3 x.1dp 3 x 0. dp #8-3 x.1dp x 0.7 dp #-3 x.8 dp x dp 1/-8 x.39 dp 6 x 1.0 dp /- x. dp 8 x 1. dp /- x. dp 8 x 1. dp 3/8- x. dp 8 x 1. dp 1/- x. dp x 1. dp 1/- x. dp x 1. dp /8-18 x.88 dp x.0 dp 3/- x.88 dp x. dp 31. (1.) 37.1 (1.6) 7 (1.8) 1.3 (.0) 8.9 (.3) 8.9 (.3) 69 (.7) 8.9 (3.3) 1.8 (.01) 9.8 (.11) 13.9 (6.06) Page --06

17 Double cting, Double od, Nonrotating Piston od odels Ø3 H TP OTH ENDS H TP OTH ENDS ØN THU HOE () ØO C'OE () Z ØT Ø - Ø s ØN THU HOE () ØO C'OE (8) Z ØT P PCES P PCES 9 (.3) + STOE + STOE + ( x STOE) + STOE + ( x STOE) + STOE (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () ØT 1 +0/ 0.03 ( /0.00) +0/ 0.0 ( /0.00) 13 +0/ 0.03 (0. +0/0.00) 1 +0/ 0.03 ( /0.00) 1 +0/ 0.06 ( /0.00) 8 +0/ 0.06 (1. +0/0.00) 3 +0/ 0.06 ( /0.00) 3 +0/ 0.06 ( /0.00) 3 +0/ 0.06 ( /0.00) 9 +0/ 0.07 (.33 +0/0.003) od fl ats (Dim. ) nominally in-line with ports 1. (0.09) 1. (0.09).0 (0.079).0 (0.079).0 (0.079).0 (0.079).0 (0.079).0 (0.079).0 (0.079).0 (0.079) * Port Size Offerings See dim. column P below N NPT ports, inch rod thread SP parallel ports, metric rod thread P SPT taper ports, metric rod thread Note: x 0.8 port will accept #-3 male thread fi ttings. od end male thread 3 F (HEX) inch or.3 or 8.3 or.38 or 13.3 or 17. or.6 or.7 or 7.7 or 7.93 or or 6 J NUT INCUDED F H THEDS H (THEDS) #8-3 x.31 lg or x lg #8-3 x.31 lg or 6 x lg #-3 x.31 lg or 8 x 1. - lg 1/-8 x.37 lg or x lg /- x. lg or 1 x lg 3/8- x. lg or 1 x lg 1/- x.77 lg or 18 x lg 1/- x.77 lg or 18 x lg /8-18 x 1.00 lg or x lg 3/- x 1. lg or 6 x lg + STOE inch or 0. or or or or or or or or or or 3. Tapped hole mounting Note: Inch threads for 'N' port code. etric threads for '' & 'P' port codes. etric for foot, flange, or clevis mount. 3 O (THEDS) #8-3 or x 0.7 #8-3 or x 0.7 1/- or 6 x 1.0 1/- or 6 x 1.0 1/- or 6 x 1.0 1/- or 6 x 1.0 /-18 or 8 x 1. 7/-1 or x 1. 1/-13 or x 1.7 1/-13 or x 1.7 Places Front F inch or 0. or 0. or 0.98 or 0.98 or 1.0 or or 1.13 or or 9 Places ear O THED OTH ENDS inch or 0.3 or or or 1.13 or or 9. (0.) 6 (0.) (0.39) 1 (0.) 1 (0.) 1 (0.) 18 (0.71) 18 (0.71) (0.87) 7 (1.06) 3. (0.1) 3. (0.1). (0.18) (0.) 7 (0.8) 7 (0.8) 7 (0.8) (0.39) (0.7) (0.87) 8 (1.) 36 (1.) (1.7) 3 (1.3) 3 (1.3) (1.7) (1.97) 60 (.36) 77 (3.03) 9 (3.70) ØN 3. (0.1) 3. (0.1). (0.). (0.). (0.). (0.). (0.) 6.6 (0.6) 9 (0.3) 11 (0.3) 11 (0.3) ØO 6. x 3. dp (0.6 x 0.1 dp) 6. x 3. dp (0.6 x 0.1 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 11.0 x 8.0 dp (0.3 x 0.31 dp) 13.7 x. dp (0. x 0.1 dp).8 x 13. dp (0.66 x 0.3 dp).8 x 13. dp (0.66 x 0.3 dp) *P x0.8 x0.8 x0.8 x0.8 x0.8 1/8* 1/8* 1/* 1/* 3/8* 3/8* 7.0 (0.8) (0.3) 8. (0.33) 8.7 (0.3) 8.7 (0.3) 9. (0.36). (0.1) 11. (0.) 1.0 (0.) 18.0 (0.71) 9.3 (1.9) 9.3 (1.9) 7.0 (.) 70.6 (.78) 83.6 (3.9) (.09) 1.9 (.) Z. (0.6). (0.6) 17.8 (0.70). (0.88). (0.88) 7.0 (1.06) 7.0 (1.06) (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () Page 17

18 lobal Series Cylinders Ø - Ø s Spring etract Spring Extend E E H THEDS + STOE + STOE + ( x STOE) + + STOE STOE FTS ØN THU () ØO C'OE () P PCES H THEDS P PCES Note 1- See page for complete stroke availability Dimensional Data Note - Chart dimensions are shown as (inches) * Port Size Offerings See dim. column P below N NPT ports, inch rod thread SP parallel ports, metric rod thread P SPT taper ports, metric rod thread Note: x 0.8 port will accept #-3 male thread fi ttings. (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () Stroke ange ~ (0.~0.39) ~ (0.~0.39) ~ (0.~0.39) ~ (0.~0.39) (0.) (0.39) ~ (0.~0.39) ~ (0.39~0.79). (0.81).0 (0.87).0 (0.9) 7. (1.08) 30.0 (1.18) 30.0 (1.18) 36. (1.) 38. (1.) 17.0 (0.67) 18. (0.73) 19. (0.77). (0.86) 3.0 (0.91) 3.0 (0.91) 9. (1.) 30. (1.) 6 (0.36) 8 (0.31) (0.39) (0.7) (0.0) (0.0) (0.0) (0.787) (0.98) 9 (1.1) 36 (1.) (1.7). (1.7). (1.7) (.0).7 (.1) E 3 (0.90) 7. (1.07) 31. (1.3) 36.9 (1.) H (Threads) x dp minimum #8-3 x.1dp 3 x 0. dp #8-3 x.1dp x 0.7 dp #-3 x.8 dp x dp 1/-8 x.39 dp 6 x 1.0 dp /- x. dp 8 x 1. dp /- x. dp 8 x 1. dp 3/8- x. dp 8 x 1. dp 1/- x. dp x 1. dp 31. (1.) 37.1 (1.6) 7 (1.8) 1.3 (.0) 8.9 (.3) 8.9 (.3) 69 (.7) 8.9 (3.3) Page

19 Single cting, Spring etract/spring Extend odels Ø3 - Ø s Spring etract Spring Extend H THEDS ØN THU HOE () ØO C'OE (8 ) H THEDS P PCES Z FTS od end male thread 3 J NUT INCUDED F (HEX) inch or.3 or 8.3 or.38 or 13.3 or 17. or.6 or.7 or 7 F H THEDS H (THEDS) #8-3 x.31 lg or x lg #8-3 x.31 lg or 6 x lg #-3 x.31 lg or 8 x 1. - lg 1/-8 x.37 lg or x lg /- x. lg or 1 x lg 3/8- x. lg or 1 x lg 1/- x.77 lg or 18 x lg etracted inch or 0. or or or or or or or STOE + STOE Note: Inch threads for 'N' port code. etric threads for '' & 'P' port codes. etric for foot, flange, or clevis mount. Tapped hole mounting 3 O (THEDS) #8-3 or x 0.7 #8-3 or x 0.7 1/- or 6 x 1.0 1/- or 6 x 1.0 1/- or 6 x 1.0 1/- or 6 x 1.0 /-18 or 8 x 1. O THED OTH ENDS inch or 0.3 or or 11 + STOE + STOE + ( x STOE) (0.) 6 (0.) (0.39) 1 (0.) 1 (0.) 1 (0.) 17 (0.67) 3. (0.1) 3. (0.1). (0.18) (0.) 7 (0.8) 7 (0.8) 7 (0.8) (0.87) 8 (1.) 36 (1.) (1.7) 3 (1.3) 3 (1.3) (1.7) (1.97) ØN 3. (0.1) 3. (0.1). (0.). (0.). (0.). (0.). (0.) 6.6 (0.6) ØO 6. x 3. dp (0.6 x 0.1 dp) 6. x 3. dp (0.6 x 0.1 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 11.0 x 8.0 dp (0.3 x 0.31 dp) *P x0.8 x0.8 x0.8 x0.8 x0.8 1/8* 1/8* 1/* 7.0 (0.8) (0.3) 8. (0.33) 8.7 (0.3) 8.7 (0.3) 9. (0.36). (0.1) 9.3 (1.9) 9.3 (1.9) 7.0 (.) 70.6 (.78) Z. (0.6). (0.6) 17.8 (0.70). (0.88) (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () Page 19

20 lobal Series Cylinders agnetic Piston Ø - Ø s E E 7(.8) H THEDS + STOE + STOE eed (1.00) Elect. 19 (0.7) FTS ØN THU () ØO C'OE () P PCES Dimensional Data 3 Stroke 7, 7, 7, 7, 7, 7,.0 (1.7) 6. (1.83) 8. (1.91).0 (.13). (.) 7.0 (.9) ong Stroke 33.0 (1.30) 39. (1.6). (1.9) 6.0 (1.81) 3. (.11).0 (.8) 8.7 (.3) 9. (.36). (.1) 11. (.) 1.0 (.) 18.0 (.71) Note 1- See page for complete stroke availability Note - Chart dimensions are shown as (inches) Stroke, 7,, 7, 7, 7, 1, 1 1, 1 1, 1 1, 1 1, 1 1, 1 Extended Stroke 37.3 (1.7) 33.8 (1.33) 39.7 (1.6) 36. (1.) 6.1 (1.8) 1.6 (1.6). (.07) 7. (1.87).8 (.) 7.8 (1.88) 6. (.6). (.19) 67.3 (.6) 9.3 (.33) 7.6 (.86) 6.6 (.) 79. (3.13) 69. (.7) 88.7 (3.9) 76.7 (3.0) 8.9 (.3). (.).1 (.8).7 (.).7 (.).7 (.) 13. (.) 18. (.73) 1.0 (.) 18.0 (.71) Sensors must be ordered separately. See page 37. * Port Size Offerings See dim. column P below N NPT ports, inch rod thread SP parallel ports, metric rod thread P SPT taper ports, metric rod thread Note: x 0.8 port will accept #-3 male thread fi ttings. (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () Stroke ange ~30 (0.~1.18) ~30 (0.~1.18) ~ (0.~.0) ~ (0.~.0) ~ 0.~.0) ~ (0.~.0) ~ (0.39~.0) ~ (0.39~.0) ~ (0.39~.0) ~ (0.39~.0) 31. (1.) 3.0 (1.3) 36.0 (1.) 37. (1.8).0 (1.7) 6. (1.83) 8. (1.91).0 (.13). (.) 7.0 (.9) 8.0 (1.) 30. (1.) 31. (1.) 3. (1.8) 33.0 (1.30) 39. (1.6). (1.9) 6.0 (1.81) 3. (.11).0 (.8) 6 (0.36) 8 (0.31) (0.39) (0.7) (0.0) (0.0) (0.787) (0.787) (0.98) 30 (1.181) (0.98) 9 (1.1) 36 (1.) (1.7). (1.7) (.0).7 (.1) 76.7 (3.0) 97.8 (3.8) 11.3 (.) E 3 (0.90) 7. (1.07) 31. (1.3) 36.9 (1.) H (Threads) x dp minimum #8-3 x.1dp 3 x 0. dp #8-3 x.1dp x 0.7 dp #-3 x.8 dp x dp 1/-8 x.39 dp 6 x 1.0 dp /- x. dp 8 x 1. dp 3/8- x. dp 8 x 1. dp 1/- x. dp x 1. dp 1/- x. dp x 1. dp /8-18 x.88 dp x.0 dp 3/- x.88 dp x. dp 31. (1.) 37.1 (1.6) 7 (1.8) 1.3 (.0) 8.9 (.3) 69 (.7) 8.9 (3.3) 1.8 (.01) 9.8 (.11) 13.9 (6.06) Page --06

21 Double cting, Single od odels Ø3 - Ø s ØN THU HOE () ØO C'OE (8 ) H THEDS 7 (0.8) eed (1.00) Electronic19 (0.7) Slots () for ound Profile Sensors Sensors must be ordered separately. See page 37. Z ound Profi le Sensor Shown P PCES FTS + STOE + STOE See page 37 for round profile sensors featuring surge suppression, polarity protection and dual output. od end male thread 3 F (HEX) inch or.3 or 8.3 or.38 or 13.3 or 17. or.6 or.7 or 7.7 or 7.93 or or 6 J NUT INCUDED F H (THEDS) #8-3 x.31 lg or x lg #8-3 x.31 lg or 6 x lg #-3 x.31 lg or 8 x 1. - lg 1/-8 x.37 lg or x lg /- x. lg or 1 x lg 3/8- x. lg or 1 x lg 1/- x.77 lg or 18 x lg 1/- x.77 lg or 18 x lg /8-18 x 1.00 lg or x lg 3/- x 1. lg or 6 x lg H THEDS inch or 0. or or or or or or or or or or 3. Tapped hole mounting 3 O (THEDS) #8-3 or x 0.7 #8-3 or x 0.7 1/- or 6 x 1.0 1/- or 6 x 1.0 1/- or 6 x 1.0 1/- or 6 x 1.0 /-18 or 8 x 1. 7/-1 or x 1. 1/-13 or x 1.7 1/-13 or x 1.7 O THED OTH ENDS inch or 0.3 or or or 1.13 or or 9 Note: Inch threads for 'N' port code. etric threads for '' & 'P' port codes. etric for foot, fl ange, or clevis mount. (0.) 6 (0.) (0.39) 1 (0.) 1 (0.) 17 (0.67) 17 (0.67) (0.87) 7 (1.06) 3. (0.1) 3. (0.1). (0.18) (0.) 7 (0.8) 7 (0.8) (0.39) (0.7) (0.87) 8 (1.) 36 (1.) (1.7) 3 (1.3) (1.7) (1.97) 60 (.36) 77 (3.03) 9 (3.70) ØN 3. (0.1) 3. (0.1). (0.). (0.). (0.). (0.) 6.6 (0.6) 9 (0.3) 11 (0.3) 11 (0.3) ØO 6. x 3. dp (0.6 x 0.1 dp) 6. x 3. dp (0.6 x 0.1 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 11.0 x 8.0 dp (0.3 x 0.31 dp) 13.7 x. dp (0. x 0.1 dp).8 x 13. dp (0.66 x 0.3 dp).8 x 13. dp (0.66 x 0.3 dp) *P x0.8 x0.8 x0.8 x0.8 1/8* 1/8* 1/* 1/* 3/8* 3/8* 7.0 (0.8) (0.3) 8. (0.33) 8.7 (0.3) 9. (0.36). (0.1) 11. (0.) 1.0 (0.) 18.0 (0.71) 9.3 (1.9) 7.0 (.) 70.6 (.78) 83.6 (3.9) (.09) 1.9 (.) Z. (0.6) 17.8 (0.70). (0.88). (0.88) 7.0 (1.06) 7.0 (1.06) (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () --06 Page 1

22 lobal Series Cylinders agnetic Piston Ø - Ø s E E 7(.8) H THEDS OTH ENDS + ( X STOE) + + STOE STOE eed (1.00) Elect. 19 (0.7) FTS ØN THU () ØO C'OE () P PCES Dimensional Data 3 Stroke 7, 7, 7, 7, 7, 7, 61.8 (.3) 69. (.7) 7.3 (.96).6 (3.17) 89. (3.).7 (3.96) ong Stroke 7.8 (1.88). (.19) 9.3 (.33) 6.6 (.) 69. (.7) 76.7 (3.0).7 (.).7 (.) 13. (.) 18. (.73) 1.0 (.) 18.0 (.71) Note 1- See page for complete stroke availability Note - Chart dimensions are shown as (inches) Stroke, 7,, 7, 7, 7, 1, 1 1, 1 1, 1 1, 1 1, 1 1, 1 Extended Stroke 33.8 (1.33) 36. (1.) 1.6 (1.6) 7. (1.87) 7.8 (1.88). (.19) 9.3 (.33) 6.6 (.) 69. (.7) 76.7 (3.0).8 (1.61) 3. (1.70).6 (1.99) 7. (.6) 61.8 (.3) 69. (.7) 7.3 (.96).6 (3.17) 89. (3.).7 (3.96) 8.9 (.3). (.).1 (.8).7 (.).7 (.).7 (.) 13. (.) 18. (.73) 1.0 (.) 18.0 (.71) odel Code 'T' Hole Size N (N) 1. (.06) 1. (.06) 3.1 (.13) (.13) 3.1 (.13).0 (.).0 (.) 6.3 (.) 6.3 (. (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () Stroke ange ~30 (0.~1.18) ~30 (0.~1.18) ~ (0.~.0) ~ (0.~.0) ~ 0.~.0) ~ (0.~.0) ~ (0.39~.0) ~ (0.39~.0) ~ (0.39~.0) ~ (0.39~.0) 39. (1.) 3.0 (1.69) 7.0 (1.8) 9.0 (1.93). (.1) 6.0 (.) 66. (.6) 68.0 (.68) 81.0 (3.19) 9. (3.7) 3. (1.8) 36.0 (1.) 38.0 (1.) 39 (1.). (1.9).0 (1.97). (1.99).0 (.0) 61.0 (.) 70. (.78) 6 (0.36) 8 (0.31) (0.39) (0.7) (0.0) (0.0) (0.787) (0.787) (0.98) 30 (1.181) (0.98) 9 (1.1) 36 (1.) (1.7). (1.7) (.0).7 (.1) 76.7 (3.0) 97.8 (3.8) 11.3 (.) E 3 (0.90) 7. (1.07) 31. (1.3) 36.9 (1.) H (Threads) x dp minimum #8-3 x.1dp 3 x 0. dp #8-3 x.1dp x 0.7 dp #-3 x.8 dp x dp 1/-8 x.39 dp 6 x 1.0 dp /- x. dp 8 x 1. dp 3/8- x. dp 8 x 1. dp 1/- x. dp x 1. dp 1/- x. dp x 1. dp /8-18 x.88 dp x.0 dp 3/- x.88 dp x. dp 31. (1.) 37.1 (1.6) 7 (1.8) 1.3 (.0) 8.9 (.3) 69 (.7) 8.9 (3.3) 1.8 (.01) 9.8 (.11) 13.9 (6.06) Page

23 Double cting, Double od odels Ø3 - Ø s H THEDS OTH ENDS ØN THU HOE () ØO C'OE (8 ) 7 (0.8) Slots () for ound Profile Sensors Z eed (1.00) Electronic19 (0.7) P PCES FTS + STOE + STOE + ( X STOE) Sensors must be ordered separately. See page 37. * Port Size Offerings See dim. column P below N NPT ports, inch rod thread SP parallel ports, metric rod thread P SPT taper ports, metric rod thread Note: x 0.8 port will accept #-3 male thread fi ttings. od end male thread Tapped hole mounting Note: 3 J NUT INCUDED F (HEX) inch or.3 or 8.3 or.38 or 13.3 or 17. or.6 or.7 or 7.7 or 7.93 or or 6 F H THEDS H (THEDS) #8-3 x.31 lg or x lg #8-3 x.31 lg or 6 x lg #-3 x.31 lg or 8 x 1. - lg 1/-8 x.37 lg or x lg /- x. lg or 1 x lg 3/8- x. lg or 1 x lg 1/- x.77 lg or 18 x lg 1/- x.77 lg or 18 x lg /8-18 x 1.00 lg or x lg 3/- x 1. lg or 6 x lg + STOE inch or 0. or or or or or or or or or or 3. 3 O (THEDS) #8-3 or x 0.7 #8-3 or x 0.7 1/- or 6 x 1.0 1/- or 6 x 1.0 1/- or 6 x 1.0 1/- or 6 x 1.0 /-18 or 8 x 1. 7/-1 or x 1. 1/-13 or x 1.7 1/-13 or x 1.7 O THED OTH ENDS inch or 0.3 or or or 1.13 or or 9 Inch threads for 'N' port code. etric threads for '' & 'P' port codes. etric for foot or fl ange mount. (0.) 6 (0.) (0.39) 1 (0.) 1 (0.) 17 (0.67) 17 (0.67) (0.87) 7 (1.06) 3. (0.1) 3. (0.1). (0.18) (0.) 7 (0.8) 7 (0.8) (0.39) (0.7) (0.87) 8 (1.) 36 (1.) (1.7) 3 (1.3) (1.7) (1.97) 60 (.36) 77 (3.03) 9 (3.70) ØN 3. (0.1) 3. (0.1). (0.). (0.). (0.). (0.) 6.6 (0.6) 9 (0.3) 11 (0.3) 11 (0.3) ØO 6. x 3. dp (0.6 x 0.1 dp) 6. x 3. dp (0.6 x 0.1 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 11.0 x 8.0 dp (0.3 x 0.31 dp) 13.7 x. dp (0. x 0.1 dp).8 x 13. dp (0.66 x 0.3 dp).8 x 13. dp (0.66 x 0.3 dp) *P x0.8 x0.8 x0.8 x0.8 1/8* 1/8* 1/* 1/* 3/8* 3/8* 7.0 (0.8) (0.3) 8. (0.33) 8.7 (0.3) 9. (0.36). (0.1) 11. (0.) 1.0 (0.) 18.0 (0.71) 9.3 (1.9) 7.0 (.) 70.6 (.78) 83.6 (3.9) (.09) 1.9 (.) Z. (0.6) 17.8 (0.70). (0.88). (0.88) 7.0 (1.06) 7.0 (1.06) (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () --06 Page 3

24 lobal Series Cylinders agnetic Piston Ø - Ø s Sensors must be ordered separately. See page 37. E 7 (.8) ØN THU () ØO C'OE () H TP ØT + STOE + STOE eed (1.00) Elect. 19 (0.7) Dimensional Data Note 1- See page for complete stroke availability Note - Chart dimensions are shown as (inches) od fl ats (Dim. ) nominally in-line with ports P PCES (.) (.) 8 (.3) 8 (.3) arning THIS CYINDE HS NON-OTTIN OD. TO PEVENT INTEN DE HOD OD Y FTS ONY HEN FUY ETCTED HIE INSTIN O EOVIN TTCHENTS. DO NOT SCTCH O DENT SHFT. size 3 Nonrotating rod accuracy ± ±1 ±1 ±1 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 3 Stroke 7, 7, 7, 7, 7, 7, 9.0 (1.93) 6. (1.83) 8. (1.91).0 (.13). (.) 7.0 (.9) ong Stroke.0 (1.6) 39. (1.6). (1.9) 6.0 (1.81) 3. (.11).0 (.8) 8.7 (.3) 9. (.36). (.1) 11. (.) 1.0 (.) 18.0 (.71) Stroke, 7,, 7, 7, 7, 1, 1 1, 1 1, 1 1, 1 1, 1 1, 1 Extended Stroke.3 (1.67).7 (1.76).1 (.13) 60. (.38).8 (.1) 6. (.6) 67.3 (.6) 7.6 (.86) 79. (3.13) 88.7 (3.9) 38.8 (1.3) 1. (1.6) 9.6 (1.9). (.19) 6.8 (.). (.19) 9.3 (.33) 6.6 (.) 69. (.7) 76.7 (3.0) 8.9 (.3). (.).1 (.8).7 (.).7 (.).7 (.) 13. (.) 18. (.73) 1.0 (.) 18.0 (.71) * Port Size Offerings See dim. column P below N NPT ports, inch rod thread SP parallel ports, metric rod thread P SPT taper ports, metric rod thread Note: x 0.8 port will accept #-3 male thread fi ttings. (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () Stroke ange ~30 (0.~1.18) ~30 (0.~1.18) ~ (0.~.0) ~ (0.~.0) ~ (0.~.0) ~ (0.~.0) ~ (0.39~.0) ~ (0.39~.0) ~ (0.39~.0) ~ (0.39~.0) 36. (1.) 39.0 (1.).0 (1.73). (1.79) 9.0 (1.93) 6. (1.83) 8. (1.91).0 (.13). (.) 7.0 (.9) 33.0 (1.30) 3. (1.) 39. (1.6). (1.9).0 (1.6) 39. (1.6). (1.9) 6.0 (1.81) 3. (.11).0 (.8) 6 (0.36) 8 (0.31) (0.39) (0.7) (0.0) (0.0) (0.787) (0.787) (0.98) 30 (1.181) (0.98) 9 (1.1) 36 (1.) (1.7). (1.7) (.0).7 (.1) 76.7 (3.0) 97.8 (3.8) 11.3 (.) E 3 (0.90) 7. (1.07) 31. (1.3) 36.9 (1.) H (Threads) x dp minimum #8-3 x.1dp 3 x 0. dp #8-3 x.1dp x 0.7 dp #-3 x.8 dp x dp 1/-8 x.39 dp 6 x 1.0 dp /- x. dp 8 x 1. dp 3/8- x. dp 8 x 1. dp 1/- x. dp x 1. dp 1/- x. dp x 1. dp /8-18 x.88 dp x.0 dp 3/- x.88 dp x. dp 31. (1.) 37.1 (1.6) 7 (1.8) 1.3 (.0) 8.9 (.3) 69 (.7) 8.9 (3.3) 1.8 (.01) 9.8 (.11) 13.9 (6.06) Page 6--06

25 Ø3 Double cting, Non-otating Piston od odels H TP ØN THU HOE () ØO C'OE () 7 (0.8) eed (1.00) Electronic 19 (0.7) P PCES Z ØT H TP Ø- Ø s ØN THU HOE () ØO C'OE (8) Z 7 (0.8) P PCES ØT Slots () for ound Profile Sensors Slots () for ound Profile Sensors See page 37 for round profile sensors featuring surge suppression, polarity protection and dual output. + STOE + STOE 9 (.3) + STOE + STOE eed (1.00) Electronic 19 (0.7) (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () od fl ats (Dim. ) nominally in-line with ports ØT 1 +0/ 0.03 ( /0.00) +0/ 0.0 ( /0.00) 13 +0/ 0.03 (0. +0/0.00) 1 +0/ 0.03 ( /0.00) 1 +0/ 0.06 ( /0.00) 8 +0/ 0.06 (1. +0/0.00) 3 +0/ 0.06 ( /0.00) 3 +0/ 0.06 ( /0.00) 3 +0/ 0.06 ( /0.00) 9 +0/ 0.07 (.33 +0/0.003) 1. (0.09) 1. (0.09).0 (0.079).0 (0.079).0 (0.079).0 (0.079).0 (0.079).0 (0.079).0 (0.079).0 (0.079) od end male thread H THEDS Tapped hole mounting J NUT INCUDED F O THED OTH ENDS 3 F (HEX) inch or.3 or 8.3 or.38 or 13.3 or 17. or.6 or.7 or 7.7 or 7.93 or or 6 H (THEDS) #8-3 x.31 lg or x lg #8-3 x.31 lg or 6 x lg #-3 x.31 lg or 8 x 1. - lg 1/-8 x.37 lg or x lg /- x. lg or 1 x lg 3/8- x. lg or 1 x lg 1/- x.77 lg or 18 x lg 1/- x.77 lg or 18 x lg /8-18 x 1.00 lg or x lg 3/- x 1. lg or 6 x lg inch or 0. or or or or or or or or or or 3. 3 O (THEDS) #8-3 or x 0.7 #8-3 or x 0.7 1/- or 6 x 1.0 1/- or 6 x 1.0 1/- or 6 x 1.0 1/- or 6 x 1.0 /-18 or 8 x 1. 7/-1 or x 1. 1/-13 or x 1.7 1/-13 or x 1.7 Places Front F inch or 0. or 0. or 0.98 or 0.98 or 1.0 or or 1.13 or or 9 Places ear inch or 0.3 or or or 1.13 or or 9. (0.) 6 (0.) (0.39) 1 (0.) 1 (0.) 18 (0.71) 18 (0.71) (0.87) 7 (1.06) 3. (0.1) 3. (0.1). (0.18) (0.) 7 (0.8) 7 (0.8) (0.39) (0.7) (0.87) 8 (1.) 36 (1.) (1.7) 3 (1.3) (1.7) (1.97) 60 (.36) 77 (3.03) 9 (3.70) ØN 3. (0.1) 3. (0.1). (0.). (0.). (0.). (0.) 6.6 (0.6) 9 (0.3) 11 (0.3) 11 (0.3) ØO 6. x 3. dp (0.6 x 0.1 dp) 6. x 3. dp (0.6 x 0.1 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 11.0 x 8.0 dp (0.3 x 0.31 dp) 13.7 x. dp (0. x 0.1 dp).8 x 13. dp (0.66 x 0.3 dp).8 x 13. dp (0.66 x 0.3 dp) *P x0.8 x0.8 x0.8 x0.8 1/8* 1/8* 1/* 1/* 3/8* 3/8* 7.0 (0.8) (0.3) 8. (0.33) 8.7 (0.3) 9. (0.36). (0.1) 11. (0.) 1.0 (0.) 18.0 (0.71) 9.3 (1.9) 7.0 (.) 70.6 (.78) 83.6 (3.9) (.09) 1.9 (.) Z. (0.6) 17.8 (0.70). (0.88). (0.88) 7.0 (1.06) 7.0 (1.06) (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () Page

26 lobal Series Cylinders agnetic Piston arning THIS CYINDE HS NON-OTTIN OD. TO PEVENT INTEN DE HOD OD Y FTS ONY HEN FUY ETCTED HIE INSTIN O EOVIN TTCHENTS. DO NOT SCTCH O DENT SHFT. Ø - Ø s Sensors must be ordered separately. See page 37. E 7(.8) ØN THU () ØO C'OE () + ( x STOE) + STOE + STOE eed (1.00) Elect. 19 (0.7) ØT H TP OTH ENDS P PCES Dimensional Data od fl ats (Dim. ) nominally in-line with ports (.) (.) 8 (.3) 8 (.3) size 3 Nonrotating rod accuracy ± ±1 ±1 ±1 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 ±0.8 3 Stroke 7, 7, 7, 7, 7, 7, 70.8 (.79) 69. (.7) 7.3 (.96).6 (3.17) 89. (3.).7 (3.96) ong Stroke 6.8 (.). (.19) 9.3 (.33) 6.6 (.) 69. (.7) 76.7 (3.0).7 (.).7 (.) 13. (.) 18. (.73) 1.0 (.) 18.0 (.71) Stroke, 7,, 7, 7, 7, 1, 1 1, 1 1, 1 1, 1 1, 1 1, 1 Extended Stroke 38.8 (1.3) 1. (1.6) 9.6 (1.9). (.19) 6.8 (.). (.19) 9.3 (.33) 6.6 (.) 69. (.7) 76.7 (3.0).8 (1.) 8. (1.90) 8.6 (.31) 6. (.8) 70.8 (.79) 69. (.7) 7.3 (.96).6 (3.17) 89. (3.).7 (3.96) 8.9 (.3). (.).1 (.8).7 (.).7 (.).7 (.) 13. (.) 18. (.73) 1.0 (.) 18.0 (.71) odel Code '' Hole Size N (N) 1. (.06) 1. (.06) 3.1 (.13) (.13) 3.1 (.13).0 (.).0 (.) 6.3 (.) 6.3 (.) (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () Stroke ange ~30 (0.~1.18) ~30 (0.~1.18) ~ (0.~.0) ~ (0.~.0) ~ (0.~.0) ~ (0.~.0) ~ (0.39~.0) ~ (0.39~.0) ~ (0.39~.0) ~ (0.39~.0). (1.7) 8.0 (1.89).0 (.17) 7.0 (.). (.) 6.0 (.) 66. (.6) 68.0 (.68) 81.0 (3.19) 9. (3.7) 37. (1.7) 1.0 (1.61) 6.0 (1.81) 7.0 (1.8) 9. (1.9).0 (1.97). (1.99).0 (.0) 61.0 (.) 70. (.78) 6 (0.36) 8 (0.31) (0.39) (0.7) (0.0) (0.0) (0.787) (0.787) (0.98) 30 (1.181) (0.98) 9 (1.1) 36 (1.) (1.7). (1.7) (.0).7 (.1) 76.7 (3.0) 97.8 (3.8) 11.3 (.) E 3 (0.90) 7. (1.07) 31. (1.3) 36.9 (1.) H (Threads) x dp minimum #8-3 x.1dp 3 x 0. dp #8-3 x.1dp x 0.7 dp #-3 x.8 dp x dp 1/-8 x.39 dp 6 x 1.0 dp /- x. dp 8 x 1. dp 3/8- x. dp 8 x 1. dp 1/- x. dp x 1. dp 1/- x. dp x 1. dp /8-18 x.88 dp x.0 dp 3/- x.88 dp x. dp 31. (1.) 37.1 (1.6) 7 (1.8) 1.3 (.0) 8.9 (.3) 69 (.7) 8.9 (3.3) 1.8 (.01) 9.8 (.11) 13.9 (6.06) Page

27 Double cting, Double od, Nonrotating Piston od odels Ø3 H TP OTH ENDS ØN THU HOE () ØO C'OE () Z Slots () for ound Profile Sensors 7 (0.8) od fl ats (Dim. ) nominally in-line with ports * Port Size Offerings See dim. column P below N NPT ports, inch rod thread SP parallel ports, metric rod thread P SPT taper ports, metric rod thread Note: x 0.8 port will accept #-3 male thread fi ttings. ØT eed (1.00) Electronic 19 (0.7) P PCES 9 (.3) + STOE + STOE + ( x STOE) (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () Ø- Ø s ØN THU HOE () ØO C'OE (8) H TP OTH ENDS ØT 1 +0/ 0.03 ( /0.00) +0/ 0.0 ( /0.00) 13 +0/ 0.03 (0. +0/0.00) 1 +0/ 0.03 ( /0.00) 1 +0/ 0.06 ( /0.00) 8 +0/ 0.06 (1. +0/0.00) 3 +0/ 0.06 ( /0.00) 3 +0/ 0.06 ( /0.00) 3 +0/ 0.06 ( /0.00) 9 +0/ 0.07 (.33 +0/0.003) Z 7 (0.8) Slots () for ound Profile Sensors P PCES ØT + STOE eed (1.00) Electronic 19 (0.7) + ( x STOE) 1. (0.09) 1. (0.09).0 (0.079).0 (0.079).0 (0.079).0 (0.079).0 (0.079).0 (0.079).0 (0.079).0 (0.079) + STOE od end male thread H THEDS 3 F (HEX) inch or.3 or 8.3 or.38 or 13.3 or 17. or.6 or.7 or 7.7 or 7.93 or or 6 J NUT INCUDED F H (THEDS) #8-3 x.31 lg or x lg #8-3 x.31 lg or 6 x lg #-3 x.31 lg or 8 x 1. - lg 1/-8 x.37 lg or x lg /- x. lg or 1 x lg 3/8- x. lg or 1 x lg 1/- x.77 lg or 18 x lg 1/- x.77 lg or 18 x lg /8-18 x 1.00 lg or x lg 3/- x 1. lg or 6 x lg + STOE inch or 0. or or or or or or or or or or 3. Tapped hole mounting Note: Inch threads for 'N' port code. etric threads for '' & 'P' port codes. etric for foot, flange, or clevis mount. 3 O (THEDS) #8-3 or x 0.7 #8-3 or x 0.7 1/- or 6 x 1.0 1/- or 6 x 1.0 1/- or 6 x 1.0 1/- or 6 x 1.0 /-18 or 8 x 1. 7/-1 or x 1. 1/-13 or x 1.7 1/-13 or x 1.7 Places Front F inch or 0. or 0. or 0.98 or 0.98 or 1.0 or or 1.13 or or 9 Places ear O THED OTH ENDS inch or 0.3 or or or 1.13 or or 9. (0.) 6 (0.) (0.39) 1 (0.) 1 (0.) 18 (0.71) 18 (0.71) (0.87) 7 (1.06) 3. (0.1) 3. (0.1). (0.18) (0.) 7 (0.8) 7 (0.8) (0.39) (0.7) (0.87) 8 (1.) 36 (1.) (1.7) 3 (1.3) (1.7) (1.97) 60 (.36) 77 (3.03) 9 (3.70) ØN 3. (0.1) 3. (0.1). (0.). (0.). (0.). (0.) 6.6 (0.6) 9 (0.3) 11 (0.3) 11 (0.3) ØO 6. x 3. dp (0.6 x 0.1 dp) 6. x 3. dp (0.6 x 0.1 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 11.0 x 8.0 dp (0.3 x 0.31 dp) 13.7 x. dp (0. x 0.1 dp).8 x 13. dp (0.66 x 0.3 dp).8 x 13. dp (0.66 x 0.3 dp) *P x0.8 x0.8 x0.8 x0.8 1/8* 1/8* 1/* 1/* 3/8* 3/8* 7.0 (0.8) (0.3) 8. (0.33) 8.7 (0.3) 9. (0.36). (0.1) 11. (0.) 1.0 (0.) 18.0 (0.71) 9.3 (1.9) 7.0 (.) 70.6 (.78) 83.6 (3.9) (.09) 1.9 (.) Z. (0.6) 17.8 (0.70). (0.88). (0.88) 7.0 (1.06) 7.0 (1.06) (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () Page 7

28 lobal Series Cylinders agnetic Piston Precision Stroke djustment Emphasizing Operator Safety Full stroke adjustment on all strokes. agnetic piston is a standard feature. pply sensors (ordered separately) to dovetail or round slots for mid-stroke and end-of-stroke sensing. djustable Extend Stroke Cylinders Fabco-ir's popular Dial--Stroke adjustment assembly is now available on lobal Series Cylinders to provide a rugged, precision adjustment of the cylinder extend stroke. Cylinders are offered in double acting models in bore sizes of 3 through with full stroke adjustment. agnetic pistons are included for use with any of the electronic or reed sensors. Sensors must be ordered separately. See page 37. Operator Safety The stop tube, adjustment nut with skirt, and minimum clearances combine to eliminate pinch points. Note - Chart dimensions are shown as (inches) Dimensional Data Construction The stop tube is black anodized aluminum the adjustment nut is blackened steel with a black anodized aluminum skirt the stop fl ange is red anodized aluminum: all for corrosion resistance and appearance. The adjustment nut, steel for long life, includes a lock screw with a plastic plug so the adjustment nut can be locked in place without damaging the threads. Precision adjustment is achieved with fi ne pitch threads on the adjustment rod. The stop fl ange is mounted on the end of the adjustment rod so the nut will not come off. djustment djustment settings are simplifi ed by the convenient scale markings. s 3 and have a 1/- thread giving.0" (1.3) adjustment per nut revolution. s and larger have a 3/- thread giving.0" (1.6) adjustment per revolution. How to Order (See page 9 - model codes & ; see page 9 - mounting codes.) Example 1: To order a bore, 7 stroke unit with Dial-a-Stroke, NPT ports, and rod end tap mount, specify odel No. ND007D Example : lso available with nonrotating rod; use body length '' dimension from page 6, tapped hole mounting information from page 7 and insert the non-rotating rod Code '' in model number. To order bore, 7 stroke, nonrotating rod, with Dial-a-Stroke, NPT ports, and ISO fl ange specify odel No. ND007D Note hen ordering units with fl ange or foot mounts, the rod stickout (Dim. "") increases per dimension on pages 31 or 3. OE 3 (1-1/) (1-1/) () (-1/) (3-1/) () 1,,. (1.9).0 (1.97). (1.99).0 (.0) 61.0 (.) 70. (.78) STOE 7,, 1, (1.88). (.19) 9.3 (.33) 6.6 (.) 69. (.7) 76.7 (3.0) (0.0) (0.0) (0.787) (0.787) (0.98) 30 (1.181). (1.7) (.0).7 (.1) 76.7 (3.0) 97.8 (3.8) 11.3 (.) H (THEDS) /- x. dp 8 x dp 3/8- x.7 dp 8 x dp 1/- x.69 dp x 1. dp 1/- x.69 dp x 1. dp /8-18 x.96 dp x.0 1dp 3/- x 1.06 dp x. 30 dp 8.9 (.3) 69.0 (.7) 8.9 (3.3) 1.8 (.01) 9.8 (.11) 13.9 (6.06) 1 (0.) 1 (0.) 17 (0.67) 17 (0.67) (0.87) 7 (1.06) 7 (0.8) 7 (0.8) (0.39) (0.7) 3 (1.3) (1.7) (1.97) 60 (.36) 77 (3.03) 9 (3.70) Page

29 Dial--Stroke djustable Extend Stroke odels Ø3 - Ø s H THEDS Standard mounting Code "" Tapped Holes places useable at rod end only. lso includes thru holes ØN w/c'bore ØO Optional mounting See How to Order note page 8. Code "E" Front Flange Code "" ISO Front Flange Code "" Foot ount Note!! Use caution when mounting to avoid creating pinch points with other parts of your machinery 7 (0.8) eed (1.00) Electronic19 (0.7) T lso available with Nonrotating rod. See page 8 example. Sensors must be ordered separately. See page 37. STOE Z ØS FTS od end male thread OE 3 ØN. (0.). (0.) 6.6 (0.6) 9 (0.3) 11 (0.3) 11 (0.3) F (HEX) inch or. or.6 or.7 or 7.7 or 7.93 or or 6 J NUT INCUDED F H (THEDS) /- x. lg or 1 x lg 3/8- x. lg or 1 x lg 1/- x.77 lg or 18 x lg 1/- x.77 lg or 18 x lg /8-18 x 1.00 lg or x lg 3/- x 1. lg or 6 x lg ØO 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 11.0 x 8.0 dp (0.3 x 0.31 dp) 13.7 x. dp (0. x 0.1 dp).8 x 13. dp (0.66 x 0.3 dp).8 x 13. dp (0.66 x 0.3 dp) *P 1/8* 1/8* 1/* 1/* 3/8* 3/8* H THEDS inch or 0.78 or or or or or or 3. STOE 1,, 7,, 1, (0.3).7 (0.) 9. (0.36).7 (0.). (0.1) 13. (0.) 11. (0.) 18. (0.73) 1.0 (0.) 1.0 (0.) 18.0 (0.71) 18.0 (0.71) + STOE Note: Inch threads for 'N' port code. etric threads for '' & 'P' port codes. etric for foot, flange, or clevis mount. Tapped hole mounting 3 F O (THEDS) 1/- or 6 x 1.0 1/- or 6 x 1.0 /-18 or 8 x 1. 7/-1 or x 1. 1/-13 or x 1.7 1/-13 or x (1.6) 1.1 (1.6) 3.6 (.11).6 (.07) 6.6 (.3) 6.1 (.6) ØS 38 (1.) 38 (1.).8 (.0).8 (.0).8 (.0).8 (.0) O THED P PCES + ( x STOE) F inch or 0.87 or 1.13 or or 9 T 7.6 (.30) 7.6 (.30).0 (.7) 11.0 (.3) 1.0 (.9) 1.0 (.9) 9.3 (1.9) 7.0 (.) 70.6 (.78) 83.6 (3.9) (.09) 1.9 (.) * Port Size Offerings See dim. column P below N NPT ports, inch rod thread SP parallel ports, metric rod thread P SPT taper ports, metric rod thread Z. (0.6) 17.8 (0.70). (0.88). (0.88) 7.0 (1.06) 7.0 (1.06) 3 (1-1/) (1-1/) () (-1/) (3-1/) () Page 9

30 lobal Series Cylinders ear Clevis ount Ø - Ø s T Ø Pin N OT PCES C CU CX CZ Ø3 - Ø s Note: ll clevis mounts attach to cylinder body with metric size socket cap screws T Ø Pin Note: Pin diameter will be inch size for cylinders with port code 'N' and size for cylinders with port code '' or 'P'. N OT PCES 3 N OT x0.7 x0.7 6x1.0 6x1.0 6x1.0 6x1.0 8x1. x1. x1.7 x1.7 CU CX C CZ ear Clevis ount Dimensions (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () Ø Pin Nominal or inch or.187 or or.3 or.37 or.37 or.37 1 or.0 1 or.0 18 or.7 or.87 C 1 (0.) 1 (0.9) 18 (0.71) (0.79) (0.79) (0.87) 8 (1.) 30 (1.18) 38 (1.) (1.77) CU 7.0 (0.8) (0.39) (0.7) 1 (0.) 1 (0.) 1 (0.) (0.79) (0.79) 7 (1.07) 31 (1.) CX.3 (0.1) 6.8 (0.7) 8.3 (0.33).3 (0.1) 18.3 (0.7) 18.3 (0.7).3 (0.88).3 (0.88) 8.3 (1.11) 3.3 (1.7) CZ (0.39) (0.7) (0.) (0.79) 36 (1.) 36 (1.) (1.73) (1.73) 6 (.) 6 (.) T (0.) (0.) (0.) (0.) 6 (0.) (0.39) 11 (0.3) 1 (0.).8 (0.11).8 (0.11).0 (0.).0 (0.).0 (0.).0 (0.).0 (0.) 6.0 (0.) 7.0 (0.8) 7.0 (0.8) 6.0 (0.) 6.0 (0.) 9.0 (0.3) (0.39) (0.39) (0.39) 1 (0.) 1 (0.) 18 (0.71) (0.87) (0.98) 9 (1.1) 36 (1.) (1.7). (1.7) (.0).7 (.1) 76.7 (3.0) 97.8 (3.8) 11.3 (.) Page

31 Foot ounts Ø - Ø s N OT PCES T Double od +Stroke Y H X Z X Y D PCES T Y X Ø3 - Ø s Note: ll feet attach to cylinder body with metric size socket cap screws T H Y N OT PCES 3 N OT x0.7 x0.7 6x1.0 6x1.0 6x1.0 6x1.0 8x1. x1. x1.7 x1.7 X Z D PCES Foot ount Dimensions X Y T Y X (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () D. (0.18). (0.18) 6.6 (0.6) 6.6 (0.6) 6.6 (0.6) 6.6 (0.6) 9.0 (0.3) 11 (0.3) 13 (0.1) 13 (0.1) H 17 (0.67) 19 (0.7) (0.9) 6 (1.0) 30 (1.18) 33 (1.30) 39 (1.) 6 (1.81) 9 (.3) 71 (.) X 3 (1.3) 38 (1.) 8 (1.89) (.0) 7 (.) 6 (.) 79 (3.11) 9 (3.7) 118 (.6) 137 (.39) Y 9. (1.) 33. (1.3).0 (1.6) 6.0 (1.81) 7.0 (.) 6.0 (.) 78.0 (3.07) 91. (3.60) 11 (.9) 136 (.3) Z (1.73) 8 (1.89) 6 (.) 66 (.60) 71 (.) 78 (3.07) 9 (3.7) 113 (.) 1 (.1) (6.38) 13. (0.3) 13. (0.3) 1. (0.7) 1 (0.9) 17 (0.67) 17 (0.67) 18 (0.71) 18 (0.71) (0.79) (0.87) T (0.08) (0.08) 3. (0.13) 3. (0.13) 3. (0.13) 3. (0.13) 3. (0.13) 3. (0.13). (0.18) 6.0 (0.) X 9. (0.36).7 (0.) 11. (0.) 11. (0.) 1.7 (0.8). (0.6) 19. (0.77) 3 (0.91) Y. (0.18).0 (0.).8 (0.3).8 (0.3).8 (0.3) 7.0 (0.8) 8.0 (0.31) 9.0 (0.3) 11.0 (0.3). (0.9).8 (0.11).8 (0.11).0 (0.).0 (0.).0 (0.).0 (0.).0 (0.) 6.0 (0.) 7.0 (0.8) 7.0 (0.8) Page 31

32 lobal Series Cylinders Flange ounts Front Flange Ø - Ø s N olt Places FT FV D Places FX FZ ear Flange Ø - Ø s FV FD Places N olt Places FT FX FZ Note: ll flanges attach to cylinder body with metric size flat head socket screws ear Flange Ø3 - Ø s N olt Places (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () FX FZ Front Flange Ø3 - Ø s N olt Places FY FV FD Places Flange ount Dimensions FT. (0.). (0.) 9 (0.3) 9 (0.3) 11 (0.3) 11 (0.3) FT Coon Dimensions 8.0 (0.31) 8.0 (0.31) 6. (0.6) 7.0 (0.8) 9.0 (0.3) 9.0 (0.3) 9.0 (0.3) 9.0 (0.3) 9.0 (0.3) 11 (0.3) 3 N olt x 0.7 x x x x x x 1. x 1. x 1.7 x 1.7 FD. (0.). (0.) 6.6 (0.6) 6.6 (0.6) 7 (0.8) 9 (0.3) 9 (0.3) 9 (0.3) (0.7) 1 (0.) FD. (0.18). (0.18) 6.6 (0.6) 6.6 (0.6). (0.). (0.) 6.6 (0.6) 9 (0.3) 11 (0.3) 11 (0.3) FT FD Places FX FZ ISO ectangular Flange Dimensions FY 3 (1.6) 36 (1.) (1.77) (1.97) (.8) 7 (.9) Interchange (Non-ISO) Flange Dimensions FY 3 (1.3) (1.7) (1.97) 60 (.36) 77 (3.03) 9 (3.70) FX (1.7) (1.7) (1.97) (1.97) 6 (.) 7 (.83) 90 (3.) (3.9) 6 (.96) 1 (.91) FX (1.77) (1.77) 8 (1.89) (.0) 6 (.) 6 (.) 76 (.99) 9 (3.6) 1 (.7) 136 (.3) FV (0.98) 30 (1.18) 39 (1.) (1.6) 8 (1.89) (.13) 67 (.6) (3.1) 99 (3.90) 117 (.61) FV (0.98) 30 (1.18) 39 (1.) (1.6) 8 (1.89) (.13) 67 (.6) (3.1) 99 (3.90) 117 (.61) FZ (1.97) (1.97) 6 (.) 6 (.) 76 (.99) 88 (3.7) 6 (.17) 1 (.7) 1 (.91) 178 (7.01) FZ (.17) (.17) 60 (.36) 6 (.) 6 (.6) 7 (.83) 89 (3.) 8 (.) 13 (.8) 1 (6.06) FY FV Page

33 Front & ear oss ounts ear oss Ø - Ø s Front oss Ø - Ø s ØT ØT ear oss Ø3 - Ø s Front oss Ø3 - Ø s ØT ØT oss ount Dimensions (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () ØT 1 +0/ 0.03 ( /0.00) +0/ 0.0 ( /0.00) 13 +0/ 0.03 (0. +0/0.00) 1 +0/ 0.03 ( /0.00) 1 +0/ 0.06 ( /0.00) 8 +0/ 0.06 (1. +0/0.00) 3 +0/ 0.06 ( /0.00) 3 +0/ 0.06 ( /0.00) 3 +0/ 0.06 ( /0.00) 9 +0/ 0.07 (.33 +0/0.003) 1. (0.09) 1. (0.09).0 (0.079).0 (0.079).0 (0.079).0 (0.079).0 (0.079).0 (0.079).0 (0.079).0 (0.079) --06 Page 33

34 lobal Series Cylinders ack-to-ack Cylinders Option XC Note 1: vailable double acting only Note : agnetic piston body style "D" includes magnet in both cylinder sections Tie bolts are used in all holes ack-to-back cylinders are for use where three or four rod positions are required. Two cylinders are assembled back-to-back with bolts threaded into tapped end mounting holes. Different strokes on each cylinder enable having four positive stop positions when the units are mounted at the rod ends. ack-to-back cylinders provide independent piston rods on each end of the unit. To order specify the desired strokes with a slash between the 3-digit stroke codes, then follow model number with option suffix XC Consult factory to confirm total body length 1. Ordering Example lobal Series, NPT ports, magnetic piston, bore, dual strokes of 30 and, bumpers both ends and male rod ends. The odel Number is: ND S0 030 / 0D XC. non-rotating rod can be fi tted to one section. The position of "" model code determines the stroke of the non-rotating rod cylinder section. Example: NN S0 030/0D XC "S" Indicates 30 stroke single rod "" indicates stroke non-rotating rod Tandem Cylinders Option XC11 & XC Note: vailable double acting only XC11 ounting: Code '' tapped holes at rod end. Code 'E' or '' fl ange optional Tandem cylinders are generally used when three distinct rod positions are required. Two cylinders are assembled tip-to-tail with bolts threaded into the rear tapped mounting holes of the forward cylinder. Using cylinders with two different strokes (the shorter located on the rear cylinder), enables a single rod to be extended to a positive midposition or to full extension. To order specify the desired strokes with a slash between the 3-digit stroke codes, then follow model number with option suffix XC11 or XC Note: ore than three positions can be obtained by assembling multiple cylinders together. Please consult the factory for these special requirements. T T1 hen a single magnetic piston is ordered, it is applied in the forward cylinder Ordering Example lobal Series, SPT ports, with single magnetic piston, bore, dual strokes of 7 and, and male rod thread. The odel Number is: PD S0 07/D XC11 hen magnets and bumpers are required in both forward and rear cylinders, and tapped holes are required at cap end, order as T Consult factory to confirm total body length PDD S0 07 /D XC T1 Page

35 Cylinder Options and Universal Seal its Position pplication 1 djustable etract Stroke Option S vailable on s and arger Thread sealing locknut 3 Pressure applied to piston Open to atmosphere n adjusting screw with a thread sealing locknut mounted in a thick rear cover provides a simple, yet rugged adjustment of the cylinder stroke in the retract direction. The fine thread of the adjusting screw provides precision adjustment. s, and 3 have a /- thread giving.0" (1.1) adjustment per revolution. s thru have a 1/- thread giving.0" (1.3) adjustment. djusting screw The adjustable retract stroke option is available on bores and larger for any stroke. Standard adjustment is up to and including. For over adjustment specify adjustment length after the option designation S. Example: for adjustment the option designation becomes S- 3 Position pplication Viton Seals Option V For elevated temperatures from 6C to C (-1F to +0 F) or for compatibility with hostile media. Consult engineering for compatibility information. 3 1 Pressure applied to piston Open to atmosphere Universal Seal its For single and double rod cylinders and adjustable stroke models. Nonrotating rod seals are available separately. Seals for options are available on request. 3 una N - S - S - S - S 3 - S - S - S - S - S - S Seal it Viton - SV - SV - SV - SV 3 - SV - SV - SV - SV - SV - SV Non-otating od Seal 9--0 Page 3

36 lobal Series Cylinders ccessories od Eye To order a od Eye use the Prefix E followed by the thread size. Example: For a bore cylinder the inch rod threads are 1/-8. The od Eye Part Number is /-8 For #8-3 size, follow with or for bore. Example: E U X Z Ø Hole ad. (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () (0.) (0.98) (0.98) 30 (1.18) 30 (1.18) 30 (1.18) (1.7) (1.7) (1.97) (.17) U 7.0 (0.7) 1.0 (0.) 11. (0.) 1.0 (0.) 1.0 (0.) 1.0 (0.).0 (0.79).0 (0.79) 7.0 (1.06) 31.0 (1.) X.7 (0.18) 6. (0.) 7.7 (0.30) 9.7 (0.38) 17.6 (0.69) 17.6 (0.69) 1.6 (0.8) 1.6 (0.8) 7.6 (1.08) 31.6 (1.) Z 9.7 (0.38) 11. (0.) (0.) 19 (0.7) (0.87) (0.87) 7 (1.06) 7 (1.06) 38 (1.). (1.7) (0.) 6.0 (0.) 6.0 (0.) 8.0 (0.31) 1.0 (0.) 1.0 (0.) 18.0 (0.71) 18.0 (0.71) 1.0 (0.83) 1.0 (0.83) 1. (0.8) 3.0 (1.6) 3.0 (1.3) 1.0 (1.61).0 (1.6).0 (1.6) 6.0 (.) 6.0 (.) 71.0 (.) 79.0 (3.11) 6.3 (0.).0 (0.7).3 (0.1).8 (0.).0 (0.7).0 (0.7).0 (0.).0 (0.) 1.0 (0.83).0 (0.9) od Clevis 1 U Note: Pin diameter will be inch size for items with inch thread and size for items with metric thread. X P Z Ø PIN E (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () To order a od Clevis use the Prefix C followed by the thread size. Example: For a bore cylinder the metric threads are 18 x 1.. The od Clevis Part Number is C18x1. For #8-3 size, follow with or for bore. Example: C-8-3- (0.) 1 (0.83) (0.98) 30 (1.18) 30 (1.18) 30 (1.18) (1.7) (1.7) (1.97) (.17) U X 7.0 (0.7).3 (0.1).0 (0.39) 6.6 (0.6) 11. (0.) 8.3 (0.33) 1.0 (0.).3 (0.1) 1.0 (0.) 18. (0.7) 1.0 (0.) 18. (0.7).0 (0.79). (0.88).0 (0.79). (0.88) 7.0 (1.06) 8. (1.) 31.0 (1.) 3. (1.8) Z (0.39) (0.7) (0.) (0.78) 36.6 (1.) 36.6 (1.). (1.7). (1.7).6 (.19). (.) 3 P E 1 (0.) (0.39) (0.) (0.7) 1 (0.83) (0.) (0.98) (0.78) 1 (1.61) (0.87) 1 (1.61) (0.87) (1.97) 8 (1.) (1.97) 8 (1.) 6. (.6) 38 (1.) 70.6 (.78) (1.73) Ø Hole, Ø Pin Nominal.187 or.187 or.3 or 8.37 or.37 or.37 or.0 or 1.0 or 1.7 or or (0.) 6.0 (0.) 6.0 (0.) 8.0 (0.31).0 (0.).0 (0.).0 (0.79).0 (0.79) 3.0 (0.91).0 (0.9) Threads #8-3 or x 0.8 #8-3 or 6 x 1.0 #-3 or 8 x 1. 1/-8 or x 1. /- or 1 x 1. 3/8- or 1 x 1. 1/- or 18 x 1. 1/- or 18 x 1. /8-18 or x 1. 3/- or 6 x (0.8) 8.0 (1.) 3.0 (1.3) 1.0 (1.61).0 (1.6).0 (1.6) 6.0 (.) 6.0 (.) 71.0 (.) 79.0 (3.11) 6.3 (0.).0 (0.7).3 (0.1).8 (0.).0 (0.7).0 (0.7).0 (0.).0 (0.) 1.0 (0.83).0 (0.9) 8 Female Cordsets for uick Disconnect Sensors Sensor Pigtail 3 (1.3) 8. (.33) 1, or eter Cable 3 (1.6) 9.8 (.39) lack ale Connector on Sensor lue () rown (+) Cordset Description 1 eter, 3 Pin eters, 3- Pin eters, 3- Pin rown lack Part No. CFC-1 CFC- CFC- Female Connector on Cordset lue Page

37 NE ow Profi le Sensors for agnetic Piston Cylinders 3/8" & 1/" Dovetail Sensors Encased in a plastic housing, dovetail style sensors are corrosion resistant. 60 wire outlet allows close mounting. Sensors are mounted in dovetail slots in the wall of the cylinder and are actuated by a magnetic piston. agnetic pistons are specifi ed with ody Code "D" in the lobal Series Cylinder model number. Two types of sensors are offered: eed Switches and Electronic Sensors. Sensors must be ordered separately from the tables below. Each sensor is furnished complete with a set screw for secure installation. ounting clamp included with 99-0-xxx models for 3/8" dovetail. Installation for 3/8" Dovetail Sensors 1 3 Ordering uide 3/8" Dovetail Sensor (eed Switch shown) 1 Insert the mounting clamp into one of the dovetail slots and slide it to the approximate location desired. Position the sensor with its set screw facing the mounting clamp. Sensor Type eed (No ED) eed (ED) Electronic (ED) Electronic (ED) These models are NOT polarity protected. e sure to follow hook up instructions Electrical Characteristics 0-1 VDC/VC, 0. mp ax current, att ax, 0 Voltage Drop -1 VDC/VC, 0.03 mp ax current, att ax,.0 Voltage Drop Sourcing PNP 6- VDC, 0. mp ax current, 0. Voltage Drop Sinking NPN 6- VDC, 0. mp ax current, 0. Voltage Drop Set screw should be fl ush with the top surface of sensor. Push the sensor into its mounting clamp. Slide this assembly to the point of desired actuation. 3 Tighten the set screw to lock sensor in place.. ire eads 3 3 Prewired 9 ft. Part No uick Disconnect Part No.* /" Dovetail eed (No ED) eed (ED) Electronic (ED) Electronic (ED) 0-1 VDC/VC, 0. mp ax current, att ax, 0 Voltage Drop -1 VDC/VC, 0.03 mp ax current, att ax,.0 Voltage Drop Sourcing PNP 6- VDC, 0. mp ax current, 0. Voltage Drop Sinking NPN 6- VDC, 0. mp ax current, 0. Voltage Drop ound Profile Sensors Ordering uide ound Profile Sensors feature surge supression, polarity protection, ED indicator, and extremely fast switching speeds. These slide into mating keyhole slots adjacent to the cylinder port, and are easily positioned and locked in place with a set screw. ll round profile sensors feature surge supression, polarity protection, ED indicator, and extremely fast switching speeds. Sensor Type eed Switch for PC's w/ed (current limiting) Electronic ED and Sourcing Electronic ED and SInking ED Indicator ound Profile Sensors Electrical Characteristics Function Switching Switching Switching Switching Voltage Current Power Speed SPST Normally Open PNP Normally Open NPN Normally Open -1V C/DC /60 Hz 6-30 VDC 6-30 VDC 0.0 mp max 0.00 mp min. 0. mp max. 0. mp max. atts max. 6 atts max. 6 atts max. ø ms operate 0.1 ms release 1.µs operate 0.µs release 1.µs operate 0.µs release 13.0 to center of Sensing rea for eed Style 7.0 to center of Sensing rea for Electronic Style ED Indicator. eed Style.8 Electronic Style Voltage Drop. Volts 1. Volts 1. Volts 6 in. 8 ale uick Disconnect * Prewired 9 ft. Part No. 9C C C ft. Part Numbers uick Disconnect Part No.* 9C equires 3 pin cordset 9C equires 3 pin cordset 9C equires 3 pin cordset Note*: uick Disconnect styles are supplied with 6 inch pigtail with male connector. Order female cordsets separately. See page 36. Temperature ange for Sensors - to + C (- to +176 F) rown (DC +) (DC ) lue rown (DC +) (DC ) lue rown VDC lack lue (+) () OD rown VDC lack lue (+) () OD eed Switch without ED eed Switch with ED Electronic Sensor Sourcing Electronic Sensor Sinking Page 37

38 lobal Series Cylinders Ø - Ø s Standard Features Chrome plated, stainless steel guide shafts with Duralon linear bearings tapped mounting holes on toolplate clearance holes (all sizes except 0) models requiring screw head clearance are c'bored as pictured bore holes tapped at rear - bores holes c'bored and tapped at rear nodized aluminum toolplate 3 styles available: lank etric Inch lobal Series cylinder body Ø3 - Ø s Standard Features Chrome plated, stainless steel guide shafts with Duralon linear bearings clearance holes models requiring screw head clearance are c'bored as pictured tapped mounting holes on toolplate nodized aluminum toolplate 3 styles available: lank etric Inch lobal Series cylinder body 3 - bores clearance holes thru, c'bored each end, tapped each end Page

39 T Series Double cting, uided Toolplate odels How to Order T lobal Series uided Toolplate N without magnetic piston D with magnetic piston Sensors & cables must be ordered separately. Please see page thru 1 See data chart below for available standard strokes T odel Number Series Port ody Stroke Options N NPT ports and inch mounting holes in toolplate & cylinder SP Parallel ports and metric mounting holes in toolplate & cylinder P SPT taper ports and metric mounting holes in toolplate & cylinder bore sizes: 0 thru umpers V Viton Seals T1 lank toolplate ODEIN EXPES TND 0 0 V uided toolplate, NPT ports, inch mounting holes in toolplate and cylinder, magnetic piston, bore, stroke, Viton seals. (Sensors must be ordered separately. See page 37.) TN 0 0 uided toolplate, SP Parallel ports, metric mounting holes in toolplate and cylinder, bore, stroke, no options. Engineering Data See page 8 for additional specifi cations (.) (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () 3. (7.8).99 (11) 7.7 (17) 8.17 (18).90 () 11. (6) (1/) (/8) (3/) (1) 3 (1-1/) (1-1/) () (-1/) (3-1/) () (1.7).36 (.). (.) 3.1 (7.) 3.68 (8.1) 8. (19). (3).3 (). (9) aximum llowable oad at Toolplate g. (bs) Standard vailable Cylinder Strokes (inch) (.39) 1 (.9) (.79) (.98).7 (6) 1.36 (3) 1.1 (.) 0.9 (.1).09 (9).13 (.7) 1.86 (.1) 1. (3.) 7.6 ().99 (11).09 (9) 3.18 (7) 7.9 (.). ().77 (.).09 (9) 9.08 () 7.0 (1.) 6.13 (13.).99 (11) 9.99 () 7.7 (17) 6. (1.).31 (11.7) 1.66 (3.) 1.07 (31).71 (8) 11.3 (). (6).70 () 1.11 (6.) 17. (38) 38.9 (8) 3.8 (78.9) 33.1 (73) (68).00 (9.) 38.9 (8) 3.87 (79) (7) aximum llowable oad at Toolplate g. (bs) Standard vailable Cylinder Strokes (inch) (1.77).7 ().36 (.) 3.7 (7.) 3. (7.8) 7.6 () 8.8 (19.). (37) (39) (1.97) 0. (1.1) 0.77 (1.7).09 (.6).18 (.8) 3.0 (6.7) 3. (7.1).90 (13) 8. (18.) 1.98 (33) 1.89 (3) 7 (.9) 0.1 (0.9) 0.6 (1.) 1.3 (.7) 1.3 (.9). (.). (.8).81 (.6) 6. (1.6).08 (6.6) (9) (3.9) 0.3 (0.7) 0.1 (0.9) 0.77 (1.7) 0.86 (1.9) 1.91 (.).09 (.6).13 (9.1).9 (.1).6 (.6) (.6) (1.18) 0.86 (1.9) 1.3 (.9).81 (6.) 3.1 (7.). ().81 (.6). (3) 1.98 (33) 8.60 () (69) 1 (.9) 0.73 (1.6) 0.86 (1.9) 1.36 (3).0 (.) 3.81 (8.).13 (9.1) 3 (1.38).9 (.7).7 (6) 3. (8) 3.90 (8.6) 9.99 () (9) 6.79 (9) 9.1 (6) 1 (.91) 0.1 (0.9) 0. (1.) 1.0 (.3) 1.1 (3.1). (.8).86 (6.3) Page 39

40 lobal Series Cylinders Ø Ø s Standard Toolplate will be provided when 'N' port code is specified. will be provided when '' or 'P' port code is specified. 'S' Thru Hole 'U' Dia. C' by 'Y' Deep Places From Other Side Sensors for magnetic piston position indication must be ordered separately. See page 37. FF F C 'J' Tapped Thru Places Dimensional Data FF F C Toolplate & ounting Inch Dimensions Specified by Port Code 'N' C F FF J OT /- 1/- T S U.8 Y.06 Toolplate & ounting etric Dimensions () Specified by Port Code '' or 'P' C 8 3 F FF J 3 x 0. x 0.7 x 0.7 x 0.7 OT x 0.7 x x x 1.0 T S U Y ' ' Dimensions by and Stroke for both Standard & agnetic Piston shown as (inches) 33.0 (1.30) 3. (1.) 36. (1.) 37. (1.8) 38.0 (1.). (1.9) 1. (1.). (1.67) (1.69). (1.79) 6. (1.83) 7. (1.87) 8.0 (1.89). (1.99) 1. (.03). (.07) Stroke 3.0 (.07). (.19) 6. (.) 7. (.6) (.8) 60. (.38) 61. (.) 6. (.6) (.6) 67. (.66) 71. (.81) 7. (.8) 76. (3.01) 77. (3.0) Page --06

41 T Series uided Toolplate odels Dimensions Cylinder ody Tapped Hole ounting * Port Size Offerings Duralon earings T 'OT' Threads This End Only will be provided when 'N' port code is specified. will be provided when '' or 'P' port code is specified. Note: x 0.8 port will accept #-3 male thread fi ttings lank Toolplate Use Option Code T1 to specify a blank toolplate shown below. T *E I Dia. C C * Note: See page for additional cylinder body angle and profi le dimensions. P Places 'O' C' 'OT' Tapped ounting Hole x 'T' Deep Places Chart Dimensions shown as (inches) 6 (0.36) 8 (0.31) (0.39) (0.7).8 (0.188) (0.197) 6 (0.36) 6 (0.36) (0.98) 9 (1.1) 36 (1.) (1.7) E 3 (0.90) 7. (1.07) 31. (1.3) 36.9 (1.) I 31. (1.) 37.1 (1.6) 7 (1.8) 1.3 (.0) 3. (0.1) 3. (0.1). (0.18) (0.) (0.87) 8 (1.) 36 (1.) (1.7) O 6. x 3. dp (0.6 x 0.1 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) *P x0.8 x0.8 x0.8 x0.8 T 6.1 (.) 6.1 (.) 6.9 (.7) 8.3 (.33) Port ocation by & Stroke 83.8 (3.30) 86. (3.39) 81. (3.1) 8. (3.) (.8) 111. (.38) 1.6 (.9). (.8) (.7) 136. (.36) 11.6 (.7) 17. (.81) 7.0 (0.8) (0.3) 8. (0.33) 8.9 (0.3). (0.) 8.1 (0.3) 8. (0.33) Stroke (0.3). (0.).1 (0.8).7 (0.) 8.9 (0.3). (0.).1 (0.8).7 (0.) --06 Page 1

42 lobal Series Cylinders Ø3 Ø s Standard Toolplate Inch threads will be provided when 'N' port code is specified. etric threads will be provided when '' or 'P' port code is specified. 'S' Thru Hole, 'U' Dia. C' x 'Y' Deep Places from Other Side 'J ' Tapped Thru Places lank Toolplate Use Option Code T1 to specify a blank toolplate shown below. FF F C C FF F C C Dimensional Data 3 Toolplate & ounting Inch Dimensions Specified by Port Code 'N' C F FF J - 1/- /-18 7/-1 1/-13 1/-13 OT 1/- 1/- /-18 7/-1 1/-13 1/-13 T S U Y Toolplate & ounting etric Dimensions () Specified by Port Code '' or 'P' 3 C F FF J x 0.8 6x1.0 8x1. x1. x1.7 x1.7 OT 6x1.0 6x1.0 8x1. x1. x1.7 x1.7 T S U Y St'd Piston ag. Piston St'd Piston ag. Piston St'd Piston ag. Piston St'd Piston ag. Piston St'd Piston ag. Piston St'd Piston ag. Piston 8.0 (1.) 38.0 (1.) 3. (1.36). (1.7) ' ' Dimension by & Stroke shown as (inches) 33.0 (1.30) 3.0 (1.69) 39. (1.6) 9. (1.9). (1.9). (1.99) 6.0 (1.81) 6.0 (.) 3. (.11). (.).0 (.8) 73.0 (.87) (1.) 8.0 (1.89). (1.7). (.1). (1.79). (.19) 1.0 (.01) 61.0 (.) 8. (.30) 68. (.70) 68.0 (.68) 78.0 (3.07) 3.0 (1.69) 3.0 (.09) 9. (1.9) 9. (.3). (1.99) 60. (.38) 6.0 (.) 66.0 (.60). (.) 73. (.89) 73.0 (.87) 83.0 (3.7) Stroke 8.0 (1.89) 8.0 (.8). (.1) 6. (.). (.19) 6. (.8) 61.0 (.) 71.0 (.) 68. (.70) 78. (3.09) 78.0 (3.07) 88.0 (3.6) (.09).0 (.8) 9. (.3) 69. (.7) 60. (.38) 70. (.78) 66.0 (.60) 76.0 (.99) 73. (.89) 83. (3.9) 83.0 (3.7) 93.0 (3.66) (.8) 68.0 (.68) 6. (.) 7. (.93) 6. (.8) 7. (.97) 71.0 (.) 81.0 (3.19) 78. (3.09) 88. (3.8) 88.0 (3.6) 98.0 (3.86).0 (.8) 73.0 (.87) 69. (.7) 79. (3.13) 70. (.78). (3.17) 76.0 (.99) 86.0 (3.39) 83. (3.9) 93. (3.68) 93.0 (3.66) 3.0 (.06) 68.0 (.68) 78.0 (3.07) 7. (.93) 8. (3.33) 7. (.97) 8. (3.37) 81.0 (3.19) 91.0 (3.8) 88. (3.8) 98. (3.88) 98.0 (3.86) 8.0 (.) Page -8-0

43 T Series uided Toolplate odels Dimensions Cylinder ody Tapped Hole ounting * Port Size Offerings - See dimension column P below T T 'OT' Threads oth Ends will be provided when 'N' port code is specified. will be provided when '' or 'P' port code is specified. N NPT ports, inch toolplate & mounting threads SP parallel ports, metric toolplate & mounting threads P SPT taper ports, metric toolplate & mounting threads Note: On 3 bore, stroke, non-magnetic model only, port thread is x0.8 which will accept #-3 male thread fi ttings. Ø3 Ø s 'N' Thru Hole & 'O' C' for SHCS Places From Each End 'OT' Tapped ounting Hole x 'T' Deep Places From Each End I Dia. P Places Z T Slots () for round profile sensors. See page (0.0) (0.0) (0.787) (0.787) (0.98) 30 (1.181) 7 (0.76) 7 (0.76) 8 (0.31) 11.1 (0.38) (0.0) (0.0). (1.7) (.0).7 (.1) 76.7 (3.0) 97.8 (3.8) 11.3 (.) Chart Dimensions shown as (inches) I 8.9 (.3) 69 (.7) 8.9 (3.3) 1.8 (.01) 9.8 (.11) 13.9 (6.06) 7 (0.8) 7 (0.8) (0.39) (0.7) 3 (1.3) (1.7) (1.97) 60 (.36) 77 (3.03) 9 (3.70) N. (0.). (0.) 6.6 (0.6) 9 (0.3) 11 (0.3) 11 (0.3) O 9.0 x 7.0 dp (0.3 x 0.8 dp) 9.0 x 7.0 dp (0.3 x 0.8 dp) 11.0 x 8.0 dp (0.3 x 0.31 dp) 13.7 x. dp (0. x 0.1 dp).8 x 13. dp (0.66 x 0.3 dp).8 x 13. dp (0.66 x 0.3 dp) *P 1/8* 1/8* 1/* 1/* 3/8* 3/8* T 8.3 (0.33) 8.3 (0.33).1 (0.8). (0.9) 1.0 (0.) 1.0 (0.) 9.3 (1.9) 7.0 (.) 70.6 (.78) 83.6 (3.9) (.09) 1.9 (.) Z. (0.6) 17.8 (0.70). (0.88). (0.88) 7.0 (1.06) 7.0 (1.06) ' ' Dimension by & Stroke shown as (inches) Stroke 3 St'd Piston ag. Piston St'd Piston ag. Piston St'd Piston ag. Piston St'd Piston ag. Piston St'd Piston ag. Piston St'd Piston ag. Piston 73.0 (.87) 83.0 (3.7) 79. (3.13) 89. (3.). (3.17) 90. (3.6) 86.0 (3.39) 96.0 (3.78) 93. (3.68) 3. (.07) 3.0 (.06) (.) (.) 8.0 (.) 11. (.1) 11. (.1) 11. (.) 11. (.) 1.0 (.76) 1.0 (.76) 8. (.06) 8. (.06) (.3) (.3) (.) (.) 139. (.9) 139. (.9) 1. (.3) 1. (.3) 16.0 (.7) 16.0 (.7) 13. (6.0) 13. (6.0) 3.0 (6.) 3.0 (6.) (6.) 17.8 (6.) 1. (7.11) 1. (7.11) 18.3 (7.6) 18.3 (7.6) (7.6) (7.6) 19. (7.66) 19. (7.66) 1.7 (7.9) 1.7 (7.9) (7.79) (7.79). (8.09). (8.09) 9.3 (8.) 9.3 (8.) 1.6 (8.9) 1.6 (8.9) 19. (8.6) 19. (8.6) 6.7 (8.93) 6.7 (8.93) Port ocation by & Stroke Stroke (0.3) 9. (0.36). (0.1) 11. (0.) 1.0 (0.) 18.0 (0.71) 1, 1.7 (0.).7 (0.) 13. (0.) 18. (0.73) 1.0 (0.) 18.0 (0.71) Page 3

44 N NPT ports, inch rod thread SP Parallel ports, metric rod thread P SPT taper ports, metric rod thread lobal Series ist Prices Effective January 11, lobal Series N without magnetic piston (std) D with magnetic piston (adder) See sensors, cables and accessory prices on page 7 How to Order D double acting S single acting, spring retract 0 thru 0 bore only T single acting, spring extend 0 thru 0 bore only Series Port ody odel ounting Stroke ction Options S single rod (standard) double rod T double rod hole thru non-rotating single rod non-rotating double rod non-rotating double rod hole thru adjustable stroke extend (includes ounting Code tapped holes) thru hole (standard) foot mount E fl ange rod end F fl ange cap end ISO flange rod end H ISO flange cap end C rear clevis tapped both ends See prices on page bumpers, both ends male rod, rod end N male rod, cap end P male rod, both ends E boss, rod end F boss, cap end S adjustable stroke, retract V high temperature seals 3 Stroke D ction Code (ase Price) S T T N/ odel Code N/ dd on Prices agnet Piston Code D N/ N/ N/ N/ or N P Option Code E or F S N/C N/ N/C N/ N/C 1. N/C 1.70 N/C 6. V XC XC11 XC Page

45 NNPT ports, inch rod thread SP Parallel ports, metric rod thread PSPT taper ports, metric rod thread N without magnetic piston (std) D with magnetic piston (adder) See sensors, cables and accessory prices on page 7 How to Order Series Port ody odel ounting Stroke ction Options D double acting S single acting, spring retract 0 thru 0 bore only T single acting, spring extend 0 thru 0 bore only lobal Series Stroke ction Code (ase Price) D S S single rod (standard) double rod T double rod hole thru non-rotating single rod non-rotating double rod non-rotating double rod hole thru adjustable stroke extend (includes ounting Code tapped holes) T T thru hole (standard) foot mount E fl ange rod end F fl ange cap end ISO flange rod end H ISO flange cap end C rear clevis tapped both ends See prices on page 7 odel Code dd on Prices agnet Piston Code D or N bumpers, both ends male rod, rod end N male rod, cap end P male rod, both ends E boss, rod end F boss, cap end S adjustable stroke, retract V high temperature seals XC back-to-back XC11, XC tandem Option Code XC11 P E or F S V XC XC N/C N/C N/C N/C N/C Page

46 lobal Series ist Prices Effective January 11, T odel Number T lobal Series uided Toolplate Series Port N without magnetic piston (std) D with magnetic piston (adder) See sensors, cables and accessory prices on page 7 ody Stroke Options N NPT ports, inch threads toolplate & mounting SP Parallel ports, metric threads toolplate & mounting P SPT taper ports, metric threads toolplate & mounting umpers V Viton Seals T1 lank toolplate Stroke Page 6 ase Price agnetic Piston D dd on Prices Option Codes umpers Viton Seals V lank Toolplate T N/C N/C N/C N/C 3 Stroke ase Price agnetic Piston D dd on Prices Option Codes umpers Viton Seals V lank Toolplate T N/C N/C N/C Stroke ase Price agnetic Piston D dd on Prices Option Codes umpers Viton Seals V lank Toolplate T N/C N/C N/C

47 ounting Codes, ccessories, & Sensors ounting Code dders and ccessory Prices 3 ounting Code Price dders Std. Std. Std. Std. Std. Std. Std. Std. Std. Std., E, F, or H $ C $ $ ccessory Prices Part No. [ Use E or C in box ( ) ] 83 or x or 6 x 1 3 or 8 x 1. 1/8 or x 1. /- or 1 x 1. 3/8 or 1 x 1. 1/ or 18 x 1. 1/ or 18 x 1. /818 or x 1. 3/ or 6 x 1. od Eye $ od Clevis $ Dovetail agnetic Sensors 3/8 Dovetail 1/ Dovetail Sensor Type eed (No ED) eed (ED) Electronic (ED) Electronic (ED) eed (No ED) eed (ED) Electronic (ED) Electronic (ED) Electrical Characteristics 0-1 VDC/VC, 0. mp ax, att ax, 0 Voltage Drop -1 VDC/VC, 0.03 mp ax, att ax,.0 Voltage Drop Sourcing PNP 6- VDC, 0. mp ax, 0. Voltage Drop Sinking NPN 6- VDC, 0. mp ax, 0. Voltage Drop 0-1 VDC/VC, 0. mp ax, att ax, 0 Voltage Drop -1 VDC/VC, 0.03 mp ax, att ax,.0 Voltage Drop Sourcing PNP 6- VDC, 0. mp ax, 0. Voltage Drop Sinking NPN 6- VDC, 0. mp ax, 0. Voltage Drop ire eads Prewired 9 ft. Part No. Price $ $ uick Disconnect Part No. Price $ $ ound Profile agnetic Sensors These fi t into the keyhole slots adjacent to the cylinder ports of the new extrusion shown on pages 1, 3,, 7 9, & 3. The sensors feature surge suppression, polarity protection, ED indicator and extremely fast switching speeds. agnetic Sensors Electrical Characteristics Sensor Type Switching Function Voltage eed Switch for PC s w/ed (current limiting) Electronic ED and Sourcing Electronic ED and SInking SPST Normally Open PNP Normally Open NPN Normally Open Normally Open -1V C/DC /60 Hz 6-30 VDC 6-30 VDC Switching Current 0.0 mp max 0.00 mp min. 0. mp max. 0. mp max. Switching Power atts max. 6 atts max. 6 atts max. Switching Speed 0. ms operate 0.1 ms release 1.µs operate 0.µs release 1.µs operate 0.µs release Voltage Drop. Volts 1. Volts 1. Volts Part Numbers and Prices Prewired 9 ft. Price Part No. uick Disconnect 9C C C $ C equires 3 pin cordset 9C equires 3 pin cordset 9C equires 3 pin cordset Price $ Female Cordsets Cordset Description 1 meter length, 3 Pin meters length, 3 Pin meters length, 3 Pin Part No. CFC-1 CFC- CFC- ist Prices $ Seal its Seal it Price Non-rotating Seal Price Seal it Price Non-rotating Seal Price -S $.0 -DDS6V $9. -S $.70 3-DDSV $ SV SV 9. -S.1 -DDS8V. -S 7. -DDSV 1. -SV. -SV.70 -S. -DDSV.70 -S DDSV 1. -SV. -SV 13. -S. -DDSV S.1 -DDSV SV. -SV. 3 3-S.8 3-DDSV S.9 -DDS SV.70 -SV Page 7

48 -09 FCO-I, Inc. 37 N.E. 9 th venue ainesville, F Telephone (3) Fax (3) 37- E-ail service@fabco-air.com eb Site Fabco-ir Product Catalog ibrary Cylinders, Valves and ccessories Catalog #CV9 Pancake II ir Cylinders Catalog Pan- Square Pancake II ir Cylinders Catalog # SqPan ISO 1 Cylinders Catalog # F-09 Twinod od, Non-otating otatingir Cylinders - Catalog # FDF-09 and Catalog # FDXS-09 ulti-power ir Presses Catalog # FP inear Slides - 6 Families Catalog # S-03 Pneumatic rippers, Parallel Jaw and ngular otion - Catalog # -8 Pneumatic ngular rippers Catalog # F-09 ISO Cylinders Catalog # FE-09 NFP Interchangeable ir Cylinders - Catalog # NF-6 Stainless Steel ody ir Cylinders Catalog SS-03 Swing Clamps ulletin # SC-D0 anifold Solenoid Valves Catalog # FVS.Y-09 ir Pilot & Solenoid Valves Catalog # FV.E-09 odularir Preparation System - Fs Catalog # F-06 Stopper Cylinders Catalog # ST-SC Swing Clamps, Pneumatic & Hydraulic Catalog # F.H uided otion ir Cylinders Catalog # F- ir Slide Tables Catalog # FXS-