M0 2-7 Electric chain hoists. M Jib cranes trolley for chain hoists. M Modular system for monorails and bridge cranes

Transcription

1 LIFTING ND HNDLING YTE Electric chain hoists Jib cranes trolley for chain hoists odular syste for onorails and bridge cranes Vacuhandling vacuu lifters 4 38 Pneuatic chain hoists 5 39 anual chain hoists alancers L Lifting equipents Lifting agnets and lifting sling bars Pallet trucks and hydraulic lifters.1

2 Up to 60% ore of capacity GP 250/1 up to 400 kg GP 250/2 up to 630 kg GP 500/1 up to 800 kg GP 500/2 up to 1250 kg GP 1000/1 up to 1600 kg GP 1000/2 up to 2500 kg Ring connections NEW GI HOIT ELETRI HIN HOIT - IP65 - GP ITE: 0005 High perforance electric chain hoist with an high quality chain thanks to the high standard of FE. - Electroechancal drive - hain with safety drive factor "8" - Die-cast aluinu structure and tepered steel wheel - Polygon otor shaft coupling with Trefoil - Low voltage coands (42V) - The brake does not require adjustent, eergency overload device included - Three.phase feed 380V 50Hz - uitable for an high nuber of operations - Indicated for external enviorents IP65 protection - Usuable between -15 and Rewinding chain syste 02 Load capacity odel FE L IO PEED /in NR. HIN ETION /in. HOOK RUN NF 1.552,00 GP250/1NF / NF , GP250/1NF F ,00 GP250/1F 2 16/ NF ,00 GP250/1NF 8/ F 2.215,00 GP500/1F 16/ NF ,00 GP250/1NF 2 8/ NF 2.023, GP250/2NF 4 4/ F 2.215,00 GP500/1F 16/ NF 2.053,00 GP250/2NF 2 4/ NF 2.542, GP500/1NF 8/ NF ,00 4 GP500/2NF 4/ NF 2.350, NF 2.921,00 GP1000/1NF 8/ NF 2.921, NF 3.153, NF 3.153, GP1000/2NF 2 4/ NF 3.153, Hook latch available upon request. IP65 protections.2.3

3 ELETRI HIN HOIT - HNDY ITE: 0012 High perforance electric chain hoist thanks to the high standard of FE. Equipped with a supportive ergonoic coand for loading the hook. - Electroechanical drive - hain with safety factor "8" - Die cast aluinu structure and tepered steel wheel - Polygon otor shaft coupling with trefoil - Low voltage coands (42V) - The brake does not require adjustent, eergency overload included - Three-phase feed 380V 50 Hz - uitable for an high nuber of operations - Indicated for external enviorents IP65 protection - Usable between 15 and Rewinding chain syste 02 Load capacity odel L FE IO PEED /in HIN ETION HOOK RUN ,00 80 GPH250/1F 16/ ,00 GPH250/1NF 8/ ,00 GPH500/1F 16/ ,00 GPH250/1NF 3 8/ ,00 GPH500/1F 16/ ,00 GPH500/1NF 8/ ,00 GPH500/1F 16/ , GPH500/1NF 2 8/2 ELETRI HIN HOIT - IP65 - H ITE: 0015 High perforance electric chain hoist thanks to the high standard of FE. - Elecroechanical chain drive - hain with safety factor "8" - Die cast aluinu structured and tepered steel wheel - Low voltage coands (42V) - Polygon otor shaft coupling with trefoil - The brake does not require adjustent, erergency overload device included - Three-phase feed 380V 50Hz - uitable for an high nuber of operations IP65 protection - Indicated for external enviorents - Usable between -15 and Rewinding chain - Instruction anual of use and ainteance 02 Load capacity odel FE L IO PEED /in NR. ETION HOOK RUN , H125/1NF , H200/1NF 14 8/ , H250/1NF ,00 H500/1NF ,00 H500/2NF 25 4/ , H1000/2NF 28 PEIL ELETRI HIN HOIT Hoist TEX for explosion proof enviroents teel hoist for the food arket Hoist GPK for low hieghts Hoist GP double all synchronous lift Hoist GPHT with telescopic stand and control panel on the hook.4.5

4 TROLLEY FOR JI RNE ITE: 1450 Push traversing otion trolleys for jib cranes. - For Gis ring hoist GP, GP and H with suspension ring - Four steel wheels set ounted on ball bearings - ast iron casing - Equipped with anti-ipact and anti-derailent safety syste - uitable for an high nuber of operations thanks to the high standard of FE - Useable between - 15 and Pivot Gis hoist pairing - Instruction anual of use and ainteance /1 134,00 Load capacity odel Trench Z /2 152, up to 500 GHF500K /3 159, /4 166, /4 204, /1 294, up to 1000 EHF /2 303, /3 318, /1 323, /2 451, up to 2000 EHF /3 476, /4 489, HOIT PUH-UTTON WITHE ITE: 0910 Two speed push button for electric hoists - Eergency stop button - Protection IP65 - Tear ring save 02 odel Nuber of buttons uitable for hoist ,00 GHP GH - GP ITE: 0920 Two speed push button for electric hoists. - Eergency stop button - Protection IP65 - Tear ring save 02 odel Nuber of buttons uitable for hoist ,00 510/FE H ITE: 0930 Two speed bush button for electric hoists. - Eergency stop button - Protection IP65 - Tear ring save 02 odel Nuber of buttons uitable for hoist ,00 XP GH - GP - H otorized odels available on request. ITE: 0950 Two speed push button for electric hoists. - Eergency stop button - Protection IP65 - Tear ring save 02 odel Nuber of buttons uitable for hoist ,00 515/FE GH - GP - EFE ITE: 0960 Two speed radio push button for electric hoists. - Eergency stop button - Protection IP65 - Receiving radio 02 odel Nuber of buttons uitable for hoist 0960RDIO 990,00 RDIO GH - GP.6.7

5 OLUN-OUNTED JI RNE OLUN OUNTED JI RNE WITH GI K R ITE: 1250 olun crane, TER odel, with GI K ar pro le syste. - Pro le cold-rolled not bent before welding - rakes operated by cap springs - wear resistant - Finishing a coat of anti-rust, two coats of water-soluble paint, not suitable for external enviroents which are particular huid - axiu soothness guaranteed by the quality of the pro le - axiu rigidity garanteed by the geoetry of the colun - Rotation of the ar up to 270 upplied with. - Hoist trolley - Power supply syste with at cable and cable box trolleys - Instruction anual for assebly, use and aintenance 02 LOD PITY ODEL TRDDLE EXTERNL HOOK POITION F ,00 200/3000 TER , /4000 TER ,00 200/5000 TER ,00 200/3000 TER , /4000 TER ,00 200/5000 TER ,00 500/4000 TER ,00 500/5000 TER , /4000 TER , /5000 TER G Q D FOUNDTION TYPE EXTENION TYPE TIE ROD TRTION NUER OF TIE ROD TER 200/ Year 2013 G.. RII - Nonantola (O) ** For foundation and relative cages diensions, look at page

6 POR TT F = = OLUN-OUNTED JI RNE WITH GI YTE K PROFILE R OLUN-OUNTED JI RNE WITH GI YTE K PROFILE R ITE: 1010 olun ounted cranes odel with GI K syste ar pro le. - Pro le cold rolled not bent before welding - rakes operated by cap springs, wear resistant - olun pyraid truncated, our patent - Finishing a coat of anti-rust, two coats of water-soluble paint,, not suitable for external enviroents, which are particularly huid - axiu soothness guaranteed by the pro le - axiu rigidity guaranteed by the geoetry of the colun - Rotation of the are up to Hoist trolley - Power supply syste with at cable and cable box trolley - Three pole circuit breaker switch - Instruction anual for assebly, use and aintenance G Q Y 270 ccessories upon request: 500, 1000, 1500 extensions 02 LOD PITY ODEL TRDDLE EXTERNL HOOK POITION F G Q X HOOK HEIGHT FRO GROUND FOUNDTION TYPE EXTENION TYPE PREURE ETWEEN OLUN E ND FOUNDTION /c² NHORING TIE ROD TRTION 500 load capacity II aurizio - assina de Pecchi (I) Different versions with load capacities fro 250 a 500 DN Italia p - ontalto Lucino (O) ,00 125/ ,00 125/ ,00 125/4000 is ,00 125/ ,00 125/ ,00 125/ ,00 125/ ,00 125/ ,00 200/ ,00 200/ ,00 200/ ,00 200/ ,00 200/ ,00 200/ ,00 250/3000 is ,00 250/4000 is ,00 250/ ,00 250/ ,00 250/ ,00 250/ ,00 500/ ,00 500/ ,00 500/ ,00 500/ ,00 500/ ,00 500/ , / , / , / , / NOTE: Upon request versions featuring different load capacity ay be supplied. * ranes ay be supplied featuring lower height fro the standard. Fro the odel 125/4000 onwards the ceiling ust be 150 tallest than the G quote. ** For foundation and relative cages diensions, look at page

7 POR TT F KID-OUNTED JI RNE KID-OUNTED JI RNE ITE: 1015 olun ounted cranes with palletized base, odel P with GI K yste ar pro le. - old rolled not bent before welding - rakes operated by cap springs, wear resistant - Finishing a coat of anti-rust, two coats of water-soluble paint, not suitable for external enviroents, which are particularly huid -The pallet base stand is an Iron structure which has to be lled with ceent by the user - axiun soothness guaranteed by the pro le - axiu rigidity guaranteed by the geoetry of the colun - Thanks to the palletized base the crane can be easily oved - Rotation of the ar up to Hoist trolley - Power supply syste with at cable and cable box trolley - Three pole circuit breaker switch - Instruction anual for assebly, use and aintenance Y D G Q E H I 02 LOD PITY ODEL TRDDLE D E F G H I Q X HOOK HEIGHT FRO GROUND ,00 P125/ , P125/ ,00 P125/ ,00 P200/ , P200/ ,00 P200/ Hoist excluded ase tted ib crane P 125/ Year

8 POR TT 200 F = = OLUN-OUNTED JI RNE WITH LIFTED TIE E R ND TIE ROD OLUN OUNTED TIE ROD E JI RNE ITE: 1020 olu cranes, T odel, with a bea are. - olun pyraid truncated, our patent - rakes operated by cap springs, wear resistant - Finishing a coat of anti-rust, two coats of water-soluble paint, not suitable for external enviroents, which are particularly huid - axiu rigidity guaranteed by the geoetry of the colun - Rotation of the ar up to Electric power supply, external steel duct, and cable trolley - Three pole circuit breaker switch - Instruction anual, assebly use and aintenance z Q Y α G ccessories upon request: 500, 1000, 1500 extensions Jib crane T 1500/ Year 2013 ZNETTI GNETI - arbariga () 02 LOD PITY ODEL TRDDLE EXTERNL HOOK POITION F G ,00 T 500/ ,00 T 500/ , T 500/ ,00 T 500/ ,00 T 500/ ,00 T 1000/ ,00 T 1000/ ,00 T 1000/ ,00 T 1000/ Q X HOOK HEIGHT FRO GROUND Z FOUNDTION TYPE EXTENION TYPE PRE ETWEEN PILLR E ND FOUNDTION /c² NHORING TIE ROD TRTION * ranes with a lower than standard height can also be supplied. The ceiling ust be over 150 than the G quote. Upon request versions with different load capacities can be supplied. ** For foundation and relative cages diensions, look at page

9 POR TT F = = OLUN-OUNTED JI RNE WITH LIFTED TIE E R. OLUN OUNTED JI RNE, WITH LIFTED TIE E R ITE: 1030 olun cranes, R odel, with bea raised ar. - olun pyraid truncated, our patent - rakes operated by cap springs, wear resistant - Finishing a coat of anti-rust, two coats of water-soluble paint, not suitable for external enviroents, which are particularly huid - The bea raised are allows you to recover height space increasing the hook run - axiu rigidity guaranteed by the geoetry of the colun - Rotation of the ar up to Electric power supply, external steel duct and cable trolley - Three pole circuit breaker switch - Instruction anual of assebly, use and aintenance z 200 Q Jib crane with raised boo R 500/3000 partly separated fro lab R srl - Torre De Roveri (G) G Y X α ccessories upon request: 500, 1000, 1500 extensions Jib crane with pedestal and raised boo R 1500/4500 FHP Roncello () 02 LOD PITY ODEL TRDDLE EXTERNL HOOK POITION * ranes with a lower than standard height can also be supplied. The ceiling ust be over 150 G than the G quote. *** Height easured with loading applied to crane. Different load capacities ay be supplied upon request. F G ,00 R 250/ ,00 R 250/ , R 250/ ,00 R 250/ ,00 R 250/ ,00 R 500/ ,00 R 500/ , R 500/ ,00 R 500/ ,00 R 500/ ,00 R 1000/ ,00 R 1000/ ,00 R 1000/ ,00 R 1000/ Q X X HOOK HEIGHT FRO GROUND Trench Z FOUNDTION TYPE EXTENION TYPE PREURE ETWEEN PILLR E ND FOUNDTION /c² NHORING TIE ROD TRTION ** For foundation and relative cages diensions, look at page

10 = OLUN-OUNTED JI RNE WITH RTIULTING R OLUN OUNTED RTIULTING JI RNE ITE: 1040 olun cranes P - H odel with articulated ar od. P with eyebolt attachent, suitable for every type with hook suspension od. H with rigid sleeve attachent, can be used with GI vacuhandling VU- or Gis hoists teleskop odel - rake operated by cap springs, wear resistant - Hub of the rotating are on bearings, high quality ball bearings - Finishing a coat of anti-rust, two coats of water-soluble paint, not suitable for external enviroents, which are particularly huid - axiu rigidity guaranteed by the geoetry of the colu - axiu coverage of the area ajacent to the coluns - bility to overcoe obstacles thanks to the articulation of the ar - Electric power supply external steel duct, and cable box trolley - Three pole circuit breaker switch, only for P odel - Instruction anual of assebly, use and aintenance = = PORTT 200 R Y1 F Y H G 250 PORTT 200 = olun-ounted ib cranes with articulating ar P 125/4000 Year LTUR - ento (FE) 02 LOD PITY NOTE: Upon request different version sizes ay also be supplied. ODEL TRDDLE EXTERNL HOOK POITION F G 1040P ,00 P 125/ P ,00 P 125/ P ,00 P 200/ P ,00 P 200/ H ,00 H 125/ H ,00 H 125/ H ,00 H 200/ H ,00 H 200/ H R Y EYEOLT HEIGHT OUPLING HEIGHT Y FOUNDTION TYPE EXTENION TYPE PREURE ETWEEN PILLR E ND FOUNDTION /c² NHORING TIE ROD TRTION ** For foundation and relative cages diensions, look at page

11 = = KID-OUNTED RTIULTED R RNE KID-OUNTED RTIULTED R RNE H skid-ounted crane 80/2600 LRINT Pogliano.se (I) - Year 2012 ITE: 1045 olun ounted cranes with palletized base, PP - HP odel, with articulated ar. od. PP with eyebolt attachent, suitable for every type of hoist with hook suspension. od. HP rigid sleeved attatchent. an be used with Gis vacue handling VU - or Gis hoists teleskop odel. - rake operated by cap springs, wear resistant - Hub of the rotating ars on bearings, high quality bearings - Finishing a coat of anti-rust, two coats of water-soluble paint, not suitable for external enviroents, which are particularly huid - The pallet base stand is an Iron structure, which has to be lled with ceent by the user - axiu rigidity guaranteed by the geoetry of the colu - axiu coverage of the area ajacent to the colun - bility to overcoe obstacles thanks to the articulation of the ar - Thanks to the pallet base, the crane can be easily oved - Electri power supply, external steel duct and cable box trolley - Three pole circuit breaker switch, only PP odel - Instruction anual of assebly, use and aintenance = = POR TT 200 R G POR TT 200 Y1 F Y 250 I 02 LOD PITY ODEL TRDDLE EXTERNL HOOK POITION D 1045P ,00 PP125/ P ,00 PP125/ P ,00 PP200/ P ,00 PP/200/ H ,00 HP125/ H ,00 HP125/ H ,00 HP200/ H ,00 HP200/ E F G H I R Y Y

12 FOUNDTION PLINTH ND REINFOREENT GE FOR OLUN RNE ITE: 1220 Reinforceent cages for anchorage of the colun cranes. - upplied fully assebled and welded - Ready to be sunk in the plinth - The necessary nuts and lock nuts atching the colun The foundation plinths are calculated for an average ground pressure of 1.1kg/c². In the presence of ground with an average allowable pressure below these values, the diension of the plinth will have to be recalculated properly. Our technical departent are available for this service. REW ND HEIL FIXING PULE FOR OLUN OUNTED JI RNE ITE: 1230 Kit consisting of screws and cheical xing capsules for ounting the colun crane to Industrial ooring like reinforced concrete (iniu resistance 250 dan c³). The ver cation of eligibiliy is responsible by the user. 02 olun ib crane odel crew ø Drilling depth Hole ø * ranes featuring foundation type have a double-hole base plate, thus allowing to choose colun positioning. EXTENION FOR OLUN OUNTED RNE ITE: 1210 Feet stands needed to increase the height of the crane pillar. Features: - Progetted to atch the crane pillar odels, TER, T, R, P, e H - axiu guaranteed rigidity of nervation present on every corner edge uppled with : Equipped with colun ounting bolts , , ,00 02 FOUNDTION TYPE odel FOUNDTION GE TYPE FOUNDTION GE N Height FOUNDTION GE FOUNDTION GE P FOUNDTION GE R PLINTH H PLINTH L PLINTI L THREDING TIE ROD PLINTH /80/2000 /80/3000 /80/4000 /80/ KIT1 63,00 /125/2000 /125/3000 /125/4000 /125/4000/I /125/5000 /125/ KIT2 122,00 /125/7000 /125/8000 /200/3000 /200/3000 TER 1230KIT1 63,00 /200/4000 /200/4000 TER /200/5000 /200/5000 TER 1230KIT3 74,00 /200/ KIT4 146,00 /200/7000 /200/ KIT2 122,00 /250/ KIT1 63,00 /250/3000I /250/3000 TER 1230KIT2 122,00 /250/ KIT1 63,00 /250/4000I /250/4000 TER 1230KIT4 146,00 /250/ KIT3 74,00 /250/5000 TER /250/6000 /250/ KIT4 146,00 /250/8000 /500/3000 /500/4000 /500/4000 TER /500/ KIT5 249,00 /500/5000 TER /500/6000 P/80/2600 P/80/ KIT1 63,00 P/125/2600 P/125/4000 P/200/2600 P/200/ , Type , , Type 1a , , ,00 Type ,

13 POR TT = WLL OUNTED JI RNE WITH GI K R WLL OUNTED JI RNE WITH GI K R ITE: 1310 racket crane, odel with GI K ar pro le syste. - old rolled not bent before welding - rakes operated by cap springs, wear resistant - Finishing a coat of anti-rust, two coats of water-soluble paint, not suitable for external enviroents, which are particularly huid - axiu soothness guaranteed by the pro le - Rotation of the ar up to Hoist trolley - Power supply syste with at cable and cable box trolley - Instruction anual for assebly, use and aintenance W V T Q 500/6000 EEGI assano d dda (I) U 270 = * The aplitude of the rotation can be liited by the interference with the pillar to which it is anchored the bracket. 02 LOD PITY NOTE: Upon request cranes with several load capacities ay be supplied. ** For brackets and staybolts unit diensions, look at page. 29 ODEL TRDDLE EXTERNL HOOK POITION Q ,00 125/ ,00 125/ ,00 125/ ,00 125/ ,00 200/ ,00 200/ ,00 200/ ,00 200/ ,00 200/ ,00 200/ ,00 250/3000 is ,00 250/4000 is ,00 250/ ,00 250/ ,00 500/ ,00 500/ , / ,00 500/ ,00 500/ , / , / , / , / U V W NHORING YTE PREURE ETWEEN PILLR E ND FOUNDTION /c² NHORING TIE ROD TRTION PILLR ENDING PHE 200/7000 radio controlled crane EEGI assano d dda (I).24.25

14 POR TT = WLL OUNTED OVERHED E JI RNE WLL OUNTED OVERHED E JI RNE ITE: 1330 olun cranes, R odel with bea raised ar. - rakes operated by the cap springs, wear resistant - Finishing a coat of anti-rust, two coats of water-soluble paint, not suitable for external enviroents, which are particularly huid - The bea raised are allows you to recover height space, increasing the hook run - Rotation of the ar up to Electric power supply, external steel duct and cable box trolley - Instruction anual of assebly, use and aintenance W V z T Q U = α * R 500/ Wall-ounted ib crane with raised boo Year R srl - Torre De Roveri (G) LOD PITY * The rotation radius can be liited by the pillar itself to which is anchored the bracket. Height assessed when loaded. Upon request cranes with several load capacities ay be supplied. *** Height easured with loading applied to crane. Different load capacities ay be supplied upon request. ** For brackets and staybolts unit diensions, look at page. 29 ODEL TRDDLE EXTERNL HOOK POITION Q ,00 R 250/ ,00 R 250/ ,00 R 500/ ,00 R 500/ ,00 R 1000/ ,00 R 1000/ T U V W Trench Z NHORING YTE PREURE ETWEEN PILLR E ND FOUNDTION /c² NHORING TIE ROD TRTION PILLR ENDING PHE.26.27

15 POR TT POR TT = WLL OUNTED RTIULTING JI RNE WLL OUNTED RTIULTING JI RNE ITE: 1340 racket crane P - H odel articulated ar. od. P with threaded eye bolt coupling, suitable for every type of hoist with hook suspension. od. H with rigid sleeved attachent can be used with GI vacue handling VU- or GI hoists teleskop odel. tructural characterists: - rake operated by cap screws, wear resistant - Hub of the rotating ars on bearings, high quality bearings - Finishing a coat of anti-rust, two coats of water-soluble paint, not suitable for external enviroents, which are particularly huid vantages: - axiu coverage of the area adjacent to the colun - bility to overcoe obstacles thanks to the articulation of the ar - Electric power supply, external steel duct and cable box trolley - Instruction anual for assebly, use and aintenance = = = = W V W V F H G R = F H1 G 02 LOD PITY ** For anchoring diensions see also the chart here after provided. ODEL TRDDLE ETREE POITIONING LOD XLE F G 1340P , P 125/ P , P 200/ H , H 125/ H , H 200/ H H 1 R V W NHORING YTE PREURE ETWEEN PILLR E ND FOUNDTION /c² NHORING TIE ROD TRTION PILLR ENDING PHE / H 80/4000 Wall-ounted Jib rane oplete with Vacuhandling lifting syste LRINT Pogliano.se (I) - Year 2008 NHORING RKET ND TIE ROD KIT FOR WLL-OUNTED RNE ITE: 1410 nchoring brackets and tie rod set, coplete with bolts for wall ounting. - ade to easure to ount the cranes - odels, R, P, H - Ensures a stable secure xing syste over tie - The necessary couplings and bolts for the ounting of the crane 02 NHORING YTE KIT1 426,00 1 PILLR WIDTH () KIT2 467,00 2 fro 250 up to KIT3 561, KIT1 452, KIT2 477,00 2 fro 450 up to KIT3 636,

16 PEIL RNE FITTING - pecial gantry fastening dropper in R.. - rane anchoring syste on round pillar in R.. - laping plates on pillar in R.. - pecial lateral cheical fastening-on R...30

17 K ODULR YTE FOR ONORIL ND RIDGE RNE K PROFILED YTE ITE: 1600 GI odular syste for onofail K syste for the safe and reliable handling of suspended loads. - old rolled not bent before welding - Finishing a coat of anti-rust, two coats of water-soluble paint, not suitable for external enviroents, which are particularly huid - Hoist trolley - Power supply syste with at cable and cable box trolley - Instruction anual for assebly, use and aintenance - axiu soothness guaranteed of the quality of pro le - n outstanding pro le between weight/capacity ratio for a light-weight yet sturdy and easy to handle structure - Easy to ount thanks to the odularity of the syste - iniu noise level guaranteed by a re on coating of the sliding wheels of the trolleys ITE: 2000 K RIDGE RNE WITH HIN HOIT ridge crane syste including support structure, realized with odular eleents and high quality steel box- type pro les, cold rolled allowing an outstanding sooth running. Outstanding rigid and stable operation coplete with oscillating bridge (ball joints) so to iniize the effort related to both bridge and of hoist trolley oveents vailable load capacities: 200 and 500. Runways: - 2 ars length Gauge GI syste K I pro le - Festoon power supply,pro le built-in trolleys, front connection box units positioned along the runways - Finishing - 1 coat of anti-rust, 2 coats of water soluble paint which is not suitable for external enviroents which are particularly huid uspensions: - 6 direct suspensions 65 up to 200 bea ange - centre distance ax 3000 Overhead bridge: - ingle beaed - ax width GI syste K I pro le - Reinforceent IPE Height fro ground Festoon power supply pro le built-in trolley positioned along the bridge - anual translation of the bridge along the runways - anual hoist oveent along the bridge - Finishing - 1 coat of anti-rust, 2 coats of water soluble paint which is not suitable for external enviroents which are particularly huid tructure: - turdy solid steel structure carried out with coercial pro les - Perforated base plates, cheical capsules and tie rods ground anchoring syste bolted joint assebly - axiu height axiu width axiu length Painting of support structure with gray coating RL 7002 Electric chain hoist GI GP250: - turdy construction with cast aluiniu housing and covers - New braking syste for an iediate and precise stop of the load - djustable up and down electric liit switch- Run hook ontrol panel low voltage 42 V - upply 380 V, 3 Ph, 50 Hz 02 Load capacity Operation area Hoist PEED /s X , / x GH250/1NF X , /

18 VUU LIFTER VU- ITE: 3010 Vacue lifters, electric vacue pup to lift various types of aterial. VUU LIFTER VU- Testing roos are ade available at our preises, and branch of ces, provided with an on-going exhibition for handling and load tests. - 3 Phase pup 380V 50HZ - ellows air lift - Filter protection for the pup - 13 vacue tube - peed and lift descent with continuous regulation fro 0 to 30/in - Usefull vertical tu Roating suspension head 360 incontinuous - Fast and accurate oving loads - regulation of epty levels through a cofortable handle positioned on the control group - If there is a power- cut failure the syste holds the load, slowly taking it down to the ground in an easy controlled anner -Instruction anual 02 Load capacity Pad Drawing Description Drawing P 8.970, x 290 Vacuu lifter with single pads rectangular. oxes PD 9.400, x 315 Vacuu lifter with double pads rectangular on 500 bar PO 9.360,00 Paper bags or PV 210 x 370 Vacuu lifter with oval pads PTI , Food product 250 Vacuu lifter with round plate support in aluinu and gasket in silicone, control handles in stainless steel II PD ,00 oxes 120 x 315 Vacuu lifter with double pads rectangular on 500 bar PO ,00 Paper bags or PV 210 x 370 Vacuu lifter with oval pads PQ , Panels 120 x 315 Vacuu lifter with quadruple rectangular. The distance between the individual suction cups are ad ustable on 2 bars of 600 ounted on a bar of

19 VUJET VUU HOIT-LIFT YTE ITE: VUJET GN continuous vacuu generation syste featuring a superior suction capacity GN odel. - uction plates suitable for constant loads, large etal sheet, etal and chipboard panels - Electrically operated by three-phase pup 380V 50HZ - ross bars ade to easure to allow for the variation in the positioning of the suction points - Precise and sate handling of the loads - Possibility of handling geoetrically different details within wide diensional argins - Even in case of a power cut it holds the load being lifted thanks to the copressed air - coustic and luinous lighting safety syste. In case of error of the positioning of the suckers and loads to be lifted - Taps for exclusion on each extraction point 3025GN GN , ,00 ax capacity N of vacuu pads 2 Vacuu pads diensions 490 x VUJET VUU HOIT ITE: VUJET GH continuous vacuu generation syste featuring a superior suction capacity GH odel. - uction plates suitable for constant loads, large etal sheet, glass, etal, plastic and stone - Electrically operated by three-phase pup 380V 50HZ - ross bars ade to easure to allow for the variation in the positioning of the suction points - Precise and sate handling of the loads - Possibility of handling geoetrically different details within wide diensional argins - Even in case of a power cut it holds the load being lifted thanks to the copressed air - coustic and luinous lighting safety syste. In case of error of the positioning of the suckers and loads to be lifted - Taps for exclusion on each extraction point 3015GH GH GH , , ,00 ax capacity N of vacuu pads 4 8 Vacuu pads diaeter ITE: VUJET GHGE continuous vacuu generation syste featuring a superior suction capacity opressed air operated odel GHGE. - uction plates suitable for constant loads, large etal sheet, glass and etal - opressed air syste - ross bars ade to easure to allow for the variation in the positioning of the suction points - Precise and sate handling of the loads - Possibility of handling geoetrically different details within wide diensional argins - Even in case of a power cut it holds the load being lifted thanks to the copressed air - coustic and luinous lighting safety syste. In case of error of the positioning of the suckers and loads to be lifted - Taps for exclusion on each extraction point 3020GHGE GHGE , ,00 ax capacity N of vacuu pads 2 Vacuu pads diaeter

20 ITE: 4070 High quality perforance pneuatic chain hoist, certi cation class TEX 3GD cll 135 X. - 2 Push button ( lift and descent ) control lever - ontrol hose 2 - Die casting aluinu structure - Overloading protection device - series - Ideal for lifting operations within hazardous enviroents where sparkles, high teperatures, fues and vapours ay pose serious risks to the enviroent - Reduced air cosuption - Low noise level - uspension hook - hain collector - Instruction anual PNEUTI TEX HIN HOIT NUL HIN HOIT ITE: 6010 anual chain hoists. - trong, sturdy device - wivel hook with safety block catch - utoatic brake with double ratchet - Extra light - Instruction anual for use and aintenance 02 Load capacity Hook run Lift chain segents hain operating length H , , , , , odel ax capacity hain lifting speed at full load /in hain section ( ) n Hook run ,00 L125K , , ,00 L250K 250 9, ,00 L500K 500 4, , ,00 L1000K ITE: 4080 ea runway lift-hoist carriage, certi cation class TEX 3GD cll 135 X. - For LK ND LK hoists with hook suspension - 4 teel ounted ball bearing wheels - ast Iron case - hockproof against fall of de-railent - Ideal for lifting operations within hazardous enviroents where sparkes, high teperatures, fues and vapours which ay pose serious risks to the enviroent - Low noise level - Instruction anual TEX HND OPERTED TROLLEY Noise d() ir consuption l/s D HIN OXE FOR HIN HOIT ITE: 6015 hain hoist boxes in cloth ,00 Referred to hoist hain capacity fro 3 up to 10 TROLLEY FOR NUL HIN HOIT ITE: 6020 ea runway lift-hoist carriage. - For anual hoists with hook suspension - teel ball bearing wheels - hock-proof anti- derailent and anti-tilt device - iniu height loss - Easily adaptable to different beas - Instruction anual for use and aintenance 02 Load capacity croll bea width F ending/folding radius a b e f , , ax capacity ea width , ,9 0, , , , , ,4 ending folding radius , ,

21 PRING LNER LIGHT ERIE PRING LNER HEVY ERIE ITE: L uitable for the assebly lines - Indicated for the use of electrical and pheuatic tools - Takes away the operator's fatigue - Reduces the working tie - Iproves the quality of work - Liits the daage to tools and risks to people - Instruction anual for use and aintenance L L L L02 31,00 33,00 36,00 Load capacity Run 1600 able tainless steel ap luinu ITE: L uitable for the assebly lines - Indicated for the use of electrical and pheuatic tools and handling of ediu loads, portable welders and ultiple screw drivers - Takes away the operator's fatigue - Reduces the working tie - Iproves the quality of work - Liits the daage to tools and risks to people - Instruction anual for use and aintenance L L L L L02 249,00 249,00 264,00 264,00 Load capacity Run 2000 able tainless steel ap luinu 0 ITE: L uitable for the assebly lines - Indicated for the use of electrical and pheuatic tools ITE: L uitable for the assebly lines - Indicated for the handling of heavy pieces, portable welders and utiple screwdrivers Ø12, Ø18 >25 - Takes away the operator's fatigue - Reduces the working tie - Iproves the quality of work - Liits the daage to tools and risks to people - Takes away the operator's fatigue - Reduces the working tie - Iproves the quality of work - Liits the daage to tools and risks to people Instruction anual for use and aintenance L L L L L02 69,00 77,00 90,00 102,00 Load capacity Run 2000 able tainless steel ap luinu 8 - Instruction anual for use and aintenance L L L L L L02 424,00 436,00 467,00 511,00 547,00 Load capacity Run 2000 able tainless steel ap luinu Ø12 ITE: L uitable for the assebly lines - Indicated for the use of electrical and pheuatic tools and handling of ediu loads 9 - Takes away the operator's fatigue - Reduces the working tie - Iproves the quality of work - Liits the daage to tools and risks to people - Instruction anual for use and aintenance 10 L L L L L L02 97,00 104,00 107,00 121,00 136,00 Load capacity Run 2500 able tainless steel ap luinu.40.41

22 LIFTING LP LIFTING LP ITE: 7010 Lifting claps for handling sheet etal. ITE: 7020 Lifting claps for handling sheet etal. - ody and coponents ade of high quality steel - The extent and thickness of the lifting capacity and jaw openings engraved on the body - iniu lifting weight > 10% of the axiu ow rate - uitable for lifting and vertical transportation of sheet etal and steel structures - The security echanis ensures that it never releases the load when lifting or during transportation - Instruction anual for use and aintenance ,00 289,00 325,00 447,00 odel 0.75 T 1 TE 2 TE 4.5 TE Load capacity 750 1,000 2,000 4,500 R opening T U V W X Y Joint lifting ar with articulation - ody and coponents ade of high quality steel - The extent and thickness of the lifting capacity and jaw openings engraved on the body - iniu lifting weight > 10% of the axiu ow rate - uitable for lifting and vertical transportation of sheet etal and steel structures in all horizontal positions, vertical and lateral - The security echanis ensures that it never releases the load when lifting or during transportation - Instruction anual for use and aintenance ,00 397,00 464,00 502,00 odel 0.75 TU 1 TU 2 TEU 3 TEU Load capacity ,000 3,000 Opening T U V W X Y , T Y 0% 100% 50 % 50% 50% U ITE: 7015 Lifting claps for handling sheet etal. - ody and coponents ade of high quality steel - The extent and thickness of the lifting capacity and jaw openings engraved on the body - iniu lifting weight > 10% of the axiu ow rate - uitable for lifting and vertical transportation of sheet etal and steel structures in three different ways of handling - grip/lifting - The security echanis ensures that it never releases the load when lifting or during transportation ITE: 7025 Lifting claps for handling sheet etal with daageable surfaces. tructural characteristics - Pads in plastic aterial to secure the integrity of the gripped surfaces - ody and coponents ade of high quality steel - The extent and thickness of the lifting capacity and jaw openings engraved on the body - iniu lifting weight > 10% of the axiu ow rate - uitable for lifting and handling vertical transportation to all those types of aterials at risk of daage: steel, aluiniu, plastic, wood and arble W V X - Instruction anual for use and aintenance ,00 368,00 414,00 odel 0.75 TP 1 TEP 2 TEP Load capacity 750 1,000 2,000 R opening T U V W X Y Y U - The security echanis ensures that it never releases the load when lifting or during transportation - Instruction anual for use and aintenance ,00 739,00 odel 0.5 TNK 1 TNK Load capacity 500 1,000 Opening H T U V W X 80 Y , % 50% % 45 V X

23 LIFTING LP ITE: 7030 Lifting claps for handling sheet etal pro les of various sizes. - ody and coponents ade of high quality steel -Threaded pin with oscillating terinal - The extent and thickness of the lifting capacity and jaw openings engraved on the body - iniu lifting weight > 10% of the axiu ow rate - uitable for lifting and vertical transportation of sheet etal and steel structures - Instruction anual for use and aintenance ,00 455,00 659,00 odel 0.5 T 1.5 T 3 T Load capacity 500 1,500 3,000 Opening W V D 27, E F G ,5 7,8 LIFTING LP ITE: 7040 Lifting claps for handling sheet etal of pipes. - ody and coponents ade of high quality steel - losing lever with an autoatic opening when the load is deposited - The extent and thickness of the lifting capacity and jaw openings engraved on the body - iniu lifting weight > 10% of the axiu ow rate - uitable for lifting and vertical transportation of of individual horizontal pipes, in bundles of round structures - Instruction anual for use and aintenance ,00 456,00 901,00 odel 0.5 TTL 1 TTL 2 TTL Load capacity 500 1,000 2,000 R opening ax U ax Y D G , Y ITE: 7035 Lifting claps for handling sheet etal with pro led bars. - ody and coponents ade of high quality steel - yetrical jaws concentric closure - The extent and thickness of the lifting capacity and jaw openings engraved on the body - iniu lifting weight > 10% of the axiu ow rate - uitable for lifting and vertical transportation of pro led bars, hot type IPE, INP, HE and etal structures - Instruction anual for use and aintenance ,00 361,00 odel 1 FV 3 FV Load capacity 1,000 3,000 Opening ax 357 D-ax 345 E 73,5 F HORIZONTL (ET OF PIR) LIFTING LP ITE: 7045 Lifting claps in pairs for the handling of at surfaces. - ody and coponents ade of high quality steel - The extent and thickness of the lifting capacity and jaw openings engraved on the body - iniu lifting weight > 10% of the axiu ow rate - uitable for lifting and transportation of horizontal sheet etal - The clap is blocked in a closed and opening position - ore pairs of grippers can be used - Instruction anual for use and aintenance ,00 346,00 433,00 511,00 odel 1 FH-X 2 FH-X 2 FH-X 3 FH-X Unit capacity 1,000 2,000 3,000 Opening D E f ,2 10 ax

24 DRU LIFTING LP ITE: 7050 Dru lifting claps for transportation of the drus. - ody and coponents ade of high quality steel - The extent, thickness of the lifting capacity and the jaw opening is engraved on the body - iniu lifting weight > 10% of the axiu ow rate - uitable for lifting and vertical transportation in coplete safety of even full drus - utoatic claping echanis - Instruction anual for use and aintenance ,00 odel TVK Load capacity 500 Opening 0-17 U 1.6 V 96 X 28 T 12 1,3 ELETRONI DYNOETER ITE: 7210 Electronic dynao eters digital weight display, designed for weighing overhead loads, light series. - tainless steel load cells with electronic casing - 5 nuber digital weight display - Infrared on/reset reote control - ax authorized afety load: 200% of its noinal capacity - afety braking: >5 - Protection: IP65 - Operating teperature: easuring accuracy: ± 0,1% referred to noinal capacity - Tare reset and weight calibration fro keyboard - electable digital lters for weight stabilization - utoatic keyboard selection shut-off - Peak and displayed weight storing (hold) function - easureent units selectable fro keyboard ( - N - kn - lb) - Power supply: three batteries 1,5 V - upplied coplete with: - Instruction anual for use and aintenance - Uniball suspension - Plastic casing DRU LIFTING LP ITE: 7055 Dru lifting claps for transportation of the drus. - ody and coponents ade of high quality steel - The extent, thickness of the lifting capacity and the jaw opening is engraved on the body - iniu lifting weight > 10% of the axiu ow rate - uitable for lifting and vertical transportation in coplete safety of even full drus - Instruction anual for use and aintenance ,00 odel TVKH Load capacity 600 Opening ax 331 D 100 E 50 F Load capacity Resolution step , , , , , , , , , ITE: 7220 Electronic dynao eters digital weight display, designed for weighing overhead loads, heavy series. - tainless steel load cells with electronic casing - 5 nuber digital weight display - Infrared on/reset reote control - ax authorized afety load: 200% of its noinal capacity - afety braking: >5 - Protection: IP65 - Operating teperature: easuring accuracy: ± 0,1% referred to noinal capacity - Tare reset and weight calibration fro keyboard - electable digital lters for weight stabilization - utoatic keyboard selection shut-off - Peak and displayed weight storing (hold) function - easureent units selectable fro keyboard ( - N - kn - lb) - Power supply: three batteries 1,5 V - upplied coplete with: - Instruction anual for use and aintenance - hackles suspension - Plastic casing , ,30 02 Load capacity Resolution step , , , * For 1000 capacity suspension shackles (not included) IPORTNT NOTE Dynaoeters with lower capacity listed at page D D E F G H I.46.47

25 DYNOETER FOR RNE WITH LE REDING T DITNE ITE: teel dynaoeter with integrated radio odule - With integrated radio odule, so the weighing data can easily be read off the display by the user, even if the user is a long way fro the crane scale - eparate display with large, backlit LD display, digit height 22 - Diensions L 175 x p 135 x h 39, aerial inclusive L 240 x p 135 x h 55 - wivel hook with safety device - bient teperature 0 / 40 - Precision 0,2% of [ax] ROUND LIFTING LING ITE: 7310 Round lifting slings in polyester. - Polyester coiled, high bre density, sleeved in a polyester protective braiding, featuring outstanding elasticity - axiu stretching 7% fully resued at rest - olouring as in the chart according to the standard regulations - Excellent elastic properties - Unalterable with heat and UV rays - Professional device for severe operating condictions in production, quality and logistics - utooy up to It's integrated R-232 data interface allows connection to a printer, P or network - Data hold function: when the weighing value reains unchanged, the weight indicated on the display is autoatically "frozen" until HOLD key is pressed - Instruction anual for use and aintenance FETY FTOR colour L INGLE/ DIRET PULL LOOP TYPE PRLLEL KET LOD PITY DOULE 45 DOULE 60 INGLE 45 INGLE Load capacity Resolution step g 72253T 1.450, T 1.980, X1 8, X1,5 10, X2 13, X2,5 17,10 Purple X3 18, X4 24, X5 29, X1 11, X1,5 19, X2 22, X2,5 25,30 GREEN X3 26, X4 35, X5 45, X1 15, X1,5 22, X2 26, X2,5 31, Yellow X3 41, X4 52, X5 61, X6 71, X1 19, X1,5 28, X2 34, X2,5 42, Gray X3 48, X4 63, X5 78, X6 94, ingle (direct) pull lifting power can be easily identi ed 1000 per black longitudinal line

26 WE LIFTING LING ITE: 7320 Polyester web lifting slings - Polyester coiled, high bre density, eyelet/loops with soft protection fabric - Outstanding elasticity, axiu stretching 7% fully resued at rest - EN standard colour - Outstanding elasticity - Heat and UV unalterable PROTETIVE LEEVING FOR LIFTING LING ITE: 7325 Protective sleeving in polyurethane for li ng slings. uitable to protect only one side of the strap fro sharp edges, corners and several types of roughness. 01 Tape capacity L H L1 H , FETY FTOR 7 1 LOD PITY 01 L INGLE/DIRET PULL LOOP TYPE PRLLEL KET KET 45 KET X1 10, X1,5 11, X2 14, X2,5 16, X3 17, X4 22, X5 26, X6 30, X1 16, X1,5 17, X2 19, X2,5 22, X3 26, X4 34, X5 40, X6 48, X1 25, X1,5 32, X2 33, X2,5 40, X3 41, X4 53, X5 65, X6 76, X8 110, X2 52, X3 69, X4 86, X5 102, X6 119, X8 152, X2 69, X3 90, X4 110, X5 131, X6 152, X8 193, X2 83, X3 110, X4 138, X5 166, X6 194, X8 249, X4 215, X5 256, X6 320, ingle (direct) pull lifting power can be easily identi ed 1000 per 30 of sling/tape width and per black longitudinal line. LDDER LOK LOURE TRP ITE: 7330 traps in polyester with locking buckle. uitable for holding tightly together in a practical and safe way various objects and structures. To be used only for anchoring needs. ales packaging iniu 2 pieces. onfezione inia 2 pezzi. 01 Tape width Tape length nchoring capacity dan , ,5 250 onfezione inia 2 pezzi. ITE: 7335 traps in polyester with locking buckle. uitable for holding tightly together in a practicl and safe way various objects and structures. To be used only for anchoring needs ales packaging iniu 2 pieces. onfezione inia 2 pezzi. 01 Tape width Tape length nchoring capacity dan , onfezione inia 2 pezzi

27 LDDER LOK LOURE, HOOK-ENDED TRP ITE: 7340 Polyester straps ladder lock closure, hook ended. uitable for holding tightly together in a practical and safe way various objects and structures. To be used only for anchoring needs. 01 Tape width Tape length nchoring capacity dan , RTHET TENIONER, HOOK-ENDED TRP ITE: 7360 Polyester straps with ratchet tensioner, hook ended. uitable for holding tightly together in a practical and safe way various objects and structures. To be used only for anchoring needs. 01 Tape width Length before and after ratchet nchoring capacity dan 73604,5 20, ,5 + 0, RTHET TENIONER TRP ITE: 7350 Polyester straps with ratchet tensioner. uitable for holding tightly together in a practical and safe way various objects and structures. To be used only for anchoring needs. 01 Tape width Tape length nchoring capacity dan , ITE: 7365 Polyester straps with ratchet tensioner, hook ended. uitable for holding tightly together in a practical and safe way various objects and structures. To be used only for anchoring needs. 01 Tape width Length before and after ratchet nchoring capacity dan , ,5 + 0, ITE: 7355 Polyester straps with ratchet tensioner. uitable for holding tightly together in a practical and safe way various objects and structures. To be used only for anchoring needs. 01 Tape width Tape length nchoring capacity dan 73558,5 53, ELF-ROLLUP NHORING YTE ITE: 7370 ELF ROLLUP anchoring featuring a brake interlock syste, allows for a constant onitoring of both rollup and extension process. Extreely easy to use. When not in use, the tape is safely kept in its casing so to avoid any cluttered and potentially dangerous dangling. ore to that, the tape/belt is kept clean, grease and dust free. GUIDELINE 1. LOD NHORING YTE Position lever in release position, siply use -shaped hook to pull the tape. Fix hood to the load anchoring point 2. TENIONING PROEDURE Push red button and lever together, the latter to be positioned Push the red button again, push lever downward o anually activate it Do not overload 3. LOKING PROEDURE In order to safely anchor load, ake sure the lever is in its lock position 4. WINDING ND RELEE Push red button and lever together, the latter to be positioned fro lock to release position reove hook fro anchoring point and proceed to gradual tape winding by pushing the red button 01 Diension et content pcs X3 42,00 25 x X3 65,70 50 x

28 DOULE LEG-EYE LING IN FIER ITE: 7410 ingle leg-eye sling - Polyester coiled, high density bre, sleeved in a polyester protective braiding - Excellent elasticity-axiu stretching 7% fully resued at rest - Rope safety factor 7:1 - etal coponents safety factor 4:1 - Excellent elasticity - Unaltered by heat and UV Ring, Hook and eye X0,5 38, X1 42, X1 49,60 olour PURPLE L Load capacity 1, X1,5 55,20 GREEN 1.5 2, X2 60, X1 79, YELLOW X1,5 86, ,000 ITE: 7415 Double leg-eye slings L LIFTING HIN LING ITE: 7440 Lifting chain slings single. - hain, cap, chain haerlock, grade 80 alloy steel hook - afety factor 4: ap, eye and hook X0,5 49,60 hain ø L Load capacity X1 56, X0,5 59, X1 68, X1 90, X1,5 104, ITE: 7445 Lifting chain slings double. - hain, cap, chain haerlock, grade 80 alloy steel hook - afety factor 4: ap, eye and hook - Polyester coiled, high density bre, sleeved in a polyester protective braiding - Excellent elasticity-axiu stretching 7% fully resued at rest - Rope safety factor 7:1 - etal coponents safety factor 4:1 - Excellent elasticity - Unaltered by heat and UV Ring, Hook and eye X0,5 69,50 olour 0.5 PURPLE X1 77, X0,5 83, X1 91, GREEN X1,5 102, X2 113, X0,5 138, X1 149, YELLOW X1,5 163, X2 178, ITE: 7420 Four leg-eye slings - Polyester coiled, high density bre, sleeved in a polyester protective braiding - Excellent elasticity-axiu stretching 7% fully resued at rest - Rope safety factor 7:1 - etal coponents safety factor 4:1 - Excellent elasticity - Unaltered by heat and UV Ring, Hook and eye X1 172,10 olour 1.0 PURPLE X1,5 189, X1 193, GREEN X1,5 215, X1 303, X1,5 331,50 YELLOW X2 361, L L Load capacity 1,400 2,800 3,800 Load capacity 2,100 4,200 6, X0,5 84,40 hain ø X1 97, X1,5 110, X0,5 104, X1 123, X1,5 142, X2 161, X1 167, X1,5 194, X2 222, X1 262, X2 348, ITE: 7450 Lifting chain slings quadruple. - hain, cap, chain haerlock, grade 80 alloy steel hook - afety factor 4: ap, eye and hook X1 203,50 hain ø X1,5 230, X1 257, X1,5 295, X1 344, L L Load capacity Load capacity X1 556, X2 730, HIN HERLOK FOR LIFITING HIN LING ITE: 7460 Grade 80 alloy steel hook for lifting chain slings. afety factor 4:1 01 Load capacity , , , , D E.54.55

29 EYE GRP HOOK FOR LIFTING HIN LIFTING GNET ITE: 7470 Eye grap hooks in alloy steel-grade 80 for lifting chains. uitable for an optiac chain length adjustent. afety factor 4:1 01 hain ø , ,70 7/ , ,30 13 EYE HOOK WITH FETY LTH (FOR LIFTING HIN) ITE: 7475 Eye hooks with safety latch in alloy steel-grade 80 afety factor 4:1 01 Load capacity D G H O R ITE: 8010 Lifting agnets peranent series EL. - djustable suspension ring - agnetic plate with V-shaped suitable for handling both at pieces and rounded shapes -Lever actuation agnetic eld coplete safety device to prevent iproper or accidental disengageents - Ef ciency equale to 3,5 ties the indicated capacity - tructure of sall size of reduced weight - The agnetic power reains absolutely unchanged overtie - Eliination of the risk of daaging the load with other chains or slings - Often a single operator is suf cient to lift and ove heavy or bulky loads - Less tie lifting and handling thanks to the iediate seizure of the cargo fro the agnet - Instruction anual - Test certi cate F G H E D , , , , uitable to be used for chain lifting slings 02 odel apacity D E f G H ITE: 7480 Eye hooks with safety latch in alloy steel-grade 80 afety factor 4:1 01 Load capacity , , , , uitable to be used for chain lifting slings ITE: 7485 Eye hooks with safety latch in carbon steel for lifting chains. afety factor 4: 1 G EYE HOOK WITH FETY LTH (FOR LIFTING) H P R ,00 EL ,00 EL ,00 EL ,00 EL *IPORTNT NOTE These capacities are only theoretical and they ay vary according to type of aterial used, ites diensions and their surface nishing. (see charts) X LOD PITY GNET Load capacity D E G H I L , , , WIVEL HOOK WITH FETY LTH ITE: 7490 wivel hooks with safety latch in carbon steel for lifting chains. afety factor 4:1 01 Load capacity d D E f G H I L L , , , , ,

30 LIFTING GNET NEO X LOD PITY ORDING TO TYPE OF URFE ND INGLE PIEE DIENION ITE: NEO- Lifting agnets peranent NEO series. - Use neodyiu based aterial featuring an all new aterial three ties better than ferroagnet - V-haped plates ake the t to handle both at (also narrow pro le plates and bars) and round shape ites (tubes and rods) - top block treated with aganese phosphate coating - Tested capacity of lifting 3 ties ore than noinal - ctuation lever of the agnetic eld with safety device to prevent iproper or accidental disconnections - Very light, copact and easy to use - The agnetic power reains absolutely unchanged overtie - Eliination of the risk of daaging the load with other chains or slings - Often a single operator is suf cient to lift and ove heavy or bulky loads - Less tie lifting and handling thanks to the iediate seizure of the cargo fro the agnet - Instruction anual - Test certi cate 02 odel Lifting pow. at surf. Lifting pow. at surf. ø in lift ø ax lift Eyebolt height Length x width ,00 NEO x ,00 NEO x ,00 NEO x ,00 NEO x ,00 NEO x

31 LIFTING GNET FLT250 ITE: 8030 Peranent lifting agnets FLT 250 odel for handling sheet etal and steel plates in horizontal and vertical position. - Lifting iniu thickness - Elevated security factor 1: 4 - Lockable lifting hook for easy vertical and horizontal oveents - Release lever for operators safety DJUTLE LIFTING ONOE ITE: 8120 djustable lifting bea without welding - Hook central suspension and swivel load hooks adjustable every 100 along the bea. - Instruction anual for operating use and aintenance. - Very light, copact and easy to use - Fro 4 thick, only 1 sheet is lifted fro the stack - The agnetic power reains absolutely unchanged overtie - Eliination of the risk of daaging the load with other chains or slings - Often a single operator is suf cient to lift and ove heavy or bulky loads - Less tie lifting and handling thanks to the iediate seizure of the cargo fro the agnet - Instruction anual - Test certi cate 02 odel ax work load Total length Useful length L Vertical size (Hp) without hook 02 Length x width x height Overall length Overall height Tested lifting force dan Workload liit horizontal Workload liit vertical ,00 P , D 1.030,00 P1-D 1,000 1,000-2, G 1.290,00 P1-G 2,000-3, D 1.200,00 P2-D 1,000-2, , G 1.740,00 P2-G 2,000-3, Hooks can be positioned every , x 200 x ,75 *Tested on t37 steel, ground surface, 25 thick.60.61

32 LIFTING WEIGHT RO - TYPE FOR IG G ITE: 8130 ross type lifting weights - entral ring sospension, load hooks to weld - Instruction anual for use and aintenance PPROVED TRETLE ITE: 8100 To further coply with the strict and speci c workplace safety rules, we introduce our trestle equipent range in stainless steel designed for static suspended product handling. safe and highly reliable tool for the industry production sectors. - Related approval and loading capacity certi cation. 02 Load capacity Length Width Height , , , , , ,3 02 Load capacity odel , , , , Interlock hooks L1 Interlock hooks L2 TOPR DEVIE FOR TRETLE ITE: 8104 topbar device for round pieces, for trestles. IG G ITE: P7012 tandard and hoologated ig ag with four lifting straps. P P P7012U2 P02 27,00 29,00 32, apacity Lt 1000 Load capacity For kirt and closed botto kirt and lower discarge spout losed botto Type approvat - UN 13H3Y 02 For trestles with load capacities of , , Individually sold

33 TTERY-POWERED LIFTER 150 ITE: 9005 attery-powered 15O odel - axiu load capacity 150 kg V- belt lifting syste - 4 Pivoting wheels, the front ones featuring 100 ø with breaks and rear ones ø 75 - ontrol panel with UP/DOWN coands ON/OFF button and charger attachent - Lifting speed: UP without loads 83/s with lifting speed at full load 70/s - Lowering speed DOWN without load 83/s lowering speed at full load 101/s - attery 24V / 16h - The sall size allows it to be used in con ned spaces which are dif lcult to reach Very cofortable and light can be used easily anywhere on any type of Industrial ooring Instruction anual of use and aintenance ,00 Lifting height 1550 Platfor 460 x 520 Overall diensions 480 x 815 x 1910 Forks in height 130 Forks width 330/ HND PLLET TRUK ITE: 9008 Hand pallet trucks - turdy painted steel structure - witch lever featuring good ergonoic grip for easy operation. 3-position control: down - neutral - up. - opper wheels, theroplastic polyer coating. -Handlebar is delivered as not assebled ,00 495,00 495,00 715,00 Load capacity kg Fork Diension 800 x x x x 540 Total length Lift H teering angle 220 Total height 1230 Rolls diensions 82 x 99 single ITE: 9010 Hand pallet trucks - turdy painted steel structure - switch lever featuring good ergonoic grip for easy operation. 3-position control: down - neutral - up. - opper wheels, theroplastic polyer coating. -Handlebar is delivered as not assebled ,00 640,00 Load capacity Forks x x 540 Total length Lift H teering angle 220 Total height Rolls diensions 82 x 70 double 85 x 70 double LE PLLET TRUK ITE: 9114 cale pallet trucks. - tainless steel, oven- re painted structure - witch level featuring good ergnoic grip for easy operation, 3 position control: down - neutral - up - steering wheels and double loading polyurethane rollers. - 4 shear-bea aluinu-based load cells - 25, backlit LD display, 6 high-contrast digits which are clearly visible even in poor lighting conditions - Waterproof ebrane keyboard with 5 functional, easy to use and intuitive keys - on guration, calibration and diagnostics fro keyboard - Power supply through 4 -type battery set, also rechargeable - Operating tie is of 40 hours of continuous use - Prograable auto switch-off function, battery level indication - High resolution weighing x 10 - Function of zeroing, tare, net/gross, lb/kg conversion, accuulation, forulation +/- checkweighing, counting. High resolution weighing. Net/gross or lb/kg conversion. ultiple weights total function. Percentage weighing. Pieces counting ,00 apacity 2000 Precision +/- 4 Fork Diension 1150 x 550 Lift H Rolls diensions 74 x 70 double

34 LE PLLET TRUK WITH PRINTER NUL IOR LIFT PLLET TRUK ITE: 9115 cale pallet trucks with printer. ITE: 9125 anual scissor lift pallet trucks tructural characteristic: - olid structure in steel and oven- re painted echanics - witch lever feauturing good ergnoic grip, for easy operation, 3 position control down - neutral - up - teering wheels and double loading polyurethane rollers. - 4 shear-bea, IP67-protection load cells - indicator in IP stainless steel water proof case, resistant to harsh and corrosive environents. - 25, backlit LD display, clearly visible even in poor lighting conditions. - Waterproof ebrane keyboard with 17 functional, easy to use and intuitive keys - on guration, calibration and diagnostics fro keyboard - Power supply through extractable rechargeable battery - Operating tie is of about 80 hours of continuous use or one onth with the typical non continuous use thanks to its prograable auto switch-off function - Function of zeroing, tare, net/gross, lb/kg conversion, accuulation, percentage weighing, counting - ax resolution of divisions - Equipped with 230Vac 50Hz battery charger (recharging tie is about 8 hours). - on gurable R23332/ port for connection to a printer. P, ode radio or portable terinal. - Fitted with theral printer with IR input for reote control anageent - On request E- approval for weighing for leagal use - olid steel painted structure - witch lever 3 position control up- neutral - down for easy operations - Equipped with a pup with 2 autoatic speeds - Fast ode: lifts up to 200 loads 800 fro ground level in 20 cycles. low ode: lifts 800 fro ground level in 55 cycles - Designed to increase the productivity thanks to the possibility of oving the weight up to a height of uitable for food presses, cutters, conveyor assebly lines etc ,00 apacity 1000 Fork Diension 1140 x 520 Lift H 800 in clearance fro ground Total length 1540 Rolls diensions 78 x ,00 apacity 2000 Precision +/- 2 Fork Diension 1150 x 550 Lift H Rolls diensions 74 x 70 double 127 ELETRI IOR LIFT PLLET TRUK ITE: 9135 Electric scissor lift pallet trucks - olid steel painted structure - witch lever 3 position control up- neutral - down for easy operations - Designed to increase the productivity thanks to the possibility of oving the weight up to a height of uitable for food presses, cutters, conveyor assebly lines etc. HND PLLET TRUK WITH WEIGHING YTE ITE: 9116 Hand pallet truck with weighing syste - 12 V battery and standard battery charger ,00 apacity 1000 Fork Diension 1170 x 570 Lift H 800 in clearance fro ground Total length 1570 otor 0,58KW - 12V attery 12V - 52h Rolls diensions 78 x Low weight copact structure, Perfectly suited for heavy duty loads in the anufacturing industry and aboard lorries - t heavy duty operations thanks to sensitive coponents which ove within the housing protection area. - witch lever featuring good ergnoic grip down - neutral - up - IP65 indicator Dust and water splash protection - Expressly designed for check weighing procedures, such as weight plausibility checks in the ow of goods, shipping weight calculation, avoiding overloading, security checks OILE IOR ELEVTING PLTFOR ITE: 9210 obile scissor elevating platfor ,00 Load capacity 2000 Weighing platfor diens. 5 Overall diensions 1150 x 540 x 83h Positioning aterial Plastic Weighing platfor aterial Varnished steel Platfor surface cciaio verniciato uper cie di pesata 1150 x olid steel painted structure - Foot pup with pup and cylinder and piston rod of hard chroe - 2 xed wheels - 2 swivel wheels with brake - anual lowering lever control L L ,00 950,00 940, ,00 Load capacity Platfor 815 x x x x 750 in- ax height

35 OILE DOULE IOR ELEVTING PLTFOR ITE: 9220 obile double scissor elevating platfor. - olid steel painted structure - Foot pup with pup and cylinder and piston rod of hard chroe - 2 xed wheels - 2 swivel wheels with brake - anual lowering lever control ,00 Load capacity 350 Platfor 905 x 512 in- ax height DOULE IOR ELEVTING PLTFOR ITE: 9225 Double scissor elevating platfor. ELETRI ELEVTING PLTFOR ITE: 9230 Electric elevating platfors - olid steel painted structure - Operations of up and down are activated through the relevant buttons - n excess ow valve controls the speed of descent of different loads - Perieter protection placed under the lifting platfor, if during descent there are ipedients the table is locked , , , ,00 Load capacity Lifting tie sec Load lifting speed /s Load lifting speed /s Electric otor kw 0,75 three - phase Diension 800 x in - ax height olid steel painted structure - Foot pup with pup and cylinder and piston rod of hard chroe - 2 xed wheels - 2 swivel wheels with brake - anual lowering lever control ,00 apacity 700 Platfor 1220 x 610 in-ax height OILE IOR ELEVTING PLTFOR WITH ROLLER ITE: 9250 obile scissor elevating platfor with rollers - olid steel painted structure - Foot pup with pup and cylinder and piston rod of hard chroe - 2 xed wheels - 2 swivel wheels with brake - anual lowering lever control - Roller with echanical latches on both ends easily to ove the weight longitudinally to the table ,00 Load capacity 500 Platfor 815 x 500 in- ax height OILE DOULE IOR ELEVTING PLTFOR WITH ROLLER ITE: 9255 obile scissor elevating platfor with rollers. GRU GIREVOLI 360 ZVORRTE ITE: 9310 Pivoting cranes with anual lifting. - Lifting with anual dual delivery pup that provides quick lifting - Pivoting wheels high ow control valves with high soothness with buper supports and parking brakes - Revolving at Extendable are in 4 different positions - Load down regulated by handwheel built into the pup - uitable for front loading and direct feed - It reduces operator fatigue thanks to the increased pup size - Extreely versatile thanks to its reduced size that perits it to reach tight spaces - Instruction anual - allast in ceent - dditional ar extensions on request PRL ,00 280,00 apacity Optional extension antilever ax apacity with extension antilever with extension ax with extension with ballast olid steel painted structure - Foot pup with pup and cylinder and piston rod of hard chroe - 2 xed wheels - 2 swivel wheels with brake - anual lowering lever control - Roller with echanical latches on both ends easily to ove the weight longitudinally to the table ,00 apacity 350 Platfor 905 x 512 in-ax height

36 NTILEVER RNE WITH LLT ITE: 9312 antilever crane with ballast anual lifting - Double acting lifting pup which enables quick lifting - The base crane is equipped with 2 xed wheels and 2 steering wheels connected to the steering wheel position, to allow extree aneuerability - 4 way extendable jib - Load down regulator built into the pup - uitable for front loading and direct feed - It reduces operator fatigue thanks to the increased pup size - Extreely versatile thanks to its reduced size that perits it to reach tight spaces - allast in concrete - r extension suppleent on request PRL ,00 370,00 apacity Optional extension antilever ax apacity with extension antilever with extension ax with extension with ballast PIVOTING RNE WITH ELETRI LIFTING EXTENION ITE: 9321 Pivoting cranes with electric lifting extensions - Lifting and electrical extension through convenient joystick aneuvering the ascent, the descent and the extension of the ar - High ow castor wheels with high soothness with buper supports and parking brakes - Revolving at Extendable lifting ar in a continous anner over the entire length - Load down regulated by handwheel built into the pup - uitable for front loading and direct feed - Extreely versatile thanks to its copact diension that perits it to reach tight spaces - 12 V battery high frequency battery charger - allast in concrete - n additional extension jib is available on request PRL 9320T , ,00 280,00 235,00 Load capacity Optional extension attery balzo ax Portata con prolunga balzo con prolunga ax con prolunga Peso con zavorra ELETRI PIVOTING RNE 360 LLT ITE: 9320 Pivoting cranes ballast with electrical li ng. - Electrical lifting through a key pad aneuvering the ascent and descent of the ar - Pivoting wheels high ow control valves with high soothness with buper supports and parking brakes - Revolving at Extendable are in 4 different positions - Load down regulated by handwheel built into the pup - uitable for front loading and direct feed - Extreely versatile thanks to its reduced size that perits it to reach tight spaces - 12V battery and battery charger of high frequency - allast in ceent - dditional ar extension on request T 9325PRL , ,00 235,00 280,00 Load capacity attery Optional extension antilever ax apacity with extension antilever with extension ax with extension with ballast

37 NTILEVER RNE WITH LLT ITE: 9322 antilever crane with ballast electric li ng syste tructural characterists: - Electrical lifting through push button aneuving coand for ascent and descent of the ar - Equipped with 2 xed wheels and 2 steering wheels which allow an extree aneuvability even at full load way extenable jib - uitable for front loading and direct feed - Extreeley versatile thanks to its copact diension that perits it to reach tight spaces - Instruction anual of use and ainenance - 12 V battery - high frequency battery charger - allast in concrete - r extension suppleent on request PRL 9320T ,00 370,00 235,00 Load capacity Optional extension attery antilever ax apacity with extension antilever with extension ax with extension with ballast POWER DRIVEN 270 WIVEL RNE ITE: 9325 Power driven swivel crane with electrical and otirized syste - Electrical lifting through coand positioned on the tiller for ascent and descent - otorized handling revolving swivel way extenable jib - Load down regulator built into the pup - uitable for front loading and direct feed - Extreeley versatile thanks to its copact diension that perits it to reach tight spaces - Two 24 V batteries and high frequency battery charger - allast in concrete - r extension suppleent on request T 9325PRL ,00 390,00 280,00 Load capacity attery Optional extension antilever ax apacity with extension antilever with extension 885 ~ ax with extension with ballast PIVOTING RNE WITH ELETRI LIFTING EXTENION ND OTORIZED HNDLING ITE: 9326 Pivoting cranes with electric lifting extensions and otorized handling - Lifting and electrical extension through convenient joystick aneuvering the ascent, the descent and the extension of the ar - otorized handling - Revolving at Extendable lifting ar in a continous anner over the entire length - Load down regulated by handwheel built into the pup - uitable for front loading and direct feed - Extreely versatile thanks to its copact diension that perits it to reach tight spaces - Two 24 V batteries high frequency battery charger - allast in concrete - n additional extension jib is available on request T 9325PRL ,00 390,00 280,00 Load capacity attery Optional extension balzo ax Portata con prolunga balzo con prolunga ax con prolunga Peso con zavorra

38 HYDRULI RNE-LIGHT ERIE ITE: 9352 Hydraulic cranes, light series. - Double effect pup - ide tie rods - Overload valve - r with 4 extensible positions - Fixed front wheels, pivoting rear wheels - Instruction anual for use and aintenance , , , ,00 Load capacity Variable capacity / / / / FOLDLE HYDRULI RNE WITH LOW PROFILE LEG ITE: 9363 Foldable hydraulic cranes, low folding pro le series. - teel frae-fold-away eleents - Double effect pup - ide tie rods - Overload valve - r with 4 extenable positions - four wheels-two xed, two pivoting rear wheels ,00 Load capacity 500 Lowered odel QUIK LIFTING FOLDING HYDRULI RNE ITE: 9362 Foldable hydraulic cranes, folding pro le series. - teel frae-fold-away eleents - Double effect pup - Overload valve - r with 4 extenable positions - four wheels-two xed, two pivoting rear wheels , ,00 Load capacity kg Variable capacity kg HYDRULI OTTLE JK ITE: 9365 Hydraulic bottle jacks - teel structure - strong resistance - High stability support base - Overload protection valve - Instruction anaual for use and aintenance ,00 72,00 104,00 191,00 275,00 Load capacity D E 120 x x x x 183 F