CONTENTS. JDN Air Hoists mini 2-3

Transcription

1 GENERAL ATALOGUE

2 ONTENTS ONTENTS JN Air Hoists ini - JN Air Hoists PROFI The odular syste at a glance 5 PROFI 05 TI up to TI PROFI TI up to 0 TI 7 PROFI 5 TI up to 0 TI 8 JN Air Hoists M Series 9 JN Trolleys PROFI in Manual Trolley (LN) PROFI in Reel hain Trolley (LH) PROFI in Motor Trolley (LM) JN Air Winches PROFI LIFTER and PROFI PULLER PROFI LIFTER 500- and PULLER PROFI LIFTER 500-, / 0-, - 7 PROFI LIFTER 0-, / 000-, and PULLER 0-, / 000-, 8-0 Special winch applications PROFI LIFTER 0- / 000- and PULLER 0- / Equipent, Options and Accessories 5 JN Big Bag Handling Air Hoists - 7 JN Low Headroo Trolleys 8-9 JN Ultra-Low Monorail Hoists 0 - JN Monorail Air Hoists - JN Hydraulic Hoists and Monorail Hoists PROFI TI-H up to 0 TI-H - 5 PROFI 5 TI-H up to 0 TI-H EH 0-H up to EH 0-H 7 JN Air ranes / rane Kits 8 JN Ratchet Hoists WITT 9 JN ontrols 0 - JN Accessories / Eplosion-Proofness JN Quality JN opany Portrait

3 JN AIR HOISTS ini The JN ini Series for General uty arrying capacities: 5, 50, 500, 9 Air pressure: bar The ini widens the range of applications in the light duty sector as a handy, fleible and universally deployable hoist aking it an ideal tool for a wide range of light/ediu anufacturing applications. For heavier duty industrial applications we recoend the JN PROFI series. ini Manipulator With the ini Manipulator loads can be lied, lowered, anually traversed and positioned with only one hand. Further inforation on request. Eplosion lassification: II G IIA T(X) ini 5 ini 00 in anual trolley ini Manipulator TEHNIAL ATA ini 5 ini 50 ini 500 ini 00 THE AVANTAGES AT A GLANE Price copetitive alternative when copared to other types of powered hoists. Suitable for lube-free operation. Suitable for application in hazardous areas. Miniu coponents for ease of aintenance. Wear resistant otor braking syste. Lightweight for easy handling. Also suitable for horizontal pulling. Etreely sensitive lever control with eergency shut-off valve, a. control length. Available liing heights:, 5, 8. With chain bo as standard. With anual trolley as option. apacity Nuber of chain strands Motor output Air pressure Liing speed without load Liing speed at full load Lowering speed at full load Lowering speed without load Air consuption at full load liing Air consuption at full load lowering Air connection Hose diension (Ø inside) Weight with / li hain diension Weight of chain Height of li Length of control at standard li Noise level at full load liing Noise level at full load lowering kw PSI bar /in /in / / G / G / / / / 5 / 8.5 / / 0 / / G / G / Group echanis: M ( B) Liing speed at length of control. Longer control hoses decrease the liing speeds. Measured at distance acc. to IN 55 part 0

4 JN AIR HOISTS MINI IMENSIONS A B E F G H J K L M ini 5 ini 50 ini 500 ini B A E F G K L I M J H M MANUAL TROLLEYS FOR JN AIR HOISTS ini TEHNIAL ATA LN 500 LN 00 L For use with: Bea flange width b a. flange thickness t in. curve radius Weight ini 5 ini ini 500 ini L IMENSIONS b T A H I L L O T LN LN t O H A

5 JN AIR HOISTS PROFI arrying capacities: 50 up to 0 t Air pressure: bar or bar Proven in practice: JN Air Hoists PROFI Series are superior in all places where safety has priority. Unlike electric current, the copressed air power driving ediu does not produce any ignition risk. This iportant advantage ensures JN Air Hoists are especially suitable for applications in hazardous areas. JN Air Hoists PROFI Series are very robust and therefore suitable for tough industrial applications even in continuous working processes. According to your requireents there are various control systes available. For traversing loads there are also different trolley designs to eet your particular deands. Where the JN PROFI ecellence has been proven Aircra construction, assebly lines, cheical industry, dairies, electro plating, eplosives and pyrotechnics industry, food industry, foundries, furniture industry, glass industry, lacquer and varnish factories, atch industry, echanical engineering, auto industry, oil storage plants, on- and offshore, paint shops, paper industry, power plants, refineries, sawills, shipyards, space industry, tepering plants, tetile industry. STANAR FEATURES Suitable for application in hazardous areas Sensitive infinitely variable speed control for the precise positioning of loads Easy operation Suitable for lube-free operation Frequent switching and etended duty cycles Low aintenance Low headroo, lightweight Sound absorption Insensitive to dust, huidity and teperatures ranging fro -0 up to +70 Fro t upwards with overload protection (E-version) Low sound eissions TEHNIAL ETAILS Fail-safe starting, low aintenance vane otor hain sprocket in the id section runs in dust-proof aintenance-free ball bearings Planetary gear bo with long-life grease lubrication, all gears ade of tepered or hardened high-grade steel Load chain and hooks anufactured fro high quality tepered steels with a breaking strength of five ties the noinal load THE AVANTAGES AT A GLANE Strong Fast Silent High perforance with ore efficiency by reliability plus high liing and lowering speeds. Low sound eissions. High Level of Safety Integrated eergency stop switch in the ain air supply*. Fro t upwards with overload protection. Oil-Free Operation Patented, peranent otor lubrication during operation, using a high-perforance grease. No additional otor lubrication required. Patented Motor-Brake Syste For operation with low aintenance and little wear. Based on the proven design of the JN Mini Series. Modern esign opact Size Features no protruding control hoses or parts susceptible to daage, aking the new PROFI also suitable for horizontal pulling. 0 % uty Rating No owntie Suited For Application In Hazardous Areas According to E irective on Hazardous Locations 9/9/EE As standard: II G IIA T(X) / II G IIB T(X) With increased spark protection: II G II T(X) *Up to PROFI 0 TI

6 JN AIR HOISTS PROFI The odular syste at a glance Liit Switch for Trolley Travel Etension Ar for ontrol Trolleys Manual Trolley Reel hain Trolley Motor Trolley Special High Perforance Grease for oil-free operation Housing Finish Standard JN Green -coat offshore paint syste Nickel plated Service Unit Filter Regulator Filter Silencer hain ontainer hain Bo hain Bag Hook Standard opper-plated Stainless Steel Supply Spiral Hose Energy hain -rail Square Bar Liit Switch for Li ontrols Rope ontrol FI ontrol (sensitive) E ontrol (single speed) F ontrol (ulti-function) Reote ontrol Electropneuatic Interface E lassification Standard: II G IIA T(X) / II G IIB T(X) With increased spark protection: II G IIB T(X) With increased spark protection for eplosion group II: II G II T(X) 5

7 JN AIR HOISTS PROFI PROFI 05 TI - TI TEHNIAL ATA 05 TI 05 TI TI TI Air pressure arrying capacity Nuber of chain strands Motor output Liing speed at full load Liing speed without load Lowering speed at full load Air consuption at full load - liing Air consuption at full load - lowering PSI bar t kw /in /in Air connection Hose diension (ø inside) Weight with standard li height and control length hain diension Weight of chain Standard li Lenght of control at standard li Noise level at full load - liing Noise level at full load - lowering 7 77 G / G / G / G / PROFI TI Group echanis at bar: PROFI 05TI M5 (), PROFI 05TI - PROFI TI M (A) With overload protection Measured at distance acc. to IN 55 part 0 IMENSIONS 05 TI 05 TI TI TI A in. headroo B E E F up to hook centre G aiu width hain containers increase the hoist headroo

8 JN AIR HOISTS PROFI PROFI TI - 0 TI TEHNIAL ATA Air pressure apacity Nuber of chain standards Motor output Liing speed without load Liing speed at full load Lowering speed at full load Air consuption at full load liing Air consuption at full load lowering Air connection Hose diension (Ø inside) Weight with standard li height and control length hain diension Weight of chain Standard li Lenght of control at standard li Noise level at full load - liing Noise level at full load - lowering PSI bar t kw /in /in / / TI TI TI TI 0 TI G / G / G / G / G / PROFI TI Group echanis at bar: M (B) Measured at distance acc. to IN 55 part 0 IMENSIONS TI TI TI TI 0 TI A in. headroo B E E F up to hook centre G aiu width hain containers increase the hoist headroo 7

9 JN AIR HOISTS PROFI PROFI 5 TI - 0 TI TEHNIAL ATA 5 TI 7 TI 50 TI 0 TI Air pressure apacity Nuber of chain standards Motor output Liing speed without load Liing speed at full load Lowering speed at full load Air consuption at full load - liing Air consuption at full load - lowering Air connection Hose diension (Ø inside) Weight with standard li height and control length hain diension Weight of (.8 ) chain Standard li Lenght of control at standard li Noise level at full load - liing Noise level at full load - lowering PSI bar t kw /in /in / / G G G G / PROFI 0 TI Group echanis at bar: PROFI 5TI - PROFI 50TI M (B), PROFI 0TI M () Versions with bar for PROFI 5TI and PROFI 0TI on request. Measured at distance acc. to IN 55 part 0 IMENSIONS A in. headroo B E E F up to hook centre G aiu width hain containers increase the hoist headroo 5 TI 7 TI 50 TI TI

10 JN AIR HOISTS M SERIES arrying capacities: t up to t Air pressure: bar JN Air Hoists of the M series were originally developed for underground ining operations. ue to their versatility they are nowadays also deployed in any different industrial fields. Generally they have the sae features as the hoists of the PROFI series but operate with an air pressure of only bar. Two different control systes are available. FURTHER SIGNIFIANT FEATURES AS STANAR: Suitable for use in hazardous areas with risk of eplosion Two chain falls for alternate working Specially designed for horizontal oving of loads M TEHNIAL ATA M M arrying capacity Nuber of chain strands Motor output Air pressure Liing speed at full load * Liing speed without load * Lowering speed at full load * Air consuption at full load - liing Air consuption at full load - lowering Air connection Hose diension (Ø inside) Weight with standard li height and control length Weight without chain, without control hain diension Weight of (.8 ) chain Heights of li Lenght of control Noise level at full load t kw PSI bar /in /in / / /.9 /.5./. 8/ /..5/ Rd /8" /8. 5/ / /. 5 7./../../8. 5/.5 9.7/9.8 / Rd /8" /8. 5/ Group echanis: M ( B) Measured at distance acc. to IN 55 part 0 IMENSIONS M M A (sallest headroo with / chain strands) A (sallest headroo with / chain strands) B (with / chain strands) inch B (with / chain strands) E (Hook opening) E (Hook opening) E (Hook opening) F (aiu width)

11 JN TROLLEYS arrying capacities: up to 0 t JN Trolleys are available for all hoists of the PROFI and M series: As anual trolleys (LN) for pushing or pulling the trolleys by hand As reel chain trolleys (LH) for oving the trolleys by operating the reel chain echanis As otorised trolley (LM) powered by an air otor STANAR FEATURES Easy to install With anti-clib and anti-drop devices Robust anufacture requiring little aintenance Able to negotiate curves OPTIONS Rack and pinion drive Spark-resistant package Offshore paint ENERGY FEEING SYSTEMS The air supply can be fed by various systes: Energy chain -rail Square rail Spiral hose Hose trolleys TEHNIAL ATA JN Air Hoist PROFI arrying capacity of trolley LN arrying capacity of trolley LH and LM arrying capacity of hoist with trolley Weight of Manual Trolley (LN) Weight of Reel hain Trolley (LH) Weight of Motor Trolley (LM) Hoist weight, standard li Total weight with standard li Manual Trolley Total weight with standard li Reel hain Trolley Total weight with standard li Motor Trolley Weight of (.8 ) chain Nuber of chain strands hain diension Air pressure Motor Trolley Air consuption Motor Trolley (at full load) Air consuption hoist (at full load) Motor output Motor Trolley Motor output hoist Travelling distance Reel hain Trolley, chain reel off Travelling speed Motor Trolley (at full load) Hose connection Motor Trolley Miniu radius Manual Trolley 0 Miniu radius Reel hain Trolley and Motor Trolley Ma. botto flange thickness t Manual Trolley Ma. botto flange thickness t Reel hain and Motor Trolley Ma. botto flange width b Manual Trolley Ma. botto flange width b Reel hain and Motor Trolley Min. botto flange width b Manual Trolley Min. botto flange width b Reel hain and Motor Trolley Noise level at Motor Trolley t t t PSI bar kw kw * st speed of F control with two speeds Measured at the iddle of the bea Measured at the inner edge of the bea Measured at distance acc. to IN 55 part 0 The designation of the trolley is coposed of the short code (LN, LH, LM) and the carrying capacity acc. to table, as for eaple LN t. 05 TI 05 TI G / TI * / 9* /. 58 TI TI TI TI TI 0 TI * / 5* / G / apacities over 0 t see JN Monorail Air Hoists page Versions with one and two hooks (e.g. BBH) see page Low Headroo Trolleys for restricted headroos see page 8

12 JN TROLLEYS PROFI in Manual Trolley (LN) IMENSIONS JN Air Hoist PROFI 05 TI 05 TI TI TI TI TI TI TI With Trolley LN 0.5 t LN t LN t LN. t LN. t LN - t A B a. d a. E F G H J* (ounted) J* (suspended) K L M N b +. b b + b b +. b b +.8 b PROFI TI in Manual Trolley * hain containers increase the hoist headroo A N B b d J K L E F M G H

13 JN TROLLEYS PROFI in Reel hain Trolley (LH) IMENSIONS JN Air Hoist PROFI 05 TI 05 TI TI TI TI TI TI TI 0 TI With Trolley LH t LH. t LH. t LH - t LH 0 t A B a. d E F G H J* (ounted) J* (suspended) K L M N b +. b b +. b b +.8 b b +.7 b PROFI TI in Reel hain Trolley * hain containers increase the hoist headroo

14 JN TROLLEYS PROFI in Motor Trolley (LM) IMENSIONS JN Air Hoist PROFI 05 TI 05 TI TI TI TI TI TI TI 0 TI With Trolley LM t LM. t LM. t LM - t LM 0 t A B a. d E F G H J* (ounted) J* (suspended) K L M N b +. b b +. b b +.8 b b +.7 b PROFI TI in Motor Trolley * hain containers increase the hoist headroo

15 JN AIR WINHES PROFI apacities: 500 up to 000 PROFI LIFTER 500- J..Neuhaus has been the arket leader in copressed air powered liing equipent for decades. In our latest ilestone we have added a series of air winches to our product line. PROFI LIFTER 500- PROFI PULLER 0- JN Liing Winches (LIFTER 500-) with capacities of 500 at the 5th layer and 750 at the st layer and Pulling Winches (PULLER 0-) with capacities of 50 at the 5th layer and 0 at the st layer. The low weight of under 0 akes this series obile, ideal for ultiple applications. The winches provide sensitive operation by direct controls (push button or lever) over the full load range. PROFI PULLER 0- with pulling frae* TEHNIAL ATA THE AVANTAGES AT A GLANE ru integrated ehaust air cooled planetary gearbo for iniu aintenance and aiu reliability at a 0 % duty cycle. opact design and low weight for obile applications. Powerful pneuatic drive with sensitive control. High rope capacity up to 5 layers. Ideal for operation in hazardous areas II G IIA T(X). Air pressure PSI bar Liing capacity in the last layer Liing capacity in the first layer Pulling capacity in the last layer Pulling capacity in the first layer Ma. nuber of rope layers Ma. otor power Air connection G / Air consuption at noinal load - liing/pulling. 8.9 /in.. Air consuption at noinal load - lowering 5 /in.5 Hose size (ø inside) Rope dru diaeter Rope diaeter kw Miniu breaking force of rope lbf kn.5.5 Weight (without rope, with control) ontrol length (F control) Noise level at noinal load - liing/pulling 87 Noise level at noinal load - lowering 89 Group echanis: M ( A) Measured at distance acc. to IN 55 part 0 * Option PROFI LIFTER / - / PROFI PULLER 0-

16 JN AIR WINHES PROFI PERFORMANE ATA IMENSIONS []/[] PROFI LIFTER 500- Rope diaeter /" / Rope Layer Load []/[] / 50 0 / 500 Speeds []/[] Liing Lowering. Layer 5. Layer 58. / / 8.. /.. / 9.0. /.. / 9.8. Layer 5. Layer.7 /. 9. /. /. 9.9 / / 9.9. / 7.9 /" 5. / / 750. /.8 7 /. PROFI PULLER 0-. / / 0 Rope diaeter /" / Rope Layer Load []/[] 0 5 / / 50 Speeds []/[] Pulling Unwinding. Layer 5. Layer 58. / / 8. /. 0. / 7..8 /.0 8. / 8.. Layer 5. Layer.7 /. 9. /. 8. / 5 / 7 / 55 /" 7. / / 0 0. /. HARATERISTI LOA URVES PROFI LIFTER 500- / PROFI PULLER 0- Rope pulling force [kn] [lbf] 7 Noinal pressure PSI / bar Rope diaeter /" / first rope layer last rope layer 50 5 first rope layer PROFI LIFTER 500- PROFI PULLER 0- last rope layer Lowering Rope speeds [] Pulling / Liing [] PROFI LIFTER /.89 / 75 / 90 PROFI PULLER 0-. / 7. / 88 ROPE APAITIES PROFI LIFTER 500- / PROFI PULLER 0- Ma rope capacity per layer Rope diaeter / / st /. / / 7.8 st and nd / 75. /. 58. / 7.8 st, nd and rd /. / / 9. st, nd, rd and th / 7.5 / 5..8 /.7 st, nd, rd, th and 5th /. / 8.9 Recoended rope diaeter: /" / 5

17 JN AIR WINHES PROFI PROFI LIFTER 500-, / 0-, TEHNIAL ATA PROFI LIFTER 0-, JN Air Winches with capacities of 500 and 0. Lightweight aluiniu castings ake this series obile, ideal for ultiple applications. THE AVANTAGES AT A GLANE ru integrated ehaust air cooled planetary gearbo for iniu aintenance and aiu reliability at a 0 % duty cycle. High rope capacity. Ideal ratio of dru/rope diaeter (/d=8) ensures a long duty cycle of the rope. Variable speeds, easy to install, low noise level. Ideal for applications in hazardous areas II G IIA T(X). Various options. Noinal pressure (required static pressure) PSI bar apacity in the last layer Ma. nuber of rope layers Ma. otor power kw. Air connection Hose size (ø inside / ø outside) Air consuption at noinal load - pulling.. /in..5 Air consuption without load - pulling /in Air consuption at noinal load - lowering 9.8. /in..5 Air consuption without load - lowering 8.8. /in.. Ma. possible rope diaeter 5/ /8 7 Miniu breaking force of rope lbf kn.5 9. Weight (without rope and additional devices) 7 87 ontrol length for pendant control Noise level without load 87 - liing or pulling Noise level without load 8 - lowering or unwinding Noise level at noinal load liing or pulling Noise level at noinal load lowering Group echanis: M (B) Measured at distance acc. to IN 55 part 0 PERFORMANE ATA PROFI LIFTER 500-, Rope diaeter /"/7 Rope Layer Load condition []/[] / 50 0 / 500 / 0 PROFI LIFTER 0-, Rope diaeter /"/9 Rope Layer Load condition []/[] 0 8 / / 0 / 9. Layer 5.0 / / / / 7.5. Layer. /.7 7. /. 8. /. 5. /.8 PROFI LIFTER 500-, 0-, G / 5/. 9/ Speeds []/[] Liing Lowering. Layer 5. /. 9.7 /. 7.7 /.. Layer. / / /.0 8. / 5. Speeds []/[] Liing Lowering. Layer 8. / 9..9 /.. /.. Layer 9.8 / / / /.. Layer 5. / / /.. Layer 9. / /.9 7. /.8

18 JN AIR WINHES PROFI HARATERISTI LOA URVES PROFI LIFTER 500-, Rope pulling force [kn] [lbf] PROFI LIFTER 0-, Rope pulling force [kn] [lbf] Noinal pressure PSI / bar Rope diaeter /" / 7 8 PROFI LIFTER 500-, Noinal pressure PSI / bar Rope diaeter /8" / 9 8 PROFI LIFTER 0-, last rope layer first rope layer first rope layer last rope layer last rope layer 9 first rope layer first rope layer last rope layer Lowering Rope speeds [] Pulling / Liing [] Lowering Rope speeds [] Pulling / Liing [] ROPE APAITIES PROFI LIFTER 500-, Full used rope layer st st and nd st, nd and rd st, nd, rd and th / / / / Recoended rope diaeter: /" / 7 Rope diaeter for rope drus with grooving: /" / 7 Rope diaeter / 5/.8 / / 8. /..0 /. 8.5 /. 79. / / 9.9 / 77.0 PROFI LIFTER 0-, Full used rope layer st st and nd st, nd and rd / / / Recoended rope diaeter: /8" / 9 Rope diaeter for rope drus with grooving: 5/" / 8 Rope diaeter 5/ /8 57. / /.5. / 8.5. /. 0.0 /. 7. / 5. IMENSIONS L PROFI LIFTER 500-, 0-, B /. / 50 H a. /.9 / 0 L / 0. / 5 L /. / 90 / / 0. / / 9.5 / 0 A / 9.7 / A /.5 / 8 A L H B A A 7

19 JN AIR WINHES PROFI PROFI LIFTER 0-, / 000-, PROFI PULLER 0-, / 000-, PROFI LIFTER 0-, PROFI LIFTER 000-, TEHNIAL ATA 8 JN Liing and pulling winches are anufactured with a highly durable steel structure in liing capacities of 0 and 000 and pulling capacities of 0 and 000. THE AVANTAGES AT A GLANE ru integrated ehaust air cooled planetary gearbo for iniu aintenance and aiu reliability at a 0 % duty cycle. High rope capacity. Ideal ratio of dru/rope diaeter (/d=) ensures a long duty cycle of the rope. Variable speeds, easy to install, low noise level. Ideal for applications in hazardous areas. Standard odels: II G IIA T(X) / II G IIB T(X) With increased spark protection: II G IIB T(X). Various options. Noinal pressure (required static pressure) apacity (noinal load for liing winches) in the last layer Pulling capacity (noinal load for Pulling winches) in the first layer Ma. nuber of rope layers Ma. otor power Liing/pulling speed without load Liing/pulling speed at % of the noainal load Liing/pulling speed at noinal load Lowering/unwinding speed without load Lowering speed at noinal load Air connection Air consuption at noinal load - pulling Air consuption at noinal load - liing Air consuption without load - pulling Air consuption without load - liing Air consuption without load - lowering Air consuption at noinal load - lowering Hose size (ø inside) Rope dru diaeter Ma. possible rope diaeter Miniu breaking force of rope Weight (without rope and additional devices) short dru version Weight (without rope and additional devices) long dru version ontrol length for pendant control Noise level without load - liing or pulling Noise level without load - lowering or unwinding Noise level at noinal load - liing or pulling Noise level at noinal load - lowering PSI bar kw /in /in /in /in /in /in lbf kn PROFI LIFTER 0-, G / / PROFI LIFTER 000-, G / PROFI PULLER 0-, G / / PROFI PULLER 000-, G / Group echanis: M (B) Measured in the first layer with a. rope diaeter Measured at distance acc. to IN 55 part 0

20 JN AIR WINHES PROFI PERFORMANE ATA PROFI LIFTER 000-, with long dru* and pulling frae* PROFI PULLER 000-, with long dru* and free-spooling clutch PROFI LIFTER 0-, PROFI PULLER 0-, Rope diaeter /8" / Rope Layer Speeds []/[] Liing Lowering. Layer. Layer. Layer. Layer Rope diaeter /8" / Rope Layer Speeds []/[] Pulling Unwinding. Layer. Layer. Layer. Layer Load condition []/[] 0 0 / 00 00/0 00/500. / /.5.5 /. 5.9 / / /.7. / /. 5. / / / 5.. / / 5.9. /.7 Load condition []/[] 0 0 / 00 00/0 000/0. / /.5.5 /. 8. / / /.7. / /.. / 0. PROFI LIFTER 000-, PROFI PULLER 0-, Rope diaeter /" / Rope Layer Speeds []/[] Liing Lowering. Layer. Layer. Layer. Layer Rope diaeter /8" / Rope Layer Speeds []/[] Pulling Unwinding. Layer. Layer. Layer. Layer Load condition []/[] 0 00/00 00/ /500. /.9. /..8 / / 5.8 /. 8. /.8.8 / 7.. /. 9.0 / / / / 5.9. / /. Load condition []/[] 0 00/00 00/000 00/000. /.9. /..8 / 7.. /. /. 8. /.8.8 / 7.. /. 5. / 5.9 HARATERISTI LOA URVES PROFI LIFTER 0-, / PROFI PULLER 0-, Rope pulling force [kn] [lbf] PROFI LIFTER 000-, / PROFI PULLER 000-, Rope pulling force [kn] [lbf] Noinal pressure PSI / bar Rope diaeter /8" / last rope layer first rope layer first rope layer PROFI LIFTER 0-, PROFI PULLER 0-, last rope layer Noinal pressure PSI / bar Rope diaeter /" / last rope layer first rope layer first rope layer PROFI LIFTER 000-, PROFI PULLER 000-, last rope layer Lowering Rope speeds [] [] Pulling / Liing *Option Lowering Rope speeds [] [] Pulling / Liing 9

21 JN AIR WINHES PROFI PROFI LIFTER 0-, / 000-, PROFI PULLER 0-, / 000-, ROPE APAITIES PROFI LIFTER 0-, and PROFI PULLER 0-, PROFI LIFTER 0-, and PROFI PULLER 0-, Short dru Long dru Full used rope layer Rope diaeter 5/ /8 7/ Full used rope layer Rope diaeter 5/ /8 7/ st / 57.8 / /. 0.5 /. st /.7 / / 87.5 /.7 st and nd /. / / / 9. st and nd /. /. 0.9 / / 59. st, nd and rd / 09. /.8 7. / / 7. st, nd and rd /. / / / 9. st, nd, rd and th / 9. / / 7 9. /.9 st, nd, rd and th / 57.9 / / 8..5 /.8 Recoended rope diaeter: /8" / 9 up to Rope diaeter for rope drus with grooving: /8" / PROFI LIFTER 000-, and PROFI PULLER 000-, PROFI LIFTER 000-, and PROFI PULLER 000-, Short dru Long dru Full used rope layer Rope diaeter /8 7/ / Full used rope layer Rope diaeter /8 7/ / st / 8. / / / 8.5 st / 09.8 / / / 7.8 st and nd /.7 / / /.7 st and nd / 7.0 /..9 / /.7 st, nd and rd / 9. / / / 8.7 st, nd and rd / 98.7 / / /.0 st, nd, rd and th / 09. /.8 5. / / 9.7 st, nd, rd and th / 9.9 / / / 8.7 Recoended rope diaeter: /" / Rope diaeter for rope drus with grooving: /" / L H IMENSIONS []/[] PROFI LIFTER 0-, PROFI PULLER 0-, Short dru Long dru PROFI LIFTER 000-, PROFI PULLER 000-, Short dru Long dru B A L B / / 75 H a.. / 50. / 590 L a. L.0 / / 0.9 / 7. / 7. / / 05. / / 705 A 9.5 / 0. /.8 / 50.9 / 0 A. / 95. / 0 A. / 0. / / 9. / 89 0

22 JN AIR WINHES PROFI Special winch applications We have prepared coprehensive inforation regarding this subject on our web site for your detailed inforation. However this page contains an ecerpt for eaple purposes. For the full inforation, including a download option, please visit

23 JN AIR WINHES PROFI PROFI LIFTER 0- / 000- PROFI PULLER 0- / 000- With increased otor power ( kw) for high rope speeds TEHNIAL ATA JN Liing and pulling winches are anufactured with a highly durable steel structure in liing capacities of 0 and 000 and pulling capacities of 0 and 000. THE AVANTAGES AT A GLANE Increased otor power for high rope speeds. ru integrated ehaust air cooled planetary gearbo for iniu aintenance and aiu reliability at a 0 % duty cycle. Long dru version offering increased rope capacity with layer spooling. Ideal ratio of dru/rope diaeter (/d=) ensures a long duty cycle of the rope. Variable speeds, easy to install, low noise level. Integrated overload protection. Ideal for applications in hazardous areas. Standard odels: II G IIA T(X) / II G IIB T(X) With increased spark protection: II G IIB T(X). Various options. Noinal pressure (required static pressure) apacity (noinal load for liing winches) in the last layer Pulling capacity (noinal load for Pulling winches) in the first layer Ma. nuber of rope layers Ma. otor power Liing/pulling speed without load Liing/pulling speed at % of the noainal load Liing/pulling speed at noinal load Lowering/unwinding speed without load Lowering speed at noinal load Air connection Air consuption at noinal load - pulling Air consuption at noinal load - liing Air consuption without load - pulling Air consuption without load - liing Air consuption without load - lowering Air consuption at noinal load - lowering Hose size (ø inside) Rope dru diaeter Ma. possible rope diaeter Miniu breaking force of rope Weight (without rope and additional devices) ontrol length for pendant control Noise level without load - liing or pulling Noise level without load - lowering or unwinding Noise level at noinal load - liing or pulling Noise level at noinal load - lowering PSI bar kw /in /in /in /in /in /in lbf kn PROFI LIFTER G / PROFI LIFTER G / PROFI PULLER G / PROFI PULLER G / Group echanis: M () Measured in the first layer with a. rope diaeter Standard version with long dru Measured at distance according to IN 55 part 0

24 JN AIR WINHES PROFI PERFORMANE ATA PROFI PULLER 000- with wire rope* PROFI PULLER 000- with wire rope* and dru guard** PROFI LIFTER 0- PROFI PULLER 0- Rope diaeter /8" / Rope Layer Speeds []/[] Liing Lowering. Layer. Layer. Layer. Layer Rope diaeter /8" / Rope Layer Speeds []/[] Pulling Unwinding. Layer. Layer. Layer. Layer Load condition []/[] 0 0 / 00 00/0 00/ / / 9. / 0.9. / 8..5 / / /. 8.0 / 79. /. 9. / / / 5.7. /..0 /.8 Load condition []/[] 0 0 / 00 00/0 000/ / / 9. / /..5 / / /. 8.0 / 8. / 5.7 PROFI LIFTER 000- PROFI PULLER 000- Rope diaeter /" / Rope Layer Speeds []/[] Liing Lowering. Layer. Layer. Layer. Layer Rope diaeter /" / Rope Layer Speeds []/[] Pulling Unwinding. Layer. Layer. Layer. Layer Load condition []/[] 0 00/00 00/ /500. / /..8 /. 8.8 /.8. /.5.5 / /.8.5 / / / / /. 5.9 / /.8 Load condition []/[] 0 00/00 00/000 00/000. / /..8 /..9 /.. / 5..5 / /.8.5 /.9 5. /. HARATERISTI LOA URVES PROFI LIFTER 0- / PROFI PULLER 0- Rope pulling force [kn] [lbf] PROFI LIFTER 000- / PROFI PULLER 000- Rope pulling force [kn] [lbf] Noinal pressure PSI / bar Rope diaeter /8" / 0 9 PROFI LIFTER 0- PROFI PULLER 0- Noinal pressure PSI / bar Rope diaeter /" / PROFI LIFTER 000- PROFI PULLER 000- first rope layer last rope layer first rope layer last rope layer last rope layer 5 first rope layer last rope layer 8 5 first rope layer Lowering Rope speeds [] Pulling / Liing [] Lowering Rope speeds [] [] Pulling / Liing *Option **Standard in E version

25 JN AIR WINHES PROFI PROFI LIFTER 0- / 000- PROFI PULLER 0- / 000- ROPE APAITIES PROFI LIFTER 0- and PROFI PULLER 0- Ma rope capacity per layer 5/ Rope diaeter /8 7/ st st and nd st, nd and rd st, nd, rd and th / / / /.7 / 7.. /.. / / / 0.9 / / / / / / 9..5 /.8 Recoended rope diaeter: /8" / 9 up to Rope diaeter for rope drus with grooving: /8" / PROFI LIFTER 000- and PROFI PULLER 000- Ma rope capacity per layer /8 Rope diaeter 7/ / st st and nd st, nd and rd st, nd, rd and th / / / / 09.8 / / / / / / /.0 8. / / / / / 8.7 Recoended rope diaeter: /" / Rope diaeter for rope drus with grooving: /" / L A A IMENSIONS []/[] PROFI LIFTER 0- PROFI PULLER 0- PROFI LIFTER 000- PROFI PULLER 000- B H a. L a. / 9 9. / 7 9. / / 75. / / 5. / 7.8 / / 0. /.8 / 50.9 / 0. / 95. / 0 0. / 5. / 89 H L B L A A

26 JN AIR WINHES PROFI Equipent, Options and Accessories Equipent LIFTER 500- PULLER 0- LIFTER 500-, LIFTER 0-, LIFTER 0-, PULLER 0-, LIFTER 000-, PULLER 000-, LIFTER 0- PULLER 0- LIFTER 000- PULLER 000- Lever Standard FI Option ontrols E Option F Standard S Option Eergency stop Standard Standard Standard Overload protection ru guard Standard Standard Standard Free-spooling clutch Standard Option Standard Pressure roller Rope dru with grooving Option Option Long dru on request Option Standard Slack rope detector on request nd rope-end fastening Option Liit switch syste Option Pulling frae Option Option Eergency lowering device Option Offshore painting Splitted rope dru Option Option Only with E-, FI- und F control When operating as pulling winch Option with lever control Standard in E version 5

27 JN BIG BAG HANLING AIR HOISTS BBH 00 and BBH 000 JN BIG BAG HANLING AIR HOISTS For big bag handling J.. Neuhaus offers innovative design solutions to eet the special requireents of these applications. JN Big Bag Handling Air Hoists are available in carrying capacities of 00 and 000 with an air pressure of bar. ESIGNS WITH ONE OR TWO LOA HOOKS With one load hook for standard crucifor liing bea designs. The etended distance between the hook and the chain bo is particularly advantageous. This guarantees that there is no risk of collision between the load and the chain bo. With twin load hooks for ore cople crucifor liing bea designs or for standard liing bea designs with two suspension points. THE AVANTAGES AT A GLANE Particularly suited for use as big bag handling hoists and for the oveent of all kinds of bulky loads due to the low headroo design. opact, odern design. Suitable for use as a synchronised hoist in twin-hook design. The use of JN standard coponents guarantees reliable operation and cost effective anufacture. No additional otor lubrication required. Sall nuber of aintenance/wear free oving parts. hain bo included as standard. Suitable for a wide variety of bea sizes/profiles, with hook centres to suit your requireents. Take advantage of copressed air as the driving ediu: Suitable for use as standard in areas at risk of eplosion. Eplosion protection classification according to irective 9/9/EG (Equipent and Protective Systes Intended for use in Potentially Eplosive Areas (ATEX)). The hoists are available for the following eplosion protection classifications: II G IIA T(X) / II G IIB T(X), II G IIB T(X) or II G II T(X). 0 % duty rating, and thus no downties. TEHNIAL ATA Nuber of hooks Air pressure arrying capacity Nuber of chain strands Engine output hoist Engine output trolley Liing speed at full load Liing speed without load Lowering speed at full load Air consuption at full load liing Air consuption at full load lowering Air consuption at full load trolley Air connection Hose diension (Ø inside) Weight at standard li and iniu k diension hain diension Weight of chain Standard li Length of control at standard load li Noise level at full load liing Noise level at full load lowering Noise level at full load trolley PSI bar t kw kw /in /in /in Group echanis: M (A) Measured at distance acc. to IN 55 part 0 BBH G / BBH A B b E F G H J K L M N P R t IMENSIONS in. a. in. a. a. BBH 00- BBH /8.7 /

28 JN BIG BAG HANLING AIR HOISTS N P R Z H G F t BBH 00- BBH 00- A b B E N P R E H G F M M M Z J K J K L X Y Y IMENSIONS TEHNIAL ATA Nuber of hooks Air pressure arrying capacity Nuber of chain strands Engine output hoist Engine output trolley Liing speed at full load Liing speed without load Lowering speed at full load Air consuption at full load liing Air consuption at full load lowering Air consuption at full load trolley Air connection Hose diension (Ø inside) Weight at standard li and iniu k diension hain diension Weight of chain Standard li Length of control at standard load li Noise level at full load liing Noise level at full load lowering Noise level at full load trolley PSI bar t kw kw /in /in /in Group echanis: M (A) Measured at distance acc. to IN 55 part 0 BBH G / BBH A B b E F G H J K L M N P R t in. a. in. a. a. BBH 00- BBH /8.7 /

29 JN LOW HEAROOM TROLLEYS The trolley solution for restricted headroo areas. arrying capacities: fro 0.5 t up to. t Where headroo is restricted and standard trolleys can't eet the liing height requireents we recoend JN Low Headroo Trolleys whereby our air hoists are horizontally ounted. When only very low headroo is available we recoend JN Ultra-Low Monorail Hoist design. STANAR FEATURES State of the art design utilising JN's new PROFI TI otor technology Sall nuber of aintenance/wear free oving parts No additional otor lubrication required -step travelling speed Adjustable trolley widths to suit your requireents (please contact us for details) SPEIAL FEATURES Able to negotiate curves Etended trolley tie bars for bulky or elongated loads 8 Low Headroo Trolley LMF TEHNIAL ATA Hoist Trolley arrying capacity Nuber of chain strands Motor output Hoist Motor output Trolley Air pressure Liing speed at full load Liing speed without load Lowering speed at full load Travelling speed at full load Air consuption at full load liing Air consuption at full load lowering Air consuption trolley otor Air connection Hose diension (Ø inside) Weight with standard li height and control length hain diension Weight of chain Standard li Length of control at standard li Ma. botto flange thickness t Ma. botto flange width b Min. botto flange width b Noise level at full load - liing Noise level at full load - lowering t kw kw PSI bar /in /in /in / / *st step at F-control with -step travelling speed Measured at distance acc. to IN 55 part 0 PROFI 05 TI LMF 05- t */5.9 9*/ G / PROFI TI LMF 05- t */5.9 9*/ G / PROFI TI LMF 05- t */5.9 9*/ G / PROFI TI LMF. t */5.9 9*/ G / PROFI TI LMF. t */5.9 9*/ G /

30 JN LOW HEAROOM TROLLEYS L E A b + B b E H J G G M F K N K IMENSIONS Hoist Trolley A a. B b in. E E F G G H in. J K K L M N t a. PROFI 05 TI LMF 05- t PROFI TI LMF 05- t PROFI TI LMF 05- t PROFI TI LMF. t PROFI TI LMF. t

31 JN ULTRA-LOW MONORAIL HOISTS arrying capacities: t up to 0 t Air pressure: bar Where loads have to be lied and transported in etreely reduced spaces the JN Ultra-Low Monorail Hoists provide the ideal solution. For eaple the Ultra-Low Monorail Hoist with a load capacity of t has a headroo of only 0. STANAR FEATURES Ideally suited for working in hazardous areas (eplosion risk). JN Ultra-Low Monorail Hoists UH are insensitive to huidity, dust and teperatures fro -0 up to +70. Etreely low headroo. Low air consuption. Available with increased spark protection. TEHNIAL ATA UH 0 arrying capacity Nuber of chain strands Motor output Air pressure Liing speed at full load Liing speed without load Lowering speed at full load Air consuption liing full load Air consuption lowering full load Air connection Hose diension (Ø inside) Weight with standard li height and control length hain diension Weight of chain Standard li Length of control at standard li Noise level at full load - liing Noise level at full load - lowering t kw PSI bar /in /in UH G / UH G / UH G / UH G / UH G / Group echanis: M (B) Technical data for higher capacities on request. Measured at distance acc. to IN 55 part 0 0

32 JN ULTRA-LOW MONORAIL HOISTS L E A b + B b H K J G t a = 0 M F N IMENSIONS A B E F G H in. 50 < =b < = H in. 50 < =b < =0 H in. 0 < =b < = J K L M N UH Technical data for higher capacities on request. UH UH UH UH

33 JN MONORAIL AIR HOISTS arrying capacities: t up to 5 t per unit JN Monorail Hoists are available with air or hydraulic drive for the offshore industry, or wherever heavy loads have to be oved in reduced spaces. epending on the application JN Monorail Hoists can be used in tande. For eaple: Working in parallel for handling BOP handling systes. Working in tande and connected by a tie bar for handling grinding rollers in the ceent industry. SPEIAL EXEUTIONS If you cannot find the correct hoisting syste to suit your application in our standard prograe then Non standard designs to suit your particular application are our speciality. K A b + B b E STANAR FEATURES Ideally suited for working in hazardous areas (eplosion risk). Insensitive to huidity, dust and teperatures fro -0 up to +70. Low headroo, copact design. Low air consuption. World wide service. H F TEHNIAL ETAILS J G Instant starting vane otor requiring low aintenance L M Fail safe isc brake iediately holds load safely in the event of interruption of air supply All gearbo coponents ade of tepered or hardened high-grade steels Anti-clib and anti-drop devices Lateral guiding plates Pendant ontrol unit with eergency shut-off valve AESSORIES Increased spark protection Rack and pinion drive Overload protection Two speed trolley travel control Filter silencer Third party acceptance by NV, ABS or Lloyds Register of shipping etc, available on request. IMENSIONS A a. EH. 5 EH 5. B E F* G H.7 5 J K L M *hain containers increase the hoist headroo EH EH EH EH EH EH

34 JN MONORAIL AIR HOISTS EH 0 EH 50 EH 0 TEHNIAL ATA arrying capacity Nuber of chain strands Motor output Trolley Motor output Hoist Air pressure Liing speed at full load Liing speed without load Lowering speed at full load Travelling speed at full load Travelling speed without load Air consuption Trolley Air consuption Hoist Air connection Hose diension (Ø inside) Weight with standard li height and control length hain diension Weight of chain Standard li Length of control at standard li Noise level at full load with standard silencer liing Noise level at full load with standard silencer lowering t kw kw PSI bar / / / / / /in /in EH G / Group echanis: EH - EH 50 M (B), EH 75 and EH 0 M () Measured at distance acc. to IN 55 part 0 EH G / EH G / EH G / EH G / EH G / EH G / EH G /

35 JN HYRAULI HOISTS AN MONORAIL HOISTS HYRAULI HOISTS PROFI HYRAULI MONORAIL HOISTS arrying capacities: up to 0 t The alternative to air hoists: JN Hydraulic Hoists and Hydraulic Monorail Hoists with carrying capacities up to 0 t. epending on otor size these hoists work with an intake pressure of 0 bar up to bar. Pressure fluids: Oil or flae resistant fluids HF. Our Hydraulic hoists can be deployed as an alternative to air driven units in all places where hydraulic lines, central hydraulic systes or hydraulic power supplies eist. AVANTAGES Ideal for applications in eplosion risk areas Sensitive, infinitely variable speed control of liing/lowering and travelling otions Etreely low noise eissions Fully enclosed highly robust gear otor Integrated overload protection Only two supply connections at hoist P and T, leakage oil drained internally ontrolled load-lowering up to 0 t carrying capacities in the event of oil supply failure TEHNIAL ATA PROFI TI-H TI-H TI-H TI-H TI-H 0 TI-H arrying capacity t.. 0 No. of chain strands Motor type KM / KM / KM / KM / KM / Motor output kw Intake pressure PSI bar Intake volue l/in Liing speed - full load Liing speed without load Lowering speed - full load Lowering speed without load onnection G / G / G / G / G / Hose diension N N N N N Weight with standard li height and control length hain diension Weight of chain / / Standard li Length of control at standard li Group echanis: M (B)

36 JN HYRAULI HOISTS AN MONORAIL HOISTS JN HYRAULI HOISTS PROFI TI-H - 0 TI-H IMENSIONS TI-H TI-H A sallest headroo B E E F hain containers increase the hoist headroo TI-H TI-H TI-H G E B A E F 5

37 JN HYRAULI HOISTS AN MONORAIL HOISTS HYRAULI HOISTS PROFI 5 TI-H - 0 TI-H TEHNIAL ATA apacity Nuber of chain strands Motor output Motor type Intake pressure Intake volue Liing speed at rated load Liing speed without load Lowering speed at rated load Lowering speed without load onnection Hose diension Weight with standard li height and control length hain diension Weight of chain Standard li Length of control with standard li t kw PSI bar l/in / / 5 TI-H 5 KM / G / N TI-H 7.5 KM / G / N Group echanis: PROFI 5TI-H - PROFI 50TI-H M (B), PROFI 0TI-H M () 50 TI-H 50 KM / G / N TI-H 0 KM / G / N IMENSIONS G A sallest headroo B E E F G 5 TI-H TI-H TI-H TI-H E B A hain containers increase the hoist headroo E F

38 JN HYRAULI HOISTS AN MONORAIL HOISTS HYRAULI MONORAIL HOISTS EH 0-H - 0-H TEHNIAL ATA apacity Nuber of chain strands Motor output Trolley Motor output Hoist Motor type Trolley Motor type Hoist Intake pressure Intake volue Liing speed at rated load Liing speed without load Lowering speed at rated load Lowering speed without load Travelling speed at rated load onnection Hose diension Weight with standard li height and control length hain diension Weight of chain Standard li Length of control with standard li t kw kw PSI bar l/in / / EH 0-H 0.5 KM/ KM/8-KM/ 0./50 /0 /. 0/ G / N EH 5-H 5. KM/ KM / G / N EH 7-H 7.5. KM/ KM / G / N Group echanis: EH 0-H - EH 50-H M (B), EH 75-H and EH 0-H M () EH 50-H 50. KM/ KM / G / N EH 75-H 75.8 KM/ KM / G / N EH 0-H 0.8 KM/ KM / G / N EH 5-H EH 0-H IMENSIONS A B E F G H J K L M EH 0-H EH 5-H EH 7-H hain containers increase the hoist headroo EH 50-H EH 75-H EH 0-H K J H E F A L b + B G b M 7

39 JN AIR RANES / RANE KITS JN Air ranes in standard version are suitable for working in hazardous areas. The delivery prograe coprises eplosionproof Top running overhead travelling cranes Under hung overhead travelling cranes Jib cranes which can be designed to your individual needs, custoised installations are our speciality. epending on your requireents JN air hoists in otor trolleys or onorail hoist systes are integrated into the crane design. An ergonoically designed pneuatic pendant control is supplied with two speed control as standard for crane and trolley travel. Infinitely variable hoist and trolley speed control is also available. ifferent JN ranes in etail Overhead cranes with single or double girder design Underhung cranes including low headroo design Jib cranes ranes with in line echanically linked synchronised hoists ranes with parallel operating hoists arrying capacities up to 50 t rane spans up to 8 JN RANE KITS FOR EXPLOSION-PROOF AIR RANES arrying capacities: up to t J.. Neuhaus can offer crane anufacturers crane coponent kits coplete with pneuatic crane drives. With these crane kits overhead travelling cranes up to t capacity can be built very siply and econoically, especially for applications in hazardous areas. The crane anufacturer provides the ain girder and JN delivers all the coponents that are necessary to build an air powered crane of their chosen design: End carriages with pneuatic drives Energy feeding systes Safety accessories And of course the appropriate air hoist with trolley TEHNIAL ATA Load capacity t t t t t 5 t 0 t t 0 t 50 t Main travel (crane) ross travel (trolley) a. speed control a. speed control a. speed [] [] 7/0 7/0 7/0 7/0 7/0 5/5 5/5 5/5 5/5 5/5 -steps [] 9/ 9/ 9/ 9/ 5/ 5/ 5/ 5/ 5/ 5/ -steps variable liing/lowering 5/.5/.5/8.5.5/.5.0/.0 /.5 0.5/. 0./. /. 0.5/. = Standard + = Option (speeds under standard conditions) Hoist -step control variable

40 JN RATHET HOISTS WITT arrying capacities:.5 t,.5 t The WITT is designed for for liing, pulling, tensioning or anchoring operations under all working positions. It has a robust cast iron housing and is etreely resistant to adverse working conditions. Technically the WITT distinguishes itself by a totally enclosed planetary gear. All rotating parts have ball, needle or slide bearings. The WITT is a proven device for oving and positioning heavy achinery, for tensioning heavy loads during transport, for positioning various heavy profiles and for any other operations. TEHNIAL ATA arrying capacity Nuber of falls Li per ratchet rotation Lever force at full load Weight without chain Total weight Weight of chain hain diension Standard li IMENSIONS t WITT,5t WITT,5t WITT,5t WITT,5t A sallest headroo B E F G H

41 JN ONTROLS The following sybols indicate the various control options available for JN equipent for JN Air Hoists for JN Air Winches ROPE ONTROL Suitable For Any ontrol Length: This control type provides infinitely speed control for hoist liing and lowering otions and is suitable for any required control length. The rope control option is available for all PROFI series hoists up to 5 t carrying capacity. For larger capacity PROFI series hoists 7 TI, 50 TI and 0 TI the rope is replaced by a pull chain for greater strength. LEVER ONTROL For JN Air Winches: With the hand lever control, loads can be oved safely in a precise anner and at variable speeds. The direction of oveent of the lever corresponds to the direction of rotation of the rope dru. When released, the lever returns autoatically to the centre position. FI-ONTROL Sensitive control, for easy handling: The FI-ontrol provides precise infinitely variable speed control and the ergonoically designed synthetic housing ensures cofortable handling for the operator. The use of corrosion resistant aterials akes it suitable for use in aggressive atospheres, with the control hoses enclosed in an outer sheath which protects the fro eternal conditions. 0

42 JN ONTROLS E-ONTROL Low aintenance, corrosion-proof: The very robust brass construction distinguishes the E-type pendant control valve. Low weight and ergonoic design ensure ease of handling. Only available in single speed control version. F-ONTROL Available For Multi-Function Use: The F-control is anufactured fro an unbreakable synthetic aterial, resistant to eternal conditions. The ergonoically designed housing ensures ease of handling. Up to 8 different control functions can be incorporated in a single pendant control e.g key switch, two stage travelling speed, klaon or siultaneous control of two hoist otors. As an option the F-control can also be delivered with infinitely variable speed control of hoisting and trolley travelling otions. ONTROLS FOR JN AIR HOISTS IN MOTOR TROLLEY AN JN MONORAIL HOISTS For controlling JN air hoists in otor trolleys and JN onorail hoists we recoend the four button version of the E or F-control. The rope control option is also available. ONTROLS FOR JN AIR WINHES Our winches are easy to operate, with an infinitely variable speed lever type control at the winch or via a two button version E-control or the twin lever FI-type pendant controls. As an added safety feature the controls are available with a ain air eergency shut-off valve. ONTROLS FOR JN AIR RANES For controlling JN air cranes the F-control is the ost suitable because of it's ulti-function capability. OPERATING ONVENIENE VIA RAIO ONTROL To overcoe ecessive distances between operator and crane, or to use hoisting equipent in reote areas, the JN Radio ontrol offers a convenient and safe alternative to other control types. The JN radio control is also available in eplosion-proof design.

43 JN AESSORIES / EXPLOSION-PROOFNESS AESSORIES Spiral hose up to / 0 trolley drive Not for use in category II (Zone ) or eplosion group II applications Energy supply by Square bar (suitable for curved beas) consisting of: square track with towing ar, anti-static air supply hose, hose trolley, horizontal support bracket and clap. The horizontal support bracket is designed to be claped to the top flange of the runway bea. Alternative fiing ethods are available on request. Energy supply by -rail consisting of: -rail with horizontal support bracket, clap, antistatic air supply hose and hose trolley. The horizontal support bracket is designed to be claped to the top flange of the runway bea. Alternative fiing ethods are available on request. Lubricator Filter silencer Filter regulator Grease cartridge for oil-free otor operation, 50 l, Art. No. 90 Booster Valve (for use above pendant control length) Pneuatic liit switch for liing and travelling otions Etended Pendant control ar opper plated load hook for increased non sparking protection (included as standard in Zone and II specification) Stainless steel load hook (up to / tonne carrying capacity) Stainless steel load chain up to TI (load carrying capacity is reduced, details on request) Reote control (for cranes, hoists and trolleys) Electropneuatic interface Manual eergency lowering device for PROFI hoists - 0 TI and LIFTER 0 winch and above Hydraulic drives Product training Further accessories, available on request JN AIR HOISTS EXPLOSION-PROOFNESS LASSIFIATION AN MARKING JN Air Hoists, Winches and ranes are - as opposed to standard electrically operated products - suitable for application in hazardous areas as the driving ediu air (unlike electricity) does not produce any ignition risk. JN Air Hoists and ranes Standard Versions: II G IIA T(X) / II G IIB T(X) With increased non sparking protection (botto block and load hook with safety catch feature galvanised copper plated finish): II G IIB T(X) With increased non sparking protection for eplosion group II (additionally the running wheels and hand gear echanis of trolleys and travelling gears are ade of bronze): II G II T(X) JN General duty ini series Air Hoists: II G IIA T(X) JN Air Winches PROFI LIFTER 0 / 000 and PROFI PULLER 0 / 000 Standard Versions: II G IIA T(X) / II G IIB T(X) With increased non sparking protection (For these versions harnesses with special corrosion protection are available. The rope-end fastenings for the load hook and the load hook itself are copper-plated, the rope is galvanized and copressed.): II G IIB T(X) JN Air Winches PROFI LIFTER 500 / 0 and PROFI PULLER 0 II G IIA T(X) Note: In the service section on our hoepage under you will find scaled drawings in / forat for download and linking in you A drawing.

44 JN QUALITY OUR AVANTAGE IS OUR QUALITY In 99 our quality anageent syste was originally certified to ISO 900 by et Norske Veritas. It is a focus of our coitent towards continuous iproveent, and involves all of our processes. In our quality anual all our procedures and their systeatic integration throughout the entire copany are defined. In addition we have internal quality teas engaged in continuous iproveent processes based on the Kaizen philosophy. Our A based design syste follows detailed catalogues with defined quality standards. Based on the ost up to date knowledge and technology, coupled with intensive R &, we have copletely re-designed the entire Profi series of hoists and accessories over the past years. In our goods received departent corresponding controls and inspection procedures have been ipleented to ensure our suppliers eet agreed quality standards. Regular controls of stock levels and production planning logistics guarantee the optiu supply of aterials and parts for production and consequently the achieveent of agreed delivery ties. Our production processes follow defined quality plans. This ensures the sooth flow of parts through all centres of production and assebly. Where required the quality plan includes parts identification/arking to allow 0 % traceability through our production syste. Our quality control procedures include all achining processes as well as regular rando saple checks on the production line. oputer controlled precision easuring achines guarantee correct tolerances and continuous high quality. All easuring instruents are checked and re-calibrated periodically. Aer final assebly we carryout a 0 % function check and load test of each unit before delivery. With our trained service tea we offer thorough product knowledge and support to our custoers. All repair and service work is carried out according to defined check lists. Our quality ensures your safety - there is no coproise.

45 JN OMPANY PORTRAIT OL ENOUGH TO STAY YOUNG What sounds like a contradiction bears a lot of truth. The best thing about eories is that you can create new ones every day. In business since 75 to the present day, with over 0 years of eperience, and being faily owned and anaged for 7 generations we are stronger then ever before. Our philosophy has endured all econoic and technological changes, all political and social upheavals. We have always eerged stronger and sure of our success. Perhaps due to a few siple principles: We always ai to offer what our custoers require to ove goods and aterials easily and safely. This principle was established when our copany was founded in 75, to supply jacks of the utost quality and reliability. Today this is still valid fro our air hoists to coplete eplosion-proof crane systes. Based on copressed air power we develop and offer solutions for alost any aterial handling challenge. Planning, design, anufacturing, custoer service - an all encopassing quality anageent syste that is not just certified by NV. Of equal iportance is that each eployee takes his responsibility with utost seriousness and lives our quality ideal. 5 people in our ain offices in Witten live and work according to this otto. The sae applies to the any eployees of our subsidiaries in France, Great Britain, Singapore and the USA. Our global operation with eclusive worldwide partners provides representation in over 90 countries. Our eport ratio is over 0 %, reaching custoers in ore then 70 different industries. MAIN OFFIE J.. NEUHAUS GbH & o. KG Gerany AUGHTER OMPANIES J.. NEUHAUS Sarl. France J.. NEUHAUS Pte. Ltd. Singapore J.. NEUHAUS Ltd. UK J.. NEUHAUS L.P. USA JN hoists can be found on offshore drilling rigs, in a ultitude of industries on dry land and deep underground in ining operations. In short - wherever they are needed. Furtherore we are always indful of the origins of our business. The history of liing equipent fro the Stone Age through to the st century is well docuented in our on site useus. Using air power is safe, and unlike electricity it does not create any sparks. With the eception of the spark that ignites the agic of fascinating technology and our total devotion to quality for the benefit of our custoers.