NABOO A ++ A + A. EU Regulation 874/ Illumination equipment energy classes. Naboo. .0 Inox. Recessed ground fitting

Transcription

1

2 67 NABOO Round luinaire for installation in-ground recessed. Configuration: three sizes available. Die-cast aluiniu structure and heat sink, EN AB alloy (low copper content). AISI 316L stainless steel outer frae. Glass diffuser: transparent with silkscreen border. Double layer coating for high resistance to corrosion: the aluiniu coponents are painted with a double coat using powders which are copliant with QUALICOAT standards: a first layer of epoxy powder (with excellent cheical and echanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atospheric agents). The entire painting process of the aluiniu fitting starts fro coponents which have been sandblasted in advance to ake the surface ore porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces copletely, then rinses with deineralised water to reove any residue particles, subsequently a cheical conversion treatent is done to protect against rusting. Light Eission: Fully adjustable optic, different beas Protection rating: IP67 In copliance with EN standards Class of insulation: II Installation: the luinaire is equipped with a watertight M1 screw-connector providing optial insulation against water ingress and quick connection to the power supply unit (supplied with the luinaire as a reote IP67 Kit with electronic power supply). The power supply unit is equipped with a piece of cable of 400 with screw connector towards the luinaire and a piece of cable of 300 to be used for wiring. Outdoor use requires suitable flexible cables. Installation requires a dedicated box to be ordered separately. It is iportant to provide a >300 gravel layer or a drain syste (for concrete surface) to ensure good drainage and to avoid water stagnation. We recoend the use of a connection syste with a protection degree greater than or equal to the protection degree of the luinaire. EU Regulation 874/01 - Illuination equipent energy classes A ++ A + A.0 Inox HO STOP 50N 5kN LED VERSION: Class A/A+/A++ Luinaire supplied with integrated LED odules that cannot be replaced Recessed ground fitting Do not install in hollow areas Protection against water ingress fro the cable Drive over Protection against ipact IK 09-10,00 joule kg Installation requires a 30c water drainage layer (gravel) Pre-wired with approx 50 of cable Static load: 000Kg walk over Glass surface teperature <70 C 7

3 Adjustent on the horizontal axis: ax 0 ax

4 Rotation around the vertical axis: ax ax ax

5 145 Power LED / Adjustable Optic - Narrow Bea A A + A ++ 6W/0 40V l LED 630 l OUTPUT cd / 1000 l = = Ø A A + A ++ 6W/0 40V l LED 547 l OUTPUT Power LED / Adjustable Optic - Mediu Bea A A + A ++ 6W/0 40V l LED 630 l OUTPUT cd / 1000 l = = Ø A A + A ++ 6W/0 40V l LED 547 l OUTPUT Power LED / Adjustable Optic - Wide Bea A A + A ++ 6W/0 40V l LED 630 l OUTPUT cd / 1000 l = = Ø A A + A ++ 6W/0 40V l LED 547 l OUTPUT

6 145 Power LED / Adjustable Optic - Asyetric Optic 65 x A A + A ++ 6W/0 40V l LED 630 l OUTPUT cd / 1000 l = = Ø x A A + A ++ 6W/0 40V l LED 547 l OUTPUT / Adjustable Optic - Narrow Bea A A + A ++ 6W/0 40V Total power 9W l LED 959 l OUTPUT cd / 1000 l = = Ø A A + A ++ 6W/0 40V Total power 9W l LED 9 l OUTPUT / Adjustable Optic - Wide Bea A A + A ++ 6W/0 40V Total power 9W l LED 959 l OUTPUT cd / 1000 l = = Ø A A + A ++ 6W/0 40V Total power 9W l LED 9 l OUTPUT

7 5 Power LED / Adjustable Optic - Narrow Bea A A + A ++ s 16,8W/0 40V Total power 1W l LED 1935 l OUTPUT cd / 1000 l = = Ø x A A + A ++ s 16,8W/0 40V Total power 1W l LED 1818 l OUTPUT Power LED / Adjustable Optic - Mediu Bea A A + A ++ s 16,8W/0 40V Total power 1W l LED 1935 l OUTPUT cd / 1000 l = = Ø x A A + A ++ s 16,8W/0 40V Total power 1W l LED 1818 l OUTPUT 17 5 Power LED / Adjustable Optic - Wide Bea A A + A ++ s 16,8W/0 40V Total power 1W l LED 1935 l OUTPUT cd / 1000 l = = Ø x A A + A ++ s 16,8W/0 40V Total power 1W l LED 1818 l OUTPUT

8 5 Power LED / Adjustable Optic - Asyetric Optic 65 x A A + A ++ s 16,8W/0 40V Total power 1W l LED 1935 l OUTPUT cd / 1000 l = = Ø x54 6x A A + A ++ s 16,8W/0 40V Total power 1W l LED 1818 l OUTPUT / Adjustable Optic - Narrow Bea A A + A ++ 17W/0 40V Total power 1W l LED 533 l OUTPUT cd / 1000 l = = Ø A A + A ++ 17W/0 40V Total power 1W l LED 415 l OUTPUT / Adjustable Optic - Mediu Bea A A + A ++ 17W/0 40V Total power 1W l LED 533 l OUTPUT cd / 1000 l = = Ø A A + A ++ 17W/0 40V Total power 1W l LED 415 l OUTPUT

9 90 Power LED / Adjustable Optic - Narrow Bea A A + A ++ s 33,5W/0 40V l LED 3871 l OUTPUT cd / 1000 l = = Ø A A + A ++ s 33,5W/0 40V l LED 3636 l OUTPUT Power LED / Adjustable Optic - Mediu Bea A A + A ++ s 33,5W/0 40V l LED 3871 l OUTPUT cd / 1000 l = = Ø A A + A ++ s 33,5W/0 40V l LED 3636 l OUTPUT Power LED / Adjustable Optic - Wide Bea A A + A ++ s 33,5W/0 40V l LED 3871 l OUTPUT cd / 1000 l = = Ø A A + A ++ s 33,5W/0 40V l LED 3636 l OUTPUT

10 90 Power LED / Adjustable Optic - Asyetric Optic 65 x A A + A ++ s 33,5W/0 40V l LED 3871 l OUTPUT cd / 1000 l = = Ø x A A + A ++ s 33,5W/0 40V l LED 3636 l OUTPUT ax 90 / Adjustable Optic - Mediu Bea A A + A ++ 3W/0 40V Total power 38W l LED 4496 l OUTPUT cd / 1000 l = = Ø A A + A ++ 3W/0 40V Total power 38W l LED 4385 l OUTPUT

11 36

12 Accessories: 188 BOX FOR INSTALLATION Ø 10 x H BOX FOR INSTALLATION Ø x H BOX FOR INSTALLATION Ø 86 x H 80 Ø 14 Ø Ø Ø /4 WAY TERMINAL BLOCK 3 POLES IP68 HO STOP (Ø5,5 1 CABLE) WAY TERMINAL BLOCK 3 POLES IP68 HO STOP (Ø5,5 1 CABLE) Ø 37 SPD: (SURGE PROTECTION DEVICE) 75Vac MAXIMUM DISCHARGE CURRENT 10KA (8/0µs) MAXIMUM OPERATING CURRENT 5A SUITABLE FOR SERIES CONNECTION - IP V supply included acc. code acc. code prod. code prod. code