I-BRICK. High quality LED from Samsung. Curve shaped design. Vandal proof protective cover. Visual comfort. Available in 2 sizes.

Size: px

Start display at page:

Download "I-BRICK. High quality LED from Samsung. Curve shaped design. Vandal proof protective cover. Visual comfort. Available in 2 sizes."

Damian Potter
5 years ago
Views:

2 I-BRICK is a range of wall recessed luminaires with LED and compact fluorescent light sources. The glare-free cover enables I-BRICK to be installed in most places where a comfortable illumination is needed. The high quality LED chip from Samsung and Citizen allow for less energy consumption with acceptable lighting levels. I-BRICK family is available in 5 different front covers in 2 sizes. The shallow housing can be installed in either wall or step where recess depth is limited. The high quality LED driver is integrated inside the luminaire for ease of installation. They are widely used to illuminate stairways, pathways and walls. Vandal proof protective cover. Curve shaped design. Visual comfort. High quality LED from Samsung. Double layer coating. Available in 2 sizes. Available in 6 colors. Efficiency LED driver. 182

Specification Fixture is manufactured in compliance with international standard of general requirement IEC 60598-1, fixed general purpose luminaires IEC 60598-2-1 and recessed luminaire IEC 60598-2-2.

3 Specification Fixture is manufactured in compliance with international standard of general requirement IEC , fixed general purpose luminaires IEC and recessed luminaire IEC Electrical protection class1. Protection against dust and water IP54/ IP65. Protection against mechanical impact IK08 on body and IK06 on optical part. High-pressure Die Cast Aluminium alloy body and components. Nano Ceramic surface conversion, resistant to corrosive environment. Luminiare primarily coated with epoxy resin and top coated with UV stabilized polyester powder and cured in digital temperature controlled chamber at 200 C. Self-extinguishing high impact resistant opal/ prismatic polycarbonate diffuser with UV stabilized additive. Material from Teijin Japan. Impact resistant safety tempered glass cover. Able to withstand the temperature up to 250 C. Post-cured treated silicone gasket. Temperature and weather resistant. Working temperature -40 C to +200 C. External screws are in stainless steel with protection dipping. Cable entry protected by weather proof EPDM grommet and to be used with H05RN-F/ H07RN-F cable with 6-8mm. diameter. 2G7 lampholder in PBT body from AAG Stucchi or equivalents. IMQ/ ENEC approved. G24d/ GX24d lampholder in PBT body from AAG Stucchi or equivalents. IMQ/ ENEC approved. G24q/ GX24q lampholder in PBT body from AAG Stucchi or equivalents. IMQ/ ENEC approved. G23 lampholder in PBT body from AAG Stucchi or equivalents. IMQ/ ENEC approved. E27 lampholder in ceramic body from Vossloh Schwabe or equivalents. VDE/ ENEC approved. Low loss magnetic ballast for fluorescent lamp from BAG Electronics or equivalents. ENEC approved. Electronic ballast for fluorescent lamp from TCI/ Tridonic or equivalents. ENEC approved. High efficiency LED module utilized Samsung chips. Assembled on MCPCB and mounted on to heat conductive material. High efficiency LED module in COB technology from Citizen - Japan. Assembled on MCPCB and mounted on to heat conductive material. High quality constant current LED driver. Conform to safety standard and electromagnetic compatibility standard. Driver is integrated in the luminaire. The whole systems tested to be operated under maximum ambient environment up to +40 C. Tinned copper conductor with silicone insulated internal wire from ENCO or equivalents. IMQ approved. Working temperature -40 C to +180 C. Terminal block in GFR PA6.6 for cable with cross section up to 2.5mm 2. VDE approved. Class1 luminaire provided with the earth connection. Installation work has to be carried on according to the enclosed installation manual. Available Color Black (replace the last 2 digits of ordering code with 01) Graphite (replace the last 2 digits of ordering code with 02) Dark Grey (replace the last 2 digits of ordering code with 03) Aluminium Silver (replace the last 2 digits of ordering code with 04) Smooth Silver (replace the last 2 digits of ordering code with 05) White (replace the last 2 digits of ordering code with 06) 183

4 I-BRICK/1 LED 4.1W 450lm 3000K XX XX LED 4.1W 470lm 4000K XX XX TC-DSE E27 11W XX XX TC-D G24d-2 18W 1200lm XX XX I-BRICK/2 TC-DEL G24q-2 18W 1200lm XX XX XX XX TC-SEL 2G XX XX 184

5 Long I-BRICK/1 LED 6.1W 680lm 3000K Long XX Long XX LED 6.1W 700lm 4000K Long XX Long XX TC-D G24d-3 26W 1800lm Long XX Long XX TC-DEL G24q-3 26W 1800lm Long XX Long XX Long I-BRICK/2 Long XX Long XX TC-SEL 2G7 Long XX Long XX 185

6 I-BRICK H-Ramp LED 4.1W 450lm 3000K or 470lm 4000K XX (3000K) XX (4000K) XX Long I-BRICK H-Ramp LED 6.1W 680lm 3000K 700lm 4000K XX (3000K) XX (4000K) XX 186

7 I-BRICK V-Ramp LED 4.6W 380lm 3000K XX LED 4.6W 400lm 4000K XX Long I-BRICK V-Ramp LED 4.6W 380lm 3000K XX LED 4.6W 400lm 4000K XX 187

8 I-BRICK V-Grill LED 4.1W 450lm 3000K or 470lm 4000K XX (3000K) XX (4000K) XX TC-SEL 2G XX Long I-BRICK V-Grill LED 6.1W 680lm 3000K or 700lm 4000K XX (3000K) XX (4000K) XX TC-SEL 2G XX 188

9 189 I-BRICK

TUBE. Precise construction encourages reliable IP rating. Bi-directional light output with single light source. Choices of light distribution angles.

TUBE. Precise construction encourages reliable IP rating. Bi-directional light output with single light source. Choices of light distribution angles. TUBE TUBE TUBE family is available in 4 different sizes. They are protected from the ingress of dust and water and are used in both outdoor and indoor environments. Operating with PAR, Compact Fluorescent,