Shape LIGHT +BUILDING 2014

Transcription

1 Shape LIGHT +BUILDING 2014

2 PRODUCT INDEX Pag.02 Appeal Wall mounted Pag.06 Shape Window frame Pag.10 Keen Spot Light Pag.14 Movit Flood Light Pag.20 Cool square Wall mounted / Bollard Pag.24 Cool Wall mounted / Bollard

3 PRODUCT INDEX Pag.28 Suit Surface mounted Pag.32 Continuous Line Inground walk-over Pag.36 Runner Step Recessed Pag.40 Marker Step Recessed Pag.44 Walker Wall Recessed Pag.48 Skill Wall mounted / Bollard Pag.56 Look Wall mounted / Bollard Pag.60 Lobby Downlight

4 APPEAL

5 3

6 APPEAL Wall applique Die-cast EN AB aluminium housing (copper free) with high corrosion resistance. Stainless steel screws. Clear policarbonate UV stop diffuser. Supplied with a 1m pre-wired H05RN-F cable. Silicone gaskets. Double powdered paint in 3 step process: _ surface treatment containing ceramic nano particles (Bonderite); _ epoxy primer paint; _ polyester powder paint with high resistance against UV rays and harsh weather conditions. Luminaires supplied with LED circuit board and power supply. IP54 CLASS II q IK 06 COLOURS: White (code 01) Aluminium grey (code 14) This luminaire contains built-in LED modules with energy class: The LED modules cannot be changed in the luminaire (Regulation UE 874/2012). 4

7 APPEAL Wall applique S.6400W With leds white 3000K 1008lm Rated luminaire luminous flux 650lm ( simulated ) Rated input power 13,9W 240V Appeal has a clip locking system that allows a symmetrical or asymmetrical front cover securing. No visible fixing screw. Symmetrical fixing. The pin is set in a central position to the cover. The light is evenly distributed on all sides. Asymmetrical fixing 1. The pin is fixed in a decentralized position with the shorter part facing upwards. The light is more distributed upwards. Asymmetrical fixing 2. The pin is fixed in a decentralized position with the shorter part facing down. The light is distributed more downward. 5

8 SHAPE

9 7

10 SHAPE Window frame Die-cast EN AB aluminium housing (copper free) with high corrosion resistance. Protective Cover with clip locking system. Clear policarbonate diffuser. Supplied with a 1m pre-wired H05RN-F cable. Silicone gaskets. Double powdered paint in 3 step process: _ surface treatment containing ceramic nano particles (Bonderite); _ epoxy primer paint; _ polyester powder paint with high resistance against UV rays and harsh weather conditions. Luminaires supplied with LED circuit board and power supply. IP65 CLASS I y IK 06 COLOURS: White (code 01) Aluminium grey (code 14) This luminaire contains built-in LED modules with energy class: The LED modules cannot be changed in the luminaire (Regulation UE 874/2012). 8

11 SHAPE Window frame S.6420W With leds white 3200K 350lm Rated luminaire luminous flux 203lm Rated input power 5,2W 240V With radial lens 10 x170 S.6420N With leds white 4000K 400lm Rated luminaire luminous flux 233lm Rated input power 5,2W 240V With radial lens 10 x Protective cover with clip locking system. No visible screws. The fitting allows an adjustment of approximately 5 for the perfect alignment of the light beam with the window frame Fitting centrally positioned for a symmetrical lighting distribution Double installation with 2 fittings, recommended for oversized windows and frames. Installation at the ends of the frame opening, for a more marked lighting effect. 9

12 KEEN

13 design K.Begasse 11

14 KEEN Die-cast EN AB aluminium housing (copper free) with high corrosion resistance. Stainless steel screws. Clear toughened glass diffuser. MINIKEEN supplied with a 1m prewired H05RN-F cable. KEEN supplied with fast connector. Silicone gaskets. Double powdered paint in 3 step process: _ surface treatment containing ceramic nano particles (Bonderite); _ epoxy primer paint; _ polyester powder paint with high resistance against UV rays and harsh weather conditions. Luminaires supplied with LED circuit board and power supply. IP65 CLASS I y IK 06 KEEN IK 07 MINIKEEN PATENT PENDING 2014 COLOURS: White (code 01) Aluminium grey (code 14) This luminaire contains built-in LED modules with energy class: The LED modules cannot be changed in the luminaire (Regulation UE 874/2012). ACCESSORY FOR VERTICAL INSTALLATION for KEEN S.1519 S.1509 ACCESSORY FOR VERTICAL INSTALLATION for MINIKEEN S.1014 STAKE FOR MINIKEEN and KEEN Only for vertical installation accessory 12

15 KEEN MINIKEEN S.1500W With 3 leds 3200K 620lm Rated luminaire luminous flux 588lm Rated input power 8,9W 240V 10 S.1501W With 3 leds white 3200K 620lm Rated luminaire luminous flux 568lm Rated input power 8,9W 240V KEEN S.1510W With 5 led white 3200K 1345lm Rated luminaire luminous flux 1139lm Rated input power 17,2W 240V 10 S.1511W With 5 led white 3200K 1345lm Rated luminaire luminous flux 1081lm Rated input power 17,2W 240V S.1513W With 5 led white 3200K 1345lm Rated luminaire luminous flux 1080lm Rated input power 17,2W 240V With ellipsoidal lenses 13

16 MOVIT

17 design K.Begasse 15

18 MOVIT Slim floodlight Die-cast EN AB aluminium housing (copper free) with high corrosion resistance. Extruded EN AW-6060 aluminium structure (arm version) with high corrosion resistance. Stainless steel screws. Clear toughened glass diffuser. HI-GRADE aluminium reflectors. Supplied with a 1m pre-wired H05RN-F cable. Silicone gaskets. Double powdered paint in 3 step process: _ surface treatment containing ceramic nano particles (Bonderite); _ epoxy primer paint; _ polyester powder paint with high resistance against UV rays and harsh weather conditions. Luminaires supplied with LED circuit board and power supply. IP65 CLASS I y IK 06 COLOURS: White (code 01) Aluminium grey (code 14) This luminaire contains built-in LED modules with energy class: The LED modules cannot be changed in the luminaire (Regulation UE 874/2012) S.2842 Ø60mm CYLINDRICAL POLE TO BE BURIED Pole total height 4,0m To be buried for 0,5m S.2843 Ø60mm CYLINDRICAL POLE WITH BASE Pole total height 3,5m Ø S.3046 ACCESSORY SINGLE MOUNT POLE Ø60mm For 1 MOVIT RECTANGULAR 130mm or for 1 MOVIT SQUARE 220mm Ø 60 S.3047 ACCESSORY DOUBLE MOUNT POLE Ø60mm For 2 MOVIT RECTANGULAR 130mm or for 2 MOVIT SQUARE 220mm

19 MOVIT RECTANGULAR 130mm Slim floodlight MOVIT RECTANGULAR C0 101 C90 94 S.3005W With leds white 3000K 1008lm With symetric reflector Rated luminaire luminous flux 797lm Rated input power 12,5W 240V C C90 80 S.3000W With leds white 3000K 1008lm With asymetric reflector Rated luminaire luminous flux 723lm Rated input power 12,5W 240V S.3049 ACCESSORY STAKE FOR MOVIT SQUARE and MOVIT RECTANGULAR In polypropilene Colour: black (code.09) The 100 mm upper part must stay out of the ground level, according with the norms. MOVIT RECTANGULAR WITH ARM S.3010W With leds white 3000K 1008lm Rated luminaire luminous flux 797lm Rated input power 12,5W 240V 17

20 MOVIT SQUARE 220mm Slim floodlight MOVIT SQUARE C0 108 C90 94 S.3055W With leds white 3000K 2016lm With symetric reflector Rated luminaire luminous flux 1477lm Rated input power 25W 240V S.3050W 51 With leds white 3000K 2016lm With asymetric reflector Rated luminaire luminous flux 1370lm Rated input power 25W 240V C C S.3049 ACCESSORY STAKE FOR MOVIT SQUARE and MOVIT RECTANGULAR In polypropilene Colour: black (code.09) The 100 mm upper part must stay out of the ground level, according with the norms. MOVIT SQUARE WITH ARM S.3060W With leds white 3000K 2016lm Rated luminaire luminous flux 1477lm Rated input power 25W 240V 18

21 MOVIT SQUARE 320mm Slim floodlight MOVIT SQUARE C0 108 C90 94 S.3075W With leds white 3000K 4536lm With symetric reflector Rated luminaire luminous flux 3683lm Rated input power 45,5W 240V C C90 90 S.3070W With leds white 3000K 4536lm With asymetric reflector Rated luminaire luminous flux 2990lm Rated input power 45,5W 240V S.2844 Ø76mm CYLINDRICAL POLE TO BE BURIED Pole total height 5,0m To be buried for 0,5m Provided with inspection door S.2845 Ø76mm CYLINDRICAL POLE WITH BASE Pole total height 4,5m Provided with inspection door Ø S.3044 ACCESSORY SINGLE MOUNT POLE Ø76mm For 1 MOVIT SQUARE 320mm Ø S.3045 ACCESSORY DOUBLE MOUNT POLE Ø76mm For 2 MOVIT SQUARE 320mm 19

22 KEEN COOL SQUARE

23 21

24 COOL SQUARE Die-cast EN AB aluminium housing (copper free) with high corrosion resistance. Extruded EN AW-6060 aluminium structure (bollard version) with high corrosion resistance. Toughened glass diffuser. Stainless steel screws. COOL is supplied with single cable entry. Silicone gaskets. Double powdered paint in 3 step process: _ surface treatment containing ceramic nano particles (Bonderite); _ epoxy primer paint; _ polyester powder paint with high resistance against UV rays and harsh weather conditions. Luminaires supplied with LED circuit board. IP54 CLASS I y IK 06 COLOURS: White (code 01) Aluminium grey (code 14) This luminaire contains built-in LED modules with energy class: The LED modules cannot be changed in the luminaire (Regulation UE 874/2012). COOL SQUARE APPLIQUE CAN BE INSTALLED IN THE GROUND WITH A PROPER FIXING FLANGE S.7289 S.7289 FLANGE FOR COOL SQUARE Steel flange with stainless steel screws (to be fixed in concrete). 22

25 COOL SQUARE COOL SQUARE APPLIQUE S.7280W With leds white 3000K 2296lm Rated luminaire luminous flux 1090lm Rated input power 28,4W 240V COLOURS: White (code 01) Aluminium grey (code 14) COOL SQUARE BOLLARD H = 580 mm S.7285W With leds white 3000K 2296lm Rated luminaire luminous flux 1090lm Rated input power 28,4W 240V COLOURS: Aluminium grey (code 14) 23

26 COOL

27 25

28 COOL Die-cast EN AB aluminium housing (copper free) with high corrosion resistance. Extruded EN AW-6060 aluminium structure (bollard version) with high corrosion resistance. Toughened glass diffuser. Stainless steel screws. MINI-COOL L 220m hard wired with H07RN-F cable and fast connector IP68 included. COOL L 290mm is supplied with single cable entry. Silicone gaskets. Double powdered paint in 3 step process: _ surface treatment containing ceramic nano particles (Bonderite); _ epoxy primer paint; _ polyester powder paint with high resistance against UV rays and harsh weather conditions. Luminaires supplied with LED circuit board. IP54 CLASS I y COOL L 290mm CLASS II q MINI-COOL L 220mm IK 06 COLOURS: White (code 01) Aluminium grey (code 14) COOL APPLIQUE 290mm S.7270W With leds white 3000K 2016lm Rated luminaire luminous flux 1034lm Rated input power 24W 240V This luminaire contains built-in LED modules with energy class: The LED modules cannot be changed in the luminaire (Regulation UE 874/2012). 26

29 COOL 220mm MINI-COOL APPLIQUE 220mm S.7231W With leds white 3000K 1153lm Rated luminaire luminous flux 519lm Rated input power 13,5W 240V MINI-COOL BOLLARD H = 230 mm S.7236W With leds white 3000K 1153lm Rated luminaire luminous flux 519lm Rated input power 13,5W 240V MINI-COOL BOLLARD H = 590 mm S.7241W With leds white 3000K 1153lm Rated luminaire luminous flux 519lm Rated input power 13,5W 240V S.7249 FLANGE FOR COOL BOLLARD Steel flange with stainless steel screws (to be fixed in concrete). 27

30 SUIT

31 Surface mounted 29

32 SUIT Surface mounted Die-cast EN AB aluminium housing (copper free) with high corrosion resistance. Protective guard of 5 mm thickness. Policarbonate diffuser. Stainless steel screws. Luminaire hard wired with Factorysealed with B component epoxy resin H07RN-F cable. Silicone gaskets. Double powdered paint in 3 step process: _ surface treatment containing ceramic nano particles (Bonderite); _ epoxy primer paint; _ polyester powder paint with high resistance against UV rays and harsh weather conditions. LED versions supplied with LED circuit. IP67 CLASS I y IK10 PATENT PENDING 2014 COLOUR: Aluminium grey (code 14) This luminaire contains built-in LED modules with energy class: The LED modules cannot be changed in the luminaire (Regulation UE 874/2012). FOR APPLICATIONS EXCLUDING DRIVEWAYS AREAS SUIT is installed without any anchor flange. FOR APPLICATIONS IN DRIVEWAYS AREAS SUIT is installed with the drive overe anchor flange. Driveover 3000 Kg at 10 Km/h through the use of the anchor flange to the ground. 235 Ø 235 S.5690 ANCHOR FLANGE TO BE CEMENTED TO THE GROUND For applications in driveways areas, SUIT must be installed with its proper anchor flange. The flange is provided with the necessary fixing A4 screws in stainless steel. 30

33 SUIT Surface mounted S.5691N With led white 4000K Rated luminaire luminous flux 90lm ( simulated ) Rated input power 2,8W 240V ( Anchor flange S.5690 not included ) T 40 C Ø S.5692N With led white 4000K Rated luminaire luminous flux 180lm ( simulated ) Rated input power 5,3W 240V ( Anchor flange S.5690 not included ) Ø Ø T 40 C S.5693N With led white 4000K Rated luminaire luminous flux 180lm ( simulated ) Rated input power 5,3W 240V ( Anchor flange S.5690 not included ) T 40 C S.5694N With led white 4000K Rated luminaire luminous flux 300lm ( simulated ) Rated input power 7,5W 240V ( Anchor flange S.5690 not included ) Ø T 40 C 31

34 CONTINUOUS LINE

35 33

36 CONTINUOUS LINE To-be-fixed supports and recessing box in extruded anodized EN AW aluminium housing (copper free) with high corrosion resistance. Toughened glass diffusor 15 mm thick. Luminaire hard wired with H05RN-F single cable. Fixing bases and recessing box included. Fast connector IP67 included. Luminaires supplied with LED circuit 24V d.c., power supply not included. IP67 CLASS III K IK 09 PATENTED Maximun weight 500 Kg COLOUR: Anodized aluminium (code 13) This luminaire contains built-in LED modules with energy class: The maximum distance between the transformer and the further fitting must not exceed 10 meters (cable 2x1mm²). The LED modules cannot be changed in the luminaire (Regulation UE 874/2012). TRS MAX 10 m (cable 2x1mm²) from TRS The recessing box must be placed at ground level. 20 cm drainage gravel or drainage pipe must be used under the recessing box to allow easy water evacuation. Connection to the main line has to be done into junction boxes. S.3407 REMOTE POWER SUPPLY (NOT DIMMABLE) 100W 240V/24V DC Dimensions 240x40x30mm IP66 S.3420 REMOTE BOX NOT DIMMABLE POWER SUPPLY 100W 240V/24V DC 5 Exit Dimensions 260x260x100mm IP55 S.3402 DIMMABLE REMOTE POWER SUPPLY 1-10V 40W 240V/24V DC Dimensions 162x43x32mm IP67 34

37 CONTINUOUS LINE FULLGLASS FLUSH VERSION 1,0m S.7011W With leds white 3000K Rated luminaire luminous flux 104lm Rated input power 10W 24V Recessing box included Requires remote power supply 240V/24V DC (type S.3407) T 39 C

38 RUNNER

39 37

40 RUNNER Step recessed Fixed supports and recessing box in extruded anodized EN AW-6060 aluminium housing (copper free) with high corrosion resistance. Toughened glass diffusor 15 mm thick. Luminaire hard wired with H05RN-F single cable. Fast connector IP67 included. Luminaires supplied with LED circuit board. IP65 CLASS II q IK 09 FINISHING: Anodized aluminium (code 13) This luminaire contains built-in LED modules with energy class: The LED modules cannot be changed in the luminaire (Regulation UE 874/2012). 300mm 280mm Runner is a step recessed product to be installed on the riser and perfectly flush to the wall. The two ends wings of the recessing box can be easily shortened to vary the length of the product from 300 to 280 mm. Runner must be installed with its recessing box. 38

41 RUNNER Step recessed STEP RECESSED FLUSH 300mm S.7020W With leds white 3000K 290lm Rated luminaire luminous flux 52lm ( simulated ) Rated input power 3,7W 240V Recessing box not included Spring lock system for a total absence of visible screws S.7029 RECESSING BOX for RUNNER 300mm 300 x 35mm Depth 90mm STEP RECESSED FLUSH 1000mm S.7025W With leds white 3000K 870lm Rated luminaire luminous flux 156lm ( simulated ) Rated input power 15W 240V Recessing box not included Spring lock system for a total absence of visible screws S.7030 RECESSING BOX for RUNNER 1000mm 1026 x 35mm Depth 90mm 39

42 MARKER

43 41

44 MARKER Die-cast EN AB aluminium housing (copper free) with high corrosion resistance. Toughened glass diffuser. Stainless steel screws. Supplied with double cable entry. Silicone gaskets. Double powdered paint in 3 step process: _ surface treatment containing ceramic nano particles (Bonderite); _ epoxy primer paint; _ polyester powder paint with high resistance against UV rays and harsh weather conditions. Luminaires supplied with LED circuit. IP65 CLASS I y IK 10 COLOURS: Aluminium grey (code 14) This luminaire contains built-in LED modules with energy class: The LED modules cannot be changed in the luminaire (Regulation UE 874/2012). absence of glare MARKER is a product conceived to be recessed in the riser of the steps. The light is controlled and oriented downward to avoid glare even when the position of the lighting fitting is higher than the height of the point of view. 42

45 MARKER Step riser recessed S.6325W With leds white 3000K 588lm Rated luminaire luminous flux 170lm ( simulated) Rated input power 8,3W 240V Recessing box not included Reinforced fixing system with screws S.6329 RECESSING BOX for MARKER 310 x 79mm Depth 86mm 43

46 WALKER

47 45

48 WALKER Die-cast EN AB aluminium housing (copper free) with high corrosion resistance. Toughened glass diffuser. Stainless steel screws. The body is totally removable through a spring lock mechanism. Supplied with double cable entry. Silicone gaskets. Double powdered paint in 3 step process: _ surface treatment containing ceramic nano particles (Bonderite); _ epoxy primer paint; _ polyester powder paint with high resistance against UV rays and harsh weather conditions. Luminaires supplied with LED circuit. IP65 CLASS I y IK 10 COLOURS: White (code 01) Aluminium grey (code 14) This luminaire contains built-in LED modules with energy class: The LED modules cannot be changed in the luminaire (Regulation UE 874/2012). The light distribution is in accordance with light pollution regulations. WALKER is a wall recessed fitting designed to guarantee a wide distribution of light and directed downwards. 46

49 WALKER Wall recessed S.6320W With leds white 3000K 1153lm Rated luminaire luminous flux 368lm Rated input power 13,5W 240V Recessing box not included Spring lock system for a total absence of visible screws S.6329 RECESSING BOX for WALKER 310 x 79mm Depth 86mm 47

50 SKILL

51 Wall mounted Bollard 49

52 SKILL BOLLARD Die-cast EN AB aluminium housing (copper free) with high corrosion resistance. Toughened glass diffuser. Stainless steel screws. Supplied with single cable entry with PG. Silicone gaskets. Double powdered paint in 3 step process: _ surface treatment containing ceramic nano particles (Bonderite); _ epoxy primer paint; _ polyester powder paint with high resistance against UV rays and harsh weather conditions. Luminaires supplied with LED circuit. IP65 CLASS II q IK 06 COLOURS: Aluminium grey (code 14) This luminaire contains built-in LED modules with energy class: The LED modules cannot be changed in the luminaire (Regulation UE 874/2012). The light distribution is in accordance with light pollution regulations. 50

53 SKILL BOLLARD SKILL BOLLARD SINGLE EMISSION S.6350W With leds white 3000K 1650lm Rated luminaire luminous flux 800lm ( simulated ) Rated input power 18W 240V SKILL BOLLARD DOUBLE EMISSION S.6360W With leds white 3000K 3300lm Rated luminaire luminous flux 1900lm ( simulated ) Rated input power 35W 240V S.6359 FLANGE FOR SKILL BOLLARD Steel flange with stainless steel screws (to be fixed in concrete). 51

54 SKILL Wall mounted footpath lighting Die-cast EN AB aluminium housing (copper free) with high corrosion resistance. Toughened glass diffuser. Stainless steel screws. MINISKILL is supplied with a prewired 1m H05RN-F cable. SKILL is supplied with single cable entry. Silicone gaskets. Double powdered paint in 3 step process: _ surface treatment containing ceramic nano particles (Bonderite); _ epoxy primer paint; _ polyester powder paint with high resistance against UV rays and harsh weather conditions. Luminaires supplied with LED circuit. IP65 CLASS I y SKILL CLASS III K MINISKILL 24V DC IK 06 COLOURS: White (code 01) Aluminium grey (code 14) This luminaire contains built-in LED modules with energy class: The LED modules cannot be changed in the luminaire (Regulation UE 874/2012). The light distribution is in accordance with light pollution regulations. S.3402 S.3407 DIMMABLE REMOTE POWER SUPPLY 1-10V 40W 240V/24V DC Dimensions 162x43x32mm IP67 S.3422 BOX WITH DIMMABLE REMOTE POWER SUPPLY 40W 240V/24V DC Dimensions 260x260x90mm IP55 REMOTE POWER SUPPLY (NOT DIMMABLE) 100W 240V/24V DC Dimensions 240x40x30mm IP66 S.3420 REMOTE BOX NOT DIMMABLE POWER SUPPLY 100W 240V/24V DC 5 Exit Dimensions 260x260x100mm IP55 52

55 MINISKILL ROUND Wall mounted footpath lighting S.6270W With leds in warm white 3000K 504lm Rated luminaire luminous flux 167lm Rated input power 6W 24V Requires remote power supply 240V/24V DC (type S.3402 or S.3407) Ø 115 MINISKILL SQUARE Wall mounted footpath lighting S.6250W With leds in warm white 3000K 504lm Rated luminaire luminous flux 171lm Rated input power 6W 24V Requires remote power supply 240V/24V DC (type S.3402 or S.3407)

56 SKILL ROUND Wall mounted footpath lighting S.6280W With leds white 3000K 1008lm Rated luminaire luminous flux 416lm Rated input power 12,5W 240V Ø SKILL SQUARE Wall mounted footpath lighting S.6260W With leds white 3000K 1008lm Rated luminaire luminous flux 417lm Rated input power 12,5W 240V SKILL RECTANGULAR Wall mounted footpath lighting S.6240W With leds white 3000K 1153lm Rated luminaire luminous flux 428lm Rated input power 13,5W 240V 54

57 ACCESSORIES FOR SKILL WALL RECESSED Skill becomes a wall recessed fitting totally flush with the wall by using the recessing box and the fixing kit. Wall flush installation S.6289 RECESSED BOX for SKILL ROUND (suitable for fair faced concrete applications) S.6249 FIXING KIT for installation in the recessing box. Extractor tools included. 70 Ø 237 Wall flush installation S.6269 RECESSED BOX for SKILL SQUARE (suitable for fair faced concrete applications) S.6249 FIXING KIT for installation in the recessing box. Extractor tools included x217 Wall flush installation S.6248 RECESSED BOX for SKILL RECTANGULAR (suitable for fair faced concrete applications) x133 S.6249 FIXING KIT for installation in the recessing box. Extractor tools included. 55

58 LOOK

59 57

60 LOOK Die-cast EN AB aluminium housing (copper free) with high corrosion resistance. Extruded EN AW-6060 aluminium structure (bollard version) with high corrosion resistance. Toughened glass diffuser. Stainless steel screws. MINI-LOOK L 220mm hard wired with H07RN-F cable and fast connector IP68 included. LOOK L 290mm is supplied with single cable entry. Silicone gaskets. Double powdered paint in 3 step process: _ surface treatment containing ceramic nano particles (Bonderite); _ epoxy primer paint; _ polyester powder paint with high resistance against UV rays and harsh weather conditions. Luminaires supplied with LED circuit board. IP65 CLASSE I y LOOK L 290mm CLASSE II q MINI-LOOK L 220mm IK 06 COLOURS: White (code 01) Aluminium grey (code 14) This luminaire contains built-in LED modules with energy class: The LED modules cannot be changed in the luminaire (Regulation UE 874/2012). LOOK APPLIQUE 290mm S.7250W With leds white 3000K 2016lm Rated luminaire luminous flux 965lm Rated input power 24W 240V

61 LOOK MINI-LOOK APPLIQUE 220mm S.7201W With leds white 3000K 1153lm Rated luminaire luminous flux 505lm Rated input power 13,5W 240V MINI-LOOK BOLLARD SINGLE H 220mm S.7206W With leds white 3000K 1008lm Rated luminaire luminous flux 355lm Rated input power 12,5W 240V H 580mm S.7211W With leds white 3000K 1008lm Rated luminaire luminous flux 355lm Rated input power 12,5W 240V MINI-LOOK BOLLARD DOUBLE H 220mm 33 S.7215W With leds white 3000K 2016lm Rated luminaire luminous flux 687lm Rated input power 25W 240V H 580mm S.7220W With leds white 3000K 2016lm Rated luminaire luminous flux 687lm Rated input power 25W 240V S.7249 FLANGE FOR LOOK Steel flange with stainless steel screws (to be fixed in concrete). 59

62 LOBBY

63 61

64 LOBBY Die-cast EN AB aluminium housing (copper free) with high corrosion resistance. Aluminium front trim with visible screws for LOBBY BASIC. Marine grade stainless steel AISI 316L front trim with interlocking clips system for LOBBY PROFESSIONAL. Toughened glass 10 mm thick. Stainless steel screws. Luminaire hard wired with 1m H07RN-F cable (for BASIC versions). Silicone gaskets. Double powdered paint in 3 step process: _ surface treatment containing ceramic nano particles (Bonderite); _ epoxy primer paint; _ polyester powder paint with high resistance against UV rays and harsh weather conditions. Luminaires supplied with LED circuit. IP65 CLASS I y LOBBY BASIC CLASS II q LOBBY PROFESSIONAL IK10 PATENT PENDING 2013 FINISHING: Aluminium grey (code 14) for LOBBY BASIC Stainless steel (code 19) for LOBBY PROFESSIONAL This luminaire contains built-in LED modules with energy class: Versions MINILOBBY BASIC LOBBY BASIC MINILOBBY PROFESSIONAL LOBBY PROFESSIONAL Weight 0,9 kg 2,2 kg 1,3 kg 2,6 kg The LED modules cannot be changed in the luminaire (Regulation UE 874/2012). MINILOBBY BASIC ALUMINIUM TRIM 57 S.7300W With led white 3000K CRI83 800lm Power supply integrated in the LED module Rated luminaire luminous flux 563lm Rated input power 14,2W 23 S.7305W With led white 3000K CRI83 800lm Power supply integrated in the LED module Rated luminaire luminous flux 658lm Rated input power 14,2W Ø 130 S.7309 *Hmin Ø 140 max 40 *The minimum space to ensure adequate ventilation is H=120mm HOUSING FOR CONCRETE CEILINGS for MINILOBBY BASIC Dim. 200 x 200 x 120mm 62

65 LOBBY LOBBY BASIC ALUMINIUM TRIM 79 S.7320W With led white 3000K CRI lm Power supply integrated in the LED module Rated luminaire luminous flux 1623lm Rated input power 26,2W 36 S.7325W With led white 3000K CRI lm Power supply integrated in the LED module Rated luminaire luminous flux 1769lm Rated input power 26,2W *Hmin Ø 190 Ø 200 max 40 *The minimum space to ensure adequate ventilation is H=150mm S.7329 HOUSING FOR CONCRETE CEILINGS for LOBBY BASIC Dim. 260 x 260 x 150mm MINILOBBY PROFESSIONAL STAINLESS STEEL TRIM 55 S.7340W.19 With led white 3000K CRI lm With box and power supply 240V (Dimmable power supply on request) Rated luminaire luminous flux 696lm Rated input power 14,5W 21 S.7345W.19 With led white 3000K CRI lm With box and power supply 240V (Dimmable power supply on request) Rated luminaire luminous flux 865lm Rated input power 14,5W *Hmin 170 max Ø 130 Ø *The minimum space to ensure adequate ventilation and easy installation is H=170mm S.7349 HOUSING FOR CONCRETE CEILINGS for MINILOBBY PROFESSIONAL Dim. 360 x 200 x 170mm LOBBY PROFESSIONAL STAINLESS STEEL TRIM 75 S.7360W.19 With led white 3000K CRI lm With box and power supply 240V (Dimmable power supply on request) Rated luminaire luminous flux 1843lm Rated input power 28,5W 30 S.7365W.19 With led white 3000K CRI lm With box and power supply 240V (Dimmable power supply on request) Rated luminaire luminous flux 1917lm Rated input power 28,5W *Hmin 170 max Ø 190 Ø *The minimum space to ensure adequate ventilation and easy installation is H=170mm S.7369 HOUSING FOR CONCRETE CEILINGS for LOBBY PROFESSIONAL Dim. 400 x 260 x 170mm 63

66 64 The present brochure as well as the general catalogue, the website and the SIMES applications for ipad, iphone, Android cannot be reproduced fully or partially. All rights reserved. Due to continual development and improvement, any photographs, product descriptions, measurements, illustrations, drawings and specifications in this catalogue may be approximations, and the company is not liable. We reserve the right to change specifications without prior notice. Products in this brochure are REGISTERED and / or PATENTED.

67

68 CATNOV2014ENG2 SIMES S.p.A. VIA G. Pastore 2/ Corte Franca (BS) - ITALY SIMES S.p.A. Tel. (+39) Fax (+39) VIA G. Pastore 2/ Corte Franca (BS) - ITALY Tel. (+39) simes@simes.com Fax (+39) simes@simes.com -