Battens & special purpose

Transcription

1 & special purpose are the simple, inexpensive lighting solution for applications where aesthetics and luminance control are not critical.

2 107 7 Pentura TMS 122 Pentura TMS 122 TMS 122 TMS 122/228 TMS 122/228 with GMS 122/228 R Functional and economical general purpose batten for 1 x 'TL'5 fluorescent lamp with aluminium symmetric reflector for surface mounting on the wall or ceiling. Sleek dimensions (7 mm width) Coupled with 'TL'5 lamp & high frequency ballast, the luminaire is one of the most efficient systems. Housing made of CRCA sheet steel, powder coated & is spared of any weld spots. Optional imported anodised glossy reflector can be used for effective light distribution. Small offices Conference rooms Reception & public service areas Recreational areas (restaurants, cafeteria) Shops Boutiques Textile Mills Mounting electrical connection through cable entry centrally Method : base plate (with electrical components) fixed to the ceiling via holes for (wood) screws. White pre-lacquered cover (decorative) fixed with 2 screws (supplied) to the base plate. TMS122/128 HF 1 x TL5 28 W TMS122/228 HF 2 x TL5 28 W TMS122/128 E HF 1 x TL5 28 W TMS122/228 E HF 2 x TL5 28 W TMS122/254 HFP 2 x TL5 54 W Type Ordering No Quantity Dimensions Gross Weight Volume per box (mm) (kg) TMS122/128 HF x 145 x TMS122/228 HF x 145 x TMS122/128 E HF x 145 x TMS122/228 E HF x 145 x TMS122/254 HFP x 145 x GMS122/128 R x 120 x GMS122/228 R* x 120 x Pentura TMS 122/ TMS 122 / TMS 122 / 228 with GMS 122 REFLECTOR

3 TMC 501 Series TMC 501 Series TMC 501 / 26 TKC 20 / 26 TMC 501 / 16 Functional and decorative general purpose basic battens for TL / TL D fluorescent lamp. For surface mounting on the wall or ceiling. The channel has a single piece construction made of powder coated white CRCA sheet steel, eliminating spot welds & hence rust free The aesthetically designed lampholder brackets are side-in-type for ease of installation / maintenance The luminaires uses an open construction ballast or high frequency electronic ballast Choice of powder-coated and vitreous enamelled reflectors Small offices Conference rooms Reception and public service areas Recreational areas (restaurants, cafeterias) Textile mills Holes for (wood) screw, fixing and knockouts for suspension mounting by means of Ø 19mm conduits. Safety class I TMC 501/16 HPF 1 x 'LTD 6W / 'TL' 40 W TMC 501/26 HPF 2 x 'TLF' 6 W / 'TL' 40 W TMC 501/16 HPF 1 x 'TLD' 6 W / 'TL' 40W TMC 501 / 26 HF 2 x 'TLD' 6W / 'TL' 40 W TKC 202/16 HPF 1 x 'LTD 6W / 'TL' 40 W TKC 20/26 HPF 2 x 'TLD' 6W / 'TL' 40 W TKC 20 / 26 HPF 2 x 'TLD' 6W / 'TL' 40 W TMC 501 /16 HPF x 171 x x TMC 501/26 HPF x 171 x x TMC 501 / 16 HF x 171 x x TMC 501 /26 HF x 171 x x TKA 20 reflector x 260 x x TKA 202 reflector x 260 x x * Data for LPF versions available on request TKC 20 comprises of 1 No. reflector TKA and 1 No. batten TMC 501 TMC 501 / TMC 501 / TKC 202 / 16 and 20 / TKC 202 / 26 and 20 /

4 TMC 55 Series TMC 55 Series TMC 55 / 26 TKC 24 / 26 TMC 55 / 16 Functional and economical general purpose basic batten for 'TL'/TL'D fluorescent lamp. For surface mounting on the wall or ceiling. The channel is made of CRCA sheet steel, powder coated grey with CRCA cover, powder coated white The luminaire uses copper ballast or high frequency electronic ballast Vitreous enamelled reflector can be used along with channel Designed for ceiling / surface mounted with special provision for cable entry from side Small offices Conference rooms Reception and public service areas (restaurants, cafeterias) Shops Textile mills Holes for (wood) screw, fixing and knockouts for suspension mounting by means of 19mm conduits. Safety class I TMC 55/16 HPF 1 x TL D 6W / TL 40W TMC 55/16 HF 1 x TL D 6W / TL 40W TMC 55/26 HPF 2 x TL D 6W / TL 40W TMC 55/26 HF 2 x TL D 6W / TL 40W TKC 24/26 2 x TL D 6W / TL 40W TMC 55/16 HPF x 190 x x TMC 55/16 HF x 190 x x TMC 55/26 HPF x 190 x x TMC 55/26 HF x 190 x x TKC 242 reflector x 295 x x TMC 55/ TMC 55/

5 Proton TMS 021 Proton TMS 021 TMS 021/26 TMS 021/16 Functional general purpose basic batten for TL D fluorescent lamp suitable for surface mounting on wall or ceiling The channel is made of single piece construction made of powder-coated CRCA sheet steel, eliminating spot welds & hence rust free Specially designed polycarbonate lamp holder and brackets for high durability Integral lamp holder and brackets for ease in maintenance Luminaire uses open construction ballast or high frequency electronic ballast Choice of side reflectors available Small offices Cove lighting applications Shops and hotels restaurants Public areas Residential areas Textile mills Hotels for (wood) screw, fixing and knockouts for suspension mounting by means of 19mm conduits TMS 021/16 LPF 1 x TL D 6W TMS 021/16 HPF 1 x TL D 6W >0.80 TMS 021/16 HF 1 x TL D 6W TMS 021/26 LPF 2 x TL D 6W TMS 021/26 HPF 2 x TL D 6W TMS 021/16 HF 2 x TL D 6W TMS 021/16 LPF x 20 x TMS 021/16 HPF x 20 x TMS 021/16 HF x 20 x TMS 021/26 LPF x 20 x TMS 021/26 HPF x 20 x TMS 021/26 HF x 20 x TMS 021 TMS 021/ TMS 021/

6 TMX 95 TMX 95 TMX 95 IP 54 Corrosion resistant industrial batten for TL / TL D fluorescent lamp. For surface mounting on the wall or ceiling. LM6 die-cast aluminium epoxy painted control gear incorporating ballast and other accessories. Wiring through seamless aluminium pipe, epoxy painted. Specially designed enclosed type Phenol formaldehyde lampholders for TL and TL D lamps for sealing lamp caps. Areas where corrosive vapours are present like : Chemical plants Fertilizer plants Steel plants Designed for surface mounting, this luminaire can be fixed on the wall / ceiling by means of special clamps provided on the canopy. IP 54 TMX 95/26 2 x TL D 6W TMX 95/240 2 x TL 40W TMX 95 housing x 90 x x TMX x 285 x lampholders assembly for TL 40W lamps (4 nos) TMX x 285 x x lampholders assembly for TL D 6W lamps (4 nos) IP 54 TMX 95/ Ø