Technical data SUPRA. High temperature ABS - PC. Acrylic or Polycarbonate. White lacquered steel plate A. 230V, 50Hz (electromagnetic)

Size: px

Start display at page:

Download "Technical data SUPRA. High temperature ABS - PC. Acrylic or Polycarbonate. White lacquered steel plate A. 230V, 50Hz (electromagnetic)"

Bryan Williamson
6 years ago
Views:

1. TECHNICAL SPECIFICATION LIGHT FITTING BODY DIFFUSER REFLECTOR CURRENT High temperature ABS - PC Acrylic or Polycarbonate White lacquered steel plate 0.09-0.

ELECTRICAL INSULATION WORKING TEMPERATURE Class I / Class II (upon request) From 20ºC up to +50ºC (2x54 and higher ta max= 30ºC) ACCORDING TO STANDARD EN

1 1. TECHNICAL SPECIFICATION LIGHT FITTING BODY DIFFUSER REFLECTOR CURRENT High temperature ABS - PC Acrylic or Polycarbonate White lacquered steel plate A 230V, 50Hz (electromagnetic) POWER SOURCE LAMP TYPE V, 50-60Hz (electronic) Please contact us for other voltages T8 / T5 PROTECTION RATING IP 65 ELECTRICAL INSULATION WORKING TEMPERATURE Class I / Class II (upon request) From 20ºC up to +50ºC (2x54 and higher ta max= 30ºC) ACCORDING TO STANDARD EN ACCESSORIES INCLUDED Sealed gommets Steel ceiling fixing elements. Unbreakable polycarbonate closing clips. Optional stainless steel clips 2. IMAGES P Á G I N A 1 / 7

2 3. DIMENSIONS, POWER AND OTHER RELEVANT DATA T8 1 TUBE / 2 TUBES POWER (W) A (mm) B (mm) C (mm) 1 TUBE 2 TUBES D (mm) (1T) / 650 (2T) T5 1 TUBO / 2 TUBOS POWER (W) A (mm) B (mm) C (mm) 1/2 TUBES D (mm) 14/ / /49/ P Á G I N A 2 / 7

1. Fitted directly on to the ceiling. Using die cut fastening parts included in the light fitting. 5.3.2. Fitted on rail.

3 5. SPECIAL ACCESSORIES 5.1. STAINLESS STEEL CLIP 5.2. TRACK FASTENING P0126 ACCESSORY 5.3. LAMP ASSEMBLY The light fitting by AIRFAL can be fitted directly on to the ceiling or fastened to it by means of alu- minium rails or metal plates Fitted directly on to the ceiling. Using die cut fastening parts included in the light fitting Fitted on rail. Using two P0126 accessory units per light fitting to be able to mount light fittings on the following different rail profiles, each of them on lengths of mm and mm lengths. Rails ALUMINIUM RAILS METAL PLATE RAILS P Á G I N A 3 / 7

4 P0126 ACCESSORY 6. SPECIAL VERSIONS 6.1. CLASS II This light fitting can be converted into class II. According to the UNE-EN standard on light fittings, class II light fittings protect against electric shocks not only thanks to their main insulation but because they also include extra safety measures, such as double or reinforced insulation for all components (ballasts, wiring and remaining components). These measures do not include protective earthling conductors and do not depend on the installation conditions. P Á G I N A 4 / 7

5 7. USES This light fitting has an IP 65 protection rating making it suitable for installation in damp premises and out- doors. In addition, this is a grade F light fitting so it can be mounted on normally flammable surfaces. 8. LIGHT FITTINGS WITH EMERGENCY KIT The Emergency Kit is a functional device that can convert a fluorescent light fitting into an emergency lamp. This can work in a permanent or non-permanent mode. The emergency autonomy and light flux automatically adapt to the installed tube's power and the equipment power mode selector switch. For more information, please contact the technical department. P Á G I N A 5 / 7

6 9. PHOTOMETRY P Á G I N A 6 / 7

7 10. LED TUBE VERSION 10.1 DIMENSIONS AND OTHER RELEVANT DATA T8 1 TUBE / 2 TUBES LED TUBE LENGTH A (mm) B (mm) C (mm) 1 TUBE 2 TUBES D (mm) 600 mm mm (1T) / 650 (2T) mm All the accessories for the light fitting can also be used in the LED tube version (rails, quick connectors, pendant lights, etc.) except for the emergency kit. LED tube version photometry will depend on the actual photometry of the LED tube in the light fitting. DO NOT use transparent LED tubes WARNINGS 1.) AIRFAL INTERNATIONAL will manufacture all the light fittings for LED tubes to fit the tube as indicated by the customer. The customer should give AIRFAL INTERNATIONAL the wiring diagram of the tube to be used in the light fittings being purchased. 2.) AIRFAL INTERNATIONAL will manufacture light fittings for the LED tube chosen by the customer. In no case will AIRFAL INTERNATIONAL be responsible for how the LED tube works, as the light fitting's correct operation of the light fitting ultimately depends on these tubes. 3.) The LED tube supplier should provide a user manual along with the light fitting to prevent tubes being replaced by other brands and models with different wiring. For more information, please contact the technical department. P Á G I N A 7 / 7

Technical data MINIDELTA. Código: MD-01-I Revisión: 1 14/01/ TECHNICAL CHARACTERISTICS A.B.S. END CAPS A CURRENT

Technical data MINIDELTA. Código: MD-01-I Revisión: 1 14/01/ TECHNICAL CHARACTERISTICS A.B.S. END CAPS A CURRENT 1. TECHNICAL CHARACTERISTICS LIGHT FITTING BODY END CAPS CURRENT POWER SOURCES Lacquered steel A.B.S. 0.06-0.8 A 220-240V, 50-60Hz (electronic) 0.06-0.7 A (230V) For other voltages, please ask LAMP TYPE