IMMEDIATELY AVAILABLE! These are the product selection we have in stock!

Transcription

1 IMMEDIATELY AVAILABLE! These are the product selection we have in stock! ALFONS PETRA PA EVA LAURA BES RICHARD ASL 2007 ASL 2010 subject to prior sale! RONJA RONJA HSL B LED lm/4.000K RONJA HSL TB LED lm/4.000K ALFONS I FF LED 3.800lm/4.000K ALFONS I WUFF LED 3.600lm lm/4.000K PETRA PA I, III/600 LED 810lm/2.800K EVA I WUFF LED 3.600lm/3.000K BES III/2 für 1x HCI-T 70W RICHARD IV/R U LED 2.000lm 4.000lm/3.000K ASL 2007 WUFF LED 3.600lm/4.000K ASL 2010/1 LED 1.800lm lm/3.000K

2 industrial indoor luminaire in stock high bay RONJA HSL B LED BASIC EN IP V 240V / 50Hz 60Hz mounting height: 5.00m 8.00m light standards: medium and high lighting requirements incl. 1 CLE LED module LED gear: incl. electronic driver LED life expectancy: 50,000 hours/l 80/B 10; for minimum maintenance colour temperature: 4,000K neutral white ambient temperature: max. 40 C optical system: reflector made of highest grade aluminium, polished and anodised light distribution: symmetrical wide beam luminaire head: housing made of anodised, extruded aluminium sections safety glazing made of clear toughened glass glazing with stainless steel clips and silicone gasket, to be hinged down, with safety hook against falling down; using the IP 54 luminaire head completely wired; via a clamp within the luminaire head for surface mounting; excl. chain fixing materials, e.g. chains; safety glass, traverse, safety grid, loop in and loop out - to be ordered separately application areas: industry and sports facilities, schools, petrol stations, warehouses, storage buildings, car parks ø 454 wide beam CLE LED 125W/20,000lm/4,000K traverse - arragement for 2 high bays, hot dip galvanised T safety grid - made of galvanised steel wire SG ø safety grid traverse T

3 industrial indoor luminaire in stock high bay RONJA HSL TB LED BASIC EN IP V 240V / 50Hz 60Hz mounting height: 7.00m 12.00m light standards: medium and high lighting requirements incl. 1 CLE LED module LED gear: incl. electronic driver LED life expectancy: 50,000 hours/l 80/B 10; for minimum maintenance colour temperature: 4,000K neutral white ambient temperature: max. 40 C optical system: reflector made of highest grade aluminium, polished and anodised light distribution: symmetrical deep-wide beam luminaire head: housing made of anodised, extruded aluminium sections safety glazing made of clear toughened glass glazing with stainless steel clips and silicone gasket, to be hinged down, with safety hook against falling down; using the IP 54 luminaire head completely wired; via a clamp within the luminaire head for surface mounting; excl. chain fixing materials, e.g. chains; safety glass, traverse, safety grid, loop in and loop out - to be ordered separately application areas: industry and sports facilities, schools, petrol stations, warehouses, storage buildings, car parks ø 454 deep-wide beam CLE LED 125W/20,000lm/4,000K Zubehör: traverse - arragement for 2 high bays, hot dip galvanised T safety grid - made of galvanised steel wire SG ø safety grid SG traverse T

4 industrial indoor luminaire in stock high bay TANJA HL II LED BASIC EN IP V 240V / 50Hz 60Hz mounting height: 5.00m 12.00m light standards: medium and high lighting requirements incl. 2 Z LED modules designed to approved Zhaga standard: PrevaLED compact (PL-CP) colour temperature: 3,000K warm white or 4,000K neutral white LED gear: electronic driver; constant current ambient temperature: max 40 LED life expectancy: 100,000 hours/l 80/B 10; for minimum maintenance optical system: computer-optimised reflector for Zhaga LED modules for directed light and wide spacings light distribution: symmetrical deep-wide beam luminaire head: housing made of extruded aluminium, powder coated and dyed, heat proof plastics RAL 9005 (deep black), other colours on request clear toughened glass; removable; PMMA RE- SIST on request completely wired; with clamp inside the cable junction box; outside the housing for surface mounting; suitable for loop in and loop out; delivered in one piece preparation for loop in and loop out, fixing materials e.g. chains to be ordered separately application areas: gas stations, department stores, car parks, ports, warehouses, sports facilities PL-CP LED 86W/12,000lm/4,000K PL-CP LED 120W/16,000lm/4,000K class II at extra cost (add S at the end)

5 industrial outdoor luminaire in stock post top- / side entry luminaire ALFONS I FF LED EN IP 66 IK V 240V / 50Hz 60Hz recom. pole height: 3.00m 7.00m light standards: low and medium lighting requirements incl. 1 or 2 FF II-X LED module(s); easy to replace colour temperature: 4,000K neutral white; 3,000K warm white on request LED gear: electronic driver, up to 85,000 hours/b 10; driver with integrated Constant Light Output (CLO) in order to keep the luminous flux at the same level over the entire life time LED life expectancy: up to 100,000 hours, 50,000 hours/l 100/B 10 for minimum maintenance costs due to an excellent thermal management light control: at extra cost: power reduction, dimming or CLE- VER LIGHT optical system: directed light (multi layer) provided by an exchangeable, anti-aging lens technology light distribution: asymmetrical wide beam luminaire head: die cast aluminium, powder coated DB 703; other colours on request flat, clear toughened glass glazing completely wired; via a plug and socket connector within the luminaire head; luminaire head to be hinged upward ASA 60 for side entry ø 48mm up to 60mm (0, -5, -10, -) or for top entry mm (0, 5, 10, ) ASA 76 for top entry mm (0, 5, 10 ) necessary adapter ASA 60 or ASA 76; cast aluminum; powder coated in DB 703 to be ordered separately cable, column, pole accessories, wall -, corner - or column bracket to be ordered separately application areas: parks, boulevards, schools, home for elderly people, hotels, factory premises, residential and local distribution roads, main streets, car parks, pedestrian and cycle lanes, holiday parks FF LED II-X 25W/3,800lm/4,000K necessary cast aluminum, DB 703 adapter for top and side entry mm ASA adapter for top entry mm ASA ASA 60 douple bracket ZMA 276 hot dip galvanised steel, DB 703 douple bracket, inclination: 2, length: mm, for top entry mm ZMA wall bracket, inclination: 2, length: mm WA class II at extra cost (add S at the end) ASA wall bracket WA x x M8 90 x 90 ø 12

6 industrial outdoor luminaire in stock post top- / side entry luminaire ALFONS I WUFF LED EN IP 66 IK V 240V / 50Hz 60Hz recom. pole height: 3.00m 8.00m light standards: medium lighting requirements incl. 1 or 2 WUFF LED modules; easy to replace colour temperature: 4,000K neutral white; 3,000K warm white on request LED gear: electronic driver, up to 50,000 hours LED life expectancy: up to 55,000 hours/l 80/B 10 for minimum maintenance optical system: directed light (multi layer) provided by an exchangeable, anti-aging lens technology light distribution: asymmetrical wide beam luminaire head: die cast aluminium, powder coated DB 703 flat, clear toughened glass glazing completely wired; via a plug and socket connector within the luminaire head; luminaire head to be hinged upward ASA 60 for side entry ø 48mm up to 60mm (0, -5, -10, -) or for top entry mm (0, 5, 10, ) ASA 76 for top entry mm (0, 5, 10 ) necessary adapter ASA 60 or ASA 76; cast aluminum; powder coated in DB 703 to be ordered separately cable, column, pole accessories, wall -, corner - or column bracket to be ordered separately application areas: parks, boulevards, schools, home for elderly people, hotels, factory premises, residential and local distribution roads, main streets, car parks, pedestrian and cycle lanes, holiday parks WUFF LED 34W/3,600lm/4,000K WUFF LED 68W/7,200lm/4,000K (2) necessary cast aluminum, DB 703 adapter for top and side entry mm ASA adapter for top entry mm ASA douple bracket ZMA hot dip galvanised steel, DB 703 douple bracket, inclination: 2, length: mm, for top entry mm ZMA wall bracket, inclination: 2, length: mm WA (2) 2 Module class II at extra cost (add S at the end) ASA wall bracket WA x x M x 90 ø 12

7 industrial outdoor luminaire in stock post top - / side entry luminaire ASL 2007 EN optical system: IP 65 component area: IP 43 LLB: 230V / 50Hz EB: 220V 240V / 50Hz 60Hz recom. pole height: 3.00m 8.00m light standards: low, medium and high lighting requirements excl. metal halide, sodium or compact fluorescent lamp; incl. CosmoPolis gear: HCI and NAV: incl. low loss ballast, ignitor and condensator; electronic ballast on request; CDO, CPO, compact fluorescent incl. electronic ballast light control: at extra cost: power reduction or dimming optical system: reflector system for clear, tubular high pressure or for compact fluorescent lamps light distribution: asymmetrical wide beam luminaire head: made of cast and die cast aluminium, powder coated DB 703; other colours on request clear toughened glass glazing completely wired; via a clamp within the luminaire head for top entry ø 42mm up to mm, inclination 0, 5 resp. or for side entry ø 42mm - ø 60mm; dispatch standard: post top, 5 lamp (except for CPO), cable, adapter RS 76/60 for post top mm column, pole accessories, wall, corner or column bracket - to be ordered separately application areas: parkways, cycle lanes, residential and local distribution roads, main streets, boulevards, pedestrian zones, car parks, schools, home for elderly people, hotels, factory premises, squares lamp socket kg product code 1 x HCI-TT 70W E x NAV-T 50/70W* E x NAV-T 70W E hot-dip galvanised steel / hot-dip galvanised steel, DB 703 wall bracket, inclination 2, length: mm WA 71-2 / WA /.714 corner bracket, inclination 2, length: mm EA 61-2 / EA /.614 adapter RS 76/60 for post top mm RS 76/ /.07 adapter RS 76/60 3 x M wall bracket WA 71-2 WA x 120 corner bracket EA 61-2 EA x 90 ø 12 * switchable class II at extra cost (add S at the end)

8 industrial outdoor luminaire in stock post top - / side entry luminaire ASL 2007 LED 220V 240V / 50Hz 60Hz EN optical system: IP 65 component area: IP 43 recom. pole height: 4.00m 7.00m light standards: for low and medium lighting requirements incl. 1 glare-free LLM LED module; easy to replace colour temperature: 3,000K warm white or 4,000K neutral white LED gear: according to the electronic driver, to 100,000 hours; driver with integrated Constant Light Output (CLO) in order to keep the luminous flux the same over the entire life time LED life expectancy: hours/l 100 for minimum maintenance light control: at extra cost: power reduction, dimming or CLE- VER LIGHT optical system: computer-optimised reflector made of highest grade aluminium, polished and anodised for horizontally mounted LLM LED module light distribution: extreme wide beam luminaire head: made of die cast aluminium, powder coated DB 703; other colours on request flat, clear toughened glass glazing, to be hinged down via a plug and socket connector within the luminaire head for top entry ø 42mm up to mm, inclination 0, 5 resp. (supply state 5 ) or for side entry ø 42mm up to mm; easy installation; delivered in one piece column, adapter for top entry mm, wall, corner or column bracket - to be ordered separately application areas: schools, factory premises, residential and local distributor roads, main streets, pedestrian and cycle lanes, car parks LLM LED 16W/1,800lm/3,000K LLM LED 26W/3,000lm/3,000K hot-dip galvanised steel / hot-dip galvanised steel, DB 703 wall bracket, inclination 2, length: mm WA 71-2 / WA /.714 corner bracket, inclination 2, length: mm EA 61-2 / EA /.614 adapter RS 76/60 for post top mm RS 76/ /.07 class II at extra cost (add S at the end) adapter RS 76/60 3 x M wall bracket WA 71-2 WA x corner bracket EA 61-2 EA x 90 ø

9 industrial outdoor luminaire in stock post top - / side entry luminaire ASL 2007 WUFF LED 220V 240V / 50Hz 60Hz EN optical system: IP 65 component area: IP 43 recom. pole height: 3.00m 8.00m light standards: medium lighting requirements incl. 1 WUFF LED module; easy to replace colour temperature: 4,000K neutral white; 3,000K on request LED gear: electronic driver, up to 50,000 hours LED life expectancy: > 55,000 hours/l 80/B 10 for minimum maintenance optical system: directed light (multi layer) provided by an exchangeable, anti-aging lens technology light distribution: asymmetrical wide beam luminaire head: made of cast and die cast aluminium, powder coated DB 703; other colours on request clear toughened glass glazing, to be hinged down completely wired; via a clamp within the luminaire head for top entry ø 42mm up to mm, inclination 0, 5 resp. or for side entry ø 42mm - mm; dispatch standard: post top, 5 cable, adapter RS 76/60 for post top mm column, pole accessories, wall, corner or column bracket - to be ordered separately application areas: parkways, cycle lanes, residential and local distribution roads, boulevards, pedestrian zones, car parks, schools, home for elderly people, hotels, factory premises, squares WUFF LED 34W/3,600lm/4,000K hot-dip galvanised steel / hot-dip galvanised steel, DB 703 wall bracket, inclination 2, length: mm WA 71-2 / WA /.714 corner bracket, inclination 2, length: mm EA 61-2 / EA /.614 adapter RS 76/60 for post top mm RS 76/ /.07 class II at extra cost (add S at the end) adapter RS 76/60 3 x M wall bracket WA 71-2 WA x corner bracket EA 61-2 EA x 90 ø

10 industrial outdoor luminaire in stock post top - / side entry luminaire ASL 2010/1 EN IP 65 LLB: 230V / 50Hz EB: 220V 240V / 50Hz 60Hz windage area: 0,105 (on the side) / 0,045 (front) recom. pole height: 4.50m 10.00m light standards: low, medium and high lighting requirements excl. metal halide, sodium or compact fluorescent lamp; incl. CosmoPolis gear: HCI and NAV: incl. low loss ballast, ignitor and condensator; electronic ballast on request; CDO, CPO, compact fluorescent incl. electronic ballast light control: at extra cost: power reduction, dimming, night switch optical system: reflector system for clear, tubular high pressure or for compact fluorescent lamps light distribution: asymmetrical wide beam luminaire head: made of cast and die cast aluminium, powder coated DB 703; other colours on request polycarbonate, clear, impact resistant, UV-stabilised, to be hinged down via a plug and socket connector within the luminaire head for top entry mm and mm, inclination 5 resp. 10 or for side entry mm; dispatch standard: for top entry, 5 lamp (except for CPO), cable, column, pole accessories, wall, corner or column bracket - to be ordered separately application areas: parkways, cycle lanes, residential and local distribution roads, main streets, boulevards, pedestrian zones, car parks, schools, home for elderly people, hotels, factory premises, squares, pedestrian crossings lamp socket kg product code 1 x HCI-TT 70W E x NAV-T 70W E x NAV-T 50/70W* E x HCI-TT/NAV-T W E singel bracket MA / hot dip galvanised steel / hot dip galvanised steel, DB 703 singel bracket, inclination:, length: mm, for top entry mm MA , /.764 douple bracket, inclination:, length: mm, for top entry mm ZMA , /.764 tripple bracket, inclination:, length: mm, for top entry mm DMA , /.764 wall bracket, inclination, length: mm WA / WA , /.714 wall and corner bracket, inclination, length: mm WEA WEA , /.604 douple bracket ZMA tripple bracket DMA x M8 6 x M8 wall bracket WA WA wall and corner bracket WEA WEA x x 90 ø 12 * switchable class II at extra cost (add S at the end) x M

11 industrial outdoor luminaire in stock post top - / side entry luminaire ASL 2010/1 LED EN IP V 240V / 50Hz 60Hz windage area: 0,105 (on the side) / 0,045 (front) recom. pole height: 4.50m 10.00m light standards: low, medium and high lighting requirements incl. 1 or 2 glare-free LLM LED module(s) colour temperature: 3,000K warm white, 4,000K neutral white gear: electronic driver, up to 100,000 hours; driver with integrated Constant Light Output (CLO) in order to keep the luminous flux the same over the entire life time LED life expectancy: up to 50,000 hours/l 100 for minimum maintenance light control: at extra cost: power reduction, dimming, night switch or CLEVER LIGHT optical system: reflector system for directed, horizontally mounted LLM LED module(s) light distribution: extreme wide beam luminaire head: made of cast and die cast aluminium; powder coated DB 703; other colours on request polycarbonate, clear, impact resistant, UV-stabilised, to be hinged down via a plug and socket connector within the luminaire head for top entry mm and mm, inclination 5 resp. 10 or for side entry mm; dispatch standard: for top entry, 5 cable, column, pole accessories, wall, corner or column bracket - to be ordered separately application areas: parkways, cycle lanes, residential and local distribution roads, main streets, boulevards, pedestrian zones, car parks, schools, home for elderly people, hotels, factory premises, squares, pedestrian crossings LLM LED 16W/1,800lm/3,000K LLM LED 26W/3,000lm/3,000K singel bracket MA / hot dip galvanised steel / hot dip galvanised steel, DB 703 singel bracket, inclination:, length: mm, for top entry mm MA , /.764 douple bracket, inclination:, length: mm, for top entry mm ZMA , /.764 tripple bracket, inclination:, length: mm, for top entry mm DMA , /.764 wall bracket, inclination, length: mm WA / WA , /.714 wall and corner bracket, inclination, length: mm WEA WEA , /.604 class II at extra cost (add S at the end) douple bracket ZMA tripple bracket DMA x M8 6 x M8 6 x M8 wall bracket WA WA wall and corner bracket WEA WEA x x 90 ø

12 decorative outdoor luminaire in stock post top luminaire EVA I WUFF LED EN IP V 240V / 50Hz 60Hz recom. pole height: 3.00m 5.00m light standards: medium lighting requirements incl. 1 WUFF LED module, easy to replace colour temperature: 3,000K warm white; 4,000K neutral white on request LED gear: electronic driver, up to 50,000 hours LED life expectancy: > 55,000 hours/l 80/B 10 for minimum maintenance light control: at extra cost: dimming optical system: directed light (multi layer) provided by an exchangeable, anti-aging lens technology light distribution: wide beam or symmetrical luminaire head: incl. canopy made of aluminium with a special white, reflective underside finish; base made of corrosion-resistant cast aluminium; powder coated bracket: 2arm: incl. double bracket made of hot dip galvanised steel, powder coated RAL or DB polyethylene, opal, impact resistant completely wired; via a plug and socket connector below the luminaire head for post top mm cable, column, pole accessories to be ordered separately application areas: residential and local distribution roads, car parks, schools, hotels, factory premises, paths, squares, parks wide beam WUFF LED 34W/3,600lm/3,000K symmetrical WUFF LED 34W/3,600lm/3,000K class II at extra cost (add S at the end)

13 decorative outdoor luminaire in stock post top luminaire RICHARD IV/R U LED EN IP V 240V / 50Hz 60Hz total height: 3.00m 5.00m light standards: low and medium lighting requirements incl. 1 glare-free U LED module colour temperature: 3,000K warm white; 4,000K neutral white on request LED gear: incl. electronic driver up to 100,000 hours; high efficiency factor of 94%, with soft start function and Constant Light Output (CLO) in order to keep the luminous flux the same over the entire life time LED life expectancy: up to 50,000 hours/l 100 with CLO resp. up to 100,000 hours/ L90 without CLO for minimum maintenance costs due to an excellent thermal management light control: at extra cost: dimming; power reduction; external change of dim settings subsequently or CLEVER LIGHT optical system: louvre system with vertically mounted lamps for wide spacings; with extra inner laying satined anti-glare tube light distribution: symmetrical, asymmetrical or asymmetrical with back shield luminaire head: canopy made of aluminium; base made of corrosion-resistant cast aluminium; powder coated RAL or DB PMMA RESIST, clear, high-impact resistant completely wired; via a plug and socket connector outside the luminaire head for post top mm column, pole accessories to be ordered separately application areas: residential and local distributor roads, car parks, schools, hotels, factory premises, paths, squares, parks product family: additionally deliverable: bollards, bollards column, wall luminaire symmetrical light distribution U LED 12W/2,000lm/3,000K U LED 17W/3,000lm/3,000K asymmetrical light distribution U LED 17W/3,000lm/3,000K U LED 24W/4,000lm/3,000K class II at extra cost (add S at the end)

14 decorative outdoor luminaire in stock post top luminaire RICHARD IV/U-A LED EN IP V 240V / 50Hz 60Hz recom. pole height: 3.00m 5.00m light standards: for low and medium lighting requirements incl. 1 glare-free U-A LED module colour temperature: 3,000K warn white or 4,000K neutral white; CRI 80 LED gear: electronic driver with constant power, up to hours, high efficiency factor of 94%; with soft start function LED life expectancy: up to 100,000 hours/l 80 for minimum maintenance optical system: vertically mounted directed U-A LED module for wide spacings, diffuse light distribution: symmetrical or asymmetrical luminaire head: canopy made of aluminium with special white paint on the underside, base made of corrosionresistant cast aluminium, powder coated PMMA RESIST, satined, high-impact RAL or DB via a plug and socket connector outside the luminaire head; easy installation for top entry mm accessories: column, cable, pole accessories - to be ordered separately application areas: residential and local distributor roads, car parks, schools, hotels, factory premises, paths, squares, parks symmetrical light distribution U-A LED 17W/1,600lm/3,000K asymmetrical light distribution U-A LED 17W/1,600lm/3,000K class II at extra cost (add S at the end)

15 industrial outdoor luminaire in stock side entry luminaire ASL 70 EN IP 54 LLB: 230V / 50Hz EB: 220V 240V / 50Hz 60Hz recom. pole height: m light standards: for low and medium lighting requirements excl. metal halide lamp or sodium lamp gear: incl. low loss ballast (LLB), ignitor, condensator; electronic ballast (EB) on request light control: at extra cost: power reduction optical system: computer-optimised reflector made of highest grade aluminium, polished and anodised for high pressure lamps light distribution: asymmetrical wide beam luminaire head: cap made of plastics, impact resistant and glass fibre reinforced removable and captive; carrying housing made of corrosion resistant cast aluminium with inner white special paint; dyed and powder coated RAL 7042 (traffic grey A) or at extra cost: RAL 5015 (pigeon blue) clear, high-quality acrylic, partly textured, with stainless steel fastener via a clamp within the luminaire head for side entry ø 42mm up to ø 48mm lamp, adapter AS 76 for post top mm, adapter AS 60 for post top mm, column, wall, corner or column bracket - to be ordered separately application areas: schools, factory premises, residential and local distributor roads, pedestrian and cycle lanes, car parks 452 lamp socket kg product code protection class I, traffic gray A 1 x NAV-E 70W E x NAV-E 50/70W E protection class II traffic gray A 1 x NAV-E 70W E S 209 ø 42 / 48 made cast aluminium, traffic gray A / pigeon blue A AS /.40 A AS /.40 made of hot dip galvanised steel B double bracket C tripple bracket D wall and corner bracket A 105 ø 48 B ø 48 C ø 48 D ø / 260

16 industrial outdoor luminaire in stock wall / corner luminiare ASL 70 UNIVERSAL KIT EN IP 54 LLB: 230V / 50Hz EB: 220V 240V / 50Hz 60Hz mounting height: m light standards: for low and medium lighting requirements incl. metal halide lamp or sodium lamp gear: incl. low loss ballast (LLB), ignitor, condensator; electronic ballast (EB) on request light control: at extra cost: power reduction optical system: computer-optimised reflector made of highest grade aluminium, polished and anodised for high pressure lamps light distribution: asymmetrical wide beam luminaire head: cap made of plastics, impact resistant and glass fibre reinforced removable and captive; carrying housing made of corrosion resistant cast aluminium with inner white special paint; dyed and powder coated, incl. bracket for wall or corner installation RAL 7042 (traffic grey A) clear, high-quality acrylic, partly textured, with stainless steel fastener via a clamp within the luminaire head to be screwed to the wall fixing material for wall installation to be ordered separately application areas: schools, factory premises, residential and local distributor roads, pedestrian and cycle lanes, car parks 452 lamp socket kg product code protection class I, traffic gray incl. wall and corner bracket and incl. lamp x NAV-E 70W E protection class II xxxx

17 industrial outdoor luminaire in stock post top luminaire ALAN I LED recom. pole height: 4.00m 8.00m light standards: for medium and high lighting requirements incl. 24 x 2.4W Cree high power LEDs on 6 high quality printed circuit boards; boards simply replaceable ALAN I: 2,980lm effective/75w total power ALAN II: 4,005lm effective/63w total power colour temperature: ALAN I: 6,500K cool white ALAN II: 4,500K neutral white LED gear: electronic driver, ALAN I: 50,000 hours, ALAN II: 85,000 hours LED life expectancy: 50,000 hours or 85,000 hours/l 70 for minimum maintenance costs due to an excellent thermal management light control: ALAN II: at extra cost dimming optical system: specially developed LEDs with spot and filling lenses for extreme wide spacings light distribution: extreme wide beam luminaire head: corrosion-resistant, die cast aluminium, powder coated ALAN I: RAL 9007 or DB 703 ALAN II: DB 703 polycarbonate, clear, impact resistant, UV-stabilised completely wired; via a clamp within the luminaire head; luminaire head to be hinged upward for top entry mm or mm cable, column- and wall bracket, column, pole accessories to be ordered separately application areas: residential and local distribution roads, main streets, car parks, factory premises, hotels, holiday parks / LED Modul 58W/2,980lm/6,500K wall bracket - hot dip galvanised steel, powder coated WA class II at extra cost (add S at the end) / 200

18 spot in stock small spot KSW EN IP V / 50Hz light standards: gear: optical system: housing: application areas: low, medium and high lighting requirements excl. halide lamp, sodium lamp or metal halide lamp halide without gear incl. low loss ballast, ignitor and condensator reflector made of highest grade aluminium, polished and anodised with adjustable bracket made of hot dip galvanised steel and frame made of premium cast aluminium, powder coated RAL 9005 (deep black) or RAL 9016 (traffic white) toughened glass glazing, thermal resistant via a clamp inside the luminaire wall bracket to be ordered separately to be screwed on a traverse on site or on ground spike or in the wall lamp, cable, traverse, ground spike with 400mm length, wall bracket to be ordered separately for the illumination of ways, squares, trees, facades, sculptures and logos b L h1 lamp L b h h1 kg s/w prpoduct code h 120 NAV-E s HCI-TS 70W s HCI-TS W s bis 500W s bis 500W w bis 1000W s W s hot dip galvanised steel / powder coated ground spike ES KSW /.104 wall bracket WA KSW WA KSW 800 ø 11 20

19 decorative outdoor luminaire in stock bollard PETRA PA I/600 LED PETRA PA III/600 LED PETRA PA I/600 LED PETRA PA III/600 LED EN IP V 240V / 50Hz 60Hz total height: 0.6m light standards: for low lighting requirements incl. LED module colour temperature: 2,700K warm white gear: ballast integrated in lamp LED life expectancy: up to 25,000 hours/l 70 light control: at extra cost: dimming optical system: vertically mounted light source; diffuse light distribution: PETRA PA I/600: asymmetrical, 1 window PETRA PA III/600: symmetrical, 2 windows luminaire body: made of aluminium; powder coated RAL or DB PMMA RESIST, opal, high-impact resistant via a plug and socket connector within the luminaire head tube with flange plate to be screwed on a concrete foundation on site or on an additional bolt-on root; delivery in one piece; lamp separately packed accessories: cable, bolt-on root incl. screws and accessory ring to be ordered separately application areas: parkways, schools, hotels, factory premises, paths, squares, beer gardens, camping-sites lamp socket kg product code PETRA PA I/600 asymmetrical, 1 window LED 8W/806lm/2,700K E AL 600 ø 100 ø bolt-on root G180 3 x M10x25 accessory ring Z180 PETRA PA III/600 symmetrical, 2 windows LED 8W/806lm/2,700K E AL ø 180 ø 180 ø ø 105 ø 180 bolt-on root G180 incl. screws accessory ring Z180, powder coated class II at extra cost (add S at the end) PETRA PA I/600 PETRA PA III/

20 luminaire system in stock post top luminaire FRIEDER II FF LED recom. pole height: 3.50m m light standards: low, medium and high lighting requirements incl. 1 FF II-X LED module colour temperature: 3,000K warm white or 4,000K neutral white gear: electronic driver, up to hours; driver with integrated Constant Light Output (CLO) in order to keep the luminous flux the same over the entire life time LED life expectancy: up to 50,000 hours/l 100 for minimum maintenance light control: at extra cost: power reduction or CLEVER LIGHT optical system: directed light (multi layer) provided by an exchangeable, anti-aging lens technology light distribution: asymmetrical wide beam luminaire head: made of die cast aluminium, powder coated bracket: with short bracket made of hot dip galvanised steel; powder coated RAL 7043 (traffic grey) flat, clear toughened glass glazing, to be hinged down completely wired; via a clamp within the luminaire head for top entry mm lamp, cable, cable junction box, column, pole accessories to be ordered separately application areas: parkways, schools, home for elderly people, hotels, factory premises, paths, squares, car parks FF LED II-X 25W/3,800lm/4,000K FF LED II-X 56W/7,600lm/4,000K class II at extra cost (add S at the end)

21 outdoor luminaire in stock ground recessed luminaire BES III/2 EN IP 67 IK V/ 50Hz light standards: for low and medium lighting requirements excl. metal halide lamp gear: incl. low loss ballast, ignitor and condensator optical system: computer-optimised reflector made of highest grade aluminium, polished and anodised light distribution: asymmetrical or symmetrical beam: 8 / 10, lamp adjustable housing: made of aluminium sump: with sump tube made of polyamide bezel: made of stainless steel, brushed and passivated toughened glass, clear or satinied (12mm thick) load capacity: up to 2.5 t per wheal incl. 1 cable max. 3 x 1.5mm², 0.5m to be set into the ground. Ensure good drainage and avoid water stagnation; delivery in one piece accessories: lamp, cable, cover to be ordered separately application areas: for the illumination of trees, facades, sculptures, logos ø /10 8 /10 8 / ø 249 cover O1 1x 110 cover O3 3 x 110 lamp socket beam kg product code sump clear glazing 1 x HCI-T 70 W G12 8 / satined glazing xxxx.0329 cover - cast aluminium O1-1 window/1 x O3-3 windows/3 x

22 outdoor luminaire in stock ground recessed luminaire BES III/7 LED EN IP 67 IK V 240V / 50Hz 60Hz light standards: low and medium lighting requirements incl. 1 LED lense module colour temperature: 3.000K warm white gear: electronic driver, up to 50,000 hours/b 10 LED life expectancy: up to 50,000 hours/l 70 for minimum maintenance optical system: reflector with lenses, adjustable +/-10 light distribution: symmetrical beam: 20 housing: made of aluminium sump: incl. sump made of polyamide bezel: made of stainless steel V2A (304), brushed and passivated toughened glass glazing, clear (12mm thick); load capacity: up to 2.5 t per wheal incl. 1 cable max 3 x 1.5mm² to be set into the ground; ensure good drainage and avoid water stagnation application areas: for the illumination of ways, squares and trees, facades, sculptures, logos ø 230 +/ lamp beam kg product code LED 8.4W/455lm/3,000K ø 210

23 outdoor luminaire in stock ground recessed luminaire BES III/10 LED EN IP 67 IK V 240V / 50Hz 60Hz light standards: low and medium lighting requirements incl. 1 LED lense module colour temperature: 3,000K warm white gear: electronic driver, up to 50,000 hours/b 10 LED life expectancy: up to 50,000 hours/l 70 for minimum maintenance optical system: reflector system for COB LEDs, not adjustable light distribution: symmetrical beam: 38 housing: made of aluminium sump: incl. sump made of polyamide bezel: made of stainless steel V2A (304), brushed and passivated toughened glass glazing, clear (12mm thick); load capacity: up to 2.5 t per wheal incl. 1 cable max 3 x 1.5mm² to be set into the ground; ensure good drainage and avoid water stagnation application areas: for the illumination of ways, squares and trees, facades, sculptures, logos ø lamp beam kg product code LED 8.4W/455lm/3,000K ø 210

24 outdoor luminaire in stock ground recessed luminaire BES III/45 LED EN IP 67 IK V 240V / 50Hz 60Hz light standards: low and medium lighting requirements incl. 1 LED lense module colour temperature: 3,000K warm white gear: electronic driver, up to 50,000 hours/b 10 LED life expectancy: up to 50,000 hours/l 70 for minimum maintenance optical system: reflector system for COB LEDs, not adjustable light distribution: symmetrical beam: 38 housing: made of aluminium sump: incl. sump made of polyamide bezel: made of stainless steel V2A (304), brushed and passivated toughened glass glazing, clear (12mm thick); load capacity: up to 2.5 t per wheal incl. 1 cable max 3 x 1.5mm² to be set into the ground; ensure good drainage and avoid water stagnation application areas: for the illumination of ways, squares and trees, facades, sculptures, logos ø lamp beam kg product code LED 31W/4,240lm/3,000K ø 250

25 urban furniture bench LAURA B I/3 dimensions: length 1.390mm, width 615mm, hight 890mm seat height: 455mm metal parts: seat area and circular base made of stainless steel V2A (304), powder coated RAL 9006 with flange plate ø 250mm for paving promenades, parks, boulevards, schools, hotels, home for eldery people, railway stations, factory premises, pedestrian lanes, squares, curches, cemeteries product kg product code flange plate for paving stainless steel, powder coated with flange plate for paving mod Technical specifications are subject to change without notice ø 168 ø