Tubular fittings Tubular fluorescent fitting XFF - Zones 1, 2 & 21, 22
|
|
|
- Bernard Fox
- 6 years ago
- Views:
Transcription
1 Tubular fluorescent fitting XFF - Zones 1, & 1, Features All components mounted on sliding gear tray for easy installation and maintenance Standard components used inside body allowing reduced maintenance costs Available in polycarbonate (light, high impact resistant) or in glass (specific chemical environment & paint shop) Including accessories (cable gland, plug & fixing brackets) Supplied with offshore grade paint Specifications Manufactured from marine grade aluminium alloy copper free UV protected polycarbonate tube - thickness.5mm or borosilicate glass - thickness 7mm Rated voltage Vac/Vdc, 50-60Hz Wiring configuration: 5 wires xentries 3/4 NPT Emergency version (Type: EM version 3h battery duration) Certifications Standards Approved to: EN , , EC Type examination Directive 94/9/EC certificate to: INERIS 11 ATEX 0051X Ex II G Ex d IIC T6 Gb for -0 C to + 55 C Ex d IIC T6 Gb for -0 C to + 55 C (XFR10V, XFF0V, XFR136V, XFF36V, XFR155V, XFF55V) Ex d IIB T6 Gb for -0 C to + 55 C (XFR140V, XFR165V, XFF40V, XFF65V) Ex II D Ex tb IIIC T80 C Db IP66 for -0 C to + 55 C Glow wire test: 960ºC EN Ambient -0 C to +55ºC XFF, temperature range: -10 C to +50ºC XFF EM IP test: IP66 IEC 6059 (001) Impact protection index: IK09 (poly) IK07 (glass) according to IEC 66 ABB DTS - Light fittings, boxes & custom built control panels for hazardous areas LIT-140 UK 01/15 /7
2 Tubular fluorescent fitting XFF - Zones 1, & 1, A 3 B Bouchon 3/4 NPT PE 3/4 NPT XFF Dimensional drawing Technical specifications Light Current External dimensions mm Type Wiring Configuration Rating W A 30V Diffuser A B Weight kg 5 wires: Polycarbonate Diffuser Equipped with 1 cable gland & 1 plug XFR10-0G000 5 wires 1 x Polycarbonate XFR136-0G000 5 wires 1 x PL Polycarbonate XFR140-0G000 5 wires 1 x Polycarbonate XFR155-0G000* 5 wires 1 x PL Polycarbonate XFR165-0G000 5 wires 1 x Polycarbonate XFF0-0G000 5 wires x Polycarbonate XFF36-0G000 5 wires x PL Polycarbonate XFF40-0G000 5 wires x Polycarbonate XFF55-0G000* 5 wires x PL Polycarbonate XFF65-0G000 5 wires x Polycarbonate wires: Glass Diffuser Equipped with 1 cable gland & 1 plug XFR10V-0G000 5 wires 1 x Glass XFR136V-0G000 5 wires 1 x PL Glass XFR140V-0G000 5 wires 1 x Glass XFR155V-0G000* 5 wires 1 x PL Glass XFR165V-0G000 5 wires 1 x Glass XFF0V-0G000 5 wires x Glass XFF36V-0G000 5 wires x PL Glass XFF40V-0G000* 5 wires x Glass XFF55V-0G000 5 wires x PL Glass XFF65V-0G000 5 wires x Glass * T5 for gas or T95 C for dust when supply is 40Vac Technical information Fluorescent Lamp (order separately) T8 bi-pin tube, lampholder G13, diameter 6mm - white industry 4000 K Compact PL lamp, lampholder G11. Photometric curve See page 6/10 Rated voltages Electronic ballast: Vac/Vdc, 50-60Hz. Power factor Terminal block (screws plug in terminal block) 10mm² (rigid wire), 6mm² (flexible wire) Terminals supplied L1, L, L3, N, PE (looping possible with one additional cable gland). Wiring Configuration 5 wires Cable entries Two entries 3/4 NPT Included: One 3/4 nickel plated brass plug (EXN/075/SP) and one 3/4 nickel plated brass cable gland for non armoured cable, diameter 6-1mm (EXN05ASC3) Casting Marine grade aluminium alloy according to standard: EN 1706: EN AC-AlSi1 (Fe) DF or EN AC-AlSi 10Mg(A) DF UV protected extruded polycarbonate tube, thickness.5mm or borosilicate glass thickness 7mm Colour of casting (standard) l XF****-0G000 - Yellow offshore, RAL 1003 Colour options: l XF****-BG000 - Grey, RAL 7035 l XF****-CG000 - Black, RAL 9004 l XF****-DG000 - Hammered Blue, RAL 5015 l XF****-FG000 - Red, RAL 3001 l XF****-GG000 - Blue, RAL 5010 l XF****-JG000 - Green, RAL 603 m XF****-MG000 - White, RAL 9010 Fixing (included) D03 -x zinc plated steel articulated brackets for ceiling mounting /8 ABB DTS - Light fittings, boxes & custom built control panels for hazardous areas LIT-140 UK 01/15
3 Emergency tubular fluorescent fitting - 3h XFF EM - Zones 1, & 1, Technical specifications Light Current External dimensions mm Type Wiring Configuration Rating W Battery h A 30V Diffuser A B Weight kg 3 wires: Polycarbonate Diffuser Equipped with 1 cable gland & 1 plug XFR10EM-0G000 3 wires 1 x 18 3h 0.15 Polycarbonate XFR140EM-0G000 3 wires 1 x 36 3h 0.0 Polycarbonate XFR165EM-0G000 3 wires 1 x 58 3h 0.5 Polycarbonate XFF0EM-0G000 3 wires x 18 3h 0.30 Polycarbonate XFF40EM-0G000 3 wires x 36 3h 0.40 Polycarbonate XFF65EM-0G000 3 wires x 58 3h 0.50 Polycarbonate wires: Glass Diffuser Equipped with 1 cable gland & 1 plug XFR10VEM-0G000 3 wires 1 x 18 3h 0.15 Glass XFR140VEM-0G000 3 wires 1 x 36 3h 0.0 Glass XFR165VEM-0G000 3 wires 1 x 58 3h 0.5 Glass XFF0VEM-0G000 3 wires x 18 3h 0.30 Glass XFF40VEM-0G000 3 wires x 36 3h 0.40 Glass XFF65VEM-0G000 3 wires x 58 3h 0.50 Glass Electrical Features Fluorescent Lamp (order separately) T8 bi-pin tube, lampholder G13, diameter 6mm - white industry 4000 K Compact PL lamp, lampholder G11. Photometric curve See page 6/10 Rated voltages Electronic ballast: 0-40Vac/Vdc 50/60Hz Power factor Battery NiCd 7,V Lumen output in emergency mode (1 lamp lit) hours: 40% for XFR10, XFF0, 33% for XFR140, XFF40, 10% for XFR165, XFF65 3 hours: 4% for XFR10, XFF0, 18% for XFR140, XFF40, 8% for XFR165, XFF65 Monitored by one LED Terminal block (screws plug in terminal block) Up to 10mm² (rigid wire), 6mm² (flexible wire) Terminals supplied L1,, N, PE (looping possible with one additional cable gland). Wiring Configuration 3 wires Cable entries Two entries 3/4 NPT Included: One 3/4 nickel plated brass plug (EXN/075/SP) and one 3/4 nickel plated brass cable gland for non armoured cable, diameter 6-1mm (EXN05ASC3) Casting Marine grade aluminium alloy according to standard: EN 1706: EN AC-AlSi1 (Fe) DF or EN AC-AlSi 10Mg(A) DF UV protected extruded polycarbonate tube, thickness.5mm or borosilicate glass thickness 7mm Colour of casting (standard) l XF****-0G000 - Yellow offshore, RAL 1003 Colour options: l XF****-BG000 - Grey, RAL 7035 l XF****-CG000 - Black, RAL 9004 l XF****-DG000 - Hammered Blue, RAL 5015 l XF****-FG000 - Red, RAL 3001 l XF****-GG000 - Blue, RAL 5010 l XF****-JG000 - Green, RAL 603 m XF****-MG000 - White, RAL 9010 Fixing (included) D03 -x zinc plated steel articulated brackets for ceiling mounting Emergency function diagrams Wiring provided by DTS - Maintained Mode Switch between L/ - Non Maintained Mode * L L 1 0 Mains Supply Tube Battery ON Lit Charged OFF Only emergency tube lit Discharged Mains Supply Tube Battery ON OFF Charged OFF Only emergency tube lit Discharged * This table corresponds to the position 0 open. If the switch is on position 1 close, refer to the table on the left ABB DTS - Light fittings, boxes & custom built control panels for hazardous areas LIT-140 UK 01/15 /9
4 Accessories XFF - Zones 1, & 1, Bi-pin T8 fluorescent lamps Specifications: G13 - ø 6mm Colour temperature: White industry 4000 K CRI: > 80 lm/w: 65 to 93 Average operating life: 1,000 hours Type Power W Lumen output lm Lampholder TL18W G13 TL36W G13 TL58W G13 Compact fluorescent lamps Specifications: G11 Colour temperature: White industry 4000 K CRI: > 80 lm/w: 57 to 87 Average operating life: 0,000 hours Type Power W Lumen output lm Lampholder PL18W G11 PL36W G11 PL55W G11 Brackets R 55 Ø Ø8 Ø Hinged bracket D03 x zinc plated steel articulated brackets for ceiling mounting (included with product) D04 x stainless steel 304L articulated brackets for ceiling mounting Accessories U-bolt for pole mounting D05 x U-bolt and x zinc plated steel brackets for pole mounted 1 1/4 D06 x U-bolt and x zinc plated steel brackets for pole mounted 1 1/ D07 x U-bolt and x zinc plated steel brackets for pole mounted D09 x U-bolts and x stainless steel brackets (304L) for pole mounted 1 1/ D030 x U-bolts and x stainless steel brackets (304L) for pole mounted Shock proof kit D034 Stainless steel 304L canopy and shock proof kit for XFR10, XFF0 D035 Stainless steel 304L canopy and shock proof kit for XFR140, XFF40 D036 Stainless steel 304L canopy and shock proof kit for XFR165, XFF65 /10 ABB DTS - Light fittings, boxes & custom built control panels for hazardous areas LIT-140 UK 01/15
5 Spare parts XFF - Zones 1, & 1, Spare parts Type D0010WC D00140WC D00165WC D001V0WC D001V40WC D001V65WC D003 D0051X0WE D0051X0WEM D0051X36WE D0051X40WE D0051X40WEM D0051X55WE D0051X65WE D0051X65WEM D005X0WE D005X0WEM D005X36WE D005X40WE D005X40WEM D005X55WE D005X65WE D005X65WEM D010 D010PL D016 4GRA0000S EXN05ASC3-01 Specifications Sealed polycarbonate tube, cover, gasket, chain and slides - Offshore grade yellow paint RAL XFF0, XFR10, XFR136, XFF36 Sealed polycarbonate tube, cover, gasket, chain and slides - Offshore grade yellow paint RAL XFF40, XFR140, XFF55, XFR155 Sealed polycarbonate tube, cover, gasket, chain and slides- Offshore grade yellow paint RAL XFF65, XFR165 Sealed glass tube, cover, gasket, chain and slides- Offshore grade yellow paint RAL XFF0, XFR10, XFR136, XFF36 Sealed glass tube, cover, gasket, chain and slides- Offshore grade yellow paint RAL XFF40, XFR140, XFF55, XFR155 Sealed glass tube, cover, gasket, chain and slides - Offshore grade yellow paint RAL XFF65, XFR165 Gasket Gear tray with electronic ballast Vac/Vdc, Hz for XFR10 Emergency Gear tray with electronic ballast 0-40Vac/Vdc, Hz for XFR10EM Gear tray with electronic ballast Vac/Vdc, Hz for XFR136 Gear tray with electronic ballast Vac/Vdc, Hz for XFR140 Emergency Gear tray with electronic ballast 0-40Vac/Vdc, Hz for XFR140EM Gear tray with electronic ballast Vac/Vdc, Hz for XFR155 Gear tray with electronic ballast Vac/Vdc, Hz for XFR165 Emergency Gear tray with electronic ballast 0-40Vac/Vdc, Hz for XFR165EM Gear tray with electronic ballast Vac/Vdc, Hz for XFF0 Emergency Gear tray with electronic ballast 0-40Vac/Vdc, Hz for XFF0EM Gear tray with electronic ballast Vac/Vdc, Hz for XFF36 Gear tray with electronic ballast Vac/Vdc, Hz for XFF40 Emergency Gear tray with electronic ballast 0-40Vac/Vdc, Hz for XFF40EM Gear tray with electronic ballast Vac/Vdc, Hz for XFF55 Gear tray with electronic ballast Vac/Vdc, Hz for XFF65 Emergency Gear tray with electronic ballast 0-40Vac/Vdc, Hz for XFF65EM Lampholder for T8 lamp Lampholder for PL lamp Battery pack for XFF EM Grease Kit 3/4 NPT Exd Exe IIC Ex-td nickel plated cable gland for non armoured cable diameter 6,0-1,0mm ABB DTS - Light fittings, boxes & custom built control panels for hazardous areas LIT-140 UK 01/15 /11
Tubular fittings Tubular fluorescent fitting with automatic switch off XFP - Zones 1, 2 & 21, 22
Tubular fluorescent fitting with automatic switch off Features Quick and easy insulation switch for safe maintenance Ex e integral junction box All components mounted on sliding gear tray for easy installation
Linear fittings EVS fluorescent fitting with easy disconnect - zones 1, 2, 21 & 22
ABB DTS LINEAR FITTINGS - EVS FLUORESCENT FITTING - S, 2, 2 & 22 59 EVS fluorescent fitting with easy disconnect - zones, 2, 2 & 22 Features Easy disconnect without wiring to remove the gear tray All components
Floodlight fittings HPS, MH or Halogen Floodlight fitting XSF, XQF, XEF - Zones 1, 2
Features Wide or narrow beam Ex e integral junction box Flat or pole mounting Supplied with lamp installed Including accessories (cable gland & plug) Supplied with offshore grade paint Manufactured from
Linear fittings Fluorescent fitting EVN - Zones 2 & 22
Fluorescent fitting Features Double central locking for ingress protection All components mounted on hinged and removable gear tray which gives easy access for maintenance Including accessories (cable
Wellglass fittings EVH, EVX Wellglass fitting all zones - zones 1, 2, 21 & 22
WELLGLASS - EVH, EVX WELLGLASS FITTING - S 1, 2, 21 & 22 127 Wellglass fittings Features Compact design for easy installation For diffuse or ambient light Compatible with energy saving lamps or discharge
Linear fittings EVDL LED fitting - zones 21, & 22
ABB DTS LINEAR FITTINGS - EVDL LED FITTING - ZONES 21 & 22 77 Linear fittings EVDL LED fitting - zones 21, & 22 LED Features Operating life up to 100 000 h High lumen output - 5 000 lumens with 100% yield
Linear fittings EVN Fluorescent fitting - zones 2 & 22
LIEAR FITTIGS - EV FLUORESCET FITTIG - ZOES 2 & 22 71 EV Fluorescent fitting - zones 2 & 22 Features Double central locking for ingress protection All components mounted on hinged and removable gear tray
Linear fittings EVTL Weatherproof LED fitting - Industrial applications
89 Linear fittings LED Features Operating life up to 100 000 h High lumen output - 5 000 lumens with 100% yield - LED module with diffuser Double central locking for ingress protection All components mounted
Linear fittings EVNL LED fitting - zones 2, & 22
65 Linear fittings EVNL LED fitting - zones 2, & 22 LED Features Operating life up to 100 000 h High lumen output - 5 000 lumens with 100% yield - LED module with diffuser Double central locking for ingress
Linear fittings EVTL Weatherproof LED fitting - Industrial applications
89 Linear fittings LED Features Operating life up to 100 000 h High lumen output - 5 000 lumens with 100% yield - LED module with diffuser Double central locking for ingress protection All components mounted
Linear fittings EVT Weatherproof fluorescent fitting - Industrial applications
LIEAR FITTIGS - EVT FLUORESCET FITTIG - IDUSTRIAL APPLICATIOS 95 Features Double central locking for ingress protection All components mounted on hinged and removable gear tray which gives easy access
Linear Luminaire for Fluorescent Lamps Series ECOLUX METAL 6010/1
> For use in Zones 1, 2, 21, 22 and safe area > 2-lamp version: 18 W 36 W > Housing made of sheet steel or stainless steel SS304 / > Quick fasteners www.stahl.de 15709E00 The light fittings of Series ECOLUX
Linear fittings EVD Fluorescent fitting - zones 21 & 22
DTS LIER FITTIGS - EVD FLUORESET FITTIG - ZOES 21 & 22 83 EVD Fluorescent fitting - zones 21 & 22 Features Double central locking for ingress protection ll components mounted on hinged and removable gear
Linear Luminaire with LED Series EXLUX 6002/2 Version IIC
> For use in hazardous areas with gas group IIC > Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or pole mounted light fitting > Central locking
Floodlight LED Series 6125
www.stahl.de > Floodlight Zones 1, 2 and 21, 22 with highly efficient LEDs > 3 different light distribution types for adjusting to the illumination task > Enclosure made of sheet steel single powder coated
Linear luminaire with LED Series EXLUX 6002
> latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or pole mounted light fitting > Central locking > All-pole disconnection by means of an N/C switch
EXEL-L. Detail of the internal side. Transparent polycarbonate
EXEL-L - Complete with high efficiency LED tubes - Quick access to the internal electrical equipment - Double locking system operated by hexagonal-head tool - Zone 1, 2, 21, 22 Reinforced polyester resin
Emergency Luminaire with LED Series EXLUX 6009/1 Version IIC
> For use in hazardous areas with gas group IIC > Emergency luminaire for wall, ceiling, pendant or pole installation > Latest LED technology with a high luminous efficacy and a long service life > Central
Linear Luminaire with LED Series EXLUX 6002
> Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or pole mounted light fitting > Central locking > All-pole disconnection by means of an N/C switch
Emergency Luminaire with LED Series EXLUX 6409/1
> Emergency luminaire for wall, ceiling, pendant or pole installation > Latest LED technology with a high luminous efficacy and a long service life > Central locking system > Weekly functional test > Annually
Linear Luminaire with LED Series EXLUX 6402/2
> Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or side entry lamp > Central locking > All-pole disconnection by means of an N/C switch when the
Lighting: Fluorescent Lighting RE Series: Recessed Fluorescent Lighting Fixtures, Standard and Emergency Back-Up Increased Safety
4 x 18 W Surface Mounting 2 x 36 W Recessed Compliance Data: ATEX IECEx: ATEX IECEx CE Ex de IIC or Ex demb IIC (emergency version) T6 to T4 Ex td A21 T 75 C Technical Data: 18 W 36 W 58 W 1, 2, 3 & 4
Fluorescent Lighting FE Series: Nonmetallic Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up Increased Safety
Fluorescent Lighting FE Series: Nonmetallic Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up Increased Safety Zone & & II GD IP66/67 IK0 Applications: Can be installed in hazardous
Linear fittings EVT Weatherproof fluorescent fitting - Industrial applications
DTS LINER FITTINGS - EVT FLUORESENT FITTING - INDUSTRIL PPLITIONS 95 Features Double central locking for ingress protection ll components mounted on hinged and removable gear tray which gives easy access
110/127 V - 220/240 V BI-PIN HEAVY DUTY LUMINAIRES FOR ARMOURED OR NON-ARMOURED CABLE Fluo 2 x 36 W
/27 V - 2/2 V BI-PIN HEAVY DUTY LUMINAIRES FOR ARMOURED OR NON-ARMOURED CABLE 963 39 Fluo 2 x 8 W 963 37 Fluo W 963 36 Fluo 2 x 8 W 8, 36 and 8 W fluorescent luminaires Ø 26 mm bi-pin tubes, standard G3
ATX FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety
Applications Can be installed in hazardous areas designated as Zone 1 and 2 21 and 22. For use in locations where a high degree of corrosion resistance is required. For indoor/outdoor use where protection
Emergency Light Fitting for Fluorescent Lamps Series 6009
> As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W and 36 W > Central locking > All-pole disconnection via N/C switch when opening light fitting or
Compact Sheet-steel Emergency Light Fitting Series 6118/1
www.stahl.de Compact Sheet-steel Emergency Light Fitting > Electronic ballast with integrated emergency light electronics for emergency light mode in case of power failure, charging of battery and automatic
Easy and safe installation
ATX LUMINAIRES 7 Easy and safe installation 1 2 3 Safety Plus : 1- Mounting can be completed with one hand 2- One handed opening using standard tool 3- Reflector swivels easy access 4- Terminal shield
Floodlight LED Series 6525
www.stahl.de > Floodlight Zones 2, 21 and 22 with highly efficient LEDs > 3 different light distribution types for adjusting to the illumination task > Standard enclosure made of sheet steel single powder
Linear Luminaire for Fluorescent Lamps Series EXLUX 6401
> As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp
Floodlight LED Series 6525
www.stahl.de > Floodlight Zones 2, 21 and 22 with highly efficient LEDs > 3 different light distribution types for adjusting to the illumination task > Standard enclosure made of single-coated stainless
FHL. Ex d. Body in aluminium
Ex d FHL Body in aluminium - Zones 1, 2, 21, 22 - Integrated electronic ballast - Power supply 24 V DC - Compact 24/36 W fluorescent tube - Degree of protection IP66 Guard in stainless steel Polycarbonate
ATX FN Series Heavy Duty Nonmetallic Fluorescent Luminaires Standard and Emergency Back-Up. Zone 2-21 and 22
Applications Can be installed in hazardous areas designated as Zone 2, 21 and 22. For use in locations where a high degree of corrosion resistance is required. For indoor/outdoor use where protection against
4.5. Ex Floodlights for high-pressure discharge lamps, series PX 04 and FLT 10. (Zone 1, 2, 21, 22)
.5 Ex Floodlights for high-pressure discharge lamps, series PX 0 and FLT 10 (Zone 1, 2, 21, 22) The powerful floodlights for harsh environments Thanks to the high degree of protection IP66, the robust
Compact Sheet-Steel Light Fittings Series 6114/1
> As 1- or 3-lamp version > Versions Pendant fitting Wall-mounting fitting Flush mounted fitting > Powder-coated steel or stainless steel > Central lock > All pole disconnection via NC switch in positive
Lighting: Incandescent & HID Lighting PB, PC & PL Series: Floodlights Flameproof
Ex de IIB Type PB Ex de IIC Type PC Ex de IIB Type PL Low Temperature Rating Compliances: ATEX - IEC: Zone 1 & 2 21 & 22 ATEX IECEx CE Ex de IIB (PB and PL) T4 to T1 Ex td A21 T130 C to T378 C IP66 (Type
Floodlight Series 6121
www.stahl.de Floodlight > For use in gas group IIC (-20 C... +C) gas group IIB + H 2 (-C... +C) > Material Enclosure in seawater resistant cast aluminium Mounting components in stainless steel > Lamp options
FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety
: : Applications Can be installed in hazardous areas designated as Zone 1, 2, 21 and 22. For use in locations where a high degree of corrosion resistance is required. For indoor/outdoor use where protection
LED Linear Luminaire Series EXLUX 6402
> Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or side entry lamp > Central locking > All-pole disconnection by means of an N/C switch when the
FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety
: : Applications Can be installed in hazardous areas designated as Zone 1 and 2 21 and 22. For use in locations where a high degree of corrosion resistance is required. For indoor/outdoor use where protection
4.6. Ex-Floodlights for high-pressure discharge lamps, series FZD 04 / FZD EN. (Zone 1, 2, 21, 22)
.6 Ex-Floodlights for high-pressure discharge lamps, series FZD 0 / FZD EN (Zone 1, 2, 21, 22) The maintenance- and installation-friendly FZD 0 floodlights for harsh operating conditions Due to the spatial
IIC wellglass luminaires for low energy, halogen and incandescent lamps flameproof
IIC wellglass luminaires for low energy, halogen and incandescent lamps flameproof Zone 1 & 2-21 & 22 ATEX IEC EC II2G/D IK 08 99 EEx d IIC T6-T5-T4-T3 T = 75 C to 135 C IP 66 0947 36 wellglass luminaire
Ex-Floodlight PXLED. (Ex-Zone 1, 2, 21 and 22)
Ex-Floodlight PXLED (Ex-Zone 1, 2, 21 and 22) Lighting under harsh conditions The new modular LED floodlight series PXLED is suited for nearly every kind of lighting task in hazardous areas, including
4.7. Ex-Floodlights for high-pressure discharge lamps, series FZD 04 (Zone 1, 2, 21, 22)
.7 Ex-Floodlights for high-pressure discharge lamps, series FZD 0 (Zone 1, 2, 21, 22) The maintenance- and installation-friendly FZD 0 floodlights for harsh operating conditions Due to the spatial separation
2.4. Ex-Emergency light fittings with a self-contained battery system for fluorescent lamps
.4 Ex-Emergency light fittings with a self-contained battery system for fluorescent lamps ellk 18/18 NE / ellk 36/36 NE / ellm 18/18 NE (Zone 1,, 1, ) If you need a reliable and decentralized emergency
WELLGLASS EV.. Series - H.I.D. well glass lighting fixture. Aluminium with low content of copper. O-ring made of Nitrile Rubber (NBR)
WELLGLASS EV.. Series - H.I.D. well glass lighting fixture EV.. series well glass lighting fixtures are suitable for hazardous areas of industrial plants for lighting of indoor and outdoor structures,
Linear Luminaire for Fluorescent Lamps Series EXLUX 6001
> As wall, ceiling and pendant light fitting or side entry lamp > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened
Linear Luminaire for Fluorescent Lamps Series ECOLUX 6600
> 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners www.stahl.de 10032E00 The light fittings series 6600
1/122 Sales: Malux Finland Oy, P.O.Box 69, FI Porvoo, Phone , Fax ,
1/122 Explosion Protected Safety Luminaire and Escape Sign Luminaires Approved for explosive areas with gas explosion-hazard zones 1 and 21 as well as dust explosion-hazard zones 2 and 22 High IP66 protection
EXENC-L. - Zone 2, Zone Low installation costs - Locking system operated by hexagonal-head tool - High quality electrical components
EXENC-L - Zone 2, Zone 21-22 - Low installation costs - Locking system operated by hexagonal-head tool - High quality electrical components Resin body reinforced polyester Fixing Brackets Transparent hood
Emergency Light Fitting for Fluorescent Lamps Series ECOLUX 6608 Economy
www.stahl.de > For fluorescent lamps 2 x 18 W and 2 x 36 W > Electronic ballast with integrated emergency light electronics > Battery is integrated in the lamp enclosure > For emergency light mode 1.5
2.15. Ex-Linear luminaires for T5 HE fluorescent lamps. nllk W - 35 W (Zone 2 and 22)
.15 Ex-Linear luminaires for T5 HE fluorescent lamps (Zone and ) The energy-saving lighting solution Certified for use in hazardous areas in Zone and, the linear luminaires series nllk 10 for T5 fluorescent
PROTECTA III. Construction Tough glass reinforced polyester body
PROTECTA III 20 Construction Tough glass reinforced polyester body Polycarbonate diffuser with high resistance to UV and stress cracking Robust hinges and multipoint compressive clamping of diffuser closure
Light Fitting for Fluorescent Lamps Series ECOLUX 6600
> 1- or 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners www.stahl.de 10032E00 The light fittings series
EWE. Ex de. Cooling fins
EWE Cooling fins - Suitable for installation with ambient temperature from -50 C to +60 C - Suitable for discharge lamps of up to 150W - Suitable for loop-in/loop-out connections - Zones 1, 2, 21, 22 4
2.2. Ex-Linear LED light fittings. ellk/m 92 LED 400/800 / ellk/m 92 LED 400/800 V-CG-S / NE / NIB-HT / NIB-CSA (Zone 1, 2, 21, 22)
. Ex-Linear LED light fittings ellk/m 9 LED 400/800 / ellk/m 9 LED 400/800 V-CG-S / NE / NIB-HT / NIB-CSA (Zone 1,, 1, ) The efficient solution for your explosion-protected lighting concept The explosion-protected
Power (W) Tamb 40 o C LX1GAM4LB57 5,700 10, T3 T100 o C T4 T85 o C 13
Gamma Floodlight IP66/67 The Gamma is a high output LED floodlight is designed for use in Zone 1 & 21 hazardous areas. The compact design and flexible mounting allows the Gamma to also be used as a lowbay.
2.2. Ex-Linear LED light fittings. ellk/m 92 LED 400/800 / ellk/m 92 LED 400/800 V-CG-S / NE / NE-HT / NIB-HT / NIB-CSA (Zone 1, 2, 21, 22)
. Ex-Linear LED light fittings ellk/m 9 LED 400/800 / ellk/m 9 LED 400/800 V-CG-S / NE / NE-HT / NIB-HT / NIB-CSA (Zone 1,, 1, ) The efficient solution your explosion-protected lighting concept The explosion-protected
Compact Emergency Light Fittings Series C-LUX 6108 / 6508
> Operating modes non-maintained operation non-maintained operation with switchable emergency light blocking > With continous operating test > For fluorescent lamps 8 W, d 16 mm, for two-pin holder G5
ATX PC Series Floodlights Flameproof. Metal Halide, High Pressure Sodium, Mercury Vapor, Halogen
Applications Designed for large area lighting in industrial outdoor and indoor hazardous areas. Ideal for use in Zones 1 and 2 and 21 and 22 in the oil and gas industry. In locations such as: refineries,
Lighting: Fluorescent Lighting FL Series: Light Duty Nonmetallic Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up Zone 2 & 22
FL Series: Light Duty Nonmetallic Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up 2 x 58 W 2 x18 W Compliance Data: ATEX IEC: Zone 2 22 ATEX IEC CE Ex nr II or na II T6 or T5 or T4
AVN. - Zone 2, 21, 22 - Lower maintenance costs - Easy to install - Suited to ambient temperatures of up to +55 C. Ex n. Stainless steel clips
AVN - Zone 2, 21, 22 - Lower maintenance costs - Easy to install - Suited to ambient temperatures of up to +55 C Transparent polycarbonate diffuser Stainless steel clips Polyamide cable gland and plug
RLFE. Mounting bracket. Ex de. - Fast, easy installation - Suitable for discharge lamps of up to 400W - Robust and safe over time - Zones 1, 2, 21, 22
Ex de RLFE Mounting bracket - Fast, easy installation - Suitable for discharge lamps of up to 400W - Robust and safe over time - Zones 1, 2, 21, 22 Stainless steel guard Ex e terminal housing B.1 ED.2018
7 Lighting Technology
7 Lighting Technology Compact Emergency Light Fittings C-LUX 6108 (Zones 1 & 2, 21 & 22) C-LUX 6508 (Zones 2, 22) 01908E00 Series C-LUX 6108 and 6508 compact emergency lighting fitting can be used for
EX-D ENCLOSURES AND DISTRIBUTIONS
EX-D ENCLOSURES AND DISTRIBUTIONS Series GHG made of metal for gases of explosion group IIC To use MCBs, fuses, contactors etc. which give off arcs in potentially hazardous areas, they must be integrated
EWE. Cooling fins. Ex de
EWE Cooling fins - Suitable for installation with ambient temperature from -50 C to +60 C - Suitable for discharge lamps of up to 150W - Suitable for loop-in/loop-out connections - Zones 1, 2, 21, 22 4
Emergency Light Fitting for Fluorescent Lamps Series EXLUX 6008 / 6408
> As pendant light fitting or side entry lamp > Version with 2 lamps: 18 W and 36 W > Central locking > Weekly functional test > Light duration test of the emergency lighting once a year www.stahl.de 10068E00
FL Series Light Duty Nonmetallic Fluorescent Luminaires Standard and Emergency Back-Up. Zone 2 and 22
Standard and Emergency Back-Up. Applications Light duty luminaire ideal for commercial and light industrial locations including hazardous areas designated as Zone 2 or 22 environments. Typical applications
Zone 1 and Zone 2. Lighting Technology. Compact Emergency Light Fittings Series C-LUX 6108
Lighting Technology Compact Emergency Light Fittings Can be used in Zone 1 and Zone 2 With electronic ballast and integratal emergency light unit For continuous emergency operation 1 h or 1.5 h Operating
L: pole type. X: ceiling type. Lamp number Lamp wattage(w) Explosion-proof light fittings for fluorescent lamp BAY51-18 x 1L
Lighting Technology BAY- x Series Explosion-proof Light Fittings for Fluorescent Lamp Explosion protection to -CENELEC -IEC Can be used in Zone and Zone One or two lamp version; Available lamp wattage:
Tubular Light Fitting with LED Series 6036
> Extremely robust luminaire design for rough ambient conditions > Very lightweight and vibration resistant LED light fitting > Extremely long service life due to high power LEDs used including driver
Light Fitting for Fluorescent Lamps Series ECOLUX 6600
> 1- or 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners www.stahl.de 10032E00 The light fittings series
Emergency Light Fittings for Fluorescent Lamps Series ECOLUX 6608
> For fluorescent lamps 2 x 18 W and 2 x 36 W > For emergency light operation periods of 1.5 or 3 hrs > During emergency time: If emergency lamp broken changing to the other lamp > Battery case which can
J: Emergency lighting (optional) L: pole type X: ceiling type Mounting
Lighting Technology Light Fittings for Fluorescent Lamp BAY1-Q Series Explosion-proof Light Fittings for Fluorescent Lamp Explosion protection to -CENELEC -IEC -NEC Can be used in Zone 1 and Zone Zone
ALUMINIUM AND STAINLESS STEEL ENCLOSURES - EJB... SERIES
Ex d IIB+H 2 ALUMINIUM AND STAINLESS STEEL ENCLOSURES - EJB... SERIES ALUMINIUM ENCLOSURES STAINLESS STEEL ENCLOSURES EJB... series enclosures offer Ex d IIB +H 2 mode of protection. These enclosures are
Linear fluorescent luminaire LED V-CG-S
(2 x 3 W) Linear fluorescent luminaire LED V-CG-S Completely monitored explosion-protected LED light Await live of the LED module from 75.000 hours Different luminous colours available 4000 K / 5600 K
7 Lighting Technology
7 Lighting Technology Light Fittings for Fluorescent Lamps Series EXLUX 6400 (Zones 2, 21 & 22) As pendant or pole-mounting fittings With electronic ballast For two-pin fluorescent lamps 1 or 2 lamp versions:
Compact Emergency Light Fittings Series C-LUX 6108 / 6508
> Operating modes non-maintained operation non-maintained operation with switchable emergency light blocking > With continous operating test > For fluorescent lamps 8 W, d 16 mm, for two-pin holder G5
GRD Electronic earthing system. Ex d. Polyester coating RAL7035. LED indicators
Ex d GRD-4200 Electronic earthing system - Zone 1, 2, 21, 22 - High quality electronic components - High resistance to corrosion and extreme weather - Safe and reliable over time SIL certified Level 2
Light Fittings for Fluorescent Lamps Series EXLUX 6000 / 6400
> As pendant light fitting or side entry lamp > Version with 1 or 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened > End of life
EX-RECESSED CEILING LIGHT FITTINGS
EX-RECESSED CEILING LIGHT FITTINGS ellb 20... 1-5 W Metallic design for Zone 1 and 21 The ellb 20 explosion-protected ceiling light fitting with electronic ballast meet the requirements of ATEX-Directive
Sheet-Steel Light Fittings Series 6014 / 6414
> As 1-, 2-, 3- or 4-lamp version > Versions pendant light fittngs wall-mounting s recessed s > Powder-coated sheet-steel or stainless steel > Central lock > All-pole disconnection via NC switch in positive
Zone 1 and Zone 2. Lighting Technology. Emergency Light Fittings Series EXLUX 6008
Lighting Technology Emergency Light Fittings Can be used in Zone 1 and Zone 2 As pendant or pole-mounting fittings For single- and two-pin fluorescent lamps With electronic ballast and integral emergency
Compact Sheet-Steel Light Fittings Series 6114
> As 1-, 2- oder 3-lamp version > Versions Pendant fitting Wall-mounting fitting Flush mounted fitting > Powder-coated steel or stainless steel > Central lock > All pole disconnection via NC switch in
Floodlight Series 6521/4
> The enclosure made of stainless steel V4A, V2A or powder coated sheet steel is available > Broad or narrow beam reflectors and/or asymmetrical lamp fitting > Series 6521/3 explosion protected floodlight
CEAG Products Main Catalogue Part 1 Chapter 3. Emergency and safety light fittings. EATON 1.3.1
CEAG Products Main Catalogue Part 1 Chapter Emergency and safety light fittings www.crouse-hinds.de EATON 1..1 .1..2.1..2 EATON'S CROUSE-HINDS BUSINESS EATON Ex-Signal- and Rettungszeichenleuchten www.crouse-hinds.de
EJB Enclosures. ATEX II 2 G Ex d IIB+H2 T6...T3 - II 2 D Ex td A21 T85 C C IECEx Ex d IIB+H2 T6...T3 - Ex td A21 T85 C...
EJB Enclosures ATEX and IECEx Zone 1 certified Explosion proof Marine grade copper-free aluminium IP66 The EJB Series is a range of explosion-proof enclosures, available in either aluminium alloy (EJB)
Terminal Boxes Series 8125
Series > Wide product range > Enclosure of electropolished stainless steel.0 (AISI L) or galvanised steel sheet painted > basic enclosure sizes various heights > Fitted according to the customer's requirements
Local Control Station
Local Control Station As per table given below Ex'd', IIC, IP-66, FLP/WP Local Control Station and Switch MFPB/302/IIC-IEC MFPB/302/IIC-IEC MFPB/302/IIC-IEC MFRS/104/I/IIC-IEC MFRS/104/IIC-IEC A B C D
7 Lighting Technology
7 Lighting Technology Emergency Light Fittings for Fluorescent Lamps Series ECOLUX 6608 The single-battery-supplied emergency lamps of the ECOLUX 6608 lighting series are employable as safety lighting
The cover screws and all other external metal parts are made of stainless steel (AISI 316L). International approvals
E X - J U N C T I O N B O X Plastic version for Zone 1,, 1 and The robust junction boxes made of plastic and light alloy are featured by their simple mounting and installation capability and their design.
TUNNEL54. Safety and fire resistance VENTILATION LIGHTING
TUNNEL54 Safety and fire resistance VENTILATION LIGHTING 238 TUNNEL54 Safety and fire resistance VENTILATION TUNNEL54 fire resistant sockets for ventilators Page 240 LIGHTING TUNNEL54 junction boxes with
Terminal Boxes Series 8125
Series > Wide product range > Enclosure of electropolished stainless steel.0 (AISI L) or galvanised steel sheet > basic enclosure sizes various heights > Fitted according to the customer's requirements
defender-s NJZ-FEL-B Series Hazardous Locations&Explosive Atmospheres Zone1&2, Zone21&22 II 2G Ex d IIB T5 Gb II2D Ex tb IIIC 95 Max Db IP 66
defender-s NJZ-FEL-B Series Hazardous Locations&Explosive Atmospheres Zone1&2, Zone21&22 II 2G Ex d IIB T5 Gb II2D Ex tb IIIC 95 Max Db IP 66 features Defender-S explosion-proof light uses simple profile,
Sheet Steel Emergency Light Fitting Series 6018
> For an operating duration of 1.5 or 3 h > Operating modes Continuous operation Continuous operation with switchable emergency light blocking > Weekly functional test > Total discharge protection and
PY, SPY; FSQC, FP; EPC; AP
Ex d PY, SPY; FSQC, FP; EPC; AP Sockets and plugs Aluminium alloy with low copper - Group IIC content - Zone 1, 2, 21, 22 - Aluminium alloy - Ergonomic - Plugs can be used with industrial sockets Polyester
Areamaster LED Flood/High Bay Luminaires For Hazardous Locations. 250 W, 400 W, 750 W, 1000 W HID Light Level Equivalent
Class I, Division 2, Groups A, B, C, D Class I, Zone 2 Group IIC Class II, Division 1, Groups E, F, G Class II Division 2, Groups F, G Class III Simultaneous Exposure Type 3R, 4, 4X IP66/67 Applications
explosive environments Lighting
explosive environments Lighting CLASSIFICATION OF THE ZONES GAS AND VAPOURS DUST PRESENCE OF EXPLOSIVE ATMOSPHERE ZONE 0 ZONE 20 Category 1G Category 1D Permanent ZONE 1 ZONE 21 Category 2G Category 2D
EVE. Silicon gasket. Ex de
EVE - Optimal performance at high (+ C) and low (- C) temperatures - Easy to install, low maintenance costs - Zone 1, 2, 21, 22 Silicon gasket 4 Joule shock resistant borosilicate glass globe Stainless