Linear fittings EVTL Weatherproof LED fitting - Industrial applications
|
|
|
- Dennis Day
- 5 years ago
- Views:
Transcription
1 89 Linear fittings LED Features Operating life up to h High lumen output lumens with 100% yield - LED module with diffuser Double central locking for ingress protection All components mounted on hinged and removable gear tray which gives easy access for maintenance Including accessories (cable gland, plugs & fixing brackets) EVTL LED fitting Approvals & certifications IP 66 IK 10 Specifications Main body constructed of glass-reinforced polyester for high impact strength UV protected polycarbonate diffuser to resist harsh environments Rated voltage 100-4Vac 50-60Hz Wiring configuration: 5 wires 3x entries M20 Photobiological safety EMC Directive (2014/30/EU) Low voltage Directive (2014/35/EU) Standards IEC62471 Exempt group EN 55015: Conducted emission test and radiated emission test EN 61547: CEM immunity EN : Harmonic current Emissions Class C EN : Limitation of voltage changes and flickers EN : Luminaire general requirements and tests, including dielectric strength and isolation resistance Glow wire test: 960oC Operating temperature: -20 C to +55 C IP test: IEC 60529: IP66 Impact protection index: IEC 62262: IK10 01 Hinged & removable gear tray 01
2 90 ABB DTS LIGHT FITTINGS, BOXES & CUSTOM BUILT CONTROL PANELS FOR EXPLOSIVE ATMOSPHERES Linear fittings EVTL Linear LED fitting 5 wires Glass Diffuser Industrial applications Dimensions 2 x M8 hole 20mm depth 2 trous M8 prof. 20mm 2xM8 holes 20mm depth C B C B EVTL 5 wires: Equipped with 1 cable gland & 2 plugs A A 137 mm mm Type For Operating life Dimensions mm Wiring Light Current A Lumen Efficiency Weight non armored cable armored cable Configuration Rating 230V Output lm at C at 55 C Lm/W A B C kg EVTL EVTL120-D000 5 wires* EVTL EVTL140-D000 5 wires* EVTL EVTL165-D000 5 wires* EVTL EVTL220-D000 5 wires* EVTL EVTL240-D000 5 wires* EVTL EVTL265-D000 5 wires* EVTL 5 wires through: Equipped with 2 cable glands & 1 plug EVTL120-B000 EVTL120-E000 5 wires** EVTL140-B000 EVTL140-E000 5 wires** EVTL165-B000 EVTL165-E000 5 wires** EVTL220-B000 EVTL220-E000 5 wires** EVTL240-B000 EVTL240-E000 5 wires** EVTL265-B000 EVTL265-E000 5 wires** Note. * For armored cable with 1 continuity plate. ** For armored cable with 2 continuity plates. Technical information LED installed Set of LED modules with integrated diffuser Colour temperature 4000 K L70/B10 at C (70% lumen output/ 90% active LED) according to operating life Photometric curve See page 182 Rated voltages Electronic driver: 100-4Vac 50/60Hz Power factor 0.9 CRI 84 Wiring Configuration Electrical protection class Inrush current 5 wires for the part EVTL240 I peak = delta t = 275µs Max. light fittings per circuit breaker Type 10A 16A 20A A B C I Technical information Grounding system Terminal block (screws plug in terminal block) Cable entries For non-armoured cable: For armoured cable: Housing Fixing (included with product) TNS, TNC, TT, IT neutral system 2.5mm² rigid or flexible Terminals supplied L1, L2, L3, N, PE (looping possible with one additional cable gland) Three entries M20 Included two M20 nylon plugs (EX-M20) and one M20 nylon cable gland, diameter 6-12mm (EXCGM20S) and three nylon locknuts included continuity plate - two M20 nylon plugs (EX-M20) and one M20 nickel plated brass cable gland, diameter 6-12/ mm (EXN04MMC1K) Glass reinforced polyester housing for high impact strength, UV protected polycarbonate diffuser to resist harsh environments, White painted steel gear tray & 2x M8 Stainless steel 316L insert V015-2x Two zinc-plated steel brackets for ceiling mounting
3 91 Fluorescent fitting to a LED fitting 01 ht source : 2 x L36W/840 OSRAM Lumilux Coolwhite 20mx20m ht 5m 01 T8 fluorescent lamp 3d photometric data 02 LED module 3d photometric data 03 Remove existing fluorescent gear tray What are the LED benefits? The benefits of the LED technology consist in a significant improvement in the life expectancy of your product, lower power consumption and the improvement of the photometric features. 02 2,50 5 7, lx Light source : 1 x LED 04 Replace with LED gear tray with driver 05 Connect LED gear tray to power supply T8 fluorescent lamp - EVT J0 3D view Lumen output (light fitting): 4493 lm Lumen output (lamp): 5878 lm Yield: 76.4% Rating per light fitting: 63.5W Light source: 2x L36W/840 OSRAM Lumilux Cool White (corrector factor 1.00) LED module - EVTL D view Lumen output (light fitting): 4421 lm Lumen output (lamp): 4511 lm Yield: 98% Rating per light fitting: 56.8W Light source: 1x LED module (corrector factor 1.00) MRO benefits How can I upgrade my current light fitting? Tubular fittings could be switched from fluorescent to LED technology by easy sliding gear tray without any specific tool. The fixture with 1 or 2 fluorescent tubes T8 could be replaced by only one LED module fixed on the new gear tray. 2,50 5 7, lx 20mx20m ht 5m Gear trays parts to upgrade from a fluorescent to a LED fitting - LED gear tray with driver Vac 50/60Hz: V0041X20WEL - To upgrade EVT120 to EVTL120 V0041X40WEL - To upgrade EVT140 to EVTL140 V0041X65WEL - To upgrade EVT165 to EVTL165 V0042X20WEL - To upgrade EVT220 to EVTL220 V0042X40WEL - To upgrade EVT240 to EVTL240 V0042X65WEL - To upgrade EVT265 to EVTL
4 92 ABB DTS LIGHT FITTINGS, BOXES & CUSTOM BUILT CONTROL PANELS FOR EXPLOSIVE ATMOSPHERES Linear fittings - accessories Fixing accessories* Brackets Type Specifications V015 2 x pair of zinc plated steel for ceiling mounting (Included with product) ø9 V016 Stainless steel 316L brackets for ceiling mounting Hook Type Specifications 20 V024 2x Zinc plated steel suspension hook M Mounting bracket clip Type Specifications V014 2x Rapid ceiling mounting with stainless steel clip 60, 2 Ø 8.5 Fixing bracket and flange Type Specifications V018 2x zinc plated steel pole mounted brackets for ø1 ¼ & 1 ½ 100 M8 V019 2x zinc plated steel pole mounted brackets for ø2 V021 2x Stainless steel 316L pole mounted brackets for ø1 ¼ & 1 ½ V022 2x Stainless steel 316L pole mounted brackets ø2 α ø9 ~70 41 * Screws and locknuts supplied
5 93 Linear fittings - spare parts Spare parts Type Specifications V001 V004 V00120W V00140W V00165W V0041X20WEL V0041X40WEL V0041X65WEL V0042X20WEL V0042X40WEL V0042X65WEL 20W diffuser with gasket for EV. range 40W diffuser with gasket for EV. range 65W diffuser with gasket for EV. range Gear tray 12W with driver 100-4Vac 50-60Hz and bracket kit of gear tray for EVTL120 Gear tray W with driver 100-4Vac 50-60Hz and bracket kit of gear tray for EVTL140 Gear tray 31W with driver 100-4Vac 50-60Hz and bracket kit of gear tray for EVTL165 Gear tray 19W with driver 100-4Vac 50-60Hz and bracket kit of gear tray for EVTL220 Gear tray 56W with driver 100-4Vac 50-60Hz and bracket kit of gear tray for EVTL240 Gear tray 71W with driver 100-4Vac 50-60Hz and bracket kit of gear tray for EVTL265 V020x40W Brass continuity plate for EV. 120, EV. 220, EV. 140, EV. 240 V065W Brass continuity plate for EV. 165, EV. 265 EXCGM20S EXN04MMC1K M20 Exe IIC nylon cable gland for non armoured cable diameter 6-12mm, locknut available separately as LNPB/M20 Kit M20 Ex-d IIC Ex-e II Ex-td double compression nickel plated cable gland for armoured cable diameter inner 6-12 outer mm locknut, sealing gasket
Linear fittings EVTL Weatherproof LED fitting - Industrial applications
89 Linear fittings LED Features Operating life up to 100 000 h High lumen output - 5 000 lumens with 100% yield - LED module with diffuser Double central locking for ingress protection All components mounted
Linear fittings EVDL LED fitting - zones 21, & 22
ABB DTS LINEAR FITTINGS - EVDL LED FITTING - ZONES 21 & 22 77 Linear fittings EVDL LED fitting - zones 21, & 22 LED Features Operating life up to 100 000 h High lumen output - 5 000 lumens with 100% yield
Linear fittings EVNL LED fitting - zones 2, & 22
65 Linear fittings EVNL LED fitting - zones 2, & 22 LED Features Operating life up to 100 000 h High lumen output - 5 000 lumens with 100% yield - LED module with diffuser Double central locking for ingress
Linear fittings EVS fluorescent fitting with easy disconnect - zones 1, 2, 21 & 22
ABB DTS LINEAR FITTINGS - EVS FLUORESCENT FITTING - S, 2, 2 & 22 59 EVS fluorescent fitting with easy disconnect - zones, 2, 2 & 22 Features Easy disconnect without wiring to remove the gear tray All components
Linear fittings EVT Weatherproof fluorescent fitting - Industrial applications
LIEAR FITTIGS - EVT FLUORESCET FITTIG - IDUSTRIAL APPLICATIOS 95 Features Double central locking for ingress protection All components mounted on hinged and removable gear tray which gives easy access
Linear fittings EVN Fluorescent fitting - zones 2 & 22
LIEAR FITTIGS - EV FLUORESCET FITTIG - ZOES 2 & 22 71 EV Fluorescent fitting - zones 2 & 22 Features Double central locking for ingress protection All components mounted on hinged and removable gear tray
Linear fittings EVT Weatherproof fluorescent fitting - Industrial applications
DTS LINER FITTINGS - EVT FLUORESENT FITTING - INDUSTRIL PPLITIONS 95 Features Double central locking for ingress protection ll components mounted on hinged and removable gear tray which gives easy access
Linear fittings Fluorescent fitting EVN - Zones 2 & 22
Fluorescent fitting Features Double central locking for ingress protection All components mounted on hinged and removable gear tray which gives easy access for maintenance Including accessories (cable
Linear fittings EVD Fluorescent fitting - zones 21 & 22
DTS LIER FITTIGS - EVD FLUORESET FITTIG - ZOES 21 & 22 83 EVD Fluorescent fitting - zones 21 & 22 Features Double central locking for ingress protection ll components mounted on hinged and removable gear
Tubular fittings Tubular fluorescent fitting with automatic switch off XFP - Zones 1, 2 & 21, 22
Tubular fluorescent fitting with automatic switch off Features Quick and easy insulation switch for safe maintenance Ex e integral junction box All components mounted on sliding gear tray for easy installation
Tubular fittings Tubular fluorescent fitting XFF - Zones 1, 2 & 21, 22
Tubular fluorescent fitting XFF - Zones 1, & 1, Features All components mounted on sliding gear tray for easy installation and maintenance Standard components used inside body allowing reduced maintenance
Linear Luminaire with LED Series EXLUX 6002/2 Version IIC
> For use in hazardous areas with gas group IIC > Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or pole mounted light fitting > Central locking
Start Waterproof LED G3 fixed output START WATERPROOF LED G3 1500MM T 4K
Product features Start Waterproof, integrated LED weatherproof luminaire, with UV stabilized flat diffuser and linear prisms designed to achieve uniform lit appearance, optimise light output and to reduce
Wellglass fittings EVH, EVX Wellglass fitting all zones - zones 1, 2, 21 & 22
WELLGLASS - EVH, EVX WELLGLASS FITTING - S 1, 2, 21 & 22 127 Wellglass fittings Features Compact design for easy installation For diffuse or ambient light Compatible with energy saving lamps or discharge
110/127 V - 220/240 V BI-PIN HEAVY DUTY LUMINAIRES FOR ARMOURED OR NON-ARMOURED CABLE Fluo 2 x 36 W
/27 V - 2/2 V BI-PIN HEAVY DUTY LUMINAIRES FOR ARMOURED OR NON-ARMOURED CABLE 963 39 Fluo 2 x 8 W 963 37 Fluo W 963 36 Fluo 2 x 8 W 8, 36 and 8 W fluorescent luminaires Ø 26 mm bi-pin tubes, standard G3
EXEL-L. Detail of the internal side. Transparent polycarbonate
EXEL-L - Complete with high efficiency LED tubes - Quick access to the internal electrical equipment - Double locking system operated by hexagonal-head tool - Zone 1, 2, 21, 22 Reinforced polyester resin
Emergency Luminaire with LED Series EXLUX 6009/1 Version IIC
> For use in hazardous areas with gas group IIC > Emergency luminaire for wall, ceiling, pendant or pole installation > Latest LED technology with a high luminous efficacy and a long service life > Central
Emergency Luminaire with LED Series EXLUX 6409/1
> Emergency luminaire for wall, ceiling, pendant or pole installation > Latest LED technology with a high luminous efficacy and a long service life > Central locking system > Weekly functional test > Annually
Linear Luminaire with LED Series EXLUX 6402/2
> Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or side entry lamp > Central locking > All-pole disconnection by means of an N/C switch when the
Lighting: Fluorescent Lighting RE Series: Recessed Fluorescent Lighting Fixtures, Standard and Emergency Back-Up Increased Safety
4 x 18 W Surface Mounting 2 x 36 W Recessed Compliance Data: ATEX IECEx: ATEX IECEx CE Ex de IIC or Ex demb IIC (emergency version) T6 to T4 Ex td A21 T 75 C Technical Data: 18 W 36 W 58 W 1, 2, 3 & 4
Easy and safe installation
ATX LUMINAIRES 7 Easy and safe installation 1 2 3 Safety Plus : 1- Mounting can be completed with one hand 2- One handed opening using standard tool 3- Reflector swivels easy access 4- Terminal shield
LED Linear Luminaire Series EXLUX 6402
> Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or side entry lamp > Central locking > All-pole disconnection by means of an N/C switch when the
Floodlight fittings HPS, MH or Halogen Floodlight fitting XSF, XQF, XEF - Zones 1, 2
Features Wide or narrow beam Ex e integral junction box Flat or pole mounting Supplied with lamp installed Including accessories (cable gland & plug) Supplied with offshore grade paint Manufactured from
Linear Luminaire with LED Series EXLUX 6002
> Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or pole mounted light fitting > Central locking > All-pole disconnection by means of an N/C switch
Linear luminaire with LED Series EXLUX 6002
> latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or pole mounted light fitting > Central locking > All-pole disconnection by means of an N/C switch
SPECIFICATION SHEET ORION ROAD LANTERN. IP66 RATED CRI. 230v /50hz
ORION ROAD LANTERN Arc shape cooling guide design, resulting in effective heat dissipation and dust removal ability Combined optical lens, ideal for road lighting requirements Power-off protection socket,
Floodlight LED Series 6125
www.stahl.de > Floodlight Zones 1, 2 and 21, 22 with highly efficient LEDs > 3 different light distribution types for adjusting to the illumination task > Enclosure made of sheet steel single powder coated
Fluorescent Lighting FE Series: Nonmetallic Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up Increased Safety
Fluorescent Lighting FE Series: Nonmetallic Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up Increased Safety Zone & & II GD IP66/67 IK0 Applications: Can be installed in hazardous
Floodlight LED Series 6525
www.stahl.de > Floodlight Zones 2, 21 and 22 with highly efficient LEDs > 3 different light distribution types for adjusting to the illumination task > Standard enclosure made of sheet steel single powder
Linear Luminaire for Fluorescent Lamps Series ECOLUX METAL 6010/1
> For use in Zones 1, 2, 21, 22 and safe area > 2-lamp version: 18 W 36 W > Housing made of sheet steel or stainless steel SS304 / > Quick fasteners www.stahl.de 15709E00 The light fittings of Series ECOLUX
Floodlight LED Series 6525
www.stahl.de > Floodlight Zones 2, 21 and 22 with highly efficient LEDs > 3 different light distribution types for adjusting to the illumination task > Standard enclosure made of single-coated stainless
Lighting: Fluorescent Lighting FL Series: Light Duty Nonmetallic Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up Zone 2 & 22
FL Series: Light Duty Nonmetallic Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up 2 x 58 W 2 x18 W Compliance Data: ATEX IEC: Zone 2 22 ATEX IEC CE Ex nr II or na II T6 or T5 or T4
TUNNEL54. Safety and fire resistance VENTILATION LIGHTING
TUNNEL54 Safety and fire resistance VENTILATION LIGHTING 238 TUNNEL54 Safety and fire resistance VENTILATION TUNNEL54 fire resistant sockets for ventilators Page 240 LIGHTING TUNNEL54 junction boxes with
FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety
: : Applications Can be installed in hazardous areas designated as Zone 1, 2, 21 and 22. For use in locations where a high degree of corrosion resistance is required. For indoor/outdoor use where protection
Compact Sheet-Steel Light Fittings Series 6114/1
> As 1- or 3-lamp version > Versions Pendant fitting Wall-mounting fitting Flush mounted fitting > Powder-coated steel or stainless steel > Central lock > All pole disconnection via NC switch in positive
Linear Luminaire for Fluorescent Lamps Series EXLUX 6401
> As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp
ATX FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety
Applications Can be installed in hazardous areas designated as Zone 1 and 2 21 and 22. For use in locations where a high degree of corrosion resistance is required. For indoor/outdoor use where protection
Compact Sheet-steel Emergency Light Fitting Series 6118/1
www.stahl.de Compact Sheet-steel Emergency Light Fitting > Electronic ballast with integrated emergency light electronics for emergency light mode in case of power failure, charging of battery and automatic
ATX FN Series Heavy Duty Nonmetallic Fluorescent Luminaires Standard and Emergency Back-Up. Zone 2-21 and 22
Applications Can be installed in hazardous areas designated as Zone 2, 21 and 22. For use in locations where a high degree of corrosion resistance is required. For indoor/outdoor use where protection against
FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety
: : Applications Can be installed in hazardous areas designated as Zone 1 and 2 21 and 22. For use in locations where a high degree of corrosion resistance is required. For indoor/outdoor use where protection
1/122 Sales: Malux Finland Oy, P.O.Box 69, FI Porvoo, Phone , Fax ,
1/122 Explosion Protected Safety Luminaire and Escape Sign Luminaires Approved for explosive areas with gas explosion-hazard zones 1 and 21 as well as dust explosion-hazard zones 2 and 22 High IP66 protection
IIC wellglass luminaires for low energy, halogen and incandescent lamps flameproof
IIC wellglass luminaires for low energy, halogen and incandescent lamps flameproof Zone 1 & 2-21 & 22 ATEX IEC EC II2G/D IK 08 99 EEx d IIC T6-T5-T4-T3 T = 75 C to 135 C IP 66 0947 36 wellglass luminaire
2.15. Ex-Linear luminaires for T5 HE fluorescent lamps. nllk W - 35 W (Zone 2 and 22)
.15 Ex-Linear luminaires for T5 HE fluorescent lamps (Zone and ) The energy-saving lighting solution Certified for use in hazardous areas in Zone and, the linear luminaires series nllk 10 for T5 fluorescent
AVN. - Zone 2, 21, 22 - Lower maintenance costs - Easy to install - Suited to ambient temperatures of up to +55 C. Ex n. Stainless steel clips
AVN - Zone 2, 21, 22 - Lower maintenance costs - Easy to install - Suited to ambient temperatures of up to +55 C Transparent polycarbonate diffuser Stainless steel clips Polyamide cable gland and plug
PROTECTA III. Construction Tough glass reinforced polyester body
PROTECTA III 20 Construction Tough glass reinforced polyester body Polycarbonate diffuser with high resistance to UV and stress cracking Robust hinges and multipoint compressive clamping of diffuser closure
TECHNICAL DATASHEET. Weatherproof LED luminaire DUNA FLEX High Efficiency. 70,000 h product life IK C. Applications recommendation
70,000 h product life Frequency 0 50/60Hz 650 C IK 03 Rated voltage 220 240V +35 C -25 C DHE 1.2 41-840 ET SMC DPM IX CG General characteristics Applications recommendation LED module luminaire manufactured
FL Series Light Duty Nonmetallic Fluorescent Luminaires Standard and Emergency Back-Up. Zone 2 and 22
Standard and Emergency Back-Up. Applications Light duty luminaire ideal for commercial and light industrial locations including hazardous areas designated as Zone 2 or 22 environments. Typical applications
Start Waterproof LED START WATERPROOF LED 1265MM TWIN 4000K PRODUCT OVERVIEW
Range Features Range of Weatherproof LED luminaires. Available in 3 lengths: 662mm, 1,265mm & 1,565mm single with single or twin lamp options. Choose from Neutral White 4000K or Cool White 6500K. High
TECHNICAL DATASHEET. Weatherproof LED luminaire DUNA FLEX Standard Plus. 50,000 h product life IK C. Applications recommendation
TECHNICAL DATASHEET IK 08 Frequency 0 50/60Hz Rated voltage 220 240V 850 C 50,000 h product life +35 C -25 C DSTP 1.2 40-840 ET PC DPC PA General characteristics Applications recommendation LED module
Lighting: Incandescent & HID Lighting PB, PC & PL Series: Floodlights Flameproof
Ex de IIB Type PB Ex de IIC Type PC Ex de IIB Type PL Low Temperature Rating Compliances: ATEX - IEC: Zone 1 & 2 21 & 22 ATEX IECEx CE Ex de IIB (PB and PL) T4 to T1 Ex td A21 T130 C to T378 C IP66 (Type
Linear Luminaire for Fluorescent Lamps Series ECOLUX 6600
> 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners www.stahl.de 10032E00 The light fittings series 6600
Emergency Light Fitting for Fluorescent Lamps Series 6009
> As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W and 36 W > Central locking > All-pole disconnection via N/C switch when opening light fitting or
TECHNICAL DATA CRI. 230v /50hz. EFFICACY WATTAGE Llm/W. EFFICACY WATTAGE Llm/W
TECHNICAL DATA CLIMATE SINGLE SINGLE ARRAY TWIN ARRAY Complete with array, ideal replacement for linear fluorescent Designed for surface mount application in industrial and commercial environments Polycarbonate
7 Lighting Technology
7 Lighting Technology Light Fittings for Fluorescent Lamps Series EXLUX 6400 (Zones 2, 21 & 22) As pendant or pole-mounting fittings With electronic ballast For two-pin fluorescent lamps 1 or 2 lamp versions:
Power (W) Tamb 40 o C LX1GAM4LB57 5,700 10, T3 T100 o C T4 T85 o C 13
Gamma Floodlight IP66/67 The Gamma is a high output LED floodlight is designed for use in Zone 1 & 21 hazardous areas. The compact design and flexible mounting allows the Gamma to also be used as a lowbay.
SPECIFICATION SHEET CONTOUR SUSPENDED LINEAR SYSTEM. IP40 RATED IRC. 600mm. 1200mm. 1500mm. 1800mm
CONTOUR SUSPENDED Ideal linear fluorescent replacement Continuous light system with connectable modules offered in 600mm, 1200mm, 1500mm & 1800mm Premium aluminium extrusion with high quality polycarbonate
Linear Luminaire for Fluorescent Lamps Series EXLUX 6001
> As wall, ceiling and pendant light fitting or side entry lamp > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened
2.2. Ex-Linear LED light fittings. ellk/m 92 LED 400/800 / ellk/m 92 LED 400/800 V-CG-S / NE / NIB-HT / NIB-CSA (Zone 1, 2, 21, 22)
. Ex-Linear LED light fittings ellk/m 9 LED 400/800 / ellk/m 9 LED 400/800 V-CG-S / NE / NIB-HT / NIB-CSA (Zone 1,, 1, ) The efficient solution for your explosion-protected lighting concept The explosion-protected
Light Fitting for Fluorescent Lamps Series ECOLUX 6600
> 1- or 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners www.stahl.de 10032E00 The light fittings series
EXENC-L. - Zone 2, Zone Low installation costs - Locking system operated by hexagonal-head tool - High quality electrical components
EXENC-L - Zone 2, Zone 21-22 - Low installation costs - Locking system operated by hexagonal-head tool - High quality electrical components Resin body reinforced polyester Fixing Brackets Transparent hood
Emergency Light Fitting for Fluorescent Lamps Series ECOLUX 6608 Economy
www.stahl.de > For fluorescent lamps 2 x 18 W and 2 x 36 W > Electronic ballast with integrated emergency light electronics > Battery is integrated in the lamp enclosure > For emergency light mode 1.5
CATALOGUE.
CATALOGUE www.dgr.com.my D TUBE LED D TL2 LED TUBE LED TUBE LIGHTING SERIES FAMILY NAME: LEMNIS TL2 1200 CORRELATED COLOUR TEMPERATURE: 3500K / 4000K / 5000K / 6500K PRODUCT CODE: 2R3MEB / 2R4MEB / 2R2MEB
Light Fitting for Fluorescent Lamps Series ECOLUX 6600
> 1- or 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners www.stahl.de 10032E00 The light fittings series
Datasheet. OSRAM SubstiTUBE Trio 2
www.osram.com OSRAM SubstiTUBE Trio 2 Datasheet Innovative LED-lamp, easy and safe to use in CCG installations as direct retrofit. Energy saving potential of up to 60% by replacing T8 fluorescent tubes.
EX-REPAIR AND MAINTENANCE RECEPTACLES
EX-REPAIR AND MAINTENANCE RECEPTACLES A 3 A plugs and receptacles plastic version for zones, 2, 2 and 22 For maintenance, repair and upgrading work, appliances such as drills, welding transformers, hand
Ex-Floodlight PXLED. (Ex-Zone 1, 2, 21 and 22)
Ex-Floodlight PXLED (Ex-Zone 1, 2, 21 and 22) Lighting under harsh conditions The new modular LED floodlight series PXLED is suited for nearly every kind of lighting task in hazardous areas, including
Compact Sheet-Steel Light Fittings Series 6114
> As 1-, 2- oder 3-lamp version > Versions Pendant fitting Wall-mounting fitting Flush mounted fitting > Powder-coated steel or stainless steel > Central lock > All pole disconnection via NC switch in
ATX PC Series Floodlights Flameproof. Metal Halide, High Pressure Sodium, Mercury Vapor, Halogen
Applications Designed for large area lighting in industrial outdoor and indoor hazardous areas. Ideal for use in Zones 1 and 2 and 21 and 22 in the oil and gas industry. In locations such as: refineries,
Linear fluorescent luminaire LED V-CG-S
(2 x 3 W) Linear fluorescent luminaire LED V-CG-S Completely monitored explosion-protected LED light Await live of the LED module from 75.000 hours Different luminous colours available 4000 K / 5600 K
Technical Application Guide for UP-SHINE LED Batten Light UP-DB W
Technical Application Guide for UP-SHINE LED Batten Light UP-DB18-16-4W Introduction DB18 is a high quality LED batten with high luminous efficacy 115lm/w. With a reliable and robust housing structure
Technical Application Guide for UP-SHINE LED Batten Light UP-DB W
Technical Application Guide for UP-SHINE LED Batten Light UP-DB18-16-5W Introduction DB18 is a high quality LED batten with high luminous efficacy 115lm/w. With a reliable and robust housing structure
Technical Application Guide for UP-SHINE LED Batten Light UP-DB W
Technical Application Guide for UP-SHINE LED Batten Light UP-DB18-7-2W Introduction DB18 is a high quality LED batten with high luminous efficacy 115lm/w. With a reliable and robust housing structure (IK1
2.2. Ex-Linear LED light fittings. ellk/m 92 LED 400/800 / ellk/m 92 LED 400/800 V-CG-S / NE / NE-HT / NIB-HT / NIB-CSA (Zone 1, 2, 21, 22)
. Ex-Linear LED light fittings ellk/m 9 LED 400/800 / ellk/m 9 LED 400/800 V-CG-S / NE / NE-HT / NIB-HT / NIB-CSA (Zone 1,, 1, ) The efficient solution your explosion-protected lighting concept The explosion-protected
TITAN. A range of elegant technical luminaires designed to withstand extreme vandalism in public spaces. 114 / Securlite
TITAN A range of elegant technical luminaires designed to withstand extreme vandalism in public spaces. More light, less maintenance: the Titan is the long-life lighting solution that project owners and
OLE DURA ST SERIES LIGHTING IN AN EFFICIENT AND SUSTAINABLE MANNER CHARACTERISTICS - LUMINAIRE FEATURES IP66. Ingress Protection IK09
SINCE 1993 2018 STREET LIG LIGHTING GHTING G Light+Building 2018 - M Messe esse Frank Frankfurt kfurt Exhibition Gm mbh Exhibition GmbH 18. - 2 23. March 2 018 2018 Booth No N : Hall 5 / C98 C Ligght Light
2.4. Ex-Emergency light fittings with a self-contained battery system for fluorescent lamps
.4 Ex-Emergency light fittings with a self-contained battery system for fluorescent lamps ellk 18/18 NE / ellk 36/36 NE / ellm 18/18 NE (Zone 1,, 1, ) If you need a reliable and decentralized emergency
TECHNICAL DATA CRI CURRENT
ACADEMY OPAL PRISM 100mm Ideal replacement for linear fluorescent Designed for surface mounting in office and educational environments Steel backplate with polycarbonate diffuser, secured by screwed endcaps
ADEL - BARA NESO - NG
- With simple and super-thin design, luminaires looks very modern. With delicate structure of radiator, luminaires is more powerful in heat sinking and can reach IP66. Multiple choose for installation,
The Fila is a sleek architectural luminaire, designed for lighting public spaces and enhancing buildings.
FILA Clean lines The Fila is a sleek architectural luminaire, designed for lighting public spaces and enhancing buildings. Very sturdy thanks to its IK10 ++ / 80 joules diffuser, very elegant thanks to
Floodlight Series 6121
www.stahl.de Floodlight > For use in gas group IIC (-20 C... +C) gas group IIB + H 2 (-C... +C) > Material Enclosure in seawater resistant cast aluminium Mounting components in stainless steel > Lamp options
IP65 FLUO 2X18W 2X36W
IP65 FLUO 2X18W 2X36W Features Housing made of reinforced polyester glass fiber (GRP) High transparent and impact resistant PC diffuser Both standard and emergency modes available Operation and survive
L: pole type. X: ceiling type. Lamp number Lamp wattage(w) Explosion-proof light fittings for fluorescent lamp BAY51-18 x 1L
Lighting Technology BAY- x Series Explosion-proof Light Fittings for Fluorescent Lamp Explosion protection to -CENELEC -IEC Can be used in Zone and Zone One or two lamp version; Available lamp wattage:
Waterproof TCW060 just light
Lighting Waterproof TCW060 just light TCW060 Designed for use in demanding environments, TCW060 is an economical, compact waterproof luminaire. Dedicated versions are available for TL-D and TL5 lamps.ingressprotected
Sheet-Steel Light Fittings Series 6014 / 6414
> As 1-, 2-, 3- or 4-lamp version > Versions pendant light fittngs wall-mounting s recessed s > Powder-coated sheet-steel or stainless steel > Central lock > All-pole disconnection via NC switch in positive
explosive environments Lighting
explosive environments Lighting CLASSIFICATION OF THE ZONES GAS AND VAPOURS DUST PRESENCE OF EXPLOSIVE ATMOSPHERE ZONE 0 ZONE 20 Category 1G Category 1D Permanent ZONE 1 ZONE 21 Category 2G Category 2D
4.7. Ex-Floodlights for high-pressure discharge lamps, series FZD 04 (Zone 1, 2, 21, 22)
.7 Ex-Floodlights for high-pressure discharge lamps, series FZD 0 (Zone 1, 2, 21, 22) The maintenance- and installation-friendly FZD 0 floodlights for harsh operating conditions Due to the spatial separation
PRODUCT BROCHURE. Light fittings, floodlights & beacons LED range for explosive atmospheres
PRODUCT BROCHURE Light fittings, floodlights & beacons range for explosive atmospheres 2 LIGHT FITTINGS, FLOODLIGHTS & BEACONS - RANGE FOR EXPLOSIVE ATMOSPHERES 01 02 03 04 05 06 INTRODUCTION - : SAVE
Compact Emergency Light Fittings Series C-LUX 6108 / 6508
> Operating modes non-maintained operation non-maintained operation with switchable emergency light blocking > With continous operating test > For fluorescent lamps 8 W, d 16 mm, for two-pin holder G5
3F Linux. Simply modular. 3F Linux D. 3F Linux L
3F Linux 3F Linux Simply modular 3F Linux is a modular system designed to allow you to compose channels as simply and efficiently as possible. Like all products in the 3F Filippi range, it is fitted with
ATM Lighting sp. z o.o
INSTALLATION AND MAINTENANCE MANUAL FOR LIGHT FITTING INX230LED Carefully read the instructions before mounting the light fitting. ATM Lighting sp. z o.o., ul. Budowlanych 31, 80-298 Gdańsk, tel: +48 58
FHL. Ex d. Body in aluminium
Ex d FHL Body in aluminium - Zones 1, 2, 21, 22 - Integrated electronic ballast - Power supply 24 V DC - Compact 24/36 W fluorescent tube - Degree of protection IP66 Guard in stainless steel Polycarbonate
7 Lighting Technology
7 Lighting Technology Compact Emergency Light Fittings C-LUX 6108 (Zones 1 & 2, 21 & 22) C-LUX 6508 (Zones 2, 22) 01908E00 Series C-LUX 6108 and 6508 compact emergency lighting fitting can be used for
WELLGLASS EV.. Series - H.I.D. well glass lighting fixture. Aluminium with low content of copper. O-ring made of Nitrile Rubber (NBR)
WELLGLASS EV.. Series - H.I.D. well glass lighting fixture EV.. series well glass lighting fixtures are suitable for hazardous areas of industrial plants for lighting of indoor and outdoor structures,
Industrial luminaires
Industrial luminaires Acciaio 112 Leader BS 101 114 Leader BS 103 3G 115 Leader BS 111 116 Leader BS 113 117 Leader 21-01, 21-04 118 BS100, BS110 119 Tores 23-01 120 Castor 25-05 121 Lumino 26-91 122 Leo
Light Fittings for Fluorescent Lamps Series EXLUX 6000 / 6400
> As pendant light fitting or side entry lamp > Version with 1 or 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened > End of life
I 16A 2-pole up to 50 V I I 16A 3-pole up to 50 V I
I 6A 2-pole up to 50 V I I 6A 3-pole up to 50 V I Flange socket Coupler Technical data Ex-plugs and receptacles for low voltage, 2- and 3-pole acc. to IEC 60309-/2 Marking accd. to 94/9/EC II 2 G Ex de
XSP High Output Series
XSP High Output Series XSPR TM High Output LED Street/Area Luminaire Product Description In addition to a low initial cost, the XSPR High Output LED Street Light maintains the familiar look of the traditional
Tubular Light Fitting with LED Series 6036
> Extremely robust luminaire design for rough ambient conditions > Very lightweight and vibration resistant LED light fitting > Extremely long service life due to high power LEDs used including driver
Spec Sheet: IEC309 Switched Socket, Horizontal 16A. Part Number
Spec Sheet: IEC309 Switched Socket, Horizontal 16A Part Numbers Part Number EU67HSS316 EU67HSS416 EU67HSS516 Description IEC309 16A 3 Pin switched socket IEC309 16A 4 Pin switched socket IEC309 16A 5 Pin
Zone 1 Linear Range - Installation Guide
Zone 1 Linear Range - Installation Guide CML14ATEX3119 & IEC Ex CML15.0001 This installation guide provides instructions for installing SPARTAN series of explosion protected Zone 1 Linear luminaires. Text