Easy and safe installation

Size: px
Start display at page:

Download "Easy and safe installation"

Transcription

1 ATX LUMINAIRES 7 Easy and safe installation Safety Plus : 1- Mounting can be completed with one hand 2- One handed opening using standard tool 3- Reflector swivels easy access 4- Terminal shield cover opens 5- Easy wiring 4 5

2 8 INCREASED SAFETY EEx e BI-PIN FLUORESCENT LUMINAIRES ATX: Safety Plus every day The whole ATX EEx e bi-pin fluorescent range offers 8 advantages in terms of installation, maintenance, and servicing in hazardous areas Positive safety switch enabling lamps to be changed with main power switched on 2 Quick connector for easy replacement of ballast ensuring wiring safety 3 IP 2X terminal shield enabling ballast to be worked on with main power present 4 Lampholders with locating device for easy tube fitting 5 Replaceable IP 66/67 weatherproof elastomer seal for easy maintenance 6 Threaded cable entries : robust construction and direct screwing of the cable gland New: 3 tube solutions 7 Mechanism prevents energizing the luminaire while cover is open ensurng safe operation The use of 3 tube versions provides increased light intensity, thus reducing the number of units required. Units are available on request with alternate use of the tubes providing greater flexibility of use and quicker installation, while reducing the number of boxes + cables... all thanks to the 3 tube solution with dimmer control. 3 tube switch dimmer control on request 8 Central opening using size 10 Allen key or 6 mm flat screwdriver for easy access 3 tubes lit, standard version without dimmer Central tube lit 2 tubes lit 3 tubes lit

3 Increased safety lighting 9 CONTENTS Equipment for zones 1 and 2 and 21 and 22 Increased safety bi-pin fluorescent luminaires 8-110/127 V - 220/240 V non-armoured cable /127 V - 220/240 V armoured cable /127 V - 220/240 V single phase loop in loop out through wiring V armoured and non-armoured cable 16 Emergency lighting: Normal and emergency bi-pin /127 V - 220/240 V non-armoured cable /127 V - 220/240 V armoured cable /127 V - 220/240 V single phase loop in loop out through wiring /240 V AC and 110 V DC /240 V self-test non-armoured cable 28 Mono-pin fluorescent luminaires - 110/127 V - 220/240 V armoured or non-armoured cable 30 - Normal-emergency 220/240 V armoured or non-armoured cable 32 Level gauge light fitting 110/127 V - 220/240 V non-armoured cable 34 Dimensions of fixing accessories 36 Installation method for fluorescent luminaires 38 Bi-pin metal-glass fluorescent luminaires - 220/240 V non-armoured cable 40 - Normal-emergency 220/240V non-armoured cable 42 Intrinsic and increased safety torches dual lens 45 Intrinsic and increased safety torches 2 cell and 3 cell 46 Round bulkhead light non-armoured cable 47 European Directive and bi-pin fluorescent luminaires 48 Equipment for zones 2 and /127 V - 220/240 V bi-pin fluorescent luminaires armoured and non-armoured cable - heavy duty 50 - light duty /240 V normal-emergency fluorescent luminaires - heavy duty 54 - light duty 56 Zone 2 and 22 floodlights armoured and non-armoured cable 58 Zone 2 and 22 round bulkhead light armoured and non-armoured cable 59 Zone 2 and 22 wellglass luminaires armoured and non-armoured cable 60 EGS Group 63 Spare parts 290 Certificates 292 ATX guide 302

4 10 110/127 V and 220/240 V bi-pin fluorescent luminaires for non-armoured cable increased safety Fluo 2 x 58 W Fluo 2 x 18 W Fluo 2 x 36 W Pole-mounting fluo 2 x 18W 18, 36 and 58 W fluorescent luminaires Ø 26 mm mono and bi-pin tubes, standard G13 lampholders Frequency : 50/60 Hz Power supply via high frequency ballast depending on version : 110/127 V ± 10% AC/DC or 220/240 V~ ± 10%, 198 to 264 V Instant start. Power factor channel ballast Pre-impregnated fibre glass reinforced polyester body Polycarbonate diffuser hinged to body Polycarbonate multi-parabolic hinged reflector High temperature internal wiring Elastomer gasket Anti-vibration lampholders with spring system Power supply to the unit cut off by positive safety switch which operates when diffuser is opened, for replacing tubes with mains power switched on If one tube fails, the other tubes remain lit. Open and close using an Allen key or flat screwdriver (system automatically protects against over turning of the key or screwdriver) IP 2X terminal strip cover for maintaining the ballast and lampholders without cutting off the mains power supply Ballast fixed by screws, equipped with an anti-vibration fast connector Standard single, twin, three-tube versions Three M25 threaded cable entries, two at one end and the third at the opposite end. Supplied with: One M25 polyamide cable gland (sealed Ø 8 to 18.5 mm) Two M25 blanking plugs One 5 x 4 mm 2 max. flexible or 5 x 6 mm 2 max. rigid connection terminal block Tube (W) Weight Volume Cat. No. Cat. No. Pack not supplied (Kg) (dm 3 ) 110/127 V 220/240 V 1 x x x x x x x x Twin tube through-wiring version Three M25 threaded cable entries, two at one end and the third at the opposite end. Supplied with: Two M25 polyamide cable glands (sealed Ø 8 to 18.5 mm) 1 x M25 blanking plug One connection terminal block at each end: 5 x 4 mm 2 max. flexible or 5 x 6 mm 2 max. rigid (2.5 mm 2 internal wiring) Part number in bold : fast moving references Tube (W) Weight Volume Cat. No. Cat. No. Pack not supplied (Kg) (dm 3 ) 110/127 V 220/240 V 2 x x x Twin tube pole mounting version For mounting on pole or Ø 42 mm tubular wall-mounting support with 1 integrated M25 cable gland entry (sealed Ø 8 to 18.5 mm) Supplied with one 3 x 4 mm 2 connection terminal block and internal clamp for anchoring the cable (positive safety) Tube (W) Weight Volume Cat. No. Cat. No. Pack not supplied (Kg) (dm 3 ) 110/127 V 220/240 V 2 x x Fixing accessories Cat. No. Set of 2 half clamps for fixing to Ø 49 mm (1 1/2) or Ø 42 mm (1 1/4) tube For fixing to Ø 60 mm (2 ) tube Set of 2 zinc-plated steel M8 ring bolts for suspending the unit Ø 42 mm galvanized steel pole for wall mounting Set of 2 aluminium brackets for fixing unit to flat surface. 316 stainless steel version Set of 2 aluminium hinged brackets for adjusting direction of luminaire when wall-mounted. 316 stainless steel version Set of 2 zinc-plated steel brackets for quick fixing with one hand 316 stainless steel version Fall prevention fixing kit (1.20 m stainless steel chain) for M25 cable entry NEW For special options, please consult us: Ø 38 mm bi-pin tubes Ø 38 mm bi-pin tubes specially designed for low temperatures 3-tube dimmable Special protection of the diffuser against severe chemical attack Lens fall prevention fixing kit Dimensions of fixing accessories (see page 36-37) Installation and connection method (see page 38-39) Spare parts (see page 290) Pack

5 11 TECHNICAL DATA Zones : 1 and 2 and Classification : According to CENELEC: Conforming to ATEX - 94/9 EC Directive and standards EN EC 0081 II 2 G for gas EEx ed II C T4 or T5 to Ta max C horizontal position, lighting facing downwards. EC 0081 II 2 D T = + 85 C : for dust According to IEC: Conforming to IEC standards /1/7 Ex eds II C T4 or T5 to Ta max. 40 C horizontal position, lighting facing downwards. DIP A21 TA = + 85 C Approvals : Approved type FLe CENELEC LCIE 98 ATEX 6004 IEC LCIE Ex declaration of conformity No Conforming to standards EN and IEC for luminaires Conforming to standards EN and IEC combustible dust Conforming to electromagnetic compatibility (EMC) standards - EN EN Protection index : IP 66/67 according to EN and IEC Mechanical resistance: IK10 according to EN Operating temperature : - 20 C to + 55 C Anticorrosion treatment and climate protection : see page G50 Positive safety : Safety switch for opening luminaire, see glossary Anti-wiring-error connector Dimmable 3-tube operation : Alternate use possible (1, 2 or 3 tubes) controlled by a double switch, available on request Zone 1 & 2-21 & 22 ATEX IEC EC II2 G/D EEx ed IIC T4 or T5 T = 85 C IP 66/67 IK 10 Dimensions (mm) : Standard/through-wiring version 18 W 36 W Pole-mounting version , Ø 42 Photometric data (photometry p. G62) polar curves for a 1000 lm flux, according to NF C : longitudinal Luminaire symbol according to NF C transverse (1 x 18 W) Efficiency 94,8 % NF C : 0,86 H + 0,09 T (1 x 36 W) Efficiency 89,3 % NF C : 0,81 H + 0,08 T 58 W 36 W 18 W (2 x 18 W) Efficiency 85,1 % NF C : 0,78 H + 0,08 T (2 x 36 W) Efficiency 80,5 % NF C : 0,73 H + 0,07 T 50 (3 x 36 W) Efficiency 68,1 % NF C : 0,63 G + 0,05 T Ø 42 Central tube lit 2 tubes lit 3 tubes lit Product features/customer benefits - Positive safety switch : Safety Plus - Multi-parabolic reflector : increased efficiency - Ballast with plug in connectors : rapid, error-free maintenance - Opening system automatically protected : no over turning of the key or screwdriver possible - Standard 3-tube : increased light intensity, fewer units, installation possible at increased height - 3-tube dimmable : alternate use of the tubes with a double switch, flexibility of use (1 x 58 W) Efficiency 87,5 % NF C : 0,80 H + 0,07 T (2 x 58 W) Efficiency 76,9 % NF C : 0,70 H + 0,07 T (3 x 58 W) Efficiency 65,6 % NF C : 0,61 G + 0,04 T Data sheet available on request

6 12 110/127 V and 220/240 V bi-pin fluorescent luminaires for armoured cable increased safety Fluo 2 x 58 W Fluo 2 x 36 W Fluo 2 x 18 W 18, 36 and 58 W fluorescent luminaires Ø 26 mm bi-pin tubes, standard G 13 lampholders Frequency: 50/60 Hz Power supply via high frequency ballast depending on version : 110/127 V ± 10% AC/DC or 220/240 V~ ± 10%, 198 to 264 V Instant start. Power factor channel ballast Pre-impregnated fibre glass reinforced polyester body Polycarbonate diffuser hinged to body Polycarbonate multi-parabolic hinged reflector High temperature internal wiring Elastomer gasket Anti-vibration lampholders with spring system Power supply to the unit cut off by positive safety switch which operates when diffuser is opened, for replacing tubes with mains power switched on If one tube fails, the other tubes remain lit. Open and close using an Allen key or flat screwdriver (system automatically protects against over turning) IP 2X terminal strip cover for maintaining the ballast and lampholders without cutting off the mains power supply Ballast fixed by screws, equipped with an anti-vibration fast connector Standard single, twin, three-tube version Two M20 threaded cable entries with earth continuity plate for armoured cables at one end (cable gland not supplied) One clearance hole for M20 cable gland at the opposite end Supplied with: Two M20 blanking plugs and one M20 locknut One 5 x 4 mm 2 max. flexible or 5 x 6 mm 2 max. rigid connection terminal block Tube (W) Weight Volume Cat. No. Cat. No. Pack not supplied (Kg) (dm 3 ) 110/127 V 220/240 V 1 x x x x x x x x Through-wiring version with possibility of phase balancing Three M20 threaded cable entries with earth continuity plate for armoured cables, 2 cable entries at one end, and the third at the opposite end (cable gland not supplied) Supplied with: 1 x M20 blanking plug One 5 x 4 mm 2 max. flexible or 5 x 6 mm 2 max. rigid (2.5 mm 2 internal wiring) connection terminal block at each end Tube (W) Weight Volume Cat. No. Cat. No. Pack not supplied (Kg) (dm 3 ) 110/127 V 220/240 V 2 x x x Fixing accessories NEW Cat. No. Set of 2 half clamps for fixing to Ø 49 mm (1 1/2) or Ø 42 mm (1 1/4) tube For fixing to Ø 60 mm (2 ) tube: Set of 2 zinc-plated steel M8 ring bolts for suspending the unit Set of 2 aluminium brackets for fixing unit to flat surface. 316 stainless steel version Set of 2 aluminium hinged brackets for adjusting direction of luminaire when wall-mounted. 316 stainless steel version Set of 2 zinc-plated brackets for quick fixing with one hand 316 stainless steel version Fall prevention fixing kit (1.20 m stainless steel chain) for M20 cable entry For special options, please consult us: Ø 38 mm bi-pin tubes Ø 38 mm bi-pin tubes specially designed for low temperatures 3-tube dimmable Special protection of the diffuser against severe chemical attack Lens fall prevention fixing kit Dimensions of fixing accessories (see page 36-37) Installation and connection method (see page 38-39) Spare parts (see page 290) Cable glands for armoured cable (see pages ) Pack Part number in bold : fast moving references

7 13 TECHNICAL DATA Zones : 1 and 2 and Classification : According to CENELEC: Conforming to ATEX - 94/9 EC Directive and standards EN EC 0081 II 2 G for gas EEx ed II C T4 or T5 to Ta max C horizontal position, lighting facing downwards EC 0081 II 2 D T = + 85 C: for dust According to IEC: Conforming to IEC standards /1/7 Ex eds II C T4 or T5 to Ta max C horizontal position, lighting facing downwards. DIP A21 TA = + 85 C Approvals : Approved type FLe CENELEC LCIE 98 ATEX 6004 IEC LCIE Ex declaration of conformity No Conforming to standards EN and IEC for luminaires Conforming to standards EN and IEC combustible dust Conforming to electromagnetic compatibility (EMC) standards - EN EN Zone 1 & 2-21 & 22 ATEX IEC EC II2 G/D EEx ed IIC T4 or T5 T = 85 C IP 66/67 IK 10 Dimensions (mm) : Standard/through-wiring version 18 W 36 W Photometric data (photometry p. G62) polar curves for a 1000 lm flux, according to NF C : longitudinal Luminaire symbol according to NF C transverse (1 x 18 W) Efficiency 94,8 % NF C : 0,86 H + 0,09 T 58 W (2 x 18 W) Efficiency 85,1 % NF C : 0,78 H + 0,08 T Protection index : IP 66/67 according to EN and IEC Mechanical resistance: IK10 according to EN Operating temperature : - 20 C to + 55 C Anticorrosion treatment and climate protection : see page G50 (1 x 36 W) Efficiency 89,3 % NF C : 0,81 H + 0,08 T (2 x 36 W) Efficiency 80,5 % NF C : 0,73 H + 0,07 T (3 x 36 W) Efficiency 68,1 % NF C : 0,63 G + 0,05 T Positive safety : Safety switch for opening luminaire, see glossary Anti-wiring-error connector Dimmable 3-tube operation : Alternate use possible (1, 2 or 3 tubes) controlled by a double switch, available on request Central tube lit 2 tubes lit 3 tubes lit (1 x 58 W) Efficiency 87,5 % NF C : 0,80 H + 0,07 T (2 x 58 W) Efficiency 76,9 % NF C : 0,70 H + 0,07 T (3 x 58 W) Efficiency 65,6 % NF C : 0,61 G + 0,04 T Product features/customer benefits - Positive safety switch : Safety Plus - Multi-parabolic reflector : increased efficiency - Ballast with plug in connectors : rapid, error-free maintenance - Opening system automatically protected : no over turning possible - Standard 3-tube : increased light intensity, fewer units, installation possible at increased height - 3-tube dimmable : alternate use of the tubes with a double switch, flexibility of use Data sheet available on request

8 14 110/127 V or 220/240 V bi-pin single phase loop in loop out connection and through wiring fluorescent luminaires for armoured cable increased safety Fluo 2 x 58 W Fluo 2 x 36 W Fluo 2 x 18 W 18, 36 and 58 W fluorescent luminaires Ø 26 mm bi-pin tubes, standard G 13 lampholders Designed for single phase mains supplies with a choice of possible installation methods: terminal position loop in loop out connection and through wiring Frequency: 50/60 Hz Power supply via high frequency ballast depending on version : 110/127 V ± 10% AC/DC or 220/240 V~ ± 10%, 198 to 264 V Instant start. Power factor channel ballast Pre-impregnated fibre glass reinforced polyester body Polycarbonate diffuser hinged to body Polycarbonate multi-parabolic hinged reflector High temperature internal wiring Elastomer gasket Anti-vibration lampholders with spring system Power supply to the unit cut off by positive safety switch which operates when diffuser is opened, for replacing tubes with mains power switched on If one tube fails, the other tube remains lit. Open and close using an Allen key or flat screwdriver (system automatically protects against over turning) IP 2X terminal strip cover for maintaining the ballast and lampholders without cutting off the mains power supply Ballast fixed by screws, equipped with a fast connector Three M20 threaded cable entries with earthing plates for armoured cable (cable gland not supplied) Supplied with: Two M20 blanking plugs One connection terminal block at each end 4 x 4mm 2 flexible or 4 x 6mm 2 rigid max., including 1 earth terminal Single phase dual loop in loop out connection/through wiring version Tube (W) Weight Volume Cat. No. Cat. No. Pack not supplied (Kg) (dm 3 ) 110/127 V 220/240 V 2 x x x Fixing accessories Cat. No. Set of 2 half clamps for fixing to Ø 49 mm (1 1/2) or Ø 42 mm (1 1/4) tube For fixing to Ø 60 mm (2 ) tube Set of 2 zinc-plated steel M8 ring bolts for suspending the unit Set of 2 aluminium brackets for fixing unit to flat surface. 316 stainless steel version Set of 2 aluminium hinged brackets for adjusting direction of luminaire when wall-mounted. 316 stainless steel version Set of 2 zinc-plated steel brackets for quick fixing with one hand 316 stainless steel version Fall prevention fixing kit (1.20 m stainless steel chain) for M20 cable entry NEW For special options, please consult us: Ø 38 mm bi-pin tubes Ø 38 mm bi-pin tubes specially designed for low temperatures 3-tube dimmable Special protection of the diffuser against severe chemical attack Lens fall prevention fixing kit Dimensions of fixing accessories (see page 36-37) Installation and connection method (see page 38,39) Spare parts (see page 290) Cable glands for armoured cable (see pages ) Pack Part number in bold : fast moving references

9 15 TECHNICAL DATA Zones : 1 and 2 and Classification : According to CENELEC: Conforming to ATEX - 94/9 EC Directive and standards EN EC 0081 II 2 G: for gas EEx ed II C T4 or T5 to Ta max C horizontal position, lighting facing downwards. EC 0081 II 2 D T = +85 C for dust According to IEC: Conforming to IEC standards /1/7 Ex eds II C T4 or T5 to Ta max. 40 C horizontal position, lighting facing downwards. DIP A21 TA = + 85 C Approvals : Approved type FLe CENELEC LCIE 98 ATEX 6004 IEC LCIE Ex declaration of conformity No Conforming to standards EN and IEC for luminaires Conforming to standards EN and IEC combustible dust Conforming to electromagnetic compatibility (EMC) standards - EN EN Zone 1 & 2-21 & 22 ATEX IEC EC II2 G/D EEx ed IIC T4 or T5 T = 85 C IP 66/67 IK 10 Dimensions (mm) : Single phase loop in loop out connection/through wiring version 18 W W Photometric data (photometry p. G62) polar curves for a 1000 lm flux, according to NF C : longitudinal Luminaire symbol according to NF C transverse (2 x 18 W) Efficiency 85,1 % NF C : 0,78 H + 0,08 T 36 W Protection index : IP 66/67 according to EN and IEC Impact resistance: IK10 according to EN Operating temperature : - 20 C to + 55 C Anticorrosion treatment and climate protection : see page G50 (2 x 36 W) Efficiency 80,5 % NF C : 0,73 H + 0,07 T Positive safety : Safety switch for opening luminaire, see glossary Anti-wiring-error connector (2 x 58 W) Efficiency 76,9 % NF C : 0,70 H + 0,07 T Product features/customer benefits - Positive safety switch : Safety Plus - Multi-parabolic reflector : increased efficiency - Ballast with plug in connectors : rapid error-free maintenance - Opening system automatically protected : no over turning possible Data sheet available on request

10 V bi-pin fluorescent luminaires for armoured or non-armoured cable increased safety Fluo 2 x 36 W Fluo 2 x 18 W 18 and 36 W fluorescent luminaires Ø 26 mm bi-pin tubes, standard G 13 lampholders Frequency: 50/60 Hz Power supply via high frequency electronic ballast 254 V + 6% - 10%, 229 to 269 V Instant start. Power factor channel ballast Pre-impregnated fibre glass reinforced polyester body Polycarbonate diffuser hinged to body Polycarbonate multi-parabolic hinged reflector High temperature internal wiring Elastomer gasket Anti-vibration lampholders with spring system Power supply to the unit cut off by positive safety switch which operates when diffuser is opened, for replacing tubes with mains power switched on If one tube fails, the other tube remains lit. Open and close using an Allen key or flat screwdriver (system can be disengaged at end of travel) IP 2X terminal strip cover for maintaining the ballast and lampholders without cutting off the mains power supply Ballast fixed by screws, equipped with a fast connector Standard twin version for non-armoured cable Three threaded cable entries, 2 at one end and the third at the opposite end for M25 cable gland. Supplied with: One M25 polyamide cable gland (sealed Ø 8 to 18.5 mm) Two M25 blanking plugs One 5 x 4 mm 2 max. flexible or 5 x 6 mm 2 max. rigid connection terminal block Tube (W) Weight Volume Cat. No. Pack not supplied (Kg) (dm 3 ) 254V 2 x x Standard twin version for armoured cable Two M20 threaded cable entries with earthing plate for armoured cable at one end (cable gland not supplied) One clearence hole for M20 cable gland at the opposite end Supplied with Two M20 blanking plugs and one M20 locknut One 5 x 4 mm 2 max. flexible or 5 x 6 mm 2 max. rigid connection terminal block Tube (W) Weight Volume Cat. No. Pack not supplied (Kg) (dm 3 ) 254V 2 x x Fixing accessories Cat. No. Set of 2 half clamps for fixing under Ø 49 mm (1 1/2) or Ø 42 mm (1 1/4) tube For fixing under Ø 60 mm (2 ) tube Set of 2 zinc-plated steel M8 ring bolts for suspending the unit Set of 2 aluminium brackets for fixing unit to flat surface. 316 stainless steel version Set of 2 aluminium hinged brackets for adjusting direction of luminaire when wall-mounted. 316 stainless steel version Set of 2 zinc-plated brackets for quick fixing with one hand 316 stainless steel version Fall prevention fixing kit (1.20 m stainless steel chain) for M20 cable entry Fall prevention fixing sling (1.20 m stainless steel chain) for M25 cable entry NEW For special options, please consult us: Single tube Fa6 tube Pole mounting version Special protection of the diffuser against severe chemical attack Lens fall prevention fixing kit Dimensions of fixing accessories (see page 36-37) Installation and connection method (see page 38-39) Spare parts (see page 290) Cable glands for armoured cable (see pages ) Pack Part number in bold : fast moving references

11 17 TECHNICAL DATA Zones : 1 and 2 and Classification : According to CENELEC : Conforming to ATEX - 94/9 EC Directive standards EN EC 0081 II 2 G : for gas EEx ed II C T4 or T5 to Ta max C horizontal position, lighting facing downwards. EC 0081 II 2 D T = + 85 C : for dust According to IEC : Conforming to IEC standards /1/7 Ex eds II C T4 or T5 to Ta max C horizontal position, lighting facing downwards DIP A21 TA = + 85 C Approvals : Approved type FLe CENELEC LCIE 98 ATEX 6004 IEC LCIE Ex declaration of conformity No Conforming to standards EN and IEC for luminaires Conforming to standards EN and IEC combustible dust Conforming to electromagnetic compatibility (EMC) standards - EN EN Zone 1 & 2-21 & 22 ATEX IEC EC II2 G/D EEx ed IIC T4 or T5 T = 85 C IP 66/67 IK 10 Dimensions (mm) : Standard version W 18 W Photometric data (photometry p. G62) polar curves for a 1000 lm flux, according to NF C : longitudinal Luminaire symbol according to NF C transverse (2 x 18 W) Efficiency 85,1 % NF C : 0,78 H + 0,08 T , Ø Ø 42 Protection index : IP 66/67 according to EN and IEC Impact resistance : IK10 according to EN Operating temperature : - 20 C to + 55 C Anticorrosion treatment and climate protection : see page G50 (2 x 36 W) Efficiency 80,5 % NF C : 0,73 H + 0,07 T Positive safety : Safety switch for opening contact luminaire, see glossary Anti-wiring-error connector Product features/customer benefits - Positive safety switch : Safety Plus - Multi-parabolic reflector : increased efficiency - Ballast with connectors : rapid error-free maintenance - Opening mechanism can be disengaged : protected system Data sheet available on request

12 18 NORMAL - EMERGENCY LIGHTING UNITS ATX emergency lighting : giving you the product, plus many special features Choice of power supply For emergency lighting in hazardous locations, ATX offers fluorescent luminaires with two types of power supply, one centralized with central battery, the other via self-contained units with an integrated battery. Choice between three types of ATEX product Depending on the emergency system and whether it is based on a centralized or self-contained battery, you can choose between three types of product with different functions. You also have the option of manual or automatic tests depending on the range. Beep Beep Beep Memory Central battery (back up) a single electric installation for power supply 220/240 V ~ and 110 V = Self-contained normal-emergency with integrated battery Self-contained normalemergency with auto-test

13 19 choice of power supply and type of benefits The same benefits as the fluorescent range... The normal-emergency bi-pin fluorescent luminaires incorporate all the technical benefits of the increased safety fluorescent range : safe closing, and easy maintenance. Work can also be performed with the mains power switched on. Plus three special benefits In addition, normal-emergency bi-pin fluorescent luminaires have features specially designed for their applications. See photos below. LED indicates that batteries are charging, and that the unit is in good working order. It also confirms feedback of information for auto-test devices. Two positive safety switches allow work to be carried out with the mains power switched on, by : - Cutting the mains power - Cutting the battery power Plug-in battery pack which is easy to remove in situ with the mains power switched on, for units with integrated battery.

14 20 110/127 V - 220/240 V normal-emergency bi-pin fluorescent luminaires for non-armoured cable increased safety Fluo 2 x 58 W Charge indicating light Fluo 2 x 36 W Fluo 2 x 18 W 18, 36 and 58 W fluorescent luminaires for normal and emergency lighting Ø 26 mm bi-pin tubes, standard G13 lampholders Frequency : 50/60 Hz Common power supply circuit to provide both normal lighting and emergency lighting Power supply via high frequency electronic ballast according to model: 110/127 V ± 10% AC/DC or 220/240 V~ ± 10%, 198 to 264 V Instant start - Power factor 0.95 Battery voltage : 18 W : 6 V 4 A - 36 W/58W : 8.4 V 4 A Pre-impregnated fibre glass reinforced polyester body Polycarbonate multi-parabolic hinged reflector Polycarbonate diffuser hinged to body High temperature internal wiring Elastomer gasket Anti-vibration lampholders with spring system Operation : mains power switched on : 2 or 3 tubes lit mains power switched off : 1 tube lit (battery backed) Power supply to the unit (mains supply and battery) cut off by two positive safety switches which operate when diffuser is opened, for replacing tubes with mains power switched on Green LED on when the installation is operating normally and off in the event of a mains power supply failure or battery fault Battery-backed tube identified with green mark Battery pack easily interchangeable on site, fixed by screws and equipped with a fast plug in connector Ballast and converter assembly fixed by screws, equipped with an antivibration fast connector Open and close using an Allen key or flat screwdriver (system automatically protects against over turning) Standard twin, three-tube version Supplied with one M25 polyamide cable gland (sealed Ø : 8 to 18.5 mm) Two M25 blanking plugs Equipped with an IP 2 X terminal strip cover for maintenance of batteries, ballast and lampholders with mains power switched on 18 W version: one 4 x 4 mm 2 flexible or 4 x 6 mm 2 rigid connection terminal block max. including one earth terminal 36/58W version: one 2 x 4 x 4 mm 2 flexible or 2 x 4 x 6 mm 2 rigid connection terminal block max. including 2 earth terminals Tube (W) 1 tube Light Weight Volume Cat. No. Cat. No. Pack (not supplied) standby time intensity (Kg) (dm 3 ) 110/127 V 220/240 V 2 x 18 3 h 29 % x 18 3 h 29 % x 36 3 h 16 % x 58 3 h 11% x 36 3 h 16% x 58 3 h 11% Part number in bold : fast moving references Twin tube through-wiring version Supplied with Two M25 polyamide cable glands (sealed Ø: 8 to 18.5 mm) One M25 blanking plug Two 4 x 4 mm 2 flexible or 4 x 6 mm 2 rigid. connection terminal blocks max. 18W : Maintenance of tubes with mains power switched on, maintenance of batteries, ballast and lampholders on site with mains power switched off 36W : Equipped with IP 2 X terminal strip cover, enabling maintenance of the batteries, ballast and lampholders with the mains power switched on Tube (W) 1 tube Light Weight Volume Cat. No. Cat. No. Pack (not supplied) standby time output (Kg) (dm 3 ) 110/127 V 220/240 V 2 x 18 3 h 29 % x 36 3 h 16 % Twin tube pole mounting version For mounting on pole or tubular wall-mounting support ø 42 mm with one integrated M25 polyamide cable gland (sealed Ø 8 to 18.5 mm) Supplied with one 3 x 4 mm 2 connection terminal block and internal bracket for anchoring the cable (positive safety) Tube (W) 1 tube Light Weight Volume Cat. No. Cat. No. Pack (not supplied) standby time output (Kg) (dm 3 ) 110/127 V 220/240 V 2 x 18 W 3h 29 % x 36 W 3 h 16 % Fixing accessories Pole mounting fluo 2 x 18W Cat. No. Set of 2 half clamps for fixing under Ø 49 mm (1 1/2) or Ø 42 mm (1 1/4) tube For fixing under Ø 60 mm (2 ) tube: Set of 2 zinc-plated steel M8 ring bolts for suspending the unit Ø 42 mm galvanized steel pole for wall mounting Set of 2 aluminium brackets for fixing unit to flat surface. 316 stainless steel version Set of 2 aluminium hinged brackets for adjusting direction of luminaire when wall-mounted. 316 stainless steel version Set of 2 zinc-plated steel brackets for quick fixing with one hand 316 stainless steel version Fall prevention fixing kit (1.20 m stainless steel chain) for M25 cable entry NEW For special options, please consult us : 1 hr 30 mins standby time, remote batteries, other voltages Dimensions of fixing accessories (see page 36-37) Installation and connection method (see page 38-39) Spare parts (see page 290) Pack

15 21 TECHNICAL DATA Zones : 1 and 2 and Classification : According to CENELEC: Conforming to ATEX - 94/9 EC Directive and standards EN EC 0081 II 2 G: for gas EEx edm II C T4 or T5 to Ta max C horizontal position, lighting facing downwards EC 0081 II 2 D - T = + 85 C : for dust According to IEC: Conforming to IEC standards /1/7/18 Ex edsm II C T4 or T5 to Ta max. +40 C, horizontal position, lighting facing downwards DIP A21 TA = + 85 C Approvals : Approved type FLe CENELEC LCIE 98 ATEX 6004 IEC LCIE Ex declaration of conformity No Conforming to standards EN and IEC for luminaires Conforming to standards EN and IEC combustible dust Conforming to electromagnetic compatibility (EMC) standards - EN EN Protection index : IP 66/67 according to EN and IEC Impact resistance : IK10 according to EN Operating temperature : - 20 C to + 55 C (18/36W) ; - 20 C to + 40 C (58W) Zone 1 & 2-21 & 22 ATEX IEC EC II2 G/D EEx edm IIC T4 or T5 T = 85 C IP 66/67 IK 10 Dimensions (mm) : Standard/through-wiring/pole mounting version : 18 W (220/230 V) 18 W (110/127 V) W (18/36W) Pole mounting version : 258,5 Photometric data (photometry p. G62) polar curves for a 1000 lm flux, according to NF C : longitudinal Luminaire symbol according to NF C transverse (1 x 36 W) Efficiency 89,3 % NF C : 0,81 H + 0,08 T 36 W (2 x 36 W) Efficiency 80,5 % NF C : 0,73 H + 0,07 T Ø (3 x 36 W) Efficiency 68,1 % NF C : 0,63 G + 0,05 T Ø 42 Anticorrosion treatment and climate protection : see page G50 Positive safety : Safety switch for opening luminaire, see glossary Anti-wiring-error connector Dimmable 3-tube operation : Alternate use possible (1, 2 or 3 tubes) controlled by a double switch, available on request (1 x 58 W) Efficiency 87,5 % NF C : 0,80 H + 0,07 T (2 x 58 W) Efficiency 76,9 % NF C : 0,70 H + 0,07 T (3 x 58 W) Efficiency 65,6 % NF C : 0,61 G + 0,04 T Central tube lit 2 tubes lit 3 tubes lit Fluorescent luminaire on Fluorescent luminaire off Emergency function 2 tubes Mains power on Mains power off Emergency function 3 tubes Fluorescent luminaire on Fluorescent luminaire off Mains power on Mains power off Product features/customer benefits - Automatic switch-off function for mains supply and battery : maintainability in hazardous locations - Positive safety switch : Safety Plus - Multi-parabolic reflector : increased efficiency - Ballast with plug in connectors : rapid error-free maintenance - Battery with plug in connectors : rapid error-free maintenance - Opening system automatically protected : no over turning possible - Standard 3-tube : increased intensity, fewer units required - 3-tube dimmable : alternate use of the tubes with a double switch, flexibility of use Data sheet available on request

16 22 110/127 V and 220/240 V normal and emergency bi-pin fluorescent luminaires for armoured cable increased safety Fluo 2 x 58 W Fluo 2 x 36 W Charge indicating light Fluo 2 x 18 W 18, 36 and 58 W fluorescent luminaires for normal and emergency lighting Ø 26 mm bi-pin tubes, standard G13 lampholders Frequency : 50/60 Hz Common power supply circuit to provide both normal lighting and emergency lighting Power supply via high frequency electronic ballast depending on version : 110/127 V ± 10% AC/DC or 220/240 V~ ± 10%, 198 to 264 V Instant start - Power factor 0.95 Battery voltage : 18 W : 6 V 4 Ah - 36/58W : 8.4 V 4 Ah Pre-impregnated fibre glass reinforced polyester body Polycarbonate multi-parabolic hinged reflector Polycarbonate diffuser hinged to body High temperature internal wiring Elastomer gasket Anti-vibration lampholders with spring system Operation : mains power switched on : 2 or 3 tubes lit, mains power switched off : 1 tube lit (battery backup) Power supply to the unit (mains supply and battery) cut off by two positive safety switches which operate when diffuser is opened, for replacing tubes with mains power switched on Green LED on when the installation is operating normally and off in the event of a mains power supply failure or battery fault Battery-backed tube identified with green mark Battery pack easily interchangeable on site, fixed by screws and equipped with a fast plug in connector Ballast and converter fixed by screws, equipped with a fast connector Open and close using an Allen key or flat screwdriver (system automatically protects against over turning) Standard version with earthing plate for armoured cable Two M 20 threaded cable entries with earth continuity plate at one end (cable gland not supplied) One clearence hole for M20 cable gland at the opposite end Supplied with : Two M 20 blanking plugs and one M20 locknut Equipped with an IP 2 X terminal strip cover for maintenance of battery, ballast and lampholders with mains power switched on 18W version: one 4 x 4 mm 2 flexible or 4 x 6 mm 2 rigid connection terminal block max. including one earth terminal 36/58 W version: one 2 x 4 x 4 mm 2 flexible or 2 x 4 x 6mm 2 rigid connection terminal block max. including 2 earth terminals Tube (W) 1 tube Light Weight Volume Cat. No. Cat. No. Pack (not supplied) standby time intensity (Kg) (dm 3 ) 110/127 V 220/240 V 2 x 18 3 h 29 % x 18 3 h 29 % x 36 3 h 16 % x 58 3 h 11 % x 36 3 h 16 % x 58 3 h 11 % Fixing accessories Cat. No. Set of 2 half clamps for fixing to Ø 49 mm (1 1/2) or Ø 42 mm (1 1/4) tube For fixing to Ø 60 mm (2 ) tube: Set of 2 zinc-plated steel M8 ring bolts for suspending the unit Set of 2 aluminium brackets for fixing unit to flat surface. 316 stainless steel version Set of 2 aluminium hinged brackets for adjusting direction of luminaire when wall-mounted. 316 stainless steel version Set of 2 zinc-plated steel brackets for quick fixing with one hand 316 stainless steel version Fall prevention fixing kit (1.20 m stainless steel chain) for M20 cable entry NEW For special options, please consult us: 1.5 hour emergency duration Remote batteries Other voltages Emergency unit only Special protection of the diffuser against severe chemical attack Lens fall prevention fixing kit Dimensions of fixing accessories (see page 36-37) Installation and connection method (see page 38-39) Spare parts (see page 290) Cable glands for armoured cable (see pages ) Pack Part number in bold : fast moving references

17 23 TECHNICAL DATA Zones : 1 and 2 and Classification : According to CENELEC : Conforming to ATEX - 94/9 EC Directive and standards EN EC 0081 II 2 G: for gas EEx edm II C T4 or T5 to Ta max C horizontal position, lighting facing downwards EC 0081 II 2 D - T = + 85 C : for dust According to IEC : Conforming to IEC standards /1/7 Ex edsm II C T4 or T5 to Ta max C horizontal position, lighting facing downwards DIP A21 TA = + 85 C Approvals : Approved type FLe CENELEC LCIE 98 ATEX 6004 IEC LCIE Ex declaration of conformity No Conforming to standards EN and IEC for luminaires Conforming to standards EN and IEC combustible dust Conforming to electromagnetic compatibility (EMC) standards - EN EN Zone 1 & 2-21 & 22 ATEX IEC EC II2 G/D EEx edm IIC T4 or T5 T = + 85 C IP 66/67 IK 10 Dimensions (mm) : Standard version 18 W (220/230 V) 18 W (110/127 V) W W Photometric data (photometry p. G62) polar curves for a 1000 lm flux, according to NF C : longitudinal Luminaire symbol according to NF C transverse (1 x 36 W) Efficiencyt 89,3 % NF C : 0,81 H + 0,08 T (2 x 36 W) Efficiency 80,5 % NF C : 0,73 H + 0,07 T (3 x 36 W) Efficiency 68,1 % NF C : 0,63 G + 0,05 T Protection index : IP 66/67 according to EN and IEC Impact resistance : IK10 according to EN Operating temperature : - 20 C to + 55 C (18/36W) ; - 20 C to + 40 C (58W) Anticorrosion treatment and climate protection : Page : G50 (1 x 58 W) Efficiency 87,5 % NF C : 0,80 H + 0,07 T (2 x 58 W) Efficiency 76,9 % NF C : 0,70 H + 0,07 T (3 x 58 W) Efficiency 65,6 % NF C : 0,61 G + 0,04 T Positive Safety Plus : Safety switch for opening luminaire, see glossary Anti-wiring-error connector Dimmable 3-tube operation : Alternate use possible (1, 2 or 3 tubes) controlled by a double switch, available on request Central tube lit 2 tubes lit 3 tubes lit Fluorescent luminaire on Fluorescent luminaire off Emergency function 2 tubes Mains power on Mains power off Emergency function 3 tubes Fluorescent luminaire on Fluorescent luminaire off Mains power on Mains power off Product features/customer benefits - Automatic switch-off function for mains supply and battery : maintenance in hazardous areas - Positive safety switch : Safety Plus - Multi-parabolic reflector : increased efficiency - Ballast with plug in connectors : rapid error-free maintenance - Battery with connectors : rapid error-free maintenance - Opening system automatically protected : no over turning possible - Standard 3-tube : increased intensity, fewer units required - 3-tube dimmable : alternate use of the tubes with a double switch, flexibility of use Data sheet available on request

18 24 110/127 V or 220/240 V single phase loop in loop out connection and through wiring normal-emergency for armoured cable increased safety Fluo 2 x 58 W Fluo 2 x 36 W Fluo 2 x 18 W 18, 36 and 58 W fluorescent luminaire for normal and emergency lighting Ø 26 mm bi-pin tubes, standard G13 lampholders Designed for single phase mains supplies with a choice of possible installation methods: terminal position, connection and through wiring Frequency : 50/60 Hz Common power supply circuit to provide both normal lighting and emergency lighting Power supply via high frequency electronic ballast depending on the version : 110/127 V ± 10% AC/DC or 220/240 V~ ± 10%, 198 to 264 V Instant start - Power factor 0.95 Battery voltage : 18 W : 6 V 4 Ah - 36/58W : 8.4 V 4 Ah Pre-impregnated fibre glass reinforced polyester body Polycarbonate multi-parabolic hinged reflector Polycarbonate diffuser hinged to body High temperature internal wiring Elastomer gasket Anti-vibration lampholders with spring system Operation: mains power switched on : 2 tubes lit mains power switched off : 1 tube lit (battery backup) Power supply to the unit (mains supply and battery) cut off by two positive safety switches, which operate when diffuser is opened, for replacing tubes with mains power switched on Green LED on when the installation is operating normally and off in the event of a mains power supply failure or a battery fault Battery-backed tube identified with green mark Open and close using an Allen key or flat screwdriver (system automatically protects against over turning) Battery pack easily interchangeable on site, fixed by screws and equipped with a fast plug in connector Ballast and converter fixed by screws, equipped with a fast connector 36/58 W equipped with an IP 2 X terminal strip cover for maintenance of battery, ballast and lampholders with mains power switched on 18W maintenance of the tubes with the mains power switched on, maintenance of the battery, ballast and lampholders with the mains power absent. Three threaded cable entries with earthing plates for M20 cable gland (not supplied) for armoured cable Supplied with: Two M20 blanking plugs 18 W : 4 X 4 mm 2 flexible or 8 x 6 mm 2 rigid connection terminal block max. including one earth terminal at one end One 4 x 4 mm 2 flexible or 4 x 6 mm 2 rigid loop in loop out terminal block including one earth terminal at the other end Catalogue numbers Tube (W) 1 tube Light Weight Volume Cat. No. Cat. No. Pack (not supplied) standby time intensity (Kg) (dm 3 ) 110/127 V 220/240 V 2 x 18 3 h 29% x 18 3 h 29% (*) 1 2 x 36 3 h 16 % x 58 3 h 11 % (*) reference possible installation methods : - terminal position and connection : YES - through wiring : NO Fixing accessories Charge indicating light Cat. No. Set of 2 half clamps for fixing to Ø 49 mm (1 1/2) or Ø 42 mm (1 1/4) tube For fixing to Ø 60 mm (2 ) tube: Set of 2 zinc-plated steel M8 ring bolts for suspending the unit Set of 2 aluminium brackets for fixing unit to flat surface 316 stainless steel version Set of 2 aluminium hinged brackets for adjusting the direction of the luminaire when wall-mounted 316 stainless steel version Set of 2 zinc-plated steel brackets for quick fixing with one hand 316 stainless steel version Fall prevention fixing kit (1.20 m stainless steel chain) for M20 cable entry NEW For special options, please consult us : 1,5 hour emergency duration Remote battery Other voltages Lens fall prevention fixing kit Dimensions of fixing accessories (see page 36-37) Installation and connection method (see page 38-39) Spare parts (see page 290) Cable glands for armoured cable (see pages ) Pack Part number in bold : fast moving references

19 25 TECHNICAL DATA Zones : 1 and 2 and Classification : According to CENELEC : Conforming to ATEX - 94/9 EC Directive and standards EN EC 0081 II 2 G : for gas EEx edm II C T4 or T5 to Ta max C horizontal position, lighting facing downwards EC 0081 II 2 D - T = + 85 C : for dust According to IEC : Conforming to IEC standards /1/7 Ex edsm II C T4 or T5 to Ta max C horizontal position, lighting facing downwards DIP A21 TA = + 85 C Approvals : Approved type FLe CENELEC LCIE 98 ATEX 6004 IEC LCIE Ex declaration of conformity No Conforming to standards EN and IEC for luminaires Conforming to standards EN and IEC combustible dust Conforming to electromagnetic compatibility (EMC) standards - EN EN Protection index : IP 66/67 according to EN and IEC Impact resistance : IK10 according to EN Operating temperature : - 20 C to + 55 C (18/36 W) ; - 20 C to + 40 C (58 W) Anticorrosion treatment and climate protection : see page G50 Zone 1 & 2-21 & 22 ATEX IEC EC II2 G/D EEx edm IIC T4 or T5 T = 85 C IP 66/67 IK 10 Dimensions (mm) : Single phase loop in loop out connection/through wiring version 18 W (220/230 V) 18 W (110/127 V) W W Photometric data (photometry p. G62) polar curves for a 1000 lm flux, according to NF C : longitudinal Luminaire symbol according to NF C transverse (2 x 18 W) Efficiency 85,1 % NF C : 0,78 H + 0,08 T Positive Safety Plus : Safety switch for opening luminaire, see glossary Anti-wiring-error connector (2 x 36 W) Efficiency 80,5 % NF C : 0,73 H + 0,07 T Emergency function 2 tubes Mains power switched on Mains power switched on Fluorescent luminaire on Fluorescent luminaire off (2 x 58 W) Efficiency 76,9 % NF C : 0,70 H + 0,07 T Product features/customer benefits - Automatic switch-off function for mains supply and battery : maintenance in hazardous areas - Positive safety switch : Safety Plus - Multi-parabolic reflector : increased efficiency - Ballast with plug in connectors : rapid error-free maintenance - Battery with plug in connectors : rapid error-free maintenance - Opening system automatically protected : no over turning possible Data sheet available on request

20 26 220/240 V AC or 110 V DC normal and emergency bi-pin luminaires for central source for armoured and non-armoured cable increased safety Fluo 2 x 36W Fluo 2 x 18W 18 and 36 W fluorescent luminaires Ø 26 mm bi-pin tubes, standard G 13 lampholders Power supply via high frequency ballast for alternate use: in normal mode: 220/240 V~ ± 10%, 198 to 264 V 50/60 Hz in battery back up mode 3 hours maximum: 110 V DC on remote battery powered by the mains supply Pre-impregnated fibre glass reinforced polyester body Polycarbonate diffuser hinged to body Polycarbonate multi-parabolic hinged reflector High temperature internal wiring Elastomer gasket Anti-vibration lampholders with spring system Power supply to the unit cut off by positive safety switch which operates when diffuser is opened, for replacing tubes with mains power switched on If one tube fails, the other tube remains lit. Open and close using an Allen key or flat screwdriver (system automatically protects against over turning) IP 2X terminal strip cover for maintaining the ballast and lampholders without cutting off the mains power supply Ballast fixed by screws, equipped with a fast connector Standard twin version for non-armoured cable Three threaded cable entries, 2 at one end and the third at the opposite end for M25 cable gland. Supplied with: One M25 polyamide cable gland (sealed Ø 8 to 18.5 mm) Two M25 blanking plugs One 5 x 4 mm 2 max. flexible or 5 x 6 mm 2 max. rigid connection terminal block Tube (W) Light Weight Volume Cat. No. Pack not supplied output (Kg) (dm 3 ) 220/240 V 2 x % x % Standard twin version for armoured cable Two M20 threaded cable entries with earth continuity plate for cable gland (not supplied) for armoured cable at one end One clearence hole for M20 cable gland at the opposite end Supplied with: Two M20 blanking plugs and one M20 locknut One 5 x 4 mm 2 max. flexible or 5 x 6 mm 2 max. rigid connection terminal block Tube (W) Light Weight Volume Cat. No. Pack not supplied output (Kg) (dm 3 ) 220/240V 2 x % x % Fixing accessories Cat. No. Set of 2 half clamps for fixing to Ø 49 mm (1 1/2) or Ø 42 mm (1 1/4) tube For fixing to Ø 60 mm (2 ) tube Set of 2 zinc-plated steel M8 ring bolts for suspending the unit Set of 2 aluminium brackets for fixing unit to flat surface. 316 stainless steel version Set of 2 aluminium hinged brackets for adjusting direction of luminaire when wall-mounted. 316 stainless steel version Set of 2 zinc-plated steel brackets for quick fixing 316 stainless steel version Fall prevention fixing kit (1.20 m chain) for M20 cable entry Fall prevention fixing sling (1.20 m stainless steel chain) for M25 cable entry NEW For special options, please consult us : Through wiring and pole mounting versions Single tube and Fa6 tube versions Ø 38 mm bi-pin tubes Ø 38 mm bi-pin tubes specially designed for low temperatures Special protection of the diffuser against severe chemical attack Lens fall prevention fixing kit Dimensions of fixing accessories (see page 36-37) Installation and connection method (see page 38-39) Spare parts (see page 290) Cable glands for armoured cable (see pages ) Pack Part number in bold : fast moving references

21 27 TECHNICAL DATA Zones : 1 and 2 and Classification : According to CENELEC: Conforming to ATEX - 94/9 EC Directive and standards EN EC 0081 II 2 G : for gas EEx ed II C T4 or T5 to Ta max C horizontal position, lighting facing downwards. EC 0081 II 2 D T = + 85 C : for dust According to IEC : Conforming to IEC standards /1/7 Ex eds II C T4 or T5 to Ta max C horizontal position, lighting facing downwards. DIP A21 TA = + 85 C Approvals : Approved type Fle CENELEC LCIE 98 ATEX 6004 IEC LCIE Ex declaration of conformity No Conforming to standards EN and IEC for luminaires Conforming to EN and IEC combustible dust Conforming to electromagnetic compatibility (EMC) standards - EN EN Zone 1 & 2-21 & 22 ATEX IEC EC II2 G/D EEx ed IIC T4 or T5 T = 85 C IP 66/67 IK 10 Dimensions (mm) : W 18 W , Ø 42 Photometric data (photometry p. G62) polar curves for a 1000 lm flux, according to NF C : longitudinal Luminaire symbol according to NF C transverse (2 x 18 W) Efficiency 85,1 % NF C : 0,78 H + 0,08 T 50 Ø 42 Protection index : IP 66/67 according to EN and IEC Impact resistance : IK10 according to EN Operating temperature : - 20 C to + 55 C Anticorrosion treatment and climate protection : see page G50 Positive safety : Safety switch for opening luminaire, see glossary Anti-wiring-error connector (2 x 36 W) Efficiency 80,5 % NF C : 0,73 H + 0,07 T Product features/customer benefits - Positive safety switch : Safety Plus - Multi-parabolic reflector : increased efficiency - Ballast with plug in connectors : rapid error-free maintenance - Opening system automatically protected : no over turning possible Data sheet available on request

22 28 230/240 V self-test normal and emergency bi-pin fluorescent luminaires for non-armoured cable increased safety Memory Fluo 2 x 36W Fluo 2 x 58W Beep Beep Beep Visible and audible fault signal Fluo 2 x 18W 18, 36 and 58 W auto-test fluorescent luminaires for normal and emergency lighting Ø 26 mm mono and bi-pin tubes, standard G13 lampholders Frequency: 50/60 Hz Common power supply circuit to provide both normal lighting and emergency lighting Power supply via high frequency ballast 230/240 V~ ± 6%; 216 to 256 V~ Instant start - Power factor 0.96 Battery voltage : 18W, 36W and 58W - 6V Pre-impregnated fibre glass reinforced polyester body Polycarbonate multi-parabolic hinged reflector Polycarbonate diffuser hinged to body High temperature internal wiring Elastomer gasket Anti-vibration lampholders with spring system Power supply to the unit (mains supply and battery) cut off by two positive safety switches which operate when diffuser is opened, for replacing tubes with mains power switched on Operation : mains power switched on : 2 tubes lit mains power switched off : 1 tube lit (battery backed) Automatic tests controlled by microprocessor: monthly : discharge for 5 minutes 6-monthly : discharge for 1 hour annual : discharge for 3 hours with indication (upon request) of the number of months remaining before the next test In the event of a fault: LED flashes Buzzer emits 3 long beeps every 35 minutes until the repair is carried out Battery-backed tube identified with green mark Open and close using an Allen key or flat screwdriver (system automatically protects against over turning) battery pack easily interchangeable on site, fixed by screws and equipped with a fast connector Ballast and converter fixed by screws, equipped with a fast connector Standard twin version for non-armoured cable Supplied with : One M25 polyamide cable gland (sealed Ø: 8 to 18.5mm) Two M25 blanking plugs 18W version : one 4 x 4 mm 2 flexible or 4 x 6 mm 2 rigid connection terminal block max. including one earth terminal 36/58 W version: one 2 x 4 x 4 mm 2 flexible or 2 x 4 x 6mm 2 rigid connection terminal block max. including 2 earth terminals Tube (W) 1 tube Light Weight Volume Cat. No Pack not supplied standby intensity (kg) (dm 3 ) 230/240 V 2 x 18 3 h 24 % x 36 3 h 16 % x 58 3 h 15 % Fixing accessories Cat. No. Set of 2 half clamps for fixing to Ø 49mm (1 1/2) or Ø 42mm (1 1/4) tube For fixing to Ø 60 mm (2 ) tube Set of 2 zinc-plated steel M8 ring bolts for suspending the unit Set of 2 aluminium brackets for fixing unit to flat surface. 316 stainless steel version Set of 2 aluminium hinged brackets for adjusting direction of luminaire when wall-mounted stainless steel version Set of 2 zinc-plated steel brackets for quick fixing with one hand 316 stainless steel version Fall prevention fixing kit (1.20 m stainless steel chain) for M25 cable entry NEW For special options, please consult us : Other voltages Ø 38 mm bi-pin tubes Ø 38 mm bi-pin tubes specially designed for low temperatures Special protection of the diffuser against severe chemical attack Lens fall prevention fixing kit Dimensions of fixing accessories (see page 36-37) Installation and connection method (see page 38-39) Spare parts (see page 290) Pack Part number in bold : fast moving references

23 Zone 1 & 2-21 & 22 ATEX IEC EC II2 G/D EEx ed IIC or IIB T4 or T5 T = 85 C IP 66/67 IK 10 TECHNICAL DATA Zones : 1 and 2 and Classification: According to CENELEC: Conforming to ATEX - 94/9 EC Directive and standards EN EC 0081 II 2 G : for gas EEx ed IIC* T4 or T5 to Ta max C horizontal position, lighting facing downwards. EC 0081 II 2 D T = + 85 C : for dust According to IEC: Conforming to IEC standards /1/7 Ex eds IIC* T4 or T5 to Ta max C horizontal position, lighting facing downwards. DIP A21 TA = + 85 C * IIB with external buzzer Approvals : Approved type Fle CENELEC LCIE 98 ATEX 6004 IEC LCIE Ex declaration of conformity No Conforming to standards EN and IEC for luminaires Conforming to EN and IEC combustible dust Conforming to electromagnetic compatibility (EMC) standards - EN EN Protection index : IP 66/67 according to EN and IEC Impact resistance : IK10 according to EN Operating temperature : - 20 C to + 55 C (18/36 W) ; -20 C to + 40 C (58 W) Dimensions (mm) : 18 W (2 x 18 W) Efficiency 85,1 % NF C : 0,78 H + 0,08 T 58 W 36 W (2 x 36 W) Efficiency 80,5 % NF C : 0,73 H + 0,07 T Product features/customer benefits (2 x 58 W) Efficiency 76,9 % NF C : 0,70 H + 0,07 T - Positive safety switch : Safety Plus - Multi-parabolic reflector : increased efficiency - Ballast with plug in connectors : rapid error-free maintenance - Battery with connectors : rapid error-free maintenance - Opening system automatically protected : no over turning possible - Automatic tests with alarm and memory : easy maintenance NORMAL AND EMERGENCY BI-PIN FLUORESCENT LUMINAIRES Self-test with integrated alarm and memory visual indication Beep Beep Beep External audible indication Memory Mémorisation of tests Easy maintenance ATX : Safety Plus The LED indicates: - Charging status of battery and charger - Presence of mains power - State of the lamps - 3 long beeps every 35 min until the fault is repaired - 1 beep each time the unit is switched on confirms the unit is in good working order. 29 The microprocessor indicates the number of months remaining before the next annual 3-hour discharge test. - On-site maintenance - Plug-in with connector - Quick fixing - Integrated battery Battery discharge tests: 5-minute monthly test, 1-hour halfyear test, 3-hour yearly test. Results of the tests : LED on with steady light > battery present, charged > satisfactory charging current > mains supply present and connected. LED flashing > lamp fault. LED off > battery fault > no mains supply

24 30 110/127 V - 220/240 V mono-pin fluorescent luminaires for armoured or non-armoured cable increased safety Fluo 2 x 58W Fluo 2 x 36W Adaptator for Fa8 tube on Fa6 lampholder Fluo 2 x 18W 18/20, 36/40 and 58/65W fluorescent luminaires Ø 38 mm (20, 40 and 65 W) and Ø 26 mm (20, 36 and 58 W) mono-pin tubes with Fa 6 lampholders according to IEC Power supply via high frequency ballast depending on version : 99 to 140 V 110/127 V ± 10% AC/DC or 220/240 V~ ± 10%, 198 to 264 V Frequency: 50/60 Hz Instant start. Power factor 0.95 Pre-impregnated fibre glass reinforced polyester body Polycarbonate multi-parabolic hinged reflector Polycarbonate diffuser hinged to body Elastomer gasket High temperature internal wiring Anti-vibration lampholders with spring system Separate operation of the tubes: if one tube fails, the other tube remains lit Power supply to the unit cut off by positive safety switch which operates when diffuser is opened, for replacing tubes with mains power switched on Open and close using an Allen key or flat screwdriver (system automatically protects against over turning) IP 2X terminal strip cover for maintaining the ballast and lampholders without cutting off the main power supply Ballast fixed by screws, equipped with a fast connector Standard version for non-armoured cable Three threaded cable entries, 2 at one end and the third at the opposite end for M25 cable gland. Supplied with: One M25 polyamide cable gland (sealed Ø: 8 to 18.5 mm) Two M25 blanking plugs One 5 x 4 mm 2 flexible or 5 x 6mm 2 rigid connection terminal block maximum. Tube (W) Weight Volume Cat. No. Cat No. Pack not supplied (Kg) (dm 3 ) 110/127 V 220/240 V 2 x 18/ x 18/ x 36/ x 58/ Part number in bold : fast moving references Standard version for armoured cable Two M20 threaded cable entries with earth continuity plate for armoured cables at one end (cable gland not supplied) One clearance hole for M20 cable gland at the opposite end. Supplied with : Two blanking plugs and one M20 locknut One 5 x 4 mm 2 max. flexible or 5 x 6 mm 2 max. rigid connection terminal block Tube (W) Weight Volume Cat. No. Cat No. Pack not supplied (Kg) (dm 3 ) 110/127 V 220/240 V 2 x 18/ x 18/ x 36/ x 58/ Fixing accessories Cat. No. Set of 2 half clamps for fixing to Ø 49 mm (1 1/2) or Ø 42 mm (1 1/4) tube For fixing to Ø 60 mm (2 ) tube : Set of 2 zinc-plated steel M8 ring bolts for suspending the unit Set of 2 aluminium brackets for fixing on flat surface. 316 stainless steel version Set of 2 aluminium hinged brackets for adjusting direction of luminaire when wall-mounted. 316 stainless steel version Set of 2 zinc-plated steel brackets quick fixing with one hand 316 stainless steel version Fall prevention fixing kit (1.20 m stainless steel chain) for M20 cable entry Fall prevention fixing kit (1.20 m stainless steel chain) for M25 cable entry NEW Adaptor for Fa8 tube on Fa 6 lampholders For special options, please consult us: Electronic ballast 254 V 50/60 Hz + 6% - 10% Pole mounting and through wiring versions Single version (1 x 18 W - 1 x 36 W - 1 x 58 W) Special protection of the diffuser against severe chemical attack Lens fall prevention fixing kit Dimensions of fixing accessories (see page 36-37) Installation and connection method (see page 38-39) Spare parts (see page 290) Cable glands for armoured cable (see pages ) Pack

25 31 TECHNICAL DATA Zones : 1 and 2, and Classification : According to CENELEC : Conforming to ATEX - 94/9 EC directive and standards NP EN EC 0081 II 2 G: for gas EEx ed II C T4 or T5 to Ta max C horizontal position, lighting facing downwards EC 0081 II 2 D - T = + 85 C : for dust According to IEC : Conforming to IEC standards /1/7 Ex ed II C T4 or T5 to Ta max C horizontal position, lighting facing downwards DIP A21 TA = + 85 C Approvals : Approved type Fle CENELEC LCIE 98 ATEX 6004 IEC LCIE Ex declaration of conformity No Conforming to standards EN and IEC for luminaires Conforming to EN and IEC combustible dust Conforming to electromagnetic compatibility (EMC) standards EN EN Zone 1 & 2-21 & 22 ATEX IEC EC II2 G/D EEx ed IIC T4 or T5 T = 85 C IP 66/67 IK 10 Dimensions (mm) : 18 W 36 W W Photometric data (photometry p. G62) polar curves for a 1000 lm flux, according to NF C : longitudinal Luminaire symbol according to NF C transverse (2 x 18 W) Efficiency 85,1 % NF C : 0,78 H + 0,08 T Protection index : IP 66/67 according to EN and IEC Impact resistance: IK10 according to EN Operating temperature : - 20 C to + 55 C Anticorrosion treatment and climate protection : see page G50 Positive safety : Safety switch for opening luminaire, see glossary Anti-wiring-error connector (2 x 36 W) Efficiency 80,5 % NF C : 0,73 H + 0,07 T (2 x 58 W) Efficiency 76,9 % NF C : 0,70 H + 0,07 T Product features/customer benefits - Positive safety switch: Safety Plus - Multi-parabolic reflector: increased efficiency - Ballast with plug in connectors: rapid error-free maintenance - Opening system automatically protected : no over turning possible Data sheet available on request

26 32 220/240 V normal and emergency mono-pin fluorescent luminaires for armoured or non-armoured cable increased safety Fluo 2 x 58W Fluo 2 x 36W Charge indicating light Fluo 2 x 18W 18/20, 36/40 and 58/65W fluorescent luminaires Ø 38 mm (20, 40 and 65 W) and Ø 26 mm (18, 36 and 58 W) mono-pin tubes with Fa 6 lampholder according to IEC Frequency : 50/60 Hz Power supply : high frequency ballast 220/240V~ (+ 6%, - 10%) 198 to 264 V Instant start. Power factor 0.95 Battery voltage: 18W 6V 4A h - 36/58W 8.4V 4A h Pre-impregnated fibre glass reinforced polyester body Polycarbonate multi-parabolic hinged reflector Polycarbonate diffuser hinged to body High temperature internal wiring Elastomer gasket Anti-vibration lampholder with spring system Common power supply circuit to provide both normal lighting and emergency lighting Operation : mains power switched on, 2 tubes lit mains power switched off, 1 tube lit (battery backed) Power supply to the unit (mains supply and battery) cut off by two positive safety switches which operate when diffuser is opened, for replacing tubes with mains power switched on Green LED on when the installation is operating normally and off if there is a mains power supply failure or a battery fault Battery-back up tube identified with green mark Battery pack easily interchangeable on site, fixed by screws and equipped with a fast connector Ballast and converter fixed by screws, equipped with a fast connector Open and close using an Allen key or flat screwdriver (system automatically protects against over turning) Equipped with an IP 2 X terminal strip cover for maintenance of battery, ballast and lampholders with mains power switched on 18W version: one 4 x 4 mm 2 flexible or 4 x 6 mm 2 rigid connection terminal block max. including one earth terminal 36/58 W version: one 2 x 4 x 4 mm 2 flexible or 2 x 4 x 6mm 2 rigid connection terminal block max. including 2 earth terminals Standard version for non-armoured cable Three threaded cble entries for M25 cable glands. Supplied with: One M25 polyamide cable gland (sealed Ø: 8 to 18.5mm) Two M25 blanking plugs Tube (W) 1 tube Light Weight Volume Cat. No. Pack not supplied standby time output (Kg) (dm 3 ) 220/240V 2 x 18/20 3 h 29 % x 36/40 3 h 16 % x 58/65 3 h 11 % Standard version with earthing plate for armoured cable Two M20 threaded cable entries with earth continuity plate at one end (cable gland not supplied) One clearance hole for M20 cable gland at the opposite end Supplied with: Two M20 blanking plugs and one M20 locknut Tube (W) 1 tube Light Weight Volume Cat. No. Pack not supplied standby time output (Kg) (dm 3 ) 220/240 V 2 x 18/20 3 hrs 29% x 36/40 3 hrs 16% x 58/65 3 hrs 11% Fixing accessories Cat. No. Set of 2 half clamps for fixing to Ø 49 mm (1 1/2) or Ø 42 mm (1 1/4) tube For fixing to Ø 60 mm (2 ) tube Set of 2 zinc-plated steel M8 ring bolts for suspending the unit Set of 2 aluminium brackets for fixing unit on flat surface. 316 stainless steel version Set of 2 aluminium hinged brackets for adjusting direction of luminaire when wall-mounted. 316 stainless steel version Set of 2 zinc-plated steel brackets for quick fixing with one hand 316 stainless steel version Fall prevention fixing kit (1.20 m stainless steel chain) for M20 cable entry Fall prevention fixing kit (1.20 m stainless steel chain) for M25 cable entry NEW Adaptor for Fa8 tube For special options, please consult us: 1,5 hour emergency duration External battery Other voltages Special protection of the diffuser against severe chemical attack Lens fall prevention fixing kit Dimensions of fixing accessories (see page 36-37) Installation and connection method (see page 38-39) Spare parts (see page 290 ) Cable glands for armoured cable (see pages ) Pack Part number in bold : fast moving references

27 33 TECHNICAL DATA Zones : 1 and 2, and Classification : According to CENELEC : Conforming to ATEX - 94/9 EC Directive and standards EN EC 0081 II 2 G : for gas EEx edm II C T4 or T5 to Ta max C horizontal position, lighting facing downwards. EC 0081 II 2 D - T = + 85 C : for dust According to IEC : Conforming to IEC standards /1/7/18 Ex edm II C T4 or T5 to Ta max C horizontal position, lighting facing downwards. DIP A21 TA = + 85 C Approvals : Approved type Fle CENELEC LCIE 98 ATEX 6004 IEC LCIE Ex declaration of conformity No Conforming to standards EN and IEC for luminaires Conforming to standards EN and IEC combustible dust Conforming to electromagnetic compatibility (EMC) standards EN and EN Zone 1 & 2-21 & 22 ATEX IEC EC II2 G/D EEx edm IIC T4 or T5 T = 85 C IP 66/67 IK 10 Dimensions (mm) : Standard/through-wiring version 18 W 36 W W Photometric data (photometry p. G62) polar curves for a 1000 lm flux, according to NF C : longitudinal Luminaire symbol according to NF C transverse (2 x 18 W) Efficiency 85,1 % NF C : 0,78 H + 0,08 T Protection index : IP 66/67 according to EN and IEC Impact resistance : IK10 according to EN Operating temperature : 20 C to + 55 C Anticorrosion treatment and climate protection : see page G50 Positive safety : Safety switch for opening contacts Anti-wiring-error connector (2 x 36 W) Efficiency 80,5 % NF C : 0,73 H + 0,07 T (2 x 58 W) Efficiency 76,9 % NF C : 0,70 H + 0,07 T Product features/customer benefits - Positive safety switch: Safety Plus - Multi-parabolic reflector: increased efficiency - Ballast with plug in connectors: rapid error-free maintenance - Ballast with connectors: rapid error-free maintenance - System automatically protected : no over turning possible Data sheet available on request

28 34 110/127 V - 220/240 V level gauge light fitting for non-armoured cable increased safety level gauge light fitting 1 x 36W Installation in vertical position 18, 36 and 58 W level gauge light fitting Ø 26 mm tube, standard G13 caps Frequency : 50/60 Hz Power supply via high frequency ballast according to model: 110/127 V ± 10% AC/DC or 220/240 V~ ± 10%, 198 to 264 V Instant start. Power factor 0.95 Pre-impregnated fibre glass reinforced polyester body Polycarbonate diffuser hinged to body Lighting concentrated on level indicator High temperature internal wiring Elastomer gasket Anti-vibration lampholders with spring system Power supply to the unit cut off by positive safety switch which operates when diffuser is opened, for replacing tube with mains power switched on Open and close using an Allen key or flat screwdriver (system automatically protects against over turning) IP 2X terminal strip cover for maintaining the ballast and lampholders without cutting off the main power supply Ballast fixed by screws, equipped with a fast connector Level gauge light version Three threaded cable entries, 2 at one end and the third at the opposite end for M25 cable gland. Supplied with : One M25 polyamide cable gland (sealed Ø 8 to 18.5 mm) Two M25 blanking plugs One 5 x 4 mm 2 max. flexible or 5 x 6 mm 2 max. rigid connection terminal block Fixing accessories Cat. No. Set of 2 half clamps for fixing to Ø 49 mm (1 1/2) or Ø 42 mm (1 1/4) tube For fixing to Ø 60 mm (2 ) tube Set of 2 aluminium brackets for fixing unit to flat surface 316 stainless steel version Set of 2 aluminium hinged brackets for adjusting direction of luminaire when wall-mounted. 316 stainless steel version Set of 2 zinc-plated steel brackets for quick fixing with one hand 316 stainless steel version NEW For special options, please consult us: Ø 38 mm standard or bi-pin tubes specially designed for low temperatures Special protection of the diffuser against severe chemical attack Dimensions of fixing accessories (see page 36-37) Installation and connection method (see page 38-39) Spare parts (see page 290) Timer switch (see page 211) Pack Tube (W) Weight Volume Cat. No. Cat No. Pack not supplied (Kg) (dm 3 ) 110/127 V 220/240 V 1 x x x Part number in bold : fast moving references

29 35 TECHNICAL DATA Zones : 1 and 2 and Classification : According to CENELEC: Conforming to ATEX - 94/9 EC Directive and standards EN EC 0081 II 2 G : for gas EEx ed II C T4 EC 0081 II 2 D - T = + 85 C: for dust According to IEC : Conforming to IEC standards /1/7 Ex ed II C T4 DIP A21 TA = + 85 C Approvals : Approved type Fle CENELEC LCIE 98 ATEX 6004 IEC LCIE Ex declaration of conformity No Conforming to standards EN and IEC for luminaires Conforming to standards EN and IEC combustible dust Conforming to electromagnetic compatibility (EMC) standards - EN EN Protection index : IP 66/67 according to EN and IEC Impact resistance : IK10 according to EN Operating temperature : 20 C to + 55 C Anticorrosion treatment and climate protection : see page G50 Zone 1 & 2-21 & 22 ATEX IEC EC II2 G/D EEx ed IIC T4 or T5 T = 85 C IP 66/67 IK 10 Dimensions (mm) : 36W 58W W Positive safety plus : Safety switch for opening luminaire, see glossary Anti-wiring-error connector Installation Gauge Tank Product features/customer benefits - Positive safety switch : Safety Plus - Multi-parabolic reflector : increased efficiency - Ballast with plug in connectors : rapid error-free maintenance - Opening system automatically protected : no over turning possible - Concentrated beam : improved legibility Gauge lit on its full length in normal position of the luminaire Data sheet available on request

30 36 Dimensions of fixing accessories Quick fixing brackets Zinc plated steel or stainless steel Ø Fixing brackets for flat surface (painted aluminium alloy or stainless steel) Set of pole claps (1 1/4 to 2 tube) (zinc-plated steel) Ø pour 1"1/4 / 1"1/ " 1/4 ou 1" 1/2 ou 84 pour 2" Ø 60 2"

31 Ø 42 Dimensions of fixing accessories 37 Set of 2 ring blots (zinc-plated steel) Ø Ø 8 15 M 8x1.25 Set of 2 hinged brackets (painted aluminium alloy or stainless steel) M 8X mm diam galvanized steel wall mounting pole Ø Ø 10.5

110/127 V - 220/240 V BI-PIN HEAVY DUTY LUMINAIRES FOR ARMOURED OR NON-ARMOURED CABLE Fluo 2 x 36 W

110/127 V - 220/240 V BI-PIN HEAVY DUTY LUMINAIRES FOR ARMOURED OR NON-ARMOURED CABLE Fluo 2 x 36 W /27 V - 2/2 V BI-PIN HEAVY DUTY LUMINAIRES FOR ARMOURED OR NON-ARMOURED CABLE 963 39 Fluo 2 x 8 W 963 37 Fluo W 963 36 Fluo 2 x 8 W 8, 36 and 8 W fluorescent luminaires Ø 26 mm bi-pin tubes, standard G3

More information

IIC wellglass luminaires for low energy, halogen and incandescent lamps flameproof

IIC wellglass luminaires for low energy, halogen and incandescent lamps flameproof IIC wellglass luminaires for low energy, halogen and incandescent lamps flameproof Zone 1 & 2-21 & 22 ATEX IEC EC II2G/D IK 08 99 EEx d IIC T6-T5-T4-T3 T = 75 C to 135 C IP 66 0947 36 wellglass luminaire

More information

Lighting: Fluorescent Lighting RE Series: Recessed Fluorescent Lighting Fixtures, Standard and Emergency Back-Up Increased Safety

Lighting: Fluorescent Lighting RE Series: Recessed Fluorescent Lighting Fixtures, Standard and Emergency Back-Up Increased Safety 4 x 18 W Surface Mounting 2 x 36 W Recessed Compliance Data: ATEX IECEx: ATEX IECEx CE Ex de IIC or Ex demb IIC (emergency version) T6 to T4 Ex td A21 T 75 C Technical Data: 18 W 36 W 58 W 1, 2, 3 & 4

More information

Lighting: Fluorescent Lighting FL Series: Light Duty Nonmetallic Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up Zone 2 & 22

Lighting: Fluorescent Lighting FL Series: Light Duty Nonmetallic Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up Zone 2 & 22 FL Series: Light Duty Nonmetallic Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up 2 x 58 W 2 x18 W Compliance Data: ATEX IEC: Zone 2 22 ATEX IEC CE Ex nr II or na II T6 or T5 or T4

More information

Fluorescent Lighting FE Series: Nonmetallic Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up Increased Safety

Fluorescent Lighting FE Series: Nonmetallic Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up Increased Safety Fluorescent Lighting FE Series: Nonmetallic Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up Increased Safety Zone & & II GD IP66/67 IK0 Applications: Can be installed in hazardous

More information

ATX FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety

ATX FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety Applications Can be installed in hazardous areas designated as Zone 1 and 2 21 and 22. For use in locations where a high degree of corrosion resistance is required. For indoor/outdoor use where protection

More information

FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety

FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety : : Applications Can be installed in hazardous areas designated as Zone 1, 2, 21 and 22. For use in locations where a high degree of corrosion resistance is required. For indoor/outdoor use where protection

More information

FL Series Light Duty Nonmetallic Fluorescent Luminaires Standard and Emergency Back-Up. Zone 2 and 22

FL Series Light Duty Nonmetallic Fluorescent Luminaires Standard and Emergency Back-Up. Zone 2 and 22 Standard and Emergency Back-Up. Applications Light duty luminaire ideal for commercial and light industrial locations including hazardous areas designated as Zone 2 or 22 environments. Typical applications

More information

FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety

FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety : : Applications Can be installed in hazardous areas designated as Zone 1 and 2 21 and 22. For use in locations where a high degree of corrosion resistance is required. For indoor/outdoor use where protection

More information

ATX FN Series Heavy Duty Nonmetallic Fluorescent Luminaires Standard and Emergency Back-Up. Zone 2-21 and 22

ATX FN Series Heavy Duty Nonmetallic Fluorescent Luminaires Standard and Emergency Back-Up. Zone 2-21 and 22 Applications Can be installed in hazardous areas designated as Zone 2, 21 and 22. For use in locations where a high degree of corrosion resistance is required. For indoor/outdoor use where protection against

More information

Lighting: Incandescent & HID Lighting PB, PC & PL Series: Floodlights Flameproof

Lighting: Incandescent & HID Lighting PB, PC & PL Series: Floodlights Flameproof Ex de IIB Type PB Ex de IIC Type PC Ex de IIB Type PL Low Temperature Rating Compliances: ATEX - IEC: Zone 1 & 2 21 & 22 ATEX IECEx CE Ex de IIB (PB and PL) T4 to T1 Ex td A21 T130 C to T378 C IP66 (Type

More information

ATX PC Series Floodlights Flameproof. Metal Halide, High Pressure Sodium, Mercury Vapor, Halogen

ATX PC Series Floodlights Flameproof. Metal Halide, High Pressure Sodium, Mercury Vapor, Halogen Applications Designed for large area lighting in industrial outdoor and indoor hazardous areas. Ideal for use in Zones 1 and 2 and 21 and 22 in the oil and gas industry. In locations such as: refineries,

More information

Linear fittings EVS fluorescent fitting with easy disconnect - zones 1, 2, 21 & 22

Linear fittings EVS fluorescent fitting with easy disconnect - zones 1, 2, 21 & 22 ABB DTS LINEAR FITTINGS - EVS FLUORESCENT FITTING - S, 2, 2 & 22 59 EVS fluorescent fitting with easy disconnect - zones, 2, 2 & 22 Features Easy disconnect without wiring to remove the gear tray All components

More information

Compact Emergency Light Fittings Series C-LUX 6108 / 6508

Compact Emergency Light Fittings Series C-LUX 6108 / 6508 > Operating modes non-maintained operation non-maintained operation with switchable emergency light blocking > With continous operating test > For fluorescent lamps 8 W, d 16 mm, for two-pin holder G5

More information

Tubular fittings Tubular fluorescent fitting with automatic switch off XFP - Zones 1, 2 & 21, 22

Tubular fittings Tubular fluorescent fitting with automatic switch off XFP - Zones 1, 2 & 21, 22 Tubular fluorescent fitting with automatic switch off Features Quick and easy insulation switch for safe maintenance Ex e integral junction box All components mounted on sliding gear tray for easy installation

More information

Linear fittings EVDL LED fitting - zones 21, & 22

Linear fittings EVDL LED fitting - zones 21, & 22 ABB DTS LINEAR FITTINGS - EVDL LED FITTING - ZONES 21 & 22 77 Linear fittings EVDL LED fitting - zones 21, & 22 LED Features Operating life up to 100 000 h High lumen output - 5 000 lumens with 100% yield

More information

Linear fittings EVNL LED fitting - zones 2, & 22

Linear fittings EVNL LED fitting - zones 2, & 22 65 Linear fittings EVNL LED fitting - zones 2, & 22 LED Features Operating life up to 100 000 h High lumen output - 5 000 lumens with 100% yield - LED module with diffuser Double central locking for ingress

More information

7 Lighting Technology

7 Lighting Technology 7 Lighting Technology Compact Emergency Light Fittings C-LUX 6108 (Zones 1 & 2, 21 & 22) C-LUX 6508 (Zones 2, 22) 01908E00 Series C-LUX 6108 and 6508 compact emergency lighting fitting can be used for

More information

Linear fittings EVN Fluorescent fitting - zones 2 & 22

Linear fittings EVN Fluorescent fitting - zones 2 & 22 LIEAR FITTIGS - EV FLUORESCET FITTIG - ZOES 2 & 22 71 EV Fluorescent fitting - zones 2 & 22 Features Double central locking for ingress protection All components mounted on hinged and removable gear tray

More information

2.15. Ex-Linear luminaires for T5 HE fluorescent lamps. nllk W - 35 W (Zone 2 and 22)

2.15. Ex-Linear luminaires for T5 HE fluorescent lamps. nllk W - 35 W (Zone 2 and 22) .15 Ex-Linear luminaires for T5 HE fluorescent lamps (Zone and ) The energy-saving lighting solution Certified for use in hazardous areas in Zone and, the linear luminaires series nllk 10 for T5 fluorescent

More information

Tubular fittings Tubular fluorescent fitting XFF - Zones 1, 2 & 21, 22

Tubular fittings Tubular fluorescent fitting XFF - Zones 1, 2 & 21, 22 Tubular fluorescent fitting XFF - Zones 1, & 1, Features All components mounted on sliding gear tray for easy installation and maintenance Standard components used inside body allowing reduced maintenance

More information

AVN. - Zone 2, 21, 22 - Lower maintenance costs - Easy to install - Suited to ambient temperatures of up to +55 C. Ex n. Stainless steel clips

AVN. - Zone 2, 21, 22 - Lower maintenance costs - Easy to install - Suited to ambient temperatures of up to +55 C. Ex n. Stainless steel clips AVN - Zone 2, 21, 22 - Lower maintenance costs - Easy to install - Suited to ambient temperatures of up to +55 C Transparent polycarbonate diffuser Stainless steel clips Polyamide cable gland and plug

More information

Linear fittings EVTL Weatherproof LED fitting - Industrial applications

Linear fittings EVTL Weatherproof LED fitting - Industrial applications 89 Linear fittings LED Features Operating life up to 100 000 h High lumen output - 5 000 lumens with 100% yield - LED module with diffuser Double central locking for ingress protection All components mounted

More information

Compact Emergency Light Fittings Series C-LUX 6108 / 6508

Compact Emergency Light Fittings Series C-LUX 6108 / 6508 > Operating modes non-maintained operation non-maintained operation with switchable emergency light blocking > With continous operating test > For fluorescent lamps 8 W, d 16 mm, for two-pin holder G5

More information

Emergency Light Fittings for Fluorescent Lamps Series ECOLUX 6608

Emergency Light Fittings for Fluorescent Lamps Series ECOLUX 6608 > For fluorescent lamps 2 x 18 W and 2 x 36 W > For emergency light operation periods of 1.5 or 3 hrs > During emergency time: If emergency lamp broken changing to the other lamp > Battery case which can

More information

Linear fittings Fluorescent fitting EVN - Zones 2 & 22

Linear fittings Fluorescent fitting EVN - Zones 2 & 22 Fluorescent fitting Features Double central locking for ingress protection All components mounted on hinged and removable gear tray which gives easy access for maintenance Including accessories (cable

More information

Linear fittings EVTL Weatherproof LED fitting - Industrial applications

Linear fittings EVTL Weatherproof LED fitting - Industrial applications 89 Linear fittings LED Features Operating life up to 100 000 h High lumen output - 5 000 lumens with 100% yield - LED module with diffuser Double central locking for ingress protection All components mounted

More information

7 Lighting Technology

7 Lighting Technology 7 Lighting Technology Emergency Light Fittings for Fluorescent Lamps Series ECOLUX 6608 The single-battery-supplied emergency lamps of the ECOLUX 6608 lighting series are employable as safety lighting

More information

Control Stations & Switches: Control Stations Increased Safety Unicode 2 Series: Pre-drilled Control Stations

Control Stations & Switches: Control Stations Increased Safety Unicode 2 Series: Pre-drilled Control Stations Unicode 2 Series: Pre-drilled Control Stations Polamide U43W211 Polyester U23W211 Compliance Data: ATEX IEC and IECEx (Polyester): Stainless Steel U62W229 Aluminum U83W211 ATEX IEC / IECEx CE Ex de IIC

More information

4.6. Ex-Floodlights for high-pressure discharge lamps, series FZD 04 / FZD EN. (Zone 1, 2, 21, 22)

4.6. Ex-Floodlights for high-pressure discharge lamps, series FZD 04 / FZD EN. (Zone 1, 2, 21, 22) .6 Ex-Floodlights for high-pressure discharge lamps, series FZD 0 / FZD EN (Zone 1, 2, 21, 22) The maintenance- and installation-friendly FZD 0 floodlights for harsh operating conditions Due to the spatial

More information

Linear fittings EVT Weatherproof fluorescent fitting - Industrial applications

Linear fittings EVT Weatherproof fluorescent fitting - Industrial applications LIEAR FITTIGS - EVT FLUORESCET FITTIG - IDUSTRIAL APPLICATIOS 95 Features Double central locking for ingress protection All components mounted on hinged and removable gear tray which gives easy access

More information

Linear Luminaire with LED Series EXLUX 6002/2 Version IIC

Linear Luminaire with LED Series EXLUX 6002/2 Version IIC > For use in hazardous areas with gas group IIC > Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or pole mounted light fitting > Central locking

More information

Emergency Light Fitting for Fluorescent Lamps Series ECOLUX 6608 Economy

Emergency Light Fitting for Fluorescent Lamps Series ECOLUX 6608 Economy www.stahl.de > For fluorescent lamps 2 x 18 W and 2 x 36 W > Electronic ballast with integrated emergency light electronics > Battery is integrated in the lamp enclosure > For emergency light mode 1.5

More information

4.7. Ex-Floodlights for high-pressure discharge lamps, series FZD 04 (Zone 1, 2, 21, 22)

4.7. Ex-Floodlights for high-pressure discharge lamps, series FZD 04 (Zone 1, 2, 21, 22) .7 Ex-Floodlights for high-pressure discharge lamps, series FZD 0 (Zone 1, 2, 21, 22) The maintenance- and installation-friendly FZD 0 floodlights for harsh operating conditions Due to the spatial separation

More information

Zone 1 and Zone 2. Lighting Technology. Emergency Light Fittings Series EXLUX 6008

Zone 1 and Zone 2. Lighting Technology. Emergency Light Fittings Series EXLUX 6008 Lighting Technology Emergency Light Fittings Can be used in Zone 1 and Zone 2 As pendant or pole-mounting fittings For single- and two-pin fluorescent lamps With electronic ballast and integral emergency

More information

EXEL-L. Detail of the internal side. Transparent polycarbonate

EXEL-L. Detail of the internal side. Transparent polycarbonate EXEL-L - Complete with high efficiency LED tubes - Quick access to the internal electrical equipment - Double locking system operated by hexagonal-head tool - Zone 1, 2, 21, 22 Reinforced polyester resin

More information

2.4. Ex-Emergency light fittings with a self-contained battery system for fluorescent lamps

2.4. Ex-Emergency light fittings with a self-contained battery system for fluorescent lamps .4 Ex-Emergency light fittings with a self-contained battery system for fluorescent lamps ellk 18/18 NE / ellk 36/36 NE / ellm 18/18 NE (Zone 1,, 1, ) If you need a reliable and decentralized emergency

More information

Linear Luminaire with LED Series EXLUX 6402/2

Linear Luminaire with LED Series EXLUX 6402/2 > Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or side entry lamp > Central locking > All-pole disconnection by means of an N/C switch when the

More information

Emergency Light Fitting for Fluorescent Lamps Series 6009

Emergency Light Fitting for Fluorescent Lamps Series 6009 > As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W and 36 W > Central locking > All-pole disconnection via N/C switch when opening light fitting or

More information

7 Lighting Technology

7 Lighting Technology 7 Lighting Technology Light Fittings for Fluorescent Lamps Series EXLUX 6400 (Zones 2, 21 & 22) As pendant or pole-mounting fittings With electronic ballast For two-pin fluorescent lamps 1 or 2 lamp versions:

More information

Linear Luminaire for Fluorescent Lamps Series ECOLUX 6600

Linear Luminaire for Fluorescent Lamps Series ECOLUX 6600 > 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners www.stahl.de 10032E00 The light fittings series 6600

More information

Zone 1 and Zone 2. Lighting Technology. Compact Emergency Light Fittings Series C-LUX 6108

Zone 1 and Zone 2. Lighting Technology. Compact Emergency Light Fittings Series C-LUX 6108 Lighting Technology Compact Emergency Light Fittings Can be used in Zone 1 and Zone 2 With electronic ballast and integratal emergency light unit For continuous emergency operation 1 h or 1.5 h Operating

More information

PROTECTA III. Construction Tough glass reinforced polyester body

PROTECTA III. Construction Tough glass reinforced polyester body PROTECTA III 20 Construction Tough glass reinforced polyester body Polycarbonate diffuser with high resistance to UV and stress cracking Robust hinges and multipoint compressive clamping of diffuser closure

More information

Light Fitting for Fluorescent Lamps Series ECOLUX 6600

Light Fitting for Fluorescent Lamps Series ECOLUX 6600 > 1- or 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners www.stahl.de 10032E00 The light fittings series

More information

Light Fitting for Fluorescent Lamps Series ECOLUX 6600

Light Fitting for Fluorescent Lamps Series ECOLUX 6600 > 1- or 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners www.stahl.de 10032E00 The light fittings series

More information

Linear luminaire with LED Series EXLUX 6002

Linear luminaire with LED Series EXLUX 6002 > latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or pole mounted light fitting > Central locking > All-pole disconnection by means of an N/C switch

More information

LED Linear Luminaire Series EXLUX 6402

LED Linear Luminaire Series EXLUX 6402 > Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or side entry lamp > Central locking > All-pole disconnection by means of an N/C switch when the

More information

Emergency Luminaire with LED Series EXLUX 6409/1

Emergency Luminaire with LED Series EXLUX 6409/1 > Emergency luminaire for wall, ceiling, pendant or pole installation > Latest LED technology with a high luminous efficacy and a long service life > Central locking system > Weekly functional test > Annually

More information

EXENC-L. - Zone 2, Zone Low installation costs - Locking system operated by hexagonal-head tool - High quality electrical components

EXENC-L. - Zone 2, Zone Low installation costs - Locking system operated by hexagonal-head tool - High quality electrical components EXENC-L - Zone 2, Zone 21-22 - Low installation costs - Locking system operated by hexagonal-head tool - High quality electrical components Resin body reinforced polyester Fixing Brackets Transparent hood

More information

Linear Luminaire for Fluorescent Lamps Series EXLUX 6401

Linear Luminaire for Fluorescent Lamps Series EXLUX 6401 > As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp

More information

Linear Luminaire with LED Series EXLUX 6002

Linear Luminaire with LED Series EXLUX 6002 > Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or pole mounted light fitting > Central locking > All-pole disconnection by means of an N/C switch

More information

2.2. Ex-Linear LED light fittings. ellk/m 92 LED 400/800 / ellk/m 92 LED 400/800 V-CG-S / NE / NIB-HT / NIB-CSA (Zone 1, 2, 21, 22)

2.2. Ex-Linear LED light fittings. ellk/m 92 LED 400/800 / ellk/m 92 LED 400/800 V-CG-S / NE / NIB-HT / NIB-CSA (Zone 1, 2, 21, 22) . Ex-Linear LED light fittings ellk/m 9 LED 400/800 / ellk/m 9 LED 400/800 V-CG-S / NE / NIB-HT / NIB-CSA (Zone 1,, 1, ) The efficient solution for your explosion-protected lighting concept The explosion-protected

More information

TUNNEL54. Safety and fire resistance VENTILATION LIGHTING

TUNNEL54. Safety and fire resistance VENTILATION LIGHTING TUNNEL54 Safety and fire resistance VENTILATION LIGHTING 238 TUNNEL54 Safety and fire resistance VENTILATION TUNNEL54 fire resistant sockets for ventilators Page 240 LIGHTING TUNNEL54 junction boxes with

More information

Emergency Luminaire with LED Series EXLUX 6009/1 Version IIC

Emergency Luminaire with LED Series EXLUX 6009/1 Version IIC > For use in hazardous areas with gas group IIC > Emergency luminaire for wall, ceiling, pendant or pole installation > Latest LED technology with a high luminous efficacy and a long service life > Central

More information

L: pole type. X: ceiling type. Lamp number Lamp wattage(w) Explosion-proof light fittings for fluorescent lamp BAY51-18 x 1L

L: pole type. X: ceiling type. Lamp number Lamp wattage(w) Explosion-proof light fittings for fluorescent lamp BAY51-18 x 1L Lighting Technology BAY- x Series Explosion-proof Light Fittings for Fluorescent Lamp Explosion protection to -CENELEC -IEC Can be used in Zone and Zone One or two lamp version; Available lamp wattage:

More information

Protected

Protected 6.1 Protected 6.1 6.2 6.2 PPF1 PPF3 PPF4 PPF13 6.3 6.3 6.4 6.4 PPF11 PPF6 PPF5 PPF7 6.5 6.5 6.6 6.6 PPF8 PPF9 PPF10 PPF12 6.7 6.7 PPF14 1.9 1.9 1.10 1.10 1.11 1.11 1.12 1.10 Namibia- Pg 6 PPF1 Pluto vapourproof

More information

Panelboards & Motor Starters

Panelboards & Motor Starters Appleton s ATX series of Increased Safety distribution panels are available in IP66-rated fiberglass reinforced polyester (FRP) or 316L stainless steel and come in multiple sizes depending on the number

More information

Linear fittings EVD Fluorescent fitting - zones 21 & 22

Linear fittings EVD Fluorescent fitting - zones 21 & 22 DTS LIER FITTIGS - EVD FLUORESET FITTIG - ZOES 21 & 22 83 EVD Fluorescent fitting - zones 21 & 22 Features Double central locking for ingress protection ll components mounted on hinged and removable gear

More information

explosive environments Lighting

explosive environments Lighting explosive environments Lighting CLASSIFICATION OF THE ZONES GAS AND VAPOURS DUST PRESENCE OF EXPLOSIVE ATMOSPHERE ZONE 0 ZONE 20 Category 1G Category 1D Permanent ZONE 1 ZONE 21 Category 2G Category 2D

More information

Linear fittings EVT Weatherproof fluorescent fitting - Industrial applications

Linear fittings EVT Weatherproof fluorescent fitting - Industrial applications DTS LINER FITTINGS - EVT FLUORESENT FITTING - INDUSTRIL PPLITIONS 95 Features Double central locking for ingress protection ll components mounted on hinged and removable gear tray which gives easy access

More information

Light Fittings for Fluorescent Lamps Series EXLUX 6000 / 6400

Light Fittings for Fluorescent Lamps Series EXLUX 6000 / 6400 > As pendant light fitting or side entry lamp > Version with 1 or 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened > End of life

More information

ATX PRE Series 63 Amp Plugs and Sockets Increased Safety

ATX PRE Series 63 Amp Plugs and Sockets Increased Safety ATX PRE Series 63 Amp s and Sockets Applications s and sockets are used with stationary or portable electrically operated devices such as: Welding devices Lighting systems Conveyors Heaters Motor generator

More information

Linear Luminaire for Fluorescent Lamps Series EXLUX 6001

Linear Luminaire for Fluorescent Lamps Series EXLUX 6001 > As wall, ceiling and pendant light fitting or side entry lamp > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened

More information

Junction Boxes & Enclosures JBES and ECES Series: 316L Stainless Steel Enclosures Increased Safety

Junction Boxes & Enclosures JBES and ECES Series: 316L Stainless Steel Enclosures Increased Safety JBES Series Medium Voltage 11 kv ECES Series Compliance Data: ATEX - IEC: ATEX IEC CE Ex e II Ex ia IIC; Ex ib IIC T6 to T4 Ex td A21 T80 C to T130 C Ex de IIC; Ex demb IIC Operating Temperatures: -50

More information

Wellglass fittings EVH, EVX Wellglass fitting all zones - zones 1, 2, 21 & 22

Wellglass fittings EVH, EVX Wellglass fitting all zones - zones 1, 2, 21 & 22 WELLGLASS - EVH, EVX WELLGLASS FITTING - S 1, 2, 21 & 22 127 Wellglass fittings Features Compact design for easy installation For diffuse or ambient light Compatible with energy saving lamps or discharge

More information

7 Lighting Technology

7 Lighting Technology 7 Lighting Technology Sheet-Steel Emergency Light Fitting 09361E00 and 6418 (Zones 2, 21 and 22) emergency light fittings in sheet-steel can be used for safety illumination, especially in spraying and

More information

Floodlight fittings HPS, MH or Halogen Floodlight fitting XSF, XQF, XEF - Zones 1, 2

Floodlight fittings HPS, MH or Halogen Floodlight fitting XSF, XQF, XEF - Zones 1, 2 Features Wide or narrow beam Ex e integral junction box Flat or pole mounting Supplied with lamp installed Including accessories (cable gland & plug) Supplied with offshore grade paint Manufactured from

More information

10 Load and Motor Switchgear

10 Load and Motor Switchgear 10 Load and Motor gear Safety es 01941E00 Safety switches ensure the obligatory isolation of electrical power under condition of equipment cleaning, maintenance and repair. Other methods of isolation,

More information

J: Emergency lighting (optional) L: pole type X: ceiling type Mounting

J: Emergency lighting (optional) L: pole type X: ceiling type Mounting Lighting Technology Light Fittings for Fluorescent Lamp BAY1-Q Series Explosion-proof Light Fittings for Fluorescent Lamp Explosion protection to -CENELEC -IEC -NEC Can be used in Zone 1 and Zone Zone

More information

EX-REPAIR AND MAINTENANCE RECEPTACLES

EX-REPAIR AND MAINTENANCE RECEPTACLES EX-REPAIR AND MAINTENANCE RECEPTACLES A 3 A plugs and receptacles plastic version for zones, 2, 2 and 22 For maintenance, repair and upgrading work, appliances such as drills, welding transformers, hand

More information

ATX PRE Series 125 Amp Plugs and Sockets Increased Safety

ATX PRE Series 125 Amp Plugs and Sockets Increased Safety ATX PRE Series 125 Amp s and Sockets Applications s and sockets are used with stationary or portable electrically operated devices such as: Welding devices Lighting systems Conveyors Heaters Motor generator

More information

Compact Sheet-steel Emergency Light Fitting Series 6118/1

Compact Sheet-steel Emergency Light Fitting Series 6118/1 www.stahl.de Compact Sheet-steel Emergency Light Fitting > Electronic ballast with integrated emergency light electronics for emergency light mode in case of power failure, charging of battery and automatic

More information

Control Equipment. ATHEX bvba Tel: +32 (0) Fax: +32 (0) Alpenroosbaan 2, 2900 Schoten, België

Control Equipment. ATHEX bvba Tel: +32 (0) Fax: +32 (0) Alpenroosbaan 2, 2900 Schoten, België Control Equipment 01616E00 Position switches are used to monitor the position of moving parts of machines and plant. Can be used in safety circuits, as the device satisfies EN 60 947-5-1/DIN VDE 0660 part

More information

Sheet Steel Emergency Light Fitting Series 6018

Sheet Steel Emergency Light Fitting Series 6018 > For an operating duration of 1.5 or 3 h > Operating modes Continuous operation Continuous operation with switchable emergency light blocking > Weekly functional test > Total discharge protection and

More information

2.2. Ex-Linear LED light fittings. ellk/m 92 LED 400/800 / ellk/m 92 LED 400/800 V-CG-S / NE / NE-HT / NIB-HT / NIB-CSA (Zone 1, 2, 21, 22)

2.2. Ex-Linear LED light fittings. ellk/m 92 LED 400/800 / ellk/m 92 LED 400/800 V-CG-S / NE / NE-HT / NIB-HT / NIB-CSA (Zone 1, 2, 21, 22) . Ex-Linear LED light fittings ellk/m 9 LED 400/800 / ellk/m 9 LED 400/800 V-CG-S / NE / NE-HT / NIB-HT / NIB-CSA (Zone 1,, 1, ) The efficient solution your explosion-protected lighting concept The explosion-protected

More information

FHL. Ex d. Body in aluminium

FHL. Ex d. Body in aluminium Ex d FHL Body in aluminium - Zones 1, 2, 21, 22 - Integrated electronic ballast - Power supply 24 V DC - Compact 24/36 W fluorescent tube - Degree of protection IP66 Guard in stainless steel Polycarbonate

More information

Protecta III GRP ATEX

Protecta III GRP ATEX EOL Protecta III GRP ATEX INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS Important: Please read the following instructions carefully prior to installation or maintenance of this equipment. Types

More information

SPOOL VALVES solenoid air operated 1/4 to 1/2 tapped body and NAMUR for integrated pilot

SPOOL VALVES solenoid air operated 1/4 to 1/2 tapped body and NAMUR for integrated pilot SPOOL VALVES operated / to / tapped body and NAMUR for integrated pilot ATEX /-/ Series - FEATURES The valves offer environmental protection against the ingress of liquids, dusts or other foreign matter

More information

Linear Luminaire for Fluorescent Lamps Series ECOLUX METAL 6010/1

Linear Luminaire for Fluorescent Lamps Series ECOLUX METAL 6010/1 > For use in Zones 1, 2, 21, 22 and safe area > 2-lamp version: 18 W 36 W > Housing made of sheet steel or stainless steel SS304 / > Quick fasteners www.stahl.de 15709E00 The light fittings of Series ECOLUX

More information

Emergency Light Fitting for Fluorescent Lamps Series EXLUX 6008 / 6408

Emergency Light Fitting for Fluorescent Lamps Series EXLUX 6008 / 6408 > As pendant light fitting or side entry lamp > Version with 2 lamps: 18 W and 36 W > Central locking > Weekly functional test > Light duration test of the emergency lighting once a year www.stahl.de 10068E00

More information

DE 02 Ceiling Luminaire, recessed

DE 02 Ceiling Luminaire, recessed 0014 0015 0016 0014-001 0015-003 0016 DE 02 Ceiling Luminaire, recessed Housing: phosphate coated steel,powder coated white Diffuser: polycarbonate, opal Fascia: gold, silver, white 2x18W/2x36W Applications:

More information

HAZ AREA LIGHTING. Product Brochure. Design to Manufacture FOR HAZARDOUS AREAS. Engineering Solutions. An A-Belco Group Company

HAZ AREA LIGHTING. Product Brochure. Design to Manufacture FOR HAZARDOUS AREAS. Engineering Solutions. An A-Belco Group Company HAZ AREA LIGHTING FOR HAZARDOUS AREAS Product Brochure Engineering Solutions Design to Manufacture An A-Belco Group Company The Hadar Lighting Range Designed and manufactured in the UK by A-Belco Hazardous

More information

7 Lighting Technology

7 Lighting Technology 7 Lighting Technology Pendant Light Fitting IEC 10560E00 For use in Zone 2 Zone 21 and Zone 22 Three sizes are available size 1 up to 150 W size 2 up to 250 W size 3 up to 600 W Available light sources

More information

PRE Series 63 Amp Plugs and Sockets Increased Safety

PRE Series 63 Amp Plugs and Sockets Increased Safety Applications s and sockets are used with stationary or portable electrically operated devices such as: Welding devices Lighting systems Conveyors Heaters Motor generator sets Air conditionings Compressors

More information

Start Waterproof LED START WATERPROOF LED 1265MM TWIN 4000K PRODUCT OVERVIEW

Start Waterproof LED START WATERPROOF LED 1265MM TWIN 4000K PRODUCT OVERVIEW Range Features Range of Weatherproof LED luminaires. Available in 3 lengths: 662mm, 1,265mm & 1,565mm single with single or twin lamp options. Choose from Neutral White 4000K or Cool White 6500K. High

More information

EWE. Ex de. Cooling fins

EWE. Ex de. Cooling fins EWE Cooling fins - Suitable for installation with ambient temperature from -50 C to +60 C - Suitable for discharge lamps of up to 150W - Suitable for loop-in/loop-out connections - Zones 1, 2, 21, 22 4

More information

Floodlight LED Series 6525

Floodlight LED Series 6525 www.stahl.de > Floodlight Zones 2, 21 and 22 with highly efficient LEDs > 3 different light distribution types for adjusting to the illumination task > Standard enclosure made of sheet steel single powder

More information

Floodlight LED Series 6125

Floodlight LED Series 6125 www.stahl.de > Floodlight Zones 1, 2 and 21, 22 with highly efficient LEDs > 3 different light distribution types for adjusting to the illumination task > Enclosure made of sheet steel single powder coated

More information

Compact Sheet-Steel Light Fittings Series 6114/1

Compact Sheet-Steel Light Fittings Series 6114/1 > As 1- or 3-lamp version > Versions Pendant fitting Wall-mounting fitting Flush mounted fitting > Powder-coated steel or stainless steel > Central lock > All pole disconnection via NC switch in positive

More information

Compact Sheet-Steel Light Fittings Series 6114

Compact Sheet-Steel Light Fittings Series 6114 > As 1-, 2- oder 3-lamp version > Versions Pendant fitting Wall-mounting fitting Flush mounted fitting > Powder-coated steel or stainless steel > Central lock > All pole disconnection via NC switch in

More information

Floodlight LED Series 6525

Floodlight LED Series 6525 www.stahl.de > Floodlight Zones 2, 21 and 22 with highly efficient LEDs > 3 different light distribution types for adjusting to the illumination task > Standard enclosure made of single-coated stainless

More information

Areamaster LED Flood/High Bay Luminaires For Hazardous Locations. 250 W, 400 W, 750 W, 1000 W HID Light Level Equivalent

Areamaster LED Flood/High Bay Luminaires For Hazardous Locations. 250 W, 400 W, 750 W, 1000 W HID Light Level Equivalent Class I, Division 2, Groups A, B, C, D Class I, Zone 2 Group IIC Class II, Division 1, Groups E, F, G Class II Division 2, Groups F, G Class III Simultaneous Exposure Type 3R, 4, 4X IP66/67 Applications

More information

Power (W) Tamb 40 o C LX1GAM4LB57 5,700 10, T3 T100 o C T4 T85 o C 13

Power (W) Tamb 40 o C LX1GAM4LB57 5,700 10, T3 T100 o C T4 T85 o C 13 Gamma Floodlight IP66/67 The Gamma is a high output LED floodlight is designed for use in Zone 1 & 21 hazardous areas. The compact design and flexible mounting allows the Gamma to also be used as a lowbay.

More information

Plugs & Sockets PRE Series: 16 A Plugs and Sockets Increased Safety

Plugs & Sockets PRE Series: 16 A Plugs and Sockets Increased Safety PRE Series: 16 A Plugs and Sockets Increased Safety ELV: Extra Low Voltage Plug Wall Mounting Socket Mobile Socket Flush Socket 20/25 Vac 20/50 Vdc 40/50 Vac LV: Low Voltage Plug Wall Mounting Sockets

More information

Making Hazardous Environments Work

Making Hazardous Environments Work Making Hazardous Environments Work Our Vision We aim to be the first choice supplier of lighting equipment to hazardous and industrial markets worldwide. 1 CONTENTS PAGE 1 VICTOR RANGE 2-3 INTRODUCTION

More information

4.5. Ex Floodlights for high-pressure discharge lamps, series PX 04 and FLT 10. (Zone 1, 2, 21, 22)

4.5. Ex Floodlights for high-pressure discharge lamps, series PX 04 and FLT 10. (Zone 1, 2, 21, 22) .5 Ex Floodlights for high-pressure discharge lamps, series PX 0 and FLT 10 (Zone 1, 2, 21, 22) The powerful floodlights for harsh environments Thanks to the high degree of protection IP66, the robust

More information

PRE Series 125 Amp Plugs and Sockets Increased Safety

PRE Series 125 Amp Plugs and Sockets Increased Safety s and Receptacles ATEX/IECEx/NBR IEC Ex e Zone 1 Rated s and Receptacles PRE Series 125 Amp s and Sockets - IK10 Applications s and sockets are used with stationary or portable electrically operated devices

More information

Operating Instructions

Operating Instructions Operating Instructions Pendant Light Fitting > Contents 1 Contents 1 Contents...2 2 General Information...2 3 General Notes Regarding Safety...3 4 Intended Area of Application...4 5 Technical Data...5

More information

EX-RECESSED CEILING LIGHT FITTINGS

EX-RECESSED CEILING LIGHT FITTINGS EX-RECESSED CEILING LIGHT FITTINGS ellb 20... 1-5 W Metallic design for Zone 1 and 21 The ellb 20 explosion-protected ceiling light fitting with electronic ballast meet the requirements of ATEX-Directive

More information

Industrial luminaires

Industrial luminaires Industrial luminaires acciaio When rapidity is money......you install 4 fittings in the time of 1 Industrial luminaires T5 and T8 Material: body: in zinc steel painted color: gray Degree of protection:

More information