4.6. Ex-Floodlights for high-pressure discharge lamps, series FZD 04 / FZD EN. (Zone 1, 2, 21, 22)

Transcription

1 .6 Ex-Floodlights for high-pressure discharge lamps, series FZD 0 / FZD EN (Zone 1, 2, 21, 22) The maintenance- and installation-friendly FZD 0 floodlights for harsh operating conditions Due to the spatial separation of the lamp module, lamp base and ballast, this powerful and robust spotlight for high-pressure discharge lamps can be installed and maintained in an easy and quick way. The Ex-e ballast enclosure with the compensation capacitor can be mounted within arm s reach. Only the light Ex-e enclosure made of copper-free aluminium for the ignitor is mounted at the desired mounting height of the floodlight and the Ex-d lamp module is simply plugged in and locked. This allows a oneman installation without a crane or other lifting tools. Flexibility due to modular design All the components of the modular Ex floodlight have been certified separately as components. The flameproof lamp module can be easily separated from the housing once the locking screw has been loosened. Two sealing systems in the degree of protection IP66 ensure permanently protected Ex-d contacts. There is no need to switch off the mains voltage to separate the module from the luminaire. This means that a simple lamp change and easy cleaning of the lamp modules is possible, even outside the hazardous area. Optionally, the module can be fitted with narrow-angle and wide-angle reflectors these can even be fitted retrospectively and without any additional installation work. A special advantage The simple and quick exchanging of the lamp module means that changing the lamp is not a problem, even under extreme weather or climate conditions (snow, ice, and particularly low ambient temperatures). The compact version The FZD EN combines easy lamp replacement with a compact enclosure. All components are protected in one Ex-d enclosure. For extreme environmental conditions The FZD 0 floodlight series with its maintenance-friendly replaceable lamp module and its large operating/ambient temperature range from -5 C up to +5 C is the ideal solution for illuminating large areas and plants in challenging climates. Features Easy lamp replacement due to the Ex-d lamp module Modular design of housing Ex-e/Ex-d High degree of protection IP 66 Optional internal wide beam or narrow beam reflector Can be used in ambient temperatures as low as -5 C CU-Certificate for Eurasian Economic Community available EATON

2 Ordering details Floodlights.6 Ordering details Type Version 2) Lamp / Illuminant Reflector Rated luminous flux FZD 0 with cable gland FZD W GRP HIT / HST 250 W narrow beam 100 / FZD W GRP HIT / HST 250 W wide beam 100 / Weight Cable gland/ thread 23.9 kg 1 x M25 for 23.9 kg 1 x M25 for FZD 0 00 W GRP HIT 00 W narrow beam 300 lm 23.9 kg 1 x M25 for FZD 0 00 W GRP HIT 00 W wide beam 300 lm 23.9 kg 1 x M25 for FZD 0 00 W GRP HST 00 W narrow beam 8000 lm 23.9 kg 1 x M25 for FZD 0 00 W GRP HST 00 W wide beam 8000 lm 23.9 kg 1 x M25 for FZD W st. steel HIT / HST 250 W narrow beam 100 / FZD W st. steel HIT / HST 250 W wide beam 100 / 2.9 kg 1 x M25 for 2.9 kg 1 x M25 for FZD 0 00 W st. steel HIT 00 W narrow beam 300 lm 2.9 kg 1 x M25 for FZD 0 00 W st. steel HIT 00 W wide beam 300 lm 2.9 kg 1 x M25 for FZD 0 00 W st. steel HST 00 W narrow beam 8000 lm 2.9 kg 1 x M25 for FZD 0 00 W st. steel HST 00 W wide beam 8000 lm 2.9 kg 1 x M25 for FZD 0 without cable gland FZD W GRP HIT / HST 250 W narrow beam 100 / FZD W GRP HIT / HST 250 W wide beam 100 / 23.9 kg 2 x M25, 23.9 kg 2 x M25, FZD 0 00 W GRP HIT 00 W narrow beam 300 lm 23.9 kg 2 x M25, FZD 0 00 W GRP HIT 00 W wide beam 300 lm 23.9 kg 2 x M25, FZD 0 00 W GRP HST 00 W narrow beam 8000 lm 23.9 kg 2 x M25, FZD 0 00 W GRP HST 00 W wide beam 8000 lm 23.9 kg 2 x M25, FZD W st. steel HIT / HST 250 W narrow beam 100 / FZD W st. steel HIT / HST 250 W wide beam 100 / 2.9 kg 2 x M25, 2.9 kg 2 x M25, FZD 0 00 W st. steel HIT 00 W narrow beam 300 lm 2.9 kg 2 x M25, FZD 0 00 W st. steel HIT 00 W wide beam 300 lm 2.9 kg 2 x M25, FZD 0 00 W st. steel HST 00 W narrow beam 8000 lm 2.9 kg 2 x M25, FZD 0 00 W st. steel HST 00 W wide beam 8000 lm 2.9 kg 2 x M25, depends on used lamps 2) GRP: ballast enclosure made from GRP-material / St.S: ballast enclosure made from stainless steel 316L Scope of delivery without lamp and fixing accessories, if not stated otherwise. Metal cable glands see catalogue part 2: ff Screw plug Order No. 1 x M25 NOR x M25 NOR x M25 NOR x M25 NOR x M25 NOR x M25 NOR x M25 NOR x M25 NOR x M25 NOR x M25 NOR x M25 NOR x M25 NOR x M25 NOR x M25 NOR x M25 NOR x M25 NOR x M25 NOR x M25 NOR x M25 NOR x M25 NOR x M25 NOR x M25 NOR x M25 NOR x M25 NOR EATON 1..37

3 .6 Ordering details Floodlights Ordering details Type Lamp / Illuminant FZD EN FZD EN 250 W HST 250 W / HIT 250 W FZD EN 250 W HST 250 W / HIT 250 W Reflector Rated luminous flux wide beam 100 lm / lm narrow beam 100 lm / lm Weight Cable gland/ thread 39 kg 1 x M25 for, 39 kg 1 x M25 for, FZD EN 00 W HIT 00 W wide beam lm 39 kg 1 x M25 for, FZD EN 00 W HIT 00 W narrow beam lm 39 kg 1 x M25 for, FZD EN 00 W HST 00 W wide beam 8000 lm 39 kg 1 x M25 for, FZD EN 00 W HST 00 W narrow beam 8000 lm 39 kg 1 x M25 for, depends on used lamps Screw plug Order No. 1 x M x M x M x M x M x M Accessories FZD 0 and FZD EN Type Content FZD 0 FZD EN OU Order No. Lamp module Lamp module 250 W/00 W complete with internal reflector, 1 narrow beam X X wide beam X X Slip fitter Adapter for 1 1/ pole mounting (Innen-Ø = 7.5 mm) compl. with X 1 NOR fixing screws Slip fitter Adapter for 2 pole mounting (Innen-Ø = 66 mm) compl. with fixing X 1 NOR screws Swivel bracket Adjustable hinge for wall-/pole mounting X 1 NOR Mounting plate Stainless steel for wall-/pole mounting (pipe clamps not included) X 1 NOR Pipe clamp 1 1/ pipe clamp (1 pcs.) galvanized Ø 38-2 mm² X Pipe clamp 1 1/ pipe clamp (1 pcs.) Stainless steel Ø 38-2 mm² X Pipe clamp 1 1/2 pipe clamp (1 pcs.) galvanized Ø 7-51 mm² X Pipe clamp 2 pipe clamp (1 pcs.) galvanized Ø 56 - mm² X HIT 250 W Metal halide lamp 250 W E0 x x 1 CGS P1007 HIT 00 W Metal halide lamp 00 W E0 x x 1 CGS P1008 HST 250 W High pressure sodium lamp 250 W E0 x x HST 00 W High pressure sodium lamp 00 W E0 x x Scope of delivery without lamp and fixing accessories, if not stated otherwise. Metal cable glands see catalogue part 2: ff Other lamps on request EATON

4 Polar curve Floodlights.6 FZD with reflector wide beam C 0 C l/cd/klm FZD with reflector narrow beam C 0 C l/cd/klm EATON 1..39

5 .6 Dimension drawing FZD 0 / FZD EN FZD 0 250/00 W Ballast enclosure: version 250/00 W: Ø 25 0 W: Ø X X Ø 9 Ballast enclosure: stainless steel version X X27 FZD EN 250/00 W Swivel bracket ,3 76, Slip fitter 276 Mounting plate Ø , , Dimensions in mm 1..0 EATON

6 Technical data FZD 0 / FZD EN.6 Technical data FZD 0 FZD EN EC-Type Examination Certificate BVS 10 ATEX E 139 X BVS 10 ATEX E 139 X IECEx Certificate of Conformity IECEx BKI IECEx BKI Marking accd. to 9/9/EC D II 2 G Ex de mb q IIC T3/T Gb D II 2 D Ex tb IIIC T Db D II 2 G Ex de mb q IIC T3/T Gb D II 2 D Ex tb IIIC T Db Permissible ambient temperature -5 C up to +5 C -5 C up to +5 C Rated voltage 2 V AC 2) 2 V AC Rated current 0 W: 0.8 A / 250 W: 1.3 A / 00 W: 2.10 A 250 W: 1.3 A / 00 W: 2.1 A Frequency 50 Hz 2) 50 Hz Power factor cos > 0.9 > 0.9 Circuit Compensated circuit Compensated circuit Protection class I I Lamp / Illuminant HST / HIT HST / HIT Lamp name High pressure sodium lamp / metal halide lamp High pressure sodium lamp / metal halide lamp Rated luminous flux 3) 3) Lamp cap E0 accord. IEC 238 E0 accord. IEC 238 Light output ratio 66 % 66 % Dimensions (L x W x H) See dimension drawing 573 x 3 x 570 mm Connecting terminals L, N, PE: 2 x mm 2 + mm 2 PE (Ballast enclosure) L, N, PE: 2 x mm 2 + mm 2 PE enclosure earth L, N, PE: 2 x 2.5 mm mm 2 PE (lamp module) Enclosure colour Grey Grey Enclosure material Ballast enclosure: glass-fibre reinforced polyester Llight alloy or stainless steel, floodlight enclosure: light alloy Weight Lamp module: approx kg 28 kg (enclosure); 10.6 kg lamp module Floodlight enclosure: approx..3 kg Ballast enclosure: 9 kg (glass-fibre reinforced polyester) Ballast enclosure: 10 kg (stainless steel) Cable glands / gland plates / enclosure drilling 1 x M25 x 1.5 with -cable glands Ex-e M25 for non-amoured cable Ø 8-17 mm (floodlight enclosure) ) 3 x M25 x 1.5, 2 x M25 cable gland Ex-e 2 x M25 x 1.5 with cable gland Ex-e M25 for non-amoured cable Ø 8-17 mm, other plugged option: with M20, without cable gland for cable Ø 8-17 mm 1 x M25 plugged (ballast enclosure) 5) Type of mounting Ceiling-/wall mounting Ceiling-/wall mounting Degree of protection accd. to EN 529 IP66 IP66 Protective cover / protective bowl Borosilicate glass Borosilicate glass Reflector Polished aluminium reflector Polished aluminium reflector see table 2) other voltages and frequencies on request 3) see table luminaire data ) Connection for ballast 5) one for connection of the floodlight enclosure, two for line supply Additional luminaire data FZD 0 / FZD EN Temperature class II 2 G max. surface temp. II 2 D Lamp Luminous flux T U 0 C T U 5 C T U 0 C T U 5 C HST / HIT 0 W 000 lm T T T 125 C T 1 C HST / HIT 250 W T3 T3 T C T 0 C HST / HIT 00 W 8000 lm T3 T 1 C depends on used lamps EATON 1..1