SunLuce Adjustable projector

Transcription

1 Design Fabio Reggiani The essential and elegant nature of Sunios has been developed further in, a more compact projector but with many more versions. In, control gear and optical compartment are separated so the luminaire has excellent heat dissipation and maximum adjustability, making it great for track or surface mounting. In the LED LUCE version it can be connected to the emergency pack and in the version with built-in dimmer the luminous intensity of each single luminaire can be adjusted. The excellent quality and efficiency of LED LUCE and the flexibility of the lighting design brought about by the interchangeable optics make this luminaire suitable for general or accent lighting in small and/or large spaces. 42

2 Corot and modern art: Souvenirs et Impressions Verona, Italy Palazzo della Gran Guardia, 27 November March 2010 by kind permission of the Museums of Art and Monuments office, Municipality of Verona Layout by Alba Di Lieto and Nicola Brunelli 43

3 Body Die-cast aluminium; structure with separate compartments for optimum heat dissipation. LED LUCE system Consisting of metallised polycarbonate reflector (including light collimator for symmetric beams) and polycarbonate safety shield (clear for very narrow light beams; satin for narrow, medium and wide beams and satin/prismatic for the Wall Washer Mira version). IOS (Interchangeable Optical System) Consisting of a 99.99% pure aluminium reflector with twist-lock fixing system and tempered safety glass (clear for narrow beams, microsphere for medium and wide beams, prismatic for the Wall Washer Mira version). The special knurling on the outer edge makes the reflector easy to grip and to attach to the luminaire. Interchangeable optics can change the width of the light beam (narrow, medium, wide, long) and its colouring (green, light blue, yellow, red) using the IOS interchangeable optics with twistlock fixing system; easy to replace with a simple twist. The IOS optics can also be bought separately. Adjustment 356 in the horizontal axis, 90 in the vertical axis; friction device with screw lock. Built-in control gear technologies For LED LUCE: constant current driver. Dimmer for the version with luminous flux adjustor. For metal halide lamps: HPF or HF control gear. For 12V lamps: electronic transformer. Installation surface mounted projector comes with special quick-fit connecting modules providing both mechanical and electrical connection. The special accessory allows cable access from the side. Track mounted versions are fitted with an adapter for electrical and mechanical connection. Separate compartments for optimum heat dissipation Standard finishes 10 white 21 black 28 metallised grey RJ45 socket set up for connection to the emergency pack Built-in dimmer for luminous intensity adjustment of each single luminaire (30-100%) Convection heat sink LED LUCE LL2 Interchangeable optics The LED LUCE VERSIONS are set up for connection to the emergency pack. SUNLUCE LED comes in two versions: with standard external dimmer (example: Triac leading edge phase cut dimmer for incandescent lamps or electronic trailing edge phase cut dimmer for low voltage lamps) with built-in dimmer for luminous intensity adjustment of each single luminaire and they are both set up for connection to the emergency pack. 44

4 LED LUCE is the new Reggiani lighting system with high-power LED technology (16 watts, 850 lm, CRI 90, 3000 K). LED LUCE has an excellent white colour, 50,000-hour lifetime, low consumption, immediate switch-on even at very low temperatures, and is environmentally friendly and maintenance-free, making it an excellent alternative to traditional light sources. The IOS System combines the luminous efficiency of the optics (up to 90%) with the greatest ease of installation based on the twist-lock fixing system. A wide range of colours, sizes, light sources and light beams make it possible to effectively light, and still save energy. It only takes a few seconds to change the colour or shape of the light beam. TRACK MOUNTED SURFACE MOUNTED TRACK MOUNTED SURFACE MOUNTED Extensive light beam selection (10 different optics, for symmetric beams from 2x6 to 2x27 as well as Wall Washer Mira beams) to maximise efficiency and versatility of the lighting design layout. 45

5 Wall mounted projector Body: die-cast aluminium; structure with separate compartments for optimum heat dissipation. Optics: 80 mm Ø IOS (Interchangeable Optical System) reflector (LL2) included. Adjustment: 356 in the horizontal axis; 90 in the vertical axis; friction device with screw lock. Interchangeable optics: the luminaire can change the width of the light beam (narrow, medium, wide, long) using the IOS interchangeable optics with twist-lock fixing system; easy to replace with a simple twist. The IOS optics can also be bought separately. Built-in control gear technologies: for LED LUCE: constant current driver; for metal halide lamps: HF control gear; for 12V lamps: electronic transformer comes in two versions: with built-in dimmer for luminous intensity adjustment of each single luminaire provision for dimming with standard external dimmer (example: Triac leading edge phase cut dimmer for incandescent lamps or electronic trailing edge phase cut dimmer for low voltage lamps). Installation: luminaires complete with adapter for mounting on 1-circuit track and 3-circuit track; surface mounted using quick-fit connecting module. Standard finishes: 10 white 21 black 28 metallised grey Plug and Play: adjustable projector with LED LUCE LL2 + driver Light source: LED LUCE (16W, 850lm, 3000K, CRI 90) Total power consumption: LED LUCE + driver = 18W * In order to guarantee the IP40 degree of protection, the track needs the relative blanking cover (see 2010 Catalogue, page 316) Accessories: (see page 47) / / / / / (IOS) Interchangeable optical system Emergency pack for track mounted luminaires Emergency pack for surface mounted luminaires / Framing projectors Accessory for side entry of cables (for surface mounted luminaire only) LL2 - Six beam widths: very narrow, narrow, medium, wide and Wall Washer Mira. 80 mm Ø IOS reflector made from metallised polycarbonate (with light collimator for symmetric beams). Polycarbonate safety shield: clear, satin and satin/prismatic for the Wall Washer Mira version. 210 IP 20 IP 40 IP20 IP20/(40*) IP40 Control gear Watt (η) Efficacy driver 1x x driver 1x x driver 1x x driver 1x x driver 1x x driver 1x x driver 1x x driver 1x x driver 1x x driver 1x x driver 1x x driver 1x x driver 1x x driver 1x x driver 1x x driver 1x Wall Washer Mira driver 1x Wall Washer Mira driver 1x Wall Washer Mira

6 Plug and Play: adjustable projector with LED LUCE LL2 + driver Light source: LED LUCE (16W 850lm 3000K CRI 90) Total power consumption: LED LUCE + driver = 18W. Control gear technologies: projector with built-in dimmer for luminous intensity adjustment of each single luminaire. * In order to guarantee the IP40 degree of protection, the track needs the relative blanking cover (see 2010 Catalogue, page 316) Accessories: (see page 47) / / / / / (IOS) Interchangeable optical system Emergency pack for track mounted luminaires Emergency pack for surface mounted luminaires / Framing projectors Accessory for side entry of cables (for surface mounted luminaire only) Built-in dimmer LL2 - Six beam widths: very narrow, narrow, medium, wide and Wall Washer Mira. 80 mm Ø IOS reflector made from metallised polycarbonate (with light collimator for symmetric beams). Polycarbonate safety shield: clear, satin and satin/prismatic for the Wall Washer Mira version. 210 PROJECTOR WITH BUILT-IN DIMMER IP 20 IP 40 IP20 IP20/(40*) IP40 Control gear Dimmer Watt (η) Efficacy driver built-in 1x x driver built-in 1x x driver built-in 1x x driver built-in 1x x driver built-in 1x x driver built-in 1x x driver built-in 1x x driver built-in 1x x driver built-in 1x x driver built-in 1x x driver built-in 1x x driver built-in 1x16 0,80 2x driver built-in 1x x driver built-in 1x x driver built-in 1x x driver built-in 1x Wall Washer Mira driver built-in 1x Wall Washer Mira driver built-in 1x Wall Washer Mira Interchangeable optical system to be purchased in the required finish to change the width and colour of the light beam. ACCESSORIES Ø 80mm Shield finish x 6 00 Clear x 9 00 Satin x Satin x Satin x Satin Wall Washer Mira 00 Satin/prismatic Emergency pack for LED LUCE track mounted projectors white 21 black 28 metallised grey Emergency pack for LED LUCE surface mounted projectors white 21 black 28 metallised grey For surface mounted luminaire only. Accessory for side entry of wiring, to use when the power system has external cables white 21 black 28 metallised grey Framing projectors for square or rectangular light frames (see pages 8-9) Finish black Framing projectors for round light frames (see pages 8-9) Finish black 47

7 MT GU6.5 for metal halide lamps, 20/35 W Control gear technologies: HF control gear * In order to guarantee the IP40 degree of protection, the track needs the relative blanking cover (see 2010 Catalogue, page 316) Accessories: (see page 48) / / / (IOS) Interchangeable optical system Anti-glare louvre Accessory for side entry of cables (for surface mounted luminaire only) Four beam widths: narrow, medium, wide and Wall Washer Mira. 80 mm Ø IOS reflector made from 99.99% pure aluminium; twist-lock fixing system; tempered safety glass (clear, microsphere and prismatic for the Wall Washer Mira version). 210 IP 20 IP 40 IP20 IP20/(40*) IP40 Control gear HF 1x20 Narrow HF 1x20 Narrow HF 1x20 Narrow HF 1x20 Medium HF 1x20 Medium HF 1x20 Medium HF 1x20 Wide HF 1x20 Wide HF 1x20 Wide HF 1x20 Wall Washer Mira HF 1x20 Wall Washer Mira HF 1x20 Wall Washer Mira HF 1x35 Narrow HF 1x35 Narrow HF 1x35 Narrow HF 1x35 Medium HF 1x35 Medium HF 1x35 Medium HF 1x35 Wide HF 1x35 Wide HF 1x35 Wide HF 1x35 Wall Washer Mira HF 1x35 Wall Washer Mira HF 1x35 Wall Washer Mira Watt Interchangeable optical system to be purchased in the required finish to change the width and colour of the light beam. Ø 80mm ACCESSORIES Filter finishes Glass filters Glass selective filters for lighting foodstuffs Coloured dichroic glass filters Clear I R Anti UV Green Light blue Orange Pink Blue Green Yellow Red Narrow Medium Wide Wall Washer Mira 00 For surface mounted luminaire only. Accessory for side entry of wiring, to use when the power system has external cables white 21 black 28 metallised grey Anti-glare louvre Finish black 48

8 QR-111 for low voltage halogen lamps, max 65 W Control gear technologies: built-in electronic transformer. Accessories: (see page 49) Accessory for side entry of cables (for surface mounted luminaire only) G 53 Built-in dimmer ø 140 ø 235 ø 140 ø 235 ø 140 ø 220 IP 20 IP 40 IP20 IP20/(40*) IP40 Transformer Dimmer Watt electronic built-in 1x65 max of the lamp electronic built-in 1x65 max of the lamp electronic built-in 1x65 max of the lamp electronic 1x65 max of the lamp electronic 1x65 max of the lamp electronic 1x65 max of the lamp ACCESSORIES For surface mounted luminaire only. Accessory for side entry of wiring, to use when the power system has external cables white 21 black 28 metallised grey 49