Luminaires CG-S Eaton. All Rights Reserved.

Transcription

1 Luminaires CG-S

2 Agenda Applications / Requirements Luminaire Portfolio GuideLed Plastic Luminaires Escape Sign Panel Luminaires, LED Aluminium Luminaires Downlights Escape Sign Cubes Luminaires with High Degree of Protection Explosion Protected Luminaires Monitoring Modules and Electronic Ballasts

3 Each emergency luminaire is important it protects life and health.

4 MAINS LIGHTING 4

5 BLACKOUT Verschiedene Installationsvarianten 5 5

6 What is missing? Escape sign luminaire BLACKOUT 6

7 Escape route illumination BLACKOUT 7

8 Applications / Requirements

9 Applications During blackout: Safety light is supplied The escape routes out of the building are shown Illumination of the escape routes guarantees safe exiting During regular power supply: Escape routes are highlighted Enabling safe building evacuation in case of an accident, a bomb threat etc. 9

10 Requirements Good visibility of the emergency exit signs has to be guaranteed also with: bright surroundings (with daylight, general lighting) existence of other luminous signs After all, not all emergencies are connected with a power failure, for example in cases of evacuation of a building resulting from accidents or bomb threats. Photometric requirements on the exit signs DIN and ISO : L m 500 cd/m² (white surface) for use in light surroundings. 500 cd/m² 100 cd/m² 10

11 Requirements Device related standards EN (Luminaires: General requirements and tests ) EN (Luminaires: Particular requirements. Luminaires for emergency lighting) EN 1838 (Lighting applications: Emergency lighting) ISO 3864 / ISO 7010 (Graphical symbols - Safety colors and safety signs) IEC / EN (Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps (Annex J) IEC / EN (Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules) IEC / EN (DC or AC supplied electronic control gear for LED modules Performance requirements IEC / EN (Automatic test systems for battery powered emergency escape lighting) Construction related standards DIN VDE (Erection of low-voltage installations - Requirements for special installations or locations - Part 718: Installations for gathering of people) DIN EN (Emergency escape lighting systems) V DIN V VDE (Emergency escape lighting systems) EMC direction 2004/108/EG Electromagnetic interference EN (Limits for harmonic current emissions) EN (Limits and methods of measurement of radio disturbance characteristics of electrical lighting) Electromagnetic immunity EN Equipment for general lighting purposes. EMC immunity requirements Including e.g. ESD acc. to EN Radiated, radio-frequency, electromagnetic field immunity acc. to EN

12 Luminaire Portfolio

13 Luminaire Portfolio GuideLed Plastic Luminaires Escape Sign Panel Luminaires, LED Aluminium Luminaires Escape Sign Cube Downlights Luminaires with high degree of protection Explosion Protected Luminaires Monitoring Modules, Electronic Ballasts 13

14 GuideLed Up to 70% lower power costs compared to luminaires with fluorescent lamps Minimum service requirement due to high service life of the LEDs (50,000 h) 14

15 GuideLed Escape Sign Luminaires GuideLed New lightguide technology for perfect illumination in line with standards Two viewing distances (20 m and 30 m) for versatile installation types. Special slender design with no visible screw fastenings Highly efficient LEDs for a higher operational safety and especially low power consumption Modular design, snap-on connections Lightguide for perfect illumination Completely even and consistent brightness Illumination in line with DIN / ISO with more than 500 cd/m² on white surface during mains supply operation High efficiency, up to 70% lower power costs compared to luminaires with fluorescent lamps 15

16 GuideLed Escape Sign Luminaires Portfolio Wall mounting Ceiling mounting Surface Recessed Canopy Pendant Recessed Cable, surface Cable, recessed = = = 0,5 m = 1,5 m Suspension length = = = 0,5 m = 1,5 m Suspension length

17 GuideLed Safety Luminaires GuideLed SL With special optics for open area and escape route illumination High spacing through double optics technology and highly efficient high-power LEDs. Up to 27 m from luminaire to luminaire with optics for escape route illumination Up to 12 m from luminaire to luminaire with optics for open area illumination Available for recessed and surface mounting GuideLed FSL Anti-glare illumination ensured by precise micro-prism optics Up to 9 m from luminaire to luminaire with optics for escape route illumination Available for surface mounting or semirecessed mounting Low height of only 36 mm or 14 mm Low operating costs due to low effective power of 4 W only Recessed mounting Surface mounting 17

18 GuideLed Safety Luminaires GuideLed SL Two optics Open area illumination, symmetric optics Escape route illumination, asymmetric optics Portfolio GuideLed SL Open area illumination Escape route illumination Ceiling recessed mounting Ceiling surface mounting Optional bezel allows conversion to square design 18

19 GuideLed Safety Luminaires GuideLed FSL with micro-prism optics Portfolio Precise micro-prism optics ensure antiglare illumination Surface mounting Semi-recessed mounting GuideLed FSL = = 19

20 GuideLed High Bay Luminaires GuideLed High Bay Suitable for mounting heights up to 28 m by narrow beam optics and exceptionally efficient High-Power LEDs Up to 24 m from luminaire to luminaire with optics for escape route illumination Up to 14 m from luminaire to luminaire with optics for open area illumination 20

21 GuideLed High Bay Luminaires GuideLed SL High Bay Two optics Open area illumination, symmetric double lens Escape route illumination, asymmetric double lens Portfolio GuideLed SL High Bay Open area illumination Escape route illumination Ceiling recessed mounting Ceiling surface mounting

22 Illuminance of 5 lx for Safety Equipment Requirements of EN 1838: illuminance of 5 lx for safety equipment Acc. to EN1838 the required level of illuminance is 5 lx at first aid stations all fire fighting equipment and all alarm devices Lighting is required near each safety equipment, near generally means a distance of no greater than 2 meters, measured horizontally GuideLed SL and CGLine+ have special optics to guarantee the required illuminance of 5 lx vertically over a wide area Hence mounting at heights of up to 5.6 m, and a breadth of illumination of up to 2.8 metres, are possible. 22

23 Illuminance of 5 lx for Safety Equipment GuideLed SL 13051, CG-S Unobtrusive design through optics integrated in the luminaire Special asymmetric optics for illumination of 5 lx vertically for first aid stations, fire fighting equipment and safety equipment acc. to EN 1838 Hence mounting at heights of up to 5.6 m Breadth of illumination of up to 2.8 meters GuideLed SL 5 lx Recessed mounting Surface mounting

24 Plastic Luminaires with LED Technology Style LED CG-S Up to 48% energy savings Minimum maintenance required due to high service life of the LEDs (over 50,000 hours) IP54 optionally available LED upgrade kits to replace the existing fluorescent tube as light source 24

25 Plastic Luminaires with LED Technology Style LED CG-S Single-sided with screen printed pictogram Double-sided with screen printed pictogram Safety luminaire for ceiling recessed mounting Single-sided with pictogram foil set Three-sided compact luminaire with pictogram foil set Compact safety luminaire for wall and ceiling mounting 25

26 Plastic Luminaires with LED Technology Style LED Upgrade Kit 1 For single-sided exit signs 3 x High Power LEDs with specialized LED-optics Style LED Upgrade Kit SL For escape route lighting 3 x High Power LEDs with specialized LED-optics Style LED Upgrade Kit 2 For double sided exit signs and luminaires 51011/ x High Power LEDs T5-8W LED 26

27 Plastic Luminaires with LED Technology Style Variant LED CG-S LED CG-S Single-sided with screen printed pictogram LED CG-S Double-sided with screen printed pictogram 27

28 Plastic Luminaires: Fluorescent Lamp Style Style Variant Versatile types of application via matched modular elements 28

29 Plastic Luminaires 8W Style CG-S Optional Screen printed pictogram Screen printed pictogram Pictogram foil set Pictogram foil set Single-sided compact luminaire Three-sided compact luminaire with with pictogram foil set pictogram foil set Safety luminaire for recessed ceiling mounting Compact safety luminaire for wall and ceiling mounting 29

30 Plastic Luminaires 8W Style accessories Suspension set Wall bracket Chain fastening Variable mounting Modular design allows versatile mountings Compatible accessories also available Standard quick-mounting set for all luminaires ensures maximum flexibility Suspension set with 90 angle Quick-mounting set Wire guard Luminaire with IP54 cover 30

31 Plastic Luminaires 8W SV EURO 11 / SV EURO 21 (Style Variant) Optional SV EURO 11 Pictogram foil set SV EURO 21 Pictogram foil set 31

32 Escape Sign Panel Luminaires, LED SpiritLED, Brillant LED, 1903 LED Uniform illumination and elegant transparent design for optimum integration into the sophisticated interior design For recessed ceiling, parallel wall, pendant and wall bracket mounting LED luminaires with minimized power consumption and low maintenance effort due to a long service life 32

33 Escape Sign Panel Luminaires, LED SpiritLED 16 / SpiritLED 28 CG-S Exclusive Exit sign luminaire with LED technology Frameless design with pictogram integrated in acrylic glass * * Recessed ceiling mounting kit: IP20 SpiritLED 16 SpiritLED 28 33

34 Escape Sign Panel Luminaires, LED Brilliant LED CG-S Exclusive Exit sign luminaire with LED technology Frameless design with pictogram integrated in acrylic glass Product Portfolio Parallel wall mounting Wall bracket mounting Ceiling surface mounting Ceiling recessed mounting 1503 LED 1603 LED 1703 LED 1803 LED 1504 LED 1604 LED 1704 LED 1804 LED 34

35 Escape Sign Panel Luminaires, LED 1903 LED CG-S LED escape sign panel luminaire for surface-mounting with minimized rectangular housing form Suitable for wall or ceiling mounting 90 wall mounting achieved via special pictogram panel Available in 2 colors (white and aluminum) 35

36 Aluminum Luminaires LED Style Industry Aluminum slim profile enclosure, anodized, with silk-screened pictogram cover 4 different mounting types for a wide range of applications 36

37 Aluminum Luminaires LED CG-S CG-S Aluminum slim profile enclosure, anodized, with silk-screened pictogram cover Available with fluorescent light or LED technology LED Luminaires Fluorescent Luminaires LED LED LED LED

38 Aluminum Luminaires Style Industry Single-sided luminaire with robust die-cast aluminum housing Optional IP54-Set for higher protection for increased tightness requirements indoors or in covered outdoor areas Large selection of screen printed pictogram covers with simple snap mounting Maximum distance of 7 m from luminaire to luminaire with transparent cover For high mounting heights up to 14 m due to narrow distribution reflector 38

39 Aluminum Luminaires Hotel 134 CG-S Exit sign luminaire with three-sided light outlet For horizontal and vertical wall or ceiling mounting Especially suitable for areas with low ceilings due to low construction height Viewing distance: Up to 12 m 39

40 Safety Luminaires LED, 30011, 31011, T, 31012, T Micropoint LED Specialized light distribution for emergency lighting acc. to EN 1838 For low or high mounting positions For wide-area illumination or for escape route lighting Surface and recessed mounted luminaires available 40

41 Safety Luminaires LED For recessed mounting with round or quadratic bezel For ceiling recess diameter of 68 mm, low mounting depth of 30 mm LED, Stainless steel LED, Stainless steel LED, Stainless steel LED, white LED, white LED, white 41

42 Safety Luminaires 3514 LED CG-S Luminaire for surface mounting with round enclosure Screw-less design and special snapping mechanism allows the Luminaire to be opened and closed easily and safely Unobtrusive appearance with 135 mm diameter and low profile of only 38 mm 42

43 Safety Luminaires 30011, 31011, (max. 10W) T (narrow beam distribution) 30011, 31011, T Enclosure made of sheet steel with mounting clips for clamping range 0-33 mm Polished aluminum reflectors 31012, T T (narrow beam distribution) Safety luminaire for surface ceiling mounting, enclosure made of aluminum, matt varnished Polished aluminum reflectors 43

44 Safety Luminaires 8011 CG-S Safety luminaire for ceilings with thickness of up to 40 mm Enclosure made of sheet steel, coated bezel Structured plastic cover 44

45 Safety Luminaires Micropoint 2 Round safety luminaire for recessed mounting 2 different optics (symmetrical and asymmetrical) Up to 21 m from luminaire to luminaire with optics for escape route illumination Up to 10 m from luminaire to luminaire with optics for open area illumination 45

46 Safety Luminaires Step light LED CG-S Aluminum die-cast enclosure, suitable for recessed mounting High IP65 protection class Optimized step illumination achieved through integrated lens optic in the cover Developed for applications where people are situated in deeper positions for example lecture halls. A special optical arrangement avoids blinding those facing the audience. Four adjustable levels of brightness to adapt to the ambient brightness 46

47 Exit Cubes 33022, LED dklk 23 RZ 3-sided escape sign luminaire Suitable for large rooms Robust design Specialised explosionproof luminaire available 47

48 Exit Cubes LED CG-S (20 m), LED CG-S (40 m) Solid exit cubes made of polycarbonate Robust design with impact-resistance of IK07 Easy and flexible mounting options with space to land cables: LED CG-S: Wall mounting (bracket) und ceiling mounting (direct, cable or chain) LED CG-S: Ceiling mounting (direct or with chain) 48

49 Exit Cubes dklk 23 CG-S Explosion protected escape sign cube Enclosure made of reinforced polyester Marking acc. to RL 94/9/EG: II 2 G / II 2 D Available with exlink or Ex-d fitting 49

50 IP65: Protection against dust and water Atlantic LED, i-p , Alfalux High level of protection of IP 65 Robust enclosure made of die-cast aluminum and impact-resistant polycarbonate covers UV-resistant materials 50

51 IP65: Protection against dust and water Atlantic LED LED emergency luminaire with high protection class (IP65) for indoor and outdoor use Robust construction from aluminum die-cast and high impact resistant cover made of polycarbonate Suitable for use in food processing industry acc. IFS Minimum service requirement due to high service life of the LEDs (50,000 hours) Atlantic LED R, Atlantic LED O Outdoor Wall Atlantic LED D Atlantic LED S High spacing by double optics technology and highly efficient HighPower LEDs Atlantic LED R for escape route illumination Atlantic LED O for anti-panic / open area illumination 51

52 High Bay Luminaires, IP65 Atlantic LED High Bay LED safety luminaire with high protection class (IP65) for indoor and outdoor use, for use in operating areas with fire hazard or in food processing industry acc. IFS Robust construction from aluminum die cast and high impact resistant cover made of polycarbonate Suitable for mounting heights up to 28 m by narrow beam optics and exceptionally efficient High Power LEDs Atlantic LED R HB CG-S Atlantic LED O HB CG-S 52

53 IP65: Protection against dust and water i-p65 LED Escape Sign Luminaire High protection class (IP65), wall and ceiling mounting Specialized, robust construction suitable for application outside or areas with high pollution i-p65 LED Safety Luminaire i-p65 S i-p65 D High protection class (IP65), wall and ceiling mounting Specialized, robust construction suitable for application outside or areas with high pollution Available with 2 different optics (symmetrical and asymmetrical) i-p65 E, i-p65 O 53

54 IP65: Protection against dust and water 83022, Robust construction from aluminium die-cast with powder coating (UV stabilized) High impact resistant (IK08) diffuser made of UV stabilized polycarbonate Two waterproof cable entries (IP67) and double terminal for through-wiring Quadratic safety luminaire with high protection class (IP65) for indoor and outdoor use Sticker set optional Round safety luminaire with high protection class (IP65) for indoor and outdoor use 54

55 High Bay Luminaires, IP65 Alfalux LED LED emergency luminaire with high ingress protection class (IP65) for both indoor and outdoor use Both narrow and wide-beam reflector technology, suitable for escape route and large area emergency lighting Minimum service requirement due to high service life of the LEDs (50,000 hours) Ideal for mounting heights up to 19 m (escape route lighting: Alfalux LED E CG-S) or 10 m (room illumination: Alfalux LED O CG-S) Alfalux LED E CG-S Alfalux LED O CG-S 55

56 Explosion Protected Luminaires EXIT, dklk23, ellk 92018/ /58 Individually monitored safety luminaires with CEAG central battery systems / CG-S Technology Approved for explosive areas with gas explosion-hazard zones 1 and 21 as well as dust explosion-hazard zones 2 and 22 High protection class Robust housing for industrial applications 56

57 Explosion Protected Luminaires ellk 92018/ /58 CG-S Reduced battery capacity due to single lamp operation during DC power supply Enclosure made of reinforced polyester ellk 92018/18 (2 x 18 W) ellk 92036/36 (2 x 36 W) ellk 92058/58 (2 x 58 W) 57

58 Explosion Protected Luminaires dklk 23 CG-S Explosion protected exit sign cube Labelling acc. RL 94/9/EG: II 2 G / II 2 D Available with exlink or Ex-d fitting dklk 23 dklk 23 mit exlink Exit Cube EXIT CG-S Explosion protected escape sign luminaire with LEDs Minimum maintenance cost with high LED service life 58

59 Monitoring Modules, Electronic Ballasts V-CG-S, -S2 -SE, -SB, -SUW, CG-K 4 EVG... V-CG-S, N-EVG... V-CG-S, V-CG-SLU, -SLS, -SLR Shortened inspection effort due to CEWA GUARD technology, allowing automatic function monitoring of up to 20 luminaires per circuit Reduced installation cost with STAR technology. Freely programmable mixed operation of the switching modes per luminaire in one circuit without data bus Avoidance of installation failures due to mains connection being protected against polarity reversal Low operating costs due to decreased standby losses ENEC certified by independent test center 59

60 Monitoring Modules, Electronic Ballasts Portfolio Monitoring modules V-CG-S, V-CG-S2 V-CG-SB.1 V-CG-SUW V-CG-SE CG-K 4 Electronic ballast and monitoring module in one housing EVG V-CG-S N-EVG V-CG-S LED supply and monitoring module in one housing V-CG-SLU V-CG-SLS V-CG-SLR 60

61 Monitoring Modules V-CG-S, V-CG-SE, V-CG-SB, CG-K 4 Low operating costs due to decreased standby losses < 0.5 W Minimized dimensions on the basis of conventional T5 EVG cross section (H x B: 21 x 30 mm) for an eased mounting in narrow luminaires No protective conductor connection. Suitable for use in luminaires with insulation class I or II Suitable for mounting in multiple positions (horizontal or sidewise upright) Enlarged ambient temperature range V-CG-S, V-CG-S2 V-CG-SE V-CG-SB.1 CG-K Connected load: W (V-CG-S) 1,5-30 W (V-CG-S2) Connected load : W Separate control input for a parallel switching on-site with positive or inverted logic Universal monitoring module for all single lamp DALI electronic control gears (functional earth for DALI- EVGs required) Connected load: W (V-CG-S) 1,5-30 W (V-CG-S2) Safe galvanic isolation of the bus systems 61

62 Monitoring Modules Connection example V-CG-S, V-CG-S2 V-CG-SK V-CG-SB.1 Functional earth for DALI-EVGs required 62

63 Monitoring Modules V-CG-S, V-CG-S2 Low operating costs due to decreased standby losses < 0.5 W Minimized dimensions on the basis of conventional T5 EVG cross section (H x B: 21 x 30 mm) for an eased mounting in narrow luminaires Without protective conductor connection. For the use in luminaires with insulation class I or II Avoidance of installation failures due to a mains connection being protected against polarity reversal Enlarged ambient temperature range Universal monitoring module for loads W (V-CG-S) and 1,5-30W (V-CG-S2) Avoidance of installation failures due to a mains connection being protected against polarity reversal 63

64 Monitoring Modules V-CG-SE Separate control input for a parallel switching on-site with positive or inverted logic Without protective conductor connection. For the use in luminaires with insulation class I or II Enlarged ambient temperature range Low operating costs due to decreased standby losses < 0.5 W Minimized dimensions on the basis of conventional T5 EVG cross section (H x W: 21 x 30 mm) for an eased mounting in narrow luminaires Variable mounting possibilities for different mounting positions (horizontal or sidewise upright) Avoidance of installation failures due to a mains connection being protected against polarity reversal positive logic inverted logic 64

65 Monitoring Modules V-CG-SB.1 Universal monitoring module for all single lamp DALI electronic control gears Variable mounting possibilities for different mounting positions (horizontal or sidewise upright) Avoidance of installation failures due to a mains connection being protected against polarity reversal Enlarged ambient temperature range Low operating costs due to decreased standby losses < 1.0 W Minimized dimensions on the basis of conventional T5 EVG cross section (H x W: 21 x 30 mm) for an eased mounting in narrow luminaires Safe galvanic isolation of the bus systems (emergency lighting / mains lighting during emergency operation) Adjustable luminous flux relation in DC mode in steps between 10 % and 100 % 65

66 Monitoring Modules CG-K 4-400W Low operating costs due to decreased standby losses < 0.5 W Minimized dimensions on the basis of conventional T5 EVG cross section (H x B: 21 x 30 mm) for an eased mounting in narrow luminaires Without protective conductor connection. For the use in luminaires with insulation class I or II Variable mounting possibilities for different mounting positions (horizontal or sidewise upright) Enlarged ambient temperature range Avoidance of installation failures due to a mains connection being protected against polarity reversal Separate control input for a parallel switching on-site with inverted logic Universal monitoring modules for loads W inverted logic 66

67 Monitoring Modules V-CG-SUW Avoidance of installation failures due to a mains connection being protected against polarity reversal Universal monitoring modules for loads W Enlarged ambient temperature range Integrated change over unit for parallel connection of an external power source Connection example 67

68 Monitoring Modules The files are available at Products/Centrally Supplied Luminaires/Interfaces & Ballasts/Monitoring Interfaces/V-CG-S/Resources 68

69 Electronic Ballasts EVG V-CG-S Low operating costs due to decreased standby losses < 0.5 W No protective conductor connection. Suitable for use in luminaires with insulation class I or II Electronic ballast combined with CG-S Technology EVG 13.3 V-CG-S T16/T5 4,6,8,13 W TC-SEL 5,7,9,11 W TC-DEL 10,13 W TC-TEL 13 W EVG 18 V-CG-S T26/T8 18 W TC-F 18 W TC-L 18 W EVG 18C V-CG-S TC-DEL 18 W TC-TEL 18 W 69

70 Electronic Ballasts N-EVG V-CG-S Reduced battery capacity / -costs by adjustable luminous flux of % in DC-operation Conventional T5 ECG cross section (H x W: 21 x 30 mm) With automatic lamp wattage detection and optimal operation of the lamp acc. to IEC-standard Automatic re-engagement after lamp exchanging T5 types: N-EVG 14/21/28/35 W V-CG-S N-EVG 24/39 W V-CG-S T8 types: N-EVG 36 W V-CG-S N-EVG 58 W V-CG-S N-EVG 49 W V-CG-S N-EVG 54 W V-CG-S N-EVG 80 W V-CG-S 70

71 LED Modules V-CG-SLU (Universal) Low operating costs due to decreased standby losses < 0.7 W Minimized dimensions on the basis of conventional T5 EVG cross section (H x B: 21 x 30 mm) for an eased mounting in narrow luminaires No protective conductor connection. Suitable for use in luminaires with insulation class I or II Suitable for mounting in multiple positions (horizontal or sidewise upright) V-CG-SLU 350 Output current : 350 ma (constant current) For 1-8 LEDs, series connection, 9.8 W max. V-CG-SLU 490 Output current : 490 ma (constant current) For 1-4 LEDs, series connection, 6.9 W max. V-CG-SLU 700 Output current : 490 ma (constant current) For 1-4 LEDs, series connection, 6.9 W max. 71

72 LED Modules V-CG-SLS (Small) Low operating costs due to decreased standby losses < 0.5 W Minimized dimensions on the basis of conventional T5 EVG cross section (H x B: 21 x 30 mm) for an eased mounting in narrow luminaires No protective conductor connection. Suitable for use in luminaires with insulation class I or II Suitable for mounting in multiple positions (horizontal or sidewise upright) V-CG-SLS 350 Output current : 350 ma (constant current) For 1-4 LEDs, series connection, 4.62 W max. V-CG-SLS 500 Output current : 500 ma (constant current) For 2 LEDs, series connection, 3.2 W max. V-CG-SLS 28 Output current : 28 V DC (constant voltage) For LED strip with built-in current control for 28 V DC and max. 110 ma, 3.1 W max. 72

73 LED Modules V-CG-SLS (Small) Low operating costs due to decreased standby losses < 0.5 W Minimized dimensions on the basis of conventional T5 EVG cross section (H x B: 21 x 30 mm) for an eased mounting in narrow luminaires No protective conductor connection. Suitable for use in luminaires with insulation class I or II Suitable for mounting in multiple positions (horizontal or sidewise upright) V-CG-SLS 501 Output current : 500 ma (constant current) For 1 LED, 2,0 W max. V-CG-SLS 701 Output current : 700 ma (constant current) For 1 LED, 2,7 W max. 73

74 LED Modules V-CG-SLR (Round) Low operating costs due to decreased standby losses < 0.5 W Minimized height of the luminaire due to flush-mounted installation of the module V-CG-SLR 350 Output current : 350 ma (constant current) For1-3 LEDs, series connection, 4.2 W max. V-CG-SLR 28 Output current : 28 V DC (constant voltage) For LED strip with built-in current control for 28 V DC and max. 110 ma, 3.1 W max. 74

75 LED Modules Contact protection with external mounting Flexible use for different module sizes due to universal feeder Built-in strain-relief ensures safe installation V-CG-SK Fastening clip V-CG-S V-CG-SB V-CG-SLU 700 V-CG-SLS

76 CEAG Notlichtsysteme GmbH, Senator-Schwartz-Ring 26, D Soest 76