Console-mounted winch model LB

Transcription

1 Hoisting Equipent Manual winches Console-ounted winch odel LB Originally developed as offroad winch the console-ounted winch odel LB is used today for a variety of lifting and pulling applications. Light weight robust staped steel housing. Spur gear drive for optial efficiency and cofortable handling. Autoatic load pressure brake for save holding of the load in any position. An unintentional brake release is prevented. All parts are zinc-plated for increased corrosion protection, dru with additional special coating. Easy and quick ounting to consoles, even under lifting conditions. Options Stainless steel version (at ) for increased corrosion protection. Free wheeling device for a quick anual unrolling of the unloaded. Variable with adjustable handle. Foldable with tiltable handle for use in confined spaces. v] Option: Foldable with tiltable handle for use in confined spaces. Option: Variable with adjustable handle. stainless steel version 900

2 Hoisting Equipent Manual winches v?zr=. siltmji Ltlstu Technical data odel LB Model Art.-No. Zinc-plated version Art.-No. Free wheeling device Art.-No. Stainless steel version diaeter ax. effort LB 150 VZ * LB 350 VZ * LB 650 VZ * LB 900 VZ/ARA * LB1200VZ/ARA " LB 250 VA * LB 650 VA * LB 900 VA * 'recoended : DIN 3060 FE-znk 1770 sz-spa "recoended : DIN 3069 SE-znk 2160 sz-spa Diensions odel LB Model LB150VZ LB 350 VZ LB 650 VZ LB 900 VZ LB 900 ARA LB1200VZ LB 1200 ARA LB 250 VA LB 650 VA LB 900 VA Art.-No. Zinc-plated version Art.-No. Free wheeling device Art.-No. Stainless steel version A, B, C, D, E, F G, H, K, /226* 192/226* L, M, N, , P, /303* 293/303* Q, R, S, 'Freewheeling device s Q *-.», 1 J ] ka i> \-\ <3 s 1 1. <3 o p _ Model LB !*4-4-u I V. *j- A s_ "1 - Model LB

3 Hoisting Equipent Manual winches Wall-ounted winch odel SW-W Wall-ounted winches of the SW-W odel range are intended for fixed stationary ounting inside a building. The steel wire is guided to the required suspension point of the load by eans of deflection sheaves. Robust aluiniu housing for odels SW-W 80 and SW-W 125, proven steel plate design for odels SW-W Spur gear drive for optial efficiency and cofortable handling. Direct drive for loads up to 125. The low-noise safety spring brake safely holds the load in every position. Reovable hand for odels SW-W 80 and SW-W 125, foldable for odels SW-W Easy and quick ounting onto walls. Technical data odel SW-W Model Art.-No. Dru diaeter diaeter Useabie Useabie effort SW-W * SW-W * SW-W " SW-W " SW-W " 'recoended : DIN 3055 FE-znk 1770 sz-spa "recoended : DIN 3060 FE-znk 1770 sz-spa Diensions odel SW-W Model SW-W 80 SW-W 125 SW-W 300 SW-W 500 SW-W 750 Art.-No A, B, C, D, E, F, H, , J, K, L, M, , P, ILR J* Ef

4 Hoisting Equipent Manual winches v?zr=. siltmji Ltlstu Wall-ounted winch odel SW-W ALPHA A versatile wall-ounted winch for an easy lifting of loads. Light weight robust staped steel housing and copact design. Spur gear drive for optial efficiency and cofortable handling. lead-offs to all directions. All parts are zinc-plated for increased corrosion protection, dru with additional special coating. Integrated with load pressure brake for safe holding of the load. Easy and quick ounting onto walls. Options Foldable with tiltable handle for use in confined spaces. Variable with adjustable handle. SJ Option: Foldable with tiltable handle for use in confined spaces. Option: Variable with adjustable handle. Technical data odel SW-W ALPHA Model Art.-No. Dru length diaeter* effort ALPHA ALPHA ALPHA ALPHA 'recoended : DIN 3060 FE-znk 1770 sz-spa Diensions odel SW-W ALPHA I For a better guiding of the to the suspension point we recoend the use of sheaves or sheave blocks, see page 83. Model ALPHA 300 ALPHA 500 ALPHA 750 ALPHA 1000 Art.-No A, B, C, D, E, F, G, H, , J, K, feeding ill Viewx M 1:2.5 LP V"" i Fastening screws to be fastened with M12 bolts quality class 8.8 (not included)

5 Hoisting Equipent Manual winches Wall-ounted winch with wor gear drive odel SW-W-SGG The robust anual winches with enclosed wor gear are used in the agricultural industry and in the arine sector. Winch housing with enclosed wor gear and additional load pressure brake of solid casting design for a long service life. The oil bath lubricated wor gear ensures quiet running characteristics. Easy and quick ounting. i Fall arrest blocks for the transportation of persons, see page 271. The ar is adjustable and akes it possible to work faster with sall loads. Technical data odel SW-W-SGG Model Art.-No. Dru diaeter diaeter* effort SGG SGG SGG 'recoended : DIN 3060 FE-znk 1770 sz-spa Technical data odel SW-W-SGG Model SGG 250 SGG 500 SGG 750 Art.-No A, B, C, D, E, F, G, H, J, K, L, M, N, , P, Q, R,

6 Hoisting Equipent Manual winches v?zr=. siltmji Ltlstu Wall-ounted winch with wor gear drive odel SW-W-SGO Wall-ounted winch with wor gear drive and load pressure brake for efficient lifting of heavy loads. Housing and drus ade out of robust steel plate. Wor gear drive with additional load pressure brake for safe holding of the load. Roller bearings ensure sooth running of the and increased lifetie of the winch. Second speed for fast lifting of saller loads, resulting in lowest possible handle effort and rapid winding of the (for capacities of 2000 and above). Model SW-W-SGO 1500 Large dru capacity with two outlets. Variable with adjustable handle for capacities up to Easy and quick ounting. Technical data odel SW-W-SGO Model Art.-No. diaeter* effort SGO SGO SGO SGO SGO /16" 9/18" 60 SGO /14" 12/24" 78 SGO /16" 25.2/50.4** 105 'recoended : DIN 3060 FE-znk 1770 sz-spa *l st /2 nd speed Diensions odel SW-W-SGO Model SGO 250 SGO 500 SGO1000 SGO1500 SGO 2000 SGO 3000 SGO 5000 Art.-No A, B, C, D, G, H, J, K, L, M, N, , P, R, S, i 1 L

7 Hoisting Equipent Manual winches i Pfaff winches are not designed for passenger elevation applications and ust not be used for this purpose. Model SW-K GAMMA 500 Model SW-K GAMMA 800 Console-ounted aluiniu winch odel SW-K GAMMA Due to its rugged design, the aluiniu winch is suitable for operation outdoors. Copact aluiniu housing and enclosed sprocket wheel drive. Fro a capacity of 500 with speed increasing ratio for sall loads and quicker winding and unwinding of the unloaded. Spur gear drive for optial efficiency and cofortable handling. Enclosed gear for the protection of parts inside, also for arduous applications. Low-friction shaft sliding bearings for iproved lead-off and a longer service life of the winch. Wide dru for a large capacity with two attachent points. Easy and quick ounting. With integrated safety spring brake syste and reovable. The winches can be operated fro either side. Technical data odel SW-K GAMMA Model Art.-No. diaeter* effort Ratio GAMMA GAMMA /400** :1 14 GAMMA /280** :1 16 'recoended : DIN 3060 FE-znk 1770 sz-spa "load/speed increasing ratio Diensions odel SW-K GAMMA Model GAMMA 200 GAMMA 500 GAMMA 800 Art.-No A, B, C, D, E, F, G, H, L, M, rr r ~ A. X Q I 1. D, C ^^^

8 Hoisting Equipent Manual winches v?zr=. siltmji Ltlstu Copact aluiniu winch with free-wheeling device odel SW-KAL Console-ounted winches are used for superstructures on vehicles and trailers and when lifting and lowering loads. Self-locking wor gear, free-wheeling device for ease of operation. Enclosed gear for the protection of internal parts, also for arduous applications. Low-friction shaft bearings for a longer service life of the winch. Easy and quick ounting. Technical data odel SW-KAL Model Art.-No. Dru 1st layer diaeter diaeter* ax. effort KAL KAL 'recoended : DIN 3060 SE-znk 1770 sz-spa Diensions odel SW-KAL Model KAL 750 KAL 1120 Art.-No A, B, C, D, E, F, G, H, J, K, L, 85 85

9 Hoisting Equipent Manual winches Console-ounted winch odel SW-K LAMBDA (BGVC1) 300 The copact winch for applications on stages, in studios, theatres, etc. State-of-the-art design with galvanized side sections for easy handling. Grooved dru for single-layer winding of the steel. An 18:1 ratio between dru and diaeter increases the service life of the substantially. With spring-loaded pressure roller to prevent the unloaded fro juping off the dru. Gear rated for twice the noinal load. Spur gear drive for optial efficiency and cofortable handling. The fitted safety with two spring brakes acting independently of each other for safe holding of the load in any position. Coplies with the latest accident prevention regulations BGV Cl (DIN 56925) as well as the prototype and safety test (GS-test - tested safety) of the Geran i Pfaff winches are not designed for passenger elevation applications and ust not be used for this purpose. coittee for lifting equipent. Options Dru extension for a larger capacity. Special grooves (several s) Technical data odel Labda (BGVC1) Art.-No. diaeter* effort Ratio : :1 36 'recoended steel : 6 DIN 3069 SE-znk 1960 sz-spa, (breaking load of the in kn) Diensions odel Labda (BGVC1) pressure dru Art.-No A, B, C, D, E, F, G, H, J, K,

10 Hoisting Equipent Manual winches/accessories v?zr=. siltmji Ltlstu, Sheave block for guidance, equipped with ball bearings odel DSRB S Technical data odel DSRB Model Art.-No. Classification FEM/ISO Pulling force in at deflection 90 Pulling force in at deflection 180 diaeter DSRB S 90/ /M / ld/ml / la/m / /M / /M / /M / /M All sheaves are available as an individual coponent on request. Diensions odel DSRB Model 90/4 90/6 145/7 185/8 270/12 400/16 490/20 Art.-No B, C, D, D1, D, E, H, K, L, M/M1, 9/9 9/9 11.5/ /15 18/20 26/30 34/40 S, A / ' ' " " '?fefcith o i \, x u f! 1 \ \ / / \, '?ZJ, 1 c L i = t J L Standard s for Pfaff-silberblau anual winches According to DIN 3060 Article-nubers diaeter Breaking load of in. kn clevis end 4 -DIN DIN DIN DIN DIN 3069* * with increased breaking load for LB 1200 I Additional accessories available on request.

11 Hoisting Equipent Manual winches Manual winch with spur gear drive odel MWS For the operation where no electricity is available or in a dirty environent. Recoended diaeter according to DIN 3060 FE-znk 1770sZ-spa. The is not part of the delivery package. Enclosed gear drive for protection of internal parts, even under tough working conditions. Spur gears on roller bearings, dru on plain bearings. Copact design. Easy and quick ounting onto walls, poles etc. They have a self-locking, anti-kickback and adjustable handle for fast lifting of saller loads, resulting in lowest possible handle effort and rapid winding of the. Autoatic load pressure brake for safe holding and extreely sensitive lowering of the load. Unintentional brake release is prevented even with swinging loads. They are suitable for operation in abient teperatures of -20 C up to + 40 C. Option Corrosion resistant version I Pfaff winches are not designed for passenger elevation applications and ust not be used for this purpose. ^^^

12 Hoisting Equipent Manual winches E^Tr! silbgrblau Technical data odel MWS Model EAN-No. Crank effort Ratio Breaking Nuber * diaeter* load of of length layers in. ax. ax. kn MWS 150 * : MWS 300 * : MWS 600 * : MWS 1000 * : MWS 1500 * : 'recoended : DIN 3060 FE-znk 1770 sz-spa Diensions odel MWS Model MWS 150 MWS 300 MWS 600 MWS 1000 MWS 1500 A, B, C, D, E, G, H, J, K, L, M, N, , S, T^ ^31 II Model MWS, capacity 150 Model MWS, capacity ki Model MWS, capacity