Lifting device Type Sulzer /
|
|
|
- Bryce Richard
- 6 years ago
- Views:
Transcription
1 Lifting device Type Sulzer / EN en Installation and Operating Instructions Translation fro original instruction
2 Installation and Operating Instructions for lifting device type Sulzer / Sulzer reserves the right to alter specifications due to technical developents!
3 Table of contents 1 General Introduction Application areas Application liitations Diensions Type designation of the Sulzer lifting device /281 and the coponents Naeplate Security Safety instructions for the operator of the lifting device / Installation of the botto fixing support Installation of the Sulzer lifting device / Appendix: Check list/hints for the check by an expert Installation and operating instructions of the winch (part of the packing of the anufacturer). Instructions for the handling of cheical anchors (part of the packing of the anufacturer). 3
4 1 General 1.1 Introduction These Installation and Operating Instructions and the separate booklet Safety Hints contain basic instructions and safety hints which ust be observed during transport, installation and coissioning. For this reason it is essential that they are read by the installing technician as well as by relevant skilled operators or users. They should also be always available where the unit is installed. Safety Instructions which ight cause danger to life in case of non-observance have been specifically highlighted with the general danger sybol. ATTENTION Appears at safety hints, the non-observance of which could daage the unit or affect its functioning. NOTE Used for iportant pieces of inforation. Illustrations code; e.g. (3/2). The first digit refers to the figure no. and the second digit to the position in that figure. The docuents listed below are integral parts of these installation and operating instructions: Installation and operating instructions for Sulzer lifting device Declaration of confority for Sulzer lifting device /281 as defined by: Machinery Directive 2006/42/EC. Check list for the expert inspections of winches, pulling and lifting devices. The docuents listed below are also substantial parts of these instructions: Operating instructions for the winch. Instructions for the handling of cheical anchors. 1.2 Application areas The Sulzer lifting device /281 is suitable to lift and lower subersible ixers anually. It can be rotated 360 ; the boo can be adjusted to the required overhang and lifting capacity by tilting it.h In the working position the lifting device /281 is pushed into a lifting device support which is connected to the building. 1.3 Application liitations The Sulzer lifting device /281 and the lifting device supports are weather proof. Soe of the winches are not and should be stored in a sheltered place when not being used. If the lifting device /281 is operated in aggressive athospere or the wire rope in an agressive liquid they have to be cleaned after operation and ust be checked by an expert in shorter intervals. The axiu allowable loads ust be observed when using the Sulzer lifting device
5 1.4 Diensions The ax. lifting capacity for the different overhangs can be obtained fro the naeplate on the lifting device / R490 Figure 1 Diensions 5
6 1.5 Type designation of the Sulzer lifting device /281 and the coponents Legend 1 Wall fixing support 2 Botto square tube support 3 Square tube ax.6 4 Handle grip 5 Rope winch 6 shackle 7 Stopper clap 8 Rope 9 Botto plate Naeplate Figure 2 Structural design We recoend that you record the data fro the original naeplate on the naeplate illustrated in Fig. 3 below so that you can refer to the data at any tie Sulzer Pup Solutions Gerany GbH DE Lohar, Gerany Type: Hubgerät / Lifting unit 5 kn No.: Baujahr/Year: Tragfähigkeit / Lifting capacity kg bei ax. Ausladung kg at ax. Overkg hanging Legend 1 Type designation 2 Unit nr. 3 Production year 4 Lifting capacity 5 Lifting capacity in [kg] 6 at ax... 7 overhang in [] 8 overhang Figure 3 Naeplate 6
7 2 Security The following standards and regulations have to be observed: DIN T1 and 2 UVV VBG 1, 8, 9, 9a the owner of the lifting device /281 has to ake sure that... These instructions are always available to the operator. The lifting device /281 is only operated by skilled and instructed individuals. The operator is using all required personal protection equipent. The lifting device /281 is checked by an expert before coissioning. (Faultless assebly and installation, ready for work). A written report on this inspection is required. The unit will be checked by an expert at least once a year.(see check list at the end of this booklet) When operating the unit under unfavourable conditions ore frequent checks ay be required. No changes on the unit are to be ade without prior written consent fro the anufacturer. Daages to the unit are iediately repaired and faulty units are not operated. 2.1 Safety instructions for the operator of the lifting device /281 Study Prior installation and operating instructions with care! to any operation, the lifting device /281 has to be checked carefully, including correct guidance in the lifting device support. In case of faults the owner has to be infored iediately and the unit has to be blocked! Make sure no persons are within the working radius of the unit. If required this area is to be blocked by suitable eans. Do Never Use Make Moving The The The not stand under the suspended load! ecxeed the axiu load, related to the actual overhang! suitable sling eleents only (according to VBG UVV 9a)! sure that there is no risk of jaing or catching of the load! huan beings with the lifting device /281 is strictly prohibited! load ust never ove out-of-perpendicular! winch is not to be operated by otors! wire rope ust not be used to sling the load! 7
8 The When load ust always be visible to the operator. If this is not possible, the assistance of a second person is required (Marshal)! winding the wire rope it always has to be held tight! If the rope ist wound not tight enough on the winch dru, the breaking load of the rope can be reduced draatically! An additional weight attached to the end of the wire rope will reduce the risk of loose winding. Attaching the wire rope to the winch dru is to be done according to the instructions of the winch anufacturer! At least three turns of wire rope ust reain on the winch dru when the load is in its lowest position! When operating the unit all bolts have to be secured by security pins! Use your safety helet, gloves and safety shoes! Connect the equipotential bonding! These hints are only supplientary to the regulations of DIN and the regulations for the prevention of accidents fro the authorities VBG 8, VGB 9a. Furtherore any local regulations are to be observed! 3 Installation of the botto fixing support NOTE Please find the necessary diension for installation at chapter 1.4 Diensions First check all parts whether they are correct and all available according to the parts list. Inspection of the installation site according to the drawings: a. Check the installation site regarding stability (in. B25). b. Check the installation place regarding suitability for the safe operation of the lifting device /281. Take care of correct conditions for anchoring, e.g: Depth of holes Drill diaeter Edge spacings Working teperature Expiration date of plastic ortar Curing tie Fastening torque of nuts - - Nut lockings Before first operation of the lifting device /281 the support installation has to be inspected by an expert. A written report on this inspection is required. 8
9 4 Installation of the Sulzer lifting device / Figure 4 Installation 9
10 Appendix: Check list / Hints for check by an expert 1. Manufacturer: Sulzer Pup Solutions Gerany GbH, Scheiderhöher Str D Lohar 2. Year of production: 3. Serial no.: 4. Lifting capacity: 5. Manufacturer of rope winch: Type: 6. Lifting rope: Diaeter: Ø Min. breaking load: kn 7. Check before first operation: On: By: Recur checks (at least once a year) Date Result Signature On Repaired By Hints for checks by an expert 1. Are the naeplate, load rating and warning labels coplete and readable? 2. Check the post, boo and lifting device supports regarding daages, wear, corrosion and deforation. 3. Check the load bearing eleents regarding sooth function (post, pulley). 4. Check all bolts regarding wear and deforation. Are all securing pins in the bolts? 5. Check the wire rope regarding daages, corrosion and correct diensions. 6. Winch: Inspection according to the instructions of the anufacturer. 7. Installation of the lifting device supports: Check regarding daage on the load bearing parts of the building, corrosion, deforation and tight fastening of the base parts. 8. Use your personal protective equipent ( PPE ). 10
11 11
12 I Sulzer Pup Solutions Gerany GbH I Scheiderhöher Straße 30-38, D Lohar, Gerany I I Tel I Fax I I
Operating instructions torque limiters ECE, ECG, ECI, ECR, ECH
Operating instructions torque liiters ECE, ECG, ECI, ECR, ECH Contents 1. Assebly drawings 2. Construction and function 2.1 Construction 2.2 Function 3. Torque liiter design 3.1 Choosing the right torque
Electric winch model RPE
Electric winch odel RPE 250-1000 Winches series RPE and RPA are designed explicitly for perforance, efficiency and safety and offer any advantages and options. RPE's and RPA's extreely copact, practical
Middle Bhotekoshi Hydroelectric Project (102 MW)
Tender Docuents Lot 1 Addendu No. 1 MADHYA BHOTEKOSHI JALAVIDYUT COMPANY LIMITED Middle Bhotekoshi Hydroelectric Project (102 MW) ADDENDUM NO 1 Additional Inforation (for Section 12 Changes to Volue 3
MC Line. MC 96 Duty-cycle crane
MC Line MC 96 Duty-cycle crane Diensions basic achine 2040 450 50 2990 6040 3050 4700 000 3980 530 40 7280 020 R 4700 Operating weight 8300 with HD undercarriage,,000- triple-grouser track shoes, uppercarriage
Manual winches Console-mounted winch 2 Wall-mounted winch 4~7 Console-mounted aluminium rope winch 8~10 Sheave block 11
Index Manual winches Console-ounted winch 2 Wall-ounted winch 4~7 Console-ounted aluiniu rope winch 8~10 Sheave block 11 Electric & Pneuatic winches Electric winch SW-E BETA Proline 12~14 Sheave block
145.2 ENGLISH. Courtesy of Crane.Market
5. ENGLISH Standards Optionals Hexagonal profile boos "STAND UP OPERATOR" platfor Rack rotation Swing-up stabilizers, hydraulically activated ETL (Effer Twin Links) Winch Sequence valve Crane adjustent
ENGLISH. Courtesy of Crane.Market
ENGLISH Standards Optionals Hexagonal profile boos Wind & Drive Crane foldable with fly-jib without disounting winch coponents ETL (Effer Twin Links) Swing-up stabilizers, hydraulically activated Sequence
FLEXSTEEL. Selection chart
FLXSTL 0108 FLXSTL Selection chart Fig. 1 Single disc pack Fig. 1 Double disc pack asic shape in S Flexsteel is a zero backlash coupling which uses a disc pack ade of stainless spring steel as a drive
FBP 24 / FBP 26. Truck-mixer pump. Nominal volume
FBP 24 / FBP 26 Truck-ixer pup Vertical reach Concrete output ax. Pressure on concrete ax. Noinal volue 23.8 / 25.8 61 3/h 71 bar 7 3 78 ft / 85 ft Truck-ixer pups FBP 24 and FBP 26 Flexible transport
Hydraulic Crawler Crane
Hydraulic Crawler Crane Model : S00G Max. ifting Capacity : 00 t x. Max. Crane Boo ength : Max. uffing Jib Cobination: + CONFIGURATION STD ong Boo SH uffing Boo Max. ifting Capacity: 113. etric tons x.0
Schiebeleitern. ZARGES push-up and rope-operated ladders highly flexible in the best sense of the word.
P ZARGES push-up and rope-operated ladders highly flexible in the best sense of the word. ZARGES push-up and rope-operated ladders are ideal for accessing high-level workstations up to 17. Due to the adjustent
submersible dewatering pumps eng 50 Hz
subersible dewatering pups eng Hz Welcoe to PUMPEX, one of the world s leading anufacturers of subersible dewatering pups. Dedicated Partner Pupex is a coplete equipent supplier for professional dewatering
PRODUCT INFORMATION. PowerCEMS100 EFFICIENT SYSTEM FOR CONTINUOUS EMISSION MONITORING IN POWER PLANTS. Customized analyzer systems
PRODUCT INFORMATION PowerCEMS100 EFFICIENT SYSTEM FOR CONTINUOUS EMISSION MONITORING IN POWER PLANTS Custoized analyzer systes POWERCEMS100: CERTIFIED QUALITY SIMPLE INSTALLATION AND OPERATION The PowerCEMS100
Console-mounted winch model LB
Hoisting Equipent Manual winches Console-ounted winch odel LB 150-1200 Originally developed as offroad winch the console-ounted winch odel LB is used today for a variety of lifting and pulling applications.
329D/329D L Hydraulic Excavator Dimensions All dimensions are approximate.
Diensions All diensions are approxiate. 2 3 1 9 7 8 6 4 5 10 Boo Options Reach 6.15 Mass 5.55 Stick Options R3.2CB2 R2.65CB2 M2.5DB 1 Shipping height** 3180 3190 3250 2 Shipping length 10 410 10 420 9860
IMPORTANT! Electric Tiller/Cultivator. Safety Instructions All Operators Must Read These Instructions Before Use SAVE THESE INSTRUCTIONS
Electric Tiller/Cultivator Model No. TJ600E For No. SJ-TJ600E-880E A Division of Snow Joe, LLC IMPORTANT! Safety Instructions All Operators Must Read These Instructions Before Use Always follow these safety
igubal Pillow Block Lifetime calculation, configuration and more igubal pillow block
igubal Pillow Block Maintenance-free, dry running High tensile strength High endurance strength Can be used in cobination with E series rod ends Lightweight 801 igubal igubal Pillow Block The igubal bearings
metric BOlTs: 42 ft/lbs.
2-12 TP20112, rev 7 Older-Jeep & Jeep CJ BOlT TORQue specifications standard BOlTs: size grade Torque 5/16 5 20 ft/lbs. 3/8 5 35 ft/lbs. 7/16 5 56 ft/lbs. 1/2 5 85 ft/lbs. etric BOlTs: size 8 10 12 14
DOZER MACHINERY. Reliability. Strength. Advantage. STANDARD EQUIPMENT SUPPLEMENTARY EQUIPMENT. EQUIPMENT for operation in arctic conditions
Reliability. Strength. Advantage. STANDARD EQUIPMENT Adjustable suspension seat Air cleaner Cab heating syste fan Decelerator Horn Front tow hook protection Hydraulic unit for track tension echanis Lighting
TGBgroup. Slewing Rings
TGBgroup Slewing Rings WWW.TGB-GROP.COM 1 2 3 TGB Group With over 20 years of experience in bearings, gears and power transission, the TGB Group has becoe a global leader in the developent and production
312E Hydraulic Excavator
Diensions All diensions are approxiate. 3 9 1 7 8 6 2 4 5 10 Reach Boo 4.65 (15'3") Stick R3.0 R2.8 R2.5 (9'10") (9'2") (8'2") () () () 1 Shipping Height* 2980 (9'9") 2980 (9'9") 2980 (9'9") Shipping Height
MULTI-PURPOSE DREDGERS
MULTI-PURPOSE DREDGERS ACHIEVING THE LOWEST COST & ENVIRONMENTAL IMPACT PER M3 Dredge Yard +31 85 3035 866 www.dredgeyard.co MULTI-PURPOSE DREDGERS QUALITY FROM START TO FINISH Dredge Yard designs and
SRC 350 ROUGH-TERRAIN CRANE 35 metric tons capacity
SRC 350 ROUGH-TERRAIN CRANE 35 etric tons capacity PAGE 01 SRC 350 ROUGH-TERRAIN CRANE The international product developed jointly by the experts of the two countries based on the Sino-Aerican R&D platfor;
No accidents reported to CARFAX. No other damage reported to CARFAX. Types of owners: Personal lease, Personal. Last reported odometer reading
For Personal Use Only Vehicle Inforation: 2009 MERCEDES-BENZ C300 4 MATIC VIN: WDDGF81X99R072949 SEDAN 4 DR 3.0L V6 F DOHC 24V GASOLINE ALL WHEEL DRIVE Standard Equipent Safety Options No accidents reported
SAC1000 SANY All Terrain Crane 100 Tons Lifting Capacity
SAC1000 SANY All Terrain Crane www.sany.co.cn 02 03 Highlights Highlights Outstanding Lifting Capacity Efficient Power Syste Highly reliable with low fuel consuption and easy aintenance.single-engine power
ips Selection of materials PVC-U: Unplasticised Polyvinyl Chloride General properties of PVC-U
Selection of aterials Unplasticised Polyvinylchloride (PVC-U) is one of the oldest and ost widely used plastics for piping systes worldwide. It is a highly versatile aterial that is used for both pressure
HOISTS WINCHES CRANES
HOISTS WINCHES CRANES EN ISO 00:000 Certified Copany Your direct link: prices: data sheets drawings, etc.: www.hadef.co/prices www.hadef.co/data Progra Electric and Pneuatic Chain Hoists and Winches Hoists
FINAL. E75C SR E75C SR E85C MSR MONOBOOM OFFSET BOOM SWING BOOM 42 kw - 56 hp 7540 kg kg 8270 kg m 3
FINAL ENGINE POWER MAX OPERATING WEIGHT* BUCKET CAPACITY MONOBOOM OFFSET BOOM SWING BOOM 42 kw - 56 hp 7540 kg 8.430 kg 8270 kg 0.23-0.35 3 * With long ar and 450 rubber shoes OUTSTANDING EFFICIENCY ULTRA
BM14200 Roller Brake Tester
BM14200 Roller Brake Tester The perfect choice if you are looking for... Roller Brake Tester designed to last. The ost coprehensive Load Siulation Syste Progra and EBS Diagnosing tool. Roller Brake Tester
Magnetic drive pumps MX series
CATE 62 Magnetic drive pups MX series Withstands difficult operating conditions and offers high efficiency The MX Series represents the latest state of the art design in plastic agnetic drive pups. With
09/2012 Submersible Pumps
GM Subersible Pups 7 7 GM Subersible Pups GMV Subersible pups with vortex ipeller in cast iron EN-GJL- pag. GMVS Subersible pups with vortex ipeller in cast iron with polyurethane coating pag. 7 GM GMN
CONTENTS. JDN Air Hoists mini 2-3
GENERAL ATALOGUE ONTENTS ONTENTS JN Air Hoists ini - JN Air Hoists PROFI The odular syste at a glance 5 PROFI 05 TI up to TI PROFI TI up to 0 TI 7 PROFI 5 TI up to 0 TI 8 JN Air Hoists M Series 9 JN Trolleys
308C CR. Hydraulic Excavator. 4M40E1 Engine
308C CR Hydraulic Excavator 4M40E1 Engine Flywheel Power 41 kw/54 hp Operating Weight with 2470 blade, one-piece boo, 2210 stick, 600 shoes and 0.6 3 bucket 8040 kg Maxiu Drawbar Pull 57 kn Swing Torque
Table of contents INFO. Page. General information ATEX Pneumatic chain hoists ATEX Hand chain hoists ATEX Trolleys
427 ale of contents Page General inforation on explosion protection. Soe products fro our standard range have een odified for use in potentially explosive atospheres (areas). he products of this field
Kränzle Catalogue / Program PROFESSIONAL SERIES VALID FROM FEBRUARY 1, Made in Germany.
Kränzle Catalogue / Progra PROFESSIONAL SERIES VALID FROM FEBRUARY 1, 2018 Made in Gerany www.kraenzle.co QUALITY IN ALL AREAS FROM PROS, FOR PROS! Managing director Ludwig Kränzle Copany founder & anaging
QAY220. XCMG For Your Success XUZHOU CONSTRUCTION MACHINERY GROUP IMP. & EXP. CO., LTD ALL TERRAIN CRANE
For ore inforation on XCMG products, dealer services, and industry solutions, visit us on the web at www.xcg.co Jan 1, 2014 All Rights Reserved Materials and specifications are subject to change without
NH 50Hz SEWAGE PUMPS
www.tsuruiuniverse.co NH Hz SEWAGE PUMPS Subersible Sewage Pups TSURUMI UNIVERSE is a new brand of products fro TSURUMI, a leading copany in the field of subersible pups for over 9 years. It has been developed
Doing Our Best to Provide You the Best. Dodge Ram BOlT TORQuE SPECIfICATIONS TP20235,Rev.4. STANDARD BOlTS: metric BOlTS:
Dodge Ra 1500 3-13 TP20235,Rev.4 BOlT TORQuE SPECIfICATIONS STANDARD BOlTS: ETRIC BOlTS: Size grade Torque Size Torque 5/16 5 20 ft/lbs. 8 22 ft/lbs. 3/8 5 35 ft/lbs. 10 42 ft/lbs. 7/16 5 56 ft/lbs. 12
27.1. Stud bolts m. T-keyway nuts m. T-keyway nuts, long. Clamping Technology
27003 Stud bolts DIN 6379, rolled thread, tepered, strength category M 6 - M 12 = 10.9, M 14 - M 24 = 8.8. l 3 l 1 l 2 d 1 27003 d 1 x l 1 l 2 l 3 27003 M 6 x 32 16 9 101 M 6 X 50 30 9 103 M 6 x 80 50
Helium Stand-Up Wheelchair
Heliu Stand-Up Wheelchair Owner s Manual How to contact LifeStand USA Perobil Inc. 300 Duke Drive Lebanon, TN 37090 PH: 800.736.0925 FAX: 800.231.3256 info@perobil.co techsupport@perobil.co CANADA Perobil,
SAC3500 SAC3500 ALL-TERRAIN CRANE 350 TONS LIFTING CAPACITY. Quality Changes the World. Courtesy of Crane.Market SAC3500
SAC30 SAC30 ALL-TERRAIN CRANE 3 TONS LIFTING CAPACITY SAC30 2 SAC30 All-terrAin CrAne COMPANY BRIFE INTRODUCTION SAC30 All-terrAin CrAne COMPANY BRIFE INTRODUCTION SANY Autoobile Hoisting Machinery is
PQS Quality Assurance protocol
PQS Quality Assurance protocol WHO/PQS/E03/PV01-VP2.1 Original: English Distribution: General TITLE: Solar power syste for copression-cycle vaccine refrigerator or cobined refrigerator-icepack freezer
8K Series Pumps Stainless Steel Multistage Centrifugal Pumps
8K Series Pups Stainless Steel Multistage Centrifugal Pups Product Quality, Reliability and Support You Expect www.catpups.co 8K Multistage Centrifugal Pups Designed for long-life and trouble free service,
Translation of the Original operating instructions Lifting device Z 70 /...
Translation of the Original operating instructions Lifting device Z 70 /... Content 1. Lifting device / Correct use according to regulations 2. Basic principles 3. General information 4. Special remarks
Crawler Excavator R 956
Crawler Excavator R 956 Motor: 240 kw / 326 HP Stage IV Operating weight: Backhoe: 51,000 58,150 kg 56,750 57,300 kg Shovel: Bucket Capacity: Backhoe: 1.25 3.30 3 Shovel: 2.50 3.10 3 R 956 Litronic Motor
325B L 330B L 345B L. Ultra-high Demolition
B L 0B L B L Ultra-high Deolition B L 0B L B L Cat turbocharged engine TA 0 TA 7C ATAAC Gross power kw/77 hp 7 kw/ hp kw/ hp Flywheel power kw/8 hp kw/ hp kw/90 hp Operating weight range 0 000 to 0 000
R-620 HYDRAULIC ROTARY RIG. Ground Engineering Equipment
R-620 HYDRAULIC ROTARY RIG Ground Engineering Equipent R-620 HYDRAULIC DRILLING RIG A new odel The R-620 drilling rig on Caterpillar 3.30 C high power odule has been designed to perfor the following jobs:
Type CF FOR THE REDUCTION OF NOISE IN CIRCULAR DUCTS, FLEXIBLE ALUMINIUM CONSTRUCTION
Hoepage > Products > Sound attenuators > Circular silencers > Type CF Type CF FOR THE REDUCTION OF NOISE IN CIRCULAR DUCTS, FLEXIBLE ALUMINIUM CONSTRUCTION Circular silencers, in flexible aluiniu construction,
STANDARD EQUIPMENT OPTIONAL EQUIPMENT
STANDARD EQUIPMENT OPTIONAL EQUIPMENT We build a better future ISO Standard cabin All-weather steel cab with 360 O visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window
LTM Product advantages mobile crane. Max. load capacity: 400 t Max. height under hook: 130 m Max. radius: 100 m. Courtesy of Crane.
Product advantages obile crane Max. load capacity: 400 t Max. height under hook: 130 Max. radius: 100 4 Copact, aneuverable and safe 11 12 t 12 t 16.56 18.45 12 t 12 t 12 t 3 6.23 6.8 9.5 14.00 R 25 12
Railroader A 922 Rail. Operating Weight: 19,900 22,800 kg Engine: 110 kw / 150 HP
Railroader A 922 Rail Operating Weight: 19,900 22,800 kg Engine: 110 kw / 150 HP A 922 Rail Litronic Operating Weight: 19,900 22,800 kg Engine: 110 kw / 150 HP Perforance Copact, flexible Perfect cobination
5/22/2018 CARFAX Vehicle History Report for this 2008 CHRYSLER PT CRUISER TOURING ED: 3A8FY58B68T No accidents reported to CARFAX
This CARFAX Vehicle History Report provided free of charge by: Credit Mundo Inc 19701 Sheran Way Winnetka, CA 91306 (800) 440-7705 Vehicle Inforation: 2008 CHRYSLER PT CRUISER TOURING ED VIN: 3A8FY58B68T249299
Electric wire rope hoists
Electric wire rope hoists ABUS GM wire rope hoists: Quality at your fingertips Type D crab units on double-girder overhead travelling cranes Type E onorail hoist on a type VS pillar jib crane Two type
JDN AIR HOISTS PROFI. Carrying capacities: 250 kg up to 100 t Air pressure: 4 bar or 6 bar STANDARD FEATURES TECHNICAL DETAILS
arrying capacities: 0 up to 0 t Air pressure: or Proven in practice: JN Air Hoists PROFI Series are superior in all places where safety has priority. Unlike electric current, the copressed air power driving
SAC1300S SANY All Terrain Crane 130 Tons Lifting Capacity
SAC1300S SANY All Terrain Crane Max. Lifting Capacity: 130 t Max. Boo Length: 63 Max. Lifting Height: 92.5 www.sanyglobal.co 02 03 Technical Features Technical Features Efficient Power Syste The carrier
MARINE CRANES ENGLISH JULY 2017
MARINE CRANES ENGLISH JULY 2017 OUR MISSION 4 OUR HISTORY 6 OUR SALES AND SERVICE NETWORK 8 STANDARD SUPPLY 10 ACCESSORIES 12 LONG LASTING 14 NO LIMITS 15 EASY WORK 16 RANGE OF APPLICATION 18 FOLDABLE
OUTLINE OF SPECIFICATION FOR 400FT JACK UP RIG (CP400)
1 P a g e OUTLINE OF SPECIFICATION FOR 400FT JACK UP RIG (CP400) 1 General Provisions 1.1 Purpose and Applicability of Platfor This platfor is a non-self-propelled self-elevating drilling rig used for
OPERATING INSTRUCTIONS (Translation) Hoisting crane
1. User Groups Duties Operator Operation, visual inspection Specialist personnel OPERATING INSTRUCTIONS (Translation) Hoisting crane Type 4781.0,25 Assembly, disassembly, repair, maintenance Tests GB Qualifications
Standard Specification for Carbon Steel Wire for Wire Rope 1
Designation: A 1007 07 Standard Specification for Carbon Steel Wire for Wire Rope 1 This standard is issued under the fixed designation A 1007; the nuber iediately following the designation indicates the
312E. Hydraulic Excavator
312E Hydraulic Excavator Engine Drive Engine Model Cat C4.4 ACERT Maxiu Travel Speed 5.5 k/h 3.4 ph Net Power SAE J1349 68 kw 91 hp Maxiu Drawbar Pull 114 kn 25,628 f Gross Power SAE J1995 71 kw 95 hp
7/29/2017 CARFAX Vehicle History Report for this 2014 HYUNDAI SONATA GLS: 5NPEB4AC3EH No accidents reported to CARFAX
Vehicle Inforation: 2014 HYUNDAI SONATA GLS VIN: 5NPEB4AC3EH923874 SEDAN 4 DR 2.4L I4 F DOHC 16V GASOLINE FRONT WHEEL DRIVE Standard Equipent Safety Options No accidents reported to CARFAX No other daage
Cast Iron Submersible Pumps 10" 12" 14"
Cast Iron Subersible ups 1" 1" 14" Subersible ups Cast Iron Subersible ups 5-54 3 /h The FT Series pups have been engineered in a Cast Iron construction for efficient and reliable puping of water for agricultural,
Machine for Industrial Applications LH 24 M
Machine for Industrial Applications LH 24 M litronic` Operating Weight: 23,8 24,3 kg Engine: kw / 43 HP Stage IIIB Technical Data Engine Rating per ISO 9249 Model Type Bore/Stroke Displaceent Engine operation
Type CA FOR THE REDUCTION OF NOISE IN CIRCULAR DUCTS, GALVANISED SHEET STEEL CONSTRUCTION
Hoepage > Products > Sound attenuators > Circular silencers > Type CA Type CA FOR THE REDUCTION OF NOISE IN CIRCULAR DUCTS, GALVANISED SHEET STEEL CONSTRUCTION Circular silencers Type CA for the reduction
OWNER`S MANUAL. Permobil C350. Power Wheelchair
OWNER`S MANUAL UK Perobil C350 Power Wheelchair Where to find Perobil Perobil Office 312 Britannia Office Quarter Waters Meeting Britannia Way BL1 8SW Bolton, United Kingdo Tel: (+44) (0)1484 722 888
VXC4 VORTEX. Submersible pumps. PERFORMANCE RANGE Flow rate up to 2200 l/min (132 m3/h) Head up to 12.2 m
VXC4 Subersible pups VORTEX Sewage water Civil use Industrial use PERFORMANCE RANGE Flow rate up to 2200 l/in (132 3/h) Head up to 12.2 APPLICATION LIMITS axiu iersion depth (with a sufficiently long power
ec700c t 470 hp
Volvo excavators ec700c 68.3 71.7 t 470 hp ALL WORK. ALL THE TIME. [ More profit. ] Powerful Volvo V-ACT engine: efficiently oves ore tons per hour. Industry-leading fuel efficiency. The digging reach,
The Vertical Blinds system
Vertical linds The Vertical linds syste enthin Vertical linds are suitable for a wide range of applications and are characterised by their flexibility, durability and the efficient, versatile solar protection
HPG Gearhead Series. Sizes
HighPerforance earhead for Servootors HP Standard Series,,,, 0, 6 Peak torque N 0N Reduction ratio Single Stage: :1 to 9:1, Two Stage: :1 to 0:1 Low Backlash s Standard: < arcin Optional:
R-625 HYDRAULIC ROTARY RIG. Ground Engineering Equipment. Courtesy of Crane.Market
HYDRAULIC ROTARY RIG Ground Engineering Equipent A new odel SOILMEC electronic onitoring syste HYDRAULIC ROTARY RIG The hydraulic drilling rig R-625 is ounted on SOILMEC base carrier and has been specially
695 Super R - Series 3
BACKHOE LOADERS 695 Super R - Series 3 Engine Horsepower 82 kw/110 hp Tier 3 Operating weight (ax.) 8800 kg Bucket capacity 1200 l P R O F E S S I O N A L P A R T N E R FIRST CLASS COMFORT Case operators
Adjustable Speaker Mount GRAVIS 12
Adjustable Speaker Mount GRAVIS 12 User's Manual Translation of the original instructions Version 3.3 Released: 19.01.2017 Important Information, Please Read Before Use! KLING & FREITAG GmbH Junkersstraße
CA T ALOG MARCH C H E M I C A L O E M I N D U S T R I PUMPS A L H Y D R O N I C S O L A R
C A T A L O G MARCH PUMPS C H E M I C A L O E M I N D U S T R I A L H Y D R O N I C S O L A R P A G E 2 MARCH SEAL- LESS MAGNETIC DRIVE PUMPS The ultiate in reliable perforance for cheical, OEM, indtrial,
Courtesy of Crane.Market
CRAWLER CRANE Diensions Specifications...3 Superstructure...4 Working Ranges...8 Crane Ratings (Main Boo in 360 Working Area)...9 Crane Ratings (Jib in 360 Working Area)...0 to Crane Boo Construction Crane
Adjustable Speaker Mount GRAVIS 8
Adjustable Speaker Mount GRAVIS 8 User's Manual Translation of the original instructions Important Information, Please Read Before Use! KLING & FREITAG GmbH Junkersstraße 14 D-30179 Hannover TEL +49 (0)
8/11/2017 CARFAX Vehicle History Report for this 2014 DODGE GRAND CARAVAN SE: 2C4RDGBG6ER Accident reported. Regular oil changes
Vehicle Inforation: 2014 DODGE GRAND CARAVAN SE VIN: 2C4RDGBG6ER275979 SPORTS VAN 3.6L V6 SFI DOHC 24V GASOLINE FRONT WHEEL DRIVE Standard Equipent Safety Options Accident reported 2 Previous owners Regular
SCX1500A-3. SCX1500A-3 Stage IV / Tier 4 f
SCX1500A-3 SCX1500A-3 Stage IV / Tier 4 f General diensions Units: 3900 3900 R4950 Rear End Swing Radius R4950 1350 R5150 Rear End Swing Radius 1535 4525 15000 to 75000 When a counter weight with self-assebly
Active Control of Vibrations in Piping Systems
th International Conference on Structural Mechanics in Reactor Technology (SMiRT ) Espoo, Finland, ugust 94, 9 SMiRT Division 6, Paper 658 ctive Control of Vibrations in Piping Systes Carsten Block a,
Crawler Excavator. Operating Weight with Backhoe Attachment: 84, ,300 kg Operating Weight with Shovel Attachment: 89,400 91,200 kg
Crawler Excavator R 974 C litronic` Operating Weight with Backhoe Attachent: 84,4 11,3 kg Operating Weight with Shovel Attachent: 89,4 91,2 kg Engine Output: 4 kw / 43 P Bucket Capacity: 2,2 6,2 3 Shovel
LH 40 Port LH 50 Port
Material Handling Machines LH Port LH Port litronic` litronic` Operating Weight 1,,7 kg * Engine 1 kw / 11 HP Stage IV Stage IIIA Syste Perforance 33 kw * without working tool Technical Data Diesel Engine
PROlink OWNER'S MANUAL
PROlink OWNER'S MANUAL Table of Contents 3 PROlink Overview 4 PROlink Installation 4...Locating the Transforer 5...Mounting Transforers 7...Running Cable to Fixture 18 Installation Tools 18...Recepticle
EQUIPMENT. ZAXIS-5A series HYDRAULIC EXCAVATOR. Hitachi Construction Machinery Co., Ltd. CAB ENGINE UNDERCARRIAGE UPPER STRUCTURE
EQUIPMENT ZAXIS-A series : Standard equipent : Optional equipent ENGINE CAB UPPER STRUCTURE UNDERCARRIAGE Air cleaner double filters Air suspension seat with heater Auxiliary overload relief valve Blade
SPECIFICATIONS UNDERCARRIAGE
SPECIFICATIONS ENGINE Model... Yanar 4TNV94L Type... 4-cycle water-cooled, direct injection No. of cylinders... 4 Rated power ISO 9249, net... 34.1 kw (45.7 HP) at 2 000 in -1 (rp) EEC 80/1269, net...
CX17B ZTS CX15B Series 2-CX18B Series 2
MINI-EXCAVATORS CX17B ZTS CX15B Series 2-CX18B Series 2 CX15B Series 2 CX17B ZTS CX18B Series 2 Engine Horsepower 11.3 kw/15 hp 11.3 kw/15 hp 11.3 kw/15 hp Operating weight 1480 kg 1620 kg 1780 kg Max.
STANDARD EQUIPMENT OPTIONAL EQUIPMENT
STANDARD EQUIPMENT OPTIONAL EQUIPMENT We build a better future ISO Standard cabin All-weather steel cab with 360 O visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window
GE Power Conversion. MV Motor Designs & Specifications. Presented by IEEE/IAS Atlanta Chapter May 18, 2015
GE Power Conersion MV Motor Designs & Specifications IEEE/IAS Atlanta Chapter May 18, 2015 Presented by Bob.Kruseark@ge.co This published aterial is intended for our custoers use attending at the IEEE
FRP STRUCTURAL PRODUCTS
FRP STRUCTURAL PRODUCTS THINK OF STEEL STRUCTURAL SECTIONS NOW THINK OF SECTIONS THAT WON T RUST, ARE LOW MAINTENANCE, AND ARE LIGHTWEIGHT THAT S THE GRATING WORLD FRP STRUCTURAL PRODUCTS RANGE LOOK ALIKE
Crawler Excavator. Operating Weight with Backhoe Attachment: 66,400 79,600 kg Operating Weight with Shovel Attachment: 68,400 78,300 kg
Crawler Excavator R 964 C litronic` Operating Weight with Backhoe Attachent: 66,4 79,6 kg Operating Weight with Shovel Attachent: 68,4 78,3 kg Engine Output: 3 kw / 434 P Bucket Capacity:.. 3 Shovel Capacity:
New XLPE insulated cables. Guide for easy replacement
New insulated cables Guide for easy replaceent 8 7 6 5 Siplified choice for electrical constructions Draka Keila Cables has introduced a new line of cables with insulation. The new cables are ore reliable
DIE TWIN HEAD PUMPS IN-LINE ELECTRONIC CONTROL Heating - Air conditioning S.H.W. 50 Hz
OPERATING LIMITS Flow rates up to: /h Head up to: Max. discharge pressure: bar up to + C bar up to + C Teperature range: to + C Max. abient teperature: + C Flanges ND: to DIE TWIN HEAD PUMPS IN-LINE ELECTRONIC
VX 40 - VX 65 VORTEX. Submersible pumps. PERFORMANCE RANGE Flow rate up to 1500 l/min (90 m3/h) Head up to 26 m
VX 0 - VX 65 Subersible pups VORTEX Sewage water Civil use Industrial use PERFORMANCE RANGE Flow rate up to 1500 (90 3/h) Head up to 26 APPLICATION LIMITS 10 axiu iersion depth (with a sufficiently long
318C, 318C L 318C N. Hydraulic Excavators. Cat turbocharged 3066 T diesel engine
318C, Hydraulic Excavators Cat turbocharged 3066 T diesel engine Gross power Flywheel power Operating weight range Travel speed Drawbar pull 97 kw/132 hp 94 kw/127 hp 19 300 to 20 940 kg 5.2 k/h 195 kn
Grease Stand MODEL# DF MAINTENANCE AND OPERATION MANUAL. Page 1
Grease Stand Page 1 WARNING Safety First Standards Tested in general accordance with the applicable requirements of DIN EN 131 2 : 2012 BS EN 131 7 : 2013 ANSI ASC A147 20 2011 The best insurance against
3 Cable reels. Light/Energy. Dönges cable reel all-rubber as per EN (0) /
Dönges cable reel all-rubber as per EN 636 Uncoproising professional range ade fro hard rubber with double tubular frae for the fire brigade, THW and the disaster relief area. Protection class IP54 in
HST -LS Interlocking device (Translation of Original Manual)
Installation and Operating Manual for Components HST -LS Interlocking device (Translation of Original Manual) HST-LS Ident.-No.: 10268 HST-LS Ident.-No.: 10269 HST-LS, pictured Ident-Nr. 10269 The image
Tunneling Excavators. Product Information. Compact
Tunneling Excavators R 924 Copact R 944 C Product Inforation R 924 Copact R 944 C Litronic Operating Weight:,000-4,00 kg 4,600-44,200 kg Engine Output: 129 kw / 17 P 190 kw / 28 P Tunnel eight: 4.7-7.0.40-8.00
385C L. Ultra-high Demolition. Cat C18 Diesel Engine with ACERT Technology Net Power (ISO 9249) at 1800 rpm Operating weight with 40 m UHD front parts
385 L Ultra-high Deolition at 18 Diesel Engine with ERT Technology Net Power (ISO 9249) at 1800 rp 390 kw/530 hp Operating weight with 30 UHD front parts 94 100 kg with 36 UHD front parts 96 600 kg with
Purifying Moving Designing Vitalising Lighting Laying. Pumps
Purifying Moving Designing Vitalising Lighting Laying Pups Prograe and technical specifications 2018 Every water project relies on the circulation pup; without a pup, everything coes to a standstill. Whether
AUE, AUD, AUED. UNI-EN fire-fighting systems
58 AUE 11 UNI-EN 12845 units with 1 N series electric ain pup AUE 21 UNI-EN 12845 units with 2 N series electric ain pups AUD 11 UNI-EN 12845 units with 1 N series ain pup (diesel otor) AUED 21 UNI-EN
HYDRAULIC EXCAVATOR CX210B. Engine Horsepower 117 kw hp Operating weight 21.3 t Bucket capacity 0.25 m 3 to 1.25 m 3
HYDRAULIC EXCAVATOR CX210B Engine Horsepower 117 kw - 157 hp Operating weight 21.3 t Bucket capacity 0.25 3 to 1.25 3 MAXIMUM EFFICIENCY HYDRAULICS Three working odes tailor the achine to every application.