Vincenza LED Design by Ares Concept

Transcription

1 Vincenza 2

2 Vincenza LED Design by res Concept Registered Counity Design Nr Outdoor LED bollard light (no light pollution) Configuration: die cast aluiniu structure. EN B-47 alloy (low copper content). Extruded aluiniu ste. Double layer coating for high resistance to corrosion: The low copper luiniu alloy is painted with a double coat using powders which are coplaint with QULICOT standards: a first layer of epoxy powder (with excellent cheical and echanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atospheric agents).the entire painting process of the aluiniu fitting starts fro coponents which have been sand-blasted in advance to ake the surface ore porous and increase the adherence of the paint. res effects alkaline and acid washing to clean the surfaces copletely, then rinses with deineralised water to reove any residue particles, subsequently a cheical conversion treatent is done to protect against rusting. Plastic sandblasted diffuser, neoprene gaskets. Protection Rating: IP5 ( base version) and IP7 ( in-ground version) In copliance with EN 598- standards Class of insulation: ains ( base version):i, low voltage ( in-ground version): III Installation: wiring through a Mx,5 cable gland for with base version and through two Mx,5 for in-ground version (4,5<ø< cables) Pole with base: direct fixation with bolts to a concrete surface or throught a fixing plate in a concrete baseent Pole in-ground: we recoend to concrete the root of the pole for better stability EU Regulation 874/22 - Illuination equipent energy classes LED VERSION: Class // Luinaire supplied with integrated LED odules which cannot be replaced. White 2. luiniu 3. nthracite 4. Black 9. Rust-red Bollard Light_ surface Bollard Light_in-ground base. Installation requires a 3c water drainage layer (gravel) Recessed ground base The fitting is equipped with 2 cable input for in-ground version The fitting is equipped with cable input for base version Reote device required for low voltage. Do not install in hollow areas Full cut-off luinaire (no light pollution) Protection against ipact. IK - 2, joule

3 Vincenza Power LED / H With Base - 3 Syetric Eission COOL WHITE K LED l 72 FIXT l 22 CRI > NTURL WHITE 4K LED l 4 FIXT l cd / l C / C8 C9 / C Ø WRM WHITE 3K LED l 57 FIXT l 8 Vincenza Power LED / H With Base - 8 syetric Eission COOL WHITE K LED l 72 FIXT l 232 CRI > NTURL WHITE 4K LED l 4 FIXT l cd / l C / C8 C9 / C Ø WRM WHITE 3K LED l 57 FIXT l 85 Vincenza Power LED / H. 8 - With Base - 3 Syetric Eission COOL WHITE K LED l 72 FIXT l 22 CRI >7 2 9 cd / l C / C8 C9 / C Ø NTURL WHITE 4K LED l 4 FIXT l WRM WHITE 3K LED l 57 FIXT l

4 Vincenza Power LED / H. 8 - With Base - 8 syetric Eission COOL WHITE K LED l 72 FIXT l 232 CRI > cd / l C / C8 C9 / C Ø NTURL WHITE 4K LED l 4 FIXT l WRM WHITE 3K LED l 57 FIXT l

5 Vincenza Power LED / H. 2 - In Ground - 3 Syetric Eission 8329 COOL WHITE K LED l 72 FIXT l 22 CRI > cd / l C / C8 C9 / C NTURL WHITE 4K LED l 4 FIXT l Ø WRM WHITE 3K LED l 57 FIXT l 8 Vincenza Power LED / H In Ground - 3 Syetric Eission COOL WHITE K LED l 72 FIXT l 22 CRI > cd / l C / C8 C9 / C NTURL WHITE 4K LED l 4 FIXT l Ø WRM WHITE 3K LED l 57 FIXT l 8 Vincenza Power LED / H In Ground - 8 syetric Eission COOL WHITE K LED l 72 FIXT l 232 CRI > cd / l C / C8 C9 / C NTURL WHITE 4K LED l 4 FIXT l Ø WRM WHITE 3K LED l 57 FIXT l

6 Vincenza Power LED / H In Ground - 3 Syetric Eission COOL WHITE K LED l 72 FIXT l 22 CRI > cd / l C / C8 C9 / C Ø NTURL WHITE 4K LED l 4 FIXT l WRM WHITE 3K LED l 57 FIXT l 8 Vincenza Power LED / H In Ground - 8 syetric Eission COOL WHITE K LED l 72 FIXT l 232 CRI > cd / l C / C8 C9 / C Ø NTURL WHITE 4K LED l 4 FIXT l WRM WHITE 3K LED l 57 FIXT l 85 Cable gland ounted fro the inside Cable gland ounted fro the outside 25 25

7 ccessories: Vincenza LED ccessories chart 75 POWER SUPPLY W/ 24V - 24Vdc IP7 CLSS II SELV POWER SUPPLY 5W/2 24V - 24Vdc IP7 CLSS II SELV POWER SUPPLY W /2 24V - 24Vdc IP7 CLSS II SELV POWER SUPPLY 2W/22 24V - 24Vdc IP7 CLSS II SELV POWER SUPPLY 7W/22 24V - 24Vdc IP7 CLSS II SELV EQ SPD: (SURGE PROTECTION DEVICE) 275Vac MXIMUM DISCHRGE CURRENT K (8/2μs) MXIMUM OPERTING CURRENT SUITBLE FOR SERIES CONNECTION - IP acc. code prod. code Correct Fixing Method Bollard fixed on plinth plug Incorrect Fixing Method Do not fix the bollard directly on the ground

8 253