series SLIDER ELECTRIC CYLINDER - BALL SCREW DRIVE (WITHOUT MOTOR)

Transcription

1 series Specification odel ±0.01 Belt lead (mm) Rated thrust () (mm) 0~800 / 0 Pitch Ball screwφ(mm) C7φ1 High rigidity linear guide (mm) W4 H8. Home sensor Outside Built in EE-SX67 (P) - Stepping motor 4 ax. speed(mm/s) Horizontal ax. payload(kg) Vertical Coupling(mm) 7 ax. static torque (.m) 0.3 Sensor layout ight indicator(red) ain circuit oad OUT Under voltage output 0m Servo motor ax. speed (mm/s) Horizontal ax. payload(kg) Vertical 0 0 W Coupling (mm) 7 8 When the stroke is longer than 600mm, resonance of the ball screw may occur depending on the operation conditions (critical speed). In this case, reduce the speed setting on the program by referring to the maximum speeds shown. Order example odel Spec. 0 0 BC 4 C B Special order no. 0~800 mm 0 mm pitch Ball screw brand Ball screw lead otor position Stepping motor brand Home sensor imit sensor T-Standard IT 0 mm BC Exposed 4 STEP motor Out side Out side 0 mm B On lower side Tamagawa ( TS36173E8) C otor side 3 1 Pc mm BR On right side 4 Oriental ( PK4-01) D Opposite motor side 4 Pcs B On left side Sanyo ( 3H09-00) o sensor o sensor otor brand, poweroutput, brakes E one one 0W SERVO motor P Y itsubishi Panasonic 0W B T Delta eed not show B with no brake.

2 Performance charts llowable overhang.m Horizontal installation kg ead ead ead kg 4kg B C 1 8 7kg 0 6 kg Wall installation kg ead ead ead kg 4kg 7kg kg B C Vertical installation ead ead ead 7kg 1.kg C Unit:.m Static loading moment Y 16 P 0 R 19 Standard stepping motors Brand ax static torque C-Voltage Stepping motor model Compatible driver model Tamagawa 0.3 DC4V -phase-ts36173e8 CD-D 00/400/800/1600 P/rev Oriental 0.3 Single-phase 0V -phase-pk4-01 UDK11 00/400/800/1600/300 P/rev Sanyo 0.3 DC4V -phase-3h09-00 US1D00P 00/400/800/1600/300 P/rev Standard servo motors Brand ark Brake Watp C-Voltage otor model Compatible driver model itsubishi o brake(horizontal type) With brake(vertical type) HP-KP 0 HP-KPB R-J3- R-J3- Panasonic P o brake(horizontal type) With brake(vertical type) SD01P1S SD01P1T DDT DDT Delta T o brake(horizontal type) With brake(vertical type) EC-C0401ES EC-C0401FS SD-B011-B SD-B011-B

3 Stepping motor 4/Dimensions BC otor exposed echanical limit.3±1 Origin4. -φ3h7 6depth 9 echanical limit 1.8±1 18± depth -4 1depth depth B otor on lower side echanical limit Origin ±1 echanical limit -φ3h7 6depth 1.8± ± depth depth depth

4 Stepping motor 4/Dimensions B otor on left side echanical limit 3.8± 1 Origin 99 18± echanical limit 1.8± 1 -φ 3H7 6depth depth depth depth BR otor on right side -φ3h7 6depth echanical limit 3.8±1 Origin 99 9 echanical limit 1.8±1 1 18± depth depth depth

5 Servo motor 0W/Dimensions BC otor exposed Brake+30 echanical limit 61.8±1 Origin φ3h7 6depth 9 echanical limit 1.8±1 1 18± depth -4 1depth depth B otor on lower side echanical limit Origin ±1 -φ3h7 6depth echanical limit 1.8± ± depth depth - 8.depth

6 Servo motor 0W/Dimensions B otor on left side echanical limit 3.8±1 Origin ±0.0 -φ3h7 6depth echanical limit 1.8± depth depth depth BR otor on right side echanical limit 3.8±1 4 Origin φ3h7 6depth echanical limit 1.8±1 1 18± depth depth depth