Features of the Cross Roller Table
|
|
- Horatio Edwards
- 6 years ago
- Views:
Transcription
1 Features and Types Features of the Table Stopper bolt Rail Clearance adjustment bolt Rail Base Roller Cae Structure and Features Fi.1 Structure of the The is a compact, hihly riid finite linear uide unit that has the Cross Roller uide(s) between the precision-machined table and base. There are two types of the : model VRU, and a miniature type model VRT. The is used in extensive applications such as OA equipment and peripherals, measurin instruments and printed circuit board drillin machines.
2 [Easy Installation] Since the Cross Roller uide(s) is installed between the precision-machined table and base, a hihly accurate linear uide mechanism is achieved simply by mountin the product with bolts. [are Permissible oad] Since rollers with lare rated loads are installed in short pitches, the cross roller uide is capable of bearin a heavy load, achievin a hihly riid linear uide mechanism and ainin a lon service life. odel VRT [Diversified Usae] Since the rollers are orthoonally arraned one after another, the uide system is capable of evenly receivin loads in the four directions applied on the table. (See Fi.2.) odel VRT-A odel VRU Fi.2 oad Directions [Hihly Corrosion Resistant] The base and the table of models VRT- and VRT-A use stainless steel. Their rails, rollers, roller caes and screws are also made of stainless steel. As a result, these uide systems have sinificantly hih corrosion resistance. The base and the table of model VRU- are made of aluminum.
3 odel VRT iniature Type (Tapped Base Type) F n F A H m φ D1 B B1 S1 1 S F1 T1 f1 n1 F1 T 1 n f1 1 ain dimensions Table surface dimensions odel No. aximum stroke idth Heiht enth ass Table mountin tap position Note) All stainless steel type with hih corrosion resistance is also available. B n F S n1 F1 B1 D1 VRT VRT VRT VRT VRT VRT VRT VRT VRT VRT VRT VRT VRT VRT VRT VRT VRT VRT VRT VRT VRT
4 A B C aximum stroke Accuracy: ΔC Accuracy: ΔD Side surface dimensions Base surface dimensions ountin hole position No. of rollers Basic load ratin Static permissible moment C C0 A B C Unit: mm Accuracy μm T T1 H 1 A m S1 n f1 1 Z kn kn N-m N-m N-m ΔC ΔD
5 odel VRT-A iniature Type (Tapped Base Type) F n F A h m H B B1 φ D1 φ d φ D 1 S F1 n1 F1 T1 T 1 l 1 l 2 1 ain dimensions Table surface dimensions odel No. aximum stroke idth Heiht enth ass Table mountin tap position Note) All stainless steel type with hih corrosion resistance is also available. B n F S n1 F1 B1 D1 VRT 1025A VRT 1035A VRT 1045A VRT 1055A VRT 1065A VRT 1075A VRT 1085A VRT 2035A VRT 2050A VRT 2065A VRT 2080A VRT 2095A VRT 2110A VRT 2125A VRT 3055A VRT 3080A VRT 3105A VRT 3130A VRT 3155A VRT 3180A VRT 3205A
6 A B C aximum stroke Accuracy: ΔC Accuracy: ΔD Side surface dimensions Base surface dimensions ountin hole position No. of rollers Basic load ratin Static permissible moment C C0 A B C Unit: mm Accuracy μm T T1 H 1 A m d D h l 1 l 2 1 Z kn kn N-m N-m N-m ΔC ΔD
7 odel VRU 2 n1 F1 2 A m2 h φ d φ D B1 B b1 m1 K m1 φ D1 B2 S n F t1 T H f2 f1 2 2-S1 l odel No. aximum stroke ain dimensions idth Heiht enth ass (Note) k Table mountin tap position Table surface dimensions Side surface mountin tap position B n F S B1 n1 F1 2 b1 t1 S1 l VRU (0.04) VRU (0.05) VRU (0.07) VRU (0.09) VRU (0.1) VRU (0.12) VRU (0.13) VRU (0.09) VRU (0.13) VRU (0.17) VRU (0.21) VRU (0.25) VRU (0.29) VRU (0.33) Note) Stainless steel type with hih corrosion resistance is also available. The value in the parentheses represents the mass of a stainless steel type.
8 A B C aximum stroke Accuracy: ΔC Accuracy: Δ D Base surface dimensions ountin hole position No. of rollers Basic load ratin Static permissible moment C C0 A B C Unit: mm Accuracy μm T H K d D h D1 m1 A m2 B2 f1 f2 Z kn kn N-m N-m N-m ΔC ΔD
9 odel VRU 2 n1 F1 2 A m2 h φ d φ D f3 B1 B b1 m1 K m1 φ D1 B2 S n F t1 T H f2 f1 2 2-S1 l odel No. aximum stroke ain dimensions idth Heiht enth ass* k Table mountin tap position Note) Stainless steel type with hih corrosion resistance is also available. The value in the parentheses represents the mass of a stainless steel type. Table surface dimensions Side surface mountin tap position B n F S B1 n1 F1 2 b1 t1 S1 l VRU (0.3) VRU (0.4) VRU (0.6) VRU (0.7) VRU (0.9) VRU (1) VRU (1.1) VRU (0.8) VRU (1.2) VRU (1.5) VRU (1.9) VRU (2.2) VRU (2.6)
10 A B C aximum stroke Accuracy: Δ C Accuracy: Δ D Base surface dimensions ountin hole position No. of rollers Basic load ratin Static permissible moment C C0 A B C Unit: mm Accuracy μm T H K d D h D1 m1 A m2 B2 f1 f2 f3 Z kn kn N-m N-m N-m ΔC ΔD
11 odel VRU 2 n1 F1 2 A m2 h φ d φ D f3 f4 B1 B b2 b1 m1 K m1 φ D1 B2 S n F t1 t2 T H f2 f1 2 4-S1 l odel No. aximum stroke ain dimensions idth Heiht enth ass* k Note) Stainless steel type with hih corrosion resistance is also available. The value in the parentheses represents the mass of a stainless steel type. odels VRU9910 and VRU91010 are build to order. Table surface dimensions Table mountin tap position Side surface mountin tap position B n F S B1 n1 F1 2 b1 b2 t1 t2 S1 l VRU (1.7) VRU (2.5) VRU (3.2) VRU (4) VRU (4.8) VRU (5.6) VRU (6.4) VRU (7.1) VRU (7.9) VRU ( ) VRU ( ) VRU ( ) VRU ( ) VRU ( ) VRU ( ) VRU ( )
12 A B C aximum stroke Accuracy: Δ C Accuracy: Δ D Base surface dimensions ountin hole position No. of rollers Basic load ratin Static permissible moment C C0 A B C Unit: mm Accuracy μm T H K d D h D1 m1 A m2 B2 f1 f2 f3 f4 Z kn kn N-m N-m N-m ΔC ΔD
RSR. LM Guide Miniature Types Model RSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use
LM Guide Miniature Types Model Endplate LM block End seal LM rail Ball Grease nipple Cross section Point of Selection A Point of Design Options Model No. Precautions on Use Accessories for Lubrication
More informationLM Guide Radial Type Model SR
LM Guide Radial Type Model Endplate LM block Grease nipple End seal LM rail 90 Ball Retainer plate Side seal (Optional) Cross section 30 Point of Selection A Point of Design Options Model No. Precautions
More information12.4 Miniature Type, MSC MSD Stainless Steel Series
12.4 Miniature Type, MSC MSD Stainless Steel Series A. Construction Carriage End Cap MSC Standard Type End Seal Rail MSD Wide Type Ball Retainer Bottom Seal 45 45 B. Characteristics MSC st ows with Gothic-arch
More informationMiniature LM Guide RSR and RSR-W
iniature Guide RSR and RSR End plate block rail End seal Ball Greace nipple ig. 1 onstruction of odel RSRV onstruction and eatures Balls roll in two rows of precisionground raceways on an rail and an block.
More informationSRG. Caged Roller LM Guide Ultra-high Rigidity Type Model SRG. Point of Selection. Point of Design. Options. Model No. Precautions on Use
Caged Roller LM Guide Ultra-high Rigidity Type Model LM block LM rail End seal Endplate 45 45 Caged roller Roller 45 Cross section 45 * or the caged roller, see. Point of Selection A Point of Design Options
More informationHSR(Ct Grade) Cost effective Type (Ct Grade) of LM Guide Debuts STOCK DISPONIBLE ENTREGA INMEDIATA
Cost effective Type (Ct Grade) of L Guide Debuts A cost effective series of the well-established model HSR has been newly added. Optimal for the general linear guide market such as for conveyance systems!
More informationThrust Needle Roller Bearings Thrust Roller Bearings. Structures of Thrust Bearings. Needle roller. Cage. Cylindrical roller. Cage.
eele Roller Bearins Roller Bearins Structure an Features Bearins consist of a precisely mae cae an rollers They have hih riiity an hih loa capacities an can be use in small spaces eele Roller Bearins incorporate
More information12.3 Full Roller Type, MSR Series
12.3 Full Roller Type, MSR Series A. Construction Carriage End Seal Grease Nipple End Cap Inner Seal Roller Bottom Seal 45 Rail 45 B. Characteristics The full roller type linear guideway, MSR series, equip
More informationLinear Bushings. Description of each series and Table of dimensions
Linear Bushins escription of each series and Table of dimensions Linear Bushin G Pae - to -9 Linear Bushin Pae - to -7 ompact Linear Bushin Pae -7 to -77 Miniature Linear Bushin Pae -7 to - In the table
More informationIntroduction of Each Series
12 Introduction of Each Series 12.1 eavy Load Type, MSA Series A. Construction LINEAR GUIDEWAY Upper Retainer Carriage End Cap End Seal Grease Nipple Ball Lower Retainer Rail 45 eavy Load Type, MSA Series
More informationHSR-M1VV. LM Guide Medium-to-low Vacuum Type Model HSR-M1VV. Point of Selection. Point of Design. Options. Model No. Precautions on Use
LM Guide Medium-to-low Vacuum Type Model LM block: THK-EX50 (martensitic stainless steel) End plate: SUS304 Labyrinth end seal dedicated for Medium-to-Low Vacuum: SUS304 Upper plate: SUS316L LM rail: THK-EX50
More informationSSR. Caged Ball LM Guide Radial Type Model SSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use
Caged Ball LM Guide Radial Type Model Endplate LM block End seal LM 90 30 Ball Ball cage Cross section * For the Ball Cage, see A. Point of Selection A Point of Design Options Precautions on Use Accessories
More informationCross Roller Guide/Ball Guide General Catalog
General Catalog A Product Descriptions Features and Types... A7-2 Features of the.. A7-2 Structure and Features... A7-2 Types of the.. A7-3 Types and Features... A7-3 Point of Selection... A7-4 Rated Load
More informationRSR-M1. LM Guide High Temperature Type Model RSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use
LM Guide High Temperature Type Model Endplate SUS34 LM block THK EX5 End seal (High temperature rubber) LM rail THK EX5 Ball SUS44C Grease nipple SUS34 Point of Selection A Point of Design Options Model
More informationThe Classification Chart of PMI Linear Guideways
1 The Characteristics of MI s The Classification Chart of MI s 2 (1) igh positioning accuracy, high repeatability The MI linear guideway is a design of rolling motion with a low friction coefficient, and
More informationGuide plate. Fig. 1 Construction of Slide Pack Type FBW-RUU
A Slide Pack Slide Pack Type FBW Japanese patent No. 1696446 Overseas patent resistered in the U.S. Mounting plate Ball Slide rail Seal Guide plate Stopper Fig. 1 Construction of Slide Pack Type FBW-RUU
More informationTE B. Points. Precision Positioning Table TE. Comparison with Precision Positioning Table TU. Major product specifications.
TEB 4 Precision Positioning Table TE TE B Ball screw inear Points Table specification is selectable according to your use 1 Slide table ight weight, low profile and compact positioning table using high-strength
More informationHSR. LM Guide Global Standard Size Model HSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use
LM Guide Global Standard Size Model Retainer plate Endplate End seal Grease nipple Ball Retainer plate Inner seal (Optional) Side seal LM rail Cross section 45 45 Point of Selection A Point of Design Options
More informationLinear Guideway General Catalog
General Catalog General Catalog Index TY AG Contents Technical roducts TY AG 1 2 3 4 5 6 7 8 6 7 1 11 11 11 12 12 13 14 15 18 19 1. The Characteristics of MI s 2. The Classifi cation Chart of MI s 3. The
More informationSHS. Caged Ball LM Guide Global Standard Size Model SHS. Point of Selection. Point of Design. Options. Model No. Precautions on Use
Caged Ball LM Guide Global Standard Size Model LM block LM rail Endplate End seal 45 Ball Ball cage Cross section 45 * For the Ball Cage, see. Point of Selection Point of Design Options Model No. Precautions
More informationNSR-TBC. LM Guide Self-aligning Type Model NSR-TBC. Point of Selection. Point of Design. Options. Model No. Precautions on Use
LM Guide Self-aligning Type Model LM casing Spline nut End seal LM rail Grease nipple Side plate Clearance adjustment bolt 90 Side seal (Optional) Ball Retainer Cross section 30 Point of Selection A Point
More informationPrecision Modules PSK
Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum
More informationFeatures of the Slide Pack
BER AB тел. (495) 727-22-72 thk-mail@ya.ru Features and Types Features of the Mounting plate Ball Ball case Slide rail Seal uide plate Stopper Slider Structure and Features Fig.1 Structure of Model FBW-RUU
More informationLinear Bushing LBE LBD LBB LM LME LMB
Linear Busin LBLBLBBLMLMLMB Linear Busin is a i precision linear motion rollin uide wic travels alon a saft to acieve endless linear motion. In te external cylinder, a retainer, steel balls, etc. are compactly
More informationTE B. Points. Precision Positioning Table TE. Comparison with Precision Positioning Table TU. Major product specifications.
3 4 Precision Positioning Table TE TE B Ball screw inear Points Table specification is selectable according to your use 1 Slide table ight weight, low profile and compact positioning table using high-strength
More informationSVR/SVS. Caged Ball LM Guide Ultra-heavy Load Type for Machine Tools Model SVR/SVS. Point of Selection. Point of Design. Options. Model No.
Caged Ball Guide Ultra-heavy Load Type for Machine Tools Model Protector 90 rail Ball cage Radial type model SVR Cross section 40 50 Ball * For the Ball Cage, see A. 4-Way Type Model SVS Cross section
More informationShort Stroke Transducer potentiometric 10 mm up to 150 mm. Series T / TS Series TR / TRS
Short Stroke Transducer potentiometric 10 mm up to 150 mm Series T / TS Series TR / TRS Compact transducer with proven conductive-plastic technoloy. The model with push rod and ball couplin enables a backlashand
More information12.5 Ball Chain Type, SME Series
12.5 Ball Chain Type, SME Series A. Construction Carriage End Cap End Seal Grease Nipple Inner Seal Ball Bottom Seal Ball Chain 45 Rail 45 B. Characteristics The ball chain type linear guideway, SME series,
More informationHSR-M1. LM Guide High Temperature Type Model HSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use
LM Guide High Temperature Type Model Endplate SUS304 End seal (High temperature rubber material) LM THK-EX50 Ball SUS440C Side seal (High temperature rubber material) LM rail THK-EX50 Cross section 45
More informationDURA-SCAPE CC-SERIES. Non-Rotating Air Cylinder CC-1 CC-2 TECHINICAL SPECIFICATION OPERATING PRINCIPLES
CC Series of Non-Rotating Air Cylinders are designed as multi purpose units. The CC series is designed for applications where all the features of our SC series are not required, while still offering the
More informationLow Profile Slide Table Series MXF ø8, ø12, ø16, ø20
Low Profile Slide Table Series XF ø, ø, ø1, ø Low-profile and compact type, air slide table with the construction of guide and cylinder aligned in parallel. eat appearance Protecting stopper section with
More informationLinear Bushing General Catalog
General Catalog A Technical Descriptions of the Products B Product Specifications (Separate) Features and Types... Features of the... Structure and features... Dedicated Shafts for Model LM... Standard
More information210C-1 Selection materials
7 2C- Selection materials 8 Calculation of cylinder buckling ) Be sure to calculate the cylinder buckling. 2) In the case of using a hydraulic cylinder, the stress and buckling must be considered depending
More informationRoHS Directive-Compliant Motorized Linear Slides EZS Series for Clean Room Use. Features
Motorized Actuators RoHS Directive-Compliant Series for Clean Room Use The Series for Clean Room Use is a product designed with the same level of function and performance as the Series but is ideal for
More informationEngineered for Performance
Enineered for Performance Intensive development efforts have produced this hih performance rane of cleats that provide unbeatable holdin power while allowin easy cleatin and releasin of control lines in
More information(1) High positioning accuracy, high repeatability. (2) Low frictional resistance, high precision maintained for long period
Linear Guideway 1 The Characteristics of PMI Linear Guideways (1) igh positioning accuracy, high repeatability The PMI linear guideway is a design of rolling motion with a low friction coeffcient, and
More informationFlat type available. Can be used for wall-mount. Cable length. Note 4
Ordering method Origin position change Grease type troke Note 3 ingle carriage model 7 odel Cable carrier Optional cable Cable length 7: Incremental entry location carrier for users Note No entry: side
More informationseries SLIDER ELECTRIC CYLINDER - BALL SCREW DRIVE (WITHOUT MOTOR)
series Specification odel ±0.01 Belt lead (mm) Rated thrust () 84 1 170 (mm) 0~800 / 0 Pitch Ball screwφ(mm) C7φ1 High rigidity linear guide (mm) W4 H8. Home sensor Outside Built in EE-SX67 (P) - Stepping
More informationLinear Bushing. General Catalog A-523
Linear Bushing General Catalog A Technical Descriptions of the Products B Product Specifications (Separate) Features and Types... Features of the Linear Bushing... Structure and features... Dedicated Shafts
More informationPrecise Stable Durability High Rigidity. Meet the Multi-Demand of Accuracy and Efficiency
Precise Stable Durability High Rigidity Meet the Multi-Demand of Accuracy and Efficiency Linear Guideway B1-1 The Characteristics of PMI Linear Guideways High positioning accuracy, high repeatability
More information2-3 Miniature MGN/MGW Series Features of MGN Series
54 G99TE08-0405 2-3 Miniature MGN/MGW Series 2-3-1 Features of MGN Series 2-3-2 Construction of MGN Series Cap Block End cap End seal Grease nipple Ball Bottom seal Retainer Rolling Circulation System:
More informationProduct Description. Characteristic features R310A 2402 ( ) Linear Modules MLR
9 Bosch Rexroth Corporation R310A 40 (1.11) MLR Product Description Characteristic features MLR...: with Cam Roller Guide and Toothed Belt Drive for high-speed applications (up to 10 m/s) with Cam Roller
More informationSRS. Caged Ball LM Guide Miniature Type Model SRS. Point of Selection. Point of Design. Options. Model No. Precautions on Use
Caged Ball M Guide Miniature Type Model M rail Endplate End seal M block Compact type Model -M Ball Side seal Ball cage Wide type Model -WM * or the ball cage, see A. Point of Selection A Point of Design
More information511E. LM Guide General Catalog
General Catalog A Classification Table of the s Ball Guide Caged Ball Type Full-ball Type Standard Type Standard Type Model SHS Global Standard Size Model SSR Radial Model HSR 4-way Equal Load Model SR
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 79-82 Technical Data 83-88 Dimensions 89 79 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationLinear Shafting. Motion Control Products For Industrial Automation. Contact us at: PH: (330) FAX: (330)
Linear Shaftin Motion Control Products For Industrial Automation Contact us at: PH: (33) 847 7 FAX: (33) 847 528 www.eshaft.com For over two decades, Technico has been a leader in the motion control industry.
More informationMax. particle size 5 µm. Pressure for determining piston forces Repetitive precision. Polyurethane
Piston rod cylinders Guide cylinders 1 Ambient temperature min./max. +0 C / +60 C edium Compressed air ax. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure for determining piston
More informationMiniature Ball Rail Systems
R310EN 2210 (2004.06) The Drive & Control Company 2 Bosch Rexroth AG Linear Motion and Assembly Technologies Miniature-BRS R310EN 2210 (2004.06) Linear Motion Systems Ball Rail System Standard Ball Rail
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 71-74 Technical Data 75-78 Dimensions 79 71 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationDescription of Each Series & Table of Dimensions
The eedle Roller Bearin Series has been produced at a quality level in conformance with ISO- and ISO- usin a production system that reduces neative impact on the lobal environment. This catalo adopts the
More informationPrecision Linear Pack
Precision Linear Pack General Catalog A Technical Descriptions of the Products B Product Specifications (Separate) Features... Features of the Precision Linear Pack... Structure and features... Rated Load
More informationPHASER SERIES LINEAR MOTOR SINGLE-AXIS ROBOTS CONTENTS. Main functions P.32 PHASER SPECIFICATION SHEET 218. Robot ordering method description 218
rticulated inear conveyor C single-axis INR OTOR ING-XI ROBOT RI CONTNT PCIFICTION HT 218 Robot ordering method description 218 Robot ordering method terminology 219 F TYP F7/F7D 220 F/FD 226 F20/F20D
More informationThe Characteristics of PMI Linear Guideways
Linear Guideway 1 The Characteristics of PMI Linear Guideways (1) High positioning accuracy, high repeatability The PMI linear guideway is a design of rolling motion with a low friction coeffcient, and
More informationFOR EVERY APPLICATION
FOR EVERY APPLICATION In order to be able to satisfy every application, RÖHM has hydraulically, pneumatically as well as electrically actuated cylinders without through-hole in their product range. hydraulical
More informationServomech 1.4 BALL SCREW LINEAR ACTUATORS Series BSA
1.4 BALL SCREW LINEAR ACTUATORS Series BSA Technical features table SIZE FEATURES BSA 10 BSA 20 BSA 25 BSA 30 BSA 40 Rod diameter [mm] 25 25 30 35 40 Protective tube diameter [mm] 36 36 45 55 60 Motor
More informationPrecision Modules PSK. The Drive & Control Company
Precision Modules PSK The Drive & Control Company 2 Bosch Rexroth Coporation Precision Modules PSK R310A 2414 (2008.07) Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear
More informationSLEWING RING CHARACTERISTICS, APPLICATIONS
SLEWING RING CHARACTERISTICS, APPLICATIONS Slewing rings are large-sized bearings which are able to accommodate combined load, i.e. axial, radial loads and tilting moment. They are usually provided with
More informationSLIDER ELECTRIC CYLINDER - BALL SCREW DRIVE (WITHOUT MOTOR) Specification. Repeatability (mm) ±0.01. Belt lead (mm)
series Sensor layout Specification odel Repeatability (mm) ±0.01 Belt lead (mm) ax. speed (mm/s) 00 800 00 Servo motor 0W Horizontal 0 30 22 18 ax. payload (kg) Vertical 12 8 3 Rated thrust (N) 341 170
More informationAxial-radial cylindrical roller bearings
Axial-radial cylindrical roller bearings Designs and variants.............. 320 Bearing data..................... 321 (Boundary dimensions, tolerances) Product table 5.1 Axial-radial cylindrical roller
More informationBallscrews / Linear Guideway General Catalog
Ballscrews / inear Guideway General Catalog inear Guideway 2 Introduction of ach Series 2. eavy oad Type, MSA Series A. Construction Upper Retainer Carriage nd Seal nd Cap Rail Grease Nipple Ball 45 ower
More informationLinear Drive with Ball Screw Drive Series OSP-E..SB
Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions
More informationContents. Page. 1. Product description. 2. The AXC line of linear axes. 3. AXLT line of linear tables. AXC and AXS product overview...
SNR Industry Contents Page 3 1. Product description AXC and AXS product overview... 6-8 Dynamic load ratings of the linear motion systems... 9 Compact modules... 10-11 Linear tables... 12 Telescopic axes...
More informationAir Slide Table Series MXP
ir Slide Table Series XP ø, ø, ø, ø, ø1 X XU XS X XF X X XP XY TS - -X Individual -X 19 igh rigidity, igh precision Cylinder is built into the rail of the linear guide. aterial of body and guide block
More informationPrecision Positioning Table LH
CTLH32M Precision Positioning Table LH TSLH12M/J Table with bellows 12 -M Depth 1( 1 ) 1( 1 ) 32 29 29 18 19 -M8 Depth 16 13 (3.7) (7.3) L 1( 2 ) (2.3) E S/2 13 S/2 E (2.3) 1 1 12 TSLH M CTLH M 28 7 Hole
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
01_1 Miniature st Headline_36 Ball Rail pt/14.4 Systems mm second line 2 Linear Motion and Assembly Technologies Miniature Ball Rail Systems Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts
More information2. HG Series Linear Guideway Four-row Super Heavy Load
16 2. HG Series Linear Guideway Four-row Super Heavy Load 2-1 Features of the HG Series Linear Guideway 2-2 Construction of HG Series Block Cap End cap End seal (Double seals and scraper) Rail Grease nipple
More informationLINEAR MOTOR SINGLE-AXIS ROBOTS
eries Product ineup INR OTOR ING-XI ROBOT No limit on critical speed even when using a long stroke of 4 m. "" series delivers superb performance during long distance transfer. 32 Critical speed is not
More informationFeatures of the LM Guide
Features of the Functions Required for Linear Guide Surface Large permissible load Highly rigid in all directions High positioning repeatability Running accuracy can be obtained easily High accuracy can
More informationBall Rail Systems RE / The Drive & Control Company
Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems
More informationHigh Power. EZA Series. High Thrust Force. Large Transportable Mass. Motorized Cylinders. Features
Motorized Cylinders For details on this product please refer to our website, contact technical support or your nearest Oriental Motor sales office. These motorized cylinders have a built-in LM guide. Greater
More informationFeatures of the Cam Follower
507E Features and Types Features o the ring Seal Side plate Stud Needle roller Cage Fig.1 Structure o Model CF UU-A Structure and Features The is a compact and highly rigid bearing with a shat. It contains
More informationE B. TE With high-strength aluminum alloy bed
Precision positioning table TE With high-strength aluminum alloy bed E B IKO International, Inc. www.ikont.com IKO Mechatronics Site https://www.me-iko.com/mecha-tool/index_en.php IKO INTERNTION, INC.
More informationKNT Type Keyless Drill Chucks FOR DRILL ONLY, NOT FOR END MILL OR TAP
-Taster V- COE 219-001 Find your exact zero points in all three axes in seconds with the new distance measurin scale (raduated and analoue). 20 h 7 =12 With Standard Stylus %OFN VFOH IRU UGO GHÀHFWRQ HG
More informationCKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company
CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive The Drive and Control Company Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE 8 615 (03.006) Rexroth Linear Motion Technology
More informationSERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion.
1.1 SERVOMECH LINEAR ACTUATORS SERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion. Developed and manufactured for industrial applications,
More informationSSP TYPE. Cylindrical Spline Nut. part number structure B-16. When two spline nuts are used in close contact. major dimensions part number
SSP TYPE Cylindrical Spline Nut structure example SSP 8 - - T1 - - P / CU SSP type nut length blank standard long number of nuts attached to one shaft with special specification accuracy grade blank high
More informationFeatures of the LM Guide
Features of the Functions Required for Linear Guide Surface Large permissible load Highly rigid in all directions High positioning repeatability Running accuracy can be obtained easily High accuracy can
More informationPrecision Mini Power Slides-Built-in Cylinder
Precision ini Power Slides-Built-in ylinder PS SERIES 4.126 Precision applications: Preloaded Dual- roller bearings eliminate side play for excellent part position repeatability. inear accuracy is within.0001"
More informationDHDB. Free pass possible!
Overview/Configuration/Ordering www.festo.co.kr/amiproduct Horizontal stopper cylinders Piston diameter 50 mm Stroke length 50 mm Lever return force 16N Double-acting Position sensing Flexible cushioning
More informationRoaDyn S635. Force. Wheel force transducer for heavy cars and high performance vehicles. Type 9267A1
Force RoaDyn S635 Wheel force transducer for heavy cars and hih performance vehicles For measurin three forces and three moments on a rotatin wheel; a major constituent in modern vehicle development. Modular
More informationProduct overview. Joints. Circlips for ball seats DIN K0714. Quick plug couplings with radial offset compensation K0709. Page 837.
Joints 825 Product overview Joints Quick plug couplings with radial offset compensation K0709 Quick plug couplings with radial offset compensation and screw-on flange K0710 Quick plug couplings with angular
More informationMiniature Monocarrier MCM02, MCM03
www.bergab.ru Берг АБ bergab@ya.ru Тел. ()---, факс () - Miniature MCM, MCM Supports small conveyors and test equipment in a wide range of applications. Compact, lightweight design saves space and delivers
More informationCompact Linear Stage
Compact Linear Stage For Loads to 10 kg L-406 Travel ranges from 26 mm to 102 mm (1" to 4") Stepper motor or DC servo motor with and without gearhead Direction-sensing reference point switch Integrated
More informationV SWISS MADE LINEAR TECHNOLOGY
Excerpt from main catalogue inear modules V 11-15 SWISS MDE INER TECHNOOGY ine Tech inear modules Table of contents Product overview 6 7 Design fundamentals / ubrication / Maintenance 8 Profile cross-sections
More informationDURA-SLIDE AIR-SERIES. Air-Powered Slides AIR-10 AIR-20 AIR-30 AIR-40
AIRSERIES AIR Series of Pneumatic Linear Positioning Devices provide a practical, lowcost approach to automatic work positioning. The builtin air cylinder simplifies slide operation and eliminates the
More informationBall. Ball cage. Fig.1 Structure of Caged Ball LM Guide Actuator Model SKR
Caged all LM Guide Actuator Model Inner block all screw shaft Grease nipple Outer rail all cage all Structure and Features Fig.1 Structure of Caged all LM Guide Actuator Model Caged all LM Guide Actuator
More informationLS Linear Heads. Standard AC Motors A-259. Standard AC Motors Introduction. Induction Motors. Reversible Motors. Brake Motors.
Standard C S inear Heads Standard C Introduction Induction Reversible Electromagnetic Brake V Series Clutch & Brake Synchronous ow-speed Watertight, Synchronous Dust-Resistant Torque Right-ngle Gearheads
More informationTechnical features table. Rod diameter [mm] Protective tube diameter [mm] Motor flange European standard IEC B14
1.4 ACME SCREW LINEAR ACTUATORS Series ATL Technical features table Servomech SIZE FEATURES ATL 10 ATL 20 ATL 25 ATL 30 ATL 40 Rod diameter [mm] 25 25 30 35 40 Protective tube diameter [mm] 36 36 45 55
More informationV SWISS MADE LINEAR TECHNOLOGY
Compact units Excerpt from main catalogue SWISS MADE LINEAR TECHNOLOGY V 11-15 Line Tech compact units Table of contents Product overview 106 107 Design fundamentals / Lubrication / Maintenance 108 Profile
More informationPrecision Positioning Table TU
Precision Positioning Table TU TU4, TU Table with C-ube (Motor specification) 6 (minimum center distance between two slide tables in close contact) S 4 E TUC TUS TUF TUG ength 1 Overall length 1 S 18 186
More informationIndex INDEX. Product overview Technical data... 5 RHL Sliders for RHL80: V100, V250 & V RHL
LINEAR UNIT RHL Svanemærket tryksag 541-713 INDEX Index Product overview... 4 Technical data... 5 RHL... 6 Sliders for RHL: V1, V25 & V5... 7 RHL11... 8 Sliders for RHL11: V2 & V5... 9 Mounting Plates...
More informationLinear Motion. Rail guide tables
Linear Motion Rail guide tables The SKF Group The SKF Group is an international industrial corporation of AB SKF Sweden, founded in 1907, operating in 130 countries. The company has some 45000 employees
More informationServomech 1.4 BALL SCREW LINEAR ACTUATORS Series BSA
1.4 BALL SCREW LINEAR ACTUATORS Series BSA Technical features table SIZE FEATURES BSA 10 BSA 20 BSA 25 BSA 30 BSA 40 Rod diameter [mm] 25 25 30 35 40 Protective tube diameter [mm] 36 36 45 55 60 Motor
More informationCompact Linear Stage
Compact Linear Stage With DC or Stepper Motor L-505 Travel ranges 13 or 26 mm Stepper motor or DC servo motor with and without gearhead Velocity to 15 mm/s Load capacity to 30 N Integrated reference point
More informationLow profile slides type RTS
Low profile slides type RTS TECHNISCHE DATEN ASSEMBLY The mounting holes of each type are drilled to a standard configuration in slide-top and -base and permit the user a quick attachment into the application.
More informationRexroth Linear Motion Technology
Linear Modules Robotic Erector System for Linear Modules RE 82 402/2003-10 The Drive & Control Company 1 RE 82 402/2003-10 Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard
More informationR310EN 2302 ( ) The Drive & Control Company
R31EN 232 (26.4) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion Systems Basic Mechanical
More informationSV TYPE SV1/SV2. part number structure example H-8. rollers. number of rollers. stroke diameter. part number 1.5
SV TYPE SV1/SV2 part number structure example SVS 2 6 - RAS 2Z - UP accuracy grade specification blank high SV standard P precision SVS anticorrosion UP high-precision number of rollers cage type blank
More informationE Series Sealed Miniature Rocker and Lever Handle Switches
Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical
More informationStudying the Positioning Accuracy
Ball Screw Studying the Positioning Accuracy Causes of Error in the Positioning Accuracy Point of Selection Studying the Positioning Accuracy The causes of error in the positioning accuracy include the
More information