SLIDER ELECTRIC CYLINDER - BALL SCREW DRIVE (WITHOUT MOTOR) Specification. Repeatability (mm) ±0.01. Belt lead (mm)

Transcription

1 series Specification Model Repeatability (mm) ±0.01 Belt lead (mm) Rated thrust (N) Stroke (mm) Ball screw ø (mm) High rigidity linear guide (mm) 100~800 / 50 Pitch C7ø12 W H Home sensor Outside EE-SX672 (NPN) Built in - Stepping motor Max. speed (mm/s) Max. payload (kg) Horizontal Vertical Coupling(mm) 7 5 Max. static torque (N.m) 0. Sensor layout ight indicator(red) Servo motor 100 W Max. speed (mm/s) Main circuit oad OUT IC Under voltage DC 5~V Max. payload (kg) Horizontal Vertical output 100m Coupling (mm) 7 8 * When the stroke is longer than 600mm, resonance of the ball screw may occur depending on the operation conditions (critical speed). In this case, reduce the speed setting on the program by referring to the maximum speeds shown. Order example BC M C Model Spec. Stroke M10B Special order no. 100~800 mm 50 mm pitch Ball screw brand Ball screw lead Motor position Stepping motor brand Home sensor imit sensor T-Standard MIT 02 2 mm BC Exposed STEP motor Out side Out side 05 5 mm BM On lower side Tamagawa (TS3617N3E8) C Motor side 3 1 Pc mm BR On right side M Oriental (PK5-01) D Opposite motor side 4 2 Pcs B On left side Sanyo (103H ) No sensor No sensor Motor brand, power output, brakes E None 5 None 100W SERVO motor M P Y Mitsubishi Panasonic Yaskawa W B T Delta * Need not show B with no brake.

2 Performance charts llowable overhang N.m Horizontal installation B C ead 2 ead 5 ead 10 5kg kg kg kg kg kg Wall installation B C ead 2 ead 5 ead 10 5kg kg kg kg kg kg Vertical installation C ead 2 ead 5 ead 10 3kg kg 0 0 3kg kg Unit: N.m Static loading moment MY 16 MP 20 MR 19 Standard stepping motors Brand Max static torque C-Voltage Stepping motor model Compatible driver model Tamagawa 0. DCV 2-phase-TS3617N3E8 CD-2DM 200/400/800/1600 P/rev Oriental 0. Single-phase 100V 2-phase-PK5-01 UDK /400/800/1600/00 P/rev Sanyo 0. DCV 2-phase-103H US1D200P10 200/400/800/1600/00 P/rev Standard servo motors Brand Mark Brake Watp C-Voltage Motor model Compatible driver model Mitsubishi Panasonic Delta M P T No brake(horizontal type) HP-KP MR-J3-10 With brake(vertical type) HP-KPB MR-J3-10 No brake(horizontal type) MSMD012P1S MDDT1205 With brake(vertical type) MSMD012P1T MDDT1205 No brake(horizontal type) ECM-C20401ES SD-B20121-B With brake(vertical type) ECM-C20401FS SD-B20121-B

3 Stepping motor / Dimensions BC Motor exposed 52.3±1 Origin N KG BM lower side M N KG

4 Stepping motor / Dimensions B left side N KG BR right side N KG

5 Servo motor 100W / Dimensions BC Motor exposed Brake ±1 Origin N KG BM lower side M N KG

6 Servo motor 100W / Dimensions B left side N KG BR right side N KG