Introduction. Vertical centrifugal pumps. Horizontal centrifugal pumps. Filterchambers. Filter systems with vertical pump. with horizontal pump

Transcription

1 1 Introducton Vertcal centrfugal pumps Horzontal centrfugal pumps Flterchambers Flter systems wth vertcal pump Flter systems wth horzontal pump 7 Specfc applcatons 8 Fltermeda 9 Accessores 1 Informaton

2 l/h Typcal applcatons Platng - Rnsng - Fltraton Immerson length seres D9 7mm / D1 mm Envronmentally safe n-tank nstallaton Free turnng shaft - no seal Self prmng - can run dry Full length motor shaft Outlet sockets avalable n PP, PVDF and CPVC Optons Sucton extenson ppe Hose connecton D1 D9 Vertcal pumps seres D9 / D1 - PP/PVDF ft m D9 D9 D9 D9 1 D1 D1 D1 D1 7 A B 1 Info 1/R1 August 1 water C - 9/rpm - /Hz ft m 9 water C - 9/rpm - /Hz 1 7 Type 8 7 Materal D9 D9 D9 D9 PP/PVDF 11 kw 1 HP,1* 1/,18* 1/,* 1/,7* 1/ l/h us-gph Out(d/DN) Type 1 Materal D1 / D1 D1 PP/PVDF D1 * For -phase motors < V the ndcated motor wll be one sze bgger l / h us-gph kw HP,18 * 1/, * 1/,7 * 1/, / 1 max. Immerson length (mm) Out(d/DN) mn. / 7 Sucton extenson

3 l/h Typcal applcatons Platng - Rnsng - Fltraton Waste treatment Immerson length mm Envronmentally safe n-tank nstallaton Free turnng shaft - no seal Self prmng - can run dry Full length motor shaft Outlet sockets avalable n PP and CPVC Optons Sucton extenson ppe Hose connecton D mmerson length mm Vertcal pumps seres D11 - PP A ft m 9 water C - 9/rpm - /Hz,18,,7, Info 7/R Aprl 1 1 Type kw HP Out(d/DN) D PP,18* 1/* / D11---PP,* 1/* / 1 D11-7--PP,7* 1/* / D11---PP, / / * For -phase motors < V the ndcated motor wll be one sze bgger l / h us-gph B max. Immerson length (mm) mn. 7 Sucton extenson

4 . -. l/h Typcal applcatons Alkalne cleaners Electroless nckel D1-OT Sealless Self prmng Integral drve shaft Fume protecton Optons Sucton extenson ppe Customsed mountng plate Customsed mmerson length Out of tank verson (OT) MPT threaded dscharge ppe (X verson) 18 D D11-X (X = welded dscharge ppe and PP mountng plate) Vertcal pumps seres D1 - SS1 ft m 78 1 water C - 9/rpm - /Hz D11 D1 D1 D1 ft m water C - 9/rpm - /Hz D1 D17 D18 D A B Info /R September l / h us-gph Type kw HP Immerson In Out Out X length (mm) BSP BSP BSP D11-(X)(OT),7 ½ 7 ¾" ¾" ¾" D1-(X)(OT), " 1" 1" D1-(X)(OT) 1,1 1½ 8 1¼" 1" 1¼" D1-(X)(OT) 1, 9 1½" 1¼" 1½" 11 l / h us-gph Type kw HP Immerson In Out Out X length (mm) BSP BSP BSP D1-(X)(OT), 9 1½" 1¼" 1½" D17-(X)(OT) 99 " 1½" 1½" D18-(X)(OT) ½ 99 " 1½" " D19-(X)(OT), 7 99 " 1½" " 1 7 max. mn. Immerson length (mm) Sucton extenson

5 1. -. l/h Typcal applcatons Platng - Rnsng - Fltraton Waste water treatment - Scrubbers Immerson length mm Envronmentally safe n-tank nstallaton Free turnng shaft - no seal or bearng Self prmng - can run dry Wde range of motor currency Full length stanless steel motor shaft Outlet sockets avalable n PP, PVDF and CPVC GF unon connecton All fasteners stanless steel 1µm chemcal resstant coatng Optons Sucton extenson ppe Hose connecton Customzed mountng plate Out of Tank model FIP thread connecton Impeller blockng Fume lock Hgh Pressure model (HD) Specal models for phase V duty D18---PP Vertcal pumps seres D18 - PP/PVDF m Water C - 9rpm - Hz Type Materal Motor (kw) INom * (A) Out (d/dn) D18-1-, 1, / A B D18-18-,7 1, / Info 171/R1 August 1 1 ±1% 1 l/h D18-- 1,1, / D18-- 1,, / PP/PVDF D18--,, / D18--,7 / D18--HD- / D18-1-HD- / * V-ph-Hz 1 7 max. mn. Immerson length (mm) Sucton extenson

6 H (m) 8 7 Water C - 9rpm - Hz ±1% Q (m³/h) Curve Type D18-1--PP/PVDF D PP/PVDF D18---PP/PVDF D18---PP/PVDF D18---PP/PVDF D18---PP/PVDF D18--HD--PP/PVDF D18-1-HD--PP/PVDF D PVDF The black pump body of the PVDF verson s made out of Carbon Fber Renforced PVDF to mnmze thermal expanson, mantanng maxmum effcency at elevated temperatures. H (m) 8 7 Water C - 9rpm - Hz ±1% Q (m³/h) Hendor - Qualty Pumps & Flters

7 . -. l/h Typcal applcatons Platng Rnsng Fltraton Waste treatment Scrubbng Avalable n PP or NPP Immerson length mm Envronmentally safe n-tank nstallaton Free turnng shaft - no seal Self prmng - can run dry Full length motor shaft Outlet sockets avalable n PP, PVDF and CPVC Optons Sucton extenson ppe Out-of-Tank model Vapour lock Straner D-/--PP Vertcal pumps seres D m Type D-/8--PP Info 177/R February 1 Out (d/dn) D-/--PP D-/--PP A / 1 B max. Immerson length (mm) 1 mn. 1 m/h 7 Sucton extenson

8 1 D-/--PP D-/--PP D-/8--PP water C - 9rpm - Hz H (m) ±1% 1 1 Q (m³/h) = Best Effcency Pont ±1% P (kw) Q (m³/h) Hendor - Qualty Pumps & Flters

9 l/h Typcal applcatons Platng Rnsng Fltraton Waste treatment Scrubbng Avalable n PP or NPP Immerson length mm Envronmentally safe n-tank nstallaton Free turnng shaft - no seal Self prmng - can run dry Full length motor shaft Outlet sockets avalable n PP, PVDF and CPVC Optons Sucton extenson ppe Out-of-Tank model Vapour lock Straner D-/7--PP Vertcal pumps seres D m Type Info 178/R February 1 A / D-/--PP 1 B max. D-/9--PP D-/7--PP 7/ D-7/--PP D-1/--PP 8 1 m/h 7/ Immerson length (mm) D-8/--PP D-9/8--PP Out (d/dn) D-/7--PP D-/--PP mn. 7 Sucton extenson

10 1 D-/7--PP D-/--PP D-/--PP D-/9--PP D-/7--PP D-7/--PP water C - 9rpm - Hz water C - 9rpm - Hz H (m) H (m) ±1% 1 1 ±1% Q (m³/h) = Best Effcency Pont Q (m³/h) = Best Effcency Pont 11 ±1% 9 ±1% P (kw) P (kw) Q (m³/h) Q (m³/h) D-8/--PP D-9/8--PP D-1/--PP water C - 9rpm - Hz 9 H (m) ±1% ±1% P (kw) 11 Q (m³/h) = Best Effcency Pont Q (m³/h) Hendor - Qualty Pumps & Flters

11 New 1 rpm l/h Typcal applcatons Desgned and developed for low lfe cycle cost n corrosve low pressure applcatons Scrubbng (fume and ar) Waste water treatment Rnsng Low energy consumpton due to hgh hydraulc effcency and IE class Premum Effcency Motor Machned hgh grade Smona AlphaPlus PP Elastomers EPDM Sealless pump, can run dry endlessly Round mountng plate for easy nstallaton Includng dscharge ppe wth GF unon Impeller locked (no damage wth wrong rotaton drecton) Overszed motor accordng to Hendor heavy duty specfcatons Stanless steel shaft and fasteners (no metal n contact wth lqud) Motor pole, IP, Class F, S1 Duty and PTC-1 Double layer C chemcal resstant coatng Hostng eyes for easy lftng and transportaton CE and usulc certfed complyng wth IEC standards D-11/1--PP Optons GF unon connecton socket n PVC or CPVC Sucton extenson ppe Sucton straner FPM (Vton ) elastomers Vapour lock Foam rubber seal n mountng plate Flange dscharge connecton Customzed mountng plate Customzed color Extra ant-corroson coatng on motor Voltages outsde standard range Vertcal pumps seres D - D Info 1777/R August 1 m m/h Type D-9/1--PP D-11/1--PP D-11/1--PP D-1/1--PP D-1/1--PP D-1/1--PP Out (d/dn) 9/7 11/9 1 7 A max. mn. B Immerson length (mm) Sucton extenson

12 1 1 1 water C - 1rpm - Hz H (m) D-9/1--PP D-11/1--PP D-11/1--PP ±1% Q (m³/h) ±1% P (kw) Q (m³/h) D-1/1--PP D-1/1--PP D-1/1--PP water C - 1rpm - Hz 1 H (m) ±1% Q (m³/h) 8 ±1% 7 P (kw) Q (m³/h) Hendor - Qualty Pumps & Flters

13 . -. l/h Sutable for Agressve low vscosty acds and alkalnes Typcal applcatons Chemcal, envronmental and process ndustry Long lfe, heavy duty constructon Desgned for non-pressurzed tanks Vapour lock No bearngs Sealless Can run dry Vton O-rngs Max. temperature 8ºC Dscharge flange DIN1 - PN1 Threaded NPT connecton for sucton extenson or straner Electrc motor ABB IEC IM B, -P, IP, /9V ncl. PTC thermstors Optons EPDM O-rngs Horzontal dscharge ppe Sucton extenson ppe <1mm Sucton straner Customzed mountng plate Pump-tank gasket Motor drp cover Customzed motor colour Specal motorflange for Amercan market D Vertcal pumps seres D - PP A B ft m 99 water C - 1rpm - Hz Q max H max Type Motor Immerson In Out Weght m/h m kw HP length (mm) DN(mm) DN(mm) kg 9 18 D 7, Info 7/R September 1 D D 1 1 D D 1 D7 18, 9 9 D8 1 1 D9 7 1 m/h 99 1 us-gpm 1 7 max. mn. Immerson length (mm) Sucton extenson

14 1. -. l/h Typcal applcatons Ideal for clean or slghtly contamnated acds and alkalnes Sutable for most platng solutons Not sutable for electroless nckel and abrasve solutons or solutons whch contan ferrous partcles Magnetc drve Sealless, therefore leakfree Provde extra safety factor for agressve and expensve lquds Standard wth GF unon connetons wth a choce of sockets, avalable n PP, PVDF and CPVC Max. temp. PP 8 C / 17 F, PVDF 1 C / 1 F Motor wth two component Polyurethane coatng for excellent chemcal resstance Optons Hose adapters M1 111 PVDF only out n 1C 1B 1A 119 Magnetc drve pumps M1/11/1 - PP/PVDF ft m water C - 9/rpm - /Hz M1 M11 M1 Type Motor Max SG Net weght In Out Dmensons (mm) kw HP at BEP kg d/dn d/dn L W H M1 1, M11,18 * 1/ * 1, / /1 1 1 M1 1,19 * For -phase motors < V the ndcated motor wll be,kw = 1/HP d/dn = OD/ID metrc sze ppe W H Info 1/R1 Aprl 1 1 ± 1 % 1 l / h 79 us-gph Best Effcency Pont (BEP) L

15 l/h Typcal applcatons Ideal for clean or slghtly contamnated acds and alkalnes Sutable for most platng solutons Not sutable for electroless nckel and abrasve solutons or solutons whch contan ferrous partcles Magnetc drve Sealless, therefore leakfree Provde extra safety factor for agressve and expensve lquds Standard wth GF unon connetons wth a choce of sockets, avalable n PP, PVDF and CPVC Max. temp. PP 8 C / 17 F, PVDF 1 C / 1 F Motor wth two component Polyurethane coatng for excellent chemcal resstance Optons Hose adapters Flanges Prmng chamber Dry run protecton MX out n MX9 self prmng 119 1C 1B 1A Magnetc drve pumps MX PP/PVDF Info 7/R1 Aprl 1 ft m ± 1 % water C - 9/rpm - /Hz MX MX MX9 MX1 8 1 l / h us-gph Type Motor Max SG Net weght In Out Dmensons (mm) kw HP at BEP kg d/dn d/dn L W H MX,18* 1/ 1,1 7 / / MX,* 1/ 1 7 / / MX1,7* 1/ 1, 1 / / 1 18 MX, / 1, 11 / / 1 18 MX9,7 1/ 1, 1 / / 1 18 MX91, / 1, 11 / / 1 18 MX1, / 1, 11 / / 1 1 * For -phase motors < V the ndcated motor wll be one sze bgger. d/dn=od/id metrc sze ppe Best Effcency Pont (BEP)

16 Only -kw l/h Typcal applcatons Ideal for clean or slghtly contamnated acds and alkalnes Sutable for most platng solutons Not sutable for electroless nckel and abrasve solutons or solutons whch contan ferrous partcles Magnetc drve Sealless, therefore leakfree Provde extra safety factor for agressve and expensve lquds Standard wth GF unon connetons wth a choce of sockets, avalable n PP, PVDF and CPVC Max. temp. PP 8 C / 17 F, PVDF 1 C / 1 F Motor wth two component Polyurethane coatng for excellent chemcal resstance Optons Hose adapters Flanges Prmng chamber Dry run protecton M kW Excl out n 1C 1B 1A 119 Magnetc drve pumps M11.. M - PP/PVDF ft m 99 1 water C - 9/rpm - /Hz M11 M1 M M M Type Motor Max SG Net weght In *) Out *) Dmensons (mm) kw HP at BEP kg d/dn d/dn L W H M11 1,1 1-1/ 1, 1, / / 1 1 M1 1, 1, 17, / / M, 1, / / M 1, 7 / / 1 19 M -1/ 1, / / 8 79 H ± 1 % 1 l / h 8 79 us-gph Info 1/R June ft m 99 1 M1-H M-H M-H ± 1 % 1 1 l / h us-gph M1-H 1, 1, 17, / / M-H, 1, / / M-H 1, 7 / / 1 19 *) d/dn=od/id metrc sze ppe Best Effcency Pont (BEP) L W

17 1. -. l/h New Reduced power consumpton through ncreased effcency Typcal applcatons Hazardous and toxc solutons Acds, alkalnes and other corrosve lquds Platng, pre- and post-treatment solutons Magnetc coupled, sealless provdng maxmum safety Hgh power Neodymum rare-earth magnets Increased effcency by ncorporated vortex chamber Robust structure provdng relable and secure performance Hghly durable PP allowng temperatures up to 8 C Standard wth GF unon connetons wth a choce of sockets Modular desgn for easy and low cost mantenance Qualty fasteners out of passvated Stanless Steel European made motor wth acd resstant 7 µm C PU coatng Optons Hose adapters or flanges Prmng chamber Dry run protecton SC and other specal coated bearngs Frequency nverter Atex electrc motor MX MX MX1 Magnetc drve pumps MX1.. MX1 - PP Info 179/R June 1 m 1 ±1% Water C - 9/rpm - /Hz 1 l/h Type Motor (kw) INom * (A) In (d/dn) Out (d/dn) MX1 - PP,7 1,8 / / MX1 - PP 1,1, / / MX - PP 1,,8 / / MX - PP,,1 / / MX1 - PP,7 / / * V-ph-Hz

18 water º C - 9rpm - Hz H (m) ±1% 1 1 = Best Effcency Pont Q (m /h) Motor (kw) INom * (A) In (d/dn) Out (d/dn) L (mm) W (mm) H (mm) Weght (kg) 1 MX1 - PP,7 1,8 / / 11, 1 7 1, MX1 - PP 1,1, / / 11, 1 7 1,8 MX - PP 1,,8 / / 17, MX - PP,,1 / / 1 *,9 MX1 - PP,7 / / 19,9 * V-ph-Hz * motor = 17mm ^ H L ^ W ^ Hendor - Qualty Pumps & Flters

19 7. -. l/h Typcal applcatons Ideal for abrasve solutons or those that contan ferrous partcles Sutable for most platng solutons Not sutable for electroless nckel Mechancal seal materal depends on applcaton Tradtonally cost effectve to purchase and mantan Standard wth GF unon connetons wth a choce of sockets, avalable n PP, PVDF and CPVC Max. temp. PP 8 C / 17 F Motor wth two component Polyurethane coatng for excellent chemcal resstance Optons Hose adapters Flanges Prmng chamber Dry run protecton S Mechancal seal pumps S.. S - PP water C - 9/rpm - /Hz ft m 79 S S7 S11 S1 S S 1 Info 1/R June 8 Motor Max SG Net weght kw HP at BEP kg S S7 S11 S1 S S, ¾,7 1 1,1 1½ 1,, 1,1 1, 1, 1, 1, 1, In *) Out *) d/dn d/dn Dmensons (mm) L W H / / / / / / / / / / / / W *) d/dn=od/id metrc sze ppe ± 1 % Type H l/h us-gph Best Effcency Pont (BEP) L

20 1. -. l/h Typcal applcatons Crculaton pump for electroplatng, heat exchangers, hot alkalne lquds, ols, degreasng baths Arplane jet engne cleanng plants, petrochemcal ndustry Laboratory applcatons, brewery operatons, fltraton, envronment engneerng Also sutable for vscous or contamnated lquds and lquds contanng metallc partcles Open mpeller Mechancal seal PTFE/Ceramc/Carbon or SC Hghest chemcal resstance also at hgh temperatures Robust, thck-walled desgn stanless steel Long-lastng and wear resstant Max. temperature 1 C Versatle, quet and compact Optons EX/ATEX motors Centrfugal pump wth mechancal seal - SS1 ft Water C - 9/rpm - /Hz SH8 SH1 SH11 SH1 ± 1 % 9 l / h us-gph Type SH8 SH1 SH11 SH1 Motor kw,18,18,, Qmax l/h 18 9 Hmax m In Out ½" ¾" ¾" 1" ½" ¾" ¾" 1" Dmensons (mm) *) L W H W H L Info 181/R January 1 ft m SH1 SH17 SH19 SH1 ± 1 % 1 l / h 8 79 us-gph SH1 SH17 SH19 SH1 1,1,, 1 8 Selecton: SH1-,-SS ¼" 1½" 1½" " 1" 1¼" 1¼" 1½" *) Measures are defntve

21 - 9. l/h Typcal applcatons Platng and process ndustry Envronmentally safe n-tank nstallaton Compact flter system Sealless pump, can run dry Self prmng Optons Customsed mountng plate Sucton extenson ppe CPVC/PVDF sockets or Hose connecton Manometer for seres 11 DFIT1-71Z-K-PP DFIT9-11Z-B-PP DFIT9-11Z-K-PP DF9-11Z-K-PVDF Flter systems seres DF9/DF1 - PP/PVDF K = cartrdges Qty x L 11Z-K = 1 x 1" 1Z-K = x 1" 71Z-K = 7 x 1" P = dscs Qty OD/ID 1Z-P = x 1/ 71Z-P = x / B = bag L x OD (mm) 1Z-B = x 1 B1 = x 1 B = x 1 71Z-B1 = x 18 Info 1/R Aprl 1 Chamber Medum Materal Qmax l/h DF9 DFIT9 11Z K Selecton: DFIT1-71Z - K - PP Hmax m Motor* kw Immerson length (mm) Mountng plate (mm) Connecton outlet 1 x 18 ¾" hose PP/PVDF 18,1 7 DFIT9 - B1/B - - DF9 DFIT9 1Z K P B PP 7 x d/dn,18 7 DFIT9 - B1/B PP/PVDF - - DFIT1 11Z K PP/PVDF 18,18 x ¾" hose DFIT1/1 1Z K P B PP x d/dn 18/ /7,18/, DFIT1/1 - B1/B PP/PVDF - - DFIT1/1 71Z K P PP/PVDF 7 x d/dn DFIT1/1 71Z B1 PP 7/9 8/9,7/, 7 x d/dn DFIT1/1 - B1/B PP/PVDF - - * For -phase motors < V the ndcated motor wll be one sze bgger. standard maxmum pressure C F Mpa bar ps 8,, 11,, 8 17,,

22 l/h Typcal applcatons Platng and process ndustry Envronmentally safe n-tank nstallaton Compact flter system Sealless pump, can run dry Self prmng Optons Customzed mountng plate Sucton extenson ppe Hose connecton Out of Tank model FIP thread connecton Fume lock Bag flters SS flter systems Specal models for phase V duty DFIT Z-K-PP Flter systems seres DF18 - PP/PVDF K = cartrdges Qty x L 71A-K = 7 x 1" 11A-K = 1 x 1" P = dscs Qty OD/ID 71A-P = x / 11A-P = x 8/ B = bag L x OD (mm) 7A-B1 = x 18 standard maxmum pressure Info 178/R Aprl 1 DF18-18 DF18- Type Chamber Medum Materal Qmax l/h DFIT18-18 DFIT18- Selecton: 71A K P PP/PVDF DFIT Z - K - PP Hmax m Motor kw Immerson length (mm) Mountng plate (mm) Connecton outlet x d/dn 11A K P PP 8 1,7 7 x d/dn 7A B1 PP x d/dn 71A K P PP/PVDF x d/dn 11A K P PP , 7 x d/dn 7A B1 PP x d/dn C F Mpa bar ps 8,, 11,, 8 17,,

23 1. -. l/h Cartrdges Typcal applcatons Platng and process ndustry Magnetc drve pump Flter chamber wth welded bottom (no seal) One or two flter chambers (parallel or seral) Strng wound, spunbonded, pleated or carbon cartrdges All PP or PVDF constructon Max. temperature PP 8 C / PVDF 1 C Unons for rgd ppng (PP, PVDF or CPVC sockets) Standard wth phase motor, thermal overload swtch, lead wthout plug, ar release and dran valve Optons Hose connecton Pressure gauge Sngle phase motor Swtch wth auxlary contact Sngle open end cartrdges PVDF Vton M1-A-K-PP Flter Systems seres 1 M1-11A-K-PP K = cartrdges Qty x L 11A-K = 1 x 1" 1A-K = 1 x " Info 7/R1 July 1 Pump l/h kw* Unon (d/dn) Hose Type Chamber Medum Materal In Out In Out 11A Magnetc drve 1,18 M1 1A PP-EPDM,18 / / 1¼ 1 M11 K 1A PVDF-Vton,18 M1 A Selecton: M1 A K PP * For -phase motors < V the ndcated motor wll be one sze bgger. Parallel fltraton Qty x L 1A-K = x 1" A-K = x " Seral fltraton Qty x L 1AS-K = x 1" AS-K = x "

24 . -. l/h Dscs, cartrdges Typcal applcatons Platng and process ndustry Servce frendly, deal cleanng access heght Magnetc drve pump Flter chamber wth welded bottom (no seal) Dscs (thn/thck paper, cloth) or cartrdges All PP constructon Max. temperature PP 8 C Bottom-out or top-out model Choce of slurry tank for carbon treatment, mxng and prmng Unons for rgd ppng (PP or CPVC sockets) Standard wth phase motor, thermal overload swtch, lead wthout plug, pressure gauge, ar release and dran valve Optons Hose connecton Dry run protecton Contact manometer Sngle open end cartrdges Slurry tank Sealpump Vton MX-A-P-S-PP Flter Systems seres M1-1A-K-PP Info 79/R1 July 1 Pump l/h kw* Unon (d/dn) Hose Type Chamber Medum Slurrytank Materal In Out In Out Magnetc drve,18 M1 1A / / 1¼ 1 S,18 MX A K/P PP-EPDM **, / / 1¼ 1¼ MX lter 1 lter ** Only wth A flter chamber Selecton: MX A P S PP * For -phase motors < V the ndcated motor wll be one sze bgger. K = cartrdges Qty x L 1A-K = x 1" A-K = x " P = dscs Qty OD/ID m² 1A-P = x 1/, A-P = x 1/,9

25 l/h Dscs, cartrdges Typcal applcatons Platng and process ndustry Servce frendly, deal cleanng access heght Magnetc drve pump Flter chamber wth welded bottom (no seal) Dscs (thn/thck paper, cloth) or cartrdges All PP or PVDF constructon Max. temperature PP 8 C / PVDF 1 C Bottom-out or top-out model Choce of slurry tank for carbon treatment, mxng and prmng Unons for rgd ppng (PP, PVDF or CPVC sockets) Standard wth phase motor, thermal overload swtch, lead wthout plug, pressure gauge, ar release and dran valve Optons Hose connecton Dry run protecton By pass wth flowmeter Contact manometer Sngle open end cartrdges Slurrytank Sealpump PVDF and Vton MX-71A-K-PP Flter Systems seres 7 MX9-7A-P-S-PP Info 7/R1 July 1 Pump l/h kw Unon (d/dn) Hose Type Chamber In Out In Out Magnetc drve *, MX (PP/PVDF) 8 *,7 / / 1¼ 1¼ MX9 71A 1, / / 1½ 1¼ MX1 7A ** 1,7 MX1 / / 1½ 1½ ** 18 1,1 MX1 ** Only wth 7A flterchamber Medum K/P Slurrytank S 1 lter 1 lter Materal PP-EPDM PVDF-Vton Selecton: MX 71A K PP * For -phase motors < V the ndcated motor wll be one sze bgger. K = cartrdges P = dscs Qty x L 71A-K = 7 x 1" 7A-K = 7 x " Qty OD/ID m² 71A-P = x / 1, 7A-P = x /,1

26 l/h Dscs, cartrdges Typcal applcatons Platng and process ndustry Servce frendly, deal cleanng access heght Magnetc drve pump Flter chamber wth welded bottom (no seal) Dscs (thn/thck paper, cloth) or cartrdges All PP constructon Max. temperature PP 8 C Bottom-out or top-out model Choce of slurry tank for carbon treatment, mxng and prmng Unons for rgd ppng (PP or CPVC sockets) Standard wth phase motor, thermal overload swtch, lead wthout plug, pressure gauge, ar release and dran valve Optons Hose connecton Dry run protecton By pass wth flowmeter Contact manometer Sngle open end cartrdges Slurrytank Sealpump Vton MX-11A-K-PP MX-1A-P-S-PP Flter Systems seres 1 Pump kw 1,7 1,1 1, * *, Unon (d/dn) In Out / / / / / * Only wth 1A flterchamber / Hose In Out 1½ 1½ ½ ½ Selecton: Type Chamber Medum Slurrytank Materal K = cartrdges Qty x L 11A-K = 1 x 1" 1A-K = 1 x " MX1 MX1 11A MX 1A MX K/P Info 77/R1 July 1 Magnetc drve l/h PP-EPDM 18 lter 11A K P = dscs Qty 1 lter MX1 MX S PP OD/ID m² 11A-P = x 8/ 1,9 1A-P = x 8/,8

27 l/h Cartrdges Typcal applcatons Platng and process ndustry Servce frendly, deal cleanng access heght Magnetc drve or mechancal seal pump Flter chamber wth welded bottom (no seal) DOE cartrdges All PP constructon, max. temperature PP 8 C Unons for rgd ppng (PP, PVDF or CPVC sockets) Standard wth phase motor, thermal overload swtch, lead wthout plug, pressure gauge, ar release and dran valve Optons Hose connecton Dry run protecton Contact manometer By pass wth flowmeter Sngle open end cartrdges Vton MX-A-K-PP Flter Systems seres Info 8/R July 1 Pump l/h kw Unon (d/dn) In Out Hose In Out Magnetce drve 1, / / " " MX, MX / / ½" ½" MX1 Mechancal seal 18 1, / / " " S1, S / / ½" ½" S Type Chamber Medum Materal A K PP-EPDM Selecton: MX A K PP K = cartrdges Qty x L A-K = x "

28 l/h Dscs, cartrdges, bags Typcal applcatons Platng and process ndustry Servce frendly, deal cleanng access heght Magnetc drve or mechancal seal pump Flterchamber wth welded bottom (no seal) Thn dscs (large flter area) or thck dscs (large drt holdng capacty) Flter paper (thn/thck), cloth, cartrdges or bags Dscs can be removed n manageable stacks All PP constructon, max. temperature 8 C Wheels for portablty may be removed once nstalled Multfunctonal large round slurry tank wth slopng bottom Unons for rgd ppng (PP, CPVC sockets) Standard wth phase motor, lead wthout plug, pressure gauge, ar release and dran valve Optons Hose connecton, dry run protecton, contact manometer Flanges Vton MX1-A-P-PP b MX1-A-P-S-PP -MX1--A-P-S-PP Flter Systems seres Info 8/R1 July 1 Pump l/h kw Unon (d/dn) Type In Out Chamber Magnetc drve, MX1, 9/7 9/7 MB (-) A Mechancal seal 8, SB1, 9/7 9/7 SB1 7, SB1 Medum K P Ph B Slurrytank Opton S 18 lter Materal PP-EPDM Selecton: MX1 A P S PP K = cartrdges P = dscs B = bags Qty x L A-K = x " Qty OD/ID m² A-P = 1 x /1 9 A-Ph = x /1 Qty L/OD Z-B = 7 x /1

29 1. -. l/h Bag Typcal applcatons Platng and process ndustry Bag Fltraton Large drt holdng capacty Easy bag change Low operatng cost Bag Fltraton Plus Bag wth PP mcro fbres Ol / grease Gel lke sludge Carbon purfcaton Effcent removal of organc mpurtes Optons Hose connecton Vton Buna / NBR Multple bag chambers for larger volumes Stanless Steel bag flter systems MX-7A-B-FM-PP Mult purpose bag flter systems MX-7A-B1-PP Pump l/h kw Unon (d/dn) Hose Type Chamber In Out In Out Magnetc drve *,18 / / 1¼ 1 M11 *,18 MX Flow Control Materal No flow control Info 71/R1 July 1,* / / 1¼ 1¼ MX 8,7* MX9 1, / / 1½ 1¼ MX1 1,7 MX1 / / 1½ 1½ 18 1,1 MX1 1, / / 1½ MX 7A-B1 7A-B FM Selecton: MX 7A-B FM PP * For -phase motors < V the ndcated motor wll be one sze bgger. FF PP-EPDM L x OD (mm) 7A-B1 = x 18 7A-B = 8 x 18 FM = Manual flow control FF = Automatc flow control wth frequency nverter

30 Hendor "E" Fltraton Systems Practcal flter pumps for optmal fltraton wth PP mcrofbers Typcal applcatons Mcrofbers Type SP (spaghett) absorbs non emulsfed ol out of emulsfed cleaners Mcrofbers Type AH removes gel-lke sludge, lke SN + Mcrofbers can be reused Absorbs -8 tmes ts own weght Huge flter surface area and hgh vods volume Optons Flowmeter By pass for flow control By pass wth flowmeter MX-A-E-PP Flter Systems seres E Pump Type l/h kw Flter-basket In (d/dn) Out (d/dn) Mcrofbers Info 198/R1 October 1 Magnetc drve MX-71A-E-PP,18 1 x 8L / / MX9-7A-E-PP 8,7 1 x 1L / / MX1-1A-E-PP 1 1,1 x 1L / / MX-A-E-PP, x L / / Mechancal seal S-7A-E-PP, 1 x 1L / / S-1A-E-PP, x 1L / / S-A-E-PP x L / / Type SP Boxes of and kg Type AH Boxes of kg

31 Hendor Recovery Cell Why use HRC? to recover precous metals to remove metal from waste streams to reduce (rnsng) water consumpton to avod troublesome technques to convert recovered precous metals back to lquds/producton How t works A fne metallc matrx s nserted nto a cylndrcal cathode. The constant turbulence caused by the Hendor HRC system exposes the cathode contnuously to fresh ons. Thus plate out up to very low concentraton s guaranteed. The cathode can be removed easly. Accountablty s assured, smply by weghng, samplng or meltng the cathode. Advantages Low energy operatng costs Optmal hgh speed separaton Inexpensve/dsposable cathodes Precse record keepng + metal extracton Easy nexpensve processng Lttle floor space requred M1-HRC-PP 7, kg slver n weeks! Case hstory Galvano Hengelo BV Robn Smt Hendor Recovery Cell (HRC) MX--HRC-PP Type Flow l/h Motor kw In d/dn Out d/dn Cathodes M1-HRC-PP,18 1x" MX-HRC-PP, 1x" / / MX9--HRC-PP,7 x" Max. temperature ºC Mn. temperature 1ºC Max. voltage 1V Max. current A MX1--HRC-PP, x" Info 18/R1 May 1 Standard unt ncludes Anode = Irdum mx-oxde/ttanum stretch metal or mx-oxde ruthenum (chlorous envronment) Cathode = copper or stanless steel Magnetc drve pump wth phase motor Unon connectons Not ncluded Rectfer 1V/1A Optons 1 phase motor Hose connectons Pre flter or end flter Rectfer Hgh currenct verson A

32 Automatc Recovery Cell Why use HRC? to recover precous metals by electrownnng to remove metal from waste streams to reduce (rnsng) water consumpton to avod troublesome technques to convert recovered precous metals back to lquds/producton to reduce cost How t works A fne metallc matrx s nserted nto a cylndrcal cathode. The constant turbulence caused by the Hendor HRC system exposes the cathode contnuously to fresh ons. Thus plate out up to very low concentraton s guaranteed. The cathode can be removed easly. Accountablty s assured smply by weghng the cathode before sendng out to the refnery. Advantages Full PP constructon Low energy operatng costs Optmal hgh speed separaton Inexpensve/dsposable cathodes Precse record keepng + metal extracton Easy nexpensve processng Lttle floor space requred Hgh qualty 1W pe rectfer HRC- HRC- 7, kg slver n weeks! Case hstory Galvano Hengelo BV Robn Smt September 1 Type Flow l/h Motor kw In hose Out hose Cathodes HRC-,7 1x" Max. temperature ºC Mn. temperature 1ºC Max. voltage 1V Max. current 1A Info 17/R November 1 Standard unt ncludes Anode - Ir MMO coated Ttanum Cathode - Copper or Stanless Steel Magnetc drve pump wth 1 phase motor Hose connectons Dran valve Prmng hand pump Rectfer pe11 Control unt pe8 wth multfuncton dsplay Short-cut alarm and swtch-off (flash lght + busbar) Protecton grade IP Optons Pre flter or end flter Wthout rectfer Mult cell verson

33 Economc Functonal Sustanable l/h Cartrdge flter Typcal applcatons Platng, processes and laboratores Magnetc drve pump Flter chamber wth welded bottom (no seal) PP constructon, non-metallc soluton contact EPDM elastomers Cartrdge tghtened by knob, no by-pass Ar release valve Dran valve Max. temperature 7 C Hose connecton, n & outlet same dameter Sngle phase motor wth thermal protecton On/Off swtch IP and cable ncluded Bofl-1K-18 Bofl-11K-1 Flter Systems 1K Bofl Seres Info 17/R March 1 m ± 1 % water C - 7rpm - Hz Bofl-11K-1 Bofl-1K l / h Type Flow Head Flter Connectons Motor (Hz) max (l/h) max (m) Cartrdge In Out Watt Phase Voltage Amp RPM Bofl-11K-1 1,1 1 x 1" 18 mm hose 1 ~, 7 Bofl-1K-18 1, 1 x " mm hose 11 1 ~, 7 Specfc gravty max. 1,1 kg/dm³ Vscosty max. cp

34 Bofl-11K-1 O 1 O O 7 OUT DRAIN 9 IN O 18 Bofl-1K-18 O 1 O OUT IN O O O 9 7 IN O O OUTDRAIN O 9 7 DRAIN revson number + date drw. rejnders revson mat. number + date drw. rejnders scale 1: mat. scale 1: Hendor - Qualty Pumps & Flters date --1 date Man Man chk. RR chk. RR Overall tolerance ± 1 mm Overall Angle tolerance ± 1

35 1. -. l/h Cartrdge Typcal applcatons Platng and process ndustry Compact and robust, servce frendly Flter chamber wth welded bottom (no seal) Strng wound, spunbonded, pleated or carbon cartrdge (max. Ø 7mm) All PP or PVDF constructon Max. temperature PP 8 C / PVDF 1 C Unons for rgd ppng (PP, PVDF or CPVC sockets) Optons Hose connecton (Contact) manometer Sngle open end cartrdge Customsed mountng plate F-11Z-K-PP FIT-11Z-K-PP ft 1 m Pressure loss / flowrate K 1. 1 l / h us-gph F-11H-K-PP F-11A-K-PP Flter chambers F11/1 PP/PVDF F FIT Medum Materal In Out 11A/1A 11Z/1Z 11H/1H 11Z/1Z K PP/PVDF d/dn1 Selecton: F - 11Z - K - PP maxmum pressure C F Mpa bar ps 8,, 11,, 8 17,, Info 9/R May 9 K = cartrdges Qty x L 11-K = 1 x 1" 1-K = 1 x "

36 . -. l/h Dscs, cartrdges, bag Typcal applcatons Platng and process ndustry Compact and robust, servce frendly Flter chamber wth welded bottom (no seal) Dscs (thn/thck paper, cloth), cartrdges (max. Ø 7mm) or pleated bag All PP constructon Top plate made of glass-flled PP Max. temperature PP 8 C External fasteners n SS1 Unons for rgd ppng (PP or CPVC sockets) Optons Hose connecton Contact manometer Sngle open end cartrdges Customsed mountng plate Four PP legs (standard mm) External fasteners n ttanum or electroless nckel coated F-1A-K-PP ft m 1 Pressure loss / flowrate. K P 1 l / h 8 1 us-gph Flter chambers F1/ PP F FIT (n tank) Medum Materal In Out 1/ 1A/A 1Z/Z 1A/A 1Z/Z 1L/L K/P/D/PC PP d/dn Selecton: F - 1A - K - PP standard maxmum pressure C F Mpa bar ps 8,, 11,, 8 17,, Info 9/R May 9 K = cartrdges Qty x L 1-K = x 1" -K = x " P = dscs Qty OD/ID m² 1-P = 7() x 1/,(,) -P = 9() x 1/ 1,(,9) D = pleated bag *) L m² 1-D = 1", -D = ",7 PC = dscs + carbon bag 1-PC = 1 dscs + carbon bag (L.) -PC = 7 dscs + carbon bag (7,L.) *) For flter chambers wth GAF-type flter bags, see separate leaflet

37 l/h Dscs, cartrdges, bag Typcal applcatons Platng and process ndustry Compact and robust, servce frendly Flter chamber wth welded bottom (no seal) Dscs (thn/thck paper, cloth), cartrdges (max. Ø 7mm) or pleated bag All PP or PVDF constructon Top plate made of glass-flled PP Max. temperature PP 8 C / PVDF 1 C External fasteners n SS1 Unons for rgd ppng (PP, PVDF or CPVC sockets) Optons Hose connecton Contact manometer Sngle open end cartrdges Customsed mountng plate Four PP legs (standard mm) External fasteners n ttanum or electroless nckel coated F-71A-K-PP ft m Pressure loss / flowrate 1 P K 9 l / h 8 1 us-gph FIT-71A-P-PP Flter chambers F71/7 PP/PVDF F FIT (n tank) Medum Materal In Out 71/7 71A/7A 71Z/7Z 71A/7A 71Z/7Z 71L/7L K/P/D/PC PP/PVDF d/dn Selecton: F - 71A - K - PP standard maxmum pressure C F Mpa bar ps 8,, 11,, 8 17,, opton hgh pressure model C F Mpa bar ps Info 91/R May 9 K = cartrdges Qty x L 71-K = 7 x 1" 7-K = 7 x " P = dscs Qty OD/ID m² 71-P = 7() x / 1,(1,) 7-P = 9() x /,(,1) D = pleated bag *) L m² 71-D = 1",8 7-D = " 1, PC = dscs + carbon bag 71-PC = 1 dscs + carbon bag (8L.) 7-PC = 7 dscs + carbon bag (1L.) *) For flter chambers wth GAF-type flter bags, see separate leaflet 8,, 8 1,, ,,

38 1. -. l/h Bag Typcal applcatons Platng and process ndustry Bag Fltraton Large drt holdng capacty Easy bag change Low operatng cost Bag Fltraton Plus Bag wth PP mcro fbres For use wth Ol / grease Gel lke sludge Carbon purfcaton Carbon granules Effcent removal of organc mpurtes Optons Hose connecton Multple bag chambers for larger volumes Vton Buna / NBR Hgh-Pressure model Stanless Steel bag flter systems F7A-B1-PP Flter chambers F7-B1/B MX-7A-B1-PP F7Z-B1-PP Info 97/R1 July 1 F FIT (n tank) Medum Materal In Out Max. Flow 7A-B1 7A-B1 7L-B1 1 m³/h d/dn 7A-B 7A-B 7L-B m³/h B1/B PP 7Z-B1 7Z-B1 m³/h d/dn 7Z-B 7Z-B m³/h Bag L x OD (mm) Bag + PP mcro fbers 7-B1 = x 18 7-B = 8 x 18 7-B1 = 9 L (, kg) 7-B = 18 L (1, kg) Selecton: F - 7A - B1 - PP Bag + carbon granules 7-B1 = 9 L 7-B = 18 L standard maxmum pressure C F Mpa bar ps 8,, 11,, 8 17,, opton hgh pressure model C F Mpa bar ps 8,, 8 1,, ,,

39 F-71Z-K-T-PP opton Flter chambers wth threaded cover Typcal applcatons Platng, etchng, solar and process ndustry Compact and robust, servce frendly No metal parts, all PP constructon Threaded cover for fast and easy openng Welded bottom (no seal) Max. temperature PP 8 C Large choce of fltermeda Strng wound flter cartrdges (double or sngle open ended) Melt blown flter cartrdges Carbon cartrdge Pleated cartrdges Hgh flow pleated cartrdge Dscs wth flterpaper/cloth Flterbag opton F-71A-K-T-PP Standard Unon connecton for rgd ppng (PP or CPVC sockets) EPDM gasket 1" and " chambers Manometer Ar release PP cover maxmum pressure s, bar PP renforced cover (black) max s, bar Optons Hose connectons, flanges Vton gasket " chamber Customzed mountng plate n-tank or floor mountng ( PP legs mm) Safety swtch on threaded cover Contact manometer Flter chambers seres T wth threaded cover Info 1191/R Aprl 11 F FIT (n tank) Medum Materal In Out 71A/7A 71Z/7Z 71A/7A 71Z/7Z K/P d/dn PP 7A 7Z 7 7A 71Z/7Z B1/B/HF d/dn Selecton: F - 71Z - K - T - PP K = cartrdges Qty x L 71-K = 7 x 1" 7-K = 7 x " P = dscs Qty OD/ID m² 71A-P = x / 1, 7A-P = x /,1 B = Bag L x OD (mm) 7-B1 = x 18 7-B = 8 x 18 HF = hgh flow pleated cartrdge 7-HF =,1m² 7-HF =,7m² (opton) standard maxmum pressure C F Mpa bar ps 8,, 11,, 8 17,, opton hgh pressure model C F Mpa bar ps 8,, 8 1,, ,,

40 1. -. l/h Dscs, cartrdges, bag Typcal applcatons Platng and process ndustry Compact and robust, servce frendly Flter chamber wth welded bottom (no seal) Dscs (thn/thck paper, cloth), cartrdges (max. Ø 9mm) or pleated bag All PP constructon Top plate made of glass-flled PP Max. temperature PP 8 C External fasteners n SS1 Unons for rgd ppng (PP or CPVC sockets) Optons Hose connecton Contact manometer Sngle open end cartrdges Customsed mountng plate Four PP legs (standard mm) External fasteners n ttanum or electroless nckel coated F-11A-P-PP ft m 1 Pressure loss / flowrate 1 P K 1 l / h us-gph Flter chambers F11/1 PP F FIT (n tank) Medum Materal In Out 11/1 11A/1A 11Z/1Z 11A/1A 11Z/1Z 11L/1L K/P/D/PC PP d/dn Selecton: FIT - 11A - K - PP standard maxmum pressure C F Mpa bar ps 8,, 11,, 8 17,, opton hgh pressure model C F Mpa bar ps Info 9/R May 9 K = cartrdges Qty x L 11-K = 1 x 1" 1-K = 1 x " P = dscs Qty OD/ID m² 11-P = 7() x 8/,(1,9) 1-P = 9() x 8/,1(,8) D = pleated bag *) L m² 11-D = 1" 1, 1-D = ", PC = dscs + carbon bag 11-PC = 1 dscs + carbon bag (1L.) 1-PC = 7 dscs + carbon bag (L.) *) For flter chambers wth GAF-type flter bags, see separate leaflet 8,, 8 1,, ,,

41 . -. l/h Cartrdges Typcal applcatons Platng and process ndustry Compact and robust, servce frendly Flter chamber wth welded bottom (no seal) Cartrdges (max. Ø 7mm) All PP constructon Top plate made of glass-flled PP Max. temperature PP 8 C External fasteners n SS1 Unons for rgd ppng (PP or CPVC sockets) Optons Hose connecton Contact manometer Sngle open end cartrdges Customsed mountng plate Four PP legs (standard mm) External fasteners n ttanum or electroless nckel coated F-A-K-PP ft m 1 Pressure loss / flowrate 1 K l / h us-gph Flter chambers F1/ PP F Medum Materal In Out 1A/A K PP d7/dn Selecton: F - A - K - PP maxmum pressure C F Mpa bar ps 8,, 11,, 8 17,, Info 91/R May 9 K = cartrdges Qty x L 1A-K = x 1" A-K = x "

42 l/h Dscs, cartrdges, bags Typcal applcatons Platng and process ndustry Robust and servce frendly Flter chamber wth welded bottom (no seal) Thn dscs (large flter area) or thck dscs (large drt holdng capacty) Flter paper (thn/thck), cloth, cartrdges (max. Ø 7mm) or bags Dscs can be removed n manageable stacks All PP constructon, max. temperature 8 C Wheels for portablty External fasteners n SS1 Unons for rgd ppng (PP or CPVC sockets) Optons Hose connecton Contact manometer Sngle open end cartrdges Customsed mountng plate External fasteners n ttanum or electroless nckel coated F-A-P-PP Flter chambers F PP F Medum Materal In Out A K/P/B PP d7/dn Selecton: F - A - P - PP maxmum pressure C F Mpa bar ps 8,, 11,, 8 17,, Info 9/R May 9 K = cartrdges Qty x L A-K = x " P = dscs Qty OD/ID m² A-P = 1 x /1 9 A-Ph = x /1 B = bags Qty L/OD Z-B = 7 x /1

43 Cartrdges, Bag Typcal applcatons Platng and process ndustry *) Lght weght SS1 flter chamber Easy to use Vee clamp closure Max. temperature 11 C Max. pressure 1 bar EPDM O-rngs Optons Multple bag chambers Vton O-rngs F--ZB-SS F--HK-SS F-7-HB-SS *) The housngs are sutable for all lquds classfed as Group Ths flud group s as defned n the European Pressure Equpment Drectve 97//EC Flter chambers n SS1 Type Qty x L In / Out Dran Vent Bar Weght (kg) Medum F-1H-K-SS x 1" 11 F-H-K-SS x " 1 " ½" x ¼" 1 F-1H-K-SS x 1" 1 F-H-K-SS x " 18 Info 81/R March 11 Type OD x L (mm) In / Out Dran Vent Bar Weght (kg) Medum F-Z-B-SS " x 1½" NA ¼" 8, F-7H-B1-SS 7" x 1 " ½" (1x) ¼" 1 F-7H-B-SS 7" x 8 1

44 Standard flter housngs seres FIL Applcatons The Flter-In-Lne seres are made of a durable, renforced Polypropylene (PP) or Styrene Acrylontrle (PPC) or Stanless Steel (SS) and are compatble wth a varety of chemcals. A smart and economc soluton for a wde range of fltraton requrements. Easy to nstall, easy to use. Standard avalable for 1" and " flter cartrdges. Clear verson to vsually ensure your flter s operatng at ts optmal flow and capacty Blue verson s bult wth thck walls and rugged desgn for ncreased strength and durablty Leak-proof sealng wth top-seated O-rng PP NTP ¾ connecton: no lqud n contact wth metal DOE cartrdges of to 7 mm dameter Max. temperature PPC and PP C, SS1 1 C Max. pressure PPC and PP 8 bar, SS1 1 bar Materals Blue: both housng and head made out of Renforced PP, O-rng Buna-N Clear: Styrene Acrylontrle (SAN) housng, Renforced PP head, O-rng Buna-N SS: SS1L for both head and housng, O-rng EPDM Optons Pressure relef/bleed button Dran valve O-rng n vton GF Unon connecton Hose connecton Flter housngs seres FIL FIL-11-K-SS Info 171 /R1 June 1 Type Length Qmax l/h Inlet BSP Outlet BSP Dmensons L x Ø (mm) Volume (l) Weght (kg) Clear FIL-11-K-PPC 1" 1 /" /" 11 x 1, 1, FIL-1-K-PPC " /" /" 8 x 1,7, Blue FIL-11-K-PP 1" 1 /" /" 11 x 1, 1, FIL-1-K-PP " /" /" 8 x 1,7, SS FIL-11-K-SS 1" 1 1" 1" 7 x 1,, FIL-1-K-SS " 1" 1" x 1,7, FIL-1-K-SS " 1" 1" 8 x 1,1,

45 Qualty Flter Meda for Surface Treatment Selecton crtera for choosng the rght flter medum Type of lqud ph Temperature Tank volume Clean flter flow rate Flter area ( x area = x lfe) Mcron ratng Carbon purfcaton 1 Sources of contamnaton Products to be plated Anodes Envron dust Ar agtaton Drag n Flght bars Cathode contacts Addton of platng chemcals Organc breakdown products of brghteners Elements affectng fltraton cost Intal prce of flter housng Buyng prce of flter medum Lfetme of flter medum Labour cost perodc change/cleanng Dfferental Pressure (mbar) 1 1 water C 1µm µm µm 1µm µm Flter meda 1 1 Flow rate (l/mn) Strng wound cartrdge Types 1 Cartrdges Dscs Bags Mcro fbers - Strng wound - Spunbonded - Pleated - Carbon - Flter paper - Flter cloth - Carbon paper - GAF-style flter bag - Customzed flter bag - Carbon bag - SP (Spaghett) Absorbs non emulsfed ol out of emulsfed cleaners - AH (Angel har) For fltraton of Sn + Info 199/R1 February 1 Style - Nomnal or absolutely rated - Double or Sngle Open End - PP, Polyester - All mcron ratngs - True depth fltraton - Easy change - Large varety - All dameters - Thn or thck paper - Cellulose, PP/Polyester - Large flter surface - Low meda cost - Two szes (ø " and 7") - Sngle or double length - PP, Polyester felt - All mcron ratngs - Large drt holdng capacty - Easy bag change - Absorbs -8 tmes ts own weght - Large sludge holdng capacty - Can be reused

46 Cartrdges 1 Type Medum Length Box qty Core µm Endcap Code Code Code Code Code Code Wound W PP (washed) W 9¾" PP P, DOE - Polyester L 1" PES L " SS S " - Spunbonded S PP N 9¾" DOE - 1" - " - Pleated P PP A 9¾" PP P, - 1 DOE - (absolutely rated) 1" - 1 C C " 18 - Carbon Block C PP CB 1" PP P DOE - (1": carbon contents g) " 1 C C C = Sngle Open End wth double O-rng Selecton example: W - W P - " 1 - Dscs Paper, mm 9 g/m Cel, 1 µm Paper 1 mm 7 g/m Cel, 1- µm Carbon paper, mm 1 g/m Cel/Car, µm Pack Box Pack Box Pack Box pack qty 1 Sze Qty Qty cm kg Qty Qty cm kg Qty Qty cm kg mm g/m µm 1x 9 xx xx 19 xx x xx 9 8 xx 1 1 xx 1,7-19x xx 1 8 xx 1 1 xx 1 x xx 1 8 xx 19 xx 17 1x xx 11 1 xx 19 xx 18 1x xx 1 1 xx 1 xx 19 8x 1 xx 18 1 xx 1 xx 8x 1 xx xx 9 8 xx 8 9x 1 xx xx 1 8 xx 9 9x 1 xx xx xx 9 x 1 xx 8 xx xx 1 x1 1 xx 17 1 xx 1 xx 7 7x 1 xx xx 1 xx 8 Selecton example: 9x - 9 g/m Carbon contents -% Cloth PP Bags Bags wth flow nsde > outsde Bags wth flow outsde > nsde Carbon bags Type Mat L(mm) Ø µm B1 PP B PP B1 PP B PP Pack quantty for all bags = 1 Type Mat Sze m µm 1-D PP 1", - -D PP ",7-71-D PP 1",8-7-D PP " 1, - 11-D PP 1" 1, - 1-D PP ", - Type Mat Sze HxØ(mm) Lter µm 1-C PP 1" x17 1 -C PP " 7x C PP 1" x C PP " 7x 1 11-C PP 1" x C PP " 7x 1 Mcro fbers Type Mat Pack qty SP PP kg AH PP kg

47 PP Eductors Eductors use a unque ventur desgn whch enables smaller pumps to crculate large volumes of tanksoluton. Lqud s pumped nto the nozzle and exts at hgh velocty nducng tmes the lqud from the surroundng soluton. Typcal applcatons Platng Cleanng Phosphatng Anodzng Reduce energy costs Improve pump and flter performance Improve platng qualty Optons Eductors n PVDF and SS ➊ ➍ ➎ Tankmx eductors seres HE Type Input capacty n l/h at dfferent pressure n bar Dmensons,7 1 1,,, S L D bar bar bar bar bar bar bar bar mm mm L Info 7/R September 7 HE-1/" / 77 HE-/8" /8 11 HE-/" / 1 7 HE-1" HE-1½" ½ 11 D S

48 A centrfugal pump by ts prncple s not self prmng because of ts lmted ablty to transport ar. The Hendor prmng chamber overcomes ths problem and adds a self prmng feature to a standard horzontal pump. The prmng chamber s ntally flled wth soluton. Prmng tme wll depend on length/dameter of sucton ppe. After the ntal fllng of the chamber, next tme, the pump wll automatcally reprme. The maxmum pump flowrate wll be reduced by approx % compared to the publshed flow curve. The pressure/head wll not be affected. Two models Mounted on top of pump dscharge wth sucton lft of 1 meter and prmng tme max 1 mnute for Hendor pumps M1/11/1 and MX//9/1. Mounted on the floor wth sucton lft of meters and max prmng tme of mnutes for Hendor pumps MX1/1///1. Prmng Chambers PP/PVC Info 8/R1 Februar 1 Type Materal In (mm) Out (mm) d/dn d/dn Dmensons (mm) L W H Use wth Type Materal In (mm) Out (mm) d/dn d/dn Dmensons (mm) L W H Use wth PC-1 / / M1 PC-11 / / 7 MX1 PC-18 / / M11-M1 PC-1 / / 8 1 MX1 PC- PP/PVC / / MX-MX PC- / / 97 MX PC-7 / / MX9 PC- / / 971 MX PC- / / MX1 PC- / / 988 MX1 PP