Z-50-S Standing Spindle 50 kn

Size: px

Start display at page:

Download "Z-50-S Standing Spindle 50 kn"

Cora Goodwin
5 years ago
Views:

length SRO wth Tr 0x7 Wthout escape/ rotaton protecton Escape/rotaton protecton wthout lmt swtch set ESSET kn Escape/rotaton protecton wth lmt swtch set ESSET 62+stroke 92+stroke 1+stroke See Table

1 Z-50-S Standng Spndle 50 kn Safety Safety nut nut New: Spndle lubrcaton durng operaton Ths page Secton.29 Secton.27 M12/16 deep 52J7/ deep M10/15 deep SRO Length M12/16 deep Fttng heght Y Overall heght 30H9/16 deep M12/16 deep (2x) Breakthrough for protectve tube SRO square 102x102 or round Ø 130 Protectve tube length SRO wth Tr 0x7 Wthout escape/ rotaton protecton Escape/rotaton protecton wthout lmt swtch set ESSET kn Escape/rotaton protecton wth lmt swtch set ESSET 62+stroke 92+stroke 1+stroke See Table "Fttng heghts" below for bellows, see Secton 7 for spral sprngs Duty cycle, thermal lmt, for S+R 50 [kn] rpm 1800 rpm 1000 rpm thread Tr 0x7 500 rpm % ED/10 mn at 20 C Ths chart provdes approx. fgures under standard ndustral condtons (ambent temperature etc.) and regular mantenance (lubrcaton etc.). The maxmum nput torque for optmum servce lfe s shown on the rght (1500 rpm) and on page 2.15 : % ED 1.1 to 2.5 hgher Fttng heghts for 0-stroke, wth Tr 0x7 Bellows FB Standard end* Fxng flange BF Forked head GK* Rod end KGK* All dmensons n mm Wthout FB Z-35/50-FB-390 Z-35/50-FB-600 Z-35/50-FB-1000 Z-35/50-FB-1200 Z-35/50-FB / /26 193/ /309 26/30 301/359 11/ /28 177/ / / /33 231/ /38 313/ /29 366/2 21/79 221/ /37 303/ /19 356/1 11/69 * Wth bellows connectng rng Z-50-FBR Pvot bearng head SLK 203/ / / / /350 37/

2 Z-50-R Rotatng Spndle 50 kn Safety nut Ths page Secton.30 Secton.28 Effectve length Mnus nut=stroke M12/16 deep (2x) Fttng heght Y+stroke 52J7/3 deep M12 DIN 912 M10/15 deep 30H9/16 deep M12/16 deep (2x) 7 M12/16 deep (2x) Fttng heght Z-50-R- for 0-stroke wth Tr Flange nut FM DM wth Self-algnng nut PM Greaseless nut FFDM Y 256 mm 260 mm 323 mm 319 mm 275 mm For bellows or spral sprng extenson: See Sectons Standard ratos Verson Type Speed Standard Stroke per drve shaft rotaton 5) Techncal data seres Z-50-S / Z-50-R Max. compresson / tensle force, statc - 50 kn (5 t) Max. compresson / tensle force, dynamc - see dagram on the left page Nomnal speed rpm Max. drve shaft speed rpm Spndle dmenson, standard - Tr 0x7 Gear reducton - 7:1 (N) / 28:1 (L) Housng materal - GGG-50, protected aganst corroson Worm shaft - steel, case-hardened, ground, protected aganst corroson Weght of screw jack - 17 kg Weght of /m - 8 kg Gearbox lubrcaton - synth. ZIMM-Flud-Grease Spndle lubrcaton - synth. ZIMM-Grease-Paste Gearbox operatng temperature - max. 80 C, hgher on request Mass moment of nerta - N: 6.0 kg cm 2 - L: 2.53 kg cm 2 Input torque (at 1500 rpm) - max Nm (N), max. 10. Nm (L) Drve-through torque - max. 260 Nm Z-50-SN Z-50-SL Z-50-RN Z-50-RL Standng Rotatng Drve torque MG (Nm) - F (kn) x )5) + ML (N-) - F (kn) x )5) + ML (L-) Breakaway torque - drve torque MG x 1.5 Idlng torque ) ML (Nm) Tr 0x7 Tr 0x (N-) (L-) 7:1 28:1 7:1 28:1 Between gearbox and nut or nut and end of threads provde for a safety dstance of (mnmum) 10 mm! See Secton 2 for Checklsts. Important nformaton - For bellows or spral sprng extenson: See Sectons Tr 0x7 s standard, others avalable: 2-ptch, INOX (stanless steel), left-handed, stronger Tr 55x9 (only for R verson) 3) - Factor ncludes effcency, rato and 30% safety ) - Can be hgher when new 5) - For 7 mm ptch 63.10

tube SRO square 102x102 or round Ø 130 Protectve tube length SRO wth Tr 50x8 Wthout escape/ rotaton protecton Escape/rotaton protecton wthout lmt swtch set ESSET kn Escape/rotaton protecton wth lmt

3 Z-50/Tr50-S Standng Spndle 50 kn NEW SIZE! Ths page New: Spndle lubrcaton durng operaton 52J7/ deep Fttng heght Y Overall heght M10/15 deep 30H9/16 deep For Z-50/Tr50 use sde system components from Z-100 SRO Length Breakthrough for protectve tube SRO square 102x102 or round Ø 130 Protectve tube length SRO wth Tr 50x8 Wthout escape/ rotaton protecton Escape/rotaton protecton wthout lmt swtch set ESSET kn Escape/rotaton protecton wth lmt swtch set ESSET 62+stroke 92+stroke 1+stroke See Table "Fttng heghts" below for bellows, see Secton 7 for spral sprngs Duty cycle, thermal lmt, for S+R 50 [kn] rpm 1800 rpm 1000 rpm thread Tr 50x8 500 rpm % ED/10 mn at 20 C Ths chart provdes approx. fgures under standard ndustral condtons (ambent temperature etc.) and regular mantenance (lubrcaton etc.). The maxmum nput torque for optmum servce lfe s shown on the rght (1500 rpm) and on page 2.15 : % ED 1.1 to 2.5 hgher Fttng heghts for 0-stroke, wth Tr 50x8 Bellows FB Wthout FB Z-100-FB-285 Z-100-FB-600 Z-100-FB-1000 Z-100-FB-1500 Standard end* All dmensons n mm 115/ / / / /361 Fxng flange BF 165/ / / / /363 Forked head GK* 259/317 32/00 339/ /55 7/505 * Wth bellows connectng rng Z-100-FBR Rod end KGK* 257/315 30/ / /53 5/503 Pvot bearng head SLK 223/ / / / /

Z-35 + Z-50/Tr50 NEW SIZE! Z-35 + Z-50/Tr50 Increased Dameter Spndle for Long Strokes Increased dameter The dameter s crtcal to the specfcaton of the gearbox.

Z-35: Z-50/Tr50: Wth Tr 0x7 Wth Tr 50x8 Applcaton example: Elevaton axs of a solar tracker Standard ratos Verson Type Speed Standard Stroke per drve shaft rotaton 5) Techncal data seres Z-50/Tr50 Max.

4 Z-35 + Z-50/Tr50 NEW SIZE! Z-35 + Z-50/Tr50 Increased Dameter Spndle for Long Strokes Increased dameter The dameter s crtcal to the specfcaton of the gearbox. The Z-35 and the Z-50/Tr50 have been specally desgned wth larger dameters - for applcatons wth long strokes (bucklng). Ths means a more compact gearbox can be used despte the large stroke length. Z-35: Z-50/Tr50: Wth Tr 0x7 Wth Tr 50x8 Applcaton example: Elevaton axs of a solar tracker Standard ratos Verson Type Speed Standard Stroke per drve shaft rotaton 5) Techncal data seres Z-50/Tr50 Max. compresson / tensle force, statc - 50 kn (5 t) Max. compresson / tensle force, dynamc - see dagram on the left page Nomnal speed rpm Max. drve shaft speed rpm Spndle dmenson, standard - Tr 50x8 Gear reducton - 7:1 (N) / 28:1 (L) Housng materal - GGG-50, protected aganst corroson Worm shaft - steel, case-hardened, ground, protected aganst corroson Weght of screw jack - 17 kg Weght of /m - 13 kg Gearbox lubrcaton - synth. ZIMM-Flud-Grease Spndle lubrcaton - synth. ZIMM-Grease-Paste Gearbox operatng temperature - max. 80 C, hgher on request Mass moment of nerta - N: 6.65 kg cm 2 - L: 2.62 kg cm 2 Input torque (at 1500 rpm) - max Nm (N), max. 10. Nm (L) Drve-through torque - max. 260 Nm Z-50/Tr50-SN Z-50/Tr50-SL Standng Drve torque MG (Nm) - F (kn) x )5) + ML (N-) - F (kn) x )5) + ML (L-) Breakaway torque - drve torque MG x 1.5 Idlng torque ) ML (Nm) Tr 50x (N-) (L-) 7:1 28:1 Between gearbox and nut or nut and end of threads provde for a safety dstance of (mnmum) 10 mm! See Secton 2 for Checklsts mm mm Important nformaton - For bellows or spral sprng extenson: See Sectons Tr 50x8 s standard, others avalable: 2-ptch, INOX (stanless steel), left-handed 3) - Factor ncludes effcency, rato and 30% safety ) - Can be hgher when new 5) - For 8 mm ptch 65.12

Z-100-S Standng Spndle 100 kn Safety Safety nut nut Ths page Secton.29 Secton.

102x102 or round Ø 130 Protectve tube length SRO wth Tr 55x9 Wthout escape/ rotaton protecton Escape/rotaton protecton wthout lmt swtch set ESSET kn Escape/rotaton protecton wth lmt swtch set ESSET

30 0 50 60 70 80 90 100 thread Tr 55x9 % ED/10 mn at 20 C Ths chart provdes approx. fgures under standard ndustral condtons (ambent temperature etc.)

5 Z-100-S Standng Spndle 100 kn Safety Safety nut nut Ths page Secton.29 Secton.27 New: Spndle lubrcaton durng operaton M6/20 deep 62J7/5 deep M12/25 deep Fttng heght Y Overall heght 0H9/25 deep SRO Length M6/20 deep 3 M16/20 deep (2x) Breakthrough for protectve tube SRO square 102x102 or round Ø 130 Protectve tube length SRO wth Tr 55x9 Wthout escape/ rotaton protecton Escape/rotaton protecton wthout lmt swtch set ESSET kn Escape/rotaton protecton wth lmt swtch set ESSET 82+stroke 112+stroke 1+stroke See Table "Fttng heghts" below for bellows, see Secton 7 for spral sprngs Duty cycle, thermal lmt, for S+R 100 [kn] rpm 1500 rpm 1800 rpm 500 rpm thread Tr 55x9 % ED/10 mn at 20 C Ths chart provdes approx. fgures under standard ndustral condtons (ambent temperature etc.) and regular mantenance (lubrcaton etc.). The maxmum nput torque for optmum servce lfe s shown on the rght (1500 rpm) and on page 2.15 : % ED 1.1 to 2.5 hgher Fttng heghts for 0-stroke, wth Tr 55x9 Bellows FB Wthout FB Z-100-FB-285 Z-100-FB-600 Z-100-FB-1000 Z-100-FB-1500 Standard end* All dmensons n mm 158/ / / / /16 Fxng flange BF 208/ / / / /18 Forked head GK* 302/ /55 372/52 30/510 80/560 * Wth bellows connectng rng Z-100-FBR Rod end KGK* 300/ /53 370/50 28/508 78/558 Pvot bearng head SLK 266/36 291/ /368 36/26 396/

DM wth Self-algnng nut PM Y 370 mm 53 mm 70 mm For bellows or spral sprng extenson: See Sectons 2 + 7 Standard ratos Verson Type Speed Standard Stroke per drve shaft rotaton 5) Techncal data seres

6 Z-100-R Rotatng Spndle 100 kn Safety nut Ths page Secton.30 Secton.28 Effectve length Mnus nut=stroke M16/20 deep (2x) Fttng heght Y+stroke 62J7/5 deep M12/25 deep 0H9/25 deep M16 DIN 912 M16/20 deep (2x) 8 3 M12/16 deep (2x) Fttng heght Z-100-R- for 0-stroke wth Tr DM wth Self-algnng nut PM Y 370 mm 53 mm 70 mm For bellows or spral sprng extenson: See Sectons Standard ratos Verson Type Speed Standard Stroke per drve shaft rotaton 5) Techncal data seres Z-100-S / Z-100-R Max. compresson / tensle force, statc kn (10 t) Max. compresson / tensle force, dynamc - see dagram on the left page Nomnal speed rpm Max. drve shaft speed rpm Spndle dmenson, standard - Tr 55x9 Gear reducton - 9:1 (N) / 36:1 (L) Housng materal - GGG-50, protected aganst corroson Worm shaft - steel, case-hardened, ground, protected aganst corroson Weght of screw jack - 29 kg Weght of /m kg Gearbox lubrcaton - synth. ZIMM-Flud-Grease Spndle lubrcaton - synth. ZIMM-Grease-Paste Gearbox operatng temperature - max. 80 C, hgher on request Mass moment of nerta - N: kg cm 2 - L:.75 kg cm 2 Input torque (at 1500 rpm) - max. 53. Nm (N), max Nm (L) Drve-through torque - max. 50 Nm Z-100-SN Z-100-SL Z-100-RN Z-100-RL Standng Rotatng Drve torque MG (Nm) - F (kn) x )5) + ML (N-) - F (kn) x )5) + ML (L-) Breakaway torque - drve torque MG x 1.5 Idlng torque ) ML (Nm) Tr 55x9 Tr 55x (N-) (L-) 9:1 36:1 9:1 36:1 Between gearbox and nut or nut and end of threads provde for a safety dstance of (mnmum) 20 mm! See Secton 2 for Checklsts. Important nformaton - For bellows or spral sprng extenson: See Sectons Tr 55x9 s standard, others avalable: 2-ptch, INOX (stanless steel), left-handed, stronger Tr 60x9 (only for R verson) 3) - Factor ncludes effcency, rato and 30% safety ) - Can be hgher when new 5) - For 9 mm ptch 67.1

Z-150-S Standng Spndle 150 kn Safety Safety nut nut Ths page Secton.29 Secton.

length SRO wth Tr 60x9 Wthout escape/ rotaton protecton Escape/rotaton protecton wthout lmt swtch set ESSET kn Escape/rotaton protecton wth lmt swtch set ESSET 87+stroke 117+stroke 19+stroke See

Tr 60x9 % ED/10 mn at 20 C Ths chart provdes approx. fgures under standard ndustral condtons (ambent temperature etc.)

7 Z-150-S Standng Spndle 150 kn Safety Safety nut nut Ths page Secton.29 Secton.27 New: Spndle lubrcaton durng operaton 62J7/ deep M12/30 deep 50H9/25 deep Fttng heght Y Overall heght SRO Length Breakthrough for protectve tube SRO square 135x135 or round Ø 175 Protectve tube length SRO wth Tr 60x9 Wthout escape/ rotaton protecton Escape/rotaton protecton wthout lmt swtch set ESSET kn Escape/rotaton protecton wth lmt swtch set ESSET 87+stroke 117+stroke 19+stroke See Table "Fttng heghts" below for bellows, see Secton 7 for spral sprngs Duty cycle, thermal lmt, for S+R 150 [kn] rpm 1500 rpm 1800 rpm 500 rpm thread Tr 60x9 % ED/10 mn at 20 C Ths chart provdes approx. fgures under standard ndustral condtons (ambent temperature etc.) and regular mantenance (lubrcaton etc.). The maxmum nput torque for optmum servce lfe s shown on the rght (1500 rpm) and on page 2.15 : % ED 1.1 to 2.5 hgher Fttng heghts for 0-stroke, wth Tr 60x9 Bellows FB Wthout FB Z-150-FB-300 Z-150-FB-600 Z-150-FB-1000 Z-150-FB-1500 Standard end* All dmensons n mm 15/ / / / /20 Fxng flange BF 195/ /315 25/ / /5 Forked head GK* 313/05 366/58 388/80 6/538 96/588 * Wth bellows connectng rng Z-150-FBR Rod end KGK* 305/ /50 380/72 38/530 88/580 Pvot bearng head SLK 300/ /20 350/2 08/500 58/

8 Z-150-R Rotatng Spndle 150 kn Safety nut Ths page Secton.30 Secton.28 Effectve length Mnus nut=stroke Fttng heght Y+stroke 62J7/ deep M12/30 deep 50H9/25 deep M20 DIN 912 Fttng heght Z-150-R- for 0-stroke wth Tr Flange nut FM DM wth Self-algnng nut PM Y 07 mm 32 mm 528 mm 527 mm For bellows or spral sprng extenson: See Sectons Standard ratos Verson Type Speed Standard Stroke per drve shaft rotaton 5) Techncal data seres Z-150-S / Z-150-R Max. compresson / tensle force, statc kn (15 t) Max. compresson / tensle force, dynamc - see dagram on the left page Nomnal speed rpm Max. drve shaft speed rpm Spndle dmenson, standard - Tr 60x9 Gear reducton - 9:1 (N) / 36:1 (L) Housng materal - GGG-50, protected aganst corroson Worm shaft - steel, case-hardened, ground, protected aganst corroson Weght of screw jack - 2 kg Weght of /m - 19 kg Gearbox lubrcaton - synth. ZIMM-Flud-Grease Spndle lubrcaton - synth. ZIMM-Grease-Paste Gearbox operatng temperature - max. 80 C, hgher on request Mass moment of nerta - N: 22.7 kg cm 2 - L: 7.96 kg cm 2 Input torque (at 1500 rpm) - max Nm (N), max Nm (L) Drve-through torque - max. 50 Nm Z-150-SN Z-150-SL Z-150-RN Z-150-RL Standng Rotatng Drve torque MG (Nm) - F (kn) x )5) + ML (N-) - F (kn) x )5) + ML (L-) Breakaway torque - drve torque MG x 1.5 Idlng torque ) ML (Nm) Tr 60x9 Tr 60x (N-) (L-) 9:1 36:1 9:1 36:1 Between gearbox and nut or nut and end of threads provde for a safety dstance of (mnmum) 20 mm! See Secton 2 for Checklsts. Important nformaton - For bellows or spral sprng extenson: See Sectons Tr 60x9 s standard, others avalable: 2-ptch, INOX (stanless steel), left-handed, stronger Tr 80x16 (only for R verson) 3) - Factor ncludes effcency, rato and 30% safety ) - Can be hgher when new 5) - For 9 mm ptch 69.16

Z-250-S Standng Spndle 250 kn Safety Safety nut nut Ths page Secton.

swtch set ESSET Escape protecton wth lmt swtch set ESSET 87+stroke 117+stroke 133+stroke See Table "Fttng heghts" below for bellows, see Secton 7 for spral sprngs Duty cycle, thermal lmt, for S+R 250

fgures under standard ndustral condtons (ambent temperature etc.) and regular mantenance (lubrcaton etc.). The maxmum nput torque for optmum servce lfe s shown on the rght (1500 rpm) and on page 2.

9 Z-250-S Standng Spndle 250 kn Safety Safety nut nut Ths page Secton.29 Spndle Sde E Spndle Sde F 2 72J7/ deep M16/30 deep SRO Length Fttng heght Y Overall heght 60H9/30 deep kn Protectve tube length SRO wth Tr 80x16 Wthout escape protecton Escape protecton wthout lmt swtch set ESSET Escape protecton wth lmt swtch set ESSET 87+stroke 117+stroke 133+stroke See Table "Fttng heghts" below for bellows, see Secton 7 for spral sprngs Duty cycle, thermal lmt, for S+R 250 [kn] rpm 1500 rpm 1800 rpm 500 rpm thread Tr 80x16 % ED/10 mn at 20 C Ths chart provdes approx. fgures under standard ndustral condtons (ambent temperature etc.) and regular mantenance (lubrcaton etc.). The maxmum nput torque for optmum servce lfe s shown on the rght (1500 rpm) and on page 2.15 : % ED 1.1 to 2.5 hgher Fttng heghts for 0-stroke, wth Tr 80x16 Bellows FB Wthout FB Z-250-FB-390 Z-250-FB-600 Z-250-FB-1000 Z-250-FB-1500 Standard end* All dmensons n mm Fxng flange BF Forked head GK* Rod end KGK* 18/250 21/33 223/ / /33 208/ / / /18 366/ /50 1/53 23/525 81/ /633 * Wth bellows connectng rng Z-250-FBR Pvot bearng head SLK 328/30 396/98 378/80 36/538 86/

Z-250-R Rotatng Spndle 250 kn Safety nut Spndle Sde E Ths page Secton.30 Secton.

0-stroke wth Tr DM wth Y 90 mm 600 mm DM wth Z 297 mm 07 mm For bellows or spral sprng extenson: See Sectons 2 + 7 Standard ratos Verson Type Speed Standard Stroke per drve shaft rotaton 5) Techncal

drve shaft speed - 1800 rpm Spndle dmenson, standard - Tr 80x16 Gear reducton - 10.

10 Z-250-R Rotatng Spndle 250 kn Safety nut Spndle Sde E Ths page Secton.30 Secton.28 Spndle Sde F M2 DIN 912 Effectve length Mnus nut=stroke Fttng heght Y+stroke 72J7/ deep 60H9/30 deep M16/30 deep Fttng heght Z+stroke Effectve length Mnus nut=stroke 5 Fttng heght Z-250-R- for 0-stroke wth Tr DM wth Y 90 mm 600 mm DM wth Z 297 mm 07 mm For bellows or spral sprng extenson: See Sectons Standard ratos Verson Type Speed Standard Stroke per drve shaft rotaton 5) Techncal data seres Z-250-S / Z-250-R Max. compresson / tensle force, statc kn (25 t) Max. compresson / tensle force, dynamc - see dagram on the left page Nomnal speed rpm Max. drve shaft speed rpm Spndle dmenson, standard - Tr 80x16 Gear reducton :1 (N) / 32:1 (L) Housng materal - GGG-50, protected aganst corroson Worm shaft - steel, case-hardened, ground, protected aganst corroson Weght of screw jack - 59 kg Weght of /m - 32 kg Gearbox lubrcaton - synth. ZIMM-Flud-Grease Spndle lubrcaton - synth. ZIMM-Grease-Paste Gearbox operatng temperature - max. 80 C, hgher on request Mass moment of nerta - N: 53.8 kg cm 2 - L: 22.0 kg cm 2 Input torque (at 1500 rpm) - max. 152 Nm (N), max. 1. Nm (L) Drve-through torque - max. 770 Nm Z-250-SN Z-250-SL Z-250-RN Z-250-RL Standng Rotatng Tr 80x16 Tr 80x :1 32: :1 32:1 Drve torque MG (Nm) - F (kn) x 0.9 3)5) + ML (N-) - F (kn) x )5) + ML (L-) Breakaway torque - drve torque MG x 1.5 Idlng torque ) ML (Nm) (N-) (L-) Between gearbox and nut or nut and end of threads provde for a safety dstance of (mnmum) 20 mm! See Secton 2 for the Checklst. 1.5 mm 0.5 mm 1.5 mm 0.5 mm Important nformaton - For bellows or spral sprng extenson: See Sectons Tr 80x16 s standard, others avalable: 2-ptch, INOX (stanless steel), left-handed, stronger Tr 100x16 (only for R verson) 3) - Factor ncludes effcency, rato and 30% safety ) - Can be hgher when new 5) - For 16 mm ptch 71.18

11 Your partner n qualty engneerng products snce 1986 Thank you for vewng product nformaton on TEA s range of engneerng components. Now please contact us at the nearest offce to you for any further nformaton, prces and avalablty: AUSTRALIA & New Zealand USA, South Amerca & Canada T.E.A. Transmssons Pty Ltd T.E.A. Machne Components Inc. Taht Road 2281-F Dabney Road Taro Qld 650 Rchmond Vrgna Australa USA Ph: 61-(0) Ph: Fax: 61-(0) Fax: Emal: sales@tea.net.au Emal: sales@teausa.net You are assured of prompt and effcent servce at all tme.

Product Information. Universal swivel vane RM-W

Product Information. Universal swivel vane RM-W Product Informaton RM-W RM-W Modular. Compact. Flexble. RM-W swvel vane wth hgh torque for fast swvelng tasks Feld of applcaton To be used n clean to slghtly drty envronments such as assembly or packagng