Series K Helical Bevel
|
|
- Luke Campbell
- 6 years ago
- Views:
Transcription
1 Seres K Helcal Bevel Techncal Up to- 160 kw / 50,000 Geared otor CK-3.02-GB-0318
2 PRODUCTS IN THE RANGE Seres A Worm Gear unts and geared motors n sngle & double reducton types Seres BD Screwjack worm gear unt Seres BS Worm gear unt Seres C Rght angle drve helcal worm geared motors & reducers Seres F Parallel shaft helcal geared motors & reducers Seres G Helcal parallel shaft & bevel helcal rght angle drve gear unts Seres H Large helcal parallel shaft & bevel helcal rght angle drve unts Seres J Shaft mounted helcal speed reducers Seres K Rght angle helcal bevel helcal geared motors & reducers Seres In-lne helcal geared motors & reducers Rolod Gear Pump Lubrcaton and flud transportaton pump Seres P Planetary Foot and flange mounted planetary unts Seres X Elgn Gear Torsonally rgd, hgh torque couplng Seres X Elflex Pn and bush elastomer couplng Seres X Nylcon Gear couplng wth nylon sleeve otors Full range of IEC motors We offer a wde range of repar servces and many years experence of reparng demandng and hghly crtcal transmssons n numerous ndustres. We can create custom engneered transmsson solutons of any sze and confguraton.
3 CONTENTS PAGE General Descrpton Unt Desgnaton Explanaton And Use Of Ratngs And Servce s Classfcaton By Applcatons Selecton Procedure For otorsed Unts Optons otor Adapters Lubrcaton ountng Postons Unt Handngs OTORISED otor Performance otor Detals Addtonal otor Features Addtonal Gearbox Features Exact Ratos Selecton Tables- Geared otors Dmenson Table- Geared otors otorsed Backstop odule REDUCER & Axal s on Shafts Thermal Power Ratngs Ratngs - Input Power / Dmenson Sheets - Reducer Fan Cooled Unts Reducer Backstop odule OUTPUT OPTIONS Dmensons Of shaft Optons Dmensons Sheet - Arm & Flange Dmensons Of B14 (C) Flange Unts Dmensons Sheet- Assmembly / Dsassmbly Shppng Specfcatons Safety Informaton
4 CONTENTS PAGE General Descrpton Unt Desgnaton Explanaton And Use Of Ratngs And Servce s Classfcaton By Applcatons Selecton Procedure For otorsed Unts Optons otor Adapters Lubrcaton ountng Postons Unt Handngs OTORISED otor Performance otor Detals Addtonal otor Features Addtonal Gearbox Features Exact Ratos Selecton Tables- Geared otors Dmenson Table- Geared otors otorsed Backstop odule REDUCER & Axal s on Shafts Thermal Power Ratngs Ratngs - Input Power / Dmenson Sheets - Reducer Fan Cooled Unts Reducer Backstop odule OUTPUT OPTIONS Dmensons Of shaft Optons Dmensons Sheet - Arm & Flange Dmensons Of B14 (C) Flange Unts Dmensons Sheet- Assmembly / Dsassmbly Shppng Specfcatons Safety Informaton
5 GENERAL DESCRIPTION Seres K Seres K rght angle drve helcal bevel helcal geared motors offer ratos from 8 : 1 to 160 : 1 n three stages or up to 10,000 : 1 n fve stages. otors are avalable up to 160kW and output torque capacty up to The Seres K geared motor s desgned wth ntegral cast feet for or end mountng and can be offered wth sngle or double extended output shafts. Unts are also avalable shaft mounted or wth output flanges and are avalable for mountng horzontally or vertcally. The unts can also be offered wth a bolt on torque reacton bracket and all varants are avalable ether motorsed or wth an nput shaft assembly. Addng to the range of geared motors ths product takes advantage of our many years of accumulated desgn expertse together wth the use of hgh qualty materals and components. The end result s a seres of speed reducng geared motors offerng hgh load carryng capactes, ncreased effcency, quet runnng and relablty. * otorsed Trple reducton Standard unt wth feet K B C - 1 B 7. 5 A - - Reducer Quntuple reducton Standard unt wth feet The Range Includes: 12 s of Unts: K03, K04, K05, K06, K07, K08, K09, K10, K12, K15, K16, K18 Verson B Verson F or H Verson T or Q - standard unt wth feet - standard unt wth output flange - standard unt wth torque bracket * K C B R C Reducer Trple reducton Standard unt wth output flange on left Unt Types: Unt type - otorsed wth IEC standard motor Unt type N - otorsed wth NEA standard motor Unt type H - otorsed wth hgh effcency motor (IE3) Unt type E - otorsed wth NEA hgh effcency motor (PREIU) Unt type G - Unt to allow fttng of IEC motor Unt type A - Unt to allow fttng of NEA motor Unt type R - Reducer unt Unt type S - Reducer unt wth fan kt Unt type W - Reducer unt wth backstop CCW rotaton Unt type X - Reducer unt wth backstop CW rotaton Unt type Y - Reducer unt wth fan and backstop CW rotaton Unt type Z - Reducer unt wth fan and backstop CCW rotaton Desgn Features Include: Patented standard motor connecton (IEC or NEA) Ablty to ft double ol seals, on output shaft or reducer nput shaft as requred. All unts are dmensonally nterchangeable wth other major European manufacturers Braked geared motors are avalable as standard Unts are manufactured and assembled from a famly of modular kts for dstrbutor frendlness mnmsng nventory and maxmsng avalablty otorsed unts can be ftted wth a backstop module and reducer unts can be ftted wth a backstop and fan. As mprovements n desgn are beng made contnually ths specfcaton s not to be regarded as bndng n detal and drawngs and capactes are subject to alteraton wthout notce. Certfed drawngs wll be sent on request. * * * K F R H otorsed Quntuple reducton Standard unt wth feet K C B C - 1 B. 2 5 A - - Reducer Trple reducton Standard unt wth feet K B R C Reducer Trple reducton Standard unt wth torque bracket * K T R H * Typcal unt desgnatons
6 UNIT DESIGNATIONS Gearbox Codes otor Codes * Example 1 - Seres K Range K 2, 3 - of Unt Seres of Unt No of Reductons Revson Verson Nomnal Overall Rato Unt Verson Type of Unt Shaft otor Adaptor ountng Poston Geared otor Power No of otor Poles Addtonal otor Features Addtonal Gearbox Features K B C G 1 D 4. 0 A - - ** Lookng on Inputshaft ountng Poston 1 (See unt handngs page) *** Non Standard and Handng Applcaton Engneerng 20 - Addtonal Gearbox Features Double Ol Seal, otorzed Backstop etc e.g. - F 19 - Addtonal otor Features e.g. - A For Types Wthout otor Enter No of Reductons Revson Verson 2 6, 7, 8 - Nomnal Overall Rato e.g No of otor Poles - No motor 50 Hz 60 Hz 4 Pole (Std) 1500 A Pole (Hgh)1500 K Pole (Std) 1000 C Pole (Hgh) Pole 3000 E Pole 750 G 900 B L D N F H 9 - Unt Verson Standard Unt wth Feet B S Dual speed or specal motor 15, 16, 17 - Geared otor Powers STD Unt wth Flange STD Unt wth Bracket F T on Left ** H on Left ** Q 10 - Type of Unt - otorzed wth IEC standard motor (IE2) on Rght** on Rght** otor HP requred (For 50 Hz enter kw) e.g For reducer and non standard motor types enter N H E G A R S W X Y Z - otorzed wth NEA standard motor - otorzed wth IEC hgh effcency motor (IE3) - otorzed wth NEA hgh effcency motor (PREIU) - Unt to allow fttng of IEC motor (customer own motor) - Unt to allow fttng of NEA motor (customer own motor) - Reducer unt - Reducer unt wth fan kt - Reducer unt wth backstop CCW rotaton - Reducer unt wth backstop CW rotaton - Reducer unt wth fan and backstop CW rotaton - Reducer unt wth fan and backstop CCW rotaton 13, 14 - ountng Poston e.g OUTPUT SHAFT 2 B 12 - otor Adaptor For Unt Types Column 10 Entres, N, H, E, G or A See Pages 9 and 10 For All Other Types Enter Standard Sngle Extenson Standard Double Extenson Standard Hollow Shaft Standard Shrnk dsc C D H X on Left * on Left ** E Y on Rght ** on Rght *** - * Ths Page ay Be Photocoped Allowng The Customer To Enter Ther Order 2
7 Gear unt selecton s made by comparng actual loads wth catalogue ratngs. Catalogue ratngs are d on a standard set of loadng condtons, whereas actual load condtons vary accordng to type of applcaton. Servce s are therefore used to calculate an equvalent load to compare wth catalogue ratngs..e. Equvalent = Actual x Servce echancal Ratngs and Servce s Fm and Fs echancal ratngs measure capacty n terms of lfe and/or strength, assumng 10 hr/day contnuous runnng under unform load condtons. Catalogue ratngs allow 100% overload at startng, brakng or momentarly durng operaton up to 10 hours per day. The unt selected must therefore have a catalogue ratng at least equal to half maxmum overload. echancal Servce Fm (Table 1) s used to modfy the actual load accordng to daly operatng tme, and type of loadng. characterstcs for a wde range of applcatons are detaled n Table 3 opposte, whch are used n decdng the approprate Servce Fm from Table 1. If overloads can be calculated, or accurately assessed, actual loads should be used nstead of Fm. For unts subjected to frequent stop/starts overloads n excess of 10 tmes/day multply factor Fm x Fs (table 2). For applcatons where unts are to operate n extremely dusty or most/humd atmospheres unt selecton should be referred to applcaton engneerng. Table 1. echancal Servce (Fm) EXPLANATION & USE OF RATINGS & SERVICE FACTORS Prme over Electrc otor, Steam Turbne or Hydraulc otor Duraton of Servce Hours per day < > 10 Unform mass acceleraton factor < Classfcaton-Drven achne oderate mass acceleraton factor < Heavy mass acceleraton factor < ult-cylnder Internal Combuston Engne < > Sngle-cylnder Internal Combuston Engne < > ass acceleraton factor = all external moments of nerta * moment of nerta of drvng motor * calculated wth reference to the motor speed Table 2. Number of Starts (Fs) Start / Stops per hour (1) < > 200 Fs Note: Intermedate values are obtaned by lnear nterpolaton 3
8 LOAD CLASSIFICATION BY APPLICATIONS Classfcatons - U =Unform =oderate Shock H =Heavy Shock =Consult our Engneers Agtators Pure lquds Lquds and solds Lquds varable densty Blowers Centrfugal Lobe Vane Brewng & dstllng Bottlng machnery Brew Kettles Cookers ash tubs Scale hopper Can fllng machnery Crane knfe Car dumper Car puller Clarfer Classfer Clay wokrng machnery Brck press Brquette machne Clay workng machnery Plug mll Compressors Centrfugal Lobe Recprocatng ult cylnder Sngle cylnder Conveyors- Lght duty unform load Apron Assembly Belt Bucket Chan Flght Oven Screw Conveyors - Heavy duty unform load Apron Assembly Belt Bucket Chan Flght Lve roll Oven Recprocatng Screw Shaker Cranes Crusher Ore Stone Sugar Dredger Cable reals Conveyors Cutter head drve Pumps Screen drve Stackers Wnches U U U U H H U H U U U U U U U U H H H H H Elevators Bucket - Unform load Bucket - Heavy load Bucket - Contnuous Centrfugal dscharge Escalators Freght Gravty dscharge Passenger lfts Fans Centrfugal Coolng towers Induced draft Forced draft Fan - Large dameter nduced draft Fan - Lght, small dameter Feeders Apron Belt Dsc Recprocatng Screw Food ndustry Cereal cooker Dough mxer eat grnder eat slcer Generators - not weldng Hammer mlls Hosts Heavy duty edum duty Skp host Laundry Tumbler Washer Lne shafts Heavy duty Lght duty Lumber ndustry Barkers Burner conveyor Chan/ Drag saw Chan transfer Chan way transfer De- barkng drum Edger feed Gang feed Green chan Lve roll Log deck Log haul Log turnng Log converyor Of bearng roll Planer feed chanes Planer host Re-saw conveyor Roll cases Slab conveyor Sortng table - trple host Trple host - Drve /conveyor Transfer converor Transfer roll Tray drve Trmmer feed Waster conveyor Small waste conveyor (belt) Small waste conveyor (chan) U UU U U U H U U H H U H H H H H H H H H H H H U U U achne Tools Bendng roll Punch press Notchng press Plate planer Other machne tools an drve Aux drve etal mlls Carrage/man drve Draw bench Dryer Flattenng machnery Pnch drve Reversng sltters Scrubber rolls Table conveyors Group drves Indvdual drves Table conveyors- reversng Wre draw Wre roll lls Cement kln Dryer, Cooler Kln (other) Rod plan Rod wedge bar Rotary/ Ball Tumblng barrel xers Concrete Cons densty Varable densty Ol ndustry Chller s Ol well pump Flter press Rotary kln Paper ndustry Agtator (mxer) Barker (hydraulc) Barker (mechancal) Barkng drum Beater & Pulper Bleacher Calednders Calenders- super Convertng machne Conveyors Couch Cutters - plates Cylnders Dryers Felt stretcher Felt whpper Jordans Log haul achne real Presses Stock chest Sucton roll Washers & thckeners Wnders Prntng presses Pullers Barge haul HH H U H H H H H H H H H H U H H U H U H H H H Pumps Centrfugal proportonng Proportonng Recprocatng Sngle actng 3+ cylnders Double actng 2+ cylnders Sngle actng 1 & 2 cylnders Double actng 1 cylnder Rotary- gear type Rotary- lobe type/ vane Sand muller Sewage treatment Bar screen Chemcal feeder Collector Dewaterng screw xers Scum breaker Thckness Vacuum flters Screens Ar washng Rotary, stone or gravel Travelng water ntake Slab pushers Slewng Steerng gear Stokers Sugar ndustry Can knfe Crusher lls Textle ndustry Batchers Calenders Cards Dry cans Dryers Dyeng machnery Knttng machnery Looms angles Nappers Pads Range drve Slashers Soapers Spnners Tenter frame Washers Wnders Wndlass U U U U U U U U H U 4
9 SELECTION PROCEDURE FOR OTORISED UNITS EXAPLE APPLICATION DETAILS Absorbed power of drven machne = 13kW speed of gearbox or Input speed of machne = 45 rev/mn Applcaton = Unformly loaded belt conveyor Duraton of servce (hours per day) = 24hrs ountng poston = 1 Ambent temperature = 20 o C Runnng tme (%) = 100% 1 DETERINE ECHANICAL SERVICE FACTOR (Fm) Refer to Classfcaton by Applcaton, table 3. Applcaton = Unformly loaded belt conveyor Conveyors-unformly loaded or fed apron U U = Unform load assembly U belt U bucket U chan U Refer to mechancal servce factor (Fm), table 1, page 3 Duraton of servce (hours per day) = 24hrs Prme mover Electrc motor, steam turbne or hydraulc motor Duraton of servcehrs per day classfcaton-drve oderate Unform Shock < > DETERINE REQUIRED OUTPUT TORQUE AT GEARBOX OUTPUTSHAFT Absorbed = Absorbed power x 9550 output torque Gearbox output speed 13 x 9550 = Therefore mechancal servce factor (Fm) = SELECT GEARED OTOR Refer to selecton table one motor sze larger than absorbed power. Absorbed power = 13kW, therefore refer to 15kW selecton table. Always select from 4 POLE selecton table n the frst nstance as ths offers a more economcal soluton. Requred output speed of gearbox = 45 rev/mn 15.0kW 4 POLE R/IN Rato 2 Fm N Unt Desgnaton Column Entry 1 Through 20 Spaces to be flled when enterng order Servce Weght of mount unt K A L K A L K A L K A L K A L K A L K A L otor Go to pont 4 5
10 SELECTION PROCEDURE FOR OTORISED UNITS 4 CHECK OUTPUT TORQUE torque (2) of selected unt must be equal or more than requred output torque at gearbox outputshaft. Requred output torque at gearbox outputshaft = kW 4 POLE R/IN Rato 2 Fm N Unt Desgnaton Servce Column Entry 1 Through 20 Spaces to be flled when enterng order Weght of mount unt K A L K A L K A L K A L K A L K A L K A L otor Selected unt's output torque (2) = 2995, therefore unt s acceptable 5 CHECK SERVICE FACTOR Servce factor (Fm) of selected unt must be equal or more than requred servce factor. Requred servce factor of gearbox = kW 4 POLE R/IN Rato 2 Fm Servce N Unt Desgnaton Column Entry 1 Through 20 Spaces to be flled when enterng order Weght of mount unt otor K A L K A L K A-- K A L K A L K A L K A L K A L Selected unt's servce factor (Fm) = 1.26, therefore unt s acceptable. 6 CHECK OVERHUNG LOADS If sprocket, gear, etc s mounted on the outputshaft then refer to s Procedure and compare wth allowable overhung load (N) of selected unt Allowable overhung load (N) must be equal or more than calculated overhung load (P) 15.0kW 4 POLE R/IN Rato 2 Fm N Unt Desgnaton Servce Column Entry 1 Through 20 Spaces to be flled when enterng order Weght of mount unt K A L K A L K A L K A L K A L K A L K A L otor : If any of the followng condtons occur then consult Applcaton Engneerng:- a) Inerta of the Drven achne (Referred to motor speed) >10 b) Ambent temperature s above 40 o C Inerta of Gear Unt plus otor 6
11 OUTPUT BORE OPTIONS m1 m2 v3 Column 11 Entry Standard Hollow Shaft Standard Shrnk Dsc * Inch Hollow Shaft H X A on Left** Y on Rght** U T OD m Om3 m * See the dmenson pages at the rear of the catalogue ** Standard handng lookng on Input shaft n ountng Poston 1 (see unt handng pages) *** Non standard handng. K03 K04 K05 K06 K07 K08 K09 K10 K12 K15 K16 K18 Type of Bore Standard Inch Standard Inch Standard Inch Standard Inch Standard Inch Standard Inch Standard Inch Standard Inch Standard Inch Standard Inch Standard Inch Standard Inch Column 11 Entry Dmensons n mm (nch shaft n nches) Ø D m m1 m2 Øm3 T U v3 H / x50 A / UNF x 2 H / x55 A / UNF x 2.25 H / x70 A / UNF x 2.75 H / x70 A / UNF x 2.75 H / x70 A / UNF X 2.75 H / x80 A / UNF X 3.25 H / x80 A / UNF X 3.25 H / x80 A / UNF X 3.25 H / X110 A / UNF X 4.25 H / X 110 A / UNF X 4.25 H / X 110 A / UNF X 4.25 H / X 110 A / UNF X
12 OUTPUT SHAFT OPTIONS Column 11 Entry Standard Sngle Extenson C on Left E on Rght L11 L12 u t Od Standard Double Extenson D Inch Sngle Extenson N on Left B on Rght Inch Double Extenson P w L Type of Shaft Column 11 Entry Dmensons n mm (nch shaft n nches) ø d L L11 L12 t u W K03 Std Sngle/Double C / E / D / x 1.5 x 22 Inch Sngle/Double N / B / P " / " 1.85" * 1.69" 1.11" 0.250" 0.375" x 0.75" K04 Std Sngle/Double C / E / D / x 1.75 x 28 Inch Sngle/Double N / B / P "/ " 2.20" * 2.13" 1.36" 0.250" 0.5" UNF x 1.13" K05 Sngle/Double C / E / D / x 2.0 x 36 Inch Sngle/Double N / B / P " / " 2.60" * 2.50" 1.51" " UNF x 1.5" K06 Std Sngle C / E / x 2.0 x 36 Std Double D / x 2.0 x 36 Inch Sngle N / B 1.625" / 1.624" 3.00" * 2.50" 1.78" 0.375" 0.625" UNF x 1.5" Inch Double P " / " 3.00" * 2.50" 1.66" 0.375" 0.625" UNF x 1.5" K07 Std Sngle C / E / x 2.0 x 36 Std Double D / x 2.0 x 36 Inch Sngle/Double N / B / P 2.000" / 1.999" 3.74" * 3.00" 2.23" 0.500" 0.625" UNF x 1.5" K08 Std Sngle C / E / x 2.5 x 42 Std Double D / x 2.5 x 42 Inch Sngle N / B " / " 4.488" * 4.00" 2.65" 0.625" 0.75" UNF x 1.65" Inch Double P / * UNF x 1.65 K09 Std Sngle C / E / x 2.5 x 42 Std Double D / x 2.5 x 42 Inch Sngle N / B 2.875" / 2.874" 5.315" * 5.00" 3.20" 0.750" 0.75" UNF x 1.65" Inch Double P 2.625" / 2.624" 5.315" * 4.00" 3.03" 0.625" 0.75" UNF x 42" K10 Std Sngle C / E / x 2.5 x 42 Std Double D / x 2.5 x 42 Inch Sngle N / B 3.625" / 3.624" 6.772" * 6.38" 4.01" 0.875" 0.75" UNF x 1.65" Inch Double P 3.125" / 3.124" 6.417" * 5.00" 3.45" 0.750" 0.75" UNF x 42" K12 Std Sngle C / E / x 3.0 x 55 Std Double D / x 2.5 x 42 Inch Sngle N / B 4.375" / 4.374" 8.386" * 7.00" " 1.0" UNF x 2.17" Inch Double P 3.875" / 3.874" 7.874" * 7.00" " 1.0" UNF x 2.17" K15 Std Sngle/Double C / E / D / x 3.0 x 55 Inch Sngle/Double N / B / P 4.750" / 4.749" 8.27" * 7.13" " 1.0" UNF x 2.0" K16 Std Sngle/Double C / E / D / x 3.5 x 60 Inch Sngle/Double N / B / P 6.250" / " * 9.00" 6.91" 1.50" 1.25" UNF x2.5" K18 Std Sngle/Double C / E / D / x 3.5 x 60 Inch Sngle/Double N / B / P 7.500" / 7.499" 12.59" * 11.38" 8.27" 1.75" 1.5" UNF x 3.0" * Inch shaft has an open ended keyway, therefore no 'L11' dmenson s requred 8
13 OTOR ADAPTERS IEC & NEA Standard otor IEC B14- Column 12 entry otor K0332 K0432 K0532 K0632 K H H - H B K B K - G - G - G 90 D R D R Z J Z J - J 100 E S E S B L B L B L 112 E S E S B L B L B L D N Trple Reducton Unts Standard otor IEC B5- Column 12 entry otor K0332 K0432 K0532 K0632 K0732 K0832 K0932 K1032 K1232 K1532 K1632 K F F - F - V - V G G - G - D - D A J A J W F W F - F - D - E C Q C Q Y H Y H - H - E - F A K A K A K A F - G - E - G N - S W A K A K A K A F - G - E - G N - S W N P N P C B G - H - F - H P - T X E P C H A J A G A J Q A G N B K B H B K R B H P - - A - - A C L C J C L S C J Q - - B - - B D D K D T D K R - - C - - C E U - E L - - D E - D E F W - F - - F G - F G H J K H J K NEA otor C Face- Column 12 entry K0332 K0432 K0532 K0632 K0732 K0832 K0932 K1032 K1232 K1532 K1632 K1832 otor C T U T U - Q - Q - Q /145TC V W V W - R - R - R - N /184TC X - X - S T S T S T J P - S - P - N A - W X /215TC U - U - U V K Q - T - Q - P B - N A /256TC W - L U P U L R F Q C E P B /286TC Q V S G R D F Q C - - Q - - Q 324/326TC R W N T H S E G R D - - R - - R 364/365TC J T - H S S - - S 404/405TC K U - J T - - T U - T U 444/445TC V W X V W X 9
14 OTOR ADAPTERS IEC & NEA Quntuple Reducton Unts Standard otor IEC B14- Column 12 entry K0352 K0452 K0552 K0652 K0752 K0852 K0952 K1052 K1252 K1552 otor H H H H - H - H - H B K B K B K B K B K - G - G - G - G - G 90 D R D R D R D R D R Z J Z J - J - J - J 100 E S E S E S E S E S B L B L B L B L B L 112 E S E S E S E S E S B L B L B L B L B L D N D N D N Standard otor IEC B5- Column 12 entry K0352 K0452 K0552 K0652 K0752 K0852 K0952 K1052 K1252 K1552 K1652 K1852 otor F F F F - F - F - F - V - V G G G G - G - G - G - D - D A J A J A J A J A J W F W F - F - F - F - E - E 90 C Q C Q C Q C Q C Q Y H Y H - H - H - H - - F A K A K A K A K A K - G - G A K A K A K A K A K - G - G N P N P C C C - H - H E P E P E P A J A J B K B K C L C L D D NEA otor C Face- Column 12 entry K0352 K0452 K0552 K0652 K0752 K0852 K0952 K1052 K1252 K1552 K1652 K1852 otor C T U T U T U T U T U - Q - Q - Q - Q - Q /145TC V W V W V W V W V W - R - R - R - R - R /184TC X - X - X - X - X - S T S T S T S T S T - S - S 213/215TC U - U - U V U V U V - T - T 254/256TC W - W - W - P U P U 284/286TC Q V Q V 324/326TC R W R W 10
15 LUBRICATION K03, K04, K05, K06 & K07 Unts & Prmary Unts used for Quntuple Reducton, are suppled factory flled wth EP mneral ol (Grade 6E) approprate to the ntended mountng poston. If the unt s suppled wthout lubrcant the unt must be flled wth the correct lubrcant and quantty as lsted below: K08, K09, K10, K12, K15, K16, K18 Unts, requre fllng wth EP mneral ol (Grade 6E) Lubrcant quanttes are approxmate fll untl ol escapes from the level plug hole, ft ventlator plug (when suppled) n the approprate poston for the requred mountng poston (see nstallaton and mantenance nstructons) Temperature Lmtatons The standard lubrcant s sutable for operaton n ambent temperatures of 0 to 35 C, outsde of ths consult Table 1 or consult Applcaton Engneerng. Table 1 Ol Grades Lubrcant EP neral Ol (type E) -5 o C - 20 o C (E) -30 o C - 20 o C (H) Ambent temperature range 0 o C - 35 o C 20 o C - 50 o C 5E (VG 220) 6E (VG 320) 7E (VG 460) Polyalphaolefn d Synthetc (type H) 5H (VG 220) 5H (VG 220) 6H (VG 320) Lubrcant Quanttes (Ltres) Trple Reducton ountng Poston K0332 K0432 K0532 K0632 K0732 K0832 K0932 K1032 K1232 K1532 K1632 K ountng Poston Quntuple Reducton K0352 K0452 K0552 K0652 K0752 K0852 Prmary Secondary Prmary Secondary Prmary Secondary Prmary Secondary Prmary Secondary Prmary 0122 K K K K K K Secondary ountng Poston Quntuple reducton.. Contnued K0952 K1052 K1252 K1552 K1652 K1852 Prmary Secondary Prmary Secondary Prmary Secondary Prmary Secondary Prmary Secondary Prmary Secondary 0522 K K K K K K
16 OUNTING POSITIONS Column 13 entry Base ounted Unts 6 * 1 2 Flange ounted Unts * 2 1 * Not Recommended for Geared otors Applcaton Engneerng 5 3 Gear Unts selected for use n mountng postons 5 and 6 should only be used wth overall ratos greater or equal to those shown n the table below Input () < 1000 < 1500 < 1800 > 1800 K08 All All All K09 All K K12- K Consult Applcaton Engneerng 4 ountng Postons - shown as motorsed - apples also for reducers Column 14 entry 270o All motors Column 14 entry Termnal Box Poston 180o 0 o A 0 o B 90 o C 180 o D 270 o - Reducer or no motor ftted 90 o 12
17 UNIT HANDINGS Column 9 Entry Left Rght Std Unt wth Flange F H Std Unt wth Bracket T Q Column 11 Entry Left etrc Rght Left Inch Rght Sngle Shaft C E N B Double Shaft D P Hollow Shaft H A Shrnk Dsc Y Drven achne Sde X Drven achne Sde Note: non-standard handng, please contact Applcaton Engneerng 13
18 OTORISED 14
19 OTOR PERFORANCE DATA TEFC Squrrel Cage 3 Phase otors 4 poles = V, 50Hz, S1 IP55, Class F IE2 Effcency Class P (kw) I (A) Ist / I Tst / T J (m 2 ) S L L L S L L L S S S L Key Frame n RP TEFC Squrrel Cage 3 Phase otors 6 poles = V, 50Hz, S1 IP55, Class F IE2 Effcency Class P (kw) Frame I (A) Ist / I Tst / T J (m 2 ) S L L S L L L L S S L L I = Nomnal current Ist/I= Startng current factor Tst/T = Startng torque factor J= otor moment of nerta P= Rated output power n= otor speed T = Rated output torque n RP Recalculaton s Fv Recalculaton factors for current at rated voltages other than 400V, 50 Hz. 60 Hz Operaton otors wound for a certan voltage at 50 Hz can be operated at 60 Hz, wthout any modfcatons, subject to the followng changes n ther data 50 Hz Fv 220V V V 0,96 500V 0,80 660V 0,61 690V 0,58 60 Hz P (kw) n () I (A) Ist (I) T () Tst (T) 380V 100% 120% 100% 80% 83% 66% 400V 100% 120% 98% 83% 83% 70% 415V 105% 120% 100% 8%8 86% 78% 440V 110% 120% 100% 95% 91% 85% 460V 115% 120% 100% 100% 96% 95% 480V 120% 120% 100% 105% 100% 100% 15
20 k0 kbr g1 mv Og6 Om On Od k0 Og mv B14 'C' face OTOR DETAILS kbr g1 Og6 Om On Od e Og Os øg6 øm øn ød e ko kbr øg g1 m øs e deg Os 4x deg 4x6 90S deg 4x8 90L deg 4x8 100L deg 4x deg 4x8 132S kbr deg 4x k g145 deg 4x10 B5 'D' face kbr Og6 Om On Od k0 Og mv g1 mv Og6 Om On Od e Og Os e Os øg6 øm øn ød e ko kbr øg g1 m øs deg 4x9 (8) deg 4x9 (8) deg 4x11 (10) 90S deg 4x11 (10) 90L deg 4x11 (10) 100L deg 4x14 (12) deg 4x14 (12) 132S deg 4x14 (12) deg 4x14 (12) deg 4x18 (16) 160L deg 4x18 (16) deg 4x18 (16) 180L deg 4x18 (16) 200L deg 4x18 (16) 225S deg 8x18 (16) deg 8x18 (16) deg 8x18 (16) 280S deg 8x18 (16) deg 8x18 (16) 315S deg 8x22 (20) deg 8x22 (20) 315L deg 8x22 (20) * otor lengths for own brand standard motors. These lengths may vary f alternatve motor s ftted. 16
21 ADDITIONAL OTOR FEATURES Addtonal otor Features - column 19 entry Column 19 Entry Brake otor Hand Release on Brake Forced Ventlaton/ Constant Blower (TECB) Thermstor Specal - A B C D E F G H K L S Please refer to Applcaton Engneerng for detals of the followng addtonal motor features - PGF encoder flange - Wash down - Customsed brake torque - Separate brake supply - Alumnum fan - Ant Condensaton heater - B-metal temperature detectors, Thermostat - EExEIIT3 - Ex na II T3 - IP56 - IP65 - etal fan cover - Ran cowl - Separate termnal box 17
22 ADDITIONAL GEARBOX FEATURES Addtonal Gearbox Features - column 20 entry Column 20 Entry Double shaft Ol seals * otorsed Backstop Ol Level Glass K07- K18 CW Rotaton CCW Rotaton Specal - A B C D E F G H I J K L Please refer to Applcaton Engneerng for detals of the specal addtonal gearbox features for example :- - Prme pant only - Wash down - BISSC compatble - Specal ol (food compatble, bo-degradable, dfferent vscostes etc) * IEC Frame s , NEA frame szes 182TC - 326TC 18
23 EXACT RATIOS Exact Ratos - Trple Reducton Column Entry K0332 K0432 K0532 K0632 K0732 K0832 K0932 K1032 K1232 K1532 K1632 K Exact Ratos - Quadruple Reducton Column Entry K0352 K0452 K0552 K0652 K0752 K0852 K0952 K1052 K1252 K1552 K1652 K C C C C C C C C C C C C C C C C C C
24 0.12 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A otor K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K065210C -.12A K065211C -.12A K065212C -.12A avalable usng 2 and Applcaton Engneerng K A K A K A K A K A K075210C -.12A K075211C -.12A K075212C -.12A K075214C -.12A K075216C -.12A K075218C -.12A K075220C -.12A K075222C -.12A
25 0.12 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K075210C -.12C K075211C -.12C K075212C -.12C K075214C -.12C otor avalable usng 2 and Applcaton Engneerng 21
26 0.18 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A otor K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A avalable usng 2 and Applcaton Engneerng K A K A K A K A K A K A K A K075210C -.18A K075211C -.18A K075212C -.18A K075214C -.18A K075216C -.18A
27 0.18 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C otor K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K075210C -.18C avalable usng 2 and Applcaton Engneerng 23
28 0.25 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A otor K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K075210C -.25A K075211C -.25A K075212C -.25A avalable usng 2 and Applcaton Engneerng 24
29 0.25 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C otor K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C kw 4 POLE avalable usng 2 and Applcaton Engneerng K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A
30 0.37 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A K A K A K A K A otor K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K085210C -.37A K085211C -.37A K085212C -.37A kw 6 POLE avalable usng 2 and Applcaton Engneerng K A K A K A K A K A K A K095210C -.37A K095211C -.37A K095212C -.37A K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C
31 0.37 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C K C K C K C K C K C K C K C otor K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K095210C -.37C K095211C -.37C K095212C -.37C K C K C K C K C K C K C K105210C -.37C K105211C -.37C K105212C -.37C K105214C -.37C K105216C -.37C K105218C -.37C K105220C -.37C K105222C -.37C avalable usng 2 and Applcaton Engneerng K C K C K125210C -.37C K125211C -.37C K125212C -.37C K125214C -.37C K125216C -.37C K125218C -.37C K125220C -.37C K125222C -.37C K125225C -.37C K125228C -.37C K125232C -.37C K125236C -.37C K125240C -.37C
32 0.37 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K155216C -.37C K155218C -.37C K155220C -.37C K155222C -.37C K155225C -.37C K155228C -.37C K155232C -.37C K155236C -.37C K155240C -.37C K155245C -.37C K155250C -.37C K155256C -.37C K155263C -.37C otor K165225C -.37C K165228C -.37C K165232C -.37C K165236C -.37C K165240C -.37C K165245C -.37C K165250C -.37C K165256C -.37C K165263C -.37C kw 4 POLE K185236C -.37C K185240C -.37C K185245C -.37C K185250C -.37C K185256C -.37C K185263C -.37C K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A avalable usng 2 and Applcaton Engneerng K A K A K A K A K A K A K A K A K A
33 0.55 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A K A K A K A K A otor K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K095210C -.55A K095211C -.55A K095212C -.55A K095214C -.55A avalable usng 2 and Applcaton Engneerng K A K A K A K A K A K105210C -.55A K105211C -.55A K105212C -.55A K105214C -.55A K105216C -.55A K105218C -.55A K105220C -.55A K105222C -.55A
34 0.55 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A K125210C -.55A K125211C -.55A K125212C -.55A K125214C -.55A K125216C -.55A K125218C -.55A K125220C -.55A K125222C -.55A K125225C -.55A K125228C -.55A K125232C -.55A K125236C -.55A K125240C -.55A otor K155216C -.55A K155218C -.55A K155220C -.55A K155222C -.55A K155225C -.55A K155228C -.55A K155232C -.55A K155236C -.55A K155240C -.55A K155245C -.55A K155250C -.55A K155256C -.55A K155263C -.55A K165225C -.55A K165228C -.55A K165232C -.55A K165236C -.55A K165240C -.55A K165245C -.55A K165250C -.55A K165256C -.55A K165263C -.55A K185236C -.55A K185240C -.55A K185245C -.55A K185250C -.55A K185256C -.55A K185263C -.55A kw 6 POLE avalable usng 2 and Applcaton Engneerng K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C
35 0.55 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C K C K C K C K C K C K C K C K C K C K C otor K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C avalable usng 2 and Applcaton Engneerng K C K C K C K C K C K C K C K C K105210C -.55C K105211C -.55C K105212C -.55C K105214C -.55C K105216C -.55C K105211C -.55C K105212C -.55C K105214C -.55C K105216C -.55C
36 0.55 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C K C K C K C K C K125210C -.55C K125211C -.55C K125212C -.55C K125214C -.55C K125216C -.55C K125218C -.55C K125220C -.55C K125222C -.55C K125225C -.55C K125228C -.55C otor K155210C -.55C K155211C -.55C K155212C -.55C K155214C -.55C K155216C -.55C K155218C -.55C K155220C -.55C K155222C -.55C K155225C -.55C K155228C -.55C K155232C -.55C K155236C -.55C K155240C -.55C K155245C -.55C K165216C -.55C K165218C -.55C K165220C -.55C K165222C -.55C K165225C -.55C K165228C -.55C K165232C -.55C K165236C -.55C K165240C -.55C K165245C -.55C K165250C -.55C K165256C -.55C K165263C -.55C K185225C -.55C K185228C -.55C K185232C -.55C K185236C -.55C K185240C -.55C K185245C -.55C K185250C -.55C K185256C -.55C K185263C -.55C kw 4 POLE avalable usng 2 and Applcaton Engneerng K A K A K A K A K A K A K A K A K A K A K A K A K A
37 0.75 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A K A K A K A K A K A K A K A K A K A K A K A K A K A otor K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A avalable usng 2 and Applcaton Engneerng K A K A K A K A K A K A K A K A K A K A K A
38 0.75 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A K A K A K A K A K A K A K A K105210C -.75A K105211C -.75A K105212C -.75A K105214C -.75A K105216C -.75A otor K A K A K A K A K125210C -.75A K125211C -.75A K125212C -.75A K125214C -.75A K125216C -.75A K125218C -.75A K125220C -.75A K125222C -.75A K125225C -.75A K125228C -.75A K125232C -.75A K155212C -.75A K155214C -.75A K155216C -.75A K155218C -.75A K155220C -.75A K155222C -.75A K155225C -.75A K155228C -.75A K155232C -.75A K155236C -.75A K155240C -.75A K155245C -.75A K165218C -.75A K165220C -.75A K165222C -.75A K165225C -.75A K165228C -.75A K165232C -.75A K165236C -.75A K165240C -.75A K165245C -.75A K165250C -.75A K165256C -.75A K165263C -.75A avalable usng 2 and Applcaton Engneerng K185228C -.75A K185232C -.75A K185236C -.75A K185240C -.75A K185245C -.75A K185250C -.75A K185256C -.75A K185263C -.75A
39 0.75 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S otor K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S avalable usng 2 and Applcaton Engneerng K C S K C S K C S K C S K C S K C S K C S K C S K C S 35
40 0.75 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C S K C S K C S K C S otor K C S K C S K C S K C S K C S K C S K C S K C S K105210C -.75C S K105211C -.75C S K C S K C S K C S K C S K C S K C S K C S K125210C -.75C S K125211C -.75C S K125212C -.75C S K125214C -.75C S K125216C -.75C S K125218C -.75C S K125220C -.75C S K C S K C S K155210C -.75C S K155211C -.75C S K155212C -.75C S K155214C -.75C S K155216C -.75C S K155218C -.75C S K155220C -.75C S K155222C -.75C S K155225C -.75C S K155228C -.75C S K155232C -.75C S K165212C -.75C S K165214C -.75C S K165216C -.75C S K165218C -.75C S K165220C -.75C S K165222C -.75C S K165225C -.75C S K165228C -.75C S K165232C -.75C S K165236C -.75C S K165240C -.75C S K165245C -.75C S K165250C -.75C S avalable usng 2 and Applcaton Engneerng K185218C -.75C S K185220C -.75C S K185222C -.75C S K185225C -.75C S K185228C -.75C S K185232C -.75C S K185236C -.75C S K185240C -.75C S K185245C -.75C S K185250C -.75C S K185256C -.75C S K185263C -.75C S 36
41 1.1 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S otor K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S avalable usng 2 and Applcaton Engneerng K A S K A S K A S K A S K A S K A S K A S K A S 37
42 1.1 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A S K A S K A S K A S K A S K A S otor K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K105210C - 1.1A S K105211C - 1.1A S K105212C - 1.1A S K A S K A S K A S K A S K A S K A S K A S K125210C - 1.1A S K125211C - 1.1A S K125212C - 1.1A S K125214C - 1.1A S K125216C - 1.1A S K125218C - 1.1A S K125220C - 1.1A S avalable usng 2 and Applcaton Engneerng K A S K A S K155210C - 1.1A S K155211C - 1.1A S K155212C - 1.1A S K155214C - 1.1A S K155216C - 1.1A S K155218C - 1.1A S K155220C - 1.1A S K155222C - 1.1A S K155225C - 1.1A S K155228C - 1.1A S K155232C - 1.1A S K155236C - 1.1A S 38
43 1.1 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K165212C - 1.1A S K165214C - 1.1A S K165216C - 1.1A S K165218C - 1.1A S K165220C - 1.1A S K165222C - 1.1A S K165225C - 1.1A S K165228C - 1.1A S K165232C - 1.1A S K165236C - 1.1A S K165240C - 1.1A S K165245C - 1.1A S K165250C - 1.1A S otor K185218C - 1.1A S K185220C - 1.1A S K185222C - 1.1A S K185225C - 1.1A S K185228C - 1.1A S K185232C - 1.1A S K185236C - 1.1A S K185240C - 1.1A S K185245C - 1.1A S K185250C - 1.1A S K185256C - 1.1A S K185263C - 1.1A S 1.1 kw 6 POLE K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L avalable usng 2 and Applcaton Engneerng K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L 39
44 1.1 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L otor K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L avalable usng 2 and Applcaton Engneerng 40
45 1.1 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C L K C L K C L K C L K C L K C L K C L K C L K125210C - 1.1C L K125211C - 1.1C L K125212C - 1.1C L otor K C L K C L K C L K C L K C L K C L K155210C - 1.1C L K155211C - 1.1C L K155212C - 1.1C L K155214C - 1.1C L K155216C - 1.1C L K155218C - 1.1C L K155220C - 1.1C L K155222C - 1.1C L K C L K C L K165210C - 1.1C L K165211C - 1.1C L K165212C - 1.1C L K165214C - 1.1C L K165216C - 1.1C L K165218C - 1.1C L K165220C - 1.1C L K165222C - 1.1C L K165225C - 1.1C L K165228C - 1.1C L K165232C - 1.1C L K165236C - 1.1C L K185212C - 1.1C L K185214C - 1.1C L K185216C - 1.1C L K185218C - 1.1C L K185220C - 1.1C L K185222C - 1.1C L K185225C - 1.1C L K185228C - 1.1C L K185232C - 1.1C L K185236C - 1.1C L K185240C - 1.1C L K185245C - 1.1C L K185250C - 1.1C L K185256C - 1.1C L avalable usng 2 and Applcaton Engneerng 41
46 1.5 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A L K A L K A L K A L K A L K A L otor K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L avalable usng 2 and Applcaton Engneerng K A L K A L K A L K A L K A L K A L K A L K A L K A L 42
47 1.5 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A L K A L K A L K A L K A L K A L K A L otor K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K125210C - 1.5A L K125211C - 1.5A L K125212C - 1.5A L K125214C - 1.5A L K A L K A L K A L K A L K A L K155210C - 1.5A L K155211C - 1.5A L K155212C - 1.5A L K155214C - 1.5A L K155216C - 1.5A L K155218C - 1.5A L K155220C - 1.5A L K155222C - 1.5A L avalable usng 2 and Applcaton Engneerng K A L K165210C - 1.5A L K165211C - 1.5A L K165212C - 1.5A L K165214C - 1.5A L K165216C - 1.5A L K165218C - 1.5A L K165220C - 1.5A L K165222C - 1.5A L K165225C - 1.5A L K165228C - 1.5A L K165232C - 1.5A L K165236C - 1.5A L 43
48 1.5 kw 4 POLE 1.5 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K185214C - 1.5A L K185216C - 1.5A L K185218C - 1.5A L K185220C - 1.5A L K185222C - 1.5A L K185225C - 1.5A L K185228C - 1.5A L K185232C - 1.5A L K185236C - 1.5A L K185240C - 1.5A L K185245C - 1.5A L K185250C - 1.5A L K185256C - 1.5A L K C L K C L K C L K C L otor K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L avalable usng 2 and Applcaton Engneerng K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L 44
49 1.5 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C L K C L K C L K C L K C L K C L K C L otor K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K125210C - 1.5C L avalable usng 2 and Applcaton Engneerng K C L K C L K C L K C L K C L K C L K C L K C L K155210C - 1.5C L K155211C - 1.5C L K155212C - 1.5C L K155214C - 1.5C L K155216C - 1.5C L K155218C - 1.5C L 45
50 1.5 kw 6 POLE 2.2 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C L K C L K C L K C L K165210C - 1.5C L K165211C - 1.5C L K165212C - 1.5C L K165214C - 1.5C L K165216C - 1.5C L K165218C - 1.5C L K165220C - 1.5C L K165222C - 1.5C L K165225C - 1.5C L K165228C - 1.5C L K C L K185210C - 1.5C L K185212C - 1.5C L K185214C - 1.5C L K185214C - 1.5C L K185216C - 1.5C L K185218C - 1.5C L K185220C - 1.5C L K185222C - 1.5C L K185225C - 1.5C L K185228C - 1.5C L K185232C - 1.5C L K185236C - 1.5C L K A L K A L K A L K A L otor K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L avalable usng 2 and Applcaton Engneerng K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L 46
51 2.2 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L otor K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L avalable usng 2 and Applcaton Engneerng K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K125210C - 2.2A L 47
52 2.2 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A L K A L K A L K A L K A L K A L K A L K A L K155210C - 2.2A L K155211C - 2.2A L K155212C - 2.2A L K155214C - 2.2A L otor K A L K A L K A L K A L K165210C - 2.2A L K165211C - 2.2A L K165212C - 2.2A L K165214C - 2.2A L K165216C - 2.2A L K165218C - 2.2A L K165220C - 2.2A L K165222C - 2.2A L K165225C - 2.2A L K165228C - 2.2A L K A L K185210C - 2.2A L K185212C - 2.2A L K185214C - 2.2A L K185214C - 2.2A L K185216C - 2.2A L K185218C - 2.2A L K185220C - 2.2A L K185222C - 2.2A L K185225C - 2.2A L K185228C - 2.2A L K185232C - 2.2A L K185236C - 2.2A L K185240C - 2.2A L avalable usng 2 and Applcaton Engneerng 2.2 kw 6 POLE K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C
53 2.2 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C K C K C K C K C K C K C K C K C K C K C K C otor K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C avalable usng 2 and Applcaton Engneerng K C K C K C K C K C K C K C K C K C K C K C
54 2.2 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C K C K C K C K C K C K C K C K C K C K C K C otor K C K C K C K C K C K C K C K C K C K C K C K C K155210C - 2.2C K155211C - 2.2C K155212C - 2.2C K C K C K C K C K165210C - 2.2C K165211C - 2.2C K165212C - 2.2C K165214C - 2.2C K165216C - 2.2C K165218C - 2.2C K C K C K C K C K185210C - 2.2C K185212C - 2.2C K185214C - 2.2C K185214C - 2.2C K185216C - 2.2C K185218C - 2.2C K185220C - 2.2C K185222C - 2.2C K185225C - 2.2C K185228C - 2.2C avalable usng 2 and Applcaton Engneerng 50
55 3.0 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A L K A L K A L K A L K A L K A L otor K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L avalable usng 2 and Applcaton Engneerng K A L K A L K A L K A L K A L K A L K A L K A L K A L 51
56 3.0 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A L K A L K A L K A L otor K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K155210C - 3.0A L K155211C - 3.0A L K155212C - 3.0A L K A L K A L K A L K A L K165210C - 3.0A L K165211C - 3.0A L K165212C - 3.0A L K165214C - 3.0A L K165216C - 3.0A L K165218C - 3.0A L avalable usng 2 and Applcaton Engneerng K A L K A L K A L K185210C - 3.0A L K185212C - 3.0A L K185214C - 3.0A L K185214C - 3.0A L K185216C - 3.0A L K185218C - 3.0A L K185220C - 3.0A L K185222C - 3.0A L K185225C - 3.0A L K185228C - 3.0A L 52
57 3.0 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C S K C S K C S K C S K C S K C S K C S otor K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S avalable usng 2 and Applcaton Engneerng K C S K C S K C S K C S K C S K C S K C S K C S 53
58 3.0 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C S K C S K C S K C S K C S otor K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K165210C - 3.0C S K165211C - 3.0C S K165212C - 3.0C S K165214C - 3.0C S K C S K C S K C S K C S K185210C - 3.0C S K185212C - 3.0C S K185214C - 3.0C S K185214C - 3.0C S K185216C - 3.0C S K185218C - 3.0C S K185220C - 3.0C S K185222C - 3.0C S avalable usng 2 and Applcaton Engneerng 54
59 4.0 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A K A K A K A otor K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A avalable usng 2 and Applcaton Engneerng K A K A K A K A K A K A K A K A K A K A K A
60 4.0 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A K A K A K A otor K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K155210C - 4.0A K A K A K A K A K165210C - 4.0A K165211C - 4.0A K165212C - 4.0A K165214C - 4.0A avalable usng 2 and Applcaton Engneerng K A K A K A K A K185210C - 4.0A K185212C - 4.0A K185214C - 4.0A K185214C - 4.0A K185216C - 4.0A K185218C - 4.0A K185220C - 4.0A K185222C - 4.0A
61 4.0 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C K C K C K C K C otor K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C avalable usng 2 and Applcaton Engneerng K C K C K C K C K C K C K C K C K C K C K C K C K C K C
62 4.0 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C K C K C K C K C K C K C K C otor K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K165210C - 4.0C K C K C K C K C K185210C - 4.0C K185211C - 4.0C kw 4 POLE K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S avalable usng 2 and Applcaton Engneerng K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S 58
63 5.5 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A S K A S K A S K A S K A S K A S K A S otor K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S avalable usng 2 and Applcaton Engneerng K A S K A S K A S K A S K165210C - 5.5A S K165211C - 5.5A S K A S K A S K A S K A S K185210C - 5.5A S K185211C - 5.5A S 59
64 5.5 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C K C otor K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C avalable usng 2 and Applcaton Engneerng K C K C K C K C K C K C K C K C K C K C K C K C
65 5.5 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C K C K C otor K C K C K C K C K C K C K C K C K C K C K C kw 4 POLE K C K C K C K C K185210C - 5.5C K185211C - 5.5C K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A avalable usng 2 and Applcaton Engneerng K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A
66 7.5 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A K A K A K A K A K A K A K A K A otor K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K185210C - 7.5A K185211C - 7.5A avalable usng 2 and Applcaton Engneerng 62
67 7.5 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C K C K C K C K C K C otor K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C avalable usng 2 and Applcaton Engneerng K C K C K C K C K C K C K C K C K C K C K C K C
68 7.5 kw 6 POLE 11.0 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K A K A K A K A K A K A K A otor K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A avalable usng 2 and Applcaton Engneerng K A K A K A K A K A K A K A K A K A K A K A K A
69 11.0 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A K A K A K A K A K A K A K A otor K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A kw K C L 6 POLE avalable usng 2 and Applcaton Engneerng K C L K C L K C L K C L K C L K C L K C L 65
70 11.0 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L otor K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L avalable usng 2 and Applcaton Engneerng K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L 66
71 15.0 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A L K A L K A L K A L otor K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L avalable usng 2 and Applcaton Engneerng K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L 67
72 15.0 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A L K A L K A L K A L K A L K A L K A L K A L K A L otor K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L 15.0 kw 6 POLE K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L avalable usng 2 and Applcaton Engneerng K C L K C L K C L K C L K C L K C L K C L K C L K C L 68
73 15.0 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C L K C L K C L K C L K C L otor K C L K C L K C L K C L K C L K C L K C L K C L 18.5 kw 4 POLE K C L K C L K C L K C L K C L K C L K C L K C L K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A avalable usng 2 and Applcaton Engneerng K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A
74 18.5 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A K A K A K A otor K A K A K A K A K A K A K A kw 6 POLE K A K A K A K A K A K A K A K A K A K A K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L avalable usng 2 and Applcaton Engneerng K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L 70
75 18.5 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C L K C L K C L K C L K C L K C L K C L otor K C L K C L K C L K C L K C L K C L K C L 22.0 kw 4 POLE K C L K C L K C L K C L K C L K C L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L avalable usng 2 and Applcaton Engneerng K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L 71
76 22.0 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A L K A L K A L K A L K A L otor K A L K A L K A L K A L K A L K A L K A L 22.0 kw 6 POLE K A L K A L K A L K A L K A L K A L K A L K A L K A L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L avalable usng 2 and Applcaton Engneerng K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L 72
77 22.0 kw 6 POLE 2 GEARED OTORS Fm N Unt Desgnaton Servce Column Entry Weght of 1-20 otor Rato Blanks to be flled when enterng order mount unt K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L 30.0 kw 4 POLE K C L K C L K C L K C L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L avalable usng 2 and Applcaton Engneerng K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L 73
78 30.0 kw 4 POLE 2 GEARED OTORS Fm N Unt Desgnaton Servce Column Entry Weght of 1-20 otor Rato Blanks to be flled when enterng order mount unt K A L K A L K A L K A L K A L K A L K A L 30.0 kw 6 POLE K A L K A L K A L K A L K A L K A L K A L K A L K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C avalable usng 2 and Applcaton Engneerng K C K C K C K C K C K C K C K C K C K C
79 37.0 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A S K A S K A S K A S K A S otor K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S avalable usng 2 and Applcaton Engneerng K A S K A S K A S K A S K A S K A S K A S K A S K A S 75
80 37.0 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C K C K C K C K C K C K C K C K C K C K C otor K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C avalable usng 2 and Applcaton Engneerng 76
81 45.0 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A K A K A K A otor K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A avalable usng 2 and Applcaton Engneerng K A K A K A
82 45.0 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S otor K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S avalable usng 2 and Applcaton Engneerng 78
83 55.0 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A K A K A K A K A K A K A K A K A K A K A otor K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A avalable usng 2 and Applcaton Engneerng 79
84 55.0 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C K C K C K C K C K C K C K C otor K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C K C avalable usng 2 and Applcaton Engneerng 80
85 75.0 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A S K A S K A S K A S K A S K A S K A S K A S otor K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S avalable usng 2 and Applcaton Engneerng 81
86 75.0 kw 6 POLE 90.0 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K C S K A K A K A K A K A K A K A otor K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A avalable usng 2 and Applcaton Engneerng 82
87 90.0 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C K C K C K C K C K C K C K C K C otor K C K C K C K C K C K C K C K C K C K C K C kw 4 POLE K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S K A S avalable usng 2 and Applcaton Engneerng 83
88 110 kw 6 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K C K C K C K C K C otor K C K C K C K C K C K C K C K C K C K C K C kw 4 POLE K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A K A kw 6 POLE K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L K C L avalable usng 2 and Applcaton Engneerng 84
89 160 kw 4 POLE Rato 2 Fm N Unt Desgnaton Servce Blanks to be flled when enterng order GEARED OTORS Weght of mount unt K A L K A L K A L K A L K A L K A L K A L K A L otor K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L K A L avalable usng 2 and Applcaton Engneerng 85
90 DIENSIONS TRIPLE REDUCTION n0 q k1 k0 w7 o o z f0 a3 b0 b2 a2 b1 f b h1 S n c m m1 m2 m3 m U g v4 s T D a e h p3 a a2 a3 b b0 b1 b2 c e f f0 h h1 n n0 o p3 q s w7 z K K K K K K K K K K K K D (H7) m m1 m2 m3 T U v4 K X50 K X55 K X70 K X70 K X70 K X80 K X80 K X80 K X110 K X110 K X110 K X110 K0332 K0432 K0532 K0632 K0732 K0832 K0932 K1032 K1232 K1532 K1632 K1832 k0 g K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K S L L S L L L S S S L ** otor lengths k0 for standard own brand motors can be found on the motor detals page 86
91 DIENSIONS QUINTUPLE REDUCTION n0 q k1 * k0 w7 o o z f0 b0 b2 h1 g p3 s c v2 v3 m1 m2 v4 s h a3 a2 b1 f b n m m3 m U T D a e a a2 a3 b b0 b1 b2 c e f f0 h h1 n n0 o p3 q s v2 v3 w7 z K K K K K K K K K K K K D (H7) m m1 m2 m3 T U v4 K X50 K X55 K X70 K X70 K X70 K X80 K X80 K X80 K X110 K X110 K X110 K X110 K0352 K0452 K0552 K0652 K0752 K0852 K0952 K1052 K1252 K1552 K1652 K1852 k0 g K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K S L L S L L L S ** otor lengths k0 for standard own brand motors can be found on the motor detals page 87
92 OPTIONS Sngle Extended Shaft Double Extended Shaft Shrnk Dsc Bracket B5 (D) Flange ountng B14 (C) Flange ountng 88
93 OTORISED BACKSTOP ODULE otorsed backstop modules can be ftted between the gear unt and motor. The backstop devce ncorporates hgh qualty centrfugal lft off sprags whch are wear free above the lft off speed (n mn). To ensure correct operaton motor speed must exceed lft off speed. Sutable for ambent temperature -40 o C to + 50 o C q k1 kh k0 Og6 Warnng Removal of motor or backstop wll release the drve. Ensure all drven machnery s secure pror to any mantenance work IEC B5 Flange Lft off ( n mn) (rev/mn) Rated Lockng ( T max ) (at motor) () øg6 Kh NEA C Flange Lft off ( n mn) (rev/mn) Rated Lockng ( T max ) (at motor) () øg6 Kh 182TC / 184TC TC / 215TC TC / 256TC TC / 286TC TC / 326TC When a backstop module s ftted dmenson Kh should be added to the overall length of the geared motor assembly. Rotaton of outputshaft must be specfed when orderng as vewed from the outputshaft end (as shown n the dagram) CW - Free Rotaton - Clockwse Locked - Antclockwse AC - Free Rotaton - Antclockwse Locked - Clockwse CW 89
94 REDUCER 90
95 axmum Permssble s (Newtons) P = kw x 9,500,000 x K N x R OVERHUNG & AXIAL LOADS ON SHAFTS When a sprocket, gear etc. s mounted on the shaft a calculaton, as below, must be made to determne the overhung load (P) on the shaft, and the results compared to the maxmum permssble overhung loads tabulated (Fra or Frb). loads can be reduced by ncreasng the dameter of the sprocket, gear, etc. If the maxmum permssble overhung load s exceeded, the sprocket, gear, etc. should be mounted on a separate shaft, flexbly coupled and supported n ts own bearngs, or the gear unt shaft could be extended to run n an outboard bearng. Permssble overhung loads vary accordng to the drecton of rotaton. The values tabulated are for the most unfavourable drecton wth the unt transmttng full rated power, wth load P appled mdway along the shaft extenson. Hence they may be ncreased for a more favourable drecton of rotaton, or f the power transmtted s less than the rated capacty of the gear unt - consult our Applcaton Engneers for detals. The poston of the sprocket, gear etc should be as close to the gear unt case as possble, should the poston of the outputshaft load P vary from mdway along the shaft extenson, the allowable tabulated loads Fra shall be adjusted by FL (see detals below) All unts wll accept 100% momentary overload on stated capactes The appled load P should not exceed tabulated values Fra and Frb ember K (factor) Chan sprocket* 1.00 Spur or helcal pnon 1.25 Vee belt sheave 1.50 Flat belt pulley 2.00 Where P = equvalent overhung load (Newtons) kw = power transmtted by the shaft (klowatts) N = speed of shaft (rev/mn) R = ptch radus of sprocket, etc. (mm) K L15 = factor Note: 1 Newton = kp = lbf. L16 L13 B Frb * If multstrand chan drves are equally loaded and the outer strand s further than dmenson A output or B nput, refer to Applcaton Engneerng. Shaft s (Fra) Consult the Gear Unt Ratngs Tables for value Fra The Fra values tabulated assume load P s appled mdway along the shaft extenson (dmenson A n the table below) If load P s appled n a dfferent poston the tabulated value Fra shall be adjusted by the followng formula: Fra x FL FL = C x D (D+Lx) Lx = Dstance (mm) to the appled load P from the shaft shoulder Constants A (mm) B (mm) C D K K B Frb kh k0 Inputshaft s, Frb (kn) 1450 The Frb values tabulated below assume load P s appled mdway along the shaft extenson (dmenson B n the table above) K03 K04 K05 K06 K07 K08 K09 K10 K12 K15 K16 K18 3 Stage Stage A Fra K K K07 48 K08 57 K09 68 K10 86 K K K K K K K K K K K K K K K K K K K K Axal Thrust Capactes (Newtons) No check or calculaton s requred f the axal thrust load (FA) towards or away from the unt s under 50% of the permssble overhung load. If the axal thrust consderably exceeds these values or f there s a combnaton of axal thrust loads and overhung loads please contact our Applcaton Engneers. Og6 91
96 THERAL POWER RATING Thermal Ratngs kw at 25 Cº Ambent Temperature - 3 Stage Unts Thermal ratngs are a measure of the unts ablty to dsspate heat, f they are exceeded the lubrcant may break down resultng n premature gear falure. Thermal ratng are d on an ambent temperature of 25 o C, where unts are to operate n other ambent temperatures thermal ratngs must be adjusted by the followng factors Note! Ambent Temp odfng Ft When checkng thermal capactes use the load requred to be transmtted, not the ratng of prme -20ºC -10ºC 0ºC 10ºC 20ºC 25ºC 35ºC 40ºC 45ºC 50ºC mover Unts Operatng n ountng Poston s 5 & 6 Thermal ratngs for poston s 5 & 6 are reduced to 70% of the tabulated values. nmum rato s permtted for postons 5 & 6 are dependant on nput speed () and unt sze - see table Thermal Ratng kw - Unts wthout addtonal coolng n1 (:1) () K K K K K K K K K K K K Thermal Ratng kw - Unts wth fan coolong n1 (:1) () K K K K K K K K nmum Rato - Poston s 5 & 6 < 1000 < 1500 < 1800 K03 - K08 All All All K09 All 11:1 14:1 K10 11:1 20:1 25:1 K12 - K18 16:1 32:1 36:1
97 RATINGS Key: Pm= Input Power (kw) 2= () = Exact Rato n2= () Fra = load (kn) n1 = 1450 n1 = 960 n1 = 2900 n1 = 725 n n2 2 Pm Fra n2 2 Pm Fra n2 2 Pm Fra n2 2 Pm Fra K K C C C C C C C C C C C C C C C C C C K Note: Input power Pm may exceed thermal power ratng 93
98 RATINGS Key: Pm= Input Power (kw) 2= () = Exact Rato n2= () Fra = load (kn) n1 = 1450 n1 = 960 n1 = 2900 n1 = 725 n n2 2 Pm Fra n2 2 Pm Fra n2 2 Pm Fra n2 2 Pm Fra K C C C C C C C C C C C C C C C C C C K K C C C Note: Input power Pm may exceed thermal power ratng 94
99 RATINGS Key: Pm= Input Power (kw) 2= () = Exact Rato n2= () Fra = load (kn) n1 = 1450 n1 = 960 n1 = 2900 n1 = 725 n n2 2 Pm Fra n2 2 Pm Fra n2 2 Pm Fra n2 2 Pm Fra K C C C C C C C C C C C C C C C K K C C C C C C C C C C C C C C C C C C Note: Input power Pm may exceed thermal power ratng 95
100 RATINGS Key: Pm= Input Power (kw) 2= () = Exact Rato n2= () Fra = load (kn) n1 = 1450 n1 = 960 n1 = 2900 n1 = 725 n n2 2 Pm Fra n2 2 Pm Fra n2 2 Pm Fra n2 2 Pm Fra K K C C C C C C C C C C C C C C C C C C K Note: Input power Pm may exceed thermal power ratng 96
101 RATINGS Key: Pm= Input Power (kw) 2= () = Exact Rato n2= () Fra = load (kn) n1 = 1450 n1 = 960 n1 = 2900 n1 = 725 n n2 2 Pm Fra n2 2 Pm Fra n2 2 Pm Fra n2 2 Pm Fra K C C C C C C C C C C C C C C C C C C K K C Note: Input power Pm may exceed thermal power ratng 97
102 RATINGS Key: Pm= Input Power (kw) 2= () = Exact Rato n2= () Fra = load (kn) n1 = 1450 n1 = 960 n1 = 2900 n1 = 725 n n2 2 Pm Fra n2 2 Pm Fra n2 2 Pm Fra n2 2 Pm Fra K C C C C C C C C C C C C C C C C K K C C C C C C C C C C C C C C C C C Note: Input power Pm may exceed thermal power ratng 98
103 Key: Pm= Input Power (kw) 2= () = Exact Rato n2= () Fra = load (kn) n1 = 1450 n1 = 960 n1 = 2900 n1 = 725 n n2 2 Pm Fra n2 2 Pm Fra n2 2 Pm Fra n2 2 Pm Fra K K C C C C C C C C C C C C C C C C C K Note: Input power Pm may exceed thermal power ratng RATINGS 99
104 RATINGS Key: Pm= Input Power (kw) 2= () = Exact Rato n2= () Fra = load (kn) n1 = 1450 n1 = 960 n1 = 2900 n1 = 725 n n2 2 Pm Fra n2 2 Pm Fra n2 2 Pm Fra n2 2 Pm Fra K C C C C C C C C C C C C C C C C C K K C C C C C C C C Note: Input power Pm may exceed thermal power ratng 100
105 RATINGS Key: Pm= Input Power (kw) 2= () = Exact Rato n2= () Fra = load (kn) n1 = 1450 n1 = 960 n1 = 2900 n1 = 725 n n2 2 Pm Fra n2 2 Pm Fra n2 2 Pm Fra n2 2 Pm Fra K C C C C C C C C C K K C C C C C C C C C C C C C C C C C Note: Input power Pm may exceed thermal power ratng 101
106 DIENSIONS TRIPLE REDUCTION n0 q k L1 u1 t1 w7 o o z d1 f0 a3 b0 b2 a2 b1 f b n h1 S c m m1 m2 m3 L14 m L13 U v4 T s D a e h p3 a a2 a3 b b0 b1 b2 c e f f0 h h1 k n n0 o p3 q s w7 z K K K K K K K K K K K K d1 L1 L13 L14 t1 u1 D (H7) m m1 m2 m3 T U v4 K k X50 K k X55 K k X70 K k X70 K k X70 K k X80 K k X80 K k X80 K m X110 K m X110 K m X110 K m X
107 n0 u1 t1 w7 o o z L1 f0 b0 b2 h1 v2 v3 L14 L13 d1 p3 kc DIENSIONS QUINTUPLE REDUCTION q a3 a2 b1 f b n s m m1 m2 m3 m U v4 T s D a e h a a2 a3 b b0 b1 b2 c e f f0 h h1 k n n0 o p3 q s v2 v3 w7 z K K K K K K K K K K K K d1 L1 L13 L14 t1 u1 D (H7) m m1 m2 m3 T U v4 K k X50 K k X55 K k X70 K k X70 K k X70 K k X80 K k X80 K k X80 K k X110 K k X110 K k X110 K k X
108 FAN COOLED UNITS Column 10 Entry For reducer fan kt modules enter S n column 10 or f used n conjuncton wth a reducer backstop module kt Y Z CW rotaton CCW rotaton q Frb k Dmensons of Fan Cooled Unts q k L15 L15 Frb L16 L13 L16 L13 Shaft end detal as standard unt øb8 k L13 L15 L16 q K K B A Frb K K K K K K q k1 104 kh k0
109 The reducer unts lsted below can be ftted wth an nternal backstop, ths has no effect of the external unt sze. The backstop devce ncorporates hgh qualty centrfugal lft off sprags whch are wear free above the lft off speed (n mn). To ensure correct operaton nput speed must exceed lft off speed. Sutable for ambent temperature -40 o C to + 50 o C REDUCER BACKSTOP ODULE Column 10 Entry For reducer backstop modules enter: W for CCW rotaton (or Z f used n conjuncton wth a fan kt) X for CW rotaton (or Y f used n conjuncton wth a fan kt) Lft off ( n mn) (at nputshaft) (rev/mn) Rated Lockng ( T max ) (at nputshaft) () K K K K K K K K K K Rotaton of outputshaft must be specfed when orderng as vewed from the outputshaft end (as shown n the dagram) CW - Free Rotaton - Clockwse Locked - Antclockwse AC - Free Rotaton - Antclockwse Locked - Clockwse CW 105
110 Sngle Extended w7 o1 DIENSIONS OUTPUTSHAFT / SHRINK DISK Double Extended L L2 L2 o1 o1 a L12 L11 L21 L22 L22 a t t2 L21 u u2 Od Od2 Od2 a d d2 L L11 L12 L2 L21 L22 o1 t t2 u u2 w7 K k6 25 k K k6 30 k K k6 35 k K k6 40 g K k6 50 g K m6 60 g K m6 70 g K m6 75 m K m6 95 m K m6 120 m K m6 160 m K m6 190 m Shrnk Dsk o m5 o3 m4 Tq z o w8 Od (h6) Od7 OD OD +0.5 OD1 Og4 m7 Od1-0.3 m6 Od1 (h6) R1 D D1 d (h6) d1 (h6) d7 g4 m4 m5 m6 m7 o o3 w8 z Tq() K K K K K K K K K K K K
111 TORQUE AR & OUTPUT FLANGE P a4 a4 a4 d1 G L1 L2 P R K K K K K K K K K K K K R R Os1 Os1 Od1 Od1 G L2 G L2 L1 L1 o o o1 o1 o3 o3 f1 f1 m m h h Oe1 Oe1 u u t t Od Od L L L12 L12 c1 c1 Ob1 Ob1 Oa1 L11 L11 Oa1 a1 b1 c1 d e1 f1 h L L11 L12 m o o1 o3 s1 t u K j k (x4) 28 8 K j k (x4) 33 8 K j k (x4) K j k (x4) K j k (x4) K h m (x4) K h m (x8) K h m (x8) K h m (x8) K h m (x8) K h m (x8) K h m (x8)
112 DIENSIONS C (B14) FLANGE K03 K04 K08 OQ K05 K06 K07 45 Oe F7 K09 K10 K12 f o2 o2 F O r O R K15 K16 K K03 - K07 K08 - K e5 F7 o2 Q r (h7) R (H7) f F K x K x K x K x K x K x K x K x K x K x K x K x
113 DIENSIONS STANDARD BORE ASSEBLY Assembly Onto Shaft - Customers Shaft Detal T L2 L L1 R U u1 m Od Oda Od L3 L4 L5 K03 K04 K05 K06 K07 K08 K09 K10 K12 K15 K16 K18 d da L L1 L2 L3 L4 L5 m N R T U u / x1.5x R / R / x1.75x R / R / x2x R / R / x2x R / R / x2x R / R / x2.5x R / R / x2.5x R / R / x2.5x R / R / x3x R / R / x3x R / R / x3.5x R / R / x3.5x R / R Assembly Instructons 1. Spray the hollow shaft bore and matng dameter of the output shaft wth Rocol DFS or equvalent ant-scuffng spray. 2. Ft key nto shaft. 3. Ft the crclp nto the output sleeve. 4. Ft the spacer tube only f the output shaft has no shoulder, then ft the output shaft nto the output sleeve. 5. Secure n place wth the washer and bolt. tghten to the values stated n column N of the above table. 109
114 Dsassembly ethod from Shaft DIENSIONS STANDARD BORE DISASSEBLY c4 OD Od3 c5 m1 m c6 t Od4 m1 Od3 L2 Od2 u c7 c4 c5 c6 c7 D d2 d3 d4 L2 m m1 t u K x K x K x K x K x K x K x K x K x K x K x K x
115 SHIPPING SPECIFICATION Weght of Basemounted Unts () Unt sze & no of reductons K0332 K0352 K0432 K0452 K0532 K0552 K0632 K0652 K0732 K0752 K0832 K0852 K0932 K0952 K1032 K1052 K1232 K1252 K1532 K1552 K1632 K1652 K1832 K1852 otorsed Reducer verson shaft flange Wthout otor 63 Wth otor Wthout otor 71 Wth otor Wthout otor 80 Wth otor Wthout otor 90S Wth otor Wthout otor 90L Wth otor Wthout otor 100L Wth otor Wthout otor 112 Wth otor Wthout otor 132S Wth otor Wthout otor 132 Wth otor Wthout otor 160 Wth otor Wthout otor 160L Wth otor Wthout otor 180 Wth otor Wthout otor 180L Wth otor Wthout otor 200L Wth otor Wthout otor 225S Wth otor Wthout otor 225 Wth otor Wthout otor 250 Wth otor Wthout otor 280S Wth otor Wthout otor 280 Wth otor Wthout otor 315S Wth otor Wthout otor 315 Wth otor Wthout otor 315 Wth otor All weghts exclude lubrcant and are for standard shaft mount unts, for flange or mount unts add weght of flange / shaft (shown at top of table) to the fgures shown above 111
116 CONTACT US AUSTRALIA DENARK SWEDEN & NORWAY UNITED KINGDO Radcon Transmsson (Australa) PTY Ltd Australa Tel: Benzler Transmsson A/S Dalager 1 DK-2605 Brøndby, Denmark Tel: Fax: AB Benzlers Porfyrgatan Helsngborg Sweden Tel: Fax: Radcon Transmsson UK Ltd Unt J3 Lowfelds Busness Park, Lowfelds Way, Elland West Yorkshre, HX5 9DA Tel: Fax: EUROPE FINLAND THAILAND USA Benzler TBA BV Jachthavenweg 2 NL-5928 NT Venlo Germany Tel: Fax: Italy Tel: Netherlands & the rest of Europe Tel: Fax: Oy Benzler AB Vanha Talvte 3C FI Helsngfors, Fnland Tel: Fax: Radcon Transmsson (Thaland) Ltd 700/43 oo 6 Amata Nakorn Industral Estate Tumbol Klongtumru uang, Chonbur Thaland Tel: Fax: Radcon Drve Systems, Inc Alft Lane Elgn Chcago Illnos USA Tel: Fax: INDIA Elecon. Engneerng Company Ltd. Anand Sojtra Road Vallabh Vdyanagar Gujarat Inda Tel:
117 Benzlers Denmark Fnland Germany Italy Sweden The Netherlands Radcon Thaland Unted Kngdom USA
SERIES M CONTENTS
C-3.01INP0316 SERIES CONTENTS General Descrpton Unt Desgnaton Explanaton And Use Of Ratngs And Servce s Classfcaton By Applcatons Selecton Procedure For otorsed Unts Unt Versons Shaft Optons otor Adaptors
More informationSERIES K CONTENTS PAGE
CONTENTS PAGE General Descrpton 1 Unt Desgnaton 2 Explanaton And Use Of Ratngs And s 3 Classfcaton By Applcatons 4 Selecton Procedure For sed Unts 5-6 Optons 7-8 Adapters 9-10 Lubrcaton 11 ountng Posstons
More informationF Series Shaft Mounted Gear Units
F Seres Shaft ounted Gear Unts Superor Gear Technology ATEX Complance Assured Total complance wth the ATEX Drectve safeguardng the use of ndustral equpment n potentally explosve atmospheres s assured for
More informationSeries M Helical In Line Technical Up to 90 kw/11,000 Nm Geared Motors
www.pbl.co.n Seres Helcal In Lne Techncal Up to 90 kw/11,000 Geared otors SERIES PRODUCTS IN THE RANGE Servng an entre spectrum of mechancal drve applcatons from food, energy, mnng and metal; to automotve,
More informationSeries M Helical In-Line
Seres Helcal In-Lne Techncal Up to - 90 Kw / 11,000 Nm Geared otors C-2.00GB1211 PRODUCTS IN THE RANGE Servng an entre spectrum of mechancal drve applcatons from food, energy, mnng and metal; to automotve,
More informationSeries K Helical Bevel
Seres K Helcal Bevel Techncal Up to - 90 kw / 12,300 Nm Geared otors CK-2.00GB1211 ATEX Complance Assured Total complance wth the ATEX Drectve safeguardng the use of ndustral equpment n potentally explosve
More informationSeries C Helical Worm
Seres C Helcal Worm Techncal p to - 45 Kw / 10,000 Nm Geared otors CC-2.01GB0 1 PRODCTS IN THE RANGE Seres A Worm Gear unts and geared motors n sngle & double reducton types Seres BD Screwjack worm gear
More informationSeries M Helical In Line
Engneered around you www.davdbrown.com Seres Helcal In Lne Techncal Up to - 90kW / 110,000 Gear otors C-1.02GBD1009 Каталог мотор-редукторов SERIES Davd Brown / Benzlers Radcon Servng an entre spectrum
More informationSeries C Helical Worm
Seres C Helcal Worm Techncal Up to - 45kW / 10,000 Nm Geared otors CC-2.00GB1211 PRODUCTS IN THE RANGE Servng an entre spectrum of mechancal drve applcatons from food, energy, mnng and metal; to automotve,
More informationSeries K Helical Bevel
Seres K elcal Bevel Techncal p to - 160 kw / 50,000 Nm Geared otors CK-3.00GB0813 ATEX Complance Assured Total complance wth the ATEX Drectve safeguardng the use of ndustral equpment n potentally explosve
More informationSeries K Helical Bevel
Seres K elcal Bevel Techncal p to - 120 P / 109,000 lb.n Geared otors CK-2.00S1211 PRODCTS IN TE RANGE Servng an entre spectrum of mechancal drve applcatons from food, energy, mnng and metal; to automotve,
More informationSeries K Helical Bevel
www.radcon.com Seres K elcal Bevel Techncal p to - 90kW / 12,300 Nm Gear otors CK-1.02GBD0111 PRODCTS IN TE RANGE Servng an entre spectrum of mechancal drve applcatons from food, energy, mnng and metal;
More informationCompact Motor Geared Motors
Compact Geared s Compact CIM-2.01GB0914 PRODUCTS IN THE RANGE Servng an entre spectrum of mechancal drve applcatons from food, energy, mnng and metal; to automotve, aerospace and marne propulson, we are
More informationSeries K (Helical Bevel) CK-1.01GBD0308. Technical Up to - 90 kw / 12,300 Nm GEAR MOTORS.
CK-1.01GBD0308 Seres K (elcal Bevel) Techncal p to - 90 kw / 12,300 Nm GEAR OTORS www.davdbrown.com PRODCTS IN TE RANGE Servng an entre spectrum of mechancal drve applcatons from food, energy, mnng and
More informationSeries C Helical Worm
Series C Helical Worm Technical p to - 45 Kw / 10,000 Nm Geared otors CC-2.01GB0914 PRODCTS IN THE RANGE Series A Worm Gear units and geared motors in single & double reduction types Series BD Screwjack
More informationSERIES C PRODUCTS IN THE RANGE
Seres C 0403 PRODUCTS IN THE RANGE Servng an entre spectrum of mechancal drve applcatons from food, energy, mnng and metal; to automotve, aerospace and marne propulson, Textron Power Transmsson s here
More informationPRODUCTS IN THE RANGE
Seres K CAT.K05 PRODCTS IN TE RANGE 0105 Servng an entre spectrum of mechancal drve applcatons from food, energy, mnng and metal; to automotve, aerospace and marne propulson, Textron Power Transmsson s
More informationSeries C Helical Worm
Seres C elcal Worm Techncal p to - 60 P / 89,000 lb.n Geared otors CC-2.00S1211 PRODCTS IN TE RANGE Servng an entre spectrum of mechancal drve applcatons from food, energy, mnng and metal; to automotve,
More informationSeries F Shaft Mounted Helical
Series F Shaft ounted Helical Technical Up to - 110 kw / 16,500 Nm Geared otors CF-2.01GB1 ATEX Compliance Assured Total compliance with the ATEX Directive safeguarding the use of industrial equipment
More informationPRODUCTS IN THE RANGE
Seres 0311 PRODUCTS IN THE RANGE Servng an entre spectrum of mechancal drve applcatons from food, energy, mnng and metal; to automotve, aerospace and marne propulson, Textron Power Transmsson s here to
More informationGeneral Description 2. Unit Designations 3. Explanation and use of Ratings and Service Factors 4. Load Classification by Applications 5
CONTENTS General Description 2 nit Designations 3 Explanation and use of Ratings and Service Factors 4 Load Classification by Applications 5 Selection Procedure 6-7 Options 8-9 otor Adaptors 10-12 Lubrication
More informationSeries F Shaft Mounted Geared Motor- Version 3
Series F Shaft ounted Geared otor- Version 3 Technical p to - 45kW/ 8000 Nm Geared otor CF3.01-GBD-0 18 PRODCTS IN TE RANGE Series A Worm Gear units and geared motors in single & double reduction types
More informationSeries P Planetary. Technical Up to - 90kW / 65000Nm. Planetary CP-2.00GB0 1
VARIMAX AG, Antriebstechnik, Normannenstrasse 14, Postfach 762, CH-3018 Bern Tel. +41 (0)31 990 00 70 e-mail info@varimax.ch Fax +41 (0)31 990 00 71 web www.varimax.ch Series P Planetary Technical Up to
More informationSeries C Helical Worm
Series C elical Worm Technical p to - 60 P / 89,000 lb.in Geared otors CC- S03 8 PRODCTS IN TE RANGE Serving an entire spectrum of mechanical drive applications from food, energy, mining and metal; to
More informationProduct Information. Universal swivel vane RM-W
Product Informaton RM-W RM-W Modular. Compact. Flexble. RM-W swvel vane wth hgh torque for fast swvelng tasks Feld of applcaton To be used n clean to slghtly drty envronments such as assembly or packagng
More informationStromag. Electromagnetic Fail Safe Brakes Series NFA/NFF. Versions: Basic & Dockside Cranes. Stromag Limited
Stromag Electromagnetc Fal Safe Brakes Seres NFA/NFF Versons: Basc & Docksde Cranes Stromag Lmted 29 Wellngborough Road,Rushden Northamptonshre NN10 9YE Unted Kngdom Tel. 01933 350407 Fax. 01933 358692
More informationSize 1120, Bore Ø0.75" Size 1320, Bore Ø1.25" Size 1420, Bore Ø1.375" 3/4HP. Size 1320, Bore Ø1.25" Size 1320, Bore Ø1.25" Size 1633, Bore Ø2.
Product Range Hollow Shaft Type Selections shaded in blue offer an increased service factor. Please refer to the gearmotor selection tables for specific unit service factor details. Nominal Ratio (:1)
More informationProduct Information. Universal swivel finger GFS
Product Informaton GFS GFS Productve. Flexble. Compact. GFS unversal rotary fnger Rotary fnger for turnng workpeces that are held by a grpper or can also be used as a specal swvel unt. Feld of applcaton
More informationProduct Information. Miniature swivel Head SKE
Product Informaton SKE SKE Compact. Fast. Productve. SKE mnature swvel head 90 swvel head wth sngle pston drve Feld of applcaton For use n clean envronments such as assembly or packagng zones and for lght
More informationZ-50-S Standing Spindle 50 kn
Z-50-S Standng Spndle 50 kn Safety Safety nut nut New: Spndle lubrcaton durng operaton Ths page Secton.29 Secton.27 M12/16 deep 52J7/ deep M10/15 deep SRO Length M12/16 deep Fttng heght Y Overall heght
More informationIPV High-pressure Internal Gear Pumps Technical Data Sheet
IV Hgh-pressure Internal ear umps Techncal Data Sheet Functon 1 7 5 9 2 10 8 2 1 9 4a 4b 3 1 non shaft 2 Internal gear 3 Fller pn 4a Fller segment carrer 4b Fller sealng segment 5 Axal dsc Axal pressure
More informationHelical geared motors SERIES
H SERIES Informaton Contents Symbols... Modularty... Desgn features... Product selecton gude... Servce factor... Crtcal applcatons... Thermal power... Installaton... Motor mountng wth PAM flange... Overhung
More informationHELICALBEVEL GEAREDMOTORS
B / IEC / STD / EN / REV.0 / 2017 HELICALBEVEL GEAREDMOTORS STANDARD IEC B Seres / Standard / IEC INDEX 1. GENERAL INFORMATION 1.1 SYMBOLS AND FORMULAS 4 1.1.1 Symbols 4 1.1.2 Formulas 5 1.2 PRODUCT SELECTION
More informationSpeed Reducers and Gearmotors
and Gearmotors Table of Contents 1. General Information 2. How to Select...2.2 Configure a Model Number (Nomenclature)...2.4 AGMA Load Classifications...2.6...2.8 Single Reduction,,, Y3, Y5,...2.8 Single
More informationSeries F Shaft Mounted Helical
Series F Shaft ounted elical Technical p to - 150 P / 146,000 lb.in Geared otors CF- S 11 PRODCTS IN TE RANGE Serving an entire spectrum of mechanical drive applications from food, energy, mining and metal;
More informationMounting and Operating Instructions Bevel Gearboxes KEK
Mountng and Operatng Instructons Bevel Gearboxes KEK Responsble MÄDLER branches accordng to German Post Code Areas: For Swtzerland: PCA 1, 2 and 3 PCA 0, 4 und 5 PCA, 7, 8 und 9 MÄDLER Norm-Antreb AG Subsdary
More informationLoadable. Flexible. Robust. Universal Rotary Unit PR
PR Electrcal Rotary Unts Unversal Rotary Unt Loadable. Flexble. Robust. Unversal Rotary Unt PR Servo-electrc rotary unt wth angle > 360, precson gear and ntegrated electroncs Feld of Applcaton All-purpose,
More informationProducts in the range
WORM GEAR UNITS & GEAR MOTORS SERIES V Products n the range Servng a great qualty and hgh effcency of gear drves, transmsson components, electrc motors, varable speed drves, startng and stoppng assstng
More informationVacuum supply, overview
64 Vacuum supply Vacuum supply, overvew Vacuum unts Modular vacuum unts ompact vacuum unts Vacuum workstatons Vacuum pumps Lqud rng pumps Vacuum supply 65 Vacuum Supply Pumps Unts Workstatons pplcaton
More informationProduct Information. Angular parallel gripper GAP
Product Informaton GAP GAP More flexble Productve. Narrower. GAP angular parallel grpper 2-fnger angular parallel grpper wth grpper fnger actuaton of up to 90 degrees per jaw Feld of applcaton Grppng and
More informationGEARED VANE AIR MOTORS. Type Ratio Version Output shaft Torque arm Optins
2 TECHNICAL FEATURES The man features of worm gearboxes used are: Alumnum housng Double taper roller bearng on sze 090 and 110. Permanent synthetc ol long-lfe lubrcaton Desgnaton GEARED VANE AIR MOTORS
More informationTECHNICAL CATALOGUE GEAREDMOTORS STANDARD IEC DIRECTIVE ATEX
HELICALBEVEL GEAREDMOTORS STANDARD IEC DIRECTIVE ATEX B Seres / ATEX / IEC INDEX 1. GENERAL INFORMATION 1.1 ATEX 4 1.2 SYMBOLS AND FORMULAS 5 1.2.1 Symbols 5 1.2.2 Formulas 6 1.3 PRODUCT SELECTION 7 1.4
More informationPower Transmission Products. Maurey Couplings. Hi-Flex Tire Couplings Hi-Q Jaw Couplings Finished Bore Sleeve Couplings Rigid Bushed Sleeve Couplings
Power Transmission Products Maurey Couplings Hi-Flex Tire Couplings Hi-Q Jaw Couplings Finished Bore Sleeve Couplings Rigid Bushed Sleeve Couplings Hi-Q Flexible Couplings R to enable full power transmission
More informationTECHNICAL CATALOGUE H / IEC / STD / EN / REV.0 / 2017 HELICAL GEAREDMOTORS STANDARD IEC
H / IEC / STD / EN / REV.0 / 2017 HELICAL GEAREDMOTORS STANDARD IEC H Seres / Standard / IEC INDEX 1. GENERAL INFORMATION 1.1 SYMBOLS AND FORMULAS 4 1.1.1 Symbols 4 1.1.2 Formulas 5 1.2 PRODUCT SELECTION
More informationCatalog April Metric Motorized Torque-Arm II Technical catalog
Catalog April 2015 Metric Motorized Torque-Arm II Technical catalog With expertise, and a comprehensive portfolio of products and life-cycle services, we help value-minded industrial customers improve
More informationTECHNICAL CATALOGUE H / IEC / ATEX / EN / REV.1 / 2017 HELICAL GEAREDMOTORS STANDARD IEC DIRECTIVE ATEX
H / IEC / ATEX / EN / REV.1 / 2017 HELICAL GEAREDMOTORS STANDARD IEC DIRECTIVE ATEX H Seres / ATEX / IEC INDEX 1. GENERAL INFORMATION 1.1 ATEX 4 1.2 SYMBOLS AND FORMULAS 5 1.2.1 Symbols 5 1.2.2 Formulas
More informationTECHNICAL CATALOGUE VSF / IEC / STD / EN / REV.0 / 2017 WORM GEAREDMOTORS STANDARD IEC
VSF / IEC / STD / EN / REV.0 / 2017 WORM GEAREDMOTORS STANDARD IEC INDEX 1. GENERAL INFORMATION 1.1 SYMBOLS AND FORMULAS 5 1.1.1 Symbols 5 1.1.2 Formulas 6 1.2 PRODUCT SELECTION 7 1.3 SERVICE FACTOR 8
More informationFALK SERIES AFX & AFH GEAR DRIVES Low Speed Shaft Solid or Hollow Up, Down, or Horizontal
Falk Series AF Right-Angle Gear Drives Solid or Hollow Output, Up, Down or Horizontal (English-nch) FALK SERES AFX & AFH GEAR DRVES Low Speed Shaft Solid or Hollow Up, Down, or Horizontal Helical Gears
More informationWorm gear reducers and Worm geared motors VSF SERIES NMRV
VSF SERIES Worm gear reducers and Worm geared motors NMRV Contents Symbols... Specfcaton... Modularty... Servce factor... Crtcal applcatons... Installaton... Overhung load ()... Moments of nerta... Lubrcaton...
More informationOperating Instructions Pneumatic drives
Operatng Instructons Pneumatc drves Pneumatc drves Equpment characterstcs Poston ndcator (detachable)! Settng screw for pvot angle 1 4 5 Ar nterface accordng to VDI / VDE 3845 (Namur) Advantages of the
More informationCyclo Speed Reducers CATALOG
Cyclo 6000 CATALOG 03.601.50.005 Cyclo 6000 Superior design, powerful performance The Cyclo 6000 is also available as an inline Gearmotor To request a catalog, or for more information on any of our high
More informationSource: Holmes Place 142
142 Source: Holmes Place Mandatory program: flter backwash Your flter ensures a mechancal cleanng of the water from coarse mpurtes (drt, har, skn partcles, etc.) and a recrculaton of the pool water by
More informationProduct Information. Compact linear module ELP
Product Informaton ELP ELP Easy. Fast. Relable. ELP compact lnear module Electrc lnear module wth drect drve and ntegrated controller, scope-free guded usng pre-loaded roller gude Feld of applcaton For
More informationProduct Information. Gripper for small components KGG 60
Product Informaton KGG More compact. More flexble Narrower. KGG grpper for small components narrow 2-fnger parallel grpper wth long stroke Feld of applcaton for unversal use n clean envronments wth lght
More informationProduct Information. Radial gripper DRG
Product Informaton Radal grpper DRG DRG Radal grpper Fully encapsulated. Narrower. More flexble DRG sealed grpper Sealed 180 angular grpper for the use n contamnated envronments Feld of applcaton For applcatons
More informationSpeed Reducers. Speed Reducers. Speed Reducers. How to. Select. Cyclo HBB. Speed Reducers 2.1
2 How to Select 2.1 How to select a Reducer Step 1: Step 2: Step 3: Collect data about your application Before starting you need to know the: Application (e.g. Conveyor, Mixer, etc.) Hours of Operation
More information102 ALUFIX CLAMPING ELEMENTS
102 103 ALUFIX CLASSIC Clampng Elements Alufx clampng elements fx workpeces to fxtures and ensure contact wth support surfaces 104 ØB ØA 3 Jaw Keyless Chuck for measurng applcatons D C Nr. A B C D 82220
More informationProduct Information. Radial gripper PRG 64
Product Informaton PRG 64 PRG More flexble More powerful. Slm. PRG unversal grpper 180 radal grpper wth powerful 1-shft slotted lnk gear and oval pston. Feld of applcaton For areas of applcaton whch, n
More informationOperating Manual for the Battery Powered Hydraulic Pump Kit READ THIS FIRST! customer manual TOOLING ASSISTANCE CENTER
Operatng Manual for the Battery Powered Hydraulc Pump Kt Customer Manual 409-10094 2063680-1 05 JAN 12 SAFETY PRECAUTIONS READ THIS FIRST!............................ 2 customer manual 1. INTRODUCTION.......................................................
More informationCYCLO 6000 Gearmotors. How to Select. How to. Select. Cyclo 6000 Series. How to Select 2.1
2 How to Select How to Select Cyclo 6000 Series How to Select 2.1 How to Select a Gearmotor Step 1: Step 2: Collect data about your application Before starting you need to know the: (e.g. Conveyor, Mixer,
More informationHyponic. Hypoid Right Angle Gearmotor and Reducer CATALOG
Hypoid Right Angle Gearmotor and Reducer CATALOG 12.001.50.005 Hypoid Right Angle Patented, High-Performance Gearmotors and Reducers Featuring All-Steel Hypoid Gearing U. S. PAT. NO. 5,203,231; U.S. PAT.
More informationProduct Information. Gripper for small components MPZ 30
Product Informaton MPZ Precse. Compact. Relable. MPZ grpper for small components Small 3-fnger centrc grpper wth base jaws guded on T-slots Feld of applcaton for unversal use n clean to slghtly drty workng
More informationCall Joseph Industries Today for all your Genuine Carraro Spare Part Needs
Fnal Drves Authorzed Dstrbutor (P): 0--993 (F): 3--39 Call Joseph Industres Today for all your Genune Carraro Spare Part Needs www.joseph.com sales@joseph.com O&K Antrebstechnk Drves and gearboxes for
More informationCONTENTS MAXUM Concentric Reducers
CONTENTS s Features/Benefits.............................................. G3-2 Specifications................................................. G3-4 How to Order.................................................
More informationProduct Information. Long-stroke gripper PZH-plus
Product Informaton Long-stroke grpper PZH-plus PZH-plus Long-stroke grpper Flexble. Robust. Flat. PZH-plus unversal grpper Unversal grpper wth long travel and hgh maxmum moment due to mult-tooth gudance
More informationEngineering Information
Engineering nformation HOW TO FGURE HORSEPOWER AND TORQUE To Obtain Having Formula Velocity (V) Feet Per Minute Pitch Diameter (D) of Gear or sprocket nches V = 2618 x D x RPM & Rev. Per Min. (RPM) Velocity
More informationGeneral Description. Construction
Sheet 0 General Descrpton.- MEB Metal-Enclosed Drawout General Descrpton Eaton s Cutler-Hammer MEB (Metal- Enclosed ) conssts of a sngle hgh drawout vacuum crcut breaker (Type VCP-W) n a metal-enclosed
More informationRing and Spade Terminals
J Rng and Spade Termnals Applcaton Specfcaton 114-2084 25 J J AN All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n mllmeters [and nches]. Unless otherwse specfed,
More informationAir Driven Hydraulic Pumps
XA-Seres Ar Drven Hydraulc Pumps The breakthrough n hydraulc pump technology & ergonomcs. 700 bar pumps wth XVARI Technology, exclusvely from Enerpac! Ergonomc desgn for less operator fatgue Varable ol
More informationTECHNICAL ENQUIRY SPECIFICATION OF BATTERY OPERATED PALLET TRUCK
BHEL ~.BANGALORE TECHNCAL ENQURY SPECFCATON OF BATTERY OPERATED PALLET TRUCK TRUPAT TRUMALA DEVASTHANA, TTD PALLET..o1 TECHNCAL SPECFCATONS OF BATTERY OPERATED PALLET TRUCK V. Sahadevan ssued by: BGA Oate:
More informationHOME SAFES CERTIFIED UNI EN 14450, GRADE S2
HOME SAFES CERTIFIED UNI EN 14450, GRADE S2 SAFEGUARDING YOUR SECURITY HOME SAFES Mottura products have always been desgned and manufactured wth the most strngent qualty control requstes, wth rgorous producton
More informationGear Coupling. Applications
Gear Coupling Applications Power Transformation Print & Paper Industries Gear Boxes Textile Industries Conveyors Pumps Compressors Process, Chemical & Pharmaceutical Industries Nylon Gear Couplings Nylon
More informationSpeed Reducers and Gearmotors featuring Keyless Taper-Grip Bushing
Cyclo BBB BEVEL BUDDYBOX Speed Reducers and Gearmotors featuring Keyless Taper-Grip Bushing CATALOG 13.601.50.006 Cyclo BBB Bevel Buddybox Rugged Spiral Bevel Output Modular Cyclo Input Compact Size Ring
More informationMetal-Enclosed Switchgear MEB & MSB Medium Voltage Switch and Fixed Mounted Vacuum Breakers (MSB) MSB Metal-Enclosed Switch and Vacuum Breaker
June 0 Sheet 0 Metal-Enclosed Swtchgear MEB & MSB Medum Voltage Swtch and Fxed Mounted Vacuum s (MSB) General Descrpton.- MSB Metal-Enclosed Swtch and Vacuum General Descrpton Eaton s Cutler-Hammer assembly
More informationFalk Ultramite UC Helical Concentric Gear Drives
Gear Catalog Download the most up-to-date versions at www.rexnord.com Falk Ultramite UC Helical Concentric Gear s (Inch) Falk Ultramite UC Helical Concentric Gear To learn more about the Falk Ultramite
More informationInstallation, Operation and Warranty Information Micro Annular Gear Pump MODEL 7205
Installaton, Operaton and Warranty Informaton Mcro Annular Gear Pump MODEL 7205 1402 NE 136 th Ave. Vancouver, WA 98684 (360) 253-2008 telephone (360) 253-8294 fax Info.mcropump@dexcorp.com www.mcropump.com
More informationEMC3300 ELECTRO-MECHANICAL CRIMP TOOL
Descrpton The EMC3300 Electro-Mechancal Crmp Tool s a handheld, self contaned crmp tool ntended to crmp contacts/termnals onto copper and alumnum cable. KEEP THIS MANUAL Important Safety Informaton Safety
More informationUniversal Joints. In This Section: D Type HD Type D Type Stainless NB (Needle Bearing) Type LOJ Type DD and DDX Type Universal Joint Boots
JW Universal Joints In This Section: D Type HD Type D Type Stainless NB (Needle Bearing) Type LOJ Type DD and DDX Type Universal Joint Boots www.lovejoy-inc.com 329-1 JW Universal Joints Safety Warning
More informationCatalog. MagnaGear XTR gear reducers Gearing
Catalog MagnaGear XTR gear reducers Gearing We provide motors, generators and mechanical power transmission products, services and expertise to improve customers' processes and optimize the total cost
More informationRXC. traction drives. When an ordinary drive falls short... Featuring an all metal power train and optional advanced electronic control capabilities
RXC traction drives Featuring an all metal power train and optional advanced electronic control capabilities When an ordinary drive falls short... Ring Cone Adjustable Speed Traction Drives Control Ring
More informationSPECIFICATION HOW TO ORDER QUANTIS QUANTIS
The DODGE speed reducer is suitable for c-face, separate, or integral gearmotor construction in either foot or output flange mountings, and available in single, double or triple ratios. The DODGE RHB and
More informationMaxum XTR Concentric reducers catalog
MECHANICAL POWER TRANSMISSION Maxum XTR Concentric reducers catalog Maxum XTR Concentric reducers catalog To receive a copy of the Dodge Maxum XTR Catalog, Dodge Bearing Engineering Catalog, Dodge Gearing
More informationProduct Information. Universal rotary unit ERS
Product Informaton Compact. Flexble. Fast. Electrcal rotary unt wth torque motor and angle of rotaton > 360 as well as the pneumatc holdng brake and rotary feed-through optons, and f desred ncreased protecton
More informationPanel & Drywall Lifting Material Transport Door Installation Overhead Drilling
MATERIAL HANDLING SOLUTIONS Panel & Drywall Lftng Materal Transport Door Installaton Overhead Drllng Access Platform Sales (APS) offers a range of manual handlng solutons desgned to move materals safely
More informationFlange Flexible Couplings.
Flange Flexible Couplings Coupling Selection Coupling Selection How to Select Standard Selection The Standard Selection may be used for engine driven, motor, or turbine applications. The following information
More informationGripping force, O.D. gripping. Gripping force, I.D. gripping
Grppng force, O.D. grppng Fnger load Grppng force Grppng force, I.D. grppng Grppng force Fnger length M x max. 40 Nm M y max. 60 Nm M z max. 40 Nm F z max. 1100 N Fnger length The ndcated moments and forces
More informationStandard Modular System 2013
antrebstechnk Standard odular System 23 t s tme for tomorrow Standard odular System 23 ur standard modular system offers rapd and practcal solutons for your drve requrements - ether wth regard to the basc
More informationR 1000 Modular shelving system
MODULAR SHELVING SYSTEMS GALVANISED LIGHT GREY RAL 7035 RAL 7035 R 1000 Modular shelvng system The advantages of modular shelvng from SSI SCHAEFER are mpressve: Closed sold sde panels prevent stored goods
More informationCyclo BBBBEVEL BUDDYBOX
Cyclo BBBBEVEL BUDDYBOX Speed Reducers and Gearmotors featuring Keyless Taper-Grip Bushing CATALOG 13.601.50.003 Cyclo BBB BEVEL BUDDYBOX Speed Reducers and Gearmotors featuring Keyless Taper-Grip Bushing
More informationREED 3050HP CONCRETE PARTS INFORMATION, WARRANTY & SERVICE
REED 3050HP CONCRETE PUMP SECTON 0: PARTS NFORMATON, WARRANTY & SERVCE PAGE FRAME & AXLE ASSEMBLY CONTROL PANEL 3 POWER TRAN ASSEMBLY 4 HYDRAULC VALVES 5 MAN HYDRAULC PUMP AREA 6 HYDRAULC PUMP - Sauer-Sundstrand
More informationwww. ElectricalPartManuals. com INSTRUCTIONS PNEUMATIC TIMING RELAYS DESCRIPTION MAINTENANCE OPERATION Type AM With or without Auxiliary Switch Units
FG.. DESCRPTON OPERATON MANTENANCE NSTRUCTONS Type AM Relay Wth One Auxlary Swtch Unt TYPE AM PNEUMATC TMNG RELAYS are for general use where t s desred to open or close electrcal crcuts followng a defnte
More informationALUFIX CLASSIC Starter Kits
162 ALUFIX BASIC SETS ALUFIX CLASSIC Starter Kts Fast clampng wth ALUFIX STARTER KIT A STARTER KIT B #83131 Screw clamp wth ball jont and foot plate max clampng wdth 25 mm extenson 100 mm #83132 Screw
More informationElectrical devices may only be mounted and connected by electrically skilled persons.
Art. No. : 1711DE Operatng nstructons 1 Safety nstructons Electrcal devces may only be mounted and connected by electrcally sklled persons. Serous njures, fre or property damage possble. Please read and
More informationFalk Type YB & GHB Horizontal Right Angle Gear Drives
Falk Series YB & GHB Gear Drives Proven Performance for Thermal Capacity Applications (English Inch) Falk Type YB & GHB Horizontal Right Angle Gear Drives Since 1897, Falk gear drives have benefitted from
More informationProduct Information. Universal intermediate jaw UZB
Product Informaton UZB UZB Flexble. Precse. Stable. UZB unversal ntermedate jaw The unversal ntermedate jaw allows fast tool-free and relable pluggng and shftng of top jaws at the grpper. Feld of applcaton
More informationFLEXIBLE JAW COUPLINGS
To order this part, call Lifco Hydraulics USA Toll Free at -800-92-849 Jaw Type Couplings USA Standard The Jaw Type Couplings from Vescor are offered in the industry s largest variety of stock bore/keyway
More informationHyponic. Hypoid Right Angle Gearmotor and Reducer CATALOG
Hypoid Right Angle Gearmotor and Reducer CATALOG 12.001.50.007 Hypoid Right Angle Patented, High-Performance Gearmotors and Reducers Featuring All-Steel Hypoid Gearing U. S. PAT. NO. 5,203,231; U.S. PAT.
More informationSpecialty Couplings. Overview. Deltaflex Coupling Design Lovejoy offers maximum misalignment capacity with the Deltaflex coupling! SP-3.
Overview Deltaflex Coupling Design Lovejoy offers maximum misalignment capacity with the Deltaflex coupling! The Deltaflex coupling is the real solution to installation, misalignment, and performance problems.
More informationUNIBOX Series. Enclosures and wiring accessories IP40 - IP55
Enclosures and wrng accessores IP - IP55 ENCLOSURES AND WIRING ACCESSORIES IP - IP55 GENERAL DESCRIPTION enclosures are desgned to accomodate EVOLUTION Seres accessores and, wth specfc bearng adaptors,
More informationMobile fence. Road construction. Event. Mobile fence e. Building construction. Civil engineering. Storage equipment. Transport equipment
e 48 Urban Equpment Buldng Equpment Standard as barrer around constructon stes, moble fence pre-galvanzed, wth tubular frame all around, vertcal tubes Ø 42.4 mm, horzontal tubes Ø 26.9 mm, mesh sze: vertcal:
More information