TELESCOPIC SLIDES 2 beams

Transcription

1 12 Partial extension TELESCOPIC SLIDES 2 beams R20 STEEL R26 STEEL TECHNICAL EVOLUTION PLEASE CONTACT US TECHNICAL EVOLUTION PLEASE CONTACT US Example of application EQUIPMENT FOR KITCHEN TROLLEY: Slides allow an easier and successful access to the kitchen plates Closed length: 200 to 800 mm Standard 001 Load: 10 to 39 kg Options: Lock out No Zinc plating Lock in No Double extension No Closed length: 200 to 800 mm Standard 003 Load: 45 to 85 kg Options: Lock out No Zinc plating Lock in No Double extension No To select the 2 beams slides Load capacity (kg/pair) Available closed length (mm) Advice TO ORDER THE APPROPRIATE SLIDE Specify: Its reference (a reference corresponds to one specific type of slide: section, number of parts, material, treatment, stop ). Its closed length (which conditions the extension length). The required options and adaptations. Don t forget, if need be, to specify the conditions of use Think about the options and customization of the slides you will need Length Fixing Surface treatment Stops Locks Disconnect option

2 To order a slide with partial extension: R20 - R26 Blue zones indicate lengths available in stock. Other references are on request. Example Customisation of two beams slides R20 R26 Closed length L (mm) Extension D (mm) Load per pair (kg) Closed length L (mm) Extension D (mm) Load per pair (kg) Lock out Curved slide for machine tool guard Drilling scheme Technical specifications are given for your guidance. 13 CHAMBRELAN Catalogue Sliding system solutions Tel.: + 33 (0) Fax: + 33 (0)

3 14 Partial extension TELESCOPIC SLIDES 2 beams R28 STEEL D402 ALUMINIUM ST48 STAINLESS STEEL Closed length: 250 to 600 mm Standard 028 Load: 40 to 65 kg Options: Lock out No Zinc plating Lock in No Double extension 428 Closed length: 250 to 600 mm Standard 051 Load: 15 to 25 kg Options: Lock out 151 Protection: clear anodization Lock in 251 Lock out and in 351 Double extension 451 Closed length: 300 to 600 mm Standard 068 Load: 55 to 70 kg Options: Lock out No Lock in No Double extension No To select the 2 beams slides Load capacity (kg/pair) Available closed length (mm) Advice SPECIAL MOUNTING CHAMBRELAN slides have been designed and manufactured for standard use with a uniform load spread uniformly along the beams: Horizontal mounting in the major axis. Standard slides can not be used for applications such as vertical mounting (up and down), overhanging, excessive heat, corrosive environment, dust... Should you require the slide to be adapted for use in any of the above conditions, our design department is at your disposal.

4 To order a slide with partial extension: R28 - D402 - ST48 Blue zones indicate lengths available in stock. Other references are on request. Information Locking An optional locking device enables the slide to be held in the extreme position, either extended and/or closed. Simply activate the mobile part of the latch to allow the drawer to fold back. Three locking types are possible, i.e.: Lock in the open position Lock in the closed position Lock in the open and closed positions. R28 D402 ST48 Closed length L (mm) Extension D (mm) Load per pair (kg) Closed length L (mm) Extension D (mm) Load per pair (kg) Closed length L (mm) Extension D (mm) Load per pair (kg) Drilling scheme Technical specifications are given for your guidance. 15 CHAMBRELAN Catalogue Sliding system solutions Tel.: + 33 (0) Fax: + 33 (0)

5 16 Partial extension TELESCOPIC SLIDES 2 beams R53 STEEL R71 STEEL ST52 STAINLESS STEEL Closed length: 250 to 1000 mm Standard 009 Load: 65 to 130 kg Options: Lock out 109 Zinc plating Lock in 209 Lock out and in 309 Double extension 409 Closed length: 250 to 1000 mm Standard 005 Load: 170 to 320 kg Options: Lock out 105 Zinc plating Lock in 205 Lock out and in 305 Double extension 405 Closed length : 300 to 1000 mm Standard 067 Load : 50 to 120 kg Options: Lock out 167 Lock in 267 Lock out and in 367 Double extension 467 To select the 2 beams slides Load capacity (kg/pair) Available closed length (mm) Reminder Deflection 1 % of closed length Deflection is the non permanent deformation measured in mm s when the slides are loaded and fully extended. Our slides are recommended and tested to 1% of the closed length. This can be increased after consultation. Standard load capacity, with a uniform load spread evenly along the beams

6 To order a slide with partial extension: R53 - R71 - ST52 Blue zones indicate lengths available in stock. Other references are on request. Information HIGH TEMPERATURES CHAMBRELAN standard slides can be used up to 60 C. Beyond this temperature, adaptations can be made. Standard working temperatures of Chambrelan slides are between - 40 and R53 R71 ST52 Closed length L (mm) Extension D (mm) Load per pair (kg) Closed length L (mm) Extension D (mm) Load per pair (kg) Closed length L (mm) Extension D (mm) Load per pair (kg) Drilling scheme Technical specifications are given for your guidance. 17 CHAMBRELAN Catalogue Sliding system solutions Tel.: + 33 (0) Fax: + 33 (0)

7 18 Partial extension TELESCOPIC SLIDES 2 beams R82 STEEL R102 STEEL Closed length : 600 to 2000 mm Standard 006 Load: 185 to 510 kg Options: Lock out No Zinc plating Lock in 206 Double extension 406 To select the 2 beams slides Load capacity (kg/pair) Available closed length (mm) Closed length: 700 to 2000 mm Standard 007 Load: 300 to 1050 kg Options: Lock out No Zinc plating Lock in No Double extension 407

8 To order a slide with partial extension: R82 - R102 Blue zones indicate lengths available in stock. Other references are on request. R82 R102 Closed length L (mm) Extension D (mm) Load per pair (kg) Closed length L (mm) Extension D (mm) Load per pair (kg) Information End stop for intermediate load capacity Intermediate end stop for average load capacity or for standard used Shock absorbing spring on heavy duty slides Some end stops in aluminium slides can be used as a retainer in the closed position END STOPS CHAMBRELAN slides are fitted with stops which limit the extension, both for opening and closing. 3 types of end stops are available in chambrelan slides. Drilling scheme Technical specifications are given for your guidance. 19 CHAMBRELAN Catalogue Sliding system solutions Tel.: + 33 (0) Fax: + 33 (0)

9 Your partner in quality engineering products since 1986 Thank you for viewing product information on TEA s range of engineering components. Now please contact us at the nearest office to you for any further information, prices and availability: AUSTRALIA & New Zealand USA, South America & Canada T.E.A. Transmissions Pty Ltd T.E.A. Machine Components Inc. Tahiti Road 2281-F Dabney Road Tiaro Qld 4650 Richmond Virginia Australia USA Ph: 61-(0) Ph: Fax: 61-(0) Fax: sales@tea.net.au sales@teausa.net You are assured of prompt and efficient service at all time.