Screw Jack Systems MSZ Alu series
|
|
|
- Vivien Jennings
- 5 years ago
- Views:
Transcription
1 Screw Jack Systems MSZ Alu series EN
2 Z series and GSZ series screw jacks The preferred range with full range Z series Z series screw jacks are the preferred range with the largest number of types. The Z series feature through holes for top mounting and integral pivot bearings, features not available on the GSZ series GSZ series GSZ series screw jacks are designed for applications where smooth surface are required. These screw jacks are easier to clean. Pivot bearing Smooth surface Top mounting
3 MSZ Alu series screw jacks The low-cost option for simple applications MSZ Alu series The MSZ Alu gearboxes are low-cost options for simple applications such as manual control or motor operation with lower duty cycle. So, the stroke applications can be realized economically. Peter Gridling, Sales Manager at ZIMM, Austria FACTS: MSZ Alu series - Size 5 kn, 10 kn, 25 kn - For simple, minor applications - Manual adjustment - Motor operation with lower duty cycle - Customary dimensions 1
4 MSZ Alu series screw jacks, SN+SL Tr MSZ-5-A-S translating screw 5 kn M8/11.5deep (4x) 32H7/1.5deep made in Austria/EU 6890 Lustenau, Type: MSZ-5-A-SN static: 5 kn i = 4:1 nmax: 1800 rpm Fitting height Y 1) Screw length Overall height M6/8deep Serial-no: SRO 6) Length M8/11.5deep (4x) Opening for protective tube SRO, square 41x41 or round Ø 50 M8/11.5deep (8x) 1) Fitting height Y for 0-stroke, with Tr 18x4 screw 6) Protective tube length SRO with Tr 18x4 screw Without escape/ rotation protection Escape/ rotation protection Rotation protection, with limit switch set ES 46+stroke 61+stroke 119+stroke *Hinged bearing plate KAR, fitted on face F (below). Rotation protection with ES and KAR* 140+stroke All dimensions in mm Standard screw end* Fixing flange BF Forked end GK* Rod end KGK* Pivot bearing end SLK Bellows FB Y Y Y Y Y without bellows FB Z-5-FB Z-5-FB Z-5-FB *with bellows fixing ring Z-5-FBR Standard ratios Duty cycle thermal limit, for S+R Type MSZ-5-A-SN MSZ-5-A-SL MSZ-5-A-RN MSZ-5-A-RL Verison Translating screw Rotating screw Screw jack mounting Speed Normal Low speed Normal Low speed Standard screw 2) Tr 18x4 Tr 18x4 max. load: 5 kn compressive and tensile load Screw: M8, strength class 8.8 Screw-in depth: 10 to 11.5 mm Tightening torque: 19 Nm Screw locking: with Loctite 243 i 4:1 16:1 4:1 16:1 Stroke per drive shaft rotation 5) 1.00 mm 0.25 mm 1.00 mm 0.25 mm F F 5 [kn] rpm 1500 rpm Tr 18x rpm 500 rpm % duty cycle/10 min at 20 C These curves are for guidance under standard industrial conditions (ambient temperature etc.) and correct maintenance (lubrication etc.). The max. input drive torques for optimum service life are at the right page - technical data (1500 rpm). 2
5 MSZ Alu series screw jacks, RN+RL Tr MSZ-5-A-R rotating screw 5 kn Effective length= stroke+nut M8/11.5deep (4x) Fitting height Y+stroke 1) Screw length 32H7/1.5deep M6/8deep made in Austria/EU 6890 Lustenau, Type: MSZ-5-A-RN static: 5 kn i = 4:1 nmax: 1800 rpm Serial-no: M8/11.5deep (4x) M8/11.5deep (8x) 1) Fitting height Y for 0-stroke, with Tr 18x4 screw kn Technical data series MSZ-5-A-S / MSZ-5-A-R max. compressive/tensile force, static - 5 kn (500 kg) max. compressive/tensile force, dynamic - see duty cycle curves Nominal speed rpm max. drive shaft speed rpm (depending on the load and duty cycle) Screw size standard - Tr 18x4 2) Gear ratio - 4:1 (N) / 16:1 (L) Housing material - aluminium Worm shaft - steel, case-hardened, ground Weight of screw jack body kg Weight of screw/m kg Gearbox lubrication - grease lubrication Screw lubrication - grease lubrication Gearbox operating temperature - max. 60 C, higher on request Moment of inertia - N: kg cm 2 / L: kg cm 2 Input torque (at 1500 rpm) - max. 4.7 Nm (N) / max. 1.5 Nm (L) Drive-through torque - max. 39 Nm All dimensions in mm Flange nut FM Duplex nut DM Duplex nut DM with SIFA Self-aligning nut PM Bellows FB Y/A Y/A Y/A Y/A Y/A without bellows FB 153/ / / / /121 2x Z-5-FB / / / /144 2x Z-5-FB / / / /209 2x Z-5-FB / / / /229 Detailed instructions for determining the length can be found in catalogue XII (Section 8) Drive torque MG (Nm) - F (kn) x )5) + ML (N-normal) - F (kn) x )5) + ML (L-low speed) Breakaway torque - Drive torque MG x 1.5 Idling torque 4) ML (Nm) (N-normal) / 0.08 (L-low speed) Greasless nut FFDM Between gearbox and nut or nut and end of thread, provide for a safety distance of (minimum) 10 mm! See for the checklist in catalogue Screw Jack Systems XII (Section 7). Important information 1) - extension if a bellows or spiral spring is fitted: see the table or catalogue XII (Section 8) 2) - Tr 18x4 is standard, also available: stainless steel only for the R version: double-pitch, left-handed, increased screw Tr 20x4 3) - factor includes efficiency, ratio and 30% safety 4) - at 20 C, can be higher when new 5) - for a 4 mm screw pitch 3
6 MSZ Alu series screw jacks, SN+SL Tr MSZ-10-A-S translating screw 10 kn M8/15deep (4x) made in Austria/EU 6890 Lustenau, Type: MSZ-10-A-SN Fitting height Y 1) Screw length Overall height 35H7/2deep M8/10deep static: 10 kn i = 4:1 nmax: 1800 rpm Serial-no: SRO 6) Length M8/15deep (4x) Opening for protective tube SRO, square 56x56 or round Ø 70 M8/15deep (8x) 1) Fitting height Y for 0-stroke, with Tr 20x4 screw 6) Protective tube length SRO with Tr 20x4 screw Without escape/ rotation protection Escape/ rotation protection Rotation protection, with limit switch set ES 49+stroke 69+stroke 121+stroke *Hinged bearing plate KAR, fitted on face F (below) Rotation protection with ES and KAR* 141+stroke All dimensions in mm Standard screw end* Fixing flange BF Forked end GK* Rod end KGK* Pivot bearing end SLK Bellows FB Y Y Y Y Y without bellows FB Z-10-FB Z-10-FB Z-10-FB *with bellows fixing ring Z-10-FBR Standard-Übersetzungen Duty cycle thermal limit, for S+R Type Verison MSZ-10-A-SN Translating MSZ-10-A-SL screw MSZ-10-A-RN Rotating MSZ-10-A-RL screw Screw jack mounting Speed Normal Low speed Normal Low speed Standard screw 2) Tr 20x4 Tr 20x4 max. load: 10 kn compressive and tensile load Screw: M8, strength class 8.8 Screw-in depth: 10 to 15 mm Tightening torque: 17 Nm Screw locking: with Loctite 243 i 4:1 16:1 4:1 16:1 Stroke per drive shaft rotation 5) 1.00 mm 0.25 mm 1.00 mm 0.25 mm F F 10 [kn] rpm 1500 rpm 1000 rpm Tr 20x4 500 rpm % duty cycle/10 min at 20 C These curves are for guidance under standard industrial conditions (ambient temperature etc.) and correct maintenance (lubrication etc.). The max. input drive torques for optimum service life are at the right page - technical data (1500 rpm). 4
7 MSZ Alu series screw jacks, RN+RL Tr MSZ-10-A-R rotating screw 10 kn Effective length= stroke+nut M8/15deep (4x) Fitting height Y+stroke 1) Screw length 35H7/2deep M8/10deep made in Austria/EU 6890 Lustenau, Type: MSZ-10-A-RN static: 10 kn i = 4:1 nmax: 1800 rpm Serial-no: M8/15deep (4x) M8/15deep (8x) 1) Fitting height Y for 0-stroke, with Tr 20x4 screw kn Technical data series MSZ-10-A-S / MSZ-10-A-R max. compressive/tensile force, static - 10 kn (1 t) max. compressive/tensile force, dynamic - see duty cycle curves Nominal speed rpm max. drive shaft speed rpm (depending on the load and duty cycle) Screw size standard - Tr 20x4 2) Gear ratio - 4:1 (N) / 16:1 (L) Housing material - aluminium Worm shaft - steel, case-hardened, ground Weight of screw jack body kg Weight of screw/m kg Gearbox lubrication - grease lubrication Screw lubrication - grease lubrication Gearbox operating temperature - max. 60 C, higher on request Moment of inertia - N: kg cm 2 / L: kg cm 2 Input torque (at 1500 rpm) - max Nm (N) / max. 7.5 Nm (L) Drive-through torque - max. 57 Nm All dimensions in mm Flange nut FM Duplex nut DM Duplex nut DM with SIFA Self-aligning nut PM Bellows FB Y/A Y/A Y/A Y/A Y/A without bellows FB 182/ / / / /136 2x Z-10-FB / / / /204 2x Z-10-FB / / / /224 2x Z-10-FB / / / /274 Detailed instructions for determining the length can be found in catalogue XII (Section 8) Drive torque MG (Nm) - F (kn) x )5) + ML (N-normal) - F (kn) x )5) + ML (L-low speed) Breakaway torque - Drive torque MG x 1.5 Idling torque 4) ML (Nm) (N-normal) / 0.16 (L-low speed) Greasless nut FFDM Between gearbox and nut or nut and end of thread, provide for a safety distance of (minimum) 10 mm! See for the checklist in catalogue Screw Jack Systems XII (Section 7). Important information 1) - extension if a bellows or spiral spring is fitted: see the table or catalogue XII (Section 8) 2) - Tr 20x4 is standard, also available: stainless steel only for the R version: double-pitch, left-handed, increased screw Tr 30x6 3) - factor includes efficiency, ratio and 30% safety 4) - at 20 C, can be higher when new 5) - for a 4 mm screw pitch 5
8 MSZ Alu series screw jacks, SN+SL Tr MSZ-25-A-S translating screw 25 kn M10/15deep (4x) made in Austria/EU 6890 Lustenau, Fitting height Y 1) Screw length Overall height 40H7/2deep M8/10deep Type: MSZ-25-A-SN static: 25 kn i = 6:1 nmax: 1800 rpm Serial-no: SRO 6) Length M10/15deep (4x) M10/15deep (8x) Opening for protective tube SRO, square 56x56 or round Ø 70 1) Fitting height Y for 0-stroke, with Tr 30x6 screw 6) Protective tube length SRO with Tr 30x6 screw Without escape/ rotation protection Escape/ rotation protection Rotation protection, with limit switch set ES 53+stroke 73+stroke 125+stroke *Hinged bearing plate KAR, fitted on face F (below) Rotation protection with ES and KAR* 149+stroke All dimensions in mm Standard screw end* Fixing flange BF Forked end GK* Rod end KGK* Pivot bearing end SLK Bellows FB Y Y Y Y Y without bellows FB Z-25-FB Z-25-FB Z-25-FB *with bellows fixing ring Z-25-FBR Standard ratios Einschaltdauer-Kennfeld, thermisch, für S+R Type Verison MSZ-25-A-SN Translating MSZ-25-A-SL screw MSZ-25-A-RN Rotating MSZ-25-A-RL screw Screw jack mounting Speed Normal Low speed Normal Low speed Standard screw 2) Tr 30x6 Tr 30x6 max. load: 25 kn compressive and tensile load Screw: M10, strength class 8.8 Screw-in depth: 12 to 15 mm Tightening torque: 27 Nm Screw locking: with Loctite 243 i 6:1 24:1 6:1 24:1 Stroke per drive shaft rotation 5) 1.00 mm 0.25 mm 1.00 mm 0.25 mm F F 25 [kn] rpm 1000 rpm 1500 rpm 500 rpm Tr 30x6 % duty cycle/10 min at 20 C These curves are for guidance under standard industrial conditions (ambient temperature etc.) and correct maintenance (lubrication etc.). The max. input drive torques for optimum service life are at the right page - technical data (1500 rpm). 6
9 MSZ Alu series screw jacks, RN+RL Tr MSZ-25-A-R rotating screw 25 kn Effective length= stroke+nut M10/15deep (4x) Fitting height Y+stroke 1) Screw length 40H7/2deep M8/10deep made in Austria/EU 6890 Lustenau, Type: MSZ-25-A-RN static: 25 kn i = 6:1 nmax: 1800 rpm Serial-no: M10/15deep (4x) M10/15deep (8x) 1) Fitting height Y for 0-stroke, with Tr 30x6 screw kn Technical data series MSZ-25-A-S / MSZ-25-A-R max. compressive/tensile force, static - 25 kn (2.5 t) max. compressive/tensile force, dynamic - see duty cycle curves Nominal speed rpm max. drive shaft speed rpm (depending on the load and duty cycle) Screw size standard - Tr 30x6 2) Gear ratio - 6:1 (N) / 24:1 (L) Housing material - aluminium Worm shaft - steel, case-hardened, ground Weight of screw jack body kg Weight of screw/m kg Gearbox lubrication - grease lubrication Screw lubrication - grease lubrication Gearbox operating temperature - max. 60 C, higher on request Moment of inertia - N: kg cm 2 / L: kg cm 2 Input torque (at 1500 rpm) - max. 18 Nm (N) / max. 10 Nm (L) Drive-through torque - max. 108 Nm All dimensions in mm Flange nut FM Duplex nut DM Duplex nut DM with SIFA Self-aligning nut PM Bellows FB Y/A Y/A Y/A Y/A Y/A without bellows FB 201/ / / / /151 2x Z-25-FB / / / /213 2x Z-25-FB / / / /243 2x Z-25-FB / / / /263 Detailed instructions for determining the length can be found in catalogue XII (Section 8) Drive torque MG (Nm) - F (kn) x )5) (N-normal) - F (kn) x )5) (L-low speed) Breakaway torque - Drive torque MG x 1.5 Idling torque 4) ML (Nm) (N-normal) / 0.26 (L-low speed) Greasless nut FFDM Between gearbox and nut or nut and end of thread, provide for a safety distance of (minimum) 10 mm! See for the checklist in catalogue Screw Jack Systems XII (Section 7). Important information 1) - extension if a bellows or spiral spring is fitted: see the table or catalogue XII (Section 8) 2) - Tr 30x6 is standard, also available: stainless steel only for the R version: double-pitch, left-handed, increased screw Tr 40x7 3) - factor includes efficiency, ratio and 30% safety 4) - at 20 C, can be higher when new 5) - for a 6 mm screw pitch 7
10 MSZ Alu accessories Wide range of accessories The right accessories can be found in the catalogue Screw Jack Systems XII 8
11 MSZ Alu checklist MSZ Alu checklist Parameters Quick and easy copy select fax / or PDF at Company: Address: Contact: Dept.: Date: Phone: Fax: 1. max. lifting force in kn - per gearbox kn for the entire system kn - in tension kn in compression kn - Load: static kn dynamic kn Installation axis c vertical c horizontal c pivoting Type of load c smooth c impact loads c vibration 2. max. lift/ travel mm c effective working stroke mm 3. Lifting speed c type N = 25 mm/s (1.5 m/min) ^= 1 mm per input torque c type L = 6,25 mm/s (0.375 m/min) ^= 0.25 mm per input torque 4. Duty factor, work cycle, description of cycle strokes per hour strokes per day Hours per day c 8 c 16 c Type c S Translating screw c R Rotating screw 6. Drive c Manual release c Three-phase AC motor c with brake c 7. Operating conditions: c Dry c Humid c Dust c Chipping c c Guided movement c No guides (no dyn. lateral forces) Ambient temperature: min. C max. C 8. Quantity/Required: Prototype: Series: Purpose/description of the function/ambient conditions (description or sketch) 9
12 ZIMM screw jacks Z series and GSZ series A screw jack gearbox is an electromechnical drive and is used where weights have to be very accurately controlled and carefully positioned. Some areas of use - Assembly lines of practically every renowned motor manufacturer - Elevating platforms and aircraft manufacture assembly and maintenance - Production lines: for flat screen manufacture for production of plastic profiles for the window industry for the manufacture of sheet steel and steel profiles, insulated glass for fleece materials, hygiene products and insulation material - Packing machines - Drinks bottle filling and labelling plants - Paper processing plants - Food processing industry ZIMM building block system Sizes ranging from 2.5 kn to 1000 kn - Screw jacks with trapezoidal and ball screws - Bevel gearboxes - Three phase AC motors and motor flanges - Limit switches and rotary pulse encoders - Couplings and connecting shafts - Attachments (fork heads, ball heads, pivot bearing heads, clamping flanges, opposed bearing plates, etc.) - Protective covers (bellows, spiral springs) - Pivot bearing plates and pivot mounts ZIMM News New ball screw version - Loads from 5 kn to 1000 kn - Diameter 16 to 160 mm - Leads from 5 to 80 mm - Stroke speeds from 1 to 125 mm/s with high loads - Low power consumption Lubrication systems Proper lubrication for screw jack equipment NEW Z series System with various accessories Catalogue Screw Jack Systems XII available in: German English French Italian Spanish Korean CAD product configurator CAD-Download: Visit us at our new website: GSZ series 2014/03 ZIMM Maschinenelemente GmbH + Co KG All rights reserved. No part of these documents may be reproduced or translated for whatever purpose without the express written permission of ZIMM Maschinenelemente GmbH + Co KG. Misprints and errors excepted. Specifications subject to change without notice. ZIMM Maschinenelemente GmbH + Co KG Millennium Park Lustenau/Austria Phone: 0043(0)5577/806-0 Fax: 0043(0)5577/ info@zimm.at Internet:
XII 1.1. Screw Jack Systems Electro Mechanical Positioning. Phone:
XII 1.1 crew Jack ystems Electro Mechanical Positioning www.zimmscrewjacks.us Phone: 224-765-0663 POGAM, MAKET EGMENT Program benefits Precision acme and ball screws Translating and otating version Multiple
Selection, Calculation, Checklists
Selection of Screw Jack System and Arrangement 4.1 Consideration of application requirements 4.2 Parameter see checklist 1 to 6 S version standing spindle Preselection of screw jack size see diagram on
System Overview - Screw Jacks S
3. System Overview Screw Jacks S 3.3, Standing Spindle S Fixing flange BF Pivot bearing head SLK Motor Rod end KGK Bellow FB Spiral spring SF Rotary pulse encoder DIG Coupling KUZ Motor flange MF Lubrication
Engineering Catalogue 2006
Engineering Catalogue 06 The fascination of Building Block Systems The fascination with building block systems inspired creativity in many of us as children. The idea was conceived and successfully executed
Z-50-S Standing Spindle 50 kn
Z-50-S Standng Spndle 50 kn Safety Safety nut nut New: Spndle lubrcaton durng operaton Ths page Secton.29 Secton.27 M12/16 deep 52J7/ deep M10/15 deep SRO Length M12/16 deep Fttng heght Y Overall heght
BEVEL GEARBOXES. Bevel gearboxes Advantages. Same mounting height no support plates required. Additional attachment options. Screw jack gearboxes
Bevel gearboxes Advantages Same mounting height no support plates required Screw jack gearboxes Bevel gearboxes The new ZIMM bevel gearboxes in the KSZ-H series have the same fitting height as the ZIMM
3. Screw jacks, rotating
3. 061 by Nozag - 2015 3. The spindle has a fixed connection to the worm wheel and rotates with it. The nut therefore screws itself up and down. The innovative Nozag screw jack kit makes it possible to
DSH screw jack. Product description. DSH screw jack
Product description DSH screw jack Conventional screw jack applications consist of one or more screw jacks. Usually they are driven by one electric motor and typically connected via drive shafts or couplings
SGT screw jack. Product description. SGT 5 to SGT 1000 screw jack Both trapezoidal and ball screw versions.
Product description SGT to SGT screw jack Both trapezoidal and ball screw versions ALBERT-SGT-screw jacks are electromechanical transmission components suitable for a wide spectrum of industrial machinery.
Bevel gearboxes. KSZ and KGZ Advantages. Same mounting height no support plates required. Suitable for standard motor flanges
KSZ and KGZ Advantages Same mounting height no support plates required Screw jack gearboxes ZIMM bevel gearboxes KSZ and KGZ have the same installation height as the ZIMM screw jack gearbox. No support
Screw jacks MA Series
Screw jacks MA Series Screw jacks MA Series with travelling screw (Mod.A) STRUCTURAL ELEMENTS 1 10 11 8 7 6 1 3 13 4 9 14 8 11 10 5 6 7 1 - acme screw in steel C 43 (UNI 7847), whirled thread - worm shaft
www.motiontech.com.au Copyright SERVOMECH This catalogue contents are under publisher copyright and may not be reproduced unless permission is agreed. Every care has been taken to ensure the accuracy of
C-SERIES S-SERIES. Metric Machine Screw Jacks EMA LINEAR ACTUATORS
C-SERIES S-SERIES Metric Machine Screw Jacks EMA LINEAR ACTUATORS Power Jacks has a proud engineering heritage dating from the earliest years of the 20th Century. A heritage that is about excellence: about
V SWISS MADE LINEAR TECHNOLOGY
Excerpt from main catalogue inear modules V 11-15 SWISS MDE INER TECHNOOGY ine Tech inear modules Table of contents Product overview 6 7 Design fundamentals / ubrication / Maintenance 8 Profile cross-sections
Linear actuators ILA Series
Linear Actuator ILA Series without input drive, with flange and input shaft Linear Actuator ILA Series with input drive - with 2 bevel gearmotors - with single bevel gearmotor - with helical coaxial or
1. Product overview Basic-Line-Module AXN Product description Basic-Line-Module AXN 4-5. Guide system Roller guide 6 Drive system Gear belt 7
Directory Page 1. Product overview Basic-Line-Module AXN 3 2. Product description Basic-Line-Module AXN 4-5 Guide system Roller guide 6 Drive system Gear belt 7 3. Basic-Line-Modul AXN 45-Z 8-9 AXN 65-Z
V SWISS MADE LINEAR TECHNOLOGY
Compact units Excerpt from main catalogue SWISS MADE LINEAR TECHNOLOGY V 11-15 Line Tech compact units Table of contents Product overview 106 107 Design fundamentals / Lubrication / Maintenance 108 Profile
JTW-SERIES MACHINE SCREW JACK
J A C TO N I N D U S T RY C O., LT D L I F T I N G S Y S T E M S S O L U T I O N S TEL: 86-769-81585810, 81585852 SKYPE: jactonjack EMAIL: sales@screwactuator.com WEB: www.screwactuator.com SERIES MACHINE
SERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion.
1.1 SERVOMECH LINEAR ACTUATORS SERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion. Developed and manufactured for industrial applications,
Worm Gear Screw Jacks Muli, Jumbo
Worm Gear Screw Jacks Muli, Jumbo Worm Gear Screw Jacks Contents Introduction worm gear screw jacks........................................ 4 7 Systematic gear technology...........................................................
C-SERIES S-SERIES. Metric Machine Screw Jacks
-SERIES S-SERIES Metric Machine Screw Jacks Power Jacks are a manufacturer focused on providing customers with the best engineered solution for precision linear actuation, power transmission and mechanical
CUBIC SCREW JACKS. Features & Benefits. Specifications
CUBIC SCREW JACKS Features & Benefits Versatile Mounting - Unit can me mounted upright or inverted Clean surface - Easy to maintain in dirty environments Contemporary design for improved aesthetics Fast
Series BD Screw Jacks
www.radicon.com Series BD Screw Jacks Technical Up to - 100Te / 5m/min Screw Jacks CBD-1.00GBD0111 SERIES BD PRODUCTS IN THE RANGE Serving an entire spectrum of mechanical drive applications from food,
DYNA GEAR. The highly dynamic servo right angle gearbox.
MS- Gr a es s ne r GmbH & Co. K G THE GEAR COM PAN Y The highly dynamic servo right angle gearbox Internal highlights The design of the DynaGear range has been influenced by extremely varied applications
Sizes 50, 65, 80. Presence of internal channels for re-lubrication Large range of axis mounting accessories
> Series 5E electromechanical axis C_Electrics > 207 Series 5E electromechanical axis New models Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high
More power with every stroke...
More power with every stroke... 04/2017 The LZ FL/PL electric cylinder Greater application flexibility Width, length and height adjustment Features: 99Low adjustment speeds 99Low duty cycle 99Impact resistant
Sizes 50, 65, 80. Accessories for cables fixing. Presence of internal channels for re-lubrication Large range of axis mounting accessories
> Series 5E electromechanical axis C_Electrics > 206 Series 5E electromechanical axis New Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high dynamics
For new perspectives. WPLE - line WPLE
54 - line For new perspectives The is the logical refinement of our PLE series. This bevel gearbox series was designed especially for space-saving installation in a right-angle position of the motor/gearbox
3.2 lean SL 5 Technical data & dimension sheets lean SL series Technical data
3.2.1 lean SL series Technical data 3.2 lean SL 5 Technical data & dimension sheets 3.2.1 lean SL series Technical data lean SL lean SL double! Make sure that the article number refers to the correct pinion
Max. particle size 5 µm. Pressure for determining piston forces Repetitive precision. Polyurethane
Piston rod cylinders Guide cylinders 1 Ambient temperature min./max. +0 C / +60 C edium Compressed air ax. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure for determining piston
Contents. Page. 1. Product description. 2. The AXC line of linear axes. 3. AXLT line of linear tables. AXC and AXS product overview...
SNR Industry Contents Page 3 1. Product description AXC and AXS product overview... 6-8 Dynamic load ratings of the linear motion systems... 9 Compact modules... 10-11 Linear tables... 12 Telescopic axes...
Linear Actuator with Toothed Belt Series OSP-E..B
Linear Actuator with Toothed Belt Series OSP-E..B Contents Description Data Sheet No. Page Overview 1.20.001E 21-24 Technical Data 1.20.002E-1 to 5 25-29 Dimensions 1.20.002E-6 30 Order Instructions 1.20.002E-7
The new performance class...
The new performance class... 10/2017 EP(X)-II 30/40 EP(X)-II 30/40 twin tube actuator The latest generation of twin tube units Move-Tec EP(X)-II 30/40 Your application takes centre stage slow langsam A
RACK JACK. Synchronous Lifting Systems
RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion
DCmind: DC direct-drive brush motors
DCmind: DC direct-drive brush motors 6 mm - W Silent motor V and V built in EMC filter class B Excellent efficiency ong life IP6 In accordance with U - CE - ROHS regulations Part numbers V V 8 V 9 V Type
Precision on the highest level
6 - line Precision on the highest level The series is the standard Neugart inline high precision planetary gearhead for applications with very high precision requirements. Whether high torque density,
Servomech 1.4 BALL SCREW LINEAR ACTUATORS Series BSA
1.4 BALL SCREW LINEAR ACTUATORS Series BSA Technical features table SIZE FEATURES BSA 10 BSA 20 BSA 25 BSA 30 BSA 40 Rod diameter [mm] 25 25 30 35 40 Protective tube diameter [mm] 36 36 45 55 60 Motor
E-Series Screw Jacks. Metric Machine Screw Jack. Stainless Steel Machine Screw Jack. Metric Ball Screw Jack
E-Series Screw Jacks Metric Machine Screw Jack Stainless Steel Machine Screw Jack Metric Ball Screw Jack E-Series 1 BEST ENGINEERED SOLUTION FOR PRECISION LINEAR ACTUATION, POWER TRANSMISSION & MECHANICAL
Accessories for screw jacks type SGT
Product description Accessories for Albert SGT screw jacks Both trapezoidal and ball screw version The comprehensive range of Albert accessories for screw jacks provides the designer with the means to
Servomechkaramoottorit
Solutions for power transmission Servomechkaramoottorit www.konaflex.fi INDEX 1 Servomech 1. THE PRODUCT 1.1 SERVOMECH Linear Actuators......................... Page 2 1.2 SERVOMECH Linear Actuators range............................
The world is movement
The world is movement 01 SCREW JACKS THERE IS A DRIVING FORCE MORE POWERFUL THAN STEAM, ELECTRICITY AND ATOMIC ENERGY: THE WILL. ALBERT EINSTEIN Physicist Niasa actuators in the Tonopah thermo-solar plant,
Screw jacks, non-rotating Summary System Program
Summary System Program About us What counts is success We help you achieve it Today clear competitive advantages and opportunities depend on flexibility, speed, innovation and continuous improvement. We
NEFF. Screw Drives Worm Gear Screw Jacks 04/2009
NEFF S C R E W D R I V E S Screw Drives Worm Gear Screw Jacks 04/2009 Neff screw drives If you want to strike new paths for your customers from the fields of mechanical engineering and handling/automation
LINEAR ACTUATORS WITH INTEGRATED REDUCTION AND CUBIC GEARBOX
03 LINEAR ACTUATORS WITH INTEGRATED REDUCTION AND CUBIC GEARBOX FM Series: Steel tube AM Series: Aluminum tube Page: 115 Page: 116 SUSTAINABILITY IS INDUSTRIALISED ECOLOGY. DAVID GARCÍA HOME-THERME NIASA
EURO-BEARINGS LTD COMBINED ROLLER BEARINGS & MATING STEEL PROFILES CATALOGUE. Tel: +44 (0)
COMBINED ROLLER BEARINGS & MATING STEEL PROFILES CATALOGUE email: sales@euro-bearings.com Tel: +44 (0)1908 511733 2015 CATALOGUE CONTENTS COMBINED ROLLER BEARINGS Standard CR Bearings Eccentric Adjustable
Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 71-74 Technical Data 75-78 Dimensions 79 71 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
antriebstechnik ELA Electromechanical Linear Actuator
D antriebstechnik ELA Electromechanical Linear Actuator Electromechanical Linear Actuators ELA Electromechanical Linear Actuators (ELA) consist of trapezoidal or ball screws driven by an electric motor
SNR, YOUR GUIDE TO LINEAR MODULES
SNR, YOUR GUIDE TO LINEAR MODULES A bearing manufacturer known across the world For almost a century NTN-SNR has been focusing on the development, design and manufacture of bearings. Today NTN-SNR has
Ball screw drives KGT General technical data
KGT General technical data Manufacturing process The thread profile is produced by cold rolling in the thread rolling method. Both screw and nut have a gothic thread profile. The load angle is 45. Linear
PRODUCT PROGRAMME. Gear drive solutions
PRODUCT PROGRAMME Gear drive solutions Dedicated gear drive BJ-Gear A/S is one of the leading companies within developing, manufacturing and assembling gearboxes, geared motors, linear products, special
C-SERIES S-SERIES EMA LINEAR ACTUATORS. Metric Machine Screw Jacks.
C-SERIES S-SERIES Metric Machine Screw Jacks EMA LINEAR ACTUATORS 0i 02 Power Jacks has a proud engineering heritage dating from the earliest years of the 20th Century. A heritage that is about excellence:
DCmind: DC direct-drive brush motors
DCmind: DC direct-drive brush motors mm - 5 W Silent motor V and V built in EMC filter class B Excellent efficiency ong life IP5 In accordance with U - CE - ROHS regulations Part numbers V V V Type 95
DRIVE-TECHNOLOGY INKOMA - GROUP. Accessories for screw jacks type SGT. Maschinenfabrik ALBERT GmbH Technologiepark 2 A Gampern - Austria
DRIVETECHNOLOGY ALBERTINKOMA GROUP Accessories for screw jacks type SGT Maschinenfabrik ALBERT GmbH Technologiepark 2 A 81 Gampern Austria phone: +3/(0)76823 fax: +3/(0)7682399 email: office@albert.at
Performance: Spiral Bevel Series
Performance: Spiral Bevel Series GAM can. If you don t see exactly what you need, let us know. We can modify the VC Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
Sizes 32, 40, 50 and 63
> Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary
Standard with cone bushing. Backlash-free Safety Clutch
EAS -Compact ratchetting clutch/synchronous clutch The Backlash-free Safety Clutch for Standard with cone bushing Packaging Machinery Machine Tools Paper Machinery Indexing Drives Servo Motors EAS -NC
SPIRACON. ROLLER SCREWS SPIRACON PRODUCT CATALOGUE
SPIRACON ROLLER SCREWS PRODUCT CATALOGUE SPIRACON www.powerjacks.com TOTAL CAPABILITY IN ACTUATION Power Jacks is a world leader and pace-setter in the field of mechanical linear actuation and power transmission,
drylin TR Lead Screw Drives
drylin TR drylin TR Lead Screw Drives Maintenance free, dry running, low noise Insensitivity to dirt Corrosion-free Trapezoidal and high helix thread Excellent emergency running properties Anti-Backlash
Actuator LA40. Data sheet LINAK.COM/MEDLINE-CARELINE
Actuator LA40 Data sheet LINAK.COM/MEDLINE-CARELINE LA40 The LA40 is a low noise and powerful actuator which is available in a 1500N, 4000N, 6000N and an 8000N version. With the LA40, LINAK offers a new
Compact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company
with ball screw drive and toothed belt drive R310EN 2602 (2007.02) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings
Main Catalogue. EichenbergerGewinde. 100 % Swiss made
EichenbergerGewinde 100 % Swiss made Main Catalogue Carry ball screws Carry Speed-line high-helix ball screws Rondo round thread lead screws Summary description ball screws Due to their premium quality
LINEAR UNITS CT & MT
LINEAR UNITS CT & MT Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right
DRIVE-TECHNOLOGY INKOMA - GROUP. Inkoturn couplings
INKOM-GROUPINKOM - DRIVE-TECHNOLOGY GROUP Inkoturn couplings INKOM-GROUP Headoffice Sitz der INKOM Maschinenbau GmbH Neue Reihe 44 D - 3862 Schandelah - Germany phone: +49/(0)5306-922-0 fax: +49/(0)5306-922-50
Power Jacks have taken time, engineering excellence and the best people to produce the ultra compact Neeter Drive gearbox.
202 www.powerjacks.com Power Jacks have taken time, engineering excellence and the best people to produce the ultra compact Neeter Drive gearbox. Our expertise has been built on a history of engineering
Linear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD
Linear Drive with and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Contents Description Page Overview 11-14 Version with Recirculating Ball Bearing Guide Technical Data 15-17
Acme Screw Jacks. Catalogue
Acme Screw Jacks Catalogue SERVOMECH Screw Jacks MA Series Screw Jacks - high efficiency Max. duty cycle: travelling screw: 40 % over 10 min (30 % over 1 hour) travelling nut: 30 % over 10 min (20 % over
ELECTRIC AXIS ELEKTRO SVAK SERIES ACTUATORS
ELECTRIC AXIS ELEKTRO SVAK SERIES 1 ELECTRIC AXIS ELEKTRO SVAK SERIES This belt-driven rodless electric actuator is characterised by the fact that the motor and reducer unit is integral with the carriage,
Screw jacks, rotating Summary System Program
Summary System Program About us What counts is success We help you achieve it Today clear competitive advantages and opportunities depend on flexibility, speed, innovation and continuous improvement. We
Tandler. ServoFoxx Servo Gearheads
Tandler ServoFoxx Servo Gearheads ServoFoxx Inline and Right Angle Planetary Servo Gearheads The Tandler ServoFoxx series of servo gearheads provide the ultimate in precision motion control for highly
Modular belt conveyor WL678X
Modular belt conveyor 678X Contents System information...139 Conveyor sections...140 Modular Belts - Introduction...141 Modular belts...142 Conveyor Beams - Introduction...143 Conveyor frame components...145
Modular belt conveyor WL526X
Modular belt conveyor 526X Modular plastic belt conveyor 526X Contents System information...123 Conveyor sections...124 Modular Belts - Introduction...125 Modular belts...126 Conveyor Beams - Introduction...127
Electric cylinder ESBF-BS/-LS Operating instructions b [ ]
![Electric cylinder ESBF-BS/-LS Operating instructions b [ ]](/thumbs/81/84386573.jpg "Electric cylinder ESBF-BS/-LS Operating instructions b [ ]")
Electric cylinder ESBF-BS/-LS-32... 100 en Operating instructions 8076295 2017-11b [8079297] Translation of the original instructions Symbols: Warning Installation and commissioning may only be performed
Linear Drive with Ball Screw Drive Series OSP-E..SB
Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions
LINEAR SYSTEMS LINEAR SYSTEM LB LINEAR SYSTEM LB MINITEC PROFILE SYSTEM
LINEAR SYSTEMS LINEAR SYSTEM LB BL me t s y s r aen i L LINEAR SYSTEM LB MINITEC PROFILE SYSTEM 285 LINEAR SYSTEMS LINEAR SYSTEM LB LINEAR SYSTEM LB The LB design is based on LME 20 linear ball bearings
Main Catalogue. EichenbergerGewinde. 100 % Swiss made
EichenbergerGewinde 100 % Swiss made Main Catalogue Carry ball screws Carry Speed-line high-helix ball screws Speedy high-helix lead screws Rondo round thread lead screws The choice is yours Thread rolling
Studying the Positioning Accuracy
Ball Screw Studying the Positioning Accuracy Causes of Error in the Positioning Accuracy Point of Selection Studying the Positioning Accuracy The causes of error in the positioning accuracy include the
Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 79-82 Technical Data 83-88 Dimensions 89 79 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
Planar surface gantries EXCH
Key features At a glance General Optimum dynamic response when compared with other Cartesian gantry systems The drive concept ensures low moving dead weight Flat system design Perfectly matched drive and
igus slewing ring bearings
PRT... igus slewing ring bearings plastics for longer life... igus.com/prt... IG-B12 iglide PRT - Table of Contents Maintenance free slewing ring bearing Type 01: High rigidity from page 5 Type 01 with
Modular belt conveyor WL374X
S Modular belt conveyor Contents System information...107 Conveyor sections...109 Modular Belts - Introduction...110 Modular belts...111 Conveyor Beams - Introduction...112 Conveyor frame components...114
Profile rail guides LLT
Profile rail guides LLT Contents The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
Actuator LA29. Data sheet LINAK.COM/HOMELINE
Actuator LA29 Data sheet LINAK.COM/HOMELINE LA29 The LA29 actuator is a HOMELINE actuator specially made for domestic applications. The actuator has a very short installation dimension as the distance
technology made in Italy
technology made in Italy GB RD * * VS made in China Technology Made in Italy Since 1955 Varvel has been making speed reducers and variators for light industry applications. Reliable partner in power transmission
* Contents. Company Profiles...2. Introduction...3. Technical Datasheet...4. Selection Guide... 5~9. Screw Jack Lift Systems...
0 * Contents Company Profiles...2 Introduction....3 Technical Datasheet.......4 Selection Guide..... 5~9 Screw Jack Lift Systems.... 10~11 Screw Top End Types Dimensions. 12 RN-0.5T~RN-100T Dimensions......13~24
RACK JACK. Synchronous Lifting Systems
RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion
Precision ball screws
Recirculating ball screws Precision ball screws Thomson Linear Motion. Optimized. Linear Motion. Optimized. The ideal solution often is not found in the fastest, most robust, most precise or even the most
POWERGEAR. Miniature NEW. Actual Size. Impressively small and incredibly powerful.
MS-Graessner GmbH & Co. KG THE GEAR COMPANY POWERGEAR Miniature NEW Impressively small and incredibly powerful. Actual Size The bevel gearbox with minimum size at maximum performance and precision The
A5 BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK
BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK Belt-driven rodless electric axis with a V-Lock interface. The structure features an extremely lightweight yet high-strength anodised aluminium extruded
Industry. SNR Linear Motion : Ball screws
Industry SNR Linear Motion : Ball screws SNR A global manufacturer of bearings. For almost a century, SNR has designed, developed and manufactured bearings to meet the most demanding of applications. In
S-SERIES Translating Screw Jack 50kN
Translating Screw Jack 50kN Performance ST050 Screw Jack Model 4 S-050 apacity kn 50 ead Screw 1 iameter (mm) 40 ead (mm) 9 18 Option 1 6:1 ear Ratios Option 2 24:1 Option 3 8:1 (OR) 4 x Turns of worm
ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES ACTUATORS
ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES 1 ELECTRIC AXIS - RODLESS ELEKTRO SK SERIES Electric axis without screw piston rod, with V-Lock interface. The cylinder frame is made of anodized extruded
Linear Guideways ov -linear -guidew ays-divider - U pdated
Linear Guideways ov-linear-guideways-divider - Updated - 11-01-2017 163 Linear Guideways Linear Guideways Introduction L1016 Linear guideways Linear guideways are widely used throughout industry for heavy-duty
Electric actuation for industrial automation
Electric actuation for industrial automation C_ELECTRICS CATALOGUE Technology and innovation for industrial applications Every application in the industrial automation sector has different and very specific
...components in motion. Miniature Linear Guideways
...components in motion Miniature Linear Introduction Miniature linear guideway systems are widely used throughout industry for precise, compact applications. Precise and Stainless The gothic arch shape
Linear actuators ATL Series
. TECHNICAL DATA - acme screw linear actuators ATL Series ATL 63 ATL 80 ATL 100 ATL 15 SIZE 50 60 90 100 150 Push rod diameter [mm] 70 90 115 150 00 Outer tube diameter [mm] 30 35 40 60 80 Front attachment
PERFORMANCE with: Duty Cycle Fi = 100 % over 10 min. at 25 C environment
5.1 BALL SCREW LINEAR ACTUATOR BSA 10 Compact ball screw linear actuator with integral electric motor suitable for push and pull motions. Rolled and hardened ball screw. Case hardened and ground ball nut.
Product Description. Characteristic features R310A 2402 ( ) Linear Modules MLR
9 Bosch Rexroth Corporation R310A 40 (1.11) MLR Product Description Characteristic features MLR...: with Cam Roller Guide and Toothed Belt Drive for high-speed applications (up to 10 m/s) with Cam Roller
Bevel gearboxes. Catalogue
Bevel gearboxes Catalogue INDEX Bevel gearbox description... page 2 Manufacturing features... page 2 Materials and components... page 4 Bevel gearbox selection... page 5 Thermal power limit... page 7
Backlash-free Metal Bellow Couplings
Backlash-free Metal Bellow Couplings Edition 3/2008 pioneer in innovation GERWAH pioneer in innovation Future made by GERWAH. Your advantages: The GERWAH name is synonymous with development and manufacturing
L1 (Standard Motor Length) L2 (Brake Motor Length)
HepcoMotion Geared Motor Option The optional geared motor will be the preferred choice for many applications as it provides an excellent combination of power, accuracy, flexibility and value. HepcoMotion