Lastec Mower 2861F. Parts Manual Manual Part Number: Man-2861

Transcription

1 Lastec Mower 2861F Parts Manual Manual Part Number: Man-2861 LASTEC 7865 N County Road 100E Lizton, Indiana Phone (317) Fax (317)

2 8 Lastec, 2004 Printed in the United States of America, all rights reserved. No part of this manual may be reproduced in any form by any photographic, electronic, mechanical or other means or used in any information storage and retrieval system without written permission from Lastec, Inc N. County Road 100E Lizton, IN 46149

3 Table of Contents Section-Page SECTION 1 GENERAL INFORMATION How To Use The Parts List Torque Values Decals SECTION 2 DRIVE UNIT Seat Assembly (Serial Numbers and earlier) Seat Assembly (Serial Numbers and later) Front Yoke Assemblies Wheel Assy, 13x6.50x Control Box Assembly (Serial Number and later) Control Panel Assembly (Serial Number to ) Control Panel Assembly (Serial Number and prior) Hand Contol Assembly Emergency Brake Assembly Deck Lift Assembly (Optional) Front Deck Lift Rod Assembly (Serial Number and prior) Front Deck Lift Rod Assembly (Serial Numbers to present) Rear Deck Lift Rod Assembly Framework SECTION 3 HYDRAULIC SYSTEM Hydraulic Layout Diagram Hydraulic Pump (Left Shown) Hydraulic Motor, Right Hydraulic Motor, Left Brake Assembly and Wheel Hydraulic Tank (A) Hydraulic Tank (B) Hydraulic System Idler Table of Contents 2861/ iii

4 Table of Contents Section-Page SECTION 4 ENGINE AND BATTERY BOX Fuel Tank (Before Serial Number ) Fuel Tank (After Serial Number ) Fuel System Engine Assembly Clutch Guard Assembly Clutch Assembly Motor Mount and Drive Belt Idler (Serial Number and prior) Motor Mount and Hardware (Serial Number and later) Drive Belt Idler (Serial Number and later) Air Intake Assembly Exhaust Battery Box SECTION 5 DECKS Deck Framework Deck Mounting Hardware Spindle Housing Assembly Single Pulley Spindles Double Pulley Spindle Tensioner Assembly Grass Chute (Serial Number and prior) Grass Chute (Serial Number and later) Rear Anti-scalp Roller Front Anti-scalp Rollers Anti-scalp Wheels iv 2861/ Table of Contents

5 Table of Contents Section-Page Table of Contents 2861/ v

6 Table of Contents Section-Page vi 2861/ Table of Contents

7 General Information 1 SECTION 1 GENERAL INFORMATION General Information Lastec Mower /

8 1 General Information How To Use The Parts List 1.1 How To Use The Parts List When looking for a specific part, look in the index for the page location of that part. Go to the appropriate section and locate the part in the illustration via the table reference number. Shadowed parts in the illustration are either hidden behind other parts, or are shown only as location reference in that illustration. Groups of identical items are not referenced individually. Mirrored parts have different part numbers but are referenced with the same reference number. Parts that have changed will have the unit s serial number break referenced. Left and right is referenced to the seated operator. REF PART # DESCRIPTION QTY SAMPLE ASSEMBLY, COMPLETE N/A First Part, Left First Part, Right Part, New (Serial Number and later) Part, Old (Serial Number and prior) 1 3 F Part, Hardware 2 4 P111 Part, Widget 1 Left Right 1-2 Lastec Mower / General Information

9 General Information Torque Values Torque Values Torque Values Below is a table of suggested torque values for this unit. Please use these torque values on this unit unless otherwise specified. Grade Units SAE 5 SAE 8 Tensile Strength PSI PSI Grade Mark Bolt Dia /4 1/4 5/16 5/16 3/8 3/8 7/16 7/16 1/2 1/2 9/16 9/16 5/8 5/8 3/4 3/4 7/8 7/8 1 Threads. Per In Units SAE 5 SAE 8 in-lbs (Nm) in-lbs (Nm) in-lbs (Nm) in-lbs (Nm) in-lbs (Nm) in-lbs (Nm) in-lbs (Nm) ft-lbs (Nm) ft-lbs (Nm) ft-lbs (Nm) ft-lbs (Nm) ft-lbs (Nm) ft-lbs (Nm) ft-lbs (Nm) ft-lbs (Nm) ft-lbs (Nm) ft-lbs (Nm) ft-lbs (Nm) ft-lbs (Nm) ft-lbs (Nm) ft-lbs (Nm) ft-lbs (Nm) ft-lbs (Nm) ft-lbs (Nm) 20 (2.3) 24 (2.7) 35 (4.0) 40 (4.5) 50 (5.7) 95 (10.7) 95 (10.7) 17 (22.6) 20 (27.1) 30 (40.7) 35 (47.5) 50 (67.8) 55 (74.6) 75 (101.7) 85 (115.3) 105 (142.4) 115 (155.9) 150 (203.4) 160 (217.0) 170 (230.5) 175 (237.3) 302 (409.5) 300 (406.8) 466 (631.8) - 30 (3.4) 45 (5.1) 50 (5.7) 65 (7.3) 125 (14.1) 150 (17.0) 23 (31.2) 25 (33.8) 40 (54.2) 45 (61.0) 65 (88.1) 70 (94.9) 100 (135.6) 110 (149.2) 135 (183.1) 150 (203.4) 195 (264.4) 210 (284.8) 220 (298.3) 225 (305.1) 473 (640.9) 400 (542.4) 714 (967.4) General Information Lastec Mower /

10 1 General Information Decals 1.3 Decals PART # DESCRIPTION QTY Decal Kit, Fixed Deck Mower Decal, Hot Engine Warning Decal, Warning Operational Safety Decal,Fwd/Rev Motion (rev B) Decal, Brake Control Decal, Warning Operate From Seat Decal, Warning Operate With Guards Decal, Danger, Thrown Objects/Arrow Decal, Warning, Slope Decal, Articulator Logo Decal, Throttle/Deck Height Decal, Belt Diagram 1 P478 Decal, Danger - Rotating Blades Lastec Mower / General Information

11 General Information Decals 1 General Information Lastec Mower /

12 1 General Information Decals 1-6 Lastec Mower / General Information

13 Drive Unit 2 SECTION 2 DRIVE UNIT Drive Unit Lastec Mower/

14 2 Drive Unit Seat Assembly (Serial Numbers and earlier) 2.1 Seat Assembly (Serial Numbers and earlier) REF PART# DESCRIPTIONS QTY Seat Assy, F Nut, 5/16-18 Nyl Lock 11 2 F Washer, 5/16 SAE Flat Bar, Anti-Sway 2 4 F Bolt, 5/16-18x1 1/2 HH Plate, Sway Bar Bushing Bushing, Seat Rubber Spacer, Sway Bar Bushing Plate Wldmt, 2561 Seat Mount Spring,.734x2.25x.105 Extension F Bolt, 5/16-18 x 3/4 HH Pan Wldmt, Seat Plate, Sway Bar Mount 4 13 F Nut, 5/16-18 Nylok Locking Jam 8 14 F Bolt, 3/8-16x 4 1/2 HH Gr F Nut, 3/8-16 Hex Nyl Lock 2 16 F Bolt, 5/16-18x2 1/2 HH Gr P Seat, Operator 1 18 P26247 Arm Rests (sold as a pair) 2 19 F Bolt, 5/16-18 x 1/2HH Gr Cable, Seat Lanyard 1 21 F WASHER,5/16 X 1 1/4 FENDER ZINC 2 22 F Bolt, 1/4-20x3/4 FT HHC 1 23 F Nut, 1/4-20 Nylock Spring, Ext 3/8x F Nut, 1/4-20 Half Nyl Lock 1 1 Seat P26206 is no longer avaiable. When ordering a replacement, order seat kit , which will include the arm rests. The P26247 armrests do not fit the new seat. 2-2 Lastec Mower/ Drive Unit

15 Drive Unit Seat Assembly (Serial Numbers and earlier) To seat Drive Unit Lastec Mower/

16 2 Drive Unit Seat Assembly (Serial Numbers and later) 2.2 Seat Assembly (Serial Numbers and later) REF PART# DESCRIPTIONS QTY Seat Assy, Gas Seat, Air Ride (Color Gray) 1 2 F Bolt, 5/16-18 x 3/4 HH 3 3 F Bolt, 5/16-18x1 1/2 HH Spacer, Main Drive Idler 2 5 P630-7 SEAT SLIDE, RIGHT( Part of P630 Seat) 1 6 F Nut, 5/16-18 Nyl Lock 4 7 P630-6 SEAT SLIDE, LEFT (Part of P630 Seat) 1 8 F Nut, M8 Hex Nylock 5 9 F Nut, 5/16-18 Nylon Locking Jam 1 10 F WASHER,5/16 X 1 1/4 FENDER ZINC Cable, Seat Lanyard 1 12 F Nut, 3/8-16 Hex Nyl Lock 2 13 F Bolt, 3/8-16x4 1/2 Hex Head GR2 Zinc Spring, Ext 3/8x Pan Wldmt, Seat 1 Not Shown Seat Delay Assy Lastec Mower/ Drive Unit

17 Drive Unit Seat Assembly (Serial Numbers and later) Drive Unit Lastec Mower/

18 2 Drive Unit Front Yoke Assemblies 2.3 Front Yoke Assemblies REF PART# DESCRIPTION QTY. Wheel Mount Assy, Comm. Mower Wheel Mount Assy, Comm. Mowe 1 P195 CAP, HUB 1 2 P434 Nut, 3/4-16 Castle 1 3 F Pin, 1/8x1 1/4 Cotter 1 4 P433 WASHER, 3/4 ID BEARING 1 5 P190 BEARING, 1IN ID TAPERWD ROLLER 2 6 P289 Insert, Brg Race 1 in TRB Brg Spacer, Wheel Yoke Bearing 1 8 F Bolt, 3/8-16x 1 1/4 HH Gr5 6 9 P107 FITTING, 1/4-28 STRAIGHT GREASE 1 10 P191 SEAL,1 1/4 ID TRB BEARING Yoke Wldmt, 2561 Front Wheel 1 12 F Nut, 3/4-10 Stover Swaged 1 13 P296 Spacer, 1.13 OD x 15/16 ID x Wheel Assy, 13x6.50x F Bolt, 3/4-10 x 9 Gr5 HH Wheel Mount Weldmnt (Right on the 2552) 1 17 F Nut, 3/8-16 Hex Nyl Lock Wheel Mount Weldmnt (Left on the 2552) 1 1 NOTE: Items 16 (046494) and 18 (046495) are mirror images of each other. Please double check which part you need to order. 2-6 Lastec Mower/ Drive Unit

19 Drive Unit Front Yoke Assemblies 2 Right Left / Drive Unit Lastec Mower/

20 2 Drive Unit Wheel Assy, 13x6.50x6 2.4 Wheel Assy, 13x6.50x6 REF PART# DESCRIPTION QTY Wheel Assy, 13x6.50x6 1 P293 SEAL,1 1/8 ID TRB BEARING 2 2 P292 BEARING, TAPERED ROLLER 3/4 ID 2 3 P402 Bearing Race Insert, 3/4 TRB 2 4 Not sold seperately 1 5 Not sold separately Lastec Mower/ Drive Unit

21 Drive Unit Wheel Assy, 13x6.50x Drive Unit Lastec Mower/

22 2 Drive Unit Control Box Assembly (Serial Number and later) 2.5 Control Box Assembly (Serial Number and later) REF PART# DESCRIPTION QTY. Control Box Assembly 1 F Screw, 6-32x3/4 SBHC SS Clamp, Blade Switch Mount Switch,Blade Start/Stop Hour Meter, Digital LCD Key for Switch, Ignition Key Decal, Comm Mower Control Panel Gas Control Box Weldmnt, AC Gas w/ Throttle 1 9 F Washer, 5/16 SAE Flat 3 10 F Washer, 5/16 Split Lock 3 11 F Bolt, 5/16-18 x 3/4 HH Light, LED 12VDC Red w/leads 1 13 F Bolt, #10-24x3/8 CrSl PH 3 14 F Washer, #10 Split Lock Plate, Controll Box Access 1 16 F Nut, #6-32 Keps (4 added after Serial Number ) 6 17 E20482 Light, Red 12Volt.187 Tabs (On 2861AGC units only) Plug, 1/2 in Hole (On all other AGC units, except the 2861) Power Outlet, 12V Plug, AS075 Oiltite Painted Black (Parts not sold seperately) Knob, 1 3/8x3/ F Nut, 3/8-16 Hex Nyl Lock 1 22 F Washer, 3/8 Flat SAE Washer, Throttle Friction Handle Wldmt, Throttle Washer Plate, Throttle Friction Washer, Throttle Friction Cable Assy, 2861 Throttle 1 28 F Bolt, #10-24x3/4 CrSl PH 1 29 F Bolt, 3/8-16x1 1/4 Carriage Gr F Nut, 5/16-18 Hex 1 31 F Bolt, 5/16-18 x 1 Gr 5 HH Decal, Control Box Engine Throttle Clamp, Throttle Conduit Lastec Mower/ Drive Unit

23 Drive Unit Control Box Assembly (Serial Number and later) 2 Drive Unit Lastec Mower/

24 2 Drive Unit Control Panel Assembly (Serial Number to ) 2.6 Control Panel Assembly (Serial Number to ) REF PART# DESCRIPTION QTY. Control Box Assembly 1 F Screw, 6-32x3/4 SBHC SS Clamp, Blade Switch Mount Switch,Blade Start/Stop Hour Meter, Digital LCD Switch, Key Gasoline Control Box Weldment 1 7 F Washer, 5/16 SAE Flat 3 8 F Washer, 5/16 Split Lock 3 9 F Bolt, 5/16-18 x 3/4 HH Power Outlet, 12V 1 11 F Nut, #6-32 Keps 4 12 F Nut, #6-32 Hex 2 Not Shown Key for Lastec Mower/ Drive Unit

25 Drive Unit Control Panel Assembly (Serial Number to ) Drive Unit Lastec Mower/

26 2 Drive Unit Control Panel Assembly (Serial Number and prior) 2.7 Control Panel Assembly (Serial Number and prior) REF PART# DESCRIPTION QTY. Panel Assembly, 2561 Control, 1 F Nut, #6-32 Keps Plate, Control Panel Hour Meter, Digital LCD Switch,Blade Start/Stop Switch, Ignition Key Clamp, Blade Switch Mount 2 7 F Screw, 6-32x3/4 SBHC SS Key for F Bolt, 1/4-20x1/2 Sl HH Lastec Mower/ Drive Unit

27 Drive Unit Control Panel Assembly (Serial Number and prior) Drive Unit Lastec Mower/

28 2 Drive Unit Hand Contol Assembly 2.8 Hand Contol Assembly REF PART# DESCRIPTION QTY. Arm Assy, Right Control Handle Arm Assy, Left Control Handle Grip, Handle Arm Wldmt, 2561 Right Control Arm Wldmt, 2561 Left Control 1 3 F Bolt, 3/8-16x1 Gr5 HH 3 4 F Washer, 3/8 Split 3 5 F Washer, 3/8 Flat Block, Drive Handle Mount Rod, Hydro Link 1 8 F NUT, 3/8-24 FREE ROD END, 3/8-24 RIGHT HAND 1 10 F Bolt, 5/16-18x 1 1/2 HH 1 11 F Bolt, 5/16-18x1 1/2 HH 1 12 F Nut, 3/8-16 Half Nylock Bearing, W/Snap Ring 5/8ID 2 14 F /4-28X1/4 Cup Point Set, B/O 2 15 P Collar, 5/8x1-1/8 Lock Znc 2 16 F Nut, 5/16-18 Nyl Lock 1 17 F Bolt, 3/8-16x 1 1/4 HH Gr Pivot Weldment, Control Arms Dampner, Hand Control 1 20 F Nut, 5/16-24 Jam LH Rod End, 5/16-24 Male LH 2 Note: Right and Left Control Handle Arm Assemblies are mirror images of each other with the exception of the Control Arm Weldment, (ref item 2) Lastec Mower/ Drive Unit

29 Drive Unit Hand Contol Assembly 2 Right Left 1 2 Right Left Drive Unit Lastec Mower/

30 2 Drive Unit Emergency Brake Assembly 2.9 Emergency Brake Assembly REF PART # DESCRIPTION QTY. Handle Assy, E-Brake 1 P04211 Knob, 5/8-18 Ball Handle Wldmt, E-Brake 1 3 P786 Bushing, 3/4 ID x 1 OD x 5/8 Lng Flanged 2 4 F Nut, 3/8-16 Hex Nyl Lock 2 5 F Nut, 1/2-13 Nyl Hex Lock 1 6 F Washer, 1/2 SAE Flat Bushing, A-Arm 1 8 F Pin, 3/16x1 Zinc Roll Plate Wldmt, E-Brake Lock Rod Wldmt, E-Brake Tensioner 1 11 P110 Pin, 3/8x1-5/16 Clevis, Yzn Pulley, E-Brake Cable, E-Brake 1 14 F Pin, 3/16 x 1-1/2 Cotter 1 15 F Bolt, 3/8-16X1 1/2 HH Gr5, Znc 2 16 F Nut, 3/8-16 Hex Link, E-Brake Rod Wldmt, Brake Actuator Block, E-Brake Pivot 1 20 P111 Ring, Kick-out, 1in Lastec Mower/ Drive Unit

31 Drive Unit Emergency Brake Assembly Drive Unit Lastec Mower/

32 2 Drive Unit Deck Lift Assembly (Optional) 2.10 Deck Lift Assembly (Optional) REF PART# DESCRIPTION QTY. Lift Assembly, Front End 1 F Bolt, 3/8-16x3 3/4 HH Gr Channel Wldmt, Actuator Mount 1 3 P02575 Boot, Toggle Switch 1 4 F Wire Tie, 14 in Black 3 5 F Washer, 3/8 Flat SAE 2 6 F Nut, 3/8-16 Hex Nyl Lock Wheel, Front End Lift Switch, Toggle 21A DPDT Rev Mom Spade 1 9 P212 Pin, 3/8x2-1/8 Clevis, Yzn Actuator, Front End Lift 1 11 S12284 Tube, 7/8 Dia Elec Motor Spacer 2 12 F Pin, 3/8x2-3/4 Clevis, Yzn Arm Wldmt, Front End Lift 1 14 F Bolt, 1/2-13x1 HH Gr F Washer, 1/2 Split Lock Pin, Front End Lift Pivot 1 17 F Pin, 1/8x1 Cotter 2 18 F Nut, 5/8-11 Nyl Lock 1 19 F Nut, 1/2-13 Half Nylock, Znc 1 20 F BOLT, HEX HEAD 1/2-13x2 1/2 GR5 ZINC 1 21 P04107 Fitting, 3/16x3/16 Straight Grease 1 22 F Washer, 1/2 SAE Flat Bushing, Seat Rubber 1 24 F BOLT, 5/8-11 X 3 HHB GR5 ZINC Lastec Mower/ Drive Unit

33 Drive Unit Deck Lift Assembly (Optional) This is an optional device on all units. To order this unit contact your Lastec Sales representative. Drive Unit Lastec Mower/

34 2 Drive Unit Front Deck Lift Rod Assembly (Serial Number and prior) 2.11 Front Deck Lift Rod Assembly (Serial Number and prior) REF PART# DESCRIPTION QTY Rod Assy, Front Deck Lift 1 F Bolt, 3/8-16x3 3/4 HH Gr5 5 2 F Washer, 3/8 Flat Spring,.72x2.75x.095 Dia SS Comp Handle Wldmt, Deck Raise 1 5 P04211 Knob, 5/8-18 Ball 1 6 F Nut, 3/8-16 Hex Nyl Lock 9 7 F Bolt, 3/8-16x4 HH Gr Plate Wldmt, Deck Height Adjust 1 9 F Bolt, 3/8-16x2 HH Gr Strap. 1 U Spacer, 3/8 x 5/8 x 3/4 Long Rod Wldmt, Front Deck Lift 1 13 F Nut, 3/8-16 Hex 1 14 F Bolt, 3/8-16X1 1/2 HH Gr5, Znc Lastec Mower/ Drive Unit

35 Drive Unit Front Deck Lift Rod Assembly (Serial Number and prior) Drive Unit Lastec Mower/

36 2 Drive Unit Front Deck Lift Rod Assembly (Serial Numbers to present) 2.12 Front Deck Lift Rod Assembly (Serial Numbers to present) REF PART# DESCRIPTION QTY Rod Assy, Front Deck Lift 1 F Bolt, 3/8-16x3 3/4 HH Gr5 4 2 F Bolt, 3/8-16x4 HH Gr Plate Wldmt, Deck Height Adjust Kohler Throttle Cable Assembly (Deleted after serial number ) 1 5 F Bolt, 3/8-16x1 1/4 Carriage Gr5 (Deleted after serial number ) 1 6 F Nut, 3/8-16 Hex Nyl Lock (Deleted after serial number ) 8 7 F Washer, 3/8 Flat Spring,.72x2.75x.095 Dia SS Comp 1 9 F Bolt, 3/8-16X2-1/4 HH Gr5 (Deleted as of serial number ) Strap. 1 U (Serial number and later) Strap. 1 U (Serial number and prior) Clamp, Throttle Conduit (Deleted after serial number ) 1 12 F Bolt, #10-24x1/2 PH (Deleted after serial number ) Washer, Throttle Friction (Deleted after serial number ) Washer Plate, Throttle Friction (Deleted after serial number ) Handle Wldmt, Throttle (Deleted after serial number ) Knob, 1 3/8x3/8-24 (Deleted after serial number ) Washer, Throttle Friction (Deleted after serial number ) 1 18 F Washer, 3/8 SAE Flat (Deleted after serial number ) Handle Wldmt, Deck Raise (Serial number and later) Handle Wldmt, Deck Raise 1 20 P04211 Knob, 5/8-18 Ball Rod Wldmt, Front Deck Lift Rod Wldmt, Front Deck Lift Spacer, 3/8 x 5/8 x 3/4 Long (Deleted as of serial number ) 2 23 F Bolt, 3/8-16x3 1/2 HH Gr5 (Serial number and later) 1 F Bolt, 3/8-16x3 HH Gr5 (Serial number and prior) 1 24 S12284 Tube, 7/8 Dia Elec Motor Spacer 1 25 F Bolt, 3/8-16X1 1/2 HH Gr5, Znc 1 26 F Nut, 3/8-16 Half Nylock (Added as of serial number ) 1 27 F BOLT, 3/8-16X3 1/2 HH GR5 (Added as of serial number ) Bushing, 1" Urethane Pivot (Added after Serial number ) 2 Item 28: Lubricate all mating surfaces with a water-proof axle grease before assembly. CAUTION! Bolts holding urethane bushings must be kept tight. Equipment damage may occur Lastec Mower/ Drive Unit

37 Drive Unit Front Deck Lift Rod Assembly (Serial Numbers to present) 2 Drive Unit Lastec Mower/

38 2 Drive Unit Rear Deck Lift Rod Assembly 2.13 Rear Deck Lift Rod Assembly REF PART# DESCRIPTION QTY Rod Assy, Rear Deck Lift 1 F Bolt, 3/8-16x3 3/4 HH Gr Rod Wldmt, Rear Deck Lift Strap. 1 U (Serial number and later) Strap. 1 U (Serial number and prior) 2 4 F Washer, 3/8 Flat 4 5 F Nut, 3/8-16 Hex Nyl Lock 5 6 F Bolt, 3/8-16x 1 1/4 HH Gr Rod End 3/8-24 Left Hand Spring, 1 3/8x15.8x.187 Ext Mount, Spring 1 10 F Nut, 3/8-24 LH Jam Turnbuckle, Deck lift 1 12 F Nut, 3/8-24 Free Rod End 3/8-24 Right Hand Block, Spring Tensioner Washer, 1/2 In Delrin (Added after serial number ) 1 16 F Washer, 1/2 SAE Flat Gr5-8 (Thru Hard) (Added after serial number ) Rod Wldmt, Spring Tensioner Bushing, 1" Urethane Pivot (Added after Serial number ) 2 Item 18: Lubricate all mating surfaces with a water-proof axle grease before assembly. CAUTION! Bolts holding urethane bushings must be kept tight. Equipment damage may occur Lastec Mower/ Drive Unit

39 Drive Unit Rear Deck Lift Rod Assembly 2 Drive Unit Lastec Mower/

40 2 Drive Unit Framework 2.14 Framework REF PART# DESCRIPTION QTY Cover, Handle Lockout Switch Left 1 2 F Bolt, #10-24x3/8 CrSl PH Switch, DPST NO 5A Plunger 4 4 F Nut, #10-24 Keps 12 5 F Washer, #10 Split Lock 4 6 F Bolt, #10-24x1/2 Sl Pad, 2561 Anti-skid Cover, Handle Lockout Switch Right Cable Assy, 2561 Throttle (Deleted as of Serial Number ) 1 10 F Bolt, #10-24x1/2 Socket BH (Deleted as of Serial Number ) Switch, DPST N/O N/C 1 12 F Bolt, 5/16-18x3/4 HH W/Washer Frame Wldmt, 418 Drive Unit (Not a sellable item) Lastec Mower/ Drive Unit

41 Drive Unit Framework Drive Unit Lastec Mower/

42 2 Drive Unit Framework 1 LASTEC This Page Has Been Intentionally Left Blank 2-30 Lastec Mower/ Drive Unit

43 Hydraulic System 3 SECTION 3 HYDRAULIC SYSTEM Hydraulic System Lastec Mower 2861/

44 3 Hydraulic System Hydraulic Layout Diagram 3.1 Hydraulic Layout Diagram Ref Part # Description Qty Hose assembly, 1/2 x 15-1/2 JIC Hose, 3/8 Hyd x 3-1/4 Low Press Hose, 3/8 Hyd x 6-1/4 Low Press Hose, 5/8 x 21 Suction Hose, 3/8 Hyd x 9-1/2 Low Press Fitting, 3/8 Barb Tee Fitting, 3/8 Hose -5/8 Hose Tee w/bolt Hose Clamp, Dixon Worm Gear HSS6 6 Hydraulic Mainentance Kits Kit # Part # Description Qty Kit, Hydro Oil Repl 5 Gal Oil, TTF_SB 5 gal Box, Cube-Itainer 5 gal plastic liner Filter, Hyd 25 Micron Kit, hydro Oil Repl 2-1/2 Gal Oil, TTF_SB 2.5 gal Box, Cube-Itainer 2.5 gal plastic liner Filter, Hyd 25 Micron Oil,TTF-SB 32oz Bottle Hydro Oil, TTF_SB 1 qt Decal, Hydraulic TTF-SB Oil Black Cap, for 32oz Bottle Oil Container Bottle, 32oz Container for Oil Spout Cap/ W Red Seal for 32oz Container SealKit, Hydro-Gear BDP (Seal Kit for Pumps) Lastec Mower 2861/ Hydraulic System

45 Hydraulic System Hydraulic Layout Diagram Pump Pump Motor Motor 8 8 Tank 4 Suction Line 5 Return Line Hydraulic System Lastec Mower 2861/

46 3 Hydraulic System Hydraulic Pump (Left Shown) 3.2 Hydraulic Pump (Left Shown) REF PART# DESCRIPTION QTY. Pump Assy, 2561 Right Hydro Pump Assy, 2561 Left Hydro Belt, BX Bushing, 15MM Split Taper Bolts, sold with the bushing KEY, 5MMx5MMx25MM (Serial Number and later) 1 P725 Key, 5mmX5mmX3/4in (Serial Number and prior) Sheave, 6 OD B Section Actuator Kit (parts not sold separately) 1 7 F Bolt, 3/8-16X1 1/2 HH Gr5, Znc 2 8 F Bolt, 5/16-18x1 3/4 HH (Serial Number and later) 1 F Bolt, 5/16-18x1 1/2 HH (Serial Number and prior) 1 9 F Washer, 3/8 Flat 2 10 F Nut, 3/8-16 Hex Nyl Lock Hose, 3/8 Hyd x 6-1/4 Low Press P12739 Clamp, 11/16 Worm (Serial Number and later) Clamp, 3/8 Hose (Serial Number and prior) 2 13 P12722 FITTING, HYDR. #6 ELBOW #6 HOSE BARB Fitting, #8 SAE x 3/8 Hose Str Hose, 3/8 Hyd x 3-1/4 Low Press Pump, BDP-10A-451 (LEFT PUMP) Pump, BDP-10A-327 (RIGHT PUMP) Fitting, #8 SAE-#8 JIC - 90 EL Hose Assy, 1/2 x 15-1/2 JIC 2 Left and Right units are mirror images of each other. 3-4 Lastec Mower 2861/ Hydraulic System

47 Hydraulic System Hydraulic Pump (Left Shown) Hydraulic System Lastec Mower 2861/

48 3 Hydraulic System Hydraulic Motor, Right 3.3 Hydraulic Motor, Right REF PART# DESCRIPTION QTY. Wheel/Motor Assy, 2561 Right Rear 1 P193 Pin, 5/32x1 3/4 Cotter NUT Nut, 1-20 Castle Hydro-Gear 1 3 F Nut, 5/16-18 Nylon Locking Jam 1 4 F Washer, 5/16 Standard Flat 1 5 F Bolt, 5/16-18x3/4 HH Gr5 Zinc Plate, E-brake Pulley Right (Serial Number and later) Plate, E-brake Pulley Right (Serial Number and prior) Pulley, E-Brake 1 8 F Bolt, 3/8-16x1 HH Motor, Hydro-Gear 1 10 F Washer, 1/2 SAE Flat Gr5-8 (Thru Hard) 6 11 F Nut, 1/2-13 Nyl Hex Lock 4 12 F Bolt, 5/16-18x3/4 SHC SS 4 13 F Washer, 5/16 Split Lock 4 14 F Bolt, 1/2-13x5 1/2 Hex Head GR5 Zinc 4 15 F Bolt, 3/8-16x 1 1/4 HH Gr5 (Serial Number and later) 1 F Bolt, 3/8-16x1 HH (Serial Number and prior) Key, Hydro Gear 1 17 P798 FITTING, 90DEG JICX7/8 OR STEEL 2 18 F Washer, 3/8 Flat SAE (Added after serial Number ) Plate, E-brake Cable Retaining (Added after serial Number ) 1 20 F Washer, Shim 1 in IDx.06 SS As needed 21 F Washer, Shim 1 in IDx.03 SS As needed 22 P04646 Nut, 1/2-20 Lug 5 Make sure pulley spins freely. Motor comes with castle nut and key. 3-6 Lastec Mower 2661/ Hydraulic System

49 Hydraulic System Hydraulic Motor, Right 3 1 Torque to 144 ft-lbs Hydraulic System Lastec Mower 2661/

50 3 Hydraulic System Hydraulic Motor, Left 3.4 Hydraulic Motor, Left REF PART# DESCRIPTION QTY. Wheel/Motor Assy, 2561Left Rear 1 F Nut, 1/2-13 Nyl Hex Lock F Washer, 1/2 SAE Flat Gr5-8 (Thru Hard) Motor, Hydro Gear Plate, E-brake Pulley Left (Serial Number and later) Plate, E-brake Pulley Left (Serial Number and prior) 1 5 F Bolt, 1/2-13x5 1/2 Hex Head GR5 Zinc Pulley, E-Brake 3 7 F Nut, 3/8-16 Half Nylock 2 8 F Bolt, 5/16-18x3/4 HH Gr5 Zinc 1 9 F Washer, 5/16 Standard Flat 1 10 F Nut, 5/16-18 Nylon Locking Jam 1 11 P193 Pin, 5/32x1 3/4 Cotter Key, 5/16 X 1 Woodruff 1 13 F Bolt, 3/8-16x2 HH Gr5 (Serial Number and later) 1 F Bolt, 3/8-16X1 1/2 HH Gr5, Znc (Serial Number and prior) 1 14 P798 FITTING, 90DEG JICX7/8 OR STEEL 2 15 F Bolt, 3/8-16x 1 1/4 HH Gr5 (Serial Number and later) 1 F Bolt, 3/8-16x1 HH (Serial Number and prior) 1 16 F Washer, 5/16 Split Lock 4 17 F Bolt, 5/16-18x3/4 SHC SS NUT Nut, 1-20 Castle Hydro-Gear 1 19 F Washer, 3/8 Flat SAE( Added after serial Number ) Plate, E-brake Cable Retaining (Added after serial Number ) 3 21 F Washer, Shim 1 in IDx.06 SS As needed 22 F Washer, Shim 1 in IDx.03 SS As needed 23 P04646 Nut, 1/2-20 Lug 5 1 Two F added to front of Ebrake plate to prevent slight damage from bolt. Make sure all pulleys spin freely. Motor comes with castle nut and key. 3-8 Lastec Mower 2661/ Hydraulic System

51 Hydraulic System Hydraulic Motor, Left 3 Torque to 144 ft-lbs Hydraulic System Lastec Mower 2661/

52 3 Hydraulic System Brake Assembly and Wheel 3.5 Brake Assembly and Wheel REF PART# DESCRIPTION QTY. Brake Assy, 3377TZ Rear Drum 1 P04646 Nut, 1/2-20 Lug Rim, 12 x 8-1/2 8 Spoke 4-1/2 BC Drum, 3377TZ Brake Stud, 1/2-20 x 1-1/4 Press In Shoe, x 25 Brake Spring, x 25 Brake Return Cam, x 25 Brake Backing Plate, x 25 Brake Arm, x 25 Brake Actuator Clip, x 25 Retainer Tire, 24x12-12 (Tire Only) 1 If ordering both the tire and the rim together, order part number , Tire Assembly, 24x12-12 woffset Rim Lastec Mower 2861/ Hydraulic System

53 Hydraulic System Brake Assembly and Wheel Hydraulic System Lastec Mower 2861/

54 3 Hydraulic System Hydraulic Tank (A) 3.6 Hydraulic Tank (A) REF PART# DESCRIPTION QTY. Tank Assy, 28HP Hyd 1 F Bolt, 1/4-20x5/8 HH GR5 2 2 F Washer, 1/4 Split Lock Plate, Fuel Switch 1 4 F Bolt, 3/8-16x1 Gr5 HH (Serial Number and later) 3 F Bolt, 3/8-16x1 HH (Serial Number and prior) 4 5 F Washer, 3/8 Flat Elbow, 1/2NPT 90 Brass Nipple, 1/2 NPT Hex Manifold, Hyd w/filter FTG, 1/2 NPT-5/8 BARB 90 EL, Stl 1 10 P12739 Clamp, 11/16 Worm (Serial Number and later) Clamp, 5/8 Hose (Serial Number and prior) Hose, 5/8 x 21 Suction Valve, Two Tank Diverter Cap, Hyd Tank W/Dipstick 1 14 Deleted as of (Serial Number and later) 0 F Nut, 1/4-20 Keps (Serial Number and prior) 1 15 P07584 Clamp, 1/2EMT Coated (Serial Number and later) Cable Clamp,.375 Coated 1/4" Mo 1 16 Deleted as of (Serial Number and later) 0 F Screw, 1/4-20x3/4 FT HHC (Serial Number and prior) 1 17 F Nut, 3/8-16 Hex Nyl Lock (Deleted after ) Fitting, 3/8NPT Street Tee Plug, 3/8 NPT Hex Brass Tank Wldmt, 2561 Hyd 1 Continued in next section Lastec Mower 2861/ Hydraulic System

55 Hydraulic System Hydraulic Tank (A) Hydraulic System Lastec Mower 2861/

56 3 Hydraulic System Hydraulic Tank (B) 3.7 Hydraulic Tank (B) REF PART# DESCRIPTION QTY. Tank Assy, 28HP Hyd Filter, Hyd 25 Micron 1 22 P12724 Fitting, 3/8NPT-3/8 Barb 1 23 P12739 Clamp, 11/16 Worm (Serial Number and later) Clamp, 3/8 Hose (Serial Number and prior) Hose, 3/8 Hyd x 9-1/2 Low Press F Bolt, 3/8-16x 2-1/2 HH Gr5 (Deleted after ) Spring,.72 x2.75x.095 Dia SS Comp (Deleted after ) F Nut, #10-24 Keps Switch, DPST N/O N/O 1 29 F Bolt, #10-24x3/4 CrSl PH 2 30 P12708 Fitting, 3/8NPT-3/8 Barb Elbow (Added after serial number ) 2 31 P649 Hose Clamp, 7/32IN-5/8IN (Added after serial number ) Tube, Vinyl Site Gage (Added after serial number ) 1 33 F Bolt, 3/8-16x 1 1/4 HH Gr5 (Changed after serial number ) 1 34 F Nut, 3/8-16 Half Nylock (Changed after serial number ) Lastec Mower 2861/ Hydraulic System

57 Hydraulic System Hydraulic Tank (B) Hydraulic System Lastec Mower 2861/

58 3 Hydraulic System Hydraulic System Idler 3.8 Hydraulic System Idler REF PART# DESCRIPTION QTY. Idler Assy, Hydro 1 F Nut, 1/2-13 Nyl Hex Lock Bar, Hydro Idler 1 3 F Washer, 3/8 Flat Pulley, 5 In OD Idler 1 5 F NUT, 1/2-13 FREE HEX, ZINC 1 6 P09426 Spring, Manual Turner 1 7 F BOLT, 1/2-13X4 1/2 HEX HD FULL THRD, ZNc Lastec Mower 2861/ Hydraulic System

59 3 Hydraulic System Hydraulic System Idler 3-17 Lastec Mower 2861/ Hydraulic System

60 3 Hydraulic System Hydraulic System Idler 3-18 Lastec Mower 2861/ Hydraulic System

61 Engine And Battery Box 4 SECTION 4 ENGINE AND BATTERY BOX Engine And Battery Box Lastec Mower 2861/

62 4 Engine And Battery Box Fuel Tank (Before Serial Number ) 4.1 Fuel Tank (Before Serial Number ) REF PART# DESCRIPTION QTY Tank Assembly, 28HP Fuel Cap, Fuel Tank w/indicator 3 1/2" 1 2 F Screw, 10-24x5/8 Unsl Indent HH Machine 2 F Rivet, 1/8x 1/2Self Sealing Plate, Fuel Decal Fitting, 1/4 Barb 90 Tank Grommet, Fuel Tank Fitting Grommet, Rubber 2 1/2 Dia Washer, Fuel Tank Retaining Cap, Hyd Tank (P631) Washer, Fuel Tank Double Tubing, 1/4 x 17 In. Tygon Tubing, 1/4 x 2in Long Tygon Filter, 1/4 Barb Tank Filter Fuel tank 1 1 Parts , , and are internal to the tank Lastec Mower 2861/ Engine And Battery Box

63 Engine And Battery Box Fuel Tank (Before Serial Number ) Engine And Battery Box Lastec Mower 2861/

64 4 Engine And Battery Box Fuel Tank (After Serial Number ) 4.2 Fuel Tank (After Serial Number ) REF PART# DESCRIPTION QTY F Tank Assy, 28HP Fuel Cap, 3-1/2 Fuel Tank 1 2 F Screw, 10-24x5/8 Unsl Indent HH Machine 2 3 F Washer, #10 Split Lock Grommet, Rubber 2 1/2 Dia Washer, Fuel Tank Retaining Cap, Hyd Tank (P631) Washer, Fuel Tank Double Gage, Fuel Indicator Grommet, Fuel Gage Plate, Fuel Decal Fitting, 1/4 Barb 90 Tank Grommet, Fuel Tank Fitting Tube, Fuel Pick Up Tubing, 1/4 x 2in Long Tygon Tank Assembly, Fuel, Dual FIttings Lastec Mower 2861/ Engine And Battery Box

65 Engine And Battery Box Fuel Tank (After Serial Number ) 4 Engine And Battery Box Lastec Mower 2861/

66 4 Engine And Battery Box Fuel System 4.3 Fuel System REF PART# DESCRIPTION QTY. Fuel System 1 P649 Hose Clamp, 7/32IN-5/8 (Serial number and later) Clamp, 1/4 Hose (Serial number and prior) Hose, Fuel 1/4 In x 16 (After serial number ) Hose, 1/4 x 14 Fuel Hose, Fuel 5/16 In x 10 3/4 1 4 P649 Hose Clamp, 7/32IN-5/ P09895 Clamp, Worm, 2 1/ Filter,Kolher Fuel Hose, Fuel 5/16 In x 23 3/ Hose, Fuel 1/4 In x 6 3/4 1 9 F Nut, #10-24 Keps Pressure, Regulator 28HP Kohler 1 11 F Bolt, #10-24x5/8 HH Hose, Fuel 5/16 In x 24 3/ P07584 Clamp, 1/2EMT Coated Hose, Fuel 1/4 In x 32" (After serial number ) Hose, Fuel 1/4 In x Hose, Fuel 5/16 In x 8 1/ Strap, Fuel Pump Mount Pump, Kohler Fuel, 28HP Filter, Fuel 5/ Hose, Fuel 5/16 In x 37 1/ Valve, Two Tank Diverter (See Hydraulic Tank in Section 3) Lastec Mower 2861/ Engine And Battery Box

67 Fuelsystem Engine And Battery Box Fuel System Engine And Battery Box Lastec Mower 2861/

68 4 Engine And Battery Box Engine Assembly 4.4 Engine Assembly REF PART# DESCRIPTION QTY Engine, 28HP Kohler 2861 Spec Dipstick, Kohler 28HP Cap, Oil Fill Kohler 28HP 1 3 F Bolt, M8x1.25x1 HH FT Coil, Ignition Kohler 28HP Filter, Oil, Kohler 28HP 1 6 F Nut, 5/16-24 Jam Starter, Kohler 28HP 1 8 F Bolt, 3/8-16x3 1/2 Hex Head GR8 Zinc Screen, Grass Kohler 28HP 1 Not shown Plug, Spark, Kohler 28HP 2 Not shown Module, Electronic Ignition Control 1 Not Shown Regulator, Overvolt Kohler 28HP Lastec Mower 2861/ Engine And Battery Box

69 Engine And Battery Box Engine Assembly Engine And Battery Box Lastec Mower 2861/

70 4 Engine And Battery Box Clutch Guard Assembly 4.5 Clutch Guard Assembly REF PART# DESCRIPTION QTY Guard Assy, Clutch 1 F Bolt, 3/8-16x2 SHC Zinc (Serial Number and later) 1 F Bolt, 3/8-16x2 SHC BO (Serial Number and prior) Knob, 3/8 Bore Oval/Tapered Plastic Guard Wldmt, Clutch 1 4 F Nut, 3/8-16 Hex Nyl Lock 3 5 F Bolt, 3/8-16X1 3/4 HH Gr5, Znc Spring, 1 1/8x7 1/2x.091 Ext 1 7 F Nut, #10-24 Hex Self-Locking 2 8 P06104 Foot, Rubber 2 9 F Bolt, #10-24x1/2 Socket BH Lastec Mower 2861/ Engine And Battery Box

71 Engine And Battery Box Clutch Guard Assembly Engine And Battery Box Lastec Mower 2861/

72 4 Engine And Battery Box Clutch Assembly 4.6 Clutch Assembly REF PART# DESCRIPTION QTY Engine Assembly, 28HP 1 F Bolt, 7/16-20x1 1/2 HH Gr5 1 2 F Washer, Split Lock 7/16 Zinc Shaft Washer, Gas Clutch (Serial Number and later) Washer,.52x Clutch, Ogura Belt, B116 Wrapped Spacer, Clutch Sheave, BK60x1 1/8 1 8 F NUT, 7/16-20 NYL HEX Plate, Clutch Anti-Spin 1 10 F Bolt, 7/16-20x1 HH Gr F Bolt, 3/8-16UNF-2A x 1-3/4 Gr Hose Assy, 3/8 x 14-1/ P04332 Cap, 3/8 Pipe Galvanize 1 14 F Nut, 3/8-16 Hex Nyl Lock 4 15 F Washer, 3/8 Flat Key, 1/4 SQ x 3 3/8 Long 1 17 F Bolt, 1/4-20x3/4 FT HHC (Serial Number and later) 1 18 P07584 Clamp, 1/2 EMT Coated (Serial Number and later) 1 19 F Washer, 1/4 SAE Flat (Serial Number and later) 1 20 F Nut, 1/4-20 Keps (Serial Number and later) 1 1 Serial number and prior Contained two spacers placed between the sheave and the clutch Lastec Mower 2861/ Engine And Battery Box

73 Engine And Battery Box Clutch Assembly Engine And Battery Box Lastec Mower 2861/

74 4 Engine And Battery Box Motor Mount and Drive Belt Idler (Serial Number and prior) 4.7 Motor Mount and Drive Belt Idler (Serial Number and prior) REF PART# DESCRIPTION QTY Idler Assy, Deck Drive 1 F Washer, 5/8 SAE Flat Bushing, Tensioner Boss Wldmt, Rubber Spring Tensioner 1 4 F Pin, 3/4 In Clevis Retaining (Serial Number and later) 1 F Pin, 3/16 Dia Lynch (Serial Number and prior) 1 5 F PIN, 3/16X1 COTTER, ZN Plate Wldmt, Deck Drive Idler 1 7 F Nut, 1/2-13 Nyl Hex Lock Spring Swivel Hook Extension (Serial number and later) Spring, 1 1/2ODx8 1/2x.192 Ext. (Serial number and prior) Pulley, 5 IN OD V-Groove Idler 2 10 P786 Bushing, 3/4 ID x 1 OD x 5/8 Lng Flanged 2 11 F Washer, 1/2 SAE Flat 2 12 F Bolt, 1/2-13 x 2-1/4 HexHead GR5 (Serial Number and later) 2 F Bolt, 1/2-13 x 2 HHB (Serial Number and prior) 2 13 F Bolt, 3/8-16x3 3/4 HH Gr Mount Wldmt, Engine 1 15 F Nut, 3/8-16 Hex Nyl Lock 4 16 P294 FITTING, 1/ DEG GREASE (Serial Number and later) 1 P107 FITTING, 1/4-28 STRAIGHT GREASE (Serial Number and prior) 1 17 F Washer, 3/8 Flat SAE (Added after serial number ) Guard, Right Hydro Fan 1 19 F Bolt, 5/16-18x3/4 HH W/Washer Lastec Mower 2861/ Engine And Battery Box

75 Engine And Battery Box Motor Mount and Drive Belt Idler (Serial Number and prior) 4 Engine And Battery Box Lastec Mower 2861/

76 4 Engine And Battery Box Motor Mount and Hardware (Serial Number and later) 4.8 Motor Mount and Hardware (Serial Number and later) REF PART# DESCRIPTION QTY. Idler Assy, Deck Drive 1 F Bolt, 3/8-16x3 3/4 HH Gr5 4 2 F Washer, 3/8 Flat SAE 4 3 F Nut, #10-24 Keps 3 4 P07584 Clamp, 1/2EMT Coated 1 5 F Screw, 10-24x5/8 Unsl Indent HH Machine Mount Wldmt, Engine Module, Eletronic Ignition Control 1 8 F Screw, 10-24x2 HH 2 9 F Nut, 3/8-16 Hex Nyl Lock 4 10 P284 FITTING, 1/ DEG. GREASE 1 11 F Nut, 1/2-13 Nyl Hex Lock Pulley Assy, 5In OD Idler 1 F Ring, 62MM IR 2 P103 Bearing, Spindle Top 6305 RS Pulley, 5 OD Idler Boss, Idler Pulley Standoff 1 13 F Washer, 1/2 SAE Flat 1 14 F Bolt, 1/2-13x2 1/4 Hex Head GR Guard, Right Hydro Fan 1 16 F Bolt, 5/16-18x3/4 HH W/Flat&Lock Washer 1 1 Pulley may be purchased as an assembly or individual parts Lastec Mower 2861/ Engine And Battery Box

77 Engine And Battery Box Motor Mount and Hardware (Serial Number and later) Engine And Battery Box Lastec Mower 2861/

78 4 Engine And Battery Box Drive Belt Idler (Serial Number and later) 4.9 Drive Belt Idler (Serial Number and later) REF PART# DESCRIPTION QTY. Idler Assy, Deck Drive Spring, Urethane 1 2 F Washer, 1/2 SAE Flat 1 3 F Nut, 1/2-13 Nyl Hex Lock 2 4 F PIN, 3/16X1 COTTER, ZN 1 5 F Washer, 5/8 SAE Flat Bushing, Tensioner Boss Wldmt, Rubber Spring Tensioner Pulley Assy, 5In OD Idler 1 8a F Ring, 62MM IR 2 8b P103 Bearing, Spindle Top 6305 RS 1 8c Pulley, 5 OD Idler 1 8d Boss, Idler Pulley Standoff 1 9 F Bolt, 1/2-13x2 1/4 Hex Head GR Plate Wldmt, Deck Drive Idler 1 11 P786 Bushing,3/4IDx1 ODx5/8 Lng Flgd 2 12 F Pin, 3/4 In Clevis Retaining 1 13 F Washer, 1/2 Standard Flat Lastec Mower 2861/ Engine And Battery Box

79 Engine And Battery Box Drive Belt Idler (Serial Number and later) 4 8a 8b 8c 8d 8a Engine And Battery Box Lastec Mower 2861/

80 4 Engine And Battery Box Air Intake Assembly 4.10 Air Intake Assembly REF PART# DESCRIPTION QTY. 28HP Air Intaker Assembly Hose, Air Intake Hood, Rain 1 3 P09895 Clamp, Worm, 2 1/ Housing Cover, Kohler Filter Plug,Kohler Filter Minder Plate, Air Cleaner Mount 1 7 F Bolt, 5/16-18 x 3/4 HH Air Filter, Inner Element Air Filter, Primary Element Housing Cap, Kohler Filter Bracket, Kohler Air Filter Mounting 1 12 F Nut, 5/16-18 Nyl Lock 2 13 F Washer, Split Lock 7/16 Zinc 2 14 F Bolt, 7/16-14x1 1/4 HH Gr Lastec Mower 2861/ Engine And Battery Box

81 Engine And Battery Box Air Intake Assembly Engine And Battery Box Lastec Mower 2861/

82 4 Engine And Battery Box Exhaust 4.11 Exhaust REF PART# DESCRIPTION QTY Cage, Guard with bolts Bolt, Cage Guard Muffler Bracket 1 5 F Nut, M8x1.25 Hex Jam Heat Shield Bolt, Heat Shield O2 Sensor Nut, Muffler Gasket, Muffler Lastec Mower 2861/ Engine And Battery Box

83 Engine And Battery Box Exhaust exhaust Engine And Battery Box Lastec Mower 2861/

84 4 Engine And Battery Box Battery Box 4.12 Battery Box REF PART# DESCRIPTION QTY. Battery Assy, F Bolt, 5/16-18x8-1/2 HH Gr Angle, Battery Hold Down 1 3 P12161 Washer, Felt Battery Terminal Battery, 12V 524/26A (After serial number ) Battery, 12V 426A 1 5 F Nut, 5/16-18 Nyl Locing Jamk Lastec Mower 2861/ Engine And Battery Box

85 Engine And Battery Box Battery Box Engine And Battery Box Lastec Mower 2861/

86 4 Engine And Battery Box Battery Box 1 LASTEC This Page Has Been Intentionally Left Blank 4-26 Lastec Mower 2861/ Engine And Battery Box

87 Decks 5 SECTION 5 DECKS Decks Lastec Mower 2861/

88 5 Decks Deck Framework 5.1 Deck Framework REF PART # DESCRIPTION QTY. 1 F Nut, 3/8-16 Half Nylock 4 2 F Nut, 3/8-16 Wing Guard, Left Deck 1 4 F Bolt, 3/8-16x5/8 HH Gr5 1 5 F Washer, 3/8 Split Block, Belt Slap Bumper, Table (Deleted after Serial Number ) Guard, Right Deck 1 9 F Nut, 3/8-16 Hex Nyl Lock 1 10 F Nut, 1/2-13 Nyl Hex Lock 1 11 F NUT, 1/2-13 FREE HEX, ZINC Deck Wldmt, F Bolt, 1/2-13x2 HHFT GR5 Znc Lastec Mower 2861/ Decks

89 Decks Deck Framework Decks Lastec Mower 2861/

90 5 Decks Deck Mounting Hardware 5.2 Deck Mounting Hardware REF PART # DESCRIPTION QTY. 1 F Pin, 3/8x1 3/32 Clevis Link, Front Deck Lift (Serial Number and later) Link, Front Deck Lift (Serial Number and prior) 3 3 P111 Ring, Kick-out, 1in Link, Front Right Deck Lift (Serial Number and later) Link, Front Right Deck Lift (Serial Number and prior) 1 5 F Bolt, 3/8-16x1 HH 1 6 F Washer, 3/8 Split Pin Wldmt, Deck Push Arm Bar Wldmt, Left Push Arm 1 9 F BOLT, HEX HEAD 5/8-11x2 3/4 GR5 ZINC 3 10 P05060 Fitting, 1/4-28 Grease 4 11 F Nut, 5/8-11 Nyl Lock Bar Wldmt, Right Deck Push Arm 1 13 F Nut, 3/8-16 Hex Nyl Lock (Added after serial number ) 3 14 F Washer, 3/8 Flat SAE (Added after serial number ) Plate, 2861F Bolt In Mulching (Added after serial number ) 1 16 F Bolt, 3/8-16x1 Carriage (Added after serial number ) Lastec Mower 2861/ Decks

91 Decks Deck Mounting Hardware 5 Decks Lastec Mower 2861/

92 5 Decks Spindle Housing Assembly 5.3 Spindle Housing Assembly REF PART # DESCRIPTION QTY. Spindle Assembly w/stiffener 1 F Bolt, 5/16-18 x 1 1/4 Gr 5 HH 6 2 F Washer, 5/16 Split Lock Plate, Deck Reinforcing Seal, 2561 Spindle Collar, Spindle Top 1 6 P11035 Bearing, RS Housing, Spindle 1 8 F Pin, 1/8x1/2 Roll Spacer, Spindle Bearing 1 10 F Ring, 2 1/2IDx3/16 Dia Rubber O Washer, 1.50x1.185x16Ga Washer, 2.435x1.185x11Ga Shaft, Blade Spindle Right and Left Spindles Assemblies Shaft, Center Blade Spindle 5-6 Lastec Mower 2861/ Decks

93 Decks Spindle Housing Assembly Note: Shaft part number is different for center and side spindles Decks Lastec Mower 2861/

94 5 Decks Single Pulley Spindles 5.4 Single Pulley Spindles REF PART # DESCRIPTION QTY. Spindle Assy, 2561 Single Sheave 1 P04107 Fitting, 3/16x3/16 Straight Grease Bolt, Spindle Single Pulley 1 3 F Washer, 1/2IDx1 5/8OD Bellville Sheave, Single Mower 1 5 S04124 Key, 1/4 x 1 11/ see Spindle Housing Assembly 7 P128 Blade, 21 x 2-1/2 x 1/4 High Lift 1 P246 Blade, 21 x 2-1/2 x 1/4 Low Lift (Optional) 1 P322 Blade, 21 x 2-1/2 x 1/4 "Gator" Mulching (Optional) Washer, 2-1/2x11/16x3/16 Nylon 1 9 F Washer, 2-1/2 ODx5/8 IDx3/16 Zn 1 10 F Bolt, 5/8-18x1 1/2 HH FT Lastec Mower 2861/ Decks

95 Decks Single Pulley Spindles Decks Lastec Mower 2861/

96 5 Decks Double Pulley Spindle 5.5 Double Pulley Spindle REF PART # DESCRIPTION QTY. Spindle Assy, 2561 Double Sheave 1 P04107 Fitting, 3/16x3/16 Straight Grease Bolt, Spindle Single Pulley (Serial number and later) Bolt, Spindle Double Pulley (Serial number and earlier) 1 3 F Washer, 1/2IDx1 5/8OD Bellville Key, 1/4 x 2 1/ Sheave, Double Mower 1 6 see Spindle Housing Assembly 7 P128 Blade, 21 x 2-1/2 x 1/4 High Lift 1 P246 Blade, 21 x 2-1/2 x 1/4 Low Lift (Optional) 1 P322 Blade, 21 x 2-1/2 x 1/4 "Gator" Mulching (Optional) Washer, 2-1/2x11/16x3/16 Nylon 1 9 F Washer, 2-1/2 ODx5/8 IDx3/16 Zn 1 10 F Bolt, 5/8-18x1 1/2 HH FT Lastec Mower 2861/ Decks

97 Decks Double Pulley Spindle 5 Maximum torque 57 ft-lbs Torque 75 ft-lbs 9 10 Decks Lastec Mower 2861/

98 5 Decks Tensioner Assembly 5.6 Tensioner Assembly REF PART # DESCRIPTION QTY. Tensioner Assy, 2561 Deck 1 F Nut, 1/2-13 Nyl Hex Lock 1 2 F Washer, 1/2 SAE Flat PULLEY, IDLER FLAT Spring, 1 1/2ODx8 1/2x.192 Ext Plate Wldmt. Idler Belt, B-128 Deck Drive (Serial Number and later) Belt, BX128 (Serial Number and prior) 1 7 F Bolt, 3/8-16x1 HH 2 8 P04107 Fitting, 3/16x3/16 Straight Grease Slide Wldmt, Deck Idler 1 10 F Nut, 3/8-16 Hex Nyl Lock 2 11 F Bolt, 5/16-18x1 Nylon Lastec Mower 2861/ Decks