MAXI-LITE ML 15/ML 20 SERIES LIGHT TOWER PARTS MANUAL ALLMAND BROS. INC P.O. BOX 888 HOLDREGE, NE 68945

Transcription

1 Maxi-Lite ML 15/ML 20 MAXI-LITE ML 15/ML 20 SERIES LIGHT TOWER PARTS MANUAL ALLMAND BROS. INC P.O. BOX 888 HOLDREGE, NE PHONE: 308/ , 1-800/ ALLMAND FAX: 308/ ALLMAND PARTS FAX: 308/ ML 15/ML 20 SERIES * Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red For Parts and Updates visit Allmand on the Web at IPL

2

3 Contents SHO 1000 HIGH PRESSURE SODIUM LAMP...4 SHO 1000 METALLIC VAPOR LAMP...5 MANUAL WINCH TOWER ASSEMBLY...6 MANUAL WINCH TOWER CABLE ROUTING...8 ELECTRIC WINCH, STRAIGHT CORD TOWER ASSEMBLY...10 ELECTRIC WINCH TOWER CABLE ROUTING LIGHT REMOVABLE LIGHT BAR ASSEMBLY LIGHT REMOVABLE LIGHT BAR ASSEMBLY...14 AXLE ASSEMBLY, HITCH ASSEMBLY AND TONGUE JACK...16 TAILLIGHTS, DOOR PROPS AND OUTRIGGER LOCKS...18 BATTERY, CABLES, AND GROUND STRAP...20 KUBOTA V2203 ENGINE/GENERATOR SET...22 ISUZU 4LE ENGINE/GENERATOR SET...24 KUBOTA RADIATOR AND MOUNTING PLATE...26 ISUZU RADIATOR MOUNTING PLATE LIGHT BALLAST ASSEMBLY LIGHT AC GAUGE PANEL ASSEMBLY...32 ISUZU 4-LIGHT AC GAUGE PANEL ASSEMBLY...34 MANUAL WINCH AND TOWER SUPPORT ASSEMBLY...36 ELECTRIC WINCH, SLACK LIMIT SWITCH, AND TOWER SUPPORT...38 FUEL TANK ASSEMBLY...40 RIGHT QUARTER PANEL ASSEMBLY...42 KUBOTA ENGINE DC GAUGE PANEL ASSEMBLY...44 ISUZU ENGINE DC GAUGE PANEL ASSEMBLY...46 RIGHT ROOF PANEL ASSEMBLY...48 LEFT ROOF PANEL ASSEMBLY...50 RIGHT DOOR PANEL ASSEMBLY...52 LEFT DOOR PANEL ASSEMBLY...54 LEFT PLASTIC FRONT PANEL ASSEMBLY...56 RIGHT PLASTIC FRONT PANEL ASSEMBLY...58 OUTRIGGERS AND REAR JACK MOUNT ASSEMBLY...60 REAR OUTLET PANEL ASSEMBLY...62 REAR DOOR AND PANEL ASSEMBLY...64 LICENSE PLATE HOLDER ASSEMBLY...66 DECAL PLACEMENT KUBOTA V2003T and V ISUZU 4LE KUBOTA ENGINE/GENERATOR SET ELECTRICAL...82 ISUZU 4LE1 ENGINE ELECTRICAL...83 BALLAST ASSEMBLY, 4-LIGHT CSA...84 BALLAST ASSEMBLY, 6-LIGHT CSA...85 OUTLET ASSEMBLY CSA 15KW WITH EXTRA 50A RECEPTACLE...86 OUTLET ASSEMBLY CSA 20KW WITH EXTRA 50A RECEPTACLE...87 LAMP SOCKET/BALLAST COMPARTMENT WIRING, 4-LIGHT TAILLIGHT WIRING HARNESS...89 DUTTON-LAINSON STRONG ARM WINCH SCHEMATIC...90 LIMITED WARRANTY...91

4 A-1A SHO 1000 METALLIC VAPOR LAMP SHO 1000 HIGH PRESSURE SODIUM LAMP 4 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

5 SHO 1000 METALLIC VAPOR LAMP SHO 1000 HIGH PRESSURE SODIUM LAMP A-1B NS LAMP HOLDER ASS Y WITH YOKE AND LAMP (SOLID MT.) (REM. FIXTURES) NS LAMP HOLDER ASS Y WITH YOKE AND LAMP (SOLID MT.) (HPS) NS LAMP HOLDER ASSEMBLY W/YOKE, LAMP AND CUSHIONS (CUSHION MT.) NS LAMP HOLDER ASSEMBLY W/YOKE, LAMP AND CUSHIONS (CUSHION MT.) (HPS) NS LAMP HOLDER ASSEMBLY WITH YOKE AND LAMP NS LAMP HOLDER ASSEMBLY WITH NO YOKE, NO LAMP,s HPS ALUMINUM RING LAMP BT-37 2A LAMP 1000W SHO ED37 (HPS) 3 2 ** #8 WASHER (STAINLESS STEEL) 4 2 ** #8-32 NC X 1/2 HEX HEAD BOLT (STAINLESS STEEL) #10-24 NC X 1/2 HEX HEAD BOLT (STAINLESS STEEL) #10 INTERNAL TOOTH WASHER ALUMINUM PLATE #8-32 NC NYLON INSERT NUT (STAINLESS STEEL) LAMP TIP SUPPORT NS LAMP TIP SUPPORT (HIGH PRESSURE SODIUM) LAMP TIP SUPPORT TUBE CERAMIC SOCKET REFLECTOR END HOUSING GASKET RH SOLID END CASTING /8-24 NF NYLON INSERT NUT OD x.385 ID x.20 NYLON WASHER /8-24 NF X 3/8-16 NC X 2" STUD SOLID MOUNT YOKE /8 SAE WASHER /16-18 KEPS NUT #10-24 NC X 1 1/4 ROUND HEAD BOLT RUBBER SHOCK MOUNT SHO SHO CUSHION MOUNT PLATE NYLON LOCK NUT SHO 1000 CUSHION MOUNT YOKE SHO 1000 CUSHION MOUNT YOKE ASSEMBLY /3 PORTABLE CORD /2-CORD GRIP /2 ENTRANCE ELBOW /2 CONDUIT NIPPLE LH SOCKET END CASTING 32 1 ** GREEN HEAT TEMP WIRE 33 1 ** BLACK HEAT TEMP WIRE 34 1 ** WHITE HEAT TEMP WIRE LENS LENS GASKET (SILICONE) #10-24 NYLON INSERT NUT (STAINLESS) LENS CHANNEL SET #10-24 NC SQ BD HOOK BOLT (W/VISOR) SHO 1000 LIGHT VISOR (OPTIONAL #10-24 NC KEPS NUT LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 5

6 B-1A MANUAL WINCH TOWER ASSEMBLY 6 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

7 MANUAL WINCH TOWER ASSEMBLY B-1B * 4" MANUAL WINCH TOWER WELDMENT PULLEY W/BUSHING /2-13 NC X 2 1/8 LOCKING KNOB TOWER PAD PLASTIC TOWER PAD /8 INTERNAL TOOTH LOCK WASHER #8 CUSHION CLAMP /8-11 NC X 1 GRADE 5 BOLT /2-13 NC X 2 1/4 GRADE 5 BOLT /2-13 NC NYLON INSERT NUT /4-20 NC X 1 GRADE 5 HEX BOLT /4-20 NC NYLON INSERT NUT /4 FLATWASHER STAINLESS STEEL #10 X 3/8 SELF-TAPPING PLASTIC SCREW * 3" TOWER WELDMENT MANUAL WINCH * 2-5/8" MANUAL TOWER WELDMENT FOR REM. LIGHT BAR WELDMENT, TOWER SUPPORT /8 FLAT WASHER (with painted tower) /8 FLAT WASHER (with galvanized tower) /8-11 NC NYLON INSERT NUT MAST LOCKING BAR /2 PLATED FLAT WASHER DLB 1200 BRAKE WINCH - PLATED /2 NUT (SUPPLIED WITH WINCH) 24 1 WINCH SPRING (SUPPLIED WITH WINCH) HANDLE FOR DLB " /8-16 NC X 1 GRADE 5 BOLT /16 FLAT WASHER /8-16 NC NYLON INSERT NUT CORD REEL (OPTIONAL) /16 X 1-3/4 ROLL PIN LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 7

8 B-2A MANUAL WINCH TOWER CABLE ROUTING 8 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

9 MANUAL WINCH TOWER CABLE ROUTING B-2B WIRE ROPE CLIP 3/16" WIRE ROPE THIMBLE, ¼ STEEL CABLE 3/16- X 11' MAST WIRING - 14/7 X 324" (STRAIGHT CORD) STEEL CABLE 3/16 X 17' 9" STEEL CABLE 3/16" X MAST WIRING 16/8 X 344 (CORD REEL 4 LIGHT) MAST WIRING 16/10 X 344 (CORD REEL 6 LIGHT) * MANUAL WINCH TOWER (4 Light) Complete W/Light Bar Assy * MANUAL CORD REEL TOWER (4 Light) Complete W/Light Bar Assy * MANUAL WINCH TOWER (6 Light) Complete W/Light Bar Assy * MANUAL CORD REEL TOWER (6 Light) Complete W/Light Bar Assy INSTRUCTIONS FOR REPLACING STEEL CABLES. 3/16 X 11' REMOVE THE CUSHION CLAMPS AND MAST WIRING FROM 3" MAST SECTION. REMOVE THE WIRE ROPE CLIPS AT TOP END OF THE 4" MAST SECTION. REMOVE THE 3" PULLEY AT THE END OF THE 3" MAST SECTION. REMOVE THE 2 5/8" ROUND MAST SECTION. REMOVE ALL BROKEN AND FRAYED CABLE. REPLACE NEW CABLE THROUGH SLOT AND EYELET IN THE ROUND MAST SECTION. REPLACE 2 5/8" ROUND MAST SECTION IN THE 3" MAST SECTION. ROUTE CABLE THROUGH PULLEY BRACKETS AND INSTALL 3" PULLEY. WITH ALL SECTIONS PUSHED TOGETHER TIGHT, INSERT CABLE THROUGH HALF-LINK AND REINSTALL WIRE ROPE CLIPS. REINSTALL CUSHION CLAMPS AND MAST WIRING ON THE 3" MAST SECTION. 3/16 X 17' 9" REMOVE MAST WIRING FROM BALLAST COMPARTMENT (SEE ELECTRICAL SCHEMATIC) REMOVE THE CUSHION CLAMPS AND MAST WIRING FROM 4" MAST SECTION. REMOVE STOP BOLT AND WASHER. REMOVE 4 TOWER PADS AND 3" PULLEY AT THE END OF THE 4" MAST SECTION. REMOVE THE 2 5/8" ROUND AND 3" MAST SECTIONS TOGETHER. REMOVE ALL BROKEN AND FRAYED CABLE. REPLACE NEW CABLE THROUGH SLOT AND EYELET IN THE 3" MAST SECTION AND THROUGH PULLEY BRACKETS. REPLACE 2 5/8" ROUND AND 3" MAST SECTIONS. REPLACE 3" PULLEY AND 4 TOWER PADS. ATTACH CABLE TO WINCH AND WIND IN CLOCKWISE DIRECTION UNTIL ALL SLACK IS OUT. REPLACE STOP BOLT AND WASHER. REPLACE CUSHION CLAMPS AND MAST WIRING ON 4" MAST SECTION. REPLACE MAST WIRING IN BALLAST COMPARTMENT. (SEE ELECTRICAL SCHEMATIC) 3/16 X 10 REMOVE ALL BROKEN AND FRAYED CABLE. FEED NEW CABLE THROUGH EYELET IN MAST PIVOT SECTION. FEED THROUGH PULLEY BRACKETS AND AROUND PULLEY IN FRONT UPRIGHTS. ATTACH CABLE TO WINCH AND WIND IN CLOCKWISE DIRECTION UNTIL ALL SLACK IS OUT. LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 9

10 B-3A ELECTRIC WINCH TOWER ASSEMBLY ELECTRIC WINCH MAST PIVOT SECTION ASSEMBLY 10 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

11 ELECTRIC WINCH TOWER ASSEMBLY B-3B * WELDMENT, 4 TOWER, ELECTRIC /2" PULLEY W/BUSHING " PULLEY LOCK SPRING LOCK HANDLE LOCKING KNOB 1/2-13 NC X 2 1/ PLASTIC TOWER PAD, PLASTIC TOWER PAD 5/16 SHORT /8 INTERNAL TOOTH LOCK WASHER /8-11 NC X 1 GRADE 5 BOLT #8 CUSHION CLAMP SPRING LATCH RELEASE DECAL /2-13 NC X 2 1/4 GRADE 5 BOLT /2-13 NC NYLON INSERT NUT /8-16 NC X 1 GRADE 5 BOLT /8-16 NC TOPLOCK NUT /8-16 NC X 3/4 GRADE 5 BOLT /8 INTERNAL TOOTH LOCK WASHER /4 X 3 QUICK RELEASE PIN STEEL LANYARD /4-20 NC X 3/4 GRADE 5 BOLT /4-20 NC NYLON INSERT NUT /4-20 NC X 1 GRADE 5 BOLT /4 SS FLAT WASHER #10 X 3/8 SELF TAPPING PLASTIC SCREW * 3" ELECTRIC WINCH TOWER WELDMENT * REMOVEABLE LIGHT BAR 2 5/8 ROUND TOWER WELDMENT * CORD REEL (used on cord reel towers only) /16 X 1 3/4 ROLL PIN (used on cord reel towers only) ELECTRIC WINCH MAST PIVOT SECTION ASSEMBLY * TOWER SUPPORT WELDMENT, ELECTRIC WINCH /4 PLATED HAIRPIN CLIP MAST LOCKING BAR, ELECTRIC WINCH LOCKING KNOB 1/2-13 NC X 2 1/ NARROW RIM PLATED MACHINE BUSHING /2 PLATED FLAT WASHER /2-13 NC NYLON INSERT NUT LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red LEGEND: NS= Not Shown ** =Purchase locally MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 11

12 B-4A ELECTRIC WINCH TOWER CABLE ROUTING 12 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

13 ELECTRIC WINCH TOWER CABLE ROUTING B-4B WIRE ROPE CLIP 3/ WIRE ROPE THIMBLE, 1/ MAST WIRING - 14/7 X 324 (4-LIGHT STRAIGHT CORD) MAST WIRING - 16/10 X 324 (6-LIGHT STRAIGHT CORD) STEEL CABLE 3/16 X 10' STEEL CABLE 7/32 X 26' MAST WIRING 16/8 X 344 (cord reel 4 light) MAST WIRING 16/10 X 344 (cord reel 6 light) MAST WIRING - 16/10 X 326 (4-LIGHT CORD REEL 3 PHASE) NS * ELECTRIC ST. CORD TOWER (4 Light) Complete W/Light Bar Assy * ELECTRIC CORD REEL TOWER (4 Light) Complete W/Light Bar Assy * ELECTRIC ST. CORD TOWER (6 Light) Complete W/Light Bar Assy * ELECTRIC CORD REEL TOWER (6 Light) Complete W/Light Bar Assy INSTRUCTIONS FOR REPLACING STEEL CABLES. 3/16 X 10' REMOVE THE CUSHION CLAMPS AND MAST WRING FROM 3" MAST SECTION. REMOVE LIGHT BAR BY REMOVING 4 NUTS ON BAR AND LAY BAR ON GROUND. REMOVE THE WIRE ROPE CLIPS AT TOP END OF THE 4" MAST SECTION. REMOVE THE 3" PULLEY AT THE END OF THE 3" MAST SECTION. REMOVE THE 2 5/8" ROUND MAST SECTION. REMOVE ALL BROKEN AND FRAYED CABLE. REPLACE NEW CABLE THROUGH SLOT AND EYELET IN THE ROUND MAST SECTION. REPLACE: 2 5/8" ROUND MAST SECTION IN THE 3" MAST SECTION. ROUTE CABLE THROUGH PULLEY BRACKETS AND INSTALL 3" PULLEY. WITH ALL SECTIONS PUSHED TOGETHER TIGHT, INSERT CABLE THROUGH HALF-LINK AND REINSTALL WIRE ROPE CLIPS. REINSTALL CUSHION CLAMPS AND MAST WIRING ON THE 3" MAST SECTION. 7 /32 X 26' REMOVE CABLE FROM WINCH. REMOVE MAST WIRING FROM BALLAST COMPARTMENT (SEE ELECTRICAL SCHEMATIC) REMOVE TOWER ASSEMBLY FROM TRAILER. REMOVE STOP BOLT AND WASHER. REMOVE 4 NYLON ROLLERS AND 3" PULLEY AT TOP END OF 3" SQUARE SECTION. REMOVE THE 2 5/8" ROUND AND 3" MAST SECTIONS TOGETHER. REMOVE 2 1/2" PULLEY FROM END OF 4- SECTION. REMOVE ALL BROKEN AND FRAYED CABLE. REPLACE NEW CABLE THROUGH SLOT AND EYELET IN THE 3" MAST SECTION AND THROUGH PULLEY BRACKETS. REPLACE 2 5/8- ROUND AND 3 MAST SECTIONS. REPLACE 3" PULLEY AND 4 NYLON ROLLERS. REPLACE STOP BOLT AND WASHER. RUN NEW CABLE ON OUTSIDE OF 4" SECTION. REPLACE 2 ½ PULLEY. REPLACE TOWER ASSEMBLY ON TRAILER. REPLACE MAST WIRING IN BALLAST COMPARTMENT. (SEE ELECTRICAL SCHEMATIC) RUN NEW CABLE THROUGH PULLEY BRACKEIS IN FRONT OF TRAILER. ATTACH CABLE TO ELECTRIC WINCH. WIND IN CLOCKWISE DIRECTION UNTIL ALL SLACK IS OUT. LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 13

14 B-5A HYDRAULIC TOWER ASSEMBLY 14 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

15 HYDRAULIC TOWER ASSEMBLY B-5B " HYDRAULIC TOWER, COIL CORD HYDRAULIC TOWER BACKBONE " HYDRAULIC TOWER HYDRAULIC TOWER TELESCOPIC CYLINDER HAIRPIN CLAMP 6 3 FW055 1" NARROW MACHINE BUSHING HYDRAULIC SWIVEL FITTING LOCKING KNOB 1/2-13 NC x 2" MAST LOCKING BAR 10 1 ** 5/8 FLAT WASHER 11 1 ** 1/2-13 NC NYLON INSERT NUT 12 3 FP010 2" NYLON ROLLER 13 3 ** 3/8-16 NC x 2-1/2 GRADE 5 BOLT 14 3 ** 3/8-16 NC NYLON INSERT NUT 15 1 ** 5/8-11 NC x 1" GRADE 5 BOLT 16 1 ** 5/8 SPLIT LOCK WASHER 17 2 MS023 #10 x 3/8 SELF-TAPPING PLASTIC SCREW PLASTIC TOWER PAD, 5/ ** 1/2-13 x 1 GRADE 8 BOLT 20 1 ** 1/2 SPLIT LOCK WASHER LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 15

16 B-6A HYDRAULIC TOWER COIL CORD ASSEMBLY 16 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

17 HYDRAULIC TOWER COIL CORD ASSEMBLY B-6B CORD GRIP 1A 2 EL039 1/2" BUSHING 2 6 ** 5/16-18 NC x 3/4 SELF-TAPPING SCREW 3 1 MS050 1/4-20 NC x 3/4 TRUSS HEAD SCREW 4 3 ** 1/4 FLAT WASHER 5 3 ** 1/4-20 NC HEX NUT 6 3 EL022 #8 CUSHION CLAMP COIL CORD 16/ TUNNEL,COIL CORD, HYDRAULIC TOWER LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 17

18 B-7A HYDRAULIC TOWER SUPPORT ASSEMBLY 18 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

19 HYDRAULIC TOWER SUPPORT ASSEMBLY B-7B 1 1 ** 3/4-10 NC x 10" GRADE 5 BOLT HAIRPIN RETAINER STAND-UP CYLINDER PIVOT PIN, UPPER 4 1 ** 3/4-10 NC NYLON INSERT NUT 5 4 ** 3/8-16 NC x I GRADE 5 BOLT 6 6 ** 5/16 FLAT WASHER TOWER KICK-OUT SPRING 8 4 ** 3/8-16 NC NYLON INSERT NUT STAND-UP CYLINDER FRAME MOUNT STAND-UP CYLINDER PIVOT PIN, LOWER TOWER STAND-UP CYLINDER 12 2 ** 1/4-20 NC x 3/4 GRADE 5 BOLT 13 2 ** 1/4-20 NC x 3/4 HEX NUT 14 * STAND-UP CYLINDER SHIM PLATE, 1/4 NS * STAND-UP CYLINDER SHIM PLATE, 7 GAUGE NS * STAND-UP CYLINDER SHIM PLATE, 10 GAUGE NS * STAND-UP CYLINDER SHIM PLATE, 12 GAUGE NS * STAND-UP CYLINDER SHIM PLATE, 14 GAUGE NS * STAND-UP CYLINDER SHIM PLATE, 16 GAUGE LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 19

20 B-8A HYDRAULIC TANK ASSEMBLY 20 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

21 HYDRAULIC TANK ASSEMBLY B-8B HYDRAULIC HOSE ASSEMBLY 6M3K-6FJX-6FJX902-24" HYDRAULIC HOSE ASSEMBLY 6M3K-6FJX-6FJX90S-38" HYDRAULIC HOSE ASSEMBLY 6M3K-6FJX90S-6C28FJX90M-87" HYDRAULIC FITTING, 6F50X-S 5 3 1/4-20 NC NYLON INSERT NUT HOSE CLAMP HYDRAULIC FITTING, 8V6X-S HYDRAULIC FITTING, SWIVEL ** 3/8-16 NC x 3/4 GRADE 5 BOLT 10 2 ** 1/4-20 NC x 1" TRUSS HEAD BOLT 11 2 ** 3/8 SPLIT LOCKWASHER HYDRAULIC FITTING, 6C50X-S HYDRAULIC POWER UNIT SOLENOID COIL CARTRIDGE, UP CARTRIDGE, DOWN HYDRAULIC FITTING, STRAIGHT SWIVEL, 6F6X-S FLOW CONTROL VALVE HYDRAULIC FITTING, 6FTX-S 17 2 ** 1/4 FLAT WASHER 18 2 ** 1/4-20 NC NYLON INSERT NUT HYDRAULIC FITTING, 6-8FTX-S LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 21

22 B-9A 4-LIGHT REMOVABLE LIGHT BAR ASSEMBLY B-10A 6-LIGHT REMOVABLE LIGHT BAR ASSEMBLY MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

23 4-LIGHT REMOVABLE LIGHT BAR ASSEMBLY B-9B * LIGHT BAR ASSEMBLY, 4-LIGHT 1 10 ** 1/4-20 NC X 1/2 CARRIAGE BOLT 2 4 ** 3/4-10 NC NYLON INSERT NUT 3 8 ** 3/4 FLAT WASHER * LIGHT BAR COVER PLATE * LIGHT BAR FRAME ONLY 6 10 ** 1/4-20 NC KEPS NUT CORD GRIP NUT - METAL 7A /2" BUSHING 8 4 ** 5/16-18 NC KEPS NUT LOCKING HOLE PLUG LAMP CONNECTOR, FEMALE * 2 5/8 ROUND TOWER SECTION (Manual removeable light bar) * 2 5/8 ROUND TOWER SECTION (Electric removeable light bar) 6-LIGHT REMOVABLE LIGHT BAR ASSEMBLY * LIGHT BAR ASSEMBLY, 6-LIGHT 1 10 ** 1/4-20 NC X 1/2 CARRIAGE BOLT 2 4 ** 3/4-10 NC NYLON INSERT NUT 3 8 ** 3/4 FLAT WASHER * LIGHT BAR COVER PLATE * LIGHT BAR FRAME ONLY 6 10 ** 1/4-20 NC KEPS NUT CORD GRIP NUT - METAL 7A /2" BUSHING 8 4 ** 5/16-18 NC KEPS NUT LOCKING HOLE PLUG LAMP CONNECTOR, FEMALE * 2 5/8 ROUND TOWER SECTION (Manual removeable light bar) * 2 5/8 ROUND TOWER SECTION (Electric removeable light bar) B-10B LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 23

24 C-1A AXLE ASSEMBLY, HITCH ASSEMBLY AND TONGUE JACK 24 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

25 AXLE ASSEMBLY, HITCH ASSEMBLY AND TONGUE JACK C-1B SIDE CRANK JACK, SNAP RING (SHOWN) SIDE CRANK JACK, TUBE MOUNT (NOT SHOWN) TOP CRANK JACK, TUBE MOUNT (NOT SHOWN) JACK LOCK PIN (USE WITH and ) JACK SNAP RING 2 5/16 XT (USE WITH ) A JACK HOLE PIN KIT /2-13 NC X 4 GRADE 5 BOLT BALL COUPLER ONLY /2-13 NC TOPLOCK NUT * PINTLE HITCH WELDMENT /8-11 NC X 5 GRADE 5 BOLT JACK MOUNTING BRACKET W/SNAP RING /8-11 NC TOPLOCK NUT SAFETY CHAIN SET AXLE LUG NUT * WHEEL & TIRE 15" SILVER MOD TIRE P225/75R TIRE VALVE STEM AXLE MOUNTING HARDWARE KIT AXLE 3000 LB. 56"/44" " BALL COUPLING KIT HITCH PLATE, ONE EACH /16-14NC X 1 1/2 GRADE 5 BOLT /8 FLAT WASHER /16-14NC NYLON LOCK NUT NS * REVERSIBLE HITCH ASSY. NS HUB W/RACES NS BEARING SET NS HUB W/RACES AND BEARING SET LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 25

26 C-2A TAILLIGHTS, DOOR PROPS AND OUTRIGGER LOCKS 26 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

27 TAILLIGHTS, DOOR PROPS AND OUTRIGGER LOCKS C-2B ¼-20 NC NYLON INSERT NUT OUTRIGGER PIN BLOCK OUTRIGGER PIN /4-20 NC X 1 3/4 SS SCREW TELESCOPIC PROP /4-20 NC X 1 SS SCREW /16 ALUMINUM RIVETS TAILLIGHT TAILLIGHT WIRING HARNESS TAILLIGHT ASSEMBLY LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 27

28 C-3A BATTERY, CABLES, AND GROUND STRAP 28 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

29 BATTERY, CABLES, AND GROUND STRAP C-3B " BATTERY CABLE " BATTERY CABLE /16-18 NC NYLON INSERT NUT NYLON BATTERY HOLD DOWN VOLT BATTERY VOLT BATTERY (ARCTIC SPL. ONLY) J-B0LT 5/16 X 11" /4-18 NC X 1 BOLT W/ KEPS NUT /4 FLAT WASHER GROUND STRAP LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 29

30 C-4A KUBOTA V2203 ENGINE/GENERATOR SET 30 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

31 KUBOTA V2203 ENGINE/GENERATOR SET C-4B /8-16 NC NYLON INSERT NUT ENGINE MOUNT WASHER /16-18 NC NYLON INSERT NUT SNUBBING WASHER /16-18 NC X 1 GRADE 5 BOLT /8 FLAT WASHER RUBBER ENGINE MOUNTS /8-16 NC X 2 1/4 GRADE 5 BOLT mm X 20mm X 1.25 GRADE 8.8 BOLT * ENGINE MOUNT BRACE, RIGHT * ENGINE MOUNT BRACE, LEFT /8 SAE FLAT WASHER /16-18 NC KEPS NUT /16-18 NC X 1-1/4 GRADE 5 BOLT /16 INTERNAL TOOTH LOCK WASHER AIR INTAKE HOSE HOSE CLAMP #32 18 FUEL FILTER MOUNTING PLATE KUBOTA FUEL FILTER mm X 20mm X 1.25 GRADE 8.8 BOLT /16 SPLIT LOCK WASHER SCREW ROMEX CLAMP 3/ /4" STEEL LOCK NUT AIR CLEANER MOUNT PLATE EXHAUST MANIFOLD MOUNT GASKET KUBOTA BOX MUFFLER KIT /16-18 NC X 4-1/4 GRADE 5 BOLT AIR CLEANER RADIAL SEAL AIR CLEANER BAND CLAMP MUFFLER CLAMP GENERATOR MOUNT PLATE ENGINE KUBOTA V ENGINE KUBOTA V ENGINE KUBOTA V2003T EXHAUST PIPE, KUBOTA GENERATOR 15 =See Kubota Dealer NOTE: Exhaust pipe, muffler, and air cleaners used may differ from illustration depending on engine used. LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 31

32 C-4C ISUZU 4LE ENGINE/GENERATOR SET 32 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

33 ISUZU 4LE ENGINE/GENERATOR SET C-4D EXHAUST PIPE, ISUZU 2 AIR CLEANER MM X 20MM X 1.25 GRADE 8.8 BOLT /8 SAE FLAT WASHER MUFFLER, ISUZU MUFFLER GASKET /8-16 NC X 2 1/4 GRADE 5 BOLT CLAMP, 2 SCREW ROMEX 3/ GENERATOR MOUNT PLATE, ISUZU GENERATOR MOUNT PLATE, ISUZU/NEWAGE 3 PHASE GENERATOR MOUNT PLATE, ISUZU/MARATHON 3 PHASE /8 FLAT WASHER /4" STEEL LOCK NUT /16-18 NC X 1 GRADE 5 BOLT /16 FLAT WASHER ENGINE MOUNT WASHER ENGINE MOUNT, RIGHT ENGINE MOUNT, LEFT AIR INTAKE HOSE, ISUZU RUBBER ENGINE MOUNTS /8-16 NC NYLON INSERT NUT GENERATOR, MARATHON 15KW GENERATOR, MARATHON 20KW GENERATOR, NEWAGE 20 KW 3 PHASE GENERATOR, MARATHON 20 KW 3 PHASE ENGINE, ISUZU 4LE /16-18 NC NYLON INSERT NUT SNUBBING WASHER NS AIR FILTER (PRIMARY) NS AIR FILTER (SECONDARY) NS OIL FILTER NS FUEL =See Isuzu Dealer NOTE: Exhaust pipe, muffler, and air cleaners used may differ from illustration depending on engine used. LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 33

34 C-5A KUBOTA RADIATOR AND MOUNTING PLATE 34 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

35 KUBOTA RADIATOR AND MOUNTING PLATE C-5B /8-16 NC KEPS NUT 2 UPPER RADIATOR HOSE #20 HOSE CLAMP KUBOTA RADIATOR * KUBOTA/PERKINS RADIATOR MOUNT PLATE /8 FLAT WASHER /8-16 NC X 1 GRADE 5 BOLT 8 LOWER RADIATOR HOSE /16-18 NC KEPS NUT /4 FLAT WASHER /16-18 NC X 3/4 GRADE 5 =Contact local Kubota Dealer LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 35

36 C-5C ISUZU RADIATOR MOUNTING PLATE 36 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

37 ISUZU RADIATOR MOUNTING PLATE C-5D /16-18 NC X 3/4 GRADE 5 BOLT /4 FLAT WASHER * ISUZU RADIATOR MOUNT PLATE /16-18 NC KEPS NUT LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 37

38 C-6A 4-LIGHT BALLAST ASSEMBLY 38 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

39 4-LIGHT BALLAST ASSEMBLY C-6B HPS TRANSFORMER, CAPACITOR, AND STARTER HPS CAPACITOR AND STARTER ONLY * BALLAST PANEL, ONLY SCREW ROMEX CLAMP, 3/4 3 2 ** 7/8 CUSHION CLAMP 4 2 ** 1/4-20 NC SELF TAPPING SCREW 5 1 ** 1/4-20 NC X 1 1/2 STUD BOLT /4-20 NC KEPS NUT /4 INTERNAL TOOTH LOCK WASHER /16-18 NC SELF-TAPPING SCREW TRANSFORMER ONLY #6-32 NC KEPS NUT NS RECEPTACLE 240V. 15A (6KW ONLY) OUTLET COVER /4-20 NC NYLON INSERT NUT DUAL CAPACITOR MOUNTING CLAMP CAPACITOR ONLY, 24 UF NS CAPACITOR ONLY, 28 UF #8 FLAT WASHER SS #6-32 NC X 3/8 ROUND HEAD SCREW /4 FLAT WASHER NS /8 HOLE PLUG (MANUAL WINCH) /4-20 X 2-1/2 GRADE 5 BOLT STEEL LOCK NUT, 3/ RUBBER EDGE TRIM 3/16 X 5 LONG LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 39

40 C-7A 4-LIGHT AC GAUGE PANEL ASSEMBLY 40 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

41 4-LIGHT AC GAUGE PANEL ASSEMBLY C-7B /16 FLAT WASHER /16-18 NC X 1 1/4 GRADE 5 BOLT /16-18 NC X 3/4 GRADE 5 BOLT #6-32 NC KEPS NUT AMP CIRCUIT BREAKER, KUBOTA ONLY * BALLAST PANEL, ONLY ¼-20 NC KEPS NUT #6-32 NC X 3/8 ROUND HEAD SCREW CIRCUIT BREAKER SWITCH, 15 AMP SP * LEFT QUARTER PANEL 4-LIGHT /4-20 NC X 1/2 ROUND HEAD NYLON SCREW /4-20 NC X 3/4 SCREW /4-20 NC NYLON INSERT NUT CIRCUIT BREAKER SWITCH, 15 AMP DP (6KW ONLY) CARLING SWITCH 20 AMP SP (8KW ONLY) * KUBOTA DC GAUGE PANEL /4 INTERNAL TOOTH LOCK WASHER /4-20 NC X 1 GRADE 5 BOLT /4-20 NC WING NUT 19 1 ** 1/4-20 NC X 1 1/2 STUD /4-20 NC X 1 SCREW /4 STAINLESS STEEL FLAT WASHER /16-18 NC KEPS NUT /4" CUSHION CLAMP WITH 3/8 HOLE PULLEY BRACKET (NOTE: USE LOWER HOLE FOR MANUAL WINCH AND UPPER HOLE FOR ELECTRIC WINCH) CARLING SWITCH, 15 AMP DP (6KW ONLY) CARLING SWITCH, 30AMP DP (8KW ONLY) LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 41

42 C-7C ISUZU 4-LIGHT AC GAUGE PANEL ASSEMBLY C-7C2 ISUZU 4-LIGHT AC GAUGE PANEL ASSEMBLY (3 PHASE) 42 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

43 ISUZU 4-LIGHT AC GAUGE PANEL ASSEMBLY C-7D /16 FLAT WASHER /16-18 NC X 1 1/4 GRADE 5 BOLT /16-18 NC X 3/4 GRADE 5 BOLT #6-32 NC KEPS NUT AMP CIRCUIT BREAKER, KUBOTA ONLY * BALLAST PANEL, ONLY ¼-20 NC KEPS NUT #6-32 NC X 3/8 ROUND HEAD SCREW CIRCUIT BREAKER SWITCH, 15 AMP SP * LEFT QUARTER PANEL 4-LIGHT /4-20 NC X 1/2 ROUND HEAD NYLON SCREW /4-20 NC X 3/4 SCREW /4-20 NC NYLON INSERT NUT CIRCUIT BREAKER SWITCH, 15 AMP DP (6KW ONLY) CARLING SWITCH 20 AMP SP (8KW ONLY) * ISUZU DC GAUGE PANEL /4 INTERNAL TOOTH LOCK WASHER /4-20 NC X 1 GRADE 5 BOLT /4-20 NC WING NUT 19 1 ** 1/4-20 NC X 1 1/2 STUD /4-20 NC X 1 SCREW /4 STAINLESS STEEL FLAT WASHER /16-18 NC KEPS NUT /4" CUSHION CLAMP WITH 3/8 HOLE PULLEY BRACKET (NOTE: USE LOWER HOLE FOR MANUAL WINCH AND UPPER HOLE FOR ELECTRIC WINCH) CARLING SWITCH, 15 AMP DP (6KW ONLY) CARLING SWITCH, 30AMP DP (8KW ONLY) ISUZU 4-LIGHT AC GAUGE PANEL ASSEMBLY (3 PHASE) V 3 PHASE, LEFT FRONT QUARTER PANEL AMP DPST CIRCUIT BREAKER AMP SPST CIRCUIT BREAKER #6-32 X 1/4 PHILLIPS HEAD MACHINE SCREW BUSS BAR C-7D2 LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 43

44 C-7E 4-LIGHT AC GAUGE PANEL AND LSC 100 LIGHT SEQUENCE COMMANDER CONTROLLER PANEL ASSEMBLY 44 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

45 4-LIGHT AC GAUGE PANEL AND LSC 100 C-7F LIGHT SEQUENCE COMMANDER CONTROLLER PANEL ASSEMBLY LSC 100 CONTROL PANEL ASSEMBLY (STANDARD) PANEL FOR ELECTRIC OR HYDRAULIC TOWERS (OPTIONAL) LSC 100 COVER BACK /4-20 NC X 3/4 ROUND HEAD SCREW /4 FLAT WASHER /4 KEPS NUT /4-20 NC X 3/4 MACHINE SCREW /4-20 NC X 3/4 HEX BOLT LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 45

46 C-8A MANUAL WINCH AND TOWER SUPPORT ASSEMBLY C-8A2 46 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

47 MANUAL WINCH AND TOWER SUPPORT ASSEMBLY C-8B /16-18 NC X 1 GRADE 5 BOLT /8-16 NC X 1 GRADE 5 BOLT * TOWER PIVOT WELDMENT /16-18 NC KEPS NUT /8-16 NC KEPS NUT /2-13 NC X 2 1/4 GRADE 5 BOLT /16 FLAT WASHER /4-20 NC KEPS NUT /4 FLAT WASHER WINCH, PLATED 2500 LBS /2 PULLEY W/BUSHING /2-13 NC NYLON INSERT NUT /4-20 NC X 3/4 SS TRUSS HEAD BOLT * TOWER KICK OUT SPRING /4 RIVET KICKOUT SPRING PAD NS ONE PIECE WINCH HANDLE (BEFORE 2/2004) 1 THREE PIECE WINCH HANDLE ASSEMBLY (AFTER 2/2004) INCLUDES: DRIVE HUB WINCH HANDLE /20 KW WINCH HANDLE EXTENSION TUBE NC x 1-3/4 GRADE 5 HEX BOLT /4-20 NC NYLON INSERT NUT C-8B2 LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 47

48 C-8C ELECTRIC WINCH, SLACK LIMIT SWITCH, AND TOWER SUPPORT 48 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

49 ELECTRIC WINCH, SLACK LIMIT SWITCH, AND TOWER SUPPORT C-8D /16-18 NC X 1 GRADE 5 BOLT /8-16 NC X 1 GRADE 5 BOLT * TOWER PIVOT WELDMENT /16-18 NC KEPS NUT /8-16 NC KEPS NUT /2-13 NC X 2 1/4 GRADE 5 BOLT /8 FLAT WASHER STRONG ARM ELECTRIC WINCH EMERGENCY WINCH HANDLE * STRONG ARM WINCH COVER /16-18 NC SELF TAPPING SCREW /2 PULLEY W/BUSHING /2-13 NC NYLON INSERT NUT #6-32 NC X 1 1/2 ROUND HEAD SCREW /4 FLAT WASHER SLACK LIMIT SWITCH * SLACK LIMIT SWITCH MOUNT BRACKET #6 FLAT WASHER #6-32 NC HEX NUT * TOWER KICK OUT SPRING /16 FLAT WASHER DECAL-CORRECT WINCH OPERATION A.S.(NS) OPTIONAL WORKLIGHT A.S.(NS) WORKLIGHT MOUNTING BRACKET LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 49

50 C-9A FUEL TANK ASSEMBLY 50 GALLON FUEL TANK ASSEMBLY C-9A2 70 GALLON FUEL TANK ASSEMBLY 50 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

51 FUEL TANK ASSEMBLY 50 GALLON FUEL TANK ASSEMBLY FUEL TANK FILLER CAP FUEL TANK, 50 GALLON /4 X 1 1/4 FENDER WASHER /4 INTERNAL TOOTH LOCK WASHER /4-20 NC X 1/2 GRADE 5 BOLT 70 GALLON FUEL TANK ASSEMBLY GALLON FUEL TANK FUEL TANK CAP 2.25 NECK BEFORE 1/ FUEL TANK CAP 4.3 NECK AFTER 1/ FUEL LEVEL GAUGE/SENDER GAUGE ADAPTER FUEL SUCTION TUBE ASSEMBLY /8 NPT X 5/16" HOSE FITTING /8 NPT X 1/8 NPT REDUCING BUSHING /8-16 X 1 1/2" GR 5 HEX BOLT /16" PLATED FLAT WASHER /8" SPLIT LOCK WASHER 11 2 ** 3/8" NPT PIPE PLUG C-9B C-9B2 LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 51

52 C-10A RIGHT QUARTER PANEL ASSEMBLY C-10C 240V REAR PANEL WITH DISCONNECT 52 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

53 RIGHT QUARTER PANEL ASSEMBLY C-10B * RIGHT QUARTER PANEL * RIGHT QUARTER PANEL (After Sept. 2005) /4-20 NC X 3/4 SCREW /4-20 NC X 1 ROUND HEAD NYLON SCREW WINCH HANDLE NYLON BLOCK /4-20 NC NYLON INSERT NUT /4-20 NC X 3/4 GRADE 5 BOLT /4 STAINLESS STEEL FLAT WASHER SAFETY SWITCH 240V REAR PANEL WITH DISCONNECT C-10D LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 53

54 C-11A KUBOTA ENGINE DC GAUGE PANEL ASSEMBLY 54 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

55 KUBOTA ENGINE DC GAUGE PANEL ASSEMBLY C-11B * KUBOTA DC GAUGE PANEL /4-20 NC X 1/2 TRUSS HEAD SCREW VOLT METER HOUR METER, 12 VOLT IGNITION KEY (KUBOTA) KUBOTA KEY SWITCH W/2 KEYS 7 GLOW PLUG LAMP (KUBOTA) 8 GLOW LAMP TIMER (KUBOTA) /4-20 NC KEPS = See local Kubota Dealer LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 55

56 C-11C ISUZU ENGINE DC GAUGE PANEL ASSEMBLY 56 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

57 ISUZU ENGINE DC GAUGE PANEL ASSEMBLY C-11D 1 1 CF ISUZU CONTROL BOX IGNITION SWITCH KIT ISUZU HOUR METER ISUZU CONTROL BOX COVER RESISTANCE CONTROL PILOT LAMP RED PILOT LAMP AMBER /16 FLAT WASHER /16-18 MC X 3/4 GRADE 5 BOLT /8 GROMMET /16-18 NC X 1 GRADE 5 BOLT O.D. X.451 I.D. WASHER ISUZU CONTROL BOX COVER /16-18 NC NYLON INSERT NUT /8 CUSHION CLAMP CF = Contact Allmand for Further Info LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 57

58 C-12A RIGHT ROOF PANEL ASSEMBLY 58 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

59 RIGHT ROOF PANEL ASSEMBLY C-12B * RIGHT ROOF PANEL (Isuzu 4LE) * RIGHT ROOF PANEL (Kubota 2003T) * RIGHT ROOF PANEL (Kubota 2203/1903) * RIGHT ROOF PANEL (Hydraulic Tower) ROOF PANEL SHIM /4-20 NC X 3/4 TRUSS HEAD SCREW /4 FLAT WASHER ¼-20 NC NYLON INSERT NUT /4-20 NC X 1/2TRUSS HEAD SCREW LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 59

60 C-12C LEFT ROOF PANEL ASSEMBLY 60 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

61 LEFT ROOF PANEL ASSEMBLY C-12D * LEFT ROOF PANEL * LEFT ROOF PANEL (Hydraulic Tower) /4-20 NC X 1/2 TRUSS HEAD SCREW ¼-20 NC NYLON INSERT NUT LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 61

62 C-13A RIGHT DOOR PANEL ASSEMBLY C-13A2 RIGHT DOOR PANEL ASSEMBLY (SLAM LATCH MODEL) 62 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

63 RIGHT DOOR PANEL ASSEMBLY C-13B /4-20 NC NYLON INSERT NUT DOOR HINGE /4-20 NC X 3/4 SCREW * RIGHT DOOR PANEL NS * LEFT DOOR PANEL #10-24 NC KEPS NUT LATCH CAM, W/SQUARE HEAD SET SCREW #10-24 NC X 3/4 FLAT HEAD SCREW LOCKING T-HANDLE TELESCOPIC PROP RIGHT DOOR PANEL ASSEMBLY(SLAM LATCH MODEL) (After S/N 0023MXL04) /4-20 NC NYLON INSERT NUT DOOR HINGE /4-20 NC X 3/4 SCREW * RIGHT SLAM LATCH DOOR PANEL #10-24 NC KEPS NUT SLAM LATCH NS STRIKER #10-24 NC X 3/4 FLAT HEAD SCREW TELESCOPIC PROP NS SLAM LATCH RETRO KIT C-13B2 LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 63

64 C-13C LEFT DOOR PANEL ASSEMBLY C-13C2 LEFT DOOR PANEL ASSEMBLY (SLAM LATCH MODEL) 64 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

65 LEFT DOOR PANEL ASSEMBLY C-13D /4-20 NC NYLON INSERT NUT DOOR HINGE /4-20 NC X 3/4 SCREW * LEFT DOOR PANEL #10-24 NC KEPS NUT LATCH CAM #10-24 NC X 3/4 FLAT HEAD SCREW LOCKING T-HANDLE TELESCOPIC PROP LEFT DOOR PANEL ASSEMBLY(SLAM LATCH MODEL) (After S/N 0023MXL04) /4-20 NC NYLON INSERT NUT DOOR HINGE /4-20 NC X 3/4 SCREW * LEFT SLAM LATCH DOOR PANEL #10-24 NC KEPS NUT SLAM LATCH NS STRIKER #10-24 NC X 3/4 FLAT HEAD SCREW TELESCOPIC PROP NS SLAM LATCH RETRO KIT C-13D2 LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 65

66 C-14A LEFT FRONT PANEL ASSEMBLY 66 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

67 LEFT FRONT PANEL ASSEMBLY C-14B LEFT FRONT ABS PANEL (BLACK) * LEFT FRONT PANEL (METAL) TINNERMAN FASTENER /4-20 NC X 1/2 TRUSS HEAD SCREW LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 67

68 C-14C RIGHT FRONT PANEL ASSEMBLY 68 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

69 RIGHT FRONT PANEL ASSEMBLY C-14D RIGHT FRONT ABS PANEL (BLACK) * RIGHT FRONT PANEL (METAL) TINNERMAN FASTENER /4-20 NC X 3/4 TRUSS HEAD SCREW /4 FLAT WASHER /4-20 NC NYLON INSERT NUT /4-20 NC X 3/4 TRUSS HEAD SCREW LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 69

70 C-15A OUTRIGGERS AND REAR JACK MOUNT ASSEMBLY C-15C REAR TOWER SUPPORT ASSEMBLY 70 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

71 OUTRIGGERS AND REAR JACK MOUNT ASSEMBLY C-15B LONG JACK REPLACEMENT HANDLE * LEFT/RIGHT OUTRIGGER GROUND ROD #10-24 NC X 1/2 SCREW GROUND ROD CLIP JACK SNAP RING 2 5/16 XT #10-24 NC KEPS NUT 9 1 SERIAL NUMBER PLATE BLIND RIVET SWIVEL MOUNT JACK WITH SIDE CRANK /4-20 NC X 1 SCREW * REAR JACK MOUNT WELDMENT 14 2 ** #4 CUSHION CLAMP /4-20 NC NYLON INSERT NUT REAR TOWER SUPPORT ASSEMBLY CORD HOLDER REAR TOWER SUPPORT WELDMENT REAR TOWER SUPPORT WELDMENT EXTENDED (optional) REAR TOWER SUPPORT PIN ROLL PIN, 1/4 X 2 PLATED BOLT, 5/16-18 X 1-1/4 GR /16 FLAT WASHER /16-18 X 1 HEX HEAD BOLT /16-18 NYLON INSERT NUT /4-20 X 3/4 TRUSS HEAD BOLT C-15D LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 71

72 C-16A REAR OUTLET PANEL ASSEMBLY C-16A2 REAR OUTLET PANEL ASSEMBLY 72 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

73 REAR OUTLET PANEL ASSEMBLY C-16B OUTLET PANEL AMP 2 POLE BREAKER (20 KW) AMP 2 POLE BREAKER (15 KW) #8-32 NC KEPS NUT AMP CIRCUIT BREAKER AMP CIRCUIT BREAKER POWER DISTRIBUTION BLOCK /4-20 NC KEPS NUT AMP DOUBLE POLE SWITCH #8-32 NC X 1/2 MACHINE SCREW /4-20 NC X 1 TRUSS HEAD SCREW NS /100 CIRCUIT BREAKER HOLE COVER (NON-CSA ONLY) REAR OUTLET PANEL ASSEMBLY AMP GFCI RECEPTACLE VOLT TWISTLOCK RECEPTACLE #8-32 NC KEPS NUT /4-20 NC KEPS NUT #8-32 NC X 1/2 ROUND HEAD SCREW /4-20 NC X 1-3/4 TRUSS HEAD SCREW C-16B2 LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 73

74 C-16A3 REAR OUTLET PANEL ASSEMBLY (CANADIAN) C-16A4 REAR OUTLET PANEL ASSEMBLY (CANADIAN) 74 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

75 REAR OUTLET PANEL ASSEMBLY (CANADIAN) C-16B OUTLET PANEL WITH 4-30 AMP RECEPTACLES AMP 2 POLE BREAKER (20 KW) AMP 2 POLE BREAKER (15 KW) #8-32 NC KEPS NUT AMP CIRCUIT BREAKER POWER DISTRIBUTION BLOCK /4-20 NC KEPS NUT AMP DOUBLE POLE SWITCH #8-32 NC X 1/2 MACHINE SCREW /4-20 NC X 1 TRUSS HEAD SCREW REAR OUTLET PANEL ASSEMBLY (CANADIAN) AMP GFCI RECEPTACLE VOLT TWISTLOCK RECEPTACLE #8-32 NC KEPS NUT /4-20 NC KEPS NUT #8-32 NC X 1/2 ROUND HEAD SCREW /4-20 NC X 1-3/4 TRUSS HEAD SCREW C-16B4 LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 75

76 C-16A5 REAR OUTLET PANEL ASSEMBLY (3 PHASE 240 Volt) C-16A6 REAR OUTLET PANEL ASSEMBLY (3 PHASE 240 Volt) 76 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

77 REAR OUTLET PANEL ASSEMBLY (3 PHASE 240 Volt) PHASE 240V REAR OUTLET PANEL A PUSH BUTTON CIRCUIT BREAKER /4-20 NC PLATED KEPS NUT /4-20 NC X 1-3/4 PHILLIPS TRUSS HEAD SCREW AMP SINGLE POLE SWITCH V 30A OUTLET A 3 POLE CIRCUIT BREAKER /4 INTERNAL TOOTH LOCKWASHER #6-32 NC X 1/4 PHILLIPS HEAD MACHINE SCREW #8-32 NC X 1/2 MACHINE SCREW #8-32 NC KEPS NUT #10-24 NC X 1/2 ROUND HEAD MACHINE SCREW #10-24 NC PLATED KEPS NUT AMP 3 POLE CIRCUIT BREAKER SINGLE POLE POWER DISTRIBUTION BLOCK A GFCI RECEPTACLE 17 1 BACKING NUT(INCLUDED WITH ) 18 1 PLASTIC NUT(INCLUDED WITH ) #10-24 NC X 3/4 PHILLIPS HEAD MACHINE SCREW REAR OUTLET PANEL ASSEMBLY (3 PHASE 240 Volt) PHASE 240V REAR OUTLET PANEL A PUSH BUTTON CIRCUIT BREAKER /4-20 NC PLATED KEPS NUT /4-20 NC X 1-3/4 PHILLIPS TRUSS HEAD SCREW AMP SINGLE POLE SWITCH V 30A OUTLET A 3 POLE CIRCUIT BREAKER /4 INTERNAL TOOTH LOCKWASHER #6-32 NC X 1/4 PHILLIPS HEAD MACHINE SCREW #8-32 NC X 1/2 MACHINE SCREW #8-32 NC KEPS NUT #10-24 NC X 1/2 ROUND HEAD MACHINE SCREW #10-24 NC PLATED KEPS NUT AMP 3 POLE CIRCUIT BREAKER SINGLE POLE POWER DISTRIBUTION BLOCK A GFCI RECEPTACLE 17 1 BACKING NUT(INCLUDED WITH ) 18 1 PLASTIC NUT(INCLUDED WITH ) #10-24 NC X 3/4 PHILLIPS HEAD MACHINE SCREW C-16B6 C-16B5 LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 77

78 C-16A7 REAR OUTLET PANEL ASSEMBLY (3 PHASE 208 Volt) 78 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

79 REAR OUTLET PANEL ASSEMBLY (3 PHASE 208 Volt) C-16B PHASE 208V REAR OUTLET PANEL A 3 POLE CIRCUIT BREAKER AMP 3 POLE CIRCUIT BREAKER AMP CIRCUIT BREAKER 5 2 BACKING NUT(INCLUDED WITH ) 6 2 PLASTIC NUT(INCLUDED WITH ) A DPST CIRCUIT BREAKER POWER DISTRIBUTION BLOCK AMP 120V GFCI RECEPTACLE A V GFCI OUTLET /4-20 NC X 1-3/4 PHILLIPS TRUSS HEAD SCREW /4-20 NC PLATED KEPS NUT #6-32 NC X 1/4 PHILLIPS HEAD MACHINE SCREW #8-32 NC X 1/2 MACHINE SCREW #8-32 NC KEPS NUT 16 4 #6-32 NC X 3/4 SCREW (SUPPLIED WITH GFCI) /4 INTERNAL TOOTH LOCKWASHER #10-24 NC X 1/2 ROUND HEAD MACHINE SCREW #10-24 NC PLATED KEPS NUT LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 79

80 C-17A REAR DOOR AND PANEL ASSEMBLY 80 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

81 REAR DOOR AND PANEL ASSEMBLY C-17B * OUTLET DOOR PANEL /4-20 NC X 3/4 TRUSS HEAD SCREW T HANDLE ASSEMBLY #10-24 NC X 3/4 FLAT HEAD SCREW #10-24 KEPS NUT AMP REAR OUTLET ASSEMBLY (CSA) (OPTIONAL) AMP REAR OUTLET ONLY (DOMESTIC) (OPTIONAL) C 50 AMP REAR OUTLET ONLY (CSA) (OPTIONAL) #10-24 NC X 3/4 ROUND HEAD SCREW #10-24 NC X 1 ROUND HEAD SCREW * SMALL OUTLET PANEL COVER * LARGE OUTLET PANEL COVER /4-20 NC KEPS NUT DOOR HINGE NS * 50 AMP OUTLET HOLE COVER PANEL LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 81

82 C-17C LICENSE PLATE HOLDER ASSEMBLY 82 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

83 LICENSE PLATE HOLDER ASSEMBLY C-17D LICENSE PLATE HOLDER #10-24 NC X 1 MACHINE SCREW SPACER #10-24 KEPS NUT LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 83

84 D-1A DECAL PLACEMENT 84 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

85 DECAL PLACEMENT D-1B DECAL-WARNING COMBUSTIBLE GAS LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 85

86 D-2A DECAL PLACEMENT ML MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

87 DECAL PLACEMENT D-2B DECAL - DO NOT STAND DECAL - UNLATCHED/LATCHED DECAL - ALLMAND YELLOW TO ORANGE 11.75" DECAL - GRADATION STRIPE SET DECAL - MAXI-LITE DECAL - ALLMAND, YELLOW TO ORANGE DECAL - ML 20 NS DECAL - ML DECAL - XL NS DECAL - ARCTIC SPECIAL NS DECAL - WARNING NON-VERTICAL NS DECAL - MOVING PART HAZARD LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 87

88 D-3A DECAL PLACEMENT ML MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

89 DECAL PLACEMENT D-3B DECAL - DANGER HAZARDOUS VOLTAGE DECAL - WARNING EXCESSIVE TOW SPEED DECAL - GROUND LUG DECAL - DO NOT STAND DECAL - MAXI-LITE DECAL - ML 20 NS DECAL - ML DECAL - XL NS DECAL - ARCTIC SPECIAL ALLMAND, YELLOW TO ORANGE DECAL DECAL - GRADATION STRIPE SET LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 89

90 D-4A DECAL PLACEMENT 90 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

91 DECAL PLACEMENT D-4B DECAL - LIGHTS 1,2,3,4 (4-LIGHT OPTION) NS DECAL - LIGHTS 1,2,3,4,5,6 (6-LIGHT OPTION) DECAL - WARNING FAILURE TO TURN OFF LIGHTS DECAL - IGNITION START, ELECTRIC WINCH DECAL - WARNING OPERATORS MANUAL DECAL DANGER ELECTRIC SHOCK DECAL-DIESEL LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 91

92 D-5A DECAL PLACEMENT 92 MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

93 DECAL PLACEMENT D-5B DECAL - NON-VERTICAL TOWER DECAL - CHECK FOR OVERHEAD OBSTRUCTIONS DECAL - PROPOSITION 65, DIESEL DECAL - CAUTION, RED LATCH (ELECTRIC WINCH) DECAL - OPERATING INSTRUCTIONS DECAL - WARNING, PULL PIN DECAL - DANGER, ELECTRIC SHOCK DECAL - PICTORIAL OPERATOR, ELECTRIC WINCH DECAL - PICTORIAL OPERATOR, MANUAL WINCH DECAL - LIFT INSTRUCTIONS LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 93

94 E-1A KUBOTA V2003T and V2203 V2003T V MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE

95 KUBOTA V2003T and V2203 E-1B OIL FILTER, V1903, V2203, V2003T ENGINES NS FUEL FILTER, V1903, V2203, V2003T ENGINES NS FUEL LINE (1/4" FUEL LINE 72") NS RETURN LINE (NYLON HOSE 80") NS FUEL LINE (5/16" FUEL LINE 14") NS FUEL LINE (5/16" FUEL LINE 10") NS TOP RADIATOR HOSE NS BOTTOM RADIATOR HOSE NS GROUND STRAP NS RADIATOR NS HIGH TEMPERATURE SWITCH NS AIR CLEANER ELEMENT ONLY NS AIR CLEANER/FILTER ELEMENT ASSEMBLY NS * ENGINE MOUNT BRACE (LEFT) (2203 AND 2003T) NS * ENGINE MOUNT BRACE (RIGHT) (2203 AND 2003T) NS OIL PRESSURE SWITCH NS FUEL SOLENOID, KUBOTA 4 = See local Kubota Dealer LEGEND: NS= Not Shown * Use these codes to designate color needed: ** =Purchase locally 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE 95

96 E-2A ISUZU 4LE MAXI-LITE ML 15/ML 20 SERIES P ARTS REFERENCE