Symbol indicating an action that must not be done. Symbol indicating an action that should be done. Symbol indicating related or useful information

Transcription

1 Installation Manual

2 Using the Produt Safely Safety Instrutions This guide explains how to suspend the EV-100/EV-105 from a eiling or install it on a wall using the supplied Diret Mount. Make sure you read this guide arefully to use the installation mounts and the projetor safely. Inorret handling that ignores instrutions in this guide ould damage this produt or ould result in personal injury or property damage. Keep this installation guide at hand for future referene. Regarding how to handle the projetor, read the User's Guide and Safety Instrutions supplied with your projetor and follow the instrutions in these douments. Safety Indiations The doumentation and this produt use graphial symbols to show how to use this produt safely and orretly to prevent injury to ustomers and others, and damage to property. The indiations and their meaning are as follows. Make sure you understand them properly before reading the guide. Symbol Warning Caution Explanation This symbol indiates information that, if ignored, ould possibly result in personal injury or even death due to inorret handling. This symbol indiates information that, if ignored, ould possibly result in personal injury or physial damage due to inorret handling. General Information Indiations Symbols Explanation Symbol indiating an ation that must not be done Symbol indiating an ation that should be done Symbol indiating related or useful information Preautions on Installing the Projetor Warning Installing the projetor on a eiling or a wall should only be performed by a professional with the neessary skills and know-how. If installation work is not arried out orretly, the mount or the projetor ould fall ausing injury or aident to our. Follow the instrutions in this guide when performing installation work. If the instrutions are not followed, the mount or the projetor ould fall ausing injury or aident to our. Installation should be performed by at least two people. Also, make sure you have a seure, stable footing so that you do not drop the mount or the projetor. 1

3 Using the Produt Safely Warning Make sure you attah the safety wire supplied with the projetor to prevent the mount from falling due to earthquakes or vibrations. Do not attah anything to this mount exept for a projetor from EPSON. Otherwise, the mount may falls and ould ause death or personal injury. When installing, make sure you install a breaker (with a rated urrent of 10 A or less) in a loation within reah. If any problems our during installation, turn off the internal wiring immediately. Note the following when handling the power able. Otherwise, it ould ause a fire or eletri shok. Do not handle the plug with wet hands Do not use a damaged or modified power able Do not apply exessive fore to the power able Do not trap the able between parts of the mount and so on during installation When installing, do not pull or apply exessive fore to the able onneted to the projetor. Do not wind ables around the projetor or the mount. When wiring ables and so on, route the ables so that it avoids the srews and bolts. If the ables ome into ontat with srews or bolts, it ould ause a fire or eletri shok to our. Make sure you tighten the srews or bolts ompletely when installing. If they are not tightened ompletely, the mount or the projetor ould fall ausing injury or aident to our. Never loosen the srews or bolts after installation. Make sure that you hek for any loose srews or bolts on a regular basis, and if any are loose, tighten them ompletely. If they are not tightened ompletely, the mount or the projetor ould fall ausing injury or aident to our. When seuring the mount, do not use adhesives to prevent the srews from loosening, and do not use lubriants, oils, and so on. If you use adhesives to prevent the srews from loosening, or if you use things suh as lubriants or oils, the mount or the projetor ase may rak ausing an injury or an aident. Do not hang from the mount or the projetor, and do not plae heavy objets on them. Otherwise, the mount or the projetor may fall and ould ause death or injury. Do not apply exessive fore to the projetor or the mount when installing. Otherwise, the mount or the projetor may be damaged and ould ause death or injury. Do not install in the following situations. Contat your loal dealer or Epson Servie Call Center. If the produt has been dropped or damaged before or during installation If the mount is abnormal or damaged 2

4 Using the Produt Safely Warnings and Cautions on the Installation Loations Do not attah this mount to the floor. This mount an only be installed on a eiling or a wall. Warning Chek the struture and material of the surfae to whih the mount will be installed, and use the optimum installation method. Make sure the surfae to whih the mount will be installed is strong enough. The total maximum weight of the projetor and Diret Mount is approximately 7.0 kg (approx. 5.1 kg for the projetor/approx. 1.9 kg for the Diret Mount) (not inluding ables). Do not install the mount or projetor in an unstable loation where it might be subjeted to vibrations or shoks. The surfae to whih the mount is attahed may be damaged. Also, the mount or projetor may fall and ause an injury or aident to our. Do not install or use the projetor in loations where it ould be exposed to rain or water, suh as outdoors, in baths or shower rooms. Otherwise, it ould ause a fire or eletri shok. Do not use the projetor in a loation subjet to ombustible or explosive gas. If the inside of the projetor gets too hot, it ould ignite and ause a fire. Do not over the projetor's air intake vent or air exhaust vent. If either of the vents are overed, the projetor's internal temperature ould rise and ause a fire. Caution Do not install the projetor in a loation outside the projetor's operating temperature range. Suh an environment may damage the projetor. Install it away from air outlets suh as air onditioners. If the air from an air onditioner and so on flows diretly over the projetor, the temperature rises and the projetor may not operate orretly. Install it away from fluoresent lights. Some kinds of fluoresent lights ould interfere with the remote ontrol of the projetor. Install it in a loation where strong light suh as fluoresent light and diret sunlight does not shine on the remote reeiver. If strong rays of light shine on the remote reeiver, remote ontrol operations may not be performed orretly. Make sure you install the projetor in a loation free from exessive dust and humidity to prevent the lens or internal omponents from beoming dirty. Display Position of Manufaturers Nameplate The produt nameplate is displayed on the top of the projetor as shown below. Before installing the mount to the projetor, hek the numbers on the produt nameplate. 3

5 Using the Produt Safely Rated Voltage Rating Frequeny Rating Current V 50/60 Hz A Installation Orientation Chek the following points when installing on a wall or a eiling that is inlined. Do not fae the power inlet upward Corret (power inlet faing down) Inorret (power inlet faing up) Do not turn the power supply sideways Inorret (power supply faing sideways) 4

6 Contents Using the Produt Safely Safety Instrutions... 1 Safety Indiations... 1 General Information Indiations... 1 Preautions on Installing the Projetor Warnings and Cautions on the Installation Loations... 3 Display Position of Manufaturers Nameplate... 3 Installation Orientation... 4 Preparing the Projetor Pakage Contents Connetable Devies and Neessary Cables... 7 Projetion Distane Table :10 projeted image :3 projeted image :9 projeted image Installation Proedure Preparing the Projetor Attahing the Projetor Mount to the Projetor Attahing the Ceiling Mount to a Ceiling or a Wall Installing the Safety Wire Combining the Projetor Mount with the Ceiling Mount Conneting Cables Adjusting the Orientation of the Projetor Attahing the Covers Attahing the Power Adapter Cover...20 Attahing the Mount Cover Appendix Speifiation Appearane Assembly Dimensions

7 Preparing the Projetor Pakage Contents Chek that you have all of the following aessories before you start work. Projetor mount (*1) Ceiling mount (*1) Mount over (*2) Safety wire (500 mm) Wire hook mount Shape Name Quantity M4 x 12 mm ross reessed head srew (with washer) Appliation 4 Seures the projetor mount to the projetor. (4) Combines and seures a projetor mount and a eiling mount. *1 The projetor mount and the eiling mount are ombined and seured by these srews temporarily at the time of purhase. Unsrew them before installing. M3 x 6 mm ross reessed head srew (2) Seures the mount over. Make sure you use the bolts or srews supplied with this produt to install mounts. Gather the tools and parts you need before you begin installation. *2 The mount over is seured by these srews temporarily at the time of purhase. Unsrew them before installing. 6

8 Preparing the Projetor Connetable Devies and Neessary Cables Be sure to prepare the power able supplied. Additionally, prepare the neessary ables aording to the devies being used. Connets the power able to the projetor. Connets the projetor to a network hub and so on using a LAN able. Connets the projetor to a omputer or video soures with an HDMI able. Seure it with the able lamp supplied to prevent the HDMI able from disonneting under its own weight. Insert an SD ard into this slot. Connets to a speaker with an audio able. 7

9 Preparing the Projetor Projetion Distane Table To find the appropriate projetion distane, see the following figures when installing. The values are only rough estimates. H H W W : Projetion Distane : Center of lens 8

10 Preparing the Projetor 16:10 projeted image Projeted image size Projetion Distane Minimum (Wide) to Maximum (Tele) 30" 640x " 860x " 1080x " 1290x " 1720x " 2150x " 2580x " 2860x " 3230x [Unit: mm] The values are only rough estimates. The value may differ depending on the loation where you plae the projetor. When projeting in Tele, the quality of the projeted images may derease. 9

11 Preparing the Projetor 4:3 projeted image Projeted image size Projetion Distane Minimum (Wide) to Maximum (Tele) 30" 610x " 810x " 1020x " 1220x " 1630x " 2030x " 2440x " 2700x " 3050x " 4060x [Unit: mm] The values are only rough estimates. The value may differ depending on the loation where you plae the projetor. When projeting in Tele, the quality of the projeted images may derease. 10

12 Preparing the Projetor 16:9 projeted image Projeted image size Projetion Distane Minimum (Wide) to Maximum (Tele) 30" 660x " 890x " 1110x " 1330x " 1770x " 2210x " 2940x " 3320x " 4430x " 5530x [Unit: mm] The values are only rough estimates. The value may differ depending on the loation where you plae the projetor. When projeting in Tele, the quality of the projeted images may derease. When projeting at an aspet ratio of 16: 9, the top edge of the projeted image shifts from the enter of the lens. 11

13 Installation Proedure Preparing the Projetor Adjust the orientation of the projetor to make installing easier. a b Plae the projetor on a flat surfae on a soft loth. Loosen the srew for the ball joint with a hexagonal wrenh supplied. Change the projetor's orientation. You an hange the orientation of the projetor as shown below. d Tighten the srew for the ball joint with a hexagonal wrenh to seure it in plae. Make sure you tighten the srew ompletely so that the ball joint does not move during installation. 12

14 Installation Proedure Attahing the Projetor Mount to the Projetor a Plae the projetor on your workbenh. Plae the projetor on a soft loth on a workbenh (330 mm high). b Plae the projetor mount on the projetor. Align the srew holes on the projetor's Diret Mount fixing points with the srew holes on the projetor's mount. 13

15 Installation Proedure Seure the projetor mount to the top of the projetor using the M4 x 12 mm srews supplied (x4). Caution Make sure you use the srews supplied. 14

16 Installation Proedure Attahing the Ceiling Mount to a Ceiling or a Wall Chek the position where you want to projet the image, and determine the mounting position for the eiling mount. s"projetion Distane Table" p.8 Make sure you take into onsideration the struture (strength and so on) of the eiling or wall on whih you will install the eiling mount. Make sure you aquire ommerially available items to be used for installation. Mounting hole positions and dimensions Anhor bolt mounting hole (M10) Wood srew mounting hole (nominal diameter 4.1) 15

17 Installation Proedure Installing the Safety Wire Install the safety wire supplied to prevent the projetor from falling. Caution Attah the wire firmly so that it annot ome loose. a Attah the wire hook mount supplied to the eiling or the wall. When installing the wire hook mount, use ommerially available wood srews with a nominal diameter of 3.8 mm. Make sure that the wood srews enter at least 20 mm into the eiling or underlying wall. b Loosen the arabiner for the safety wire supplied. Insert the loosened arabiner through the shaft of the eiling mount, and then tighten. d Attah the arabiner for the safety wire to the wire hook mount attahed to the eiling or the wall. 16

18 Installation Proedure Combining the Projetor Mount with the Ceiling Mount a Fit the groove for the projetor mount over the shaft for the eiling mount. b Slide the projetor mount along the groove. Make sure that the opposite side of the projetor mount fits into the hook setion of the eiling mount. Insert the protruding setion for the projetor mount into the hole on the eiling mount. d Seure the projetor mount to the eiling mount using the M4 x 12 mm srews supplied (x4). 17

19 Installation Proedure Conneting Cables a Connet the power able to the projetor's power inlet. Seure it with the able lamp supplied to prevent the power able from disonneting under its own weight. If there is enough spae inside the mount, you an store any able left hanging out as shown below. Make sure the able does not get damaged on the edges of anhor bolts and so on. b Connet the neessary ables and the SD ard to the projetor's interfae. s"connetable Devies and Neessary Cables" p.7 18

20 Installation Proedure Adjusting the Orientation of the Projetor Use the ball joint to adjust the orientation and the angle of the projetor. a Loosen the srew for the ball joint with a hexagonal wrenh. b Adjust the orientation of the projetor. When you have finished making adjustments, seurely tighten the srew for the ball joint setion with a hexagonal wrenh. After adjusting the orientation of the projetor, turn on the power and adjust the size and fous of the projeted image. For more details, see the User's Guide supplied with the projetor. 19

21 Installation Proedure Attahing the Covers Attahing the Power Adapter Cover Attah the power adapter over supplied to the projetor. Attahing the Mount Cover a Insert the mount over into the left and right grooves on the projetor mount. b Seure the mount over using the M3 x 6 mm srews supplied (x2). 20

22 Appendix Speifiation Item Weight (projetor mount, eiling mount, mount over) Maximum load apaity Approx. 1.9 kg Approx. 7.4 kg Speifiation Appearane Without the mount over 407 [Unit: mm] With the mount over attahed

23 Appendix Assembly Dimensions SEIKO EPSON CORPORATION All rights reserved. 22