ST75- Order Information Sheet (OIS) Air/Gas Flow Meter

Size: px

Start display at page:

Download "ST75- Order Information Sheet (OIS) Air/Gas Flow Meter"

Letitia Owen
5 years ago
Views:

1 1755 a osta eadows Drive San aros, alifornia US / ax: Order Information Sheet (OIS) ST75 ir/gas low eter ST75- lok o ISTRUTIOS: To order an ST75, please fill in eah numbered blok above with the appropriate ode from the ategories below. One you have determined all the speifiations, ontat an I representative or I diretly for prie information or additional options not shown. onsult I on the ost of speial data and doumentation. inal aeptane of the part number is subjet to I s approval. ase Unit, nlosure Style (nlosures: all aluminum, 4X/IP67 rated, epoxy oated) (lok 1) lind, Integral Transmitter, with two 1/2 PT able entries 1 Integral Transmitter with oal Digital Display, with two 1/2" PT able entries 2 Remote Transmitter with two 1/2 PT able entries and with Digital Display (speify able length in lok 7) 4 lind, Integral Transmitter, with two 20x1.5 able entries Integral Transmitter with oal Digital Display, with two 20x1.5 able entries Remote Transmitter with two 20x1.5 able entries and with Digital Display (speify able length in lok 7) Pipe Installation, Display/Transmitter ounting Orientation and low Diretion (lok 2) Horizontal Pipe Vertial Pipe Top mount, display faing forward, flow left-to-right Side mount left, display faing forward, flow up Top mount, display faing forward, flow right-to-left G Side mount right, display faing forward, flow up Side mount, display faing up, flow left-to-right H Side mount left, display faing forward, flow down P Side mount, display faing up, flow right-to-left J Side mount right, display faing forward, flow down R Side mount, display faing down, flow left-to-right Side mount, display faing down, flow right-to-left or visual representation, refer to I drawing number Power Supply (lok 3) D; V 1 ; V, 50/60 Hz 2 ine Size and Proess onnetion (lok 4) Tee ody ength 1/4 PT, 150 lb pipe tee 1.54 [39,12 mm] 1/2 PT, 150 lb pipe tee 2.28 [57,91 mm] 3/4 PT, 150 lb pipe tee 2.56 [65,02 mm] 1 PT, 150 lb pipe tee 2.92 [74,17 mm] D 1 1/2 PT, 150 lb pipe tee 3.82 [97,03 mm] 2 PT, 150 lb pipe tee 4.66 [118,40 mm] 1/4 Tubing Tee with ompression ittings for use with 1/4 Tubing 2.34 [59,44 mm] G 1/2 Tubing Tee with ompression ittings for use with 1/2 Tubing 2.84 [72,14 mm] H 1 Tubing Tee with ompression ittings for use with 1 Tubing 3.86 [98,04 mm] J Gas edium and System alibration in tual Tee itting 1 (lok 5) ir ir quivalene (Oxygen, hlorine, mmonia, et.) itrogen, Helium, rgon, O 2, ompressed ir Hydroarbons (e.g. atural Gas, thane, ethane, Propane, thylene, Propylene, ixed) ir, ompressed ir ir quivalene (e.g. Oxygen, hlorine, mmonia, et.) itrogen, rgon O 2, thylene, thane Propane, Propylene utane, Pentane ethane, Helium, atural Gas alibration 2 and alibration Temperature onditions (lok 6) Standard 2% alibration and onditions +40 to 100 / [4 to 38 ] 0 Standard 2% alibration and xtended Temperature ompensation 0 to 250 [-18 to 121 ] High uray 1% alibration and Standard onditions +40 to 100 [+4 to 38 ] High uray 1% alibration and xtended Temperature ompensation 0 to 250 [-18 to 121 ] Interonneting able ength for Remote onfigurations 3 (lok 7) ot required (speify with integral onfigurations) 0 10 [3 meters] 25 [7,6 meters] 50 [15 meters] ustom length. (annot exeed 50 [15 meters]) Options and essories otes 1. ust use I s V program to determine letter ode. V is a ustom flow meter optimizer program that onsiders gas medium, flow range, pipe size and other onditions to determine best alibration and supplies. I letter ode to be used here. V is available on-line at or onsult a loal I representative/ distributor. 2. alibration auray is ±% of reading, ±0.5% of full sale. 3. ixed able length with instrument alibrated together as a mathed set. able may be oiled but not ut. ertified aterial Test Report (TR) not available with ST75, see ST75V if required. Part umber Desription Part umber Desription Software Interfae Pakage for PD/PalmOS D10-IT1 Panel ount it for D PD, Palm model Tungsten T 2 D10-IT2 2 (52 mm) Pipe ount it for D10 (Stainless steel) 88 Portable Hand-held ommuniator D15 Digital Display/Readout, D 115/230 Va powered P Interfae ommuniations it, or RS232 serial port onnetion D15- Same as D-15 with user programmable alarm limit, relay output D10- Digital Display/Readout, D, 4-20m loop powered D20 Digital Display Readout, 8-digit D Pulse totalizer/ounter D10- D10 with and S approvals H J P opyright 2009 luid omponents International. ll rights reserved. Subjet to hange without notie. Do. o. 01S011466

ST75V ass low eter with Vortab low onditioners ST75V Speifiations emale PT Vortab low onditioners ST75V Speifiations Preision ass low eters ompatible with ine Sizes from 1/4 to 2 [6 to 51mm] for

odel ST75 V provides the solution. I s odel ST75V inludes all of the features and funtionality of the ST75 plus built-in Vortab flow onditioning.

2 ST75V ass low eter with Vortab low onditioners ST75V Speifiations emale PT Vortab low onditioners ST75V Speifiations Preision ass low eters ompatible with ine Sizes from 1/4 to 2 [6 to 51mm] for Industrial and ommerial Proess Gases or installations with inadequate straight-run or obstruted flows that prevent a fully developed profile for aurate flow measurement with the standard ST75, the odel ST75 V provides the solution. I s odel ST75V inludes all of the features and funtionality of the ST75 plus built-in Vortab flow onditioning. Vortab flow onditioners are the flow onditioning tehnology proven and reommended by flow measurement experts to eliminate both swirl and veloity profile distortions to ensure aurate flow measurement. Vortab flow onditioners also are the lowest pressure loss solution of all flow onditioning tehniques. I is the exlusive provider of Vortab flow onditioners for use with thermal mass flow meters suh as the ST75V. In appliations with limited spae for pipe straight-run or when obstrutors suh as valves, bends, ouplings or any other disturber whih alters the flow profile are present, the ST75V is the solution to ensure the highest auray and repeatability. Proess onnetions: hoie of emale PT, ale PT, SI flanges, DI flanges edia ompatibility: ir, ompressed air, nitrogen, oxygen, argon, O2, ozone, other inert gases, natural gas and other hydroarbon gases, hydrogen. uray: ±1% of reading, ±0.5% full sale Repeatability: ±0.5% Temperature ompensation: Standard: 40 to 100 [4 to 38 ] Optional: 0 to 250 [ -18 to 121 ] Turndown Ratio: 10:1 to 100:1 geny pprovals: /S: lass 1, Div. 1, Groups,,D; lass 1, Div. 2, Groups -D TX/Ix: Zone 1, II 2 G x d II T6 T3; II 2 D x td 21, IP67 T90 T300 lement aterials of onstrution: ll-welded 316 Stainless Steel with Hastelloy- thermowells. nlosure: 4X [IP67], aluminum, dual onduit ports with either ½ inh PT or 20x1.5 entries. poxy oated. Output Signal: Standard: (2) 4-20 m, user assignable to flow rate and/or temperature (1) Hz pulse for total flow aximum Operating Pressure: 240 psi [16.5 bar(g)] Input Power: D: 18 Vd to 36 Vd (6 atts maximum) : 85 Vd to 265 Va 85 to 265 Va (12 atts maximum) ( approval for 100 Va to 240 Va) Operating Temperature Range: 0 to 140 [ -18 to 60 ] Digital Display (Optional): Two-line x 16 haraters D. Displays measured value and engineering units. Top line assigned to flow rate. Seond line is user assignable to temperature reading, as flow totalizer or alternating. Display an be rotated in 90 inrements for optimum viewing orientation. onfiguration ale PT langed emale PT onfiguration DI Top to low DI low to ottom DI D VR ength ST75V-XXX 1/ [140] 0.38 [9,5] 5.00 [127] ST75V-XXX 1/ [144,5] 0.57 [14] 7.50 [190,5] ST75V-XXX 3/ [164] 0.69 [17,5] 9.00 [229] ST75V-XXXG [163,5] 0.88 [22] 9.00 [229] ST75V-XXXH 1 1/ [163] 1.25 [32] [343] ST75V-XXXJ [163] 1.50 [38] [457] onfiguration ale PT onfiguration DI Top to low DI low to ottom DI D Tee ength ST75V-XXX 1/ [140] 0.38 [9,5] 5.00 [127] ST75V-XXX 1/ [144,5] 0.42 [10,6] 7.50 [190,5] ST75V-XXX 3/ [164] 0.51 [13] 9.00 [229] ST75V-XXXG [163,5] 0.65 [16,5] 9.00 [229] ST75V-XXXH 1 1/ [163].95 [24] [343] ST75V-XXXJ [163] 1.19 [30] [457] onfiguration langed onfiguration DI Top to low DI low to ottom DI D Tee ength ST75V-XXX 1/4 n/a n/a n/a ST75V-XXX 1/ [144,5] 1.75 [45] 7.50 [190,5] ST75V-XXX 3/ [164] 1.94 [49] 9.00 [229] ST75V-XXXG [163,5] 2.12 [54] 9.00 [229] ST75V-XXXH 1 1/ [163] 2.50 [64] [343] ST75V-XXXJ [163] 3.00 [76] [457] Page 1 of 2

3 ORDRIG GUID: ST75V ass low eter with Vortab low onditioners odel ST75V- ase Unit, nlosure Style (lok 1) nlosures: ll luminum, 4X/IP67 rated, epoxy oated lind, Integral Transmitter, with two 1/2 PT able entries 1 Integral Transmitter with oal Digital Display, with two 1/2 PT able entries Remote Transmitter w/ two 1/2 PT able entries and w/digital Display. (Speify able length in lok 10) lind, Integral Transmitter, w/ two 20x1.5 able entries Integral Transmitter with oal Digital Display, w/ two 20x1.5 able entries Remote Transmitter w/ two 20x1.5 able entries and w/digital Display. (Speify able length in lok 10) Power Supply (lok 3) D; V 1 ; V, 50/60 Hz 2 ine Size (lok 4) 1/4 (vailable only with PT, lok 5 must be or ) 5 1/2 3/4 1 G 1-1/2 H 2 J Proess onnetion Type (lok 5) emale PT ale PT langed, #150 SS lok o Pipe Installation, Display/Transmitter ounting Orientation and low Diretion (lok 2) Horizontal Pipe Vertial Pipe Top mnt, display fae frwd, flow -R Side mnt, display fae frwd, flow up Top mnt, display fae frwd, flow R- G Side mnt R, display fae frwd, flow up Side mnt, display fae up, flow -R H Side mnt, display fae frwd, flow down P Side mnt, display fae up, flow R- J Side mnt R, display fae frwd, flow down R Side mnt, display fae down, flow -R or visual representation, refer to I drawing Side mnt, display fae down, flow R- number Other; ageny approved, ustomer speified (If seleted, lok 6 and 7 whih follow must also be only) Proess onnetion Size, aterial, Rating, inish Details (lok 6 & 7) 1/4 PT (must be seleted if lok 4 is ) Q0 1/2 PT H0 3/4 PT T0 1 PT /2 PT 0 2 PT 20 1/2 SI flanged 150 lb R SI 16.5, 316 Stainless steel HG 3/4 SI flanged 150 lb R SI 16.5, 316 Stainless steel TG 1 SI flanged 150 lb R SI 16.5, 316 Stainless steel 1G 1-1/2 SI flanged 150 lb R SI 16.5, 316 Stainless steel G 2 SI flanged 150 lb R SI 16.5, 316 Stainless steel 2G D15 DI flanged P40, orm per DI2526 or orm 1 per DI in 316 ss D25 DI flanged P40, orm per DI2526 or orm 1 per DI in 316 ss D40 DI flanged P40, orm per DI2526 or orm 1 per DI in 316 ss D50 DI flanged P16, orm per DI2526 or orm 1 per DI in 316 ss Other; ageny approved, ustomer speified 2 4 D2 2 G2 J2 Gas edium and System alibration 2 (lok 8) ir ir quivalene (Oxygen, hlorine, mmonia, et.) itrogen, Helium, rgon, O2, ompressed ir Hydroarbons (e.g. atural Gas, thane, ethane, Propane, thylene, Propylene, ixed) Hydrogen or hydrogen mixture ir, ompressed ir ir quivalene (e.g. Oxygen, hlorine, mmonia, et.) itrogen, rgon O2, thylene, thane Propane, Propylene utane, Pentane ethane, Helium, atural Gas Hydrogen alibration 3 and alibration Temperature onditions (lok 9) High uray 1% alibration and Standard onditions +40 to 100 [+4 to 38 ] w/vortab High uray 1% alibration and xtended Temperature ompensation 0 to 250 [-18 to 121 ] w/vortab Other, geny approved,ustomer speified Interonneting able ength for Remote onfigurations 4 (lok 10) ot required (Speify with integral onfiguations) 0 10 [3 meters] 25 [7,6 meters] 50 [15 meters] ustom length (annot exeed 50 [15 meters]) Part umber Desription Software Interfae Pakage for PD/PalmOS PD, Palm model Tungsten T 2 88 Portable Hand-held ommuniator P Interfae ommuniations it, or RS232 serial port onnetion D10- D10- D10-IT1 D10-IT2 D15 D15- D20 otes Digital Display/Readout, D, 4-20 m loop pow D10 with and S approvals Panel ount it for D10 Optional essories 2 inh (52 mm) Pipe ount it for D10 (Stainless steel) Digital Display/Readout, D 115/230 Va powered Same as D-15 with user programmable alarm limit, relay output Digital Display Readout, 8-digit D Pulse totalizer/ounter G H J P R Q T 2. ust use I s V program to determine letter ode. V is a ustom flow meter optimizer program whih onsiders gas medium, flow range, pipe size and other onditions to determine best alibration and supplies I letter ode to be used here. V is available on-line at or onsult loal I representative/distributor. 3. alibration auray is ±% of reading, ±0.5% of full sale. 4. ixed able length with instrument alibrated together as a mathed set. able may be oiled, but not ut. 5. ertified aterial Test Report (TR) not available with ST75V 1/4. oally Represented y: Visit I on the orldwide eb: Headquarters: 1755 a osta eadows Drive San aros, alifornia US Phone: Toll ree: ax: uropean Offie: Persephonestraat TT Tilburg, The etherlands Phone: ax: I is ISO 9001:2000 and S9100 ertified Do. o D opyright 2009 by luid omponents International. ll rights reserved. anufatured in aordane with one or more of the following patents: US Patent umbers: 4,929,088, 4,967,593, 4,981,368, 4,994,780, 5,111,692, 5,600,528, 5,780,737, 5,913,250, 6,208,254, 6,340,243, 6,628,202, 6,843,110, hina Patent umber: Z I is a registered trademark of luid omponents International. Information subjet to hange without notie.

4 1755 a osta eadows Drive San aros, alifornia US / ax: ppliation Data Sheet (DS) ST75 Series low eter ustomer Information ustomer ame: ddress: ontat ame: Phone: ax: mail: ppliation Desription Proess Details Desribe type of appliation (example: furnae natural gas line, et.): Proess edia Inlude gas name and perent omposition by volume (moles) or weight (mass). Please attah a gas omposition list or fill in omposition below. Total omposition must add up to 100%. Gas omponents: % Volume (moles) % eight (mass) Proess onditions ormal inimum aximum ngineering Units low Rate: Temperature: Pressure: Required Dimensions (Inlude units of measure inhes, mm, et.) 1. Pipe/Dut Size: a) Outside Diameter: b) Inside Diameter: 2. ength of straight-run available: 3. Desribe nearest upstream and downstream disturbane: a) Upstream: b) Downstream: Other notes about installation: P.O. o.: ustomer Order o.: odel umber Ordered: Tag umbers: Instrument Details low lement ounting or visual representation, refer to I drawing number Horizontal : Top mount, display faing forward, flow left-to-right G: Top mount, display faing forward, flow right-to-left H: Side mount, display faing up, flow left-to-right J: Side mount, display faing up, flow right-to-left : Side mount, display faing down, flow left-to-right : Side mount, display faing down, flow right-to-left Vertial : Side mount left, display faing forward, flow up : Side mount right, display faing forward, flow up P: Side mount left, display faing forward, flow down R: Side mount right, display faing forward, flow down Transmitter Setup Input Power: 115 Va 230 Va 24 Vd Signal Outputs Parameter: ng. Units: Zero Value: ull Sale: Signal Output 3 ST75 Output 1 Output m low (default) Temperature 4 m = 20 m = Pulse Totalizer Output: 4-20 m Temperature (default) low 4 m = 20 m = Set as 1 pulse per flow engineering unit Other must be preapproved by I and desribed here: Standard Temperature and Pressure 70 and 14.7 psia [21.1 and bar(a)] is the fatory alibration default for standard temperature and pressure unless otherwise indiated below. Temperature Pressure Other: opyright 2009 luid omponents International. ll rights reserved. Subjet to hange without notie. Do. o. 01S011458

FCI ST75 Series Flow Meters

FCI ST75 Series Flow Meters Small Line, Mass Flow Meters for Industrial and Commercial Process Gases Low cost, easy installation flow measuring for 1/4 inch to 2 inch [6 mm to 51 mm] line sizes FCI ST75