T-35/T-57 MARK II TURBO-METER GENERAL ASSEMBLY
|
|
- Collin Palmer
- 5 years ago
- Views:
Transcription
1 MP-G-TBO-10-70B A 6" Model T-35/T-57 Mark II Turbo-Meter Parts List Working Pressures: 175, 275, 720, 1440 psi 12a a a PL T-35/T-57 MARK II TURBO-METER GENERAL ASSEMBLY b a b 56 T-57 ONLY 720/1440# 97 **720/ **720/1440 PL INDEX SHAFT GLAND ASSEMBLY a 11 12a PL a 64 ROTOR BRACKET AND WORM WHEEL ASSEMBLY (VIEW FROM INLET END) PL *This doument replaes MP-1070B-R10
2 6" Model T-35/T-57 Mark II Turbo-Meter NOTE: H.P. designates 275, 720 and 1440 W.P.s Illustration Number Quantity Required Part Desription Part Number Main Body Assembly, AL, 175# W.P. with Badges, Less Nose Cone Main Body Assembly, C.S. 275# W.P. ANSI 150 with Badges, Less Nose Cone Main Body Assembly, C.S. 720# W.P. ANSI 300 with Badges, Less Nose Cone Main Body Assembly, C.S. 1440# W.P. ANSI 600 with Badges, Less Nose Cone Main Body Assembly, C.S. 1440# W.P. ANSI 600 with R.J. Flanges, with Badges, Less Nose Cone Nose Cone with Straightening Vanes, 175# W.P. Molded Nose Cone with Straightening Vanes, All H.P. Molded Nose Cone Retainer #8-32 x ⅜" Long Truss Head Stainless Steel Mahine Srew Manufaturer Nameplate, 175# W.P. Manufaturer Nameplate, 275# W.P. Manufaturer Nameplate, 720# W.P. Manufaturer Nameplate, 1440# W.P. T T T T T T T T #4 x 3 16" Long Round Head Br. Dr. Srew * 1 Top Plate to Body, O-ring, 175# W.P., Buna-N Top Plate to Body, O-ring, 175# W.P., Viton-A (Optional) Top Plate to Body, O-ring, H.P., Buna-N Top Plate to Body, O-ring, H.P., Viton-A (Optional) A/R Steel Pipe Plug ¼", -20, All W.P b 1 ¼" x 45 Street Ell. Stainless Steel, -20, All H.P Index Plate Assembly (Inludes Illustrations 9, 10, 11 and 13) Index Plate Index Drive Shaft Assembly (Inludes Illustrations 12, 14 and 15) Index Shaft Gland Assembly (Inludes Illustrations 11a-) a 1 Index Shaft Gland b 1 Top Bushing Bottom Bushing Index Shaft a 1 Retaining Ring Bottom Index Shaft Dog Top Index Shaft Dog * 1 Shear Pin, Top Index Shaft Dog * 1 Gasket, Index Plate to Top Plate Cap Srew, Index Plate to Top Plate, 5 16"-18 x ¾" Long Hex Head Steel Seal Srew, Index Plate to Top Plate, 5 16"-18 x ¾" Long Hex Head Steel * Reommended Spare Parts. Top Plate Assembly, Aluminum, 175# W.P. (All Top Plates are Drilled for Saturable Core Pulse Generator and Inlude Oil Tubing) Top Plate Assembly, ANSI 150, 275# W.P. Steel Top Plate Assembly, ANSI 300 and 600, 720# and 1440# W.P. Steel T T
3 6" Model T-35/T-57 Mark II Turbo-Meter (Continued) Illustration Number 20 Quantity Required * Part Desription Part Number 7 Cap Srew, Top Plate to Body, 175# W.P., ½"-13 x 1½", Hex Head Steel Gr Cap Srew, Top Plate to Body, 275# W.P., ½"-13 x 1⅜", Hex Head Steel Gr Cap Srew, Top Plate to Body, 720# and 1440# W.P., ¾"-10 x 2½", Hex Head Steel Gr Seal Srew, Top Plate to Body, 175# W.P., ½"-13 x 1½", Hex Head Steel Gr Seal Srew, Top Plate to Body, 275# W.P., ½"-13 x 1⅜", Hex Head Steel Gr Seal Srew, Top Plate to Body, 720# and 1440# W.P., ¾"-10 x 2½", Hex Head Steel Gr Intermediate Gear Train, 100 CF/REV. Output Intermediate Gear Train, 1000 CF/REV. Output Intermediate Gear Train, 10.0 M 3 /REV. Output Intermediate Gear Train, 1.0 M 3 /REV. Output Large Change Gear NOTE: "xx" Refers to Gear Blank Size, "yy" Refers to Number of Gear Teeth Digits Must Be Substituted for Both "xx" and "yy" in Ordering. See Drawing SD-1034-C xx-yy 25 1 Small Change Gear (See NOTE Above) xx-yy 26 1 Intermediate Gear Output Dog (Top) a 1 Intermediate Gear Driver Dog (Bottom) #4-40 Hex Stainless Steel Nut #8-32 x ⅜" Long Fillister Head Stainless Steel Mahine Srew * 1 Follower Magnet Assembly (Inludes Magnet and Illustrations 29b-d) Follower Magnet Assembly for Units with Slot Sensor (Inludes Magnet and Illustrations 29b-d) b 1 Retaining Ring Bearing d 1 Spaer * 1 31* 1 Magnet Well and Post Assembly, 175# and 275# W.P Magnet Well and Post Assembly, 720# and 1440# W.P Magnet Well O-ring, Buna-N Magnet Well O-ring, Viton (Optional) * 1 Magnet Holder and Bearing Assembly (Inludes Illustrations 32a-d) a 1 Magnet Holder and Groove Pin Assembly (with Magnet) b 1 Retaining Ring Bearing d 1 Spaer Complete Internal Housing Assembly, Calibrated with Change Gears, All Pressures. (Inludes Illustrations 34, 35, 36, 39, 40, 41 and 77) with Viton Seals As Above, with Buna-N Seals T-35 LP T-35 HP T-57 LP T # T /1440# ** T-35 LP T-35 HP T-57 LP T # T /1440# ** Internal Housing and Adapter Plate Assembly, All Pressures (Inludes Illustrations 42, 43 and 44) * Reommended Spare Parts. ** T-57, 720/1440# 302 Assemblies Inlude Items 96 and 97. 3
4 b d a a a PL FOLLOWER MAGNET AND BEARING ASSEMBLY 39 b d 32 a PL ROTOR, BRACKET AND INTERNAL HOUSING ASSEMBLY PL DRIVER MAGNET HOLDER AND BEARING ASSEMBLY Rotor Lok Nut Spherial Washer Loking Pin Housing Rotor Hub PL ROTOR TO SHAFT ASSEMBLY 6" T-35/T-57 4
5 6" Model T-35/T-57 Mark II Turbo-Meter (Continued) Illustration Number Quantity Required 35* 1 Part Desription Rotor Braket and Worm Wheel Assembly (Inludes Illustration 38 plus 45, 46, 47, 47a, 48, 49, 51-71) Part Number T T Internal Housing Plate Assembly (Inludes Illustrations 37, 59 and 65) Internal Housing Plate Drive Gear 39* 1 40* 1 29T, T T, T Seal, Buna-N Seal, Viton (Optional) Seal, Buna-N Seal, Viton (Optional) #10-24 x ¾" Round Head Stainless Steel Mahine Srew a 2 Lokwasher, Ext. 3 16" Steel Internal Housing (with Oil Tubing) Adapter Plate and Bushing Assembly Retaining Ring Bearing Braket and Pin Assembly Rotor and Insert Assembly, All Pressures T T Upstream Bearing Retainer a 2 Lokwasher #4-40 x ⅜" Long Fillister Head Stainless Steel Mahine Srew Downstream Bearing Retainer Plate Gear Post Gear Retainer Oil Reservoir Cover Plate Worm Gear, Stainless Steel Worm Wheel Worm Wheel Collar Worm Wheel Shaft Idler Gear 44T, T T, T Filter Sreen, Stainless Steel Worm Wheel Shaft Bearing a 2 Worm Wheel Shaft Bearing Retainer Plate Upstream Rotor Shaft Bearing Downstream Rotor Shaft Bearing #6-32 x 5 32" Long Soket Stainless Steel Nylon Loking Set Srew #4-40 x ¼" Long Round Head Stainless Steel Mahine Srew a 4 #4-40 x ⅛" Long Round Head Stainless Steel Mahine Srew (Oil Reservoir Cover Plate Srews) Filter Sreen Retaining Ring Oiler Felt 0.09 x Rotor Shaft Rotor Loking Pin * Reommended Spare Parts. 5
6 6" Model T-35/T-57 Mark II Turbo-Meter (Continued) Illustration Number Quantity Required Part Desription Part Number 70 1 Spherial Washer Set Rotor Retaining Nut, #10-24 Hex Head Measuring Module, Complete, 175# W.P. (Inludes Illustrations 6, 19, 28-33, 74-80, 83, 84, 87 and 88), T-35 Measuring Module, Complete, 275# W.P. (Inludes Illustrations 6, 19, 28-33, 74-79, 83, 84, 87 and 88), T-35 Measuring Module, Complete, 720# and 1440# W.P. (Inludes Illustrations 6, 19, 28-33, 74-79, 83, 84, 87 and 88), T-35 Measuring Module, Complete, All W.P. (Inludes Illustrations 6, 19, 28-33, 74-80, 83, 84, 87 and 88), T-57 Contat Sensus Sales Rep. Contat Sensus Sales Rep. Contat Sensus Sales Rep. Contat Sensus Sales Rep. Coupling Shaft, 175# Coupling Shaft, All H.P #8-32 x ¾" Hex Head Stainless Steel Mahine Srew (Adapter Plate to Top Plate) * 1 Seal, Buna-N Seal, Viton (Optional) Tygothane Tubing, 3 16" O.D. x 0.031" Wall, 6" Long Vent Cap ¼" Assembly Nipple, ¼" x ¼" Hex Br., 175# W.P Nipple, ¼" x 3" Steel, Sh. 80, H.P ¼" Needle Valve, 175# W.P ¼" Needle Valve, All W.P Alemite Fitting ¼" x ⅛" Male to Female, Steel Bushing (Used with Illustration 83) Inlet Badge #2 x ⅛" Long Round Head Br. Drive Srew Manufature's Badge Affixed to Top Plate T T #0 x ⅛" Long Round Head Br. Drive Srew Oil, 1 Gallon Can Lubriation Hand Gun Blank Top Plate, 175# W.P Blank Top Plate, 275# W.P Blank Top Plate, 720# and 1440# W.P ¼" Stainless Steel Lokwasher ¼"-20 x ⅝" Long Soket Head Stainless Steel Cap Srew Cap, Probe Mounting Hole Cover, Stuffing Box #8-32 x 3 16" Round Head Steel Srew Compression Ring, Oil Line Oil, 4 oz. Bottle Compression Ring, 720# and 1440# (See Illustration on Page 2) T-57 Only ' Tubing, Pressure Tap, 720# and 1440# (See Illustration on Page 2) T-57 Only * Reommended Spare Parts. 6
7 PL Notes: 7
8 MP-G-TBO-10-70B A 6" Model T-35/T-57 Mark II Turbo-Meter Parts List Authorized Distributor: All produts purhased and servies performed are subjet to Sensus terms of sale, available at either or METER-IT. Sensus reserves the right to modify these terms and onditions in its own disretion without notie to the ustomer. This doument is for informational purposes only, and SENSUS MAKES NO EXPRESS WARRANTIES IN THIS DOCUMENT. FURTHERMORE, THERE ARE NO IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, WARRANTIES AS TO FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY. ANY USE OF THE PRODUCTS THAT IS NOT SPECIFICALLY PERMITTED HEREIN IS PROHIBITED Sensus. 805 Liberty Boulevard For more information, visit us at sensus.om/gas DuBois, PA
Parts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters
MP-1073C Rev. 3 Parts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters Parts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters Working Pressures: 175, 275, 720 & 1440 psig Copyright 2001 Invensys
More informationAuto-Adjust II Turbo-Meters
Sensus Metering Systems Auto-Adjust II Turbo-Meters " AAT-0 and " AAT-30 MP-03D R Parts List T H E G A S I N D U S T R Y 0 6 5 8 9 3 3 Pressue Tap All Working Pressures Body Assembly Components Main Body
More informationParts List 6 MODEL T-35 and T-57 Mark II Turbo-Meters with Blade Tip Sensors
MP-1070BS Metering Systems Parts List 6 Model T-35 and T-57 Mark II Turbo-Meter with Blade Tip Sensors Parts List 6 MODEL T-35 and T-57 Mark II Turbo-Meters with Blade Tip Sensors Working Pressures: 175,
More informationParts List 12 MODEL T-140 and T-230 Mark II Turbo-Meters with Blade Tip Sensors
MP-1070DS Metering Systems Parts List 12 Model T-140 and T-230 Mark II Turbo-Meter with Blade Tip Sensors Parts List 12 MODEL T-140 and T-230 Mark II Turbo-Meters with Blade Tip Sensors Working Pressures:
More informationRP-1350 Rev. 1. Parts List. Model 441-S Regulator. Parts List. Copyright 1999 Invensys Energy Metering
RP-1350 Rev. 1 Model 441-S Regulator Parts List Model 441-S Regulator Parts List Copyright 1999 Invensys Energy Metering DIAPHRAGM SIZE Nominal Inside Diameter A 7" Diaphragm 9 3 /4" 10" Diaphragm 13 1
More informationTurbo-Meters Mark-II and Auto-Adjust
Sensus Metering Systems MM-1070 R9 Turbo-Meters T H E G A S I N D U S T R Y Installation and Maintenance Instructions Sensus Metering Systems Turbo-Meters are designed for the measurement of gas. Proper
More informationHousing 3 GT/GTS Gas Turbine Meter
PL4802.2 Housing 3 GT/GTS Gas Turbine Meter 12 6 5 4 11 9 2 8 7 3 1 2 3 GT/GTS Gas Turbine Meter Housing Item No. Description Qty. Common To All Variations Part Numbers Product Variations 275 PSIG 1440
More informationC.Axial-Fan Cooled Twin Cylinder Engine
' F,0CKWELL Model F 00-6 (Sorpion C.Axial-Fan Cooled Twin Cylinder Engine SPARE PARTS LIST Bulletin SCP-770 General View Model F 00-6. ' I 0 / WHEN ING SPARE PARTS:. Indiate engine model number and serial
More informationSmith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7
Smith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7 Parts List Bulletin PO01018 Issue/Rev 0.1 (7/13) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 Page 2 SS01018 Issue/Rev.
More informationSmith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List
Issue/Rev. 0.0 (1/14) Smith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List Bulletin PO01023 *For meters which began shipping in 1993 to current. For meters shipped prior to
More informationMeter, PD Series, K12-S1, S3, S5, S6 and S7
PARTS LIST Meter, PD Series, K12-S1, S3, S5, S6 and S7 Bulletin PO01018 Issue/Rev. 0.4 (3/18) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 2 Bulletin PO01018 Issue/Rev. 0.4 (3/18) Item
More informationSPRING COLOR. Blue-black Black. Green-black Black Red-black Blue-black Green-black Green Orange. Red Red-black
BR-G-REG-1329-0313-01-A* Model 122 Industrial Combustion Regulators Construction and Design Features Model 122 Industrial Combustion Regulators For an unbeatable combination of capacity, performance and
More informationIMPORTANT!!!! Read this manual before attempting any installation, wiring or operation.
Industrial Turbo Meters Sizes 2" through 6" Installation & Operation Manual IMPORTANT!!!! Read this manual before attempting any installation, wiring or operation. BadgerMeter,Inc. IOM-003-15 Part No.
More informationIndustrial Turbo Meters, Sizes 2" through 6"
Industrial Turbo Meters Sizes 2" through 6" TUR-UM-00530-EN-19 (October 2014) User Manual Industrial Turbo Meters, Sizes 2" through 6" User Manual CONTENTS Scope of the Manual 5 Specifications 5 Product
More informationCATALOG OF REPLACEMENT PARTS GAS TILTING KETTLES MODEL
CATALOG OF REPLACEMENT PARTS GAS TILTING KETTLES MODEL VGLT-20 VGLT-30 VGLT-40 VGLT-60 ML-52994 ML-114955 ML-52995 ML-52996 For additional information on Vulcan-Hart Company or to locate an authorized
More informationPneumatic Corner Drill
Mashinenfabrik GmbH Pneumati Corner Drill Type 2 1701 0000 2 1701 0010 2 1701 0030 Teh. Do. No. 202 Illustration an differ from the original Operation and Maintenane Manual Spitznas Mashinenfabrik GmbH,
More informationWorkman 200 Spray System Heavy-Duty Workman Vehicles
Form No. 3366-881 Rev B Workman 200 Spray System Heavy-Duty Workman Vehicles Model No. 41235 Serial No. 310000301 and Up Register at www.toro.com. Original Instructions (EN) Ordering Replacement Parts
More informationIO-390-C Series Engine Illustrated Parts Catalog
IO-390- Series Engine Illustrated Parts atalog February 1, 2017 P-IO-390-2017 52 Oliver Street Williamsport, PA 17701 Lycoming Part Number: P-IO-390- For additional information: Mailing address: Lycoming
More information243 Service Regulators. Outlet Pressure Ranges and Springs. Basic Models. Pipe Size. Temperature Limits. Buried Service
BR-G-REG-1306-0313-01-A* Model 243 Service Regulators Construction and Design Features 243 Service Regulators These large capacity service regulators are designed and built for commercial, industrial,
More information200 Spray System Vehicles
Form Number 3353-714 Rev B Workman Heavy-Duty Workman 200 Spray System Vehicles Model No. 41235-260000001 and up. Parts Catalog Ordering Replacement Parts To order replacement parts, please supply the
More informationIssue/Rev. 0.3 (2/04) Bulletin P
Form No. P0906.03 E-Type Transmitter Parts List Issue/Rev. 0.3 (2/04) Bulletin P0906.03 (Previous Design) Switch and Network Assembly The Switch and Network Assembly is no longer available. To replace
More informationACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
More informationSection 8. Parts A Issued 7/00. Manual V -MA -01 (formerly 7-505/6V -MA -01) E 2000 Nordson Corporation All rights reserved
Section 8 E 000 Nordson Corporation 00 497A Manual 47-506V -MA -0 (formerly 7-505/6V -MA -0) 8-0 Manual 47-506V -MA -0 (formerly 7-505/6V -MA -0) 00 497A E 000 Nordson Corporation 8- Section 8. Introduction
More informationULTRALITE SPACEMATIC. Nutplate Drillmotor II/IIB DRILLING MACHINES
SPACEMATIC TM ULTRALITE DRILLING MACHINES Nutplate Drillmotor II/IIB One hand operation to locate, drill and countersink both rivet holes in a single 4 second operation. Tool is easily converted from one
More informationP-250 Rev. G P.D. Oscillating Piston Flowmeters: 2" Type 4-MT and MTSC Petroleum 2" Type 4D-MT LP Gas. Parts List for Petroleum and LPG Truck Meters
P-250 Rev. G P.D. Oscillating Piston Flowmeters: 2" Type 4-MT and MTSC Petroleum 2" Type 4D-MT LP Gas Parts List for Petroleum and LPG Truck Meters Type 4-MT Air Release 1 15 8 7 9 14 11 16 13 6 17 2 3
More information1021X-1022X 1021X-1022X COMPRESSOR QUIET-115V-60H & 220V-50H PART#:
# PARTS USED IN OMMON ASSEMBLY AND 1021/1022 OMPRESSORS (MODELS: 1021X, 1021P, 1022X, 1022P) 1 47 64 34 # PARTS USED IN 1022 OMPRESSORS - BOXED ITEMS REPLAE THE ORRESPONDING IRLE ITEMS (MODELS: 1022X,
More informationNotes: Figure 20- (Common Parts) Electrical Dia. Files Jw 103
Notes: Figure 20- (Common Parts) Electrical Dia. Files Jw 103 1 CHASSIS, CHANNEL, MAIN, ST, PAINTED, OIL FIRED 1 JD8000 2ASSY SEE FIG 1-8 BLOWER, AIR, ASSY, 6" OD X 4" W X 1/2" SHAFT 1 JB2000 3ASSY SEE
More informationSpray System Workman. Parts Catalog. Form Number Model No and up.
Form Number 3351-161 Spray System Workman 200 Model No. 41229-240000001 and up. Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number, the quantity, and the
More informationGearbox Service Kit Greensmaster
Form Number 3362-503 Rev A Gearbox Service Kit Greensmaster Flex 21 Mower Model No. 117-1457 Parts Catalog Ordering Replacement Parts To order replacement parts, please supply the part number, the quantity,
More informationSERVICE PARTS LIST BULLETIN NO M18 FUEL 1-1/2" Magnetic Drill CATALOG NO. G56A
65(7x) 48 64 CATALOG NO. SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M18 FUEL 1-1/2" Magnetic Drill 67 76 2787-20 77 83(3x) STARTING SERIAL NUMBER 79 G56A Torque Chart on
More informationSPARE PARTS LIST WALL SAW WSE1621
SPARE PARTS LIST WALL SAW Index 000 EN Spare Parts List 10999154 de / 01.11.2018 How to use the spare parts list The spare parts list is not intended as instructions for assembly or dismantling work. It
More informationVALVE ASSEMBLY. Form No "A" "A" Parts List for: (1/4 N.P.T.F.-REF.) (1/4 N.P.T.F.-REF.)
Parts List for: Form No. 108100 SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800)
More informationParts List. Item # Part # # Reqd. Description
5.2017.6.f 1 3800 Series Injector 1 2 3 4 5 6 7 21 8 9 20 10 11 12 19 18 17 16 15 14 13 Parts List Item # Part # # Reqd. Description 1 A-0664 1 5 Gallon 430 Reservoir 2 A-0575 1 Thumb Screw 3 A-0172 1
More informationClydesdale Model 8491
lydesdale Model 8491 Non-atalytic, Wood Burning Fireplace Insert Illustrated Parts List LYDESDALE I Model 8491 FIREBOX AND SHROUD ASSEMBLY A SEONDARY MANIFOLD ASSEMBLY B DOOR ASSEMBLY ASSEMBLY E ASHLIP
More informationPA 40 SERIES AIR POWER PUMPS
PA 40 SERIES AIR POWER PUMPS Parts Identification Manual For Air Powered Hydraulic Pumps PAD, PAM, and PAS Models Revison B 04/2008 2525 Gardner Road * Broadview, Il. 60155 * (800)323-9114 * www.tksimplex.com
More informationMODEL SUPER P Parts List
MODEL Parts List UNIT SERIAL NUMBER MANUAL NUMBER: EFFECTIVE 05/2016 1330 76TH AVE SW CEDAR RAPIDS, IA 52404-7052 PHONE (319) 363-8281 FAX (319) 286-3350 www.highwayequipment.com Copyright 2007 Highway
More informationForm No Rev D. ProCore 1298 Aerator Model No Serial No and Up
Form No. 3358-616 Rev D ProCore 1298 Aerator Model No. 09716 Serial No. 280000001 and Up Register at www.toro.com. Original Instructions (EN) Ordering Replacement Parts To order replacement parts, please
More informationDRIVE TRAIN 300E-450 HP 19
DRIVE TRAIN 00E-0 HP SOLID STEEL CASING THIS SIDE 0 REV 0 X MOTOR A BOLT B BOLT GASKET, MOTOR TO GEAR CASE GASKET, MOTOR TO GEAR CASE TAPER PIN, GEAR CASE TO MOTOR 0 SLEEVE, SHAFT SEAL, SHAFT 0 O-RING
More informationSECTION 4 -ENGINE & ATTACHING PARTS
SECTION 4 -ENGINE & ATTACHING PARTS ENGINE & ATTACHING PARTS Power Unit Assembly 49 46 9 40 44 50 61 11 14 5 51 60 20 27 45 41 21 0 7 7 12 16 4 20 27 45 52 58 VIEW SHOWING TUBE ASSEMBLY AT MAIN PUMP FOR
More informationPARTS GUIDE Rev
HIGH CAPACITY OUTPUT STACKER (AS-1180C M8 STK) for the MACH 8 PARTS GUIDE Rev 09-17-14 This manual is intended solely for the use and information of Neopost USA, its designated agents, customers, and their
More informationPARTS LIST FOR LN-25 LN-25
P-374 P-374 PARTS LIST FOR 200 250 300 350 400 450 500 550 600 650 700 100 150 50 IN IN/MIN WIRE FEED MORE T13086-99 1. 5. 4. 3. 2. IN/MIN. USED. cross. 35 31 23 25 27 29 15 17 19 21 P-374-A P-374-A ILLUSTRATION
More informationQGD-20/25/30 & QGD-40/50
QGD-0/5/0 & QGD-40/50 Direct Drive Rotary Screw Air Compressor Parts Manual This manual contains important safety information and should be made available to all personnel who operate and/or maintain this
More informationTL960 PARTS MANUAL. Fuel Section. Page 9-1. Fuel 09/97
Fuel Section Fuel Page 9-1 Fuel Tank Between The Rails Page 9-2 Fuel Fuel Tank Between The Rail Item Part Num. Number Qty. Description Notes 1 61360662 1 Elbow, 90 o, 1/2" NPT x 5/8" T 2 61270100 1 Sender
More informationP99 Pressure Reducing Regulator
P99 Pressure Reducing Regulator Applications City / District gate operation Commercial buildings Boilers, furnace, oven Plant air service Features 5 Pilot choices for low to extra high pressure Up to 1,000
More information225 CARTRIDGE DUAL SEAL
225 CARTRIDGE DUAL SEAL MECHANICAL SEAL INSTALLATION INSTRUCTIONS PREPARATION 1 2 500.010" 0,25 mm 3 4.32 µ" 0,8 µm R a 1000 + ±.001".002" 0,025mm 0,050mm CAUTIONS These instructions are general in nature.
More informationEDWARDS GEAR PUMPS REPAIR PARTS INDEX
SECION EDWARDS PAGE EDWARDS GEAR PUMPS REPAIR S INDEX READ AND UNDERSAND HE PUMP AND MOOR INSRUCIONS BEFORE AEMPING O INSALL, DISASSEMBLE OR REPAIR HE PUMP SECION EDWARDS PAGE 2 EDWARDS GEAR PUMPS MODELS,
More informationLUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading.
hand grease guns Lever type The tough high pressure cast iron head makes Pro-Master Grease Guns unique in comparison to common pot metal or other die cast heads with a head burst pressure of 17,000 PSI
More informationSECTION 9: PARTS. Headstock
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to
More informationNylon Fluid Regulators
Instruction Sheet P/N 08880B Introduction The FR- and RA- nylon fluid regulators are patented, electrically non-conductive, air-operated, pressure regulators. Except for the body shape and fluid connection
More information66cm Heavy-Duty Rear Bagger Lawn Mower
Form Number 3360-820 Rev B 66cm Heavy-Duty Rear Bagger Lawn Mower Model No. 22200TE - 280000001 and up. Parts Catalog Ordering Replacement Parts To order replacement parts, please supply the part number,
More informationROTARY, STRAIGHT, PIPE & TUBE CLEANING TOOLS & NOZZLES
Nozzles ROTARY, STRAIGHT, PIPE & TUBE CLEANING TOOLS & Jetstream provides tools for different 15,000 psi applications in surface preparation, pipe cleaning and tube cleaning. All of our tools are made
More informationMagnesium Option, Late Model Front Seal, Viton, P/N 67256V Rear Seal, Viton, P/N 67257V Shifter Installed Heat Treated Yoke, P/N
DESCRIPTION OPTION Magnesium Option, Late Model 80100L Front Seal, Viton, P/N 67256V 80109 Rear Seal, Viton, P/N 67257V 80110L Shifter Installed 80112L Heat Treated Yoke, P/N 62946-6 80119-6 Heat Treated
More informationAF0465-XX SERVICE KITS GENERAL DESCRIPTION MODEL DESCRIPTION CHART OPERATING AND SAFETY PRECAUTIONS THIS MANUAL COVERS THE FOLLOWING MODELS
OPERATOR S MANUAL INCLUDING: SERVICE KITS, TROUBLESHOOTING, PARTS LIST, DISASSEMBLY & REASSEMBLY. 4-1/4 AIR MOTORS AF044X-XX (4 STROKE) and AF046X-XX (6 STROKE) Also covers 637489 service kits AF044X-XX
More informationG 3000 OH ( ) 650 Spare parts list G 3050 ( ) 10 Frame 20 Pump set. 23 Cylinder head
Table of contents G 000 OH (.07-2.0) 650 Spare parts list G 050 (9.9-20.0) 0 Frame 20 Pump set 2 Cylinder head 4 Valve ( Stück) (2.4-96.0) 4 Nozzle insert only for replacement (4.769-04.0) 22 Piston 2
More informationMODEL 456 SERIES HYDRA-LIFT ROTATOR
OPERATOR S MANUAL FOR 456 SERIES HYDRA-LIFT DRUM ROTATOR A. IMPORTANT: 1. Review the Material Safety Data Sheet(s) for the material(s) in the drum(s) and take all necessary precautions. Safety shoes, work
More informationIntroduction Maximum Inlet Pressures. Installation and Start-Up. Servicing and Adjustment CAUTION CAUTION CAUTION. General Notes
IN-G-REG-13--0312-01-A* Model 441-S Regulator Installation and Maintenance Instructions Introduction Maximum Inlet Pressures Regulator Body Type Screwed End (2" Pipe Size Only) Flanged ANSI 125 FF Flanged
More informationCHAPTER 4 PARTS AND DIAGRAMS
CHAPTER 4 PARTS AND DIAGRAMS FRONT VIEW 2 1 3 6 5 4 ITEM DESCRIPTION PART NUMBER ITEM DESCRIPTION PART NUMBER 1 Gauge, Vacuum Asmb. MV2008010 5 Drawer, Plastic MV0105002 1a Lens, Vacuum Gauge MV0501910
More information1 CHASSIS, AEP, ASSY, E1000-C, E2000-C, E3000-C 1 JP TANK, SOLUTION, STEEL, PAINTED, 6GAL, ASSY 1 JP7725-A 3 PANEL, COVER, REAR, STEEL,
1 CHASSIS, AEP, ASSY, E1000-C, E2000-C, E3000-C 1 JP7712 2 TANK, SOLUTION, STEEL, PAINTED, 6GAL, ASSY 1 JP7725-A 3 PANEL, COVER, REAR, STEEL, PAINTED, AEP 1 JP7729 4 WHEEL, PNEUMATIC, 10"ODX3/4"ID, BALL
More informationTugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
More information824 Snowthrower. Parts Catalog. Form Number Rev A. Model No and up. Model No and up.
Form Number 3322-802 Rev A 824 Snowthrower Model No. 38053-200000001 and up. Model No. 38078-200000001 and up. Parts Catalog Ordering Replacement Parts To order replacement parts, please supply the part
More informationGS12 Grape Spreader. Illustrated Parts Breakdown
GS Grape Spreader Illustrated Parts Breakdown Page Front End Assembly Page Axle Assembly Page Floor & Apron Page Pump Assembly Page Page Hydraulics Manifold Components Page Gearbox Components S/N - Page
More informationCore Aerators CA2548, CA2560, CA P Parts Manual. Copyright 2018 Printed 07/10/18
Core Aerators CA2548, CA2560, CA2572 18984 325-020P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception.
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS HALF SIZE GAS CONVECTION OVENS ML-114573 ML-114575 HGC20 HGC20D A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 33717 Rev. A (April 2013) F-33717 Rev. A
More information8650-AR SNOWBLAST PART'S MANUAL. Snow Blower TEAMCO INC
SNOWBLAST 8650-AR Snow Blower 05-08 PART'S MANUAL TEAMCO INC. 27050 S. Katie Rd. Suite 400 Tea, SD 57064 605-498-0610 www.teamco-inc.com Email: chrism@teamco-inc.com TO THE OWNER/OPERATOR/DEALER All implements
More information21Inch Heavy-Duty Recycler Rear Bagger Lawn Mower
Form Number 3357-387 Rev B 21Inch Heavy-Duty Recycler Rear Bagger Lawn Mower Model No. 22188-270000001 and up. Parts Catalog Ordering Replacement Parts To order replacement parts, please supply the part
More informationIllustrated Parts List for VMAC System V Ford F250-F350 Triton 5.4 L 3-valve (with 3 bolt crank pulley)
Illustrated Parts List for VMAC System V900092 2008 Ford F250-F350 Triton 5.4 L 3-valve (with 3 bolt crank pulley) System V900102 2010-2008 Ford F250-F350 Triton 5.4 L 3-valve (with center bolt crank pulley)
More information1 CHASSIS, CHANNEL, MAIN, ST, PAINTED, OIL FIRED 1 JD8000 2ASSY SEE FIG 1-10 BLOWER, AIR, ASSY, 6" OD X 4" W X 1/2" SHAFT 1 JB2000 3ASSY SEE FIG 1-2
1 CHASSIS, CHANNEL, MAIN, ST, PAINTED, OIL FIRED 1 JD8000 2ASSY SEE FIG 1-10 BLOWER, AIR, ASSY, 6" OD X 4" W X 1/2" SHAFT 1 JB2000 3ASSY SEE FIG 1-2 BURNER, GUN, OIL, DOUBLE, ELECTRODE 1 JB1000 4ASSY SEE
More informationModuflow. ILP and RFP Low Pressure Filters. Series
Moduflow ILP and RFP Low Pressure Filters Series 27 Applications for Moduflow Filters Power Unit Fabrication Off-line Filter Loops Mobile Equipment The Moduflow filter is widely considered the most versatile
More informationThis illustration is for reference purposes only. The appearance of your unit may differ from the unit shown.
2525 GARDNER ROAD, BROADVIEW, IL 60155 1.800.323.9114 Outside U.S. 1.708.865.1500 www.tksimplex.com G5 SERIES ELECTRIC POWER PUMP PARTS IDENTIFICATION MANUAL Reference # - 54247 Rev. - A Date - 10/08 This
More informationFilm-Tech. The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment.
Film-Tech The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment. These manuals are designed to facilitate the exchange of information related to cinema
More informationSERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. 120V Compact Magnetic Drill STARTING SERIAL NUMBER.
69(5x) SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS CATALOG NO. 120V Compact Magnetic Drill 4272-20 STARTING SERIAL NUMBER G84A BULLETIN NO. 54-46-0430 REVISED BULLETIN DATE
More informationIllustrated Parts List for VMAC System V900075
Illustrated Parts List for VMAC System V90007 Ford 7.3L F0 - F30SD 999-003. W/WOAC - Kit Pack List... - Fastener Pack, 380046...4 3 - Compressor Assembly, P007...6 4 - Compressor Sub Components, P000...8
More informationCast Iron Liquid Relief Valves
Cast Iron Liquid Relief Valves Features Bolted bonnet permits easy inspection and servicing without removal from system. Quality cast iron body and bonnet, insert and disc are available in either bronze
More informationGREEN GARDE MODEL JD9-C - HIGH PRESSURE SPRAY GUN
GREEN GARDE MODEL JD9-C - HIGH PRESSURE SPRAY GUN Guns Spray 38500 Model JD9-C - 38500 The JD9 heavy-duty spray gun can help make your operation more effective and profitable. Check these advantages. Adjustable
More informationMulching and Finishing Mowers MP and FP
Mulching and Finishing Mowers MP and FP Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 Transport Wheel, Tire & Spindle MP and FP ALPHABETICAL INDEX CONTENTS PAGE 00 Hydraulic Cylinder (Rear)
More informationAll Parts available from
Model: 7-100 7-121 EXTENDED Part List English Table of ontents hassis 3 7 hassis 5 Electric parts 7 7 Electric parts 10 Float chamber 13 Overflow valve 15 Motor pump unit (a) 17 Motor pump unit (b) 20
More informationSpike Tooth Harrow STH P Parts Manual. Copyright 2017 Printed 06/30/17
Spike Tooth Harrow STH2024 30897 322-315P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your
More informationSeries. This illustration is for reference purposes only. The appearance of your unit may differ from the unit shown.
2525 GARDNER ROAD, BROADVIEW, IL 60155 1.800.323.9114 Outside U.S. 1.708.865.1500 www.tksimplex.com G4 SERIES ELECTRIC POWER PUMP PARTS IDENTIFICATION MANUAL Reference # - Rev. - A Date - 05/10 This illustration
More informationForm No. P Meter, PD Model SD, ASD, SF, or ASF-4, 4R, 4V, or 4RV-NF Parts List
Form No. P0541.03 Meter, PD Model SD, ASD, SF, or ASF-4, 4R, 4V, or 4RV-NF Parts List Issue/Rev. 0.3 (3/01) Bulletin P0541.03 SD and ASD Models The Most Trusted Name In Measurement SD or ASD SF or ASF
More informationPrd List Part No. Description Cat Price
13023 KIT OIL RESERVOIR SERIES II J 55.00 13027 KIT FLUSHING (FITS H75-HXL20W) O 88.00 13989 OIL FLUSHING 1 GALLON O 26.50 13990 OIL FLUSHING CASE 4 GALLONS O 99.50 13996 OIL 20 WT 1 GAL. MASPORT O 28.50
More informationSpare parts list Pentruder Modular Drilling System
Spare parts list Pentruder Modular Drilling System Pentruder Modular Drilling System, Column CN-0.5; 1.2; 1.5 F/M Page CN-F/M Pentruder Modular Drilling System, Column CN-0.5; 1.2; 1.5 F/M Page CN-F/M
More informationSpare parts list ( ) HD 2.3/26 CV
Spare parts list (1.107-077.0) HD 2.3/26 CV 08.12.2015 www.kaercher.com EN Table of contents Order instructions HD 2.3/26 CV (1.107-077.0) 200 Spare parts list G 2600 PH 10 Frame 20 Pump set 21 Cylinder
More informationF PRO. 12 Volt Electric Sprayer. Part #AS76 Copyright 2014 by Hydro-Force Rev. 1/14
F PRO SPRAYER by 12 Volt Electric Sprayer Part #AS76 Copyright 2014 by Hydro-Force Rev. 1/14 Table of Contents Feature and Benefits... 3 Specifications... 3 Complete Sprayer Diagram... 4 Complete Sprayer
More informationFeatures. HTHP Filter Press for Drilling Fluid Testing DRILLING FLUIDS EQUIPMENT
HTHP Filter Press for Drilling Fluid Testing DRILLING FLUIDS EQUIPMENT For over 30 years OFI Testing Equipment (OFITE) has provided instruments and reagents for testing drilling fluids, well cements, completion
More informationContents How To Use The Illustrated Parts List... 3 CASE... 4 COUNTERSHAFT ASSY... 7 INPUT SHAFT... 8 KITS & ASSEMBLIES... 9 LEVER ASSY...
FSO-8406A July 2011 Contents How To Use The Illustrated Parts List... 3 CASE... 4 COUNTERSHAFT ASSY... 7 INPUT SHAFT... 8 KITS & ASSEMBLIES... 9 LEVER ASSY... 10 MAINSHAFT ASSY... 12 MISCELLANEOUS... 14
More informationAY-SS Trigger Adapter AA46
98 98 Choice of Materials Spray and Capacities Guns For spot spraying, tree spraying, livestock spraying and power washing at GunJet pressures Number from AA2Spray 30 to 800 Guns PSI. To Length operate
More information6200 Series. Specifications. Fluid End Power End Models 6211, 6212, 6221, & 6222 Models 6241 & 6242 Part Material Part Material Part Material
5.2018.12.i 6200 Series Specifications The Flomore 6200 Series Pump line consists of a series of basic pump options all developed from a modular power unit. All units are pneumatically driven positive
More informationProline 13HP Mid Size Traction Unit
Form No. 3323 888 Proline 13HP Mid Size Traction Unit Model No. 30159 200000001 & Up Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number, the quantity, and
More informationASTRO AMC-2000 SERIES ENVELOPE FEEDER
ASTRO AMC-2000 SERIES ENVELOPE FEEDER PARTS CATALOG GROUP 1 Page 1 GROUP 1 1. 84-100-56B FRONT FRAME CLOSURE 1 25. 84-130-20 SKID WHEEL ASSEMBLY 1 2. 71-140-08 FRONT ENV. GUIDE ASSEMBLY, R/H 1 26. 123-0407
More informationSpare parts manual. HPO Reciprocating compressor unit
Spare parts manual en HPO 24-26-28 Reciprocating compressor unit Manual for HPO 24-26-28 Compressor type 24 26 28 Compressor no. Refrigerant R717 R410A R744 Other Control Unisab III None Other Water-cooled
More information21in Heavy-Duty Recycler
Form Number 3359-639 Rev A 21in Heavy-Duty Recycler /Rear Bagger Lawn Mower Model No. 22187-280000001 and up. Parts Catalog Ordering Replacement Parts To order replacement parts, please supply the part
More informationAP50 MANUAL AND PARTS LIST VERSA-MATIC PUMP. Service / Maintenance Log SUBMERSIBLE CENTRIFUGAL PUMP. Contact Information. Date Details Completed
Service / Maintenance Log Date Details Completed MANUAL AND PARTS LIST AP50 SUBMERSIBLE CENTRIFUGAL PUMP Contact Contact Information Phone / Fax No. DISTRIBUTOR VERSA-MATIC PUMP A Unit of IDEX Corporation
More informationModel-1 Natural Gas Valves
Flanged End 285 Screwed Weld End Locking Devices KEROTEST Model-1 s Short Weld End Long Weld End Weld x Flange 500 / 740 Flanged End 500 / 740 Weld x Flange 285 Model-1 Short Weld End Standard Welding
More informationHANDGUNS ADJUSTABLE TIPS ACCESSORIES FOR HANDGUNS COUPLERS FIRE HOSE NOZZLE HANDGUNS , 6-12, 6-14 HANDGUN ACCESSORIES
I N D E X ADJUSTABLE TIPS... 6-6 ACCESSORIES FOR... 6- COUPLERS... 6- FIRE HOSE NOZZLE... 6-... 6-, 6-2, 6-4 HANDGUN ACCESSORIES... 6- (COMPLETE WITH LANCES) Hamilton... 6-4 Hypro Lurmark... 6- Lurmark...
More informationSECTION 12: ILLUSTRATED PARTS LIST
SECTION : ILLUSTRTED S LIST (for choke) (for throttle) 0 0-0 Screw, #- x.0 0-0 Screw, /- x.0 0-0 Screw, /- x.0 0- Screw, #0- x. 0- Socket Cap Screw, /- x. 0- Self-tapping Screw, /- x. -00 Flange Lock Nut,
More informationNotes: Figure 20- (common Parts) Electrical Dia. Files Jw 103
Notes: Figure 20- (common Parts) Electrical Dia. Files Jw 103 1 CHASSIS, CHANNEL, MAIN, ST, PAINTED, OIL FIRED 1 JD8000 2ASSY SEE FIG 1-10 BLOWER, AIR, ASSY, 6" OD X 4" W X 1/2" SHAFT 1 JB2000 3ASSY SEE
More informationLB601B PARTS LIST COMPRESSORS CB-5E /06. Bulletins Needed For Complete Parts List. Gasket Set, Repair Kits and Special Tools
COMPRESSORS CB-5E-051 2011/06 LB601B PARTS LIST Serial # ID# Gasket Set, Repair Kits and Special Tools Gasket Set Buna-N & Aluminum 794099 Top End Repair Kit 794237 Includes Piston Rings & Expanders, Packing
More informationLPM LP-Gas Flowmeter Product Bulletin L LISTED. Primary Features. Specifications 91U3
LP-Gas Flowmeter Product Bulletin U L LISTED 9U Designed for bobtail tank trucks and bulk plants, the LPM-00 offers the widest flow range, (0-00 gpm) available in a meter of this type. The LPM-00 utilizes
More informationTC-200 TRANSFER CASE PARTS MANUAL
AUTOMOTIVE CORPORATION TC-200 TRANSFER CASE PARTS MANUAL Part Number 873-0042-001 Fabco Automotive Corporation, Livermore, CA Ph: (925) 454-9500 Fax: (925) 454-9501 1-(800) 967-8838 www.fabcoautomotive.com
More informationPARTS LIST MAVERICK 300 STANDARD SPEED FLOOR MACHINE
PARTS LIST MAVERICK 300 STANDARD SPEED FLOOR MACHINE WIRE DIAGRAM - VARIABLE SPEED 120 VOLT SEE HANDLE ASSEMBLY FOR COMPONENT NUMBERS 240 VOLT SEE HANDLE ASSEMBLY FOR COMPONENT NUMBERS WIRE DIAGRAM - SINGLE
More information