Auto-Adjust II Turbo-Meters
|
|
- Dayna Stanley
- 6 years ago
- Views:
Transcription
1 Sensus Metering Systems Auto-Adjust II Turbo-Meters " AAT-0 and " AAT-30 MP-03D R Parts List T H E G A S I N D U S T R Y
2 Pressue Tap All Working Pressures Body Assembly Components Main Body Assembly, 0#W.P. with Badges Less Nose Cone Main Body Assembly, Cast Steel, 0# W.P., ANSI 300 with Badges Less Nose Cone Main Body Assembly, Cast Steel, 0# W.P., ANSI 600 with Badges Less Nose Cone Main Body Assembly, Cast Steel, 0# W.P., ANSI 600 with Badges Less Nose Cone, with Ring Joint Flanges Nose Cone with Straightening Vanes, All Pressures #8-3 x /" Long Set Screw 903 Manufacturer Nameplate, 0# W.P. (not shown), AAT Manufacturer Nameplate, 0# W.P. (not shown), AAT Manufacturer Nameplate, 0# W.P. (not shown), AAT Manufacturer Nameplate, 0# W.P. (not shown), AAT Manufacturer Nameplate, 0# W.P. (not shown), AAT Manufacturer Nameplate, 0# W.P. (not shown), AAT Manufacturer Nameplate Screws (not shown) # x 3/6" Long Round Head Drive Screw *6 Top Plate to Body "O" Ring, All Pressures, Buna 9509 *6A Top Plate to Body "O" Ring, All Pressures, -0 F, Viton (optional) Steel Pipe Plug, /" Inlet Badge (on inlet flange of body) # x /8" Round Head Brass Drive Screw Pulse Factor Badge (on top plate) Ft A Pulse Factor Badge (on top plate) M #8-3 x /" Long Round Head Screw Internal Mechanism Badge (not shown), AAT Internal Mechanism Badge (not shown), AAT Steel Elbow C.S.A. Approval Nameplate (not shown) AAT C.S.A. Approval Nameplate (not shown) AAT C.S.A. Approval Nameplate Drive Screw (not shown) *Recommended Spare Parts General Assembly AAT-0 and AAT-30 Auto Adjust II Turbo-Meter
3 5 3 6 Index Plate Assembly Section B A Index Shaft and Gland Assembly Index Plate Assembly Components C Index Shaft and Gland Assembly (Includes Nos. A-C) A Gland B Index Shaft Assembly C Bottom Dog Gasket, Index Plate to Top Plate Index Plate Wiring Label Cap Screw, Index Plate to Top Plate, 5/6" - 8 x 3/" Hex Head Seal Screw, Index Plate to Top Plate, 5/6" - 8 x 3/" Hex Head *Recommended Spare Parts 3
4 0 5 3A 3 6 8A 8C 8B 8B 8D 8 3 Top Plate Assembly Components Top Plate Assembly, 0# W.P. Ductile iron Top Plate Assembly, 0# W.P., Cast Steel Top Plate Assembly, 0# W.P., Cast Steel Intermediate Gear Assembly, 000 CF/Rev., Plastic, Less Change Gears, AAT Intermediate Gear Assembly, 0 M 3 /Rev., Plastic, Less Change Gears, AAT Intermediate Gear Assembly, 000 CF/Rev., Plastic, Less Change Gears, AAT Intermediate Gear Assembly, 0 M 3 /Rev., Plastic, Less Change Gears, AAT Large Change Gear (note: "XX" refers to gear blank (diameter) size, "YY" refers to number of gear teeth. Digits must be substituted for XX-YY "XX" and "YY" when ordering) 3 Small Change Gear (see note for No. above) XX-YY 3A Small Change Gear Nut, #-0 Hex Stainless Steel Intermediate Gear Output Dog (top) Intermediate Gear Input Dog (bottom) Intermediate Gear Retaining Screw, #8-3 x 3/8" Long Fillister Head Lockwasher 9503 *8 Follower Magnet Assembly (Includes Nos. 8 A - C) A Retaining Ring 9069 * 8B Bearing C Spacer D Follower Magnet Holder With Magnet Magnet Well and Post Assembly, 0# W.P. (includes illustration no. 0) *9 Magnet Well and Post Assembly, 0# & 0# W.P. (Includes No. 0) *0 * Magnet Well "O" Ring Buna Magnet Well "O" Ring, Viton 9086 Magnet Well Tetraseal, Buna 90 Tetraseal, (optional) Viton Cap Screw, Top Plate to Body, 0# W.P., 5/8" - x " Long Hex Head Stainless Steel Cap Screw, Top Plate to Body, 0# & 0# W.P., " - 8 x -3/" Long Hex Head Steel Seal Screw, Top Plate to Body, 0# W.P., 5/8" - x " Long Hex Head Stainless Steel Seal Screw, Top Plate to Body, 0# & 0# W.P., " - 8 x -3/" Long Hex Head Steel Vent Cap Extractor Bracket Extractor Bracket Retaining Screw, #8-3 x 3/8" Long Fillister Head 9033 Adapter Plate Screws Tubing for Oil System - Unformed 59 9 Extractor Bracket Clip *Recommended Spare Parts
5 5 Coupling Shaft Assembly 8A 6 3 Top View A B C B 8 0 D * Driver Magnet Holder and Bearing Assembly (includes illustration nos. A-D) A Bearing Retaining Ring 9069 *B Bearing 9056 C Spacer D Magnet, Holder & Pin Assembly Adapter Plate Quick Connect Internal Housing Assembly, Calibrated With Change Gears, Cubic Foot, AAT Internal Housing Assembly, Calibrated With Change Gears, Metric, AAT Internal Housing Assembly, Calibrated With Change Gears, Cubic Foot, AAT Internal Housing Assembly, Calibrated With Change Gears, Metric, AAT Coupling Shaft Assembly, 0# W.P Coupling Shaft Assembly, 0# and 0# W.P Oil Tubing, Top Plate to Internal Housing Tee Oil Tubing, Tee to Metering Rotor Module A Oil Tubing, Tee to Sensor Rotor Module Retaining Ring 98 Main (metering) Rotor Assembly, AAT-0, Buna **0 ** Driver Magnet Holder and Bearing Assembly Internal Housing Assembly Components Sectional View (Internal Housing Assembly) Main (metering) Rotor Assembly, AAT-0, Viton Main (metering) Rotor Assembly, AAT-30, Buna Main (metering) Rotor Assembly, AAT-30, Viton Sensing Rotor Assembly, AAT-0, Buna Sensing Rotor Assembly, AAT-0, Viton Sensing Rotor Assembly, AAT-30, Buna Sensing Rotor Assembly, AAT-30, Viton ** Center Plate, AAT Center Plate, AAT Module Connecting Screw, #0- x 3/" Long Screw Note: Maximum Torque = 0 Inch/Lb Serial Badge Serial Badge Retaining Screw, #-0 x /" Long Pan Head Screw Shoulder Screw Compression Ring (Pressure Line) " Pressure Tap Tubing "O" Ring, Buna-N "O" Ring, Viton (Optional) Disc Spring Compression Ring (Oil) Wire Clip Extractor Bracket Retrofit Kit (not shown) Oil Tube Replacement Assembly (not shown) (includes 6,, 8, 8A & ) *Recommended Spare Parts ** numbers 0, and affect calibration.these components must be ordered in combination and cannot be supplied as seperate items. 5
6 Inlet View 6 A 6 5 H B Bearing Bracket Partial Section View F Section View G C D A Bearing Bracket Partial Top View 3 F 3 0 I 6 E
7 Main (Metering) Rotor Assembly Components Main Rotor Assembly, AAT-0, Buna ** Main Rotor Assembly, AAT-0, Viton Main Rotor Assembly, AAT-30, Buna Main Rotor Assembly, AAT-30, Viton ** Carrier Assembly (Includes Nos. A-E) A Dowel Pin 950 B Oil Tubing C Filter Screen D Screen Retainer 909 ** E Bearing Bracket Carrier F 6 #6-3 /" Long Pan Head Screw G Module Seal Positioner H Pressure Tap Tube, 3/6" I 6 Vane Insert Bearing Bracket **3 Rotor and Insert Assembly, AAT Rotor and Insert Assembly,AAT Main Rotor Shaft Locking Key (rotor to shaft) Spherical Washer 9083 Locknut *8 Downstream Rotor Shaft Bearing Chopper Disc Assembly Retaining Screw, Chopper Disc to Shaft, #-0 x /8" Long Set Screw * Upstream Rotor Shaft Bearing Downstream Bearing Retainer Plate Retainer Plate Screw, #8-3 x /6" Long Round Head Screw Retainer Plate Screw Lockwasher Worm A Retaining Screw, Worm to Shaft, #6-3 x /8" Long Set Screw Wormwheel Shaft Wormwheel (5T) Wormwheel Hub Wormwheel Hub Set Screw #6-3 x /8" Long Set Screw *0 Wormwheel Shaft Bearing Bearing Retainer Plate Retainer Plate Screw #-0 x /" Long Pan Head Screw Lockwasher T Idler Gear Idler Gear Set Screw #6-3 x /8" Long Set Screw T Drive Gear Drive Gear Post T Drive Gear Retainer Drive Gear Retainer Screw, #-0 x /" Long Pan Head Screw Retainer Screw Lockwasher Oil Resevoir Cover Resevoir Cover Screw #-0 x /" Long Pan Head Screw Cover Screw Lockwasher Oil Wick Slot Sensor Holder Slot Sensor Switch #0-80 x 5/6" Long Flat Head Screw #5-0 x /" Long Round Head Screw Lockwasher Bearing Bracket Filter Screen Filter Screen Retainer 909 * Bracket to Carrier Tetraseal, Buna Bracket to Carrier Tetraseal, Viton Bracket Retaining Screw #8-3 x /" Long Fillister Head Screw Bracket Retaining Screw External Lockwasher Wire Clamp Oil Resevoir Gasket Seal, Oil Passage, Buna Seal, Oil Passage, Viton *Recommended Spare Parts **These items affect calibration.these components must be ordered in combination and cannot be supplied as seperate items.
8 Sensing Rotor Assembly Components A Downstream End View A 35 Partial Bearing Bracket Section View Partial Bearing Bracket Top View B C Side View Section
9 Sensing Rotor Assembly Components Sensing Rotor Assembly, AAT-0, Buna ** Sensing Rotor Assembly, AAT-0, Viton Sensing Rotor Assembly, AAT-30, Buna Sensing Rotor Assembly, AAT-30, Viton ** Carrier Assembly (Includes No. A) A Oil Tubing Housing Plate Assembly, (Includes Nos. A-C) A Housing Plate B Filter Screen C Screen Retainer 909 *3 Tetraseal, Buna Tetraseal, Viton Bearing Bracket Rotor Shaft Locknut Spherical Washer 9083 **8 Rotor and Insert Assembly, AAT Rotor and Insert Assembly, AAT Rotor Locking Key Upstream Bearing Retainer Plate #-0 x 3/8" Long Fillister Head Screw # Lockwasher *3 Upstream Rotor Shaft Bearing Chopper Disc Assembly (8 blades) #-0 x /8" Long Set Screw *6 Downstream Rotor Shaft Bearing Oil Resevoir Cover Assembly #-0 x /" Long Pan Head Screw Lockwasher Oil Wick 930 Tubing Slot Sensor Holder Holder Retaining Screw #5-0 x /" Long Round Head Screw Lockwasher Slot Sensor Switch Switch Retainer Screw # 0-80 x 5/6" Long Screw Carrier to Bracket Screw #8-3 x /" Long Round Head Screw Lockwasher 9503 *9 Tetraseal, Buna Tetraseal, Vitron Bracket Retaining #8-3 x 3/8" Long Flat Head Screw Filter Screen Screen Retainer Oil Resevoir Gasket Square Rope (Held in w/bostik Adhesive 585 P/N 9050) Compression Ring Wire Clamp 9500 Oil ounce Bottle Oil, Gallon Can Lubrication Hand Gun Blank Top Plate, 0# W.P Blank Top Plate, 0# & 0# W.P *Recommended Spare Parts **These items affect calibration.these components must be ordered in combination and cannot be supplied as seperate items. 9
10 External Lubrication Systems Fittings Lubrication Fitting Hex Bushing Valve /" Pipe Nipple Electrical Systems Fittings 3 Terminal Block #8-3 x 3/8" Long Screw A/R Loctite 9055 #8-3 x 3/8" Long Screw 9033 A Washer "O" Ring, Buna A "O" Ring, Viton Feed-Thru Assembly, Buna A Feed-Thru Assembly, Viton A/R Solder A/R Shrink Tube Lockwasher A 8 5 5A 6 6A Conduit Type 6 3 Bendix Type 5 External Wiring Fittings Gasket 9053 #8-3 x /" Long Round Head Screw Cap and Chain Assembly for Bendix Connector Bendix Connector, Female End (not shown) Bendix Connector, with Wiring to Terminal Block Conduit Adapter Assembly with Wiring to Terminal Block Lockwasher
11 Wiring System Components Male Bendix Assembly Brown White Black Terminal Block Sensing Rotor Switch (Brown/White) Green Red Feed Thru Assembly (Buna) Main Rotor Switch 9503 (Red/Black) B A E C D Bendix Connector Male End Male Bendix Cable Assembly or Conduit Adapter Assembly (not shown) Terminal Block Wiring Detail for Bendix or Conduit Connectors Ouput Wiring to Auto-Adjust Electronics Connector: Pin: D Brown Sensing, Neg. Input Wiring from Meter Brown C White Sensing, Pos. White Sensing Rotor B Black Main, Neg. Black Main Rotor A Red Main, Pos. Red E Green Ground
12 805 Liberty Boulevard DuBois, PA Fax: (8) (North American Gas) Representatives in all principal cities. Distributors throughout the world. Authorized Distributor: Limited Warranty Seller warrants the Goods to be free from defects in materials manufactured by Seller and in Seller s workmanship for a period of (one() year) after tender delivery (the Warranty Period ). THIS LIMITED WARRANTY (A) IS IN LIEU OF, AND SELLER DISCLAIMS AND EXCLUDES, ALL OTHER WARRANTIES, STATUTORY, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR OF CONFORMITY TO MODELS OR SAMPLES; (B) does not apply to any Goods which have been (I) repaired, altered or improperly installed; (II) subjected to improper use or storage; (III) used or incorporated with other materials or equipment, after Buyer or anyone usingthe Goods has, or reasonably should have, knowledge of any defect or nonconformance of the Goods; or (IV) manufactured, fabricated or assembled by anyone other than the SEller; (C) shall not be effective unless Buyer notifies Seller in writing of any purported defect or nonconformance within (thirty (30) days) after Buyer discovers or should have reasonably discovered such purported defect or nonconformance; and (D) shall only extend to Buyer and not to any subsequent buyers or users of the Goods. Buyer shall provide Seller access to the Goods as to which Buyer claims a purported defect or nonconformance; upon request by Seller, Buyer shall, at its own risk and expense, promptly return the Goods in question to Seller s Plant. Sensus Metering Systems 00 Made in USA Beckon 09/0 M
Parts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters
MP-1073C Rev. 3 Parts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters Parts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters Working Pressures: 175, 275, 720 & 1440 psig Copyright 2001 Invensys
More informationParts List 12 MODEL T-140 and T-230 Mark II Turbo-Meters with Blade Tip Sensors
MP-1070DS Metering Systems Parts List 12 Model T-140 and T-230 Mark II Turbo-Meter with Blade Tip Sensors Parts List 12 MODEL T-140 and T-230 Mark II Turbo-Meters with Blade Tip Sensors Working Pressures:
More informationParts List 6 MODEL T-35 and T-57 Mark II Turbo-Meters with Blade Tip Sensors
MP-1070BS Metering Systems Parts List 6 Model T-35 and T-57 Mark II Turbo-Meter with Blade Tip Sensors Parts List 6 MODEL T-35 and T-57 Mark II Turbo-Meters with Blade Tip Sensors Working Pressures: 175,
More informationRP-1350 Rev. 1. Parts List. Model 441-S Regulator. Parts List. Copyright 1999 Invensys Energy Metering
RP-1350 Rev. 1 Model 441-S Regulator Parts List Model 441-S Regulator Parts List Copyright 1999 Invensys Energy Metering DIAPHRAGM SIZE Nominal Inside Diameter A 7" Diaphragm 9 3 /4" 10" Diaphragm 13 1
More informationT-35/T-57 MARK II TURBO-METER GENERAL ASSEMBLY
MP-G-TBO-10-70B-0812-01-A 6" Model T-35/T-57 Mark II Turbo-Meter Parts List Working Pressures: 175, 275, 720, 1440 psi 12a 12 10 17 18 23 28 25 27 24 26 13 11 92 15 14 93 26a 29 32 76 44 43 8 9 83 84 79
More informationTurbo-Meters Mark-II and Auto-Adjust
Sensus Metering Systems MM-1070 R9 Turbo-Meters T H E G A S I N D U S T R Y Installation and Maintenance Instructions Sensus Metering Systems Turbo-Meters are designed for the measurement of gas. Proper
More informationDRIVE TRAIN 300E-450 HP 19
DRIVE TRAIN 00E-0 HP SOLID STEEL CASING THIS SIDE 0 REV 0 X MOTOR A BOLT B BOLT GASKET, MOTOR TO GEAR CASE GASKET, MOTOR TO GEAR CASE TAPER PIN, GEAR CASE TO MOTOR 0 SLEEVE, SHAFT SEAL, SHAFT 0 O-RING
More informationModel 441-S Regulator
Sensus Metering Systems RM-10 R7 T H E G A S I N D U S T R Y Installation and Maintenance Instructions Maximum Inlet Pressures Maximum Working Maximum Regulator 441 Body Pressure Inlet Body Type Materials
More informationIMPORTANT!!!! Read this manual before attempting any installation, wiring or operation.
Industrial Turbo Meters Sizes 2" through 6" Installation & Operation Manual IMPORTANT!!!! Read this manual before attempting any installation, wiring or operation. BadgerMeter,Inc. IOM-003-15 Part No.
More information900 SERIES SPLIT CASE FIRE PUMP REPAIR PARTS INDEX
900 SERIES SPLIT CASE FIRE PUMP REPAIR PARTS INDEX Read and understand the pump and motor instructions before attempting to install, disassemble or repair the pump. Part # AF-03-326 2015 Pentair Ltd. 01/30/15
More informationOperation and Parts Manual
Operation and Parts Manual 3-Point PTO and Hydraulic Stump Grinders Models: SC-25 and SC-25H SC-50 and SC-50H Safety Operation Maintenance Repair Troubleshooting Parts Parts SC-50 and SC-50-H Stumpbuster
More informationFIXED DEPTH INSERTION METER INSTRUCTIONS
UNPACKING Please open and inspect your package upon receipt. Your package was packed with great care and all the necessary packing materials to arrive to you undamaged. If you do find an item that is broken
More informationHeavy-Duty Single Rear Axles for Port/Terminal Tractors
Revised 10/2010 Heavy-Duty Single Rear Axles for Port/Terminal Tractors Parts Catalog PB-1037 Off Highway Axle Identification Meritor Off-Highway Brake Z = No brake B = Oil bath wet disk C = Air disk H
More informationParts Manual Vermeer/ McLaughlin V750 Vacuum Machine (Serial #7G G )
2006 Perimeter Road. Greenville, SC 29605 Toll Free: 800/435-9340 - Phone: 864/277-5870 Fax: 864/235-9661 - Website address: www.mightymole.com Email address: mmole@mightymole.com Parts Manual Vermeer/
More informationRPM Series Rotary Meter C-Class
PL 5800 TM RPM Series Rotary Meter C-Class Replacement s List Line Mounted Models 3.5M Non-TC Meter Shown AMERICAN METER 5 YEAR LIMITED WARRANTY RPM SERIES ROTARY METERS American Meter Co. Industrial Products
More informationEZ-IN Series Turbine Flowmeter
Class I, Group A, B, C, D, Division I Complies with ASME Standard B31.3 NUFLO EZ-IN Series Turbine Flowmeter Installation Manual Part No. 9A-100062997, Rev. 01 Measurement Systems EZ-IN Series BF Turbine
More informationIndustrial Turbo Meters, Sizes 2" through 6"
Industrial Turbo Meters Sizes 2" through 6" TUR-UM-00530-EN-19 (October 2014) User Manual Industrial Turbo Meters, Sizes 2" through 6" User Manual CONTENTS Scope of the Manual 5 Specifications 5 Product
More informationThis illustration is for reference purposes only. The appearance of your unit may differ from the unit shown.
2525 GARDNER ROAD, BROADVIEW, IL 60155 1.800.323.9114 Outside U.S. 1.708.865.1500 www.tksimplex.com G5 SERIES ELECTRIC POWER PUMP PARTS IDENTIFICATION MANUAL Reference # - 54247 Rev. - A Date - 10/08 This
More informationCENTURY OWNER'S MANUAL 15 SERIES ALUMINUM & STEEL CARRIERS INSTALLATION, OPERATION, MAINTENANCE & PARTS
CENTURY L E G E N D A R Y L E A D E R S H I P OWNER'S MANUAL 15 SERIES ALUMINUM & STEEL CARRIERS INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without
More informationSmith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7
Smith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7 Parts List Bulletin PO01018 Issue/Rev 0.1 (7/13) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 Page 2 SS01018 Issue/Rev.
More informationParts Manual V100G Vacuum Machine Part #E (SERIAL #1G G )
2006 Perimeter Road. Greenville, SC 29605 Toll Free: 800/435-9340 - Phone: 864/277-5870 Fax: 864/235-9661 - Website address: www.mightymole.com Email address: mmole@mightymole.com Parts Manual V100G Vacuum
More informationHousing 3 GT/GTS Gas Turbine Meter
PL4802.2 Housing 3 GT/GTS Gas Turbine Meter 12 6 5 4 11 9 2 8 7 3 1 2 3 GT/GTS Gas Turbine Meter Housing Item No. Description Qty. Common To All Variations Part Numbers Product Variations 275 PSIG 1440
More informationParts Manual V100G Vacuum Machine Part #E (SERIAL #1G G )
2006 Perimeter Road. Greenville, SC 29605 Toll Free: 800/435-9340 - Phone: 864/277-5870 Fax: 864/235-9661 - Website address: www.mightymole.com Email address: mmole@mightymole.com Parts Manual V100G Vacuum
More informationDISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG BUNN-O-MATIC CORPORATION
BUNN TWF-EZ DISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement
More informationThis illustration is for reference purposes only. The appearance of your unit may differ from the unit shown.
2525 GARDNER ROAD, BROADVIEW, IL 60155 1.800.323.9114 Outside U.S. 1.708.865.1500 www.tksimplex.com G3 SERIES ELECTRIC POWER PUMP PARTS IDENTIFICATION MANUAL Reference # - 54246 Rev. - A Date - 10/08 This
More informationSERIES 2100 Resilient Seated Butterfly Valves
SERIES 2100 Resilient Seated Butterfly Valves Publication S2100-101 Issue 06/16 Rev. C Design Characteristics Applications Commercial Heating & Air Conditioning Waste Water & Water Treatment Sea Water
More informationMulching and Finishing Mowers MP and FP
Mulching and Finishing Mowers MP and FP Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 Transport Wheel, Tire & Spindle MP and FP ALPHABETICAL INDEX CONTENTS PAGE 00 Hydraulic Cylinder (Rear)
More informationQGD-20/25/30 & QGD-40/50
QGD-0/5/0 & QGD-40/50 Direct Drive Rotary Screw Air Compressor Parts Manual This manual contains important safety information and should be made available to all personnel who operate and/or maintain this
More informationModels S Regulator
Moels 441-57S Regulator RM-1360 R9 Installation an Maintenance Instructions The is an excellent general purpose gas pressure regulator for larger loas. Use it for natural gas, air, ry CO2, propane, butane,
More informationWJ-Series. Turbine Meter Instructions ISO. 6 Meter. 3 Meter. Precision Flow Measurement. An ONICON Brand 9001:2008. if ie
WJ-Series Turbine Meter Instructions 6 Meter 3 Meter An ONICON Brand rt if ie d Comp a Ce ISO ny Precision Flow Measurement 9001:2008 TABLE OF CONTENTS General Information General Information...Page 3
More informationJOHN DEERE 9970 COTTON PICKERS
PARTS CATALOG FOR Mud Hog System II Rear Wheel Drive FOR JOHN DEERE 9970 COTTON PICKERS Mud Hog Model Numbers Tread Center OEM Aftermarket JD40005 JD47655 82, 90, 94, 106 TUTHILL Drive Systems 9098 West
More informationMODEL 5120 Tire Repair Station
MODEL 5120 Tire Repair Station 00-0049 Installation, Operation & Repair Parts Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 REV01182017 P/N: 81-0058G CAUTION
More informationDISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG
BUNN COMBO BREWER DISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement
More informationSmith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List
Issue/Rev. 0.0 (1/14) Smith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List Bulletin PO01023 *For meters which began shipping in 1993 to current. For meters shipped prior to
More informationAGCO Conversion Manual a HEADSIGHT.COM
AGCO 3300 Conversion Manual 09040404a HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com
More informationSECTION 8. PARTS INFORMATION
SECTION 8. PARTS INFORMATION 8-1. INTRODUCTION This section lists the replaceable parts of the Henny Penny Model LVG fryer. 8-2. GENUINE PARTS Use only genuine Henny Penny parts in your fryer. Using a
More informationPart Number: MODEL NUMBER: Rev. 7
609 & 6 POWER BACKHOES PARTS MANUAL SERIAL NUMBER: Manual Number: PM557 Part Number: 75457 MODEL NUMBER: Rev. 7 800-922-298 I www.paladinbrands.com P.O. Box 266, Delhi, IA 5222-0266, United States of America
More informationSECTION 4 -ENGINE & ATTACHING PARTS
SECTION 4 -ENGINE & ATTACHING PARTS ENGINE & ATTACHING PARTS Power Unit Assembly 49 46 9 40 44 50 61 11 14 5 51 60 20 27 45 41 21 0 7 7 12 16 4 20 27 45 52 58 VIEW SHOWING TUBE ASSEMBLY AT MAIN PUMP FOR
More informationDISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG BUNN-O-MATIC CORPORATION
8 4 0 0 1 BUNN Espress ES 2C DISCONTINUED VERSION Parts listed in this catalog may no longer be available. 12 0,5 1,5 CL 2 16 2,5 CAUTION HOT Liquid-Steam-Surfaces OFF ON ILLUSTRATED PARTS CATALOG Designs,
More informationLiquid Turbine Flowmeter
NUFLO Liquid Turbine Flowmeter User Manual 167018 Explosion-proof for use in Class I, Division I, Groups A, B, C, D Hazardous Environments ANSI 12.27.01-2003 Single Seal Part No. 9A-100062201, Rev. 01
More informationPARTS MANUAL SECTION 46
RTXG SERIES ROTARY TILLERS Published 08/16 MODELS RTX85G, RTX92G PARTS MANUAL SECTION 46 An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation
More informationSERIES 2200 Replaceable Seat Butterfly Valves
SERIES 2200 Replaceable Seat Butterfly Valves Publication S2200-101 Issue 04/18 Rev. A Design Characteristics Multiple Seat Options VSI offers various seat options including EPDM, NBR, Viton, and others
More informationMain Components Early Style
Pipe & Bolt Threading Machine Main Components Early Style * * 0 0 0 0 0 Service Notes: Ref. No.. Do not substitute bolt longer than / inches. Severe damage to Rear Bearing will result. Ref. No.. To assure
More informationLB601B PARTS LIST COMPRESSORS CB-5E /06. Bulletins Needed For Complete Parts List. Gasket Set, Repair Kits and Special Tools
COMPRESSORS CB-5E-051 2011/06 LB601B PARTS LIST Serial # ID# Gasket Set, Repair Kits and Special Tools Gasket Set Buna-N & Aluminum 794099 Top End Repair Kit 794237 Includes Piston Rings & Expanders, Packing
More informationInstruction Manual RZ POSITIVE DISPLACEMENT FLOWMETERS 2AU
Instruction Manual Anderson Instrument Co. Inc. 156 Auriesville Road Fultonville, NY 12072 1-800-833-0081 Fax 518-922-8997 www.anderson-negele.com Instrument Model Number Instrument Serial Number 2A 2AU
More informationOPERATING INSTRUCTIONS AND PARTS LIST BRIDGE DRIVE GEAR CASE
OPERATING INSTRUCTIONS AND PARTS LIST BRIDGE DRIVE GEAR CASE GENERAL Units are intended to be used within 30 days after receipt. If they are to be stored for a longer period of time, contact the factory
More informationTITAN FLOW CONTROL, INC.
PREFACE: TITAN FLOW This manual contains information concerning the installation, operation, and maintenance of Titan Flow Control (Titan FCI)Full Body Swing Check Valves. To ensure efficient and safe
More informationMeter, PD Series, K12-S1, S3, S5, S6 and S7
PARTS LIST Meter, PD Series, K12-S1, S3, S5, S6 and S7 Bulletin PO01018 Issue/Rev. 0.4 (3/18) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 2 Bulletin PO01018 Issue/Rev. 0.4 (3/18) Item
More informationUSER S OPERATING AND INSTRUCTION MANUAL
Grand Rapids, Michigan, U.S.A. 49504-5298 USER S OPERATING AND INSTRUCTION MANUAL MODEL 797-21 BREAD SLICER 797S20000CV_21 THIS PAGE WAS INTENTIONALLY LEFT BLANK. GEN020319 RECOMMENDED
More information430B SERIES HORIZONTAL SPLIT CASE PUMP
430B SERIES TWO Stage - DIAGONALLY HORIZONTAL SPLIT CASE PUMP REPAIR PARTS INDEX NOTE! Read and understand the pump and motor instructions before attempting to install, disassemble or repair the pump.
More informationParts List. Item # Part # # Reqd. Description
5.2017.6.f 1 3800 Series Injector 1 2 3 4 5 6 7 21 8 9 20 10 11 12 19 18 17 16 15 14 13 Parts List Item # Part # # Reqd. Description 1 A-0664 1 5 Gallon 430 Reservoir 2 A-0575 1 Thumb Screw 3 A-0172 1
More information485 BACKHOE PARTS MANUAL
85 BACKHOE PARTS MANUAL SERIAL NUMBER: Manual Number: PM08 Part Number: 5608 MODEL NUMBER: Rev. 800-56-00 I www.paladinlcg.com 50 Gay Street, Delhi, IA 5, United States of America 06 --0- Limited Warranty
More informationACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
More informationINSTALLATION, OPERATION, MAINTENANCE & PARTS
OWNER'S MANUAL EXTREME ANGLE CARRIER INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural factors
More informationMODEL I-900 SCRAPER INDEX
I-900 PARTS MANUAL Ashland Industries Inc. Hwy. 13 South P.O. Box 717 Ashland, WI. 54806 877-634-4622 Toll Free - phone 715-682-4622 phone 715-682-9717 fax www.ashlandind.com MODEL I-900 SCRAPER HOW TO
More informationHP Electric PTO Horse Tiller Page 1 of 23 Bolo Tine Assemblies
12090-8HP Electric PTO Horse Tiller Page 1 of 23 Bolo Tine Assemblies 12090-8HP Electric PTO Horse Tiller Page 2 of 23 Bolo Tine Assemblies 1 1901975001 2 S Tine Holder-welded steel, fits left or right
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 3414 SECTION: 67
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL July, 0 ROTARY
More informationMetroPrime 22MPC Self-Priming Centrifugal Pump
Page 1 of 6 prevent priming or reduce pump capacity. OPERATION The 22 MPC-Metropolitan Pump is a self-priming centrifugal pump and only requires priming prior to its initial start. The pump will retain
More informationBD SUPER B SPECIAL Dodge 5.9L Cummins 24v ISB
1 This turbo is intended for high performance applications and is not to be used for towing applications BD SUPER B SPECIAL 1994-2002 Dodge 5.9L Cummins 24v ISB Part# 1045120 PLEASE READ ALL INSTRUCTIONS
More informationDELCO 20/22/25/27MT BREAKDOWN
DELCO 20/22/25/27MT BREAKDOWN J&N UNIT # JanNco # OE PART # LESTER # TYPE VOLT ROTATION TEETH 410-12027 25MT 12 CW 9 410-12028 410-12028R 1109264 6177 25MT 12 CW 10 410-12030R 20MT 12 CW 10 410-12031 410-12031R
More informationMODEL 810 INTRUDER INSTALLATION, OPERATION, MAINTENANCE & PARTS
OWNER'S MANUAL MODEL 810 INTRUDER INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural factors
More informationRTH2610B/RT3210HV DRIVE AXLE PARTS CATALOGUE
RTH2610B/RT3210HV DRIVE AXLE PARTS CATALOGUE IMPORTANT INFORMATION AFTERMARKET PARTS WARRANTY We warrant all new parts for one year from date of shipment to the buyer against defective material or workmanship
More informationALUMINUM & STEEL CAR CARRIERS
OWNER'S MANUAL ALUMINUM & STEEL CAR CARRIERS INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural
More informationBenchmark HD Series Heavy Duty Bench Scale. Installation Manual
Benchmark HD Series Heavy Duty Bench Scale Installation Manual 93631 Contents 1.0 Introduction... 1 1.1 Benchmark HD Specifications...................................................... 1 2.0 Installation...
More informationSPRING COLOR. Blue-black Black. Green-black Black Red-black Blue-black Green-black Green Orange. Red Red-black
BR-G-REG-1329-0313-01-A* Model 122 Industrial Combustion Regulators Construction and Design Features Model 122 Industrial Combustion Regulators For an unbeatable combination of capacity, performance and
More informationASSEMBLY OF TROLLEY TO HOIST
INSTRUCTIONS AND PARTS LIST RIGID MOUNT I-BEAM AND PATENTED TRACK TROLLEYS (PUSH & HAND GEARED - 1/2 THRU 15 TON RATED LOADS) GENERAL Yale Rigid Mount I-Beam Trolleys are designed especially for use on
More informationP SERIES PUMPS. 18mm Versions Nickle-Aluminum Bronze Models: P , P , P , P , P , P , P
P200-3100 SERIES PUMPS 18mm Versions Nickle-Aluminum Bronze Models: P217-3100, P218-3100, P219-3100, P220-3100, P221-3100, P227-3100, P230-3100 Triplex Ceramic Plunger Pump Operating Instructions/ Repair
More information7475 AIR PURGE KIT 7434 DRAIN PURGE KIT FOR MH50 6" VICTAULIC
7475 AIR PURGE KIT 7434 DRAIN PURGE KIT FOR MH50 6" VICTAULIC 2nd Edition CAT692 Begining Serial Number A34000 Owner's Name Dealer's Name Serial Number Date Purchased Model No. TABLE OF CONTENTS CAT692
More informationPB18-G Series Portable Pump Service Parts List
Document Number Issue Date 01/24/07 Rev. Date 7/28/16 PB18-G Series Portable Pump Service Parts List Component Pump Pump Model (Located on Serial Plate) PB18-G2015B PB18-G2015F Exploded View See Page Cross
More informationWaukesha ISR FPO INSTRUCTION MANUAL INTEGRAL SPEED REDUCER SERIES
INSTRUCTION MANUAL Waukesha ISR INTEGRAL SPEED REDUCER SERIES FORM NO.: REVISION: 08/1997 READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR SERVICING THIS PRODUCT. FPO 2 SAFETY Warnings, cautions and
More informationLIMITED WARRANTY DISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGES
Published 08/15 LIMITED WARRANTY Bush Hog warrants to the original purchaser of any new Bush Hog equipment, purchased from an authorized Bush Hog dealer, that the equipment be free from defects in material
More informationI-110 PARTS MANUAL Updated 3/21/01
I-110 PARTS MANUAL Updated 3/21/01 Ashland Industries Inc. Hwy. 13 South P.O. Box 717 Ashland, WI. 54806 877-634-4622 Toll Free - phone 715-682-4622 phone 715-682-9717 fax www.ashlandind.com MODEL I-100,
More informationSECTION 3. PARTS INFORMATION
SECTION 3. PARTS INFORMATION 3-1. INTRODUCTION This section lists the replaceable parts of the Henny Penny Open Fryer, Electric. 3-2. GENUINE PARTS Use only genuine Henny Penny parts in your fryer. Using
More information10260 Retrofit to 10260A Non-Contact Sensor Instructions Kits through -512
10260 Retrofit to 10260A Non-Contact Sensor Instructions Kits 51404974-501 through -512 Document Number Form: 62-86-33-16D Effective: 3-1-01 Supersedes: 11-00 Summary Retrofitting your 10260 actuator from
More informationCOMPRESSORS 09/97 CB-5C-050. Suggested Spare Parts for LB601 and LB601A Compressors: Qty./ Unit
09/97 CB-5C-050 Suggested Spare Parts for LB601 and LB601A Compressors: Part # Description Qty./ Unit Comm. Qty. 794099 Gasket Set - Buna-N, Aluminum T 1 1 1 794259 Suction Valve Sub-Assembly T 2 2 794279
More information4-20 ELECTRONIC VERTICAL FLOW METERS
309-2 Rev. 4.6/07-09 4-20 ELECTRONIC VERTICAL FLOW METERS MODELS VF2D, VF30D, and VF32D OPERATION AND MAINTENANCE MANUAL PARTS LIST FEATURING: *MODEL FC0 FLOWCOM REGISTER INDICATOR-TOTALIZER *CERAMIC BEARING
More informationPROTEUS 26BA 26 Automatic Scrubber Parts List
PROTEUS 26BA 26 Automatic Scrubber Parts List The contents of this manual are based on the latest product information available at the time of publication. Pacific reserves the right to make changes or
More informationHP1 COMPACT POWER UNIT PARTS LIST
HP1 COMPACT POWER UNIT PARTS LIST Item P/N Qty Description No FIG. 1 - ENGINE ASSY 1 23332 1 Engine, Briggs & Stratton 2 18384 1 Oil Filter 3 08667 4 Self Tapping Screw, #10-24 x 3/8 in. 4 23814 1 Air
More informationAxle Components. Demand the original. Axle Components Driveshaft Components Repair Kits
Axle Components Driveshaft Components Repair Kits Axle Components OE Quality Driveline Components Designed for Chrysler RAM Products www.demand.com Axle Components Driveshaft Components Repair Kits Only
More informationCORN HEADER MANUAL: CNH PRE-2012
CORN HEADER MANUAL: CNH PRE-2012 09020201c HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email:
More informationInstruction Manual. RZ Positive Displacement Flowmeters 2AU
Instruction Manual AndersonInstrumentCo.Inc.. 156AuriesvilleRoad Fultonville,NY12072 1-800-833-0081 Fax518-922-8997 Www.andinst.com InstrumentModelNumber InstrumentSerialNumber 2A 2AU 3A RZ Positive Displacement
More informationiqpc912 PARTS MANUAL PC912PM v1
iqpc912 PARTS MANUAL PC912PM v1 See Page 10 See Page 6 & See Page 12 See Page 2 See Page 16 See Page 1 See Page 1 See Page See Page 22 See Page 20 See Page 2 See Page 26 3 16 19 1 17 1 1 11 13 12 10 9
More informationPVC Gasketed Fittings for PVC IPS Pressure Pipe ENGINEERED FOR DURABILITY
For the most up-to-date version of this price list, EFFECTIVE MARCH 4, 2019 ENGINEERED FOR DURABILITY HARRINGTON CORPORATION P.O. BOX 10335 LYNCHBURG, VIRGINIA 24506-0335 For the most up-to-date version
More informationHP30 Slab Saw Owner s Manual and Operating Instructions
HP30 Slab Saw Owner s Manual and Operating Instructions MADE IN USA Revision 07 09.0 Manual Part No. 67 Caution: Read all safety and operating instructions before using this equipment. This manual MUST
More informationSR75 BIG GUN SR75 BIG GUN PARTS LIST. SR75 WITH hd100 SR75 WITH CB75. NOTE: not approved for center pivot end gun application
SR75PL-5 SR75 BIG GUN SR75 BIG GUN PARTS LIST SR75 WITH hd100 Bearing Assembly SR75 WITH CB75 Bearing Assembly NOTE: not approved for center pivot end gun application 10347-xxx Body Assembly, SR75 6089
More informationDISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG
BUNN T3,T3A T6,T6A DISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement
More informationDISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG
BUNN COMBO GRINDER DISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement
More informationMODEL EF Full Circle Tire Spreader
MODEL EF Full Circle Tire Spreader Installation, Operation & Repair Parts Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 REV. 062917 P/N: 81-0050C CAUTION
More informationPARTS MANUAL. SERIAL NO: to BAND SAWING MACHINE
PARTS MANUAL MODEL: TF-2025M SERIAL NO: 543-99101 to BAND SAWING MACHINE MACHINE SPECIFICATIONS MODEL VOLTAGE CYCLE PHASE SERIAL NO. For your information and future reference, insert pertinent data concerning
More informationDISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG
BUNN TW TWF DISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement
More informationCOMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES 2.01 COMBINATION RESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVE
PROJECT NAME LOCATION COMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900
More informationCDS-JOHN BLUE COMPANY
HYDRAULIC DRIVE KIT FOR VARIABLE RATE OR MANUAL CONTROL SYSTEMS PARTS AND INSTALLATION MANUAL CDS-JOHN BLUE COMPANY DIVISION OF ADVANCED SYSTEMS TECHNOLOGY, INC. 290 Pinehurst Drive - Huntsville, Alabama
More informationSECTION 7. PARTS INFORMATION
SECTION 7. PARTS INFORMATION 7-1. INTRODUCTION This section lists the replaceable parts of the Henny Penny Model EEG fryer. 7-2. GENUINE PARTS Use only genuine Henny Penny parts in your fryer. Using a
More informationMODEL SUPER P Parts List
MODEL Parts List UNIT SERIAL NUMBER MANUAL NUMBER: EFFECTIVE 05/2016 1330 76TH AVE SW CEDAR RAPIDS, IA 52404-7052 PHONE (319) 363-8281 FAX (319) 286-3350 www.highwayequipment.com Copyright 2007 Highway
More informationSERVICE PARTS LIST BULLETIN NO M18 FUEL 1-1/2" Magnetic Drill CATALOG NO. G56A
65(7x) 48 64 CATALOG NO. SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M18 FUEL 1-1/2" Magnetic Drill 67 76 2787-20 77 83(3x) STARTING SERIAL NUMBER 79 G56A Torque Chart on
More informationSHAW-BOX INSTRUCTIONS AND PARTS LIST SHAW-BOX RIGID MOUNT I-BEAM AND PATENTED TRACK TROLLEYS (PUSH & HAND GEARED - 1/2 THRU 15 TON RATED LOADS)
SHAW-BOX INSTRUCTIONS AND PARTS LIST SHAW-BOX RIGID MOUNT I-BEAM AND PATENTED TRACK TROLLEYS (PUSH & HAND GEARED - 1/2 THRU 15 TON RATED LOADS) GENERAL SHAW-BOX Rigid Mount I-Beam Trolleys are designed
More informationSP-850 INSTALLATION, OPERATION, MAINTENANCE & PARTS
OWNER'S MANUAL SP-850 INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural factors only, not
More information320 Series Models 325, 326, 327
0 Series Models,, ROTARY MOWER Published 0/ PARTS MANUAL SECTION An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and
More informationService Parts. John Deere 3029DF 3029TF 3029TF270. Engine. Engine Models: Generator Models: 20ROZJB REOZJB 20DSJB DSEJB.
Service Parts Engine Engine Models: John Deere 3029DF 3029TF 3029TF270 Generator Models: 20ROZJB 20--40REOZJB 20DSJB 20--40DSEJB TP- 12/03b Table of Contents Description Page Description Page Introduction...
More informationRTH2610B/RT3210HV DRIVE AXLE PARTS CATALOGUE
RTH2610B/RT3210HV DRIVE AXLE PARTS CATALOGUE IMPORTANT INFORMATION AFTERMARKET PARTS WARRANTY We warrant all new parts for one year from date of shipment to the buyer against defective material or workmanship
More information